Yamaha NS-F700
Contents
1. YAMAHA CORPORATION 2008 Yamaha Corporation All rights reserved Printed in Indonesia WP15000 12. 2002 96
3. 3 1 16 1 13 3 60 45 50 10 40 160 89 2 83 700 4 co x
4. e
5. YAMAHA Speaker Enceinte OWNER S MANUAL MODE D EMPLOI BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES FA ik AA Thank you for selecting this YAMAHA product PRECAUTIONS Read this before using the speaker To assure the finest performance please read this manual carefully Keep it in a safe place for future reference Install the speaker in a cool dry clean place away from windows heat sources sources of excessive vibration dust moisture and cold Avoid sources of electrical noise transformers motors To prevent fire or electrical shock do not expose this unit to rain or water To prevent the enclosure from warping or discoloring do not place the speaker where it will be exposed to direct sunlight or excessive humidity Do not place the following objects on the speaker Glass china small metallic etc If glass etc falls as a result of vibration and breaks it may cause personal injury A burning candle etc If the candle falls as a result of vibrations it may cause fire and personal injury A vessel with water in it If the vessel falls as a result of vibrations and water spills it may cause damage to the speaker and or you may get an electric shock Do not place the speaker where foreign material such as dripping water It might cause fire damage to this unit and or personal injury Do not place the speaker wher
6. Repairs performed by the customer himself or by an unauthorised third party 2 Inadequate packaging or mishandling when the product is in transit from the customer Please note that it is the customer s responsibility to ensure the product is adequately packaged when returning the product for repair 3 Misuse including but not limited to a failure to use the product for its normal purpose or in accordance with Yamaha s instructions on the proper use maintenance and storage and b installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used 4 Accidents lightning water fire improper ventilation battery leakage or any cause beyond Yamaha s control 5 Defects of the system into which this product is incorporated and or incompatibility with third party products 6 Use of a product imported into the EEA and or Switzerland not by Yamaha where that product does not conform to the technical or safety standards of the country of use and or to the standard specification of a product sold by Yamaha in the EEA and or Switzerland 7 Non AV Audio Visual related products Products subject to Yamaha AV Guarantee Statement are defined our website at http www yamaha hifi com http www yamaha uk com for U K resident 5 Where the guarantee differs between the country of purchase and the country of use of the product the guarantee of the c
7. shielding type csr Gus 16 cm 6 5 cone woofer x 1 Advanced PMD 13 cm 5 cone mid range x 1 Advanced PMD 3 cm 1 aluminum dome tweeter DC diaphragm TmpedanCe ccs 60 Frequency Response 45 Hz to 50 kHz 10 dB Nominal Input 40 W Maximum Input 160 W Tats 89 dB 2 83 V m Crossover Frequency 700 Hz 4 kHz Dimensions with stands W x H x D 354 x 1012 x 374 mm 13 15 16 x 39 13 16 x 14 3 4 25 kg 55 lbs 2 oz Specifications subject to change without notice due to product improvements Care should be taken not to exceed the input power values noted above A speaker cable is not included with this model Taking care of the speaker When you wipe this unit do not use chemical solvents e g alcohol or thinners etc this might damage the finish Use clean dry cloth For difficult soils dampen a soft cloth in detergent diluted with water wring it out and then wipe with the cloth Limited Guarantee for European Economic Area EEA and Switzerland Thank you for having chosen a Yamaha product In the unlikely event that your Yamaha product needs guarantee service please contact the dealer from whom it was purchased If you experience any difficulty please cont
8. to person and or damage to personal property For safe and proper use of the speaker Position the speaker in a location that is solid level smooth and low with respect to the floor Do not push or apply pressure to the side of the speaker when moving or lean objects against the side of the speaker Do not sit on set objects on top of the speaker Vibrations or jolts associated with earthquakes and other phenomena or activities may cause the speaker to fall over For safety reasons using commercially available products that increase stability of the speaker is recommended metal fittings or chains etc Use the stands included with the speaker to increase stability Be sure to use the stands regardless of where the speaker is positioned Attaching the stands included with the speaker reinforces the base of the speaker so as not to fall over Please be cautioned that even though the stands are connected this does not guarantee that the speaker will not fall over mProcedure 5 LI E D ACC ESSO RI ES 1 Putthe 6 mm 1 47 screw through the large hole in the stand and screw it into the speaker at one of the outside holes in the base of the speaker At this time screw it in loosely so that the stand can still be moved Put the 4 mm 3 16 wood screw through the other hole in the stand and screw it into the other hole in the base of the L R After unpacking check that the following parts ar
9. Better stereo images will be obtained when the speakers are slightly angled in towards the listeners 5 as front speakers in a multi channel system Position the speakers on both sides of the TV The positioning of speakers is important since this dictates the overall sound quality of the multi channel system Set up the speakers on the basis of your listening position by following the owner s manual supplied with your amplifier NS F700 Surround back Surround Notes e Placing this unit too close to a CRT TV set might impair picture color or create a buzzing noise Should this happen move the speaker away more than 20 cm 7 7 8 from the TV set To avoid accidents resulting from tripping over loose speaker cables fix them to the floor 2 En CONNECTIONS TO YOUR AMPLIFIER This speaker system is capable of standard connections and bi wire connection Before making connections make sure that the amplifier is switched off Standard connections Leave the short bars in place when connecting Loo Short bar Insulation 4 coating NS F700 NS F700 Speakers output terminals of the amplifier or receiver Amplifier or Receiver Connect the screw type input terminals at the rear of the speakers to the speaker output terminals of the amplifier or receiver with the speaker cable Connect the terminals on the amplifier or receiver to t
10. act Yamaha representative office in your country You can find full details on our website http www yamaha hifi com or http www yamaha uk com for U K resident The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase Yamaha undertakes subject to the conditions listed below to have the faulty product or any part s repaired or replaced at Yamaha s discretion without any charge for parts or labour Yamaha reserves the right to replace a product with that of a similar kind and or value and condition where a model has been discontinued or is considered uneconomic to repair Conditions 1 The original invoice or sales receipt showing date of purchase product code and dealer s name MUST accompany the defective product along with a statement detailing the fault In the absence of this clear proof of purchase Yamaha reserves the right to refuse to provide free of charge service and the product may be returned at the customer s expense 2 The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area EEA or Switzerland 3 The product must not have been the subject of any modifications or alterations unless authorised in writing by Yamaha 4 The following are excluded from this guarantee a Periodic maintenance and repair or replacement of parts due to normal wear and tear b Damage resulting from 1
11. e contained N speaker Tighten both of the screws firmly Scre 6mm 1 4 x4 Attach a pad to the bottom of the end portion of the stand Stand R x 2 L x 2 gt Attach the other stands to the other corners of the base of the speaker in the same way and confirm that all 4 stands have wr been firmly attached Wood screw Pad x 4 4mm 3 16 x 4 Pad ATTACHING THE STANDS When placing the speakers be sure to use the stands to increase Wood screw 4mm 3 16 stability Notes Make sure to have another person support it Pay extra attention to avoid scratching on the speaker s surface Place the speaker on a supporting surface height of 7 cm 2 3 4 or more Use a blanket or a cushion on it to avoid scratching The provided stands are in two types Two stands are for the right side and others are for the left side Attach each stand to the proper position on the bottom of the speaker by following the figure below To attach the stands to the speaker be sure to lay down the speaker with the side facing up Note Be carefully not to apply force to the side of the speaker otherwise the speaker may fall causing damage to the speaker or personal injury Back Front 67 5 R View from the bottom of the speaker Use the 8 specified holes located on the base of the speaker 1 En PLACING THE SPEAKERS Using as 2 stereo speakers
12. e it is liable to be knocked over or struck by falling objects Stable placement will also ensure better sound performance Placing the speaker on the same shelf or rack as the turntable can result in acoustical feedback Never put a hand or a foreign object into the port located on the rear of the speaker as this might cause personal injury and or damage to the speaker e When moving the speaker do not hold the port as it might cause personal injury and or damage to the speaker Any time you notice distortion reduce the volume control on your amplifier Never allow your amplifier to be driven into clipping Otherwise the speaker may be damaged When using an amplifier with a rated output power higher than the nominal input power of the speaker care should be taken never to exceed the speaker s maximum input Do not attempt to clean the speaker with chemical solvents as this might damage the finish Use a clean dry cloth Do not attempt to modify or repair the speaker Contact qualified YAMAHA service personnel when any service is needed The cabinet should never be opened for any reasons Secure placement and installation is the owner s responsibility YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers i Information for Users on Collection and Disposal of Old Equipment This symbol on the products packaging and or accompanying doc
13. he terminal of each speaker making sure to confirm the color coded wire of the cable at each end Use the other wire of the cable to connect the terminals of the components Connect one speaker to the left marked L terminals of your amplifier and another speaker to the right marked R terminals making sure not to reverse the polarity If one speaker is connected with reversed polarity the sound will be unnatural and lack bass to connect E About Bi Wire Connection 1 Loosen the knob This speaker system is capable of bi wire connection To connect the speaker to the output terminals of the amplifier or receiver two pairs of cables for each of mid range woofer and tweeter used instead of standard connections 2 Remove 10 mm 3 8 of insulation from each end of the cables and twist the exposed conductors together neatly and tightly as shown below This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving current of 10 mm the speakers 3 8 Consequently purer sound quality can be expected To utilize bi wire connection remove the short bars from the terminals first and then connect the mid range woofer and tweeter to the amplifier separately using two pairs of cables Good No Good 3 Insert the bare wire 4 EWhen using banana plug Tighten the knob and secure the cables Test the firmness of the connection by pul
14. ling lightly on the Note cables atithe terminal Do not take off this cover unless using a banana plug Notes Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier or both Do not insert the insulation into the hole Sound may not be produced Banana plug Bi wire connection Remove the short bars before connecting Tweeter terminals Black 1 Tighten the terminal knob 2 Remove the cover by pulling it toward you 3 Simply insert the banana plug into the terminal Note Use a suitable instrument to remove the cover Removing it with your bare hands may hurt your fingertips SPEAKERS Both SPEAKERS A and B should be selected En ATTACHING THE FRONT COVER The speaker and the front cover are packed separately To attach the front cover line up the projections magnets on the reverse side of the front cover with their corresponding screw heads on the speaker Notes When removing the cover be careful that you don t touch the drive units and don t exert excessive force with any tools There are magnets on the reverse side of the front cover Do not place the front cover close to objects that might be affected by magnets such as CRT TV clock magnetic card diskette etc after removing it 4 SPECIFICATIONS 3 way bass reflex speaker system Non Magnetic
15. ountry of use shall apply 6 Yamaha may not be held responsible for any losses or damages whether direct consequential or otherwise save for the repair or replacement of the product 7 Please backup any custom settings or data as Yamaha may not be held responsible for any alteration or loss to such settings or data 8 This guarantee does not affect the consumer s statutory rights under applicable national laws in force or the consumer s rights against the dealer arising from their sales purchase contract 5 En
16. uments means that used electrical and electronic products should not be mixed with general household waste For proper treatment recovery and recycling of old products please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC By disposing of these products correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products please contact your local municipality your waste disposal service or the point of sale where you purchased the items For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further information Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal PRECAUTIONS WHEN POSITIONING THE SPEAKERS The speaker is constructed with the majority of the weight located in its upper portion and is thus susceptible to falling over if proper care is not taken to insure its stability If the speaker falls over it may damage the speaker or be the cause of injury or even death
Download Pdf Manuals
Related Search