Beko DCU 7330 X tumble dryer
Contents
1. a Cancel Press Delicates aes amp Hold 3 sec Timer Programmes 1 Washing machine spin speed Timer pro 5 On Off button gramme selection Used to turn on and off the machine Spin speed used to spin the laundry in the 6 Anti creasing washing macthine Indicates the time for Prevents the laundry from creasing after the timer programs machine completes its programme 2 Display 7 Dryness level Indicates the status of the machine Used to adjust the required dryness level 3 Start Pause Cancel button 8 Cancel audio warning Used to start pause or cancel the Used to cancel the audio warning given at programme the end of the programme 4 Programme selection knob 9 Time delaying buttons Used to select a programme Used to set the time delay IIL a ica aan g v i pil mit IBBD Spin speed Timer programmes mo Child proof lock warning icon gt Operation icon X Time delaying mode Il Pause icon Q _ Door open warning icon w Water tank full warning icon Anti creasing mode FH Filter cleaning warning icon A Audio warning level Cancel audio warning E Condenser cleaning warning icon mwe Drying degree HEE Remaining time indicator wv Anti creasing is activated Spin speed is used to show the remaining time more accurately It does not affect the performance of your machine 12 EN A 8 O a La P2. To drain the water tank 1 Pull the drawer and remove the water tank carefully a 3 If there is lint accumulation in the funnel of the water tank clean it under running water 4 Place the water tank into its seat For the condenser Hot and humid air in the condenser is cooled with the cold air from the room Thus the humid air circulating in your dryer is condensed and then pumped into the tank Clean the condenser after every 30 drying cycles or once a month To clean the condenser 1 If a drying process has been carried out open the door of the machine and wait until it cools down 2 Unlock the 2 condenser locks after opening the kick plate 21 EN 4 Clean the condenser by applying pressurized water with a shower armature and wait until the water drains 5 Place the condenser in its housing Fasten the 2 locks and make sure that they are seated securely 22 EN 6l Suggested solutions for problems Drying process takes too much time e Meshes of the filter may be clogged Wash with water Laundry comes out wet at the end of drying e Meshes of the filter may be clogged Wash with water e Excessive laundry might have been loaded in Do not load the dryer in excess Dryer does not switch on or the programme does not start Dryer is not activated when set e t might have not been plugged in Make sure tha
3. certainly open the door pay attention not to keep it open for a long time the air during the drying cycle are collected e in the Lint Filter Make sure that you clean the filters before or after each drying e In models with condenser make sure that you clean the condenser regularly at least once every month or after every 30 drying cycles e Invented models follow the chimney connection rules in the user manual and pay attention to the chimney cleaning e Ventilate the room where the dryer is located well during drying A e For power saving in models with lamps at times when your dryer is not in use keep the door closed if the On Off button is pressed if the dryer is energized k Laundry suitable for drying in the machine Always follow the suggestions on the laundry labels Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme bd 9 EN Ol oe J x a Normal Low Suitable for Do not dry temperature temperature drier with drier Drying Drying Hang without Dry on a Rone spinning hanger Can be ironed _ Canbe Do not iron with hot iron ironed with warm iron e Do not add new wet laundry during drying Laundry unsuitable for drying in e Lint and fibres released from the laundry to the machine Laundry items with metal attachments such as belt buckles and metal buttons can
4. chapters of this manual Disposing of packaging material Packaging materials are dangerous to children Keep packaging materials in a safe place out of reach of children Packaging materials of your product are manufactured from recyclable materials Sort and dispose of them in accordance with recycled waste instructions Do not dispose of them with normal domestic waste 1 Remove the ose on the machine by pulling it out from its end Do not use any tools to take out the hose 2 Connect the special drain hose supplied with the machine to the pipe fitting 3 The other end of the drain hose can be directly connected to the wastewater drain or to the washbasin The fitting must always be secured in all types of connections Your house may be flooded if the hose gets out of its housing during water discharge imponan The hose should be attached to a height of maximum 80 cm e You must be careful not the pinch or bend the hose e The end of the hose should not be bent it should not be stepped on and it must not be folded between the drain and the machine Adjusting the feet In order to ensure that your machine operates more silently and vibration free it must stand level and balanced on its feet Balance the machine by adjusting the feet Rotate the feet to adjust until the machi
5. damage your dryer Do not dry items such as woollens silk garments and nylon stockings delicate embroidered fabrics laundry with metal accessories and items such as sleeping bags in the dryer Laundry made of delicate and valuable fabrics as well as lace curtains can be creased Do not dry them in the dryer Do not dry items made of hermetic fibres such as pillows and quilts in the dryer Laundry made of foam or rubber will be deformed Do not dry laundry containing rubber in the dryer Do not dry laundry exposed to petroleum oil combustible or explosive agents in the dryer even if they are washed beforehand Overly wet laundry or laundry with dripping water must not be put into the dryer Items cleaned or washed with gasoil fuel oil dry laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor Do not dry items cleaned with industrial chemicals in the dryer Do not dry your unwashed laundry in the dryer Items soiled with cooking oils acetone P Correct load capacity reparing alcohol fuel oil kerosene stain remover turpentine paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer Garments or pillows bolstered with rubber foam latex foam shower bonnets water resistant textiles material
6. water in the water tank Press Start Pause Cancel button to start the programme after you have emptied the water tank The warning symbol turns off and the programme resumes operating Cleaning the condenser 16 EN Warning symbol turns on with certain intervals to remind that the condenser needs cleaning Door open Dryer door open symbol lights up gt MIZ Z Lich IL 2 A ut MA Time delay With the Time delay function you can y the programme start up to 24 hours 1 Open the loading door and put the laundry in 2 Set the drying programme and spin speed and if required select the auxiliary functions 3 Press Time delaying buttons and to set the desired time da The time delay symbol will flash 4 Press Start Pause Cancel button Then the time delay starts to count down The Time delay symbol lights up Start symbol lights up The in the middle of the displayed time delay will start flashing More laundry may be loaded or taken out during the time delay period At the end of the time delay countdown process time delay symbol fades drying process starts and the programme duration is displayed The time on the display is the total of normal drying time and delay time Time delay is started by pressing the start pause cancel button in the exemplary figure oo Changing the delay time If you want
7. you change the position of programme selection knob while your machine is running then the machine stops current programme is cancelled and new programme information is displayed End of programme Filter cleaning and Water tank warning symbols light up and End label appears on the screen in the programme follow up indicator when the programme ends The door can be opened and the machine becomes ready for a second cycle Press On Off button to turn off the dryer When selected the 2 hour anti creasing programme will be activated to prevent laundry from creasing if you do not take the laundry out after the programme has come to an end Clean the filter after each drying please see Filter cleaning Drain the water tank after each drying please see Water tank 19 EN Maintenance and cleaning Filter Cartridge Door Inner Surface Lint and fibres released from the laundry to the air during the drying cycle are collected in the Filter Cartridge YF Such fibre and lint are generally formed during wearing and washing Always clean the filter and the inner surfaces of the cover after each drying process f You can clean the filter and filter area by vacuum cleaner To clean the filter 1 Open the loading door 2 Remove the cover filter by pulling it up and open the filter 3 Clean lint fibre and cotton raveling by
8. Dryer DCU 7330 X Read this manual prior to initial operation of the product Dear Customer We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you very good results We advise you to read through this manual carefully before using your product and keep it for future reference This User Manual will e Help you use your machine in a fast and safe way e Read the User Manual before installing and starting your product e In particular follow the instructions related to safety e Keep this User Manual within easy reach for future reference e Please read all additional documents supplied with your product Remember that this User Manual is also applicable for several other models Explanation of symbols Throughout this User Manual the following symbols are used Important safety information Warning for hazardous situations with regard to life and property Caution Warning for supply voltage Caution Warning for fire hazard Caution Warning for hot surfaces Read the instructions EB epee Useful information Important information or useful hints about usage This appliance s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose Your appliance also contains a great amount of recyclable material It is marked with this label to ind
9. a reasing For further programme details see Programme Selection Table Main programmes Depending on the type of laundry the following main programmes are available eCottons You can dry your durable laundry with this programme Dries at high temperature It is recommended to use for your cotton items Such as bed sheets quilt cover underclothing etc eSynthetics You can dry your less durable laundry with this programme It dries at a lower temperature compared to the cottons programme It is recommended for your synthetic laundry such as shirts blouses synthetic cotton blended laundry etc Do not dry curtains and lace in your machine Special programmes For special cases there are also extra programmes available Additional programmes may differ according to the model of your machine eXpress 35 You can use this programme to dry your cotton laundry that you have spun at high speeds in your washing machine This program dries 1 5 kg cotton laundry 2 Shirts 5 T shirts in 35 minutes To obtain better results from your dryer your laundry must be washed at suitable programmes and spun at the recommended spin speeds in the washing machine 13 EN eShirt This programme dries the shirts more sensitively and creases them less and thus helps to iron them more easily There may be a little humidity on your shirts at the end of the programme We recommend you not to leave t
10. acetone alcohol fuel oil kerosene stain remover turpentine paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer Garments or pillows bolstered with rubber foam latex foam shower bonnets water resistant textiles materials with rubber reinforcement and rubber foam pads should not be dried in the dryer Do not use fabric softeners and anti static products unless they are recommended by the manufacturers of the fabric softener or the product Oil affected items can ignite spontaneously especially when exposed to heat sources such as in a tumble dryer The items become warm causing an oxidation reaction in the oil Oxidation creates heat If the heat cannot escape the items can become hot enough to catch fire Piling stacking or storing oil affected items can prevent heat from escaping and so create a fire hazard If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent this will reduce but not eliminate the hazard This product must be grounded Grounding installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure Power cable of this product is equipped with a conductor and a grounding plug that allows for groundi
11. e Use the product only for drying laundry that are marked accordingly e Dry only those articles in your product that are stated in this manual e This product is not intended to be used by persons with physical sensory or mental disorders or unlearned or inexperienced people including children unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product 4 EN Children s safety Electrical appliances are dangerous for the children Keep children away from the machine when it is operating Do not let them tamper with the machine e Packaging materials are dangerous to children Keep the packaging materials out of reach of children or dispose them by classifying according to waste directives e Do not allow children sit climb on or enter in the product e Children should be supervised to ensure that they do not play with the product e Close the loading door when you leave the area where the product is located 5 EN 2 Installation Refer to the nearest Authorised Service Agent for installation of your product 0 Preparation of location and electrical installation for the product is under customer s responsibility Alnstallation and electrical connections must be carried out by a qualified personnel A Prior to installation visually check if the A product has any defects on it If so do not have it installed Damaged pr
12. e start up of the programme 1 Press the Start Pause Cancel button to switch the machine to Pause mode Drying process will stop 2 Open the door at Pause position and close it again after adding or taking out laundry 3 Press Start Pause Cancel button to start the program Any laundry added after the drying process was started may cause the already dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over Laundry may be added or taken out as much as desired during a drying process but as this process will interrupt drying continuously it will extend the program duration and increase energy consumption Therefore it is recommended to add laundry before the drying programme has started g If you select a new programme by turning the programme selection knob while your machine is in standby then the current program is cancelled and new programme information is displayed Child proof lock There is a child proof lock to prevent any programme interruption due to the pressing of button while the programme is running The loading door and all button except the On Off button on the panel are deactivated when the child proof lock is active In order to activate the child proof lock press on the audio warning and anti creasing buttons simultaneously for 3 seconds To start a new programme after the programme is ove
13. ed Place your laundry into the drum loosely so that they will not get tangled Large pieces E g bed sheets quilt covers large tablecloths may bunch up Stop the dryer 1 2 times during drying process to separate bunched up laundry Following weights are given as examples Approximate Home articles weights g Cotton quit covers double 1500 Cotton quit covers single 1000 Bed sheets double 500 Bed sheets single 350 Large tablecloths 700 Small tablecloths 250 Tea napkins 100 Bath towels 700 Hand towels 350 Approximate Garments weights g Blouses 150 Cotton shirts 300 Shirts 200 Cotton dresses 500 Dresses 350 Jeans Handkerchiefs 10 pieces T Shirts 10 EN Loading the laundry 1 Open the loading door 2 Place the laundry in the machine without compressing 8 Push the loading door to close A Ensure that no items are caught in the door 11 EN 4 Selecting a Programme and Operating Your Machine Control panel Oo Shirts Jeans Daily B ps 6 XI 35 Iron Dry renee Zab Synthetics N ool upboart Go QE Mie Refresh ra Sao tt 8 pin Time A Mix Iron Dry A A Cupboard a Sport A Dry Cottons Time Delay o
14. efore using the product for the first time Do not leave any items inside the drum Under counter installation e A special part Part no 297 360 0100 replacing the top trim must be provided and installed by the Authorised Service Agent in order to use the machine under a counter or in a cupboard It should never be operated without the top trim e Leave at least 3 cm of space between the side and rear walls of the product and the walls of the counter cupboard when installing your product under a counter or in a cupboard Mounting over a washing machine e A fitting device should be used between the two machines when installing above a washing machine The bracket Part no 297 720 0200 white 297 720 0500 grey must be installed by the Authorised Service Agent e Place the product on a firm floor If it will be placed on top of a washing machine the approximate weight of both machines may reach 180 kg when they are full Therefore the floor must be capable of carrying the load on it Connection to water drain In products equipped with a condenser unit the water accumulated during the drying cycle is collected in the water tank You should drain the accumulated water after each drying cycle You can directly send the accumulated water out through the water drain hose supplied with the machine instead of 6 EN periodically draining the water collected in Never unscrew the adjustable feet from the water tank thei
15. g carried out Drying Lights up in all programmes apart from drying and ventilation Iron Dry Starts to illuminate when the drying degree reaches iron dry step and remains illuminated until the next step Cupboard Dry Starts to illuminate when the drying degree reaches wardrobe dry step and remains illuminated until the next step Extra Dry Starts to illuminate when the drying degree reach to wardrobe dry extra step Ventilation Illuminates when the programme ends Drying 17 EN Anti creasing icon will light up at the end of the programme if anti creasing function is active Changing the programme after the programme has started You can use this feature to dry your laundry in a different program after your machine has started to run O J p m LI r C For example Press and hold the Start Pause Cancel button for about 3 seconds to Cancel the programme in order to select Extra Dry programme instead of Iron Dry programme Select the Extra Dry program by rotating the program knob Press Start Pause Cancel button to start the program If you select a new programme by turning the programme selection knob while your machine is running then the current program is cancelled and new programme information is displayed Adding removing laundry in standby mode In order to add or take out laundry after th
16. hand or with a soft piece of cloth 4 Close the filter and place it back into its seat Clogging may arise on the filter surface after using your machine for some time if this occurs wash the filter with water and dry it before using again Clean the entire inner surface of the cover and door gasket Sensor There are humidity sensors in your dryer that detect whether the laundry is dry or not To clean the sensor 1 Open the loading door of the dryer 2 Allow the machine to cool down if drying has been carried out 3 Wipe the metal sensors with a soft cloth dampened with vinegar and dry them Clean metal sensors 4 times a year A Never use solvents cleaning agents or similar substances when cleaning since these materials can cause fire and explosion 20 EN Water tank The moisture in the damp laundry is taken from the laundry and condens ed Drain the water tank after each drying cycle or during drying when Water tank warning light turns on A Condensed water is not drinkable A Never take out the water tank when the programme is running If you forget to drain the water tank your dryer will stop during the following drying cycles when the water tank is full and the Water tank warning light will turn on If this is the case press the Start Pause Cancel button to resume the drying cycle after draining the water tank
17. he shirts in the dryer eJeans You can use this programme to dry your jeans that you have spun at high speeds in your washing machine Review the relevant section in the programme table eMixed Used to dry synthetic and cotton laundry that do not release colour Used for laundry that is suitable for drying eSport Used to dry the laundry that are made of synthetic cotton or mixed fabrics and have a tag indicating that they are suitable for drying eWool Refresh You can use this function to ventilate and soften your woolen laundry that can be washed in the washing machine Do not use this function to dry your laundry completely Take out your laundry and ventilate them immediately after the program is over eDaily This programme is used to dry cottons and synthetics daily and lasts for 1 hour eBabycare This programme is used for baby clothes that bear machine dryable approval on its label eDelicates You can dry your highly delicate laundry that are suitable for drying or laundry which is advised to be hand washed at a lower temperature E Itis recommended to use a cloth bag to prevent certain delicate laundry from getting creased or damaged Take your laundry immediately out of the dryer and hang them after the programme ends in order to prevent them being creased eFreshen Up Only ventilation is performed for 10 Tminutes without blowing hot air You can air your clothes that have been kep
18. icate the used appliances that should not be mixed with other waste E This way the appliance recycling organised by your manufacturer will be done under the best possible conditions in compliance with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment 2960310535_KM 221211 1055 Important safety information This section includes safety information that will help protection from risks of personal injuries or materialistic damages Failure to follow these instructions shall cause any warranty and reliability commitment to become void General safety Never place the machine on a carpet covered floor otherwise lack of airflow beneath the machine may cause electrical parts to overheat This will cause problems with your machine If the power cable or mains plug is damaged you must call Authorised Service Agent for repair The product should not be plugged in during installation maintenance and repair works Such works should always be made by the technical service Manufacturer shall not be held responsible for damages arising from processes carried out by unauthorised persons Connect the product to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table Operate your product at temperature
19. lus th Synthetics Express 35 Timer rograms Ventilation Anti Creasing rd Cupboard dry dry plus CAO fin Dil bar Buzzer cancel Filter Shirt cleaning Jeans Start pause cancel Child proof Dryness lock Level MIOR RL 3 KP ho 1 Babycare Sport Spin Mixed Timer elay Preparing the machine 1 Plug in your machine 2 Place the laundry in the machine 3 Press the On Off button Pressing the On Off button does not necessarily mean that the programme has started Press Start Pause Cancel button of the machine to start the programme Programme selection Decide the appropriate programme from the table below which includes drying temperatures in degrees Select the desired programme with the programme selection knob Drying at high temperature only for cotton laundry Thick and multi layered laundry E g towels linens jeans are dried in a way that they do not require ironing before placing in the wardrobe Normal laundry E g tablecloths underwear are dried in a way that Extra dry Cupboard dry they do not require ironing before placing in the wardrobe Normal laundry E g Shirts dresses are dried ready to be ironed Wool Drying Drying Delicates End anti Refresh Rack
20. ne stands oe and firmly 7 EN Transportation of the machine 1 Unplug the machine from the mains 2 Remove the water drain if any and chimney connections 3 Drain water remained in the machine completely before transportation Disposing of the old machine Dispose of your old machine in an environmentally friendly manner Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your machine Before disposing of your old machine cut off the power cable plug and make the loading door lock unusable to avoid dangerous conditions to children Technical specification EN eight net 36 kg oltage i See type label Model code Type label is located behind the loading door 8 EN 3 Initial preparations for drying Things to be done for energy saving Make sure that you operate the product at its full capacity but pay attention to not exceeding it e Spin your laundry at the highest speed possible when washing them Thus the drying time is shortened and energy consumption is decreased e Pay attention to dry same types of laundry together e Follow the instructions in the user manual for programme selection e Make sure that sufficient clearance is provided at the front and rear side of the dryer for air circulation Do not block the grill at the front side of the product e Do not open the door of the machine during drying unless necessary If you must
21. ng the product This plug must be installed appropriately and inserted into a socket which is grounded in accordance with the local laws and regulations Do not install the product behind a door with a lock sliding door or a door that has a hinge against the hinge of the dryer Do not install or leave this product in places where it will be exposed to outdoor conditions Do not tamper with the controls Do not perform any repair or part replacing procedures on the product even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the published service manual Inside and exhaust duct of the product must be cleaned by the qualified service personnel periodically Wrong connection of grounding conductor of the product can cause electric shock If you have any suspect about the grounding connection have it checked by a qualified electrician service representative or service personnel Do not reach into the machine when the drum is spinning Unplug the machine when it is not in use Never wash down the appliance with water There is the risk of electric shock Always disconnect by unplugging from the mains before cleaning Never touch the plug with wet hands Never unplug by pulling on the cable always pull out by grabbing the plug only Do not operate the machine if the power cable or plug is damaged Never attempt to repair the machine yourself otherwise you will be p
22. oducts will cause risks for your safety ppropriate installation location Install the product in an environment which has no risk of freezing and is ina stable and level position Operate your product in a well ventilated dust free environment Do not block the air ducts in front of and under the product with materials such as long pile rugs and wooden bands Do not place your product on a long pile rug or on similar surfaces Do not install the product behind a door with a lock sliding door or a hinged door which can strike the product Once the product is installed it should stay at the same place where its connections have been made When installing the product make sure that the rear wall of it does not touch anywhere tap socket etc and also pay attention to install the product at a place where it will stay permanently A Do not place the product on top of the R power cable Keep at least 1 5 cm distance to walls of other furniture emoving the transportation safety assembly ZA Remove the transportation safety k assembly before using the product for the first time Open the loading door There is a nylon bag inside the drum that contains a piece of styrofoam Hold it from its section marked with XX Pull the nylon towards yourself and remove the transportation safety assembly A Make sure that you have removed the transportation safety assembly nylon styrofoam pieces b
23. on values Capacity Energy consumption value Energy Energy Label standard program AS NZS 2442 All values given in the table have been fixed according to standard laboratory conditions These values may deviate from the table according to the laundry type laundry spin speed environmental conditions and voltage fluctuations 15 EN Auxiliary function Audio Warning A A A Cancel Audio warning Audio warning audio warning level 1 level 2 A Audio warning level 3 Your dryer will give an audio warning when the programme comes to an end If you do not want to hear this buzzing or want to change the volume level you need to press the Volume level button No audio warning will be given when x appears on the screen You can select this function either before or after the programme starts Drying degree ayta axt tea X Used to adjust the required dryness level More drying is performed compared to the default settings when sign appears and less drying is performed when sign appears Programme duration can change depending on the selection A This function must be selected before the programme starts Anti creasing 2 tt v A A AJ A 34 v A 2 hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out afte
24. r housings Connecting the water drain hose Electrical connection Connect the machine to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table Our company shall not be liable for any damages that will arise when the machine is used on a circuit without grounding e Connection must comply with national regulations e If the current value of the fuse or breaker in the house is less than 10 Amps have a qualified electrician install a 10 Amp fuse e Power cable plug must be within easy reach after installation e The voltage and allowed fuse or breaker protection are specified in the Technical Specifications section e The specified voltage must be equal to your mains voltage Do not make connections via extension cables or multi plugs e The main fuse and switches must have a contact distance of minimum 3 mm A Damaged power cable must only be replaced by a qualified electrician Alf the product is faulty it must not be operated unless it is repaired There is the risk of electric shock First use e To have the product ready for operation before calling the authorised service agent make sure that its location and power supply installations are appropriate If they are not calla qualified electrician to have any necessary arrangements carried out e Make sure that the power connections of the product are in accordance with the instructions given in relevant
25. r or to interrupt the programme the child proof lock should be deactivated Press the same buttons for 3 sec again to deactivate the child proof lock Lock symbol will appear on the screen when the child proof lock is activated 0 Child proof lock will also be deactivated when the machine is restarted by pressing the on off button When the child proof lock is activated e Display icons will not change even if the position of programme selection knob is changed while the machine is running or in halt e f the child proof lock is deactivated after changing the position of the programme selection knob while your machine is running your machine stops and new programme information is displayed 18 EN Ending the programme through canceling Inn o A new program can be selected and JAI Nom started after Program cancel is activated Z in order to change the drying program Ltitl To cancel any selected programme 2 0 Teal Press Start Pause Cancel button for l 7 a A a D j about 3 seconds Lint filter cleaning and an 7 7 Water tank warning symbols light up and End label appears on the screen as a reminder at the end of this period A As the inside of the machine will be excessively hot when you cancel the program while the machine is running activate the ventilation program to cool it down mcr ILILILI z To pin 2 xt A If
26. r the programme is over This programme rotates the laundry in 600 second intervals to prevent creasing Press Anti creasing button to activate Anti creasing is activated but the programme is running in the first exemplary figure Drying is over and the first step of anti creasing has started in the second figure Changing the contrast Contrast can be adjusted in order to make the symbols on the display appear clearer It may particularly be necessary to change the contrast setting of the display when the dryer is installed over a washing machine press and Press and hold the Spin Speed Time button for 3 seconds When the contrast is changed at the end of 3 seconds all symbols on the display will become visible for 3 seconds in order to indicate that the process is complete Perform the same procedure to revert back to the previous contrast setting Warning indicators Warning indicators may differ according to the model of your machine Filter cleaning ejoj To TT ef A warning symbol will appear to remind filter cleaning after the programme finishes E f the filter cleaning symbol flashes continuously please refer to Suggested solutions for problems Water tank pem A warning symbol will turn on at the end of the programme or when the tank is full with water The machine stops operating if the warning symbol turns on when a programme is running To restart the machine please drain the
27. s between 5 C and 35 C Do not use electrical devices in the product Do not connect the air exit of the product to the chimney holes which are used for the exhaust fumes of the devices operating with gas or other types of fuel You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect Always clean the lint filter before or after each loading Never operate your dryer without the lint filter installed Do not allow fibre dust and dirt accumulation around the exhaust exit and at adjacent areas Power cable plug must be within easy reach after installation Do not use extension cords multi plugs 3 EN or adaptors to connect the dryer to power supply in order to decrease the risk of electric shock Do not make any changes on the plug supplied with the product If it is not compatible with the socket have a qualified electrician change the socket with a suitable one Items cleaned or washed with gasoil fuel oil dry laundry solvents and other combustible or explosive materials as well as the items that are contaminated or spotted with such materials should not be dried in the product since they emit flammable or explosive vapor Do not dry items cleaned with industrial chemicals in the dryer Do not dry unwashed items in the dryer Items soiled with cooking oils
28. s with rubber reinforcement and rubber foam pads should not be dried in the dryer Do not use fabric softeners and anti static products unless they are recommended by the manufacturers of the fabric softener or the product Do not dry the underwear reinforced with metal parts in the dryer If these metal reinforcements loosen and break during drying A will damage your dryer aundry for drying Check all laundry items before loading them into the product to make sure that there are no lighters coins metal items needles and etc in their pockets or on any part of them Fabric softeners and similar products must be used in accordance with the instructions of the manufacturer of the relevant products All laundry must be spun at the highest spin speed that your washing machine allows for the laundry type Laundry may be tangled after washing Separate your laundry before placing them into your dryer Sort your laundry according to their types and thicknesses Dry the same type of laundry together E g fine kitchen towels and table cloths dry faster than the thick bath towels A Consider the information in the Programme Selection Table Always start the programme in accordance with the maximum load capacity Adding laundry to the machine more than the level shown in the figure is not recommended Drying performance will degrade when the machine is overloaded Furthermore your dryer and your laundry can be damag
29. t at closed environments for a long time and deodourise unpleasant odours thanks to this programme eTimer programs f rt Lit A it You can select one of the 10 min 20 min 30 min 40 min 50 min 60 min 80 min 100 min 120 min 140 min and 160 min timer programmes to achieve the desired final drying level at low temperatures Programme dries at the selected time regardless of the drying temperature Time display The display shows the time remaining for the programme to complete while a programme is running Time is displayed in hours and minutes as 02 30 The exemplary display image shows the dryer when it is running and child proof lock is active Programme duration may differ from the values in the consumption table subject to the changes in the water hardness and temperature ambient temperature type and amount of laundry auxiliary functions selected and changes in the supply voltage Ue p ooo UW reo Eee A te A 14 EN Programme selection and consumption table Programme table EN Approximate amount of Drying time remaining minutes humidity Spin speed in Capacity washing machine Programs kg a ottons Coloreds Ca pesas 7 100 x00 15 Pe joy om fn Fossa e w s mo oo o o 8000 d o o es a 10200 l o o bas e o ao H wanen s o x50 6 papers 8 1000 x60 60 ynthetics Energy consumpti
30. t the machine is plugged in e The loading door may be ajar Make sure that the loading door is properly closed e Programme might have not been set or the Start Pause Cancel button might have not been pressed Make sure that the programme has been set and it is not in Pause mode e Childproof lock might have been activated Deactivate the childproof lock Programme has been interrupted without any cause e The loading door may be ajar Make sure that the loading door is properly closed e Electricity may be cut off Press Start Pause Cancel button to start the programme Laundry has shrunk become felted or deteriorated e A programme suitable for the laundry type might have not been used Dry only the laundry which is suitable for drying in dryer after checking the labels on your clothes e Select a programme with suitable low temperature for the laundry type to dry your clothes Drum lightning does not come on e Dryer might have not been started by using the On Off button Make sure that the dryer is on e Bulb may have blown Call the authorized service to replace the bulb Final Anti creasing symbol flashes e The 2 hour anti creasing programme to prevent laundry from creasing might have been activated Turn off the dryer and take out the laundry Final Anti creasing symbol is on e Programme has come to an end Turn off the dryer and take out the laundry Water comes out the cover e Clean
31. the entire inner surface of the cover and door gasket Cover opens spontaneously e Push it until you hear that it is closed For products with a condenser Water tank warning symbol is on e Water may be full e Anti creasing programme might be running Drain the water in the tank Filter cleaning symbol is on e Filter might have not been cleaned Clean the cover filter 23 EN Condenser cleaning symbol is on e Filter drawer Condenser might have not been cleaned Clean the filters in the condenser filter drawer under the kick plate A Call an authorised service if the problem persists 24 EN
32. to change the time during the countdown 1 Press Start Pause Cancel button for 3 seconds to cancel the programme Time delay function must be set again for the required time 2 Press Time delay buttons oo oy or to set the desired time delay 3 Press Start Pause Cancel button The Time delay symbol lights up Pause symbol fades Start symbol lights up 4 The in the middle of the displayed time delay will start flashing Canceling the time delay If you want to cancel the time delay countdown and start the programme immediately 1 Press Start Pause Cancel button for 3 seconds to cancel the programme 2 Then press Start Pause Cancel button to start the desired programme Starting the programme 1 Press Start Pause Cancel button to start the programme 2 Start Pause symbol will light up to indicate that the programme has started and symbol between the remaining time will continue flashing Progress of programme 17 A A ay ee ie ee es Wardrobe Anti Extra creasing Iron Ventilation The progress of a running programme is shown through a number of symbols on the screen At the beginning of each programme step the relevant symbol in the series of symbols will light up and thus all symbols will remain lit up at the end of the programme The symbol that is lit up at the far right of the series of symbols indicates the step that is bein
33. utting your life and others lives in danger For malfunctions that cannot be solved by following the information given in the safety instructions Turn off the machine turn off and contact an authorised service agent e Do not stop the dryer before the drying cycle comes to an end unless you will remove all laundry from the dryer fast in order to lay them and dissipate the heat e Remove the door of the drying compartment before decommissioning or disposing of the product e The final step of the drying cycle cool down cycle occurs without applying heat to ensure that the items are left at a temperature that will not damage them e Fabric softeners or similar products should be used as specified by the fabric softener instructions e Underwear that contains metal reinforcements should not be placed in a dryer Damage to the dryer can result if metal reinforcements come loose during drying e Check all garments for forgotten lighters coins metal pieces needles etc before loading e Remove all objects from pockets such as lighters and matches e At times when your dryer is not in use or after the laundry is taken out following the completion of drying process turn off by using the On Off button In cases when the On Off button is on while the dryer is energized keep the door of the dryer closed Intended use e This product has been designed for domestic use It should not be used for other purposes
Download Pdf Manuals
Related Search