Ryobi RHT500R
Contents
1. RYOBI RHT500R RHT600RL ELECTRIC HEDGE TRIMMER OPERATOR S MANUAL Original Instructions RHT500R RHT600RL N197 Important It is essential that you read the instructions in this manual before operating this machine 5 10 x LS T ES AS RHT500R RHT600RL A A A a zu OE RHT500R RHT600RL ENGLISH Your hedge trimmer has been engineered and manufactured to Ryobi s high standard for dependability ease of operation and operator safety When properly cared for it will give you years of rugged trouble free performance Thank you for buying a Ryobi product WARNING To reduce the risk of injury the user must read and understand the operator s manual before using this product GENERAL POWER TOOL SAFETY RULES WARNING Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operate2. residual current device RCD protected supply Use of an RCD reduces the risk of electric shock PERSONAL SAFETY Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Use personal protective equipment Always wear eye protection Protective equipment such as dust mask non skid safety shoes hard hat or hearing protection used for appropriate conditions will reduce personal injuries Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking up or carrying the tool Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents Remove any adjusting key or wrench before turning the power tool on A wrench or a key left attached to a rotating part of the power tool may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts If devices are provided for the connection of dust extrac
3. they could get pinched or cut NEVER touch blades or service unit with the power supply connected A BLADE MAINTENANCE Always clean the cutting blades after operation and lubricate as described later in this manual Perform regular visual checks inspection on the cutting edges of the blade and check the tightness of the blade bolts LUBRICATING THE BLADE For easier operation and longer blade life lubricate the hedge trimmer blade before and after each use Stop the motor and disconnect from power supply Lay the hedge trimmer on a flat surface Apply light weight machine oil along the edge of the top blade If you will be using the hedge trimmer for an extended period it is advisable to oil the blade during use See Figure 7 CLEANING THE HEDGE TRIMMER Stop the motor and disconnect from power supply Clean dirt and debris from the body of the hedge trimmer using a damp cloth with a mild detergent NOTE Do not use any strong detergents on the plastic housing or the handle They can be damaged by certain aromatic oils such as pine and lemon and by solvents such as kerosene STORING THE HEDGE TRIMMER Clean all foreign material from the product Always place blade cover on cutting blades before storing See Figure 8 Store it in a well ventilated place that is inaccessible to children Keep away from corrosive agents such as garden chemicals and de icing salts DISPOSAL This marking in
4. ELGIUM Avenue des Paquerettes 55 Zoning artisanal batiment 5 B 1410 Waterloo BELGIQUE Tel 32 0 2357 8140 Fax 32 0 2357 8149 TTI ITALIA SRL Via Fratelli Gracchi 39 20092 Cinisello Balsamo MI Italia Tel 39 0 5923 8408 Fax 39 0 5924 6960 TECHTONIC INDUSTRIES IBERIA S L Av De la Industria 52 Coslada Madrid Espa a Tel 91 485 12 10 TECHTRONIC INDUSTRIES SOUTH AFRICA CO PTY LTD P O Box 83888 South Hills Johannesburg 2136 South Africa TECHTRONIC INDUSTRIES ASIA CO LTD 24 F CDW Building 388 Castle Peak Road Tsuen Wan Hong Kong Tel 852 2402 6888 RYOBI TECHNOLOGIES GMBH Itterpark 4 D 40724 Hilden DEUTSCHLAND Tel 49 0 2103 2958 0 Fax 49 0 2103 2958 29 Machine ELECTRIC HEDGE TRIMMER Name of company Homelite Far East Co Ltd Address 24 F CDW Building 388 Castle Peak Road Tsuen Wan Hong Kong RYOBI TECHNOLOGIES GMBH Vertriebsb ro sterreich Schinitzgasse 13 A 8605 Kapfenberg Tel 43 0 3862 23590 0 Fax 43 0 3862 23590 25 TECHTRONIC INDUSTRIES AUSTRALIA PTY LIMITED Building B Rosehill Industrial Estate 3 Shirley Street Rosehill NSW 2142 AUSTRALIA Tel 02 8892 1800 or 1300 361 505 Fax 1800 807 993 TECHTRONIC INDUSTRIES NZ LIMITED 27 Clemow Drive Mt Wellington PO Box 12 806 Penrose Auckland NEW ZEALAND Tel 64 0 9 573 0230 Free Call 64 0800 279 624 Fax 64 0 9 573 0231 A amp M M
5. IDDLE EAST FZCO P O Box 61254 Jedel Ali Dubai UNITED ARAB EMIRATES Tel 9714 8861399 Fax 9714 8861400 TECHTRONIC INDUSTRIES DENMARK APS Stamholmen 147 4 DK 2650 Hvidovre Denmark Tlf 43 56 55 55 Fax 43 56 55 56 E mail kundeservice tti emea com TECHTRONIC INDUSTRIES NORWAY AS TIf 800 12 493 Faks 800 12 492 E mail kundetjeneste tti emea com TECHTRONIC INDUSTRIES SWEDEN AB Tel 46 08 24 60 30 fax 46 08 24 60 31 E mail kundtjanst tti emea com TECHTRONIC INDUSTRIES FINLAND OY Tel 0800 1 09000 Fax 0800 1 09001 Email asiakaspalvelu tti emea com Type RHT500R RHT600RL Name title Andrew John Eyre BEng CEng MIET Vice President of Engineering At E 4 2010 Signature
6. You can use a string to help cut your hedge level Decide how high you want the hedge Then stretch a piece of string along the hedge at this height Trim the hedge just above this guide line of string See Figure 5 Trim the side of a hedge so that it will be slightly narrower at the top See Figure 6 More of the hedge will be exposed when shaped this way and it will be more uniform STARTING AND STOPPING Starting Press and hold rear trigger 10 and squeeze front trigger 4 Stopping Release any of switch levers 4 and 10 MAINTENANCE 06 WARNING Before inspecting cleaning or servicing the machine disconnect the plug from power source and wait for all moving parts to stop Failure to follow these instructions can result in serious personal injury or property damage GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use Use clean cloths to remove dirt dust oil grease etc WARNING A Do not at any time let brake fluids gasoline petroleum based products penetrating oils etc come in contact with plastic parts Chemicals can damage weaken or destroy plastic which may result in serious personal injury WARNING Blades are sharp When handling the blade assembly wear non slip heavy duty protective gloves Do not place your hand or fingers between blades or in any position where
7. anty period This warranty does not cover transportation cost or consumable items such as fuses and batteries This limited warranty is void if the product s original identification trade mark serial number etc markings have been defaced altered or removed or if product is not purchased from an authorized reseller or if product is sold AS IS and or WITH ALL FAULTS Where permitted the provisions of this limited warranty are in lieu of any other written warranty whether express or implied written or oral including any warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT SHALL WE BE LIABLE FOR SPECIAL INCIDENTAL CONSEQUENTIAL OR INCIDENTAL DAMAGES OUR MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT This warranty is valid only in the European Union Australia and New Zealand Outside these areas please contact your authorized Ryobi dealer to determine if another warranty applies TECHTRONIC INDUSTRIES EMEA Medina House Field House Lane Marlow Bucks SL7 1TB United Kingdom RYOBI TECHNOLOGIES UK LIMITED Medina House Field House Lane Marlow Bucks SL7 1TB United Kingdom Tel 44 0 1628 894400 Fax 44 0 1628 894401 Technical Helpline 44 0 800 389 0305 TECHTRONIC INDUSTRIES FRANCE SAS Immeuble Le Grand Roissy Z A du Gu 35 rue de Guivry 77990 LE MESNIL AMELOT FRANCE Phone 33 0 1 60 94 69 70 Fax 33 0 1 60 94 69 79 RYOBI B
8. d corded power tool or battery operated cordless power tool WORK AREA SAFETY Keep work area clean and well lit Cluttered or dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep children and bystanders away while operating a power tool Distractions can cause you to lose control ELECTRICAL SAFETY Power tool plugs must match the outlet Never modify the plug in any way Do not use any adapter plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce risk of electric shock Avoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock When operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock If operating a power tool in a damp location is unavoidable use a
9. dicates that this product should not be disposed with other household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable reuse of material resources To return your used device please use the return and collection systems or contact the retailer where the product was purchased They can take this product for environmental safe recycling LIMITED WARRANTY TTI warrants this outdoor product to be free of defects in material and workmanship for 24 months from the date of purchase by the original purchaser subject to the limitations below Please keep your invoice as proof of date of purchase This warranty is only applicable where the product is used for personal and non commercial purposes This warranty does not cover damage or liability caused by due to misuse abuse accidental or intentional acts by user improper handling unreasonable use negligence failure by end user to follow operating procedures outlined in the user s manual attempted repair by non qualified professional unauthorized repair modification or use of accessories and or attachments not specifically recommended by authorized party Please see your local dealer for list of authorized service centers in your area This warranty does not cover belts brushes bags bulbs or any part which ordinary wear and tear results in required replacement during warr
10. g and trimming hedges and bushes in domestic use It is not intended to be used for cutting above shoulder level USING THE CORD RETAINER When using the hedge trimmer make sure that you Secure your extension cord in the cord retainer as shown in Figure 3 If you bought this unit in the United Kingdom with a BS plug it will have a long cord attached to it In that case please secure the cord coming out of the hedge trimmer in a similar way as shown in Figure 3 USING THE ROTATING REAR HANDLE Figure 9 1 Place the hedge trimmer on a flat and even surface and disconnect from the power supply 2 Make sure that you released the triggers 3 Pull the lock lever 8 out and rotate the rear handle Figure 9c 4 Release the lock lever and ensure that it is fully locked in before operating the hedge trimmer ENGLISH USING THE HEDGESWEEP DEBRIS SWEEPER WARNING A Make sure that you disconnect the hedge trimmer from the power supply before attaching or removing the HedgeSweep debris sweeper To avoid clippings and other debris to fall back into the hedge while cutting you can use the HedgeSweep debris sweeper included in RHT600RL to sweep the cuttings off the hedge You can attach the HedgeSweep debris sweeper by sliding it onto the rail as shown in Figure 2 The sloped end of it should be facing the motor housing of the hedge trimmer To remove HedgeSweep just pull it towards the open end of the blade If desired
11. the manner intended for the particular type of power tool taking into account the working conditions and the work to be performed Use of the power tool for operations different from intended could result in a hazardous situation SERVICE Have your power tool serviced by a qualified repair person using only genuine replacement parts This will ensure that the safety of the power tool is maintained HEDGE TRIMMER SAFETY WARNINGS Keep all parts of the body away from the cutter blade Do not remove cut material or hold material to be cut when blades are moving Make sure the switch is off when clearing jammed material A moment of inattention while operating the hedge trimmer may result in serious personal injury Carry the hedge trimmer by the handle with the cutter blade stopped When transporting or storing the hedge trimmer always fit the cutting device cover Proper handling of the hedge trimmer will reduce possible injury from the cutter blades Keep cable away from cutting area During operation the cable may be hidden in shrubs and can be accidentally cut by the blade ADDITION Advice to check the hedge trimmer for foreign objects e g wire fences Recommendation for the use of a residual current device with a tripping current of 30mA or less Instruction to hold the hedge trimmer properly e g with both hands if two handles are provided Important Some of the following symbols may be used on this product Please s
12. tion and collection facilities ensure these are connected and properly used Use of dust collection device can reduce dust related hazards POWER TOOL USE AND CARE Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source before making any adjustments changing accessories or storing power tools Such preventative safety measures reduce the risk of starting the power tool accidentally ENGLISH Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tool s operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools Keep cutting tools sharp and clean Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control Use the power tool accessories and tool bits etc in accordance with these instructions and in
13. tudy them and learn their meaning Proper interpretation of these symbols will allow you to operate the product better and safer SYMBOL NAME EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency cycles per second Watt Power Hours Time Class Construction Double insulated construction Wet Conditions Alert Do not expose to rain or use in damp locations Safety Alert Symbol Precautions that involve your safety Read the Operator s Manual Eye and ear Protection El A 9 e To reduce the risk of injury user must read and understand operator s manual before using this product Wear eye and ear protection when operating this equipment ENGLISH Electric Shock Precaution Remove plug from the mains immediately if cable is damaged or cut The following signal words and meanings are intended to explain the levels of risk associated with this product SYMBOL SIGNAL MEANING 1 Indicates an imminently hazardous situation which if not avoided will result in DANGER 8 FER death or serious injury A WARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury A CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION Without Safety Alert Symbol Indicates a situation that may result in propert
14. y E damage SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician For service we suggest you return the product to your nearest authorized service centre for repair When servicing use only identical replacement parts WARNING Observe all normal safety precautions related to avoiding electrical shock SPECIFICATION MODEL RHT500R RHT600RL Voltage 220 240 V 220 240 V Power 500 W 600 W Cutting Capacity 24mm 27mm Blade Length 550 mm 600 mm Blade Speed 1500 SPM 1500 SPM Brake Time is is Weight without cord 3 5 kg 3 8 kg Sound Pressure Level L54 84 dB A Kpa 3 0 dB A Sound Power Level Lwa 99 dB A Kya 3 0 dB A Vibration ap 3 7 m s K 1 5 m s Fig 1 1 Blade cover 2 Cutting blades 3 Safety Guard 4 Front trigger 5 Rear handle 6 Livetool indicator 7 Cord retainer 8 Lock lever for rotating handle 9 HedgeSweep debris sweeper only included in RHT600RL optional available for RHT500R 10 Rear handle trigger OPERATION WARNING Always remove the blade cover before using the hedge trimmer Warning 1 The blades continue to move for a fraction of a second after the hedge trimmer is switched off 2 Do not touch the moving blades 3 When using the tool always ensure that the cord is safely held in the cord retainer as described later in this manual INTENDED USE This hedge trimmer is intended for cuttin
Download Pdf Manuals
Related Search