Strong SRT 7805
Contents
1. STRONG PART 2 English DIGITAL TV WARNING NEVER power off the receiver or pull the mains plug during the software upgrade process Doing so might cause irreparable damage to your receiver and will void your warranty A 1 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver Please check the receiver according to the procedures as explained below If the receiver does not work properly after checking it please contact your local Service line or STRONG dealer Alternatively you can send a support mail via our website www strong tv NEVER open or disassemble your receiver This may cause a dangerous situation and will void the warranty Symptom The display on front The power cord adapter is not Check that the power cord is plugged in to panel does not light plugged in the wall outlet Make sure power adapter is up connected correctly on the rear panel No picture or sound Wrong connection or setting of Connect the Audio Video output of the the Audio Video output receiver correctly to the TV set and check the settings in the menu Control Panel gt System Setup User Setup Press the MUTE button TV is powered off Turn TV on Wrong Input selected Select the correct TV Input No Signal No picture The receiver can t receive the Check the antenna cable replace the signal cable or connect the cable to the receiver tightly Incorrect values of some tuner Set the values of tun2. To safely remove the external USB storage device press the GREEN button Use EXIT to go back to the previous menu WARNING The Format function will delete all records data and information from your USB device STRONG will not take any responsibility for damaged or lost data on the USB device Please make a backup copy of important data on your USB device before you are going to use it with your receiver Please be aware that formatting in Linux file system will have the consequence that Windows will not recognise such an USB device anymore If you want to use your E2FS formatted USB storage device under Windows we recommend you to use tools available in the WWW for example the program Ext2 Installable File System 7 4 2 Record Manager The Record Manager can be used for the playback of previously recorded programs to delete rename and lock them Use A V to select a file in this folder Press OK to start the playback of the desired recording Press INFO during playback to see details form this record If you have already watched this recording then there will be a message displayed to ask you if you want to start the playback from the beginning or if you want to start from the point you stopped watching before WARNING HD channel recordings are limited in playback concerns If this limit has passed an HD message appears on your screen Then this file can not be watched anymore and you can delete it to get free space for new re
3. 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below m Refer to the user manual of your TV and your antenna m Make sure that the SCART HDMI cable and outdoor components are a good condition and the SCART HDMI connections are well shielded and from good quality This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow 2 www strong tv PART 2 English STRONG DIGITAL TV WARNING Indicates warning information Note Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver BOLD CHARACTER Move to Represents a menu item within a window Italic Character 1 4 Accessories m User s Manual m 1 Remote control unit 1 Main Power adapter with power cord m 1 HD smart card m 2x Batteries AAA type WARNING The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries Ifrechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices It is recommended to use USB 2 0 high speed storage devices If your device is not compatible to USB 2 0 specifications recording playb
4. 7 2 1 1 Language Setup Here you can set the preferred OSD Audio and Subtitle languages settings Use Y to highlight the setting you wish to change and lt P to change the value of the setting Press OK to display a list of all available options for the chosen setting Press EXIT to exit and save settings OSD Language This setting affects the menu language of your receiver All menu s and messages will be displayed in this language Audio is the preferred audio language The receiver will automatically switch audio to the preferred language whenever available Subtitle Subtitles will be displayed in the selected language whenever available 7 2 1 2 Time Setup The Time Setup allows you to set the way the receiver collects and adjusts the time You can also adjust the Auto Standby function here for an automatic switch to standby after a desired time to save power Use V to highlight the setting you wish to change and lt P or 0 9 to change the value of the highlighted setting Press OK to display a list of all available options for the chosen setting Local Time Adjust the correct time zone you are located based on GMT Summer Time Select OFF or ON to adjust the current setting for summer time Date The date is normally synchronized by satellite signal If you like to change another date press OK to call calendar and use lt gt to change date Current Time The time is normally synchronized by satellite signal We recommen
5. Enter with the numeric buttons 0 9 first default PIN code 0000 of 4 digits Enter now your new PIN and confirm again PIN A successful change of PIN is confirmed by an on screen message Use EXIT to go back to the previous menu A WARNING Please be aware that the CA PIN is the PIN from your Smart Card changing it has nothing to do with receiver PIN code 7 4 Multimedia The Multimedia menu allows you to see detail information of your connected USB device handle your records and give you access to your music and pictures on USB device It consists of the following sub menus USB info amp Format Record Manager and Music amp Photo Player Choose the desired sub menu with Y and press OK to advance 7 4 1 USB Info amp Format The USB Info amp Format menu displays all details from the connected USB storage device It contains information about the storage capacity and about the current free space for new recordings If you want that all functions are fully supported as Jpeg and MP3 play back ensure that either the USB device is already formatted in FAT or FAT32 system on your computer When you are going to use it only for record and playback we recommend you to format it to E2FS Linux file system in this menu for the best performance of record and playback Use Y to select HDD Format E2FS and press OK button to start formatting of the connected USB device www strong tv 13 STRONG PART 2 English DIGITALTV
6. Verwendung von Digitalempf ngern ohne HD Zertifizierung kann es zu technischen Nutzungseinschr nkungen des HD Services kommen auch wenn HD zertifizierte Common Interface Empfangsmodule verwendet werden Insbesondere kann es sein dass die Entschl sselung bzw Darstellung einzelner Programmangebote nicht m glich ist Der Nutzer hat deswegen gegen ber HD PLUS weder einen Gew hrleistungsanspruch noch ein Sonderk ndigungsrecht 3 0 SERVICEPAUSCHALE LAUFZEIT UND VERL NGERUNG DES HD SERVICES 1 F r die Nutzung des HD Services f llt eine Servicepauschale an Diese ist f r zw lf Monate im Voraus durch den Kauf einer HD Karte bzw die Verl ngerung des HD Services auf einer bereits aktivierten HD Karte soweit diese nicht gem Ziffer 1 7 f r eine Verl ngerung gesperrt ist zum jeweils aktuell g ltigen Preis siehe www hd plus de preise zu entrichten Die Verl ngerung des HD Services erfolgt mittels der von HD PLUS angebotenen Zahlungsverfahren siehe www hd plus de reload Im Rahmen von Vermarktungsangeboten beispielsweise in Verbindung mit dem Kauf eines f r HD zertifizierten Digitalempf ngers werden HD Karten ausgegeben die bereits eine Freischaltung ber 12 Monate f r den HD Service ohne weitere Kosten f r den Nutzer beinhalten 2 Die Laufzeit der Nutzung des HD Services beginnt mit Aktivierung der HD Karte Aktiviert wird eine Karte wenn sie in den daf r vorgesehenen Schacht eines f r HD zertifizierten Digi
7. 240 V AC 50 60 Hz 5 1 1 Power consumption max 30 W typ 13 W without external device Power consumption in stand by 1 30 W without external device Operating temperature 5 35 C Storage temperature 20 60 C Operating humidity range 25 75 RH non condensing i Size Wx Dx H in mm 265 x 190 x 45 Weight 0 90 kg EAN code SRT 7805 8717 185 445 398 A 3 ALLGEMEINE GESCH FTSBEDINGUNGEN HD 1 0 GELTUNGSBEREICH VERTRAGSGEGENSTAND UND HD KARTE 1 Diese allgemeinen Gesch ftsbedineungen der HD PLUS GmbH mit Sitz in der Betastra e 1 10 85774 Unterf hring HD PLUS gelten ausschlie lich f r den HD Service HD PLUS berl sst dem Nutzer nach Ma gabe dieser allgemeinen Gesch ftsbedingungen den Besitz an einem Datentr ger HD Karte Die auf der HD Karte gespeicherte Software bzw Daten zusammen die HD Software sind lediglich technische Voraussetzung zum entschl sselten Empfang bestimmter digital verschl sselt ausgestrahlter TV Angebote Programmangebote ber einen Digitalempf nger mit HD Zertifizierung HD Service HD PLUS r umt dem Nutzer eine nicht ausschlie liche nicht bertragbare Lizenz zur bedingungsgem en Nutzung der auf der HD Karte befindlichen HD Software zum Zwecke der vertragsgem en Entschl sselung von Programmangeboten ein Dieses Recht ist auf das Gebiet der Bundesrepublik Deutschland beschr nkt Es ist dem Nutzer untersagt
8. 4 0 STARTING UP FOR THE FIRST TIME 4 1 Language selection 4 2 Location selection 4 3 Output selection 4 4 Channel installation 4 5 First activation of your HD smart card 5 0 QUICK GUIDE TO USING YOUR RECEIVER 6 0 OPERATION 6 1 Changing channels 6 2 Info Banner 6 3 Audio language and Audio mode 6 4 Teletext and Subtitles 6 5 HDMI video format 6 6 EPG Electronic Programme Guide 6 7 Recording WWW OO OO OO GA OA ON ON O R WWWNNNN 6 8 Time shift 6 9 Playback of recording 7 0 MENU 9 7 1 Channel Setup 10 7 2 Control Panel 11 7 3 CAS 13 7 4 Multimedia 13 7 5 Program Guide 15 8 0 OTA SOFTWARE UPGRADE 15 TROUBLESHOOTING 16 A 2 SPECIFICATIONS 17 A 3 ALLGEMEINE GESCH FTSBEDINGUNGEN HD 18 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004 108 EEC and 73 23EEC RoHS 2002 95EEC Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Subject to alterations In consequence of continuous research and development technical specifications design and appearance of Stand M rz 2010 products may change Dolby and the double D symbol are registered trademarks of Dolby Laboratories ASTRA is a registered trade mark 0180 501 49 91 of SES ASTRA all other product names are trademarks or registered trademarks of their respective owners 0 14 Min
9. 45 Ms s DVB S2 8PSK QPSK 10 30 Ms s FEC decoder Auto 1 2 2 3 3 4 5 6 7 8 in DVB S mode 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 in DVB S2 mode 3 5 2 3 3 4 5 6 8 9 9 10 in 8PSK mode Video Decoder Profile level 2 MP ML MP HL MPEG 4 H 264 AVC Input rate Max 90 Mbit s Aspect ratio 4 3 and 16 9 Pan amp Scan Letterbox Frame rate 25 Hz Video resolution 576i 576p 720p 1080i Audio Decoder Audio decoding 1 Layer 1 amp 2 Dolby Digital Dolby Digital Plus Audio mode Stereo Dual Mono Joint Stereo Mono AC3 Sampling rate 32 44 1 48 kHz Dolby is a registered trademark of Dolby Laboratories Tuner Typel F Type IEC169 24 Female Input frequency range 950 2150 MHz RF impedance 75 Ohm unbalanced Signal level 65 to 25 dBm LNB power 13 5 18 V DC 596 max 0 5 A overload protected DiSEqC versions V1 0 V1 2 GOTO X System amp memory Main processor BCM7325 Broadcom Flash memory 16 Mbytes System memory 256 MBytes Multimedia Audio playback MP3 format Picture view JPEG format STRONG can not guarantee play back of every JPEG format size or MP3 sample rate Connectors SAT IN HDMI 1 3 TV SCART RGB CVBS Audio L amp R 3 RCA Audio L amp R and Video CVBS Component Y amp Pb amp Pr S PDIF optical USB 2 0 DC Power jack input 12 V DC max 4A www strong tv 17 STRONG PART 2 English DIGITAL TV General Data Supply voltage 100
10. Quality bars showing red or yellow colours then the satellite signal is too weak Please try to adjust your satellite dish first to improve the signal At the first time installation there was performed the HD Channel Scan from APS After this successful scan process you can choose following of the additional possibilities Select Search Start and press OK A new menu will be opened on the right side of your screen called Options Use this menu to perform an Automatic TP manual or Network channel search one or more satellites Use 4 Y to highlight and OK to select an option Start Auto Scan Use this option to perform a full channel scan on the selected satellite under the below mentioned conditions TP Search Start Use this option to perform a scan on the selected transponder only Network Search Start Use this option to receive new launched channels from the selected satellite The receiver will perform an additional search for channels from the NIT table NIT Network Identification Table Search Mode Select All to scan all channels including scrambled channels or FTA to scan for Free To Air channels only NIT Search Select OFF if you don t want to perform a network search or set ON to perform a network search 10 www strong tv PART 2 English STRONG DIGITAL TV DiSEqC repeat Here you can set x or 2 x time s of DiSEqC repeat if you are using a multiple switch system or a DiSEqC motor be
11. aus deutschen Festnetz STRONG 2010 All rights reserved 11 2010 042 Min max aus Mobilfunknetzen www strong tv 1 STRONG PART 2 English DIGITALTV 1 0 INTRODUCTION 1 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER m In a closed or poorly ventilated cabinet directly on top of or under any other equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or any other equipment that generates heat to rain or intense moisture to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects such as loudspeakers transformers etc Do not use a damaged power cord It may cause a fire or an electrical shock Do not touch a power cord with wet hands It may cause an electric shock When the receiver is not used for a long period oftime you should unplug the power from the wall socket Do not use alcohol or ammonia based liquids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the mains voltage supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock m Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside Safety Precautions m
12. can directly exit to viewing mode 22 EXIT In viewing mode removes appearing messages Info banner in OSD one step back or cancel actions 23 TV RAD Toggles between TV and Radio mode 24 ASPECT Show information about the screen format in broadcast 25 HISTORY Displays the last watched channels list in viewing mode including EPG information 26 SIGNAL Display signal and quality of satellite signal from current selected satellite and channel 27 4 Fast rewind 28 PLAY Opens the playback list in viewing mode 29 Stop 30 Fast forward 31 In viewing mode starts Timeshift in Multimedia for Pause function 32 Starts recording ofthe actual broadcast 33 FI F4 No function 3 0 CONNECTIONS 3 1 Basic connection using a Scart cable Fig 4 3 Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good quality coax cable and suitable F connector plugs Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and the other end to the SCART input of your TV Plug the power adapter amp cord to a suitable wall outlet 3 2 Basic connection using an HDMI cable T 3 Fig 5 Connect the LNB of your satellite dish to the SAT IN connector of your receiver using a good quality coax cable and suitable F connector plugs Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to the HDMI input of your TV P
13. directly as indicated on the bottom of the Teletext screen Press EXIT to go back to viewing mode Note VBI Teletext on your TV set is not supported Please use the Teletext of the receiver If you are connected via HDMI it could be the case that you will observe that the TV set is switching resolution in case there are different resolutions broadcasted on the channels This is no abnormality as this is a required behaviour followed on the specifications of this product 6 5 HDMI video format If you are connected via HDMI it could be the case that you will observe that the TV set is switching resolution in case there are different resolutions broadcasted on the channels This is no abnormality as this is a required behaviour followed on the specifications of this product 6 6 EPG Electronic Programme Guide The Electronic Programme Guide is a very useful function that allows you to watch programme schedules and information on screen and to select programs for recording Press the GUIDE button to open the EPG overview Use V to select the desired channel and lt P to move within the program schedules If the desired event is selected press INFO to open the detailed information Use Y button to scroll in case there is more than one page of information Press INFO or RED to go back to the EPG overview Within the EPG you can also set a Timer for the selected event by pressing OK Then you can choose if you want to Set a Reminder for Ti
14. etc to this port To connect to the original included main power adapter Input 110 240 V 50 60 Hz Output 12 V DC there and connect main power adapter to the original included power cord Fig 3 Turns the receiver ON Standby Mutes the audio output of the receiver Channel number and numeric value input Opens the favourite group selection Opens the audio and subtitle selection menu Displays the current Teletext of this channel if available Opens the playback list in viewing mode Opens the Multimedia menu in viewing mode Toggles between the two last watched channels Displays the EPG Electronic Program Guide Increasing decreasing of the volume level Switches to next previous channel in viewing mode or scrolls page wise in lists Press once to display channel information Press twice to call extended program info For Teletext function in OSD for specific functions www strong tv PART 2 English STRONG DIGITAL TV 15 GREEN For Teletext function in OSD for specific functions 16 YELLOW For Teletext function in OSD for specific functions 17 BLUE In viewing mode opens the EPG overview for Teletext and in OSD for specific functions 18 Scrolls channel and EPG information up down in viewing mode in OSD for navigation 19 4 In OSD for navigation 20 OK In viewing mode displays the channel list in Menu mode activation confirmation of the specific item 21 MENU Opens the menu in viewing mode within menu you
15. get info about the current channel and program Press INFO twice to see program details about the current channel Note Program information is only displayed when available Availability depends on the broadcaster 6 3 Audio language and Audio mode Press OPT button in viewing mode to display this Optional Settings menu In this menu you can select the Audio language and Audio Mode In the audio language selection you can select another language or Dolby digital ifthe selected channel supports this option Selection of Audio mode allows you to select between Stereo Left or Right audio channel In case the channels does not support there will be no change to hear 6 4 Teletext and Subtitles Your receiver includes a fully featured Teletext To access Teletext press the TXT button in viewing mode Then the menu to select Teletext amp Subtitle Option will be displayed when you press it for the 1st time Use the Y buttons to select an option and use lt P to change the setting In case of DVB subtitles availability you can select them to be displayed and press OK there to confirm If only one Teletext language is available the receiver will show the abbreviation of the used one and you can t select this item Please choose Goto Teletext to display the Teletext on screen then you can use the 0 9 buttons to input the number of the page you wish to see The coloured buttons of the remote control allow you to display selected pages
16. gt TRONG Digitaler High Definition Satelliten DIGITAL TV Receiver SRT 7805 Sch 7805 y s STRONG ORSTALPLUS m s amp 5 3 lt Bedienungsanleitung CX DOLBY DIGITAL PLUS by ASTRA imers Lock www strong tv STRONG Fig 1 Fig 2 Fig 3 MAGRAVSON sel 7 8 9 CO C G3 1 0 c 152 gt 4 Ge 5 9 LN oe 11 2 FS 12 LZ 14 151 Val 21 ex 2 Aspect History 25 nu er leader 31 L Ir 32 33 C TELEVISION SCART ss 0000 VIDEO AUDIO Fig 4 TELEVISION u er 5 Es OS DE POWER Fig 5 igital High Def ite Receiver d E joo gum gt VIDEO amm TV SCART Hom Fig 6 PART 2 English STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INTRODUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 1 5 Usage of external USB devices 1 6 General Information 2 0 YOUR RECEIVER 2 1 DEFAULT PIN CODE 0000 2 2 Front Panel 2 3 Rear Panel 2 4 Remote Control Unit 3 0 CONNECTIONS 3 1 Basic connection using a Scart cable 3 2 Basic connection using an HDMI cable 3 3 Connecting multiple fixed dishes using a DiSEqC 1 0 switch
17. or OFF In viewing mode you can press the OPT button to enter this setting Advanced Setup In User Setup menu you can press the BLUE button to enter the advanced settings It is strictly recommend not to change any of these settings unless you are absolutely sure and an advanced user LNB Power Allow you to switch OFF or ON power of LNB DiSEqC repeat Repeat command for commit switches 1 2 and OFF Power save Mode This setting will set the receiver in low power mode during standby in order to reduce standby power below 2 watt If you select this option to ON be aware that wakeup of your receiver will take more then one minute Pre Wakeup min Here you can set the pre wake up time for your receiver if a Timer recording is configured and you are using the Power save Mode during Standby 3 4 and 5 min HDCP Setting To switch ON or OFF the control key for HD screens If you select OFF will only low video resolution available Press OK to confirm and to exit this menu 12 www strong tv PART 2 English STRONG DIGITAL TV 7 2 2 Factory Default A factory default will reset all settings of the receiver to the factory default To reset the receiver you have to enter your PIN code DEFAULT PIN 0000 Select Factory Initialization and Press OK You have to enter your PIN code again to make 100 sure that you want to perform this action After the reset the receiver will start up with the Setup Wizard WARNING A fa
18. to continue 4 3 Output selection Here you can select the connection type you use to your TV screen Select HDMI YUV ifyou use a HDMI or a component cable to HD TV screen Select SCART if you re using a Scart cable to normally TV screen If SCART is selected then select as well they correct size of you TV screen Use Y to move the highlight and gt to change settings Press OK to confirm and to continue Note HD services channels can only be seen if correct selection is made 4 4 Channel installation This receiver is equipped with a new fast channel installation system by Astra 19 2 satellite called APS Per default all settings are correctly adjusted for a fast installation on Astra 19 2 Before you press OK button to start the scan process first check the Strength and Quality bars on the bottom of this menu Green bars indicate a good signal and you can proceed Yellow bars indicate that the signal condition is nearly acceptable and Red indicates bad signal Adjust your dish for maximum possible signal strength and quality Once the signal cannot be improved anymore fix the dish on this position and press OK to continue and start APS scan process Once receiver finished this scan process a selection will popup with View or Next Select View and press OK to enjoy and watch the digital satellite channels directly Select Next if you want to scan for more satellites channels Refer to chapter 7 1 1 CHANNEL SCAN for detailed
19. HD PLUS HD PLUS wird den Nutzer von einer nicht unwesentlichen vor bergehenden Leistungseinstellung oder beschr nkung unterrichten Diese Mitteilungspflicht besteht nicht wenn die Unterrichtung nach den jeweiligen Umst nden objektiv vor Beginn der Leistungseinstellung oder beschr nkung nicht m glich ist oder die Beseitigung bereits eingetretener Unterbrechungen verz gern w rde HD PLUS beh lt sich vor ohne weitere Ank ndigung Wartungs und Instandhaltungsarbeiten an ihren technischen Anlagen zur Aufrechterhaltung bzw Verbesserung des HD Services durchzuf hren In diesem Wartungsfenster kann es zu Unterbrechungen oder Beeintr chtigungen beim Empfang der Programmangebote kommen die den Nutzer jedoch nicht zur Minderung berechtigen Bei einem Versto gegen diese Nutzungsbedingungen oder dem begr ndeten Verdacht eines Versto es durch den Nutzer insbesondere im Sinne der vorstehenden Ziffern 4 und 5 ist HD PLUS nach eigenem Ermessen berechtigt 7 3 1 den Nutzer vor bergehend oder dauerhaft von der Nutzung des HD Services auszuschlie en und oder 7 3 2 das Nutzungsverh ltnis au erordentlich gem Ziffer 10 1 zu k ndigen HD PLUS wird den Nutzer vor Ausschluss oder K ndigung abmahnen wenn nicht der Versto so schwer wiegt dass HD PLUS eine Fortsetzung des Nutzungsverh ltnisses nicht zumutbar ist Bei einem auf dem Verschulden des Nutzers beruhenden Nutzungsausschluss gem Ziffer 7 3 bleibt der Nutzer
20. LNB type if you are using another LNB as Univ LNB model As this is the common used LNB it is set per default DiSEqC If you are using a DiSEqC switch in order to connect more dishes select the correct used switch type Select DiSEqC 1 0 for maximum 4 dishes DiSEqC 1 1 for maximum 16 dishes and select None if you don t use any switch DiSEqC Port If you are using a DiSEqC switch you need to set the correct DiSEqC port which belongs to the connected satellite Transponder Select this option if you want to scan manually or check the signal on the desired transponder frequency Use lt P to select the transponder of you choice or open the Transponder list of the selected satellite with OK Motor Control If you are using a DiSEqC motor to install multiple satellites Select the according setup type with lt P Select DiSEqC 1 2 for manual setup of each satellite or select GOTO X for automatic calculation after you have adjusted the 0 position and corresponding Cartesian coordinates of your location Note Please consider that GOTO X must be supported from your Motor as well Motor Setting Here you can setup the necessary settings according to the used Motor Control Adjust and store these settings correctly in order to be able to proceed with Search Start Search Start Before you start the scan process please make sure that all settings are made correctly and Strength and Quality bars are showing green colours If the Strength and
21. Never open the receiver cover It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards and your warranty will be void Refer all maintenance or servicing to suitably qualified personnel When you are connecting cables be sure that the receiver is disconnected from the mains supply voltage Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your local dealer or contact the appropriate service 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children For transporting the receiver from one place to another or if you are returning it under warranty conditions make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty
22. Press Il again to start time shifted playback To stop Timeshift press During the Time shift press EXIT to remove time shift banner and press PLAY to recall the time shift banner During time shift you can press or buttons to jump within time shift file Press more times on these buttons to change the speed You can choose between 2x 4x 8x 16x and 32x On the HD channels it can happen that some events are protected and fast forward rewind in time shift is not possible or limited in specific concerns Note Time shift is only working correctly when a fast USB storage device such as an USB2 0 HDD USB storage device is connected to the receiver Further we recommend you to format the USB storage device to E2FS format for the proper function of record playback and Time shift please see special conditions in chapter 1 5 USAGE OF EXTERNAL USB DEVICES Distorted picture and or audio during Time shift indicate a low USB device speed STRONG cannot guarantee for USB devices used Especially when Timeshift is activated at channels with high data rate High quality SD HD STRONG cannot guarantee an accurate Playback of the Time shifted file 6 9 Playback of recording After you have already made some recordings with this receiver you can simply play them back Press F LIST gt PLAY button to open the Playback List Use Y to select a record you want to playback and press OK to start With the RED button you can dele
23. Y buttons and OK or the CH CH buttons Alternatively you can digit the channel number with the 0 9 buttons on the remote control Or press OK in viewing mode to display the channel list The volume can be adjusted with the VOL VOL buttons 6 0 OPERATION In viewing mode several features are available to make watching TV a true pleasure This paragraph describes these features Please also read chapter 7 0 to get familiar with the menu of your new receiver 6 1 Changing channels Your new receiver is equipped with four ways to change channels via direct access m via the CH CH buttons via the channel list via selection of channel groups APS Direct access To gain direct access to a certain channel simply input its number with the 0 9 buttons on the remote control Channel numbers can be up to four digits long Entering a number with less than four digits is possible Just wait a few seconds and your receiver will switch to the selected channel Using the CH CH buttons CH or and OK will switch to a higher channel Y and OK will switch a lower channel Channel list Press OK in viewing mode to display the Channel List Use Y in the Channel List to highlight your channel of choice and press OK once to select the highlighted channel Press OK again to leave the Channel List The Channel List is equipped with a filter function to make finding your favourite channels easier Within the Channel List press bu
24. Zahlungsverpflichtungen f r den Zeitraum bis zum Widerruf gleichwohl erf llen m ssen Verpflichtungen zur Erstattung von Zahlungen m ssen innerhalb von 30 Tagen erf llt werden Die Frist beginnt f r Sie mit der Absendung Ihrer Widerrufserkl rung f r uns mit deren Empfang Besondere Hinweise Ihr Widerrufsrecht erlischt vorzeitig wenn der Vertrag von beiden Seiten auf Ihren ausdr cklichen Wunsch vollst ndig erf llt ist bevor Sie Ihr Widerrufsrecht ausge bt haben Ihre HD PLUS GmbH Bitte beachten Nach dem Einstecken und durch die Wahl eines HD Senders aktivieren Sie die HD Karte f r 12 Monate Im Falle eines wirksamen Widerrufs sind Sie verpflichtet Wertersatz f r die bereits erbrachte Dienstleistung der Aktivierung zu leisten wenn HD PLUS hierdurch bereits vor Ende der Widerrufsfrist mit Ihrer ausdr cklichen Zustimmung aktiviert wurde Das Widerrufsrecht besteht nicht bei Fernabsatzvertr gen zur Lieferung von Software sofern die gelieferten Datentr ger vom Verbraucher entsiegelt worden sind 22 www strong tv
25. ack and other multimedia functions of the receiver would not work properly STRONG cannot guarantee the compatibility to all types of USB storage devices It is advised not to store important information on USB storage devices used with the receiver Always make backups of data on your USB storage device before you are going to use it with your receiver STRONG vwill not take responsibility for any loss of information or circumstances caused by loss of information Please ensure that either the USB device is already formatted to FAT or FAT32 system to use all media and record functions If your USB storage device is going to be used ONLY for record and playback we recommend formatting it to E2FS Linux file system for the best performance of recording and playback You can format the USB device via your receiver refer to chapter 7 4 1 USB INFO amp FORMAT for details Please be aware that formatting in Linux file system will have the consequence that Windows will not recognise this USB device anymore If you want to use your E2FS formatted USB storage device under Windows we recommend you to use tools available in the WWW for example the program Ext2 Installable File System 1 6 General Information HD PLUS m Version of the Test Suite was used in conformance testing m Services via the Satellite Infrastructure are available in Germany or such other territories as APS may define from time to time only m The usage of the HD card is designa
26. auch f r den Zeitraum des Nutzungsausschlusses und der Leistungsunterbrechung zur Zahlung der Verg tung verpflichtet 8 0 GEW HRLEISTUNG jm HD PLUS erbringt Leistungen unter Inanspruchnahme von Kommunikationsnetzen oder technischen Einrichtungen Dritter die sich au erhalb der Kontrolle von HD PLUS befinden Zeitweilige Beschr nkungen Beeintr chtigungen oder Ausf lle des HD Services 20 www strong tv PART 2 English STRONG DIGITAL TV aufgrund von Einfl ssen die HD PLUS nicht zu vertreten hat kann HD PLUS darum nicht ausschlie en HD PLUS bernimmt insbesondere keine Gew hr daf r dass bestimmte Programmangebote zu einem bestimmten Zeitpunkt empfangen werden k nnen dies gilt nicht soweit HD PLUS eine St rung zu vertreten hat 2 Der Nutzer erkennt an dass die Qualit t der entschl sselten bzw zug nglich gemachten Programmangebote einerseits von der durch Dritte bereitgestellten Signalqualit t und andererseits von der Leistungsf higkeit der vom Nutzer eingesetzten Wiedergabeger te abh ngig ist und beides au erhalb des Verantwortungsbereiches der HD PLUS liegt Der Nutzer erkennt ebenfalls an dass die Aufnahme und Wiedergabe aufgezeichneter Programmangebote durch Dritte eingeschr nkt werden kann 3 HD PLUS weist darauf hin dass Softwareprogramme nicht so entwickelt werden k nnen dass sie f r alle Anforderungen fehlerfrei laufen 4 HD PLUS behebt im Rahmen der bestehenden technischen und betr
27. cordings Your smart card must be valid to watch HD recordings otherwise it will fail Press the RED button to delete a selected recording from your USB device Press the GREEN button to rename the recording Press the YELLOW button to lock the recording with the PIN code Afterwards you will need to enter this PIN code to watch or delete the recording 7 4 3 Music amp Photo Player In the Music amp Photo Player menu you can navigate on your USB device to choose JPEG photos or MP3 music files Use A Y to select a file or a folder Press OK to mark a selected or JPEG and press P to start playback show this file Press the RED button to select all MP 3 and JPEG in the folder or route Use A V and press OK to select unselect single files Press the GREEN button to add selected or all files into the My Media list Press the YELLOW button to set Slide show or set MP3 repeat depending on what you want to watch or hear Press the BLUE button to start play back from My Media list During playback the following functions are available m starts playback of the next MP3 Jpeg m 4 starts playback of the previous MP3 Jpeg m Press pause the playback Press Il again to resume playback m Bl stops playback starts playback of the next Jpeg m 4 starts playback of the previous Jpeg m Press EXIT or to get back to the menu Note STRONG can not guarantee play back of every JPEG format size or MP3 sample ra
28. ctory reset will permanently delete all your personal settings timers and stored channels Please consider this before you perform a factory reset 7 2 3 Lock Setup Within the Lock Setup menu you can enable or disable the menu lock function and change the PIN code Before you can enter this menu you have to enter your PIN code DEFAULT PIN 0000 Use to highlight the setting you wish to change and lt P or 0 9 to change the value of the highlighted setting Install Lock Here you can change the PIN code setting for the access to installation menu Select ON if you like to protect entering Control panel menu with PIN code Select OFF to disable this function Parental Lock Select ON if you want to switch on the protection of channels with LOCK sign Select OFF to disable this function New PIN code Use this function to set your own personal PIN code Enter here your new PIN Confirm PIN code Enter here again the new PIN code to confirm A successful change of PIN is confirmed by an on screen message Use EXIT to go back to the previous menu 7 3 CAS SMART CARD In this Nagra CAS menu you can read the details form your HD smart card and can change the PIN code from this Smart card Find below Smart Card Information all details as Subscribed date and Smart Card serial number This information show you if card is still active and if you need to call the Call centre of HD to activated it again Press OK to open Change CA PIN menu
29. d you not to change time manually although you can enter another time Use 0 9 numeric buttons to enter your time Auto Standby This is a new power saving feature that helps you in reducing power consumption It will switch the receiver to standby mode when no command is given for the set time Possible settings are 1 2 3 6 12 24 hours and OFF Once all settings are made press EXIT to leave the menu A confirmation banner will be shown to save your settings www strong tv n STRONG PART 2 English DIGITALTV 7 2 1 3 Receiver Information This menu contains valuable information about the model number the software version and our web address www strong tv A customer support agent might ask for the information given in this screen Press EXIT to leave this menu 7 2 1 4 User Setup Within the User Setup menu you can configure the audio and video outputs of your receiver Use to highlight the setting you wish to change and lt P to change the value of the highlighted setting Press OK to display a list of all available options for the chosen setting Video Output Via Use this option to configure your connection to the TV set Select SCART if you are connect by Scart cable or select HDMI YUV if you are connect by HDMI or Component cable to TV set Be aware that HD services channels can only be seen if correct selection is made Resolution If you have selected HDMI YUV in above then you can select the r
30. description Note If you don t want to use this option you can press the BLUE button to start a normal auto scan on the selected satellite 4 5 First activation of your HD smart card Your receiver is already delivered with correct inserted smart card Although we recommend you to check that your smart card didn t get loose during the transport If you have ensured that the SC is inserted properly then you are ready for watching HD channels Your SC is already activated so you only need to switch to an HD service channel please see separate HD sheet for HD channels reference If you have already switched to one of the desired programs after 10 sec you will have access to the HD service Now you are ready to enjoy the HD channels 6 www strong tv PART 2 English STRONG DIGITAL TV 5 0 QUICK GUIDE TO USING YOUR RECEIVER We at STRONG understand that you can t wait to enjoy your new HD receiver The following quick guide will make you familiar with the basic operation ofthis device We do however advice you to read the full manual to get the best performance from your STRONG HD receiver To turn your receiver ON or to Standby use the STBY button on the remote control or the button on the left side ofthe front panel Ifyou are using the HDMI connection for your TV set it might be possible that you need to switch on TV and select the correct HDMI input first Choose the desired channel with the
31. die HD Karte au erhalb Deutschlands zu nutzen HD PLUS kann verlangen dass die HD Karte ausschlie lich in Verbindung mit einem ihr zugeordneten Digitalempf nger verwendet wird Au erdem ist HD PLUS berechtigt dies technisch sicherzustellen sog Pairing von Digitalempf nger und HD Karte Die Aktivierung der HD Karte obliegt dem Nutzer Die HD Karte darf nicht anders als vereinbart verwendet werden Der Nutzer ist nicht berechtigt die HD Software zu kopieren zu modifizieren zu disassemblieren zu dekompilieren oder andere Verfahren auf sie anzuwenden um deren Quellcode oder deren Struktur zu erfahren oder Prozesse oder deren Zustandsrepr sentation unberechtigt in Erfahrung zu bringen oder zu beeinflussen Gesetzliche Dekompilierungsrechte bleiben unber hrt Der Digitalempf nger das Wiedergabeger t z B TV und die Programmangebote sind ausdr cklich nicht Leistungsgegenstand Zertifizierte Digitalempf nger sind im Handel erh ltlich Ihre Installation obliegt dem Nutzer Im Falle technischer oder allgemeiner Probleme mit dem Digitalempf nger liegt die Verantwortung f r den Kundenservice beim Hersteller des Digitalempf ngers Die Anzahl und Zusammenstellung der Programmangebote kann sich w hrend der Vertragslaufzeit ndern HD PLUS beh lt sich vor die zur Nutzung des HD Services sowie zu dessen Erg nzung oder nderung erforderliche Software auf die HD Karte sowie den Digitalempf nger in unregelm igen Zeitabst nde
32. er parameters parameters correctly in menu Channel Setup Channel Scan Wrong direction of the dish Check the signal with an appropriate equipment and adjust your dish correctly No access to pay per Payment expired Check your access data in CAS menu view services Smart Card not correct inserted Check if your card is correct inserted Wrong smart card Check with you local dealer Tuned to pay TV service which is Check if card match to the service not supported by your used smart card The remote control The batteries of the remote Check whether the batteries are inserted does not work control are not inserted wrongly correctly or exhausted if so replace the inserted or exhausted batteries in the remote control The USB storage device Wrong formatted Format USB device by receiver in menu is not working properly Multimedia gt USB Info amp Format Check if USB 2 0 device is connected Device speed not sufficient The external USB Power consumption is too high Connect an extra power supply adapter to HDD does not start your USB HDD device The receiver switches Auto Power Down function In the menu Control Panel System to STBY automatically is activated and reached the Setup Time Setup you can adjust the adjusted time default 3h Auto Standby time 16 www strong tv PART 2 English STRONG DIGITAL TV A 2 SPECIFICATIONS Demodulator Demodulation QPSK 8PSK Input symbol rate DVB S QPSK 1
33. esolution of HDMI output Available options are 1080i 720p 576p and 576i Aspect Ratio If you have selected SCART in above then you can select the according aspect ratio of your TV set Available options are 4 3 and 16 9 Display 16 9 Event Use this option to set the preferred way of conversion from 16 9 broadcasts in 4 3 TV set You can choose between the following options Letter box the full 16 9 picture will be displayed on your 4 3 TV set with black bars above and below the picture Pan and scan The centre of the 16 9 picture will be displayed as full screen on your 4 3 TV set and Just Scale Combination of Letter box and Pan and scan SCART Mode Select RGB for the best picture quality or CVBS in case your TV doesn t support RGB In case you have set HDMI YUV in the above setting your Scart output will be switched to CVBS automatically Info banner Timeout Defines the time after which the OSD banners time out Possible settings are 2 12 seconds TV List Timeout Defines the time after which the TV list time out Possible settings are 2 12 seconds Dolby Digital Option Select ON if you using an optical connection to you digital amplifier to enjoy Dolby Digital in case the selected channel support this Select OFF if you not use this option Subtitle Control Use this option to set the preferred way of subtitles support Select Auto to switch subtitles automatic on if they are available or select Manual to select ON
34. hind a DiSEqC switch After you have set all necessary settings press OK to start the desired scan process After the selected scan finished successfully the receiver will ask you to Save or Cancel to save the search result select Save to discard select Cancel 7 1 2 Channel Editor Here you can Delete Set Favourites Lock Move and Sort your channels Press TV RAD button on your remote to select TV or Radio channel list Use lt P gt A V to highlight and OK to select channel s for the desired option explained below Press RED button to delete the selected channel s or channel group s Press GREEN to add or remove channels to from your favourite group Press YELLOW to lock channel s with a PIN code before you can watch or deleted it them Press BLUE to move channels within the selected channel list Press EXIT to exit this menu and select OK at the displayed message to store changes or choose Cancel to discard the changes 7 2 Control Panel The Control Panel allows you to change system settings as language and time set protections with PIN code and reset the receiver back to the factory settings It consists ofthe following sub menus System Setup Factory Default and Lock Setup Choose the desired sub menu with Y and press OK to advance 7 2 1 System Setup Use the Setup menu to configure the system settings of your receiver The following sub menus are available Language Setup Time Setup Receiver Information and User Setup
35. ieblichen M glichkeiten alle ihr gemeldeten St rungen des HD Services f r deren Behebung es nicht des Austauschs der HD Karte bedarf unverz glich Die Kosten f r die Inanspruchnahme des Kundendienstes von HD PLUS tr gt der Nutzer Vor bergehende Beeintr chtigungen des Empfanges durch atmosph rische St rungen oder Sender oder Satellitenausfall berechtigen den Nutzer nicht zur Minderung 9 0 HAFTUNG 1 HD PLUS haftet nur soweit HD PLUS ihren Erf llungsgehilfen und oder gesetzlichen Vertretern ein vors tzliches oder grob fahrl ssiges Verhalten zur Last f llt 2 Bei leicht fahrl ssig verursachten Sch den haftet HD PLUS nur wenn eine wesentliche Vertragspflicht verletzt wurde oder ein Fall des Verzugs oder der Unm glichkeit vorliegt In diesen F llen ist die Haftung auf den typischen vorhersehbaren Schaden begrenzt 3 Soweit es zu zeitweiligen Beeintr chtigungen beim Empfang der Programmangebote kommen sollte die au erhalb des Einflussbereichs von HD PLUS liegen insbesondere bei einem Ausfall des Satellitensignals den HD PLUS nicht zu vertreten hat haftet HD PLUS nicht 4 HD PLUS ist nicht verantwortlich f r die von ihr entschl sselten zug nglich gemachten Programmangebote und deren Inhalte 5 Eine gesetzlich vorgeschriebene verschuldensunabh ngige Haftung von HD PLUS insbesondere eine Haftung nach Produkthaftungsgesetz sowie eine gesetzliche Garantiehaftung bleibt von den vorstehenden Haftungseinschr nkungen u
36. lte nur dem gesetzlich zugelassenen Personenkreis zug nglich sind Der Nutzer darf den HD Service nicht missbr uchlich nutzen und ist verpflichtet seine HD Karte vor Verlust und Missbrauch zu sch tzen Der Nutzer darf insbesondere keine Eingriffe in die HD Software vornehmen oder vornehmen lassen um beispielsweise den unberechtigten Empfang von verschl sselten Programmangeboten zu erm glichen Auch die Benutzung von Vorrichtungen zur Umgehung der Verschl sselung ist verboten Solche Missbr uche k nnen zivil und strafrechtlich verfolgt werden Auf Ziffer 6 und Ziffer 7 3 wird verwiesen Wird die Bereitstellung des HD Services aufgrund von Eingriffen in die Software oder Hardware des Nutzers beeintr chtigt oder unterbrochen die HD PLUS nicht zu vertreten hat ist der Nutzer nicht zur R ckerstattung einer bereits entrichteten Servicepauschale berechtigt Dies gilt auch wenn die HD Karte besch digt wurde oder abhanden gekommen ist 6 0 FREISTELLUNG Der Nutzer haftet gegen ber HD PLUS f r die Einhaltung der in den Ziffern 4 und 5 aufgef hrten Pflichten Er stellt HD PLUS von s mtlichen Anspr chen Dritter frei die infolge einer schuldhaften Verletzung dieser Pflichten und oder sch digender Handlungen des Nutzers gegen HD PLUS geltend gemacht werden und leistet Ersatz f r dar ber hinausgehende Sch den einschlie lich der Kosten f r eine eventuell erforderliche Rechtsverfolgung und verteidigung 7 0 RECHTE UND PFLICHTEN VON
37. lug the power adapter amp cord to a suitable wall outlet 3 3 Connecting multiple fixed dishes using a DiSEqC 1 0 switch Fig 6 1 Connectthe LNB s of your fixed dishes to the inputs of a DiSEqC 1 0 switch 2 Connect the output or to receiver connector of the DiSEqC 1 0 switch to the SAT IN connector on your receiver 3 Refer to section 3 1 or 3 2 for TV and mains connections 5 www strong tv STRONG PART 2 English DIGITAL TV 4 0 STARTING UP FOR THE FIRST TIME Ensure that your satellite signal is of good quality and that all connections are sound In case of difficulties or questions please ask you local dealer for assistance It is recommended to follow the Setup Wizard step by step It will guide you through the basic installation and channel searching process You can enjoy digital HD broadcasts within just a few minutes 4 1 Language selection After turning on the power for the first time the language selection menu will appear Choose your language with lt P and confirm with OK In this welcome screen will the most important button description be displayed Once you are ready press OK to advance to the next step of the Installation wizard During any stage ofthe Setup Wizard you can press EXIT to get back to the previous screen 4 2 Location selection Here you can set the Time zone and switch the Summer time OFF or ON Use Y to move the highlight and lt P to change settings Press OK to confirm and
38. mer Tune CH or Record always including event channel information according to selected channel RED button allows you to Filter by Title Channel or Theme Here press GREEN to get back to EPG overview YELLOW button allows you to select by date Here press GREEN to get back to today s EPG overview Use the BLUE button to open the Weekly Overview for the selected channel press BLUE again to get back to EPG overview Note Availability of EPG data depends on the broadcaster and selected transponder frequency 8 www strong tv PART 2 English STRONG DIGITAL TV 6 7 Recording Your receiver allows you to make an instant recording of the program you are watching to an external USB HDD Simply press to start the recording Press INFO button during a recording to see channel and record time information stop the recording press button and select OK and confirm with OK button The maximum record time of each event is 2 hours Note Please connect an USB storage device with sufficient free space before you start a recording For recording HD broadcast a high speed device is highly recommended On the HD channels it can happen that some events are protected and a recording is not possible or limited in specific concerns 6 8 Time shift The Time shift function allows you to pause live broadcast up to 90 minutes and resume normal watching without missing anything Press II to freeze the current broadcast
39. n kostenfrei aufzuspielen oder dort vorhandene HD Software zu aktualisieren zu erg nzen oder zu ndern Unbeschadet der vorstehenden Regelungen ist die Haftung von HD PLUS bei Datenverlusten auf den typischen Wiederherstellungsaufwand beschr nkt HD PLUS beh lt sich vor HD Karten zu sperren bzw nicht mehr zu unterst tzen die aufgrund von Rechtsverletzungen auch durch Dritte die unerlaubte Nutzung des HD 18 www strong tv PART 2 English STRONG DIGITAL TV Services bzw eine Umgehung der Verschl sselung erm glichen Eine Verl ngerung des HD Services nach Ablauf der Freischaltung gem Ziffer 3 1 ist auf gesperrten bzw nicht mehr unterst tzten HD Karten nicht m glich 2 0 NUTZERKREIS UND NUTZUNGSVORAUSSETZUNGEN 1 Der HD Service steht nat rlichen Personen im Alter von mindestens 18 Jahren zur Verf gung und ist ausschlie lich f r die private nicht gewerbliche Nutzung bestimmt 2 Voraussetzung f r die Nutzung des HD Services ist eine digitaltaugliche Satellitenempfangsanlage welche auf einen von HD PLUS genutzten Satelliten ausgerichtet ist siehe www hd plus de faq sowie die Verwendung eines mit dem HD Logo gekennzeichneten Digitalempf ngers und ein Wiedergabeger t z B TV die im Leistungsumfang jedoch nicht enthalten sind vgl Ziffer 1 5 3 Eine uneingeschr nkte vollumf ngliche Nutzung des HD Services ist nur bei der Verwendung von HD zertifizierten Digitalempf ngern m glich Bei der
40. nber hrt Gleiches gilt f r die Haftung von HD PLUS bei schuldhafter Verletzung von Leben K rper oder Gesundheit eines Nutzers Die verschuldensunabh ngige Haftung gem 536a BGB ist ausgeschlossen wenn HD PLUS dem Nutzer eine HD Karte berl sst 6 Die Ziffern 9 1 9 2 und 9 5 umfassen s mtliche vertraglichen und gesetzlichen Anspr che die wegen der Nutzung des HD Services geltend gemacht werden k nnen 10 0 LAUFZEIT UND K NDIGUNG DES VERTRAGES UND NDERUNG DES HD SERVICES 1 Der Vertrag ber die Nutzung des HD Service l uft f r die jeweils vereinbarte Dauer ab Aktivierung der HD Karte und kann vom Nutzer unter der Voraussetzung dass seine Karte nicht gem Ziffer 1 7 gesperrt ist verl ngert werden Unber hrt hiervon bleiben etwaige au erordentliche K ndigungsrechte 2 Der Nutzer kann nicht au erordentlich k ndigen weil sich die Anzahl oder Zusammenstellung der Programmangebote welche der Nutzer mithilfe der HD Software entschl sseln kann w hrend der Vertragslaufzeit ndert 3 K ndigt HD PLUS den HD Service nach Abmahnung im Fall der Ziffer 7 3 kann HD PLUS Schadensersatz nach den gesetzlichen Vorschriften fordern www strong tv 21 STRONG PART 2 English DIGITAL TV 11 0 DATENSCHUTZ Einzelheiten zur Datenverarbeitung sind im Datenschutzmerkblatt enthalten siehe www hd plus de datenschutz 12 0 SCHLUSSBESTIMMUNGEN 1 HD PLUS ist berechtigt ihre Rechte und Pflichten aus die
41. play the calendar Use Y gt to pick the date for the recording and confirm it with OK Then press EXIT to apply the date to the Timer setting With Repeat set to Weekly Use lt P to select the day of the week at which you want the timer to start Time Press OK and use the or OK and V to choose the hour Use AW buttons to enter the minute lt P or OK and V to choose the minute Press EXIT to leave the setting Duration Use the 0 9 buttons to digit the duration of the timer if you have selected Record Once all settings are made Press RED Save button to store these settings and press EXIT to leave the Timer menu Delete a timer In order to delete a set timer select it with Y and press OK to select Press BLUE Delete button to delete and confirm with OK 8 0 OTA SOFTWARE UPGRADE OTA automatic The OTA Over the Air function automatically takes care that your receiver check if the latest software is loaded Every time your receiver is switched to standby the OTA function will check for an improved software version After detection of a newer version your receiver will display a message after you switched it ON again Then you can download the new SW version You can select OK to start the update immediately or you can select Cancel to start next time Be aware that download takes around 20 minutes You can skip the update process only for five times afterwards a forced download will be started www strong tv 15
42. sem Vertrag ganz oder teilweise auf einen zur ord nungsgem en Fortf hrung des Vertrages geeigneten Dritten zu bertragen Der Nutzer ist in diesem Fall berechtigt das Vertragsverh ltnis mit Wirksamkeit zum Zeitpunkt der bertragung zu k ndigen 2 Es gilt das Recht der Bundesrepublik Deutschland Die Anwendung von UN Kaufrecht ist ausgeschlossen Stand August 2010 WIDERRUFSBELEHRUNG Widerrufsrecht Sie k nnen Ihre Vertragserkl rung innerhalb von zwei Wochen ohne Angabe von Gr nden in Textform z B Brief Fax E Mail widerrufen Die Frist beginnt nach Erhalt dieser Belehrung in Textform jedoch nicht vor Vertragsschluss und auch nicht vor Erf llung unserer Informationspflichten gem Artikel 246 2 in Verbindung mit 1 Abs 1 und 2 EGBGB Zur Wahrung der Widerrufsfrist gen gt die rechtzeitige Absendung des Widerrufs Der Widerruf ist zu richten an HD PLUS GmbH Beta Str 1 10 85774 Unterf hring Amtsgericht M nchen HRB 159479 Gesch ftsf hrer Wilfried Urner Vors Georges Agnes Martin Oberfrank Timo Schneckenburger Widerrufsfolgen Im Falle eines wirksamen Widerrufs sind die beiderseits empfangenen Leistungen zur ckzugew hren und ggf gezogene Nutzungen z B Zinsen herauszugeben K nnen Sie uns die empfangene Leistung ganz oder teilweise nicht oder nur in verschlechtertem Zustand zur ckgew hren m ssen Sie uns insoweit ggf Wertersatz leisten Dies kann dazu f hren dass Sie die vertraglichen
43. talempf ngers gesteckt und ein HD Programm damit erstmals entschl sselt wird 3 Rechtzeitig vor Ablauf der jeweiligen Freischaltung des HD Services wird der Nutzer durch eine Einblendung auf dem Wiedergabeger t auf Ablauf und eventuell m gliche Verl ngerungs bzw Neukaufoptionen f r die Nutzung des HD Services aufmerksam gemacht Die Freischaltung einer HD Karte sollte erst nach Einblendung auf dem Wiedergabeger t verl ngert werden Andernfalls kann sich der Zeitraum einer bestehende Freischaltung verk rzen Der Erwerb einer HD Karte beinhaltet jedoch nicht den Anspruch auf Verl ngerung derselben 4 Die Programmangebote und Services Dritter und deren Empfang bzw Nutzung k nnen gesonderte Kosten ausl sen f r die der Nutzer selbst verantwortlich ist 4 0 BEACHTUNG VON URHEBERRECHTEN Die HD Software und die HD Karte sind rechtlich gesch tzt Soweit Programme von Lizenzgebern zur Anwendung kommen ist deren Eigentum in gleichem Umfang gesch tzt Die unerlaubte Vervielf ltigung oder Verbreitung der HD Software oder der HD Karte und oder deren Nachahmung wird HD PLUS durch zivil gegebenenfalls auch strafrechtliche Ma nahmen verfolgen www strong tv 19 STRONG PART 2 English DIGITALTV 5 0 RECHTE UND PFLICHTEN DES NUTZERS Jeder Nutzer des HD Services tr gt selbst die Verantwortung f r die bestimmungsgem e Nutzung der Nutzer hat insbesondere sicherzustellen dass jugendgef hrdende Sendeinha
44. te 14 www strong tv PART 2 English STRONG DIGITAL TV 7 5 Program Guide The Program Guide menu allows you access EPG Electronic Programme Guide and to set Timers for wakeup and or recording Choose the desired sub menu with Y and press OK to advance 7 5 1 EPG The Electronic Programme Guide is a very useful function that allows you to watch programme schedules and information on screen and to mark programs for recording Find all detailed descriptions in chapter 6 6 EPG Note Availability of EPG data depends on the broadcaster 7 5 2 Timers Timers can be used to schedule recordings or to switch to a certain channel at a desired moment It will help you not to miss your favourite events You can set up to 30 Timers Use Y to select one of the available timers Press OK to advance The Edit Timer screen will now be displayed Use Y to switch between settings and lt P or 0 9 to adjust the value of a setting Type Choose between View Record or None Channel Press OK to display the channel list and use Y to select the wished channel for this action Press TV RAD button to switch between TV channel and Radio channel list Confirm highlighted channel with OK button Title Press OK if you want to give the Timer another name as Manual Timer xx Use the displayed keypad for insertion Repeat Choose between Once Daily Weekly Weekdays or Weekend Date With repeat set to Once press OK to dis
45. te files if you want to make some free space on your USB device The recording will be stored with the current event name You can rename the recording by pressing the GREEN button With the YELLOW button you can protect a recording with the PIN Code before it can be played back or deleted 7 0 MENU All important settings and features of your receiver can be operated from the Menu It consists of the following sub menus Channel Setup Control Panel CAS Multimedia and Program Guide Press MENU in viewing mode to display the Menu Use lt P to select a sub menu and V to choose an option Press OK to advance to the chosen submenu Press EXIT to go one step back or press MENU to go to viewing mode www strong tv 9 STRONG PART 2 English DIGITALTV 7 1 Channel Setup The installation menu allows you to change satellite settings and to search for channels It consists of the following sub menus Channel Scan and Channel Editor Choose the desired sub menu with and press OK to advance 7 1 1 Channel Scan Use this menu to select the satellite change the settings for the used antenna and start scan process for searching the channels Satellite Use Y to highlight Satellite and lt P to select the satellite you wish to change the settings for To display the list of all available satellites press OK At the end of this list you can find Newsatl 10 Those can be used to configure a new satellite setup LNB Select
46. ted for the Federal Republic of Germany only DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories www strong tv 3 STRONG PART 2 English DIGITALTV 2 0 YOUR RECEIVER 2 1 DEFAULT PIN CODE 0000 2 2 Front Panel asa 2 3 Fig 1 Standby ON switch Turns the receiver ON or to Standby Navigations buttons Menu navigation 4 digit LED display Displays channel number or time MENU Opens the OSD menu EXIT Exit from menu OK Confirm selection Card reader Slot to insert HD card for access of HD channels Fig 2 SATIN COMPONENT VIDEO RCA AUDIO L R TV SCART HDMI S PDIF Opt USB DC POWER 2 4 Remote Control Unit a a UE NS c w gt 0 X 0 9 FAV OPT TXT F LIST MEDIA RECALL GUIDE VOLAV INFO RED To connect to the LNB of your satellite dish for reception of satellite broadcast signal To connect to TV or Beemer for high video quality over Y Pb Pr component output To connect to the RCA video input of your TV or VCR using an RCA cable To connect to the audio input of TV VCR or your HIFI using an RCA cable To connect to TV using a SCART cable To connect to the HDMI input of your TV using a good quality HDMI cable To connect to a digital or home cinema audio amplifier using an optical cable Connect your USB storage device stick HDD
47. tton to jump to selections on left side of channel list banner Here you can select following options ALL FAV A Z SAT and APS Use Y to select one of these options and press button to select the list of your choice and OK to confirm You can use the TV R button within the channel list to toggle between TV and radio channel list s APS Channel list Your receiver is equipped with new system called APS Astra Platform Service which store channels in separated channel lists on sort type or group If you are using the Astra 19 2 satellite and did scan on HD channel scan in installation then this system is contained in the channel list Press OK in viewing mode to display the Channel List Press button to select the group of your choice on the left side of the channel list banner Select APS with the Y buttons and press the gt button to show the group lists from APS channel system Select your wanted channel group by Y buttons Directly on the right side is displayed which channels belong to this selected group Press button to enter this channel group and select it with the Y buttons Press OK once to select the highlighted channel by another pressing you can switch to viewing mode The receiver will stay in the selected channel group until you will select another one www strong tv 7 STRONG PART 2 English DIGITALTV 6 2 Info Banner At any time during viewing mode you can press the INFO button to
Download Pdf Manuals
Related Search