Kingwin KF-1000-BK storage enclosure
Contents
1. KF 1000 BK K 3 9 Internal Tray less Hot Swan Rack ae www kingwin com Quick Installation Guide CE Fe mscontan Content Description This package is completed with these items KF 1000 BK 1 SATA 15P power cable 1 SATA 7P data cable 1 Manual 1 Key 2 Screw 4 KF 1000 BK 1 cc SATA 15P power cable 1 ee Power amp HDD LED SATA 7P data cable 1 Manual 1 Miniature key 2 R Mounting screw 4 Parts Front panel 1 Key lock 2 LED indicator for Power amp Access 3 Spring lock Key lock A Lock B Unlock ET F J Rear panel paint 1 SATA power connector 15P 2 SATA data connector 7P 3 Power amp HDD LED are connected through a small 4P connector Installation 1 Remove the cover of an empty drive bay 2 Smoothly insert KF1000 BK into the bay and push it inward until the KF1000 BK screw hole is aligned with the hole of the bay 3 Secure KF 1000 BK with screws use two screws on each side to securely hold the device 4 While installing the direction must be right The lock at left the pivot of the door at right Connection Basic Usage 1 Connect one end of the SATA 15P power cable 15P 1 to the rear side of KF 1000 BK another end big 4P power to the power port in the PC case 2 Connect the small 4P port of the SATA power cable 15P to the PCB s joint on the back of KF 1000 BK 3 Connect one end of th2. e SATA 7P data cable to the back of KF 1000 BK and connect the other end to the main board or the SATA RAID card 1 Pull the spring lock to open the front door 2 Insert the HDD into KF 1000 BK with it s printed label side up and make sure the HDD connector is inserted into KF 1000 BK Power 15P Big 4P inaa ia 3 Press the door to push the hard drive into KF 1000 BK until the door is locked The door will not be closed firmly if HDD is inserted in wrong direction The HDD ROM will get damaged if the door is closed with force Unloading Hard Drive 1 Unlock key lock smoothly then pull the spring lock to open the door 2 Carefully take the hard drive out from KF 1000 BK A HDD may reach atemp of 50 C it will not burn hands but still need to be careful Hold the HDD by its edge please do not touch its PCB a 1 If your main board does not support SATA II A SATA 3 0 please adjust change the pin tap from COM to be BECO which is under SATA mode SATA 1 5Gb s 2 Please operate the HDD carefully while ejecting it out from KF 1000 BK or the protruding FPC Connector on its PCB will be unexpectedly damaged a Z
Download Pdf Manuals
Related Search