Philips SDV8625T
Contents
1. inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps preven potentially negative consequences on the environment and human health The packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging Y When this logo is attached to a product it means a financial contribution has been paid to the associated national recovery and recycling system 2011 Koninklijke Philips Electronics N V All rights reserved Reproduction in whole or in part is prohibited without the written consent of the copyright owner Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2 Your SDV8625T 27 Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome EN 5 English What s in your box a ID 1x N D 2x 2x 4x 4x m E A OO DEE i 4x 1x A Ge 1x 1 SDV8625T 27 antenna O Power supply 100 240V AC 6V DC 500mA O Wall Mast bracket O Nut 5 U Bolts Mast clamps D Nuts with lock washers 6 EN 25mm wood screws O 6m coax cable with connectors Weather boot a Power2. injector 2 Plastic anchors 3 Washer 40mm Hexagon screw 3 Get started Installation Installation information This antenna uses a power inserter module to power the antenna amplifier It is essential for proper operation of this antenna system that the power inserter be connected between the antenna and any devices such as splitters matching transformers networks etc a Antenna with built in amplifier Determine the signal strength Before Installation determine the best location for optimum reception It is important for the antenna to have an unobstructed path to the transmitter For best results ensure the antenna faces the location of the transmitter Note Indoor choose a location near a window which gives the antenna a clear view of the transmitter Note Place the antenna away from metal surface to avoid interference 7 SE For indoor wall mount installation Note Complete all assembly work on the ground before installing on a wall or an antenna mast Use the nut O washer and hexagon screw to attach the antenna to the wall mast bracket b Power inserter module Splitters or matching transformers not included d TV or video device 2 Use the screw holes of the wall mast bracket as a guide to mark position for the wood screws EN 7 English For outdoor mast mount installation Compl
3. Register your product and get support at www philips com welcome SDV8625 1 27 EN User manual PHILIPS Contents Important Safety For indoor use For outdoor use Notice for USA 4 Notice for Canada 5 Recycling 5 Your SDV8625T 27 5 What s in your box 6 Get started 7 Installation 7 Connect to the TV 0 Set up a digital tuner with this antenna 10 Frequently asked questions 1 Warranty and service 1 Glossary 2 EN English 1 Important Safety This manual contains important information about the Philips indoor outdoor television antenna Read it carefully before you start the installation and setup For indoor use e The product shall not be exposed to dripping or splashing and no objects filled with liquid such as vases shall be placed on the product e To completely disconnect the power input the main plug of the product shall be disconnected from the main AC outlet e Where the main plug is used as the disconnect device the disconnect device shall remain readily operable No naked flame sources such as lighted candles should be placed on the product For outdoor use fthis is the first time you install an antenna for your own safety as well as others seek professional assistance e Perform as many functions as possible on he ground Select your installation site carefully Remember electric power lines and phone lines look alike For your sa
4. allation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help All other devices shall bear the following statement in a conspicuous location on the device This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Notice for Canada Class B Clause This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications This Class B digital apparatus complies with Canadian ICES 003 Recycling ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused Never dispose of your product with other household waste Please
5. ete all assembly work on the ground Raise the completed antenna after assembly 1 Use the nut O washer and hexagon screw to attach the antenna to the wall mast bracket 3 For wood wall Use the wood screws to fix the antenna to the wood wall firmly 1 8 2 Insert U bolts into the holes of the wall mast bracket Slide the mast clamps onto the U bolts Attach the four nuts with lock washers to the U bolts For concrete wall Drill four holes on concrete wall put four plastic anchors into the holes Use wood screws to fix the antenna to the concrete wall firmly 5 16 3 Attach the assembly to the mast firmly Rotate You can make a 90 degree rotation to the antenna or the mounting post 4 Rotate the mast in its mount to adjust the direction 5 Attach the coaxial cable O to the F connector on the underside of the unit Position the weather boot over the connection EN English Connect to the TV Note As previously noted the amplifier Power injector Power supply must be placed in line between the antenna and any splitter or additional devices 1 Connect the coaxial cable from the antenna to the connector labeled ANT on the power injector 2 Connect the power injector to the antenna input on the TV digital set top box splitter or other devices 3 Connect
6. fety assume that all overhead lines may cause fatal injury e Ensure that the installation site is structurally capable to support all loads weight of the antenna weight of ice weight of snow and wind force e Properly sealed against leaks at the installation site e Do not install your antenna on a wet or windy day e Ifthe assembly starts to drop get away from it immediately Remember the antenna mast cable and metal guy wires are all excellent conductors of electrical current Even the slightest touch of any ofthese parts to a power line can cause electrocution and death e Ifany part of the antenna system should come in contact with a power line don t ouch it or try to remove it yourself Call your local power company They will remove it safely e Ifan accident occurs with the power ines call for qualified emergency help immediately Notice for USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular inst
7. hs Can the antenna be powered by a DC power supply in a boat RV or camper Yes there is a DC power socket located at the back of the antenna Plug your cable adapter into the antenna and then into your power source Where should place the antenna in order to get the best reception possible Choose a location near a window which gives the antenna a clear view of the transmitter Tip For best reception place the antenna away from metal surface to avoid interference Can set up this antenna with a digital tuner Yes this antenna can be set up with a digital tuner see the section on Set up a digital tuner with this antenna 5 Warranty and service Warranty information can be found at www philips com welcome For technical support send us an emai with the model number of the product and a detailed description of your problem o accessorysupport philips com Limited One Year Warranty Philips warrants hat this product shall be free from defects in material workmanship and assembly under normal use in accordance with the specifications and warnings for one year from he date of your purchase of this product This warranty extends only to the original purchaser of the product and is not transferable To exercise your rights under this warranty you must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase For customer support or to ob
8. n covered by a surrounding copper shield and finally an insulating jacket An unbalanced transmission line with constant impedance In audio this type is commonly used for low level line signals terminated in RCA connectors F FM Frequency Modulation In radio broadcasting a method of modulation in which the frequency of the carrier voltage is varied with the frequency of the modulation voltage H HDTV High Definition Television t is a digital television broadcasting system with higher resolution than traditional elevision systems standard definition TV or SDTV HDTV is digitally broadcast he earliest implementations used analog broadcasting but today digital television DTV signals are used requiring less bandwidth due to digital video compression U UHF Ultra high frequency In radio or TV broadcasting it is the frequency range of electromagnetic waves which lies between 300 MHz and 3 GHz 3000 MHz V VHF Very high frequency In radio or TV broadcasting it is the frequency range of electromagnetic waves which lies between 30 MHz and 300 MHz PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved DFU_SDV8625T_27_V1 1
9. tain warranty service please call 1 919 573 7854 THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES The liability of Philips is limited to repair or a its sole option replacement of the product Incidental special and consequential damages are disclaimed where permitted by law This warranty gives you specific legal rights You may also have other rights that vary from state to state Warranty information can also be found at www philips com welcome EN 11 English 6 Glossary A Amplifier A device either a single stage or a large scale circuit with multiple stages for creating gain Le it makes small signals larger Antenna A device such as a rod or wire which picks up a received radio frequency signal or radiates a transmitted RF signal ATSC Advanced Television Systems Committee The Advanced Television Systems Committee Inc is an international non profit organization developing voluntary standards for digital television The high definition television standards defined by the ATSC produce wide screen 16 9 images up to 1920x1080 pixels in size more than six times the display resolution of the earlier standard However many different image sizes are also supported so that up to six standard definition virtual channels can be broadcast on a single 6 MHz TV channel C Coaxial A single copper conductor surrounded with a layer of insulatio
10. the power supply plug O to the power injector and then plug the power supply adaptor into a 100 240V AC receptacle 10 EN The power injector and power supply are for indoor use only EJ This antenna includes a 19 7ft roll of 3C 2V coaxial cable If this is not adequate for your needs replace the cable with a RG 6 coaxial cable instead of adding an extension Set up a digital tuner with this antenna You can install available channels with the digital TV tuner This automatic process is part of the setup of the tuner Ensure the antenna has set up properly before the tuner can receive viewable channels There are two ways to connect the antenna to the TV e Connect the antenna to a digital tuner If the signal strength is good enough the channels can be memorized in the tuner automatically e Connect the antenna directly to the TV Tune to the analogue channels and find the best antenna location Then re connect the antenna to the digital tuner Ensure the signal strength is good enough before you install the channels with the tuner 4 Frequently asked questions Can this antenna work with Analogue transmissions Yes this antenna can receive analogue television broadcasts in the UHF and VHF bandwidths Can this antenna receive digital or work with ATSC broadcasts Yes this antenna is designed to receive ATSC and HDTV broadcasts in the UHF amp VHF bandwidt
Download Pdf Manuals
Related Search