Gastroback 98101
Contents
1. 4 Take the ring nut and screw it onto the thread of the housing turning it clockwise You can use the spanner fo y securely tighten the ring nut picture C NOTE Do not tighten the ring nut too much to avoid overwinding the thread The Cookie Attachment is now assembled and can be attached to the Design Standmixer Advanced 5 Prop up the attachment access picture D 6 Press down the attachment ejector picture E and slide the Cookie Attachment into the opening Release the attachment ejector and turn the Cookie Attachment slightly so that the shaft engages in the socket with pin of the access opening located in the hole of the attachment 7 Place the tray on top of the feed chute in a convenient position picture F 8 Slide the multi shaped blade into the slot of the cookie attachment holder making sure that the handle is situated away from the attachment picture G If the handle is facing the other side you are not able to select the cookie shape that is the closest to the handle Select the desired cookie shape by moving the handle until the shape required fits over the opening of the cookie attachment holder Place a plate beneath the outlet to collect the shaped dough The Cookie Attachment is now ready for use To operate the Cookie Attachment WARNING Use the cookie attachment for cookie dough only For the case that liquid runs over the appliance while operating turn the appliance Off imm2. GZASTROBACK _ Instructions for use Meat Grinder Cookie Attachment Accessory Design Stand Mixer Advanced Read all provided instructions before first usage Art Nr 98101 Model and attachments are subject to change Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions Important Instructions e The appliance is designed for normal household quantities Do not operate or store the appliance outdoors or in damp or wet areas e Before use always make sure that the appliance and accessory is properly and completely assembled Always IMMEDIATELY unplug the appliance after each operation and before assembling or disassembling accessories Always ensure that the accessories are engaged firmly before connecting the appliance to the mains power supply see Operation Always handle the entire appliance and the tools with care and without violence e Do not grab into the assembled attachment with your hands or any other objects when the appliance is connected to the poweroutlet e CAUTION Do not block the ventilation slits on the back of the appliance and do not use the appliance in continuous operation for more than 10 minutes to avoid overheating If processing large quantities of food regularly interrupt operation and unplug the appliance for a few minutes to let the motor cool down e ATTENTION Avoid contact the moving parts
3. Rinse all parts with running water and dry them accurately 4 Grease the screen scroll and scrape with salad oil to prevent air corrosion 5 Wipe the appliance and power cord with a damp soft cloth Take care not to spill or drip water or any other liquids on the appliance 6 Thoroughly dry the appliance and all parts of the appliance and attachment after each cleaning Leave all parts dry naturally where they are out of reach of young children Clear a blocking If the outlet is blocked no mince comes out of the outlet while operating ATTENTION If a blocking occurs turn Off the appliance immediately Clear the problem before turning on the motor again l Turn the appliance Off and then take the food pusher out of the feed chute 2 Turn the motor On speed control 1 4 and Off by turns to loosen the blocking ATTENTION If the motor still does not start running turn the appliance Off pull the plug and clean the appliance Trouble shooting guide Possible problem Easy solution The mince is not fine enough Use a smaller mince plate and or mince the ingredients more then once There are still ingredients in the feed chute The attachment is blocked Turn the appliance Off immediately and but nothing is coming out of the outlet operate according to the instructions Clear a blocking The motor stops running while operating Turn the appliance Off immediately and operate according to th
4. Attachment Operating Before first use of the Cookie Attachment Remove all promotional materials and packing as well as any foreign objects but do not remove the model label Before first use and after a long period of storage clean the processing tools in warm soapy water see Care and Cleaning Using the Cookie Attachment WARNING Always switch Off the appliance wait until the motor stops completely and unplug the appliance before assembling disassembling the attachment To turn the appliance Off you have to turn the speed control anticlockwise into the Off position Assemble the Cookie Attachment I Take the housing into your left hand The part with the thread has to face the front and the feed chute upwards 2 Take the scroll into your right hand and place it into the housing The axis has to face the housing when sliding the scroll into the housing picture A NOTE The scroll is correctly located when the scroll is pushed up all the way inside the housing and the end of the axis pokes out of the back end of the housing 3 Fit the cookie attachment holder over the end of the drive shaft ensuring that it is correctly located picture B NOTE Ensure the cookie attachment holder sits correctly over the squared end of the scroll with the rim flush the housing before tightening the ring nut You should be able to slide the multi shaped blade into the slots of the holder horizon tally to ease the handle
5. Keep hands hair clothing as well as spatula and other utensils away from accessory during operation to prevent injury and or damage to the mixer or the attachment e DO NOT immerse the motor housing or power cord in any liquids or spill any liquids on it e Never leave the appliance unattended when in operational mode Do not leave the appliance unattended while connected to the power supply Always switch Off the appliance and IMMEDIATELY unplug the appliance after operation and if it is not in use cleaning and or assembling or disassembling the processing tools Always grasp the plug to disconnect the appliance from the power outlet The Meat Grinder Attachment SCANAARKRWN gt spanner for the ring nut ring nut fine screen coarse screen scrape scroll housing tray food pusher 10 2 litre storage container can be used as dust protection while storing the attachment or as meat tray when processing meat 11 cookie attachment holder 12 multishaped cookie blade Meat Grinder Attachment Operating Before first use of the Meat Grinder Attachment Remove all promotional materials and packing as well as any foreign objects but do not remove the model label Before first use and after a long period of storage clean the processing tools in warm soapy water see Care and Cleaning Using the Meat Grinder Attachment WARNING Always switch Off the appliance wait until the motor stops completely and unplu
6. and pull the Cookie Attachment out off the access opening 4 Take off the ring nut by turning it anticlockwise You can use the provided spanner to loosen the ring nut picture B housing Slide the multi shaped blade out of the cookie attachment holder Care and Cleaning Clean the appliance directly after use and do not leave any food dry on the surfaces of the appliance WARNING To avoid injuries to persons and damage always switch Off the appliance wait for the motor fo stop completely and unplug the appliance immediately after operation and before disassembling or cleaning the appliance With the appliance connected to the power supply keep hands hair clothing as well as spatula and other utensils away from feed chute to prevent injury and or damage to the appliance DO NOT place the appliance accessories or power cord in an automatic dishwasher Do not immerse the motor housing or power cord in any liquids or spill any liquids on it Always wipe off spilled liquids immediately CAUTION Do not use abrasive cleaners cleaning pads corrosive chemicals disinfectants bleach or any sharp or hard objects i e metal scouring pads for cleaning for this could damage the surfaces Carefully clean the appliance with a damped sponge or cloth and warm soapy water 1 Switch OFF speed control into Off position wait for the motor to stop completely and unplug the appliance from the power outlet 2 Disassem
7. beside the appliance to dry off overrunning liquids 1 Cut the meat into pieces of 2 5 cm square size and remove hard parts like bones shells or stems 2 Assemble the Meat Grinder Attachment as described attach it to the Design Standmixer Advanced and place a plate or dish for example the provided storage container in front of the outlet WARNING Always make sure that the appliance is turned Off before plugging in the power supply 3 Plug the power supply cable into a mains socket WARNING Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute Never push the food into the feed chute with your fingers or put foreign substances hair towels cutlery into the feed chute Always use the food pusher for this purpose ATTENTION Avoid contact the moving parts Keep hands hair clothing as well as spatula and other utensils away from feed chute during operation to prevent injury and or damage to the appliance 4 Switch on the appliance using speed setting 4 IMPORTANT Speed setting 4 is the highest speed setting you are allowed to choose when using the Meat Grinder Attachment 5 Slowly feed the meat pieces a piece at a time through the feed chute and push down with the food pusher Do not apply excessive force when pushing down the food pusher Use only the food pusher to press down the meat Never use the
8. eggs 150g sugar 300g flour lemon essence optional Cream butter and sugar together using the beater until the mixture is light and fluffy Beat in eggs then fold in the sifted flour and lemon essence Pass the mixture through the attachment having selected the desired shape and cut into length Place onto greased sheet and bake in the centre of hot oven 200 degree for approx 10 minutes or until cooked Chocolate Cookies 200g sugar 1258 soft butter 2 small eggs 25g cacao powder 250g flour Cream butter and sugar together using the beater until the mixture is light and fluffy Beat in eggs then fold in the sifted flour and cacao powder Pass the mixture through the attachment having selected the desired shape and cut into length Place onto greased sheet and bake in the centre of hot oven 200 degree for approx 10 minutes or until cooked Accessories for the Design Stand Mixer Advanced You will get the accessories from your specialty retailer Pasta Maker Attachment Art Nr 98100 Meat Grinder Cookie Attachment Art Nr 98101 Food Slicer Shredder Attachment Art Nr 98102 Additional stainless steel bowl Art Nr 98103 GASTROBACK GmbH Gewerbestra e 20 e D 21279 Hollenstedt Germany htto www gastroback de e E Mail info gastroback de
9. fingers IMPORTANT Operate in a slow and constant pace Do not try to rush the procedure by pushing down the meat with force This way the scroll might gets blocked and stops operating If no meat is coming out the outlet even though there is still meat in the feed chute turn the appliance Off and work according to the instructions Trouble shooting guide 6 Switch OFF the appliance after use and disconnect the power supply cable from the mains socket 7 As soon as the last bit is minced turn the appliance OFF and pull the plug 8 Clean and disassemble the appliance right after use and make sure that no leftover food desiccate on the appliance Work according to the instructions Care and cleaning Dissemble the Meat Grinder Attachment l Switch Off the appliance after use and disconnect the power supply cable from the mains socket 2 Take the tray out of the feed chute 3 Press down the attachment ejector picture A and pull the Meat Grinder Attachment out off the access opening 4 Take off the ring nut by turning it anticlockwise You can use the provided spanner to loosen the ring nut 5 Take the screen scrape and the scroll out of the housing picture B Care and Cleaning Clean the appliance directly after use and do not leave any food dry on the surfaces of the appliance WARNING To avoid injuries to persons and damage always switch Off the appliance wait for the motor fo
10. not try to rush the procedure by pushing down the dough with force This way the scroll might gets blocked and stops operating If no dough is coming out the outlet even though there is still dough in the feed chute turn the appliance Off and work according to the instructions Trouble shooting guide 6 Cut the extruded cookie mixture into suitable length shape it if required and place onto a greased baking tray Cook in the middle of a hot oven 200 degree for approx 10 minutes or until cooked NOTE To assist with the removal of some of the dough left inside the attachment a small amount of bread can be fed through the attachment The appliance should be stopped as soon as the bread becomes visible through the multi shaped blade ATTENTION Do not try to force the bread through the multi shaped blade as this might damages the attachment 7 Switch Off the appliance after use and disconnect the power supply cable from the mains socket 8 As soon as the last bit is minced turn the appliance Off and pull the plug 9 Clean and disassemble the appliance right after use and make sure that no leftover food desiccate on the appliance Work according to the instructions Care and cleaning Dissemble the Meat Grinder Attachment l Switch Off the appliance after use and disconnect the power supply cable from the mains socket 2 Take the tray out of the feed chute 3 Press down the attachment ejector picture A
11. stop completely and unplug the appliance immediately after operation and before disassembling or cleaning the appliance With the appliance connected to the power supply keep hands hair clothing as well as spatula and other utensils away from feed chute to prevent injury and or damage to the appliance DO NOT place the appliance accessories or power cord in an automatic dishwasher Do not immerse the motor housing or power cord in any liquids or spill any liquids on it Always wipe off spilled liquids immediately CAUTION Do not use abrasive cleaners cleaning pads corrosive chemicals disinfectants bleach or any sharp or hard objects i e metal scouring pads for cleaning for this could damage the surfaces Carefully clean the appliance with a damped sponge or cloth and warm soapy water 1 Switch OFF speed control into OfF position wait for the motor to stop completely and unplug the appliance from the power outlet 2 Disassemble the attachment regarding the instructions Disassemble the Meat Grinder Attachment and remove meat residues on the scroll and the feed chute Use a wooden spoon for emptying the tray Follow the cleaning instructions step by step 3 Wash all parts thoroughly in hot soapy water Do not use aggressive detergents The parts are not suitable for dishwasher Soak parts with desiccated food leftovers a few minutes in warm soapy water and use a nylon cleaning brush or cleaning sponge for cleaning
12. Notes for disposal Dispose of the appliance must be effected in accordance with the corresponding local regulations and requirements for electrical appliances Please contact your local disposal company Warranty We guarantee that all our products are free of defects at the time of purchase Any demonstrable manufacturing or material defects will be to the exclusion of any further claim and within 2 years after purchasing the appliance free of charge repaired or substituted There is no Warranty claim of the purchaser if the damage or defect of the appliance is caused by inappropriate treatment over loading or installation mistakes The Warranty claim expires if there is any technical interference of a third party without an written agreement The purchaser has to present the sales slip in assertion of claims and has to bear all charges of costs and risk of the transport Recipes Almond Cookies 125g soft butter 150g sugar 250g flour I small egg 409 ground almonds 1 2 teaspoon baking powder lemon essence optional Cream butter and sugar together using the beater until the mixture is light and fluffy Beat in egg then fold in the sifted flour baking powder nuts and lemon essence Pass the mixture through the attachment having selected the desired shape and cut into length Place onto greased sheet and bake in the centre of hot oven 200 degree for approx 10 minutes or until cooked Plain Cookies 150g soft butter 2 small
13. ble the attachment regarding the instructions Disassemble the Cookie Attachment and remove dough residues on the scroll and the feed chute Use a wooden spoon for emptying the tray Follow the cleaning instructions step by step 3 Wash all parts thoroughly in hot soapy water Do not use aggressive detergents The parts are not suitable for dishwasher Soak parts with desiccated food leftovers a few minutes in warm soapy water and use a nylon cleaning brush or cleaning sponge for cleaning Rinse all parts with running water and dry them accurately 4 Grease the scroll cookie attachment and multishaped blade with salad oil to prevent air corrosion 5 Wipe the appliance and power cord with a damp soft cloth Take care not to spill or drip water or any other liquids on the appliance 6 Thoroughly dry the appliance and all parts of the appliance and attachment after each cleaning Leave all parts dry naturally where they are out of reach of young children Storage Always clean the appliance and attachment before storing see Care and Cleaning Ensure to store the appliance and attachment where it is clean dry and safe from frost direct sunlight and inadmissible strain mechanical or electric shock heat moisture and where it is out of reach of young children Place the appliance and attachment on a clean and stable surface where it can not fall Do not place any hard or heavy objects on the appliance or the attachment
14. e instructions Clear a blocking After cleaning the motor does not get started e Is the power cord plugged in again when turning the appliance On e The motor might be blocked with some hard substance for example a bone Turn the appliance Off immediately and pull the plug e Disassemble and clean the appliance Operate according to the instructions Care and cleaning e If the problem is not solved after the cleaning take the appliance for technical maintenance and repair to an authorised specialised reparation shop The attachment blocks up permanently e Jo ensure that the attachment does not seize never operate it while operating under excessive pressure Operate in a slow and constant pace Do not try to rush the procedure by pushing down the food with force o For mincing hard ingredients really fine start with the coarse screen Mincing the second time use the fine screen The attachment moves or loosened while The attachment is not correctly assembled or not securely locked to operating the attachment access Turn the appliance Off immediately Operate according to the instructions Assemble the Meat Grinder Attachment The food leaks out at the side of the The ring nut is not screwed on fight enough Turn the appliance ring nut Off immediately and then pull the plug Tighten the ring nut but do not overwind the thread If the problem still occurs disassemble and clean the appliance Cookie
15. ediately and pull the plug Clean and dry the appliance according to the instructions Care and cleaning l Prepare cookie dough you find recipes in the back of the instruction manual 2 Assemble the Cookie Attachment as described attach it to the Design Standmixer Advanced and place a plate or dish in front of the outlet WARNING Always make sure that the appliance is turned Off before plugging in the power supply 3 Plug the power supply cable into a mains socket WARNING Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute Never push the food into the feed chute with your fingers or put foreign substances hair towels cutlery into the feed chute Always use the food pusher for this purpose ATTENTION Avoid contact the moving parts Keep hands hair clothing as well as spatula and other utensils away from feed chute during operation to prevent injury and or damage to the appliance 4 Switch On the appliance using a slow speed setting 1 4 to start with NOTE Any speed can be used depending upon the skills of the operator 5 Feed cookie mixture through the attachment a little at a time and push down with the food pusher Do not apply excessive force when pushing down the food pusher Use only the food pusher to press down the meat Never use the fingers IMPORTANT Operate in a slow and constant pace Do
16. g the appliance before assembling disassembling the attachment To turn the appliance Off you have to turn the speed control anticlockwise into the Off position Assemble the Meat Grinder Attachment I Take the housing into your left hand The part with the thread has to face the front and the feed chute has to face upwards 2 Take the scroll into your right hand and place it into the housing The axis has to face the housing when sliding the scroll into the housing picture A NOTE The scroll is correctly located when the scroll is pushed up all the way inside the housing and the end of the axis pokes out of the back end of the housing 3 Fit the scrape over the square end of the drive shaft ensuring that it is correctly located The rounded side of the knife must face the scroll the smooth side is in contact with the screen picture B NOTE Meat will not be minced if the knife is mounted the wrong way round IMPORTANT Failure to correctly position the scrape over the end of the drive shaft may cause permanent damage to your attachment 4 Select the desired screen and place against the scrape IMPORTANT Make sure that the notch in the screen fits over the protrusion of the housing picture B C The scrape does not flush 100 with the rim of the housing when correctly located notch 5 Take the ring nut and screw it onto the thread of the housing turning it clockwise You can use the spanner to securely
17. tighten _ 2 the ring nut picture D E NOTE Do not tighten the ring nut too much fo avoid overwinding the thread The Meat Grinder Attachment is now assembled and can be attached to the Design Standmixer Advanced 6 Prop up the attachment access picture F 7 Press down the attachment ejector picture G and slide the Meat Grinder Attachment into the opening Release the attachment ejector and turn the Meat Grinder Attachment slightly so that the j 7 y shaft engages in the socket with pin of the access opening located in the hole of the attachment 8 Place the tray cover on top of the feed chute in a convenient position picture H You can place the storage container beneath the outlet to collect the food The Meat Grinder Attachment is now ready for use To operate the Meat Grinder Attachment WARNING For the case that liquid runs over the appliance while operating turn the appliance OFF immediately and pull the plug Clean and dry the appliance according to the instructions Care and cleaning TIP If you use special mince recipes you can mix the ingredients for example steamed onions or spices with the meat before mincing This way the ingredients get mixed really well IMPORTANT The appliance can not mince hard or stingily ingredients for example bones nuts ginger If you use hard ingredients like onions or carrots you have to steam them before adding them to the meet Place a dry towel
Download Pdf Manuals
Related Search