ENCORE ENH916P network switch
Contents
1. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if it is not installed and used in accordance with the instruction manual it may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the User will be required to correct the interference at his own expense Shielded interface cables must be used in order to comply with emission limits Changes or modifications to the equipment which are not approved by the party responsible for compliance could affect the user s authority to operate the equipment Copyright _ 1999 All Rights Reserved Company has an on going policy of upgrading its products and it may be possible that information in this document is not up to date Please check with your local distributors for the latest information No part af this document can be copied or reproduced in any form without written consent from the company Trademarks All trade names and trademarks are the properties of their respective companies General Description The device is a powerful high performance Fast Ethernet swi2. from the LED indicators on the front panel shown below F LED Color Status Indication POWER PWR GREEN ON The switch is power on OFF The switch is power off LINK ACT GREEN ON A link is established BLINKING A link is established and data is being transmitted or received EWI T ld mf ENCORE ENH916P NWY 16 Port 10 100Mbps Ethernet Switch Quick Installation Guide
3. nnecting to another unit without using crossover cable When using the uplink port you can extend the distance to 100m for linking another switch or hub To prolong the operational life of your units Never stack units more than eight high if freestanding Do not place objects on top of any unit or stack Do not obstruct any vents at the sides of the case Use only the AC power adapter that came with the switch to prevent damage to the unit 03 PN 2042070000011 Product Features Complies with 10BASE T specifications of the IEEE802 3 standard Complies with 100BASE TX specifications of the IEEE802 3u standard RJ 45 ports for 100Base TX and 10Base T connectivity Supports Nway protocol for speed 10 100Mbps and duplex made HalfFull auto detection Supports full and half duplex operation on all ports Supports back pressure half duplex and flow control IEEE802 3x Wire speed packet filtering and forwarding rate Store and forward architecture filters fragment amp CRC error packets Supports extensive LED indicators for network diagnostics External power adapter Supports MDI MDI X auto crossover Package contents 16 port 10 100Mbps Ethernet Switch AC power adapter Quick installation guide If any of the items is damaged or missing please contact your retailer immediately Front panel LED indicators After installing the switch you can check its status
4. tch with all 16 ports capable of 10 or 100Mbps auto negotiation operation Nway which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode It is ideal for micro segmenting large networks into smaller connected subnets for improved performance enabling the bandwidth demanding multimedia and imaging applications Moreover the 10 100Mbps auto sensing ability provides an easy way to migrate 10Mbps to 100Mbps network with no pain Compared to the shared 10Mbps or 100Mbps networks the Ethernet Switch delivers a dedicated 10 100Mbps connection to every attached client with no bandwidth congestion issue FAIS ERRI 80 140Mm 100 REA E f Rear panel ports SRE ALERT ERA IIS Ports 1x 16x The switch has sixteen 10 100Mbps RJ 45 ports where you can connect computers or network devices to the switch AC IN This port connects the AC power adapter Power Connecting Plug the circle end of the power adapter firmly into the power port on the switch rear panel and the other end into an electric service outlet then the system is ready Connecting computers to the switch The switch features auto MDV MDIX crossover detection function and provides plug and play capability Users can immediately use any of the features of this product simply by plugging the network cables RJ 45 into the computers and the switch All Ports can be used as an uplink port for co
Download Pdf Manuals
Related Search