Panasonic SC-HTB10
Contents
1. Assembling the unit Go nnections AEA Connection t0 a TV Linsensasvnundaspaseresan needed ia e a a a a aaaea aiia Connection from an HDMI compatible device AC mains lead connection srsti dn iae e p a aE eiaa Ke E ioia date Using this unit ne AUdlo ffettS une The various audio effects 0 esscstceseeeseseeesceonsntenseeeceesoesuresenscesceseasaeseceotsesenseeneenenensenssensteat Changing the audio effects Linked operations with the TV VIERA Link HDAVI Control 14 Specifications 15 Audio information 15 Troubleshooting NEEE AAR EE kaken AEA 16 Remote control es aat 17 Using the IR Blaster alee ae en br alae 18 Caution for AC Mains Lead 19 i Installation Instructions Safety Precautions 2 cccccccsecsccessccecececscuecteecsceedeceessecceceevecseeececeseseeecusesecceecueesseaeey y 202. 18 6 4 HDMI AV OUT terminal 10 Remote control KRW 1 4 2 5 CLEAR MODE SOUND DIALOG EFFECT 3 7 8 Turn this unit on or off gt 12 Select the source gt 12 TV Select the TV as the source BD DVD Select the device connected to the HDMI AV IN terminal as the source Turn Clear mode Dialog on or off 13 Adjust the Subwoofer level of this unit Adjust the Volume of this unit Mute the sound Turn Dolby Virtual Speaker on or off amp 13 Turn Sound Effect on or off 13 CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer s instructions Remove the insulation sheet before using TS E To replace button type battery CD SS by Fey While pressing the stopper pull out the battery holder Set the button type battery with its mark facing upward and then put the battery holder back in place e When the button type battery runs down replace it with a new battery part number CR2025 The battery should normally last about 1 year however this depends on how frequently the unit is used e Do not heat or expose to flame Do not leave the battery ies in an automobile exposed to direct sunlight for a long period of time with doors and windows closed Warning Keep the Button Type b
3. TV Audio Set TV Audio to ARC Off Set TV Audio to ARC Off only when using an optical digital audio cable with an ARC compatible TV gt 16 Sound Press and hold INPUT SELECTOR on this unit and TV on the remote control for more than 2 sec Set TV Audio to Auto Press and hold INPUT SELECTOR on this unit and CLEAR MODE DIALOG on the remote control for more than 2 sec Remote control code When other Panasonic products respond to this unit s remote control change the remote control code on this unit and the remote control Preparation Turn off all other Panasonic products Turn on this unit Change the remote control to code 2 Aim the remote control at this unit s remote control sensor Press and hold CLEAR MODE DIALOG and BD DVD on the remote control for more than 4 sec Operating Instructions will blink green once when the code of this unit is changed LE If the unit does not operate after changing the code repeat steps To change the remote control to code 1 repeat the steps above but replace BD DVD with TV Using the IR Blaster With the IR Blaster connection it is possible to send the IR signal received by this unit s remote control signal sensor to the TV s sensor Use the TV s remote control within this unit s remote control signal sensor s operation range e For the operation range
4. Components 22 Installation 22 Attaching the wall mount brackets 22 Connections Placement Attaching this unit to a Wall A a 24 These operation instructions are applicable to model SC HTB10 for variety of regions Unless otherwise indicated illustrations in these operating instructions are of the model for Continental Europe Australia and New Zealand Operations in these instructions are described mainly with the remote control but you can perform the operations on this unit if the controls are the same Some accessories and external devices mentioned in these operating instructions that are not supplied with this product may not be for sale in certain regions Accessories Check the supplied accessories before using this unit 1 Remote control 2 Wall mount brackets 2 Screws Built in battery N2QAYC000027 P 9 Australia New Zealand Others 2 Lock pins Product numbers correct as of April 2010 These may be subject to change Unit care Clean this unit with a
5. Foreign matter Do not let metal objects fall inside the unit This can cause electric shock or malfunction Do not let liquids get into the unit This can cause electric shock or malfunction If this occurs immediately disconnect the unit from the power supply and contact your dealer Do not spray insecticides onto or into the unit They contain flammable gases which can ignite if sprayed into the unit Service Do not attempt to repair this unit by yourself If sound is interrupted indicators fail to light smoke appears or any other problem that is not covered in these instructions occurs disconnect the AC mains lead and contact your dealer or an authorised service center Electric shock or damage to the unit can occur if the unit is repaired disassembled or reconstructed by unqualified persons Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time Operating Instructions TABLE OF CONTENTS Operating Instructions Safety precautions 2 mildnet 3 TE Me 3 ACcessorles 5 Unit 5 Control reference guide rrnnnnnnnvnnnnnnnnnnvnnnnnnnnnvnennnnnnnvnennnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnn 6 This unit dus dia 6 This unit Rear Remote control Placement 2
6. Wall 2 I 5 0mmto 6 0 mm e Take care when fixing this unit to the wall Always ensure that there are no electrical cables or pipes in the wall before hanging this unit Keep the screws out of reach of children to prevent swallowing CJ Be sure to use commercially available screws with nominal diameter of 4 0 mm suited to the wall surface material wood steel frame concrete etc and also capable of supporting over 20 kg each for attaching this unit to the wall The position the wall where the screw is to be attached should be capable of supporting over 20 kg Improper attachment may result in damage to the wall and this unit 9 Mount the unit securely onto the screws Q Move this unit so that the screw is in this position LE Be sure that both the wall mount brackets are securely attached to the screws f this unit is tilting forward remove this unit from the screws and adjust by tightening the screws Rear of this unit Lock pin supplied Screw not supplied Be sure to attach both lock pins correctly 11 Attach the cord to a wall with a screw not supplied Keep the screws out of reach of children to prevent swallowing Check the strength of the installation location The position the wall where the screw is to be attached should be capable of supporting over 20 kg If the strength a
7. TO OVERHEATING ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS DO NOT OBSTRUCT THE UNIT S VENTILATION OPENINGS WITH NEWSPAPERS TABLECLOTHS CURTAINS AND SIMILAR ITEMS DO NOT PLACE SOURCES OF NAKED FLAMES SUCH AS LIGHTED CANDLES ON THE UNIT e DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER Warning Risk of fire explosion and burns Do not recharge disassemble heat above 60 C or incinerate The socket outlet shall be installed near the equipment and easily accessible The mains plug of the power supply cord shall remain readily operable To completely disconnect this apparatus from the AC Mains disconnect the power supply cord plug from AC receptacle Continental Europe Australia and New Zealand THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES Others THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES This product may receive radio interference caused by mobile telephones during use If such interference is apparent please increase separation between the product and the mobile telephone For Asia and Africa CAUTION The AC voltage is different according to the area Be sure to set the proper voltage in your area before use For details please refer to page 11 Safety precautions Placement Set the unit up on an even surface away from direct sunlight high temperatures high humidity and excessive vibration These conditions can damage the
8. audio cable the setting of this unit must be changed to specify the audio input terminal right TV Audio Audio is output from the TV speakers and not this unit s When connected to a VIERA Link HDAVI Control compatible TV change the audio output settings to this unit gt 14 Both main and secondary audio are output simultaneously Change the digital audio output setting on the TV or connected device and then select the desired audio channel For details refer to the operating instructions for the TV or connected device Changing this unit s settings Refer to Troubleshooting gt 16 before changing any of the following settings The settings remain intact even if you switch the unit to standby mode will blink green once when the setting is changed E VIERA Link Changes to this setting become effective after turning off and on all the connected devices Set VIERA Link to Off Set VIERA Link to Off when you do not want to use HDAVI Control 16 General operation Press and hold INPUT SELECTOR on this unit and BD DVD on the remote control for more than 2 sec e When set to the ARC function is not available Be sure to connect using the optical digital audio cable 10 Set VIERA Link to On Press and hold INPUT SELECTOR on this unit and SOUND EFFECT on the remote control for more than 2 sec
9. differ according to the type of AC mains plug figures A and B Confirm the AC mains plug fitted and follow the instructions below Illustrations may differ from actual AC mains plug 1 Open the fuse cover with a screwdriver Figure A Figure Fuse cover 2 Replace the fuse and close or attach the fuse cover Figure A Figure B Fuse 5 ampere Fuse 5 ampere Operating Instructions Installation Instructions Home Theater Audio System Model No SC HTB10 Safety Precautions WARNING Ensure that the installation location is strong enough to support long term use f its strength becomes insufficient over the course of long term use the unit may drop possibly causing injury The installation work should never be done by any other than a qualified installation specialist Incorrect installation may cause equipment to fall and personal injury may result Include a safety factor when considering the strength of the proposed installation location approx 10 times the product weight If strength is not sufficient the equipment may fall and personal injury may result Do not install at a location that cannot bear the load f the installation location lacks sufficient strength the equipment may fall Do not modify the wall mount brackets Otherwise the unit may fall and become damaged and personal injury may result Install the unit by taking only
10. has not been removed Remove the insulation sheet gt 7 The remote control and this unit are using different codes Change the code on the remote control gt 17 It may be necessary to set the code of the remote control again after changing the battery of the remote control gt 17 This unit does not operate correctly f the HDMI cable is connected to the wrong terminal HDMI AV IN or HDMI AV OUT this unit will not operate correctly Turn this unit off disconnect the AC mains lead and reconnect the HDMI cable s 10 When operating the connected device this unit reacts in an unwanted manner HDAVI Control commands may use a different signal depending on the make of the device In this case set VIERA Link to Off gt 17 VIERA Link VIERA Link related operations no longer function properly Check the VIERA Link setting on the connected devices When the HDMI connections are changed after a power failure or after the AC mains lead has been removed VIERA Link operations may not function properly Power No power Insert the AC mains lead securely gt 11 e After turning this unit on if the TV BD DVD indicator or the IAO D DTS indicator blinks and this unit immediately turns off unplug the AC mains lead and consult your dealer Power of this unit is turned off when the input for the TV is changed This is a normal featur
11. refer to page 6 1 2 Connect the jack plug to this unit s Ir SYSTEM terminal Place the infrared emitter in sight of the TV s Ir SYSTEM remote control signal sensor For the location of the TV s remote control signal sensor refer to the operating instructions for the TV Aim the TV s remote control at this unit s remote control sensor and operate the TV PE e For the location of this unit s remote control signal sensor refer to page 6 Infrared emitter e Make sure to clean the surface where the adhesive tape is to be attached e If you peel off the adhesive tape the surface may become damaged and exposed adhesive may remain Once you have confirmed the TV is operating correctly secure it by attaching the adhesive tape The supplied IR Blaster is only compatible with Panasonic TVs Placement example On the rear of this unit TV remote control signal sensor Adhesive tape Caution for AC Mains For Saudi Arabia and Kuwait For your safety please read the following text carefully This appliance is supplied with a moulded three pin mains plug for your safety and convenience A 5 ampere fuse is fitted in this plug Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 ampere and that it is approved by ASTA or BSI to BS1362 Check for the ASTA mark or the BSI mark on the body of the fuse If the plug contains a remo
12. soft dry cloth e Never use alcohol paint thinner or benzine to clean this unit Before using chemically treated cloth carefully read the instructions that came with the cloth Operating Instructions To dispose or transfer this unit If you discard this unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings gt 16 To return to the factory preset Control reference guide This unit Front 1 Standby on switch 00 1 Sound Effect indicator _ Press to switch the unit from on to standby Dolby Virtual Speaker indicator Audio format indicator mode or vice versa In standby mode the unit is still consuming a small amount of power Remote control operation range 2 Adjust the Volume of this unit p 9 Distance 3 Select source Within approx 7 TV lt gt BD DVD Angle 4 LED status indicators 12 13 5 F Approx 10 up and 30 down 30 left and Clear mode Dialog indicator right This unit Rear For Asia Ir SYSTEM and Africa Dm AV OUT TO TV ARC OPTICAL DIGITAL AUDIO IN TV ONLY Homi AV IN BD DVD PU 2 ACIN 1 AC Voltage selector gt 11 5 OPTICAL DIGITAL AUDIO IN terminal 10 2 AC IN terminal 11 6 HDMI AV IN terminal 11 3 Ir SYSTEM terminal Only for use with the supplied IR Blaster
13. the steps which are specified in these instructions Do not install it in any other way Otherwise the unit may drop and become damaged and personal injury may result Do not install at a location other than a vertical wall Otherwise the unit may drop and become damaged and personal injury may result CAUTION Do not install at any locations subject to humidity dust smoke steam or heat or under an air conditioner where water may drip onto the unit This may have an adverse effect on the unit and cause fire or electric shock Leave a clearance between the rear panel and the wall The unit has air ventilation holes at the front and rear Covering these may result in fire Install the mounting screws and power cable in such a way that they will not make contact with metal objects or wiring inside the wall Electric shocks may result from contact with any metal objects inside the wall For installation use the special purpose constituent parts Otherwise the unit may fall off the wall and personal injury may result When removing this unit remove the wall mounting screws as well Otherwise the mounting screws may get caught and personal injury may result To operate this unit safely install it at an appropriate height Otherwise the unit may fall and personal injury may result WARNING PROFESSIONAL INSTALLATION IS REQUIRED PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND OR SERIOUS INJURY INCLUDING
14. DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING Requests regarding handling Exercise care when selecting the location for the unit because it may discolour or deform due to light or heat if it is placed where it is exposed to direct sunlight or near a heater Clean the wall mount brackets by wiping them with a soft dry cloth such as cotton or flannel If the wall mount brackets are very dirty remove the dirt using a neutral detergent diluted in water and then wipe them clean with a dry cloth Do not use benzine thinner or furniture wax as this may cause the coating to peel For information on cleaning the unit see the unit s instruction manual gt 5 If using a chemically treated cloth follow the instructions supplied with the cloth Precautions for wall mount bracket installation The wall mount brackets are for use in attaching the unit to a vertical wall Do not attach to any surface other than a vertical wall To ensure correct unit performance and prevent trouble do not install at any of the following locations Near sprinklers or fire smoke detectors Where there is a risk of exposure to vibration or impact Near high voltage wires or dynamic power supplies Near sources of magnetism heat water vapour or soot Locations exposed to air blown from heating equipment Where droplets of condensation from an air conditioner or other unit may form Attach using techniques suited to th
15. I Control compatible equipment This standard is compatible with Panasonic s conventional HDAVI equipment Please refer to individual manuals for other manufacturers equipment supporting VIERA Link function Speaker Selection You can select whether audio output is from this unit or the TV speakers by using the TV menu settings Home Cinema This unit s speakers are active When this unit is in standby mode changing the TV speakers to this unit in the TV menu will automatically turn this unit on and select TV as the source You can control the volume setting using the Volume or Mute button on the TV remote control If you turn off this unit TV speakers will be automatically activated TV TV speakers are active The volume of this unit is set to its minimum LE When switching between this unit s speakers and TV speakers the TV screen may be blank for several seconds Automatic input switching When the following operations are performed this unit will automatically turn on and change the input channel to the corresponding source When play starts an HDMI connected device When the input channel on the TV is changed Only when speaker output is set to this unit EI f Power off link is activated on the TV this unit will turn off when the TV is turned off Automatic lip sync function for HDAVI Control 3 or later Delay between audio and video is automaticall
16. Panasonic Operating Instructions Home Theater Audio System Model No SC HTB10 Dear customer Thank you for purchasing this product For optimum performance and safety please read these instructions carefully Before connecting operating or adjusting this product please read the instructions completely Please keep this manual for future reference The illustrations shown may differ from your unit Included Installation Instructions The installation should never be done by any other than a qualified installation specialist Before commencing work carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly Please keep these instructions You may need them when maintaining or moving this unit HOM viet Link EGIIGN GS RQTX1160 1B WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PRODUCT DAMAGE e DO NOT EXPOSE THIS APPARATUS TO RAIN MOISTURE DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS e USE ONLY THE RECOMMENDED ACCESSORIES DO NOT REMOVE THE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION e DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE BUILT IN CABINET OR IN ANOTHER CONFINED SPACE ENSURE THE UNIT IS WELL VENTILATED TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE
17. TET e DETTE APPARATET M IKKE UTSETTES FOR REGN FUKTIGHET DRYPP ELLER SPRUT OG INGEN V SKEFYLTE GJENSTANDER SOM F EKS VASER MA PLASSERES PA APPARATET e BRUK KUN ANBEFALT TILBEH R e IKKE FJERN DEKSELET ELLER BAKSIDEN APPARATET INNEHOLDER INGEN DELER SOM KAN SKIFTES ELLER REPARERES AV BRUKEREN OVERLAT TIL KVALIFISERTE SERVICETEKNIKERE UTF RE SERVICE ADVARSEL e APPARATET M IKKE PLASSERES I EN BOKHYLLE ET INNEBYGGET KABINETT ELLER ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE S RG FOR AT GARDINER ELLER LIGNENDE IKKE FORVERRER VENTILASJONSFORHOLDENE S RISIKO FOR ELEKTRISK SJOKK ELLER BRANN FOR RSAKET AV OVERHETING UNNG S e APPARATETS VENTILASJONS PNINGER M IKKE DEKKES TIL MED AVISER BORDDUKER GARDINER OG LIGNENDE e PLASSER IKKE PEN ILD SLIK SOM LEVENDE LYS OPP APPARATET BRUKTE BATTERIER M KASSERES UTEN FARE FOR MILJ ET Pistorasia tulee asentaa laitteen l helle helppop syiseen paikkaan Verkkojohdon pistokkeen on oltava aina helposti k ytett viss laite voidaan kytke kokonaan irti verkkovirrasta irrottamalla verkkojohdon pistoke pistorasiasta DETTE APPARATET ER BEREGNET TIL BRUK UNDER MODERATE KLIMAFORHOLD Str muttaket m befinne seg i n rheten av utstyret og v re lett tilgjengelig St pslet p str mkabelen m v re klart til bruk N r dette apparatet skal kobles helt fra str mnettet AC m s
18. V 8 For the optimal HDAVI Control operations change the following settings on the connected TV Set the default speaker settings to this unit Set the speaker selection settings to this unit Set the digital audio output settings to be compatible with this unit gt 15 Turn on all HDAVI Control compatible equipment and select this unit s input channel on the connected TV so that the HDAVI Control function works properly Start playback on the device connected to the HDMI AV IN terminal and check that the image is displayed correctly When the connection or settings are changed repeat this procedure x1 The availability and function of the settings may vary depending on the TV Refer to the operating instructions for the TV for details x2 If the TV has a default speaker setting within the VIERA Link setting items choosing this unit as the default speaker will automatically change the speaker selection to this unit EI VIERA Link HDAVI Control based on the control functions provided by HDMI which is an industry standard known as HDMI CEC Consumer Electronics Control is a unique function that we have developed and added As such its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed This unit supports HDAVI Control 5 function HDAVI Control 5 is the newest standard current as of December 2009 for Panasonic s HDAV
19. attery out of the reach of Operating Instructions children Never put Button Type battery in mouth If swallowed call your doctor Placement Caution This unit and the supplied wall mount brackets are to be used only as indicated in these operating instructions or the installation instructions Failure to do so may lead to damage to the amplifier and or the speakers and may result in the risk of fire Consult a qualified service person if damage has occurred or if you experience a sudden change in performance Do not attempt to attach this unit to a wall using methods other than those described in this manual How you place this unit can affect the bass and the sound field Place this unit near the TV This unit should be placed parallel to the seating position E g On the wall In a 2 3 On a 2345 To attach this unit to the wall refer to the installation instructions gt 20 Installation work should never be done by any other than a qualified installation specialist x1 Place this unit on a flat secure base Do not place this unit on the TV s pedestal x2 allow for proper ventilation and to allow for proper air flow around this unit position it with at least 5 mm of space on all sides of this unit x3 Secure the unit to prevent it from falling 9 x4 Do not place this unit in front of 30 compatible TV This unit may block the transmitter for the 3D eyewear x5 Do no
20. cabinet and other components thereby shortening the unit s service life Do not place heavy items on the unit Voltage Do not use high voltage power sources This can overload the unit and cause a fire Do not use a DC power source Check the source carefully when setting the unit up on a ship or other places where DC is used AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged Poor connection and lead damage can cause fire or electric shock Do not pull bend or place heavy items on the lead Grasp the plug firmly when unplugging the lead Pulling the AC mains lead can cause electric shock Do not handle the plug with wet hands This can cause electric shock Licenses Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent 5 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS Digital Surround and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc All Rights Reserved HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HDAVI Control is a trademark of Panasonic Corporation
21. e effect on the remote control Clear mode Dialog Sound Effect Dolby Virtual Speaker IVS 2 The status of the selected effect is indicated for 4 sec Clear mode Dialog Sound Effect Dolby Virtual Speaker QAVS On The indicator lights Off The indicator blinks 3 While the indicator is lit or blinking press the same button again to change the setting Operating Instructions EI When turning the audio effects on or off there might be a slight pause in the audio This is normal Dolby Virtual Speaker EX VS is also turned on when Sound Effect is turned on It will remain on even after Sound Effect is turned off If Dolby Virtual Speaker 00 5 is turned off while Sound Effect is on the Sound Effect will also be turned off The audio format is also indicated when X VS is pressed gt 12 Linked operations with the TV VIERA Link HDAVI Control What is VIERA Link HDAVI Control VIERA Link HDAVI Control is a convenient function that offers linked operations of this unit and a Panasonic TV VIERA under HDAVI Control You can use this function by connecting the equipment with an HDMI cable See the operating instructions for connected equipment for operational details Preparation Set VIERA Link to The default setting is Set the HDAVI Control operations on the connected equipment e g T
22. e structure and materials of the installation location Spread a soft blanket or cloth over the floor so that the unit and floor will not be marked or scratched during the assembly and installation work When screwing down the parts ensure that the screws are neither insufficiently tightened nor over tightened Take sufficient care to ensure safety around you when performing the assembly and installation work or while moving about during the course of the work Do not install the unit underneath ceiling lamps spotlights halogen lamps etc Otherwise the cabinet may be bent or damaged by high heat Do not connect this unit to the household mains socket while installing When screwing down the parts ensure that the screws are not insufficiently tightened or over tightened Installation Instructions Components The images shown in this installation instructions are for illustrative purpose only Check the supplied components before starting 2 Wall mount brackets 2 Screws 2 Lock pins N AC mains lead Australia and New Zealand Saudi Arabia and Kuwait Others Commercially available components not supplied Screws for wall mounting Screws to attach fall prevention cord to wall Fall prevention cord e Use commercially available screws with a nominal diameter of 4 0 mm that are suited to the wall ma
23. e when using VIERA Link HDAVI Control 4 or later For details please read the operating instructions for the TV Sound No sound or image Turn muting off 12 e Check the connections to the other devices 10 Check the audio output settings on the connected device Turn this unit off and then on again When connected to ARC compatible TV check if the TV s connected terminal is ARC compatible If the connections are correct there might be a problem with the cables Reconnect the unit with different cables When using the optical digital audio cable this system is not able to play audio with a sampling frequency greater than 48 kHz Sound is not heard when playing DVD Audio This may occur due to digital copyright protection of the disc when using the optical digital audio cable This system is not able to play audio with a sampling frequency greater than 48 kHz If the XJD DTS indicator is blinking unplug the AC mains lead and consult your dealer If the TV BD DVD indicator is blinking try the following to correct the problem Consult your dealer if the problem persists e Turn the connected device off and on again e Turn this unit off and reconnect the HDMI cables and then turn this unit on again If this unit is connected to a non Panasonic ARC compatible TV connect using an optical digital audio cable 10 e After connecting the optical digital
24. h Speed HDMI Cables that have the HDMI logo as shown on the cover It is recommended that you use Panasonic s HDMI cable Recommended part number RP CDHS15 1 5 m RP CDHS30 3 0 m RP CDHS50 5 0 m etc Non HDMI compliant cables cannot be utilised OPTICAL IN Connect the optical digital audio cable if the TV is not ARC compatible gt below Basic connection with an ARC compatible TV ARC Audio Return Channel Available only when using an ARC compatible TV With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cable Refer to the operating instructions of the TV for the settings to output digital audio HDMI cable not supplied sure to connect to the TV s ARC compatible terminal Refer to the operating instructions for the TV EI If the connected TV is ARC compatible but audio is not output to this unit connect using the optical digital audio cable gt right Basic connection with an optical digital audio cable compatible TV Basic connection with an optical digital audio cable compatible TV TV lt OPTICAL J OUT a DIGITAL AUDIO IN HDMI cable not supplied Optical digital audio cable not supplied Lt When connected to an ARC compatible TV set TV A
25. it from the household mains socket e The supplied AC mains lead is for use with this unit only Do not use it with other equipment Also do not use cords for other equipment with this unit 11 Using this unit Preparation Turn on the TV If VIERA Link is activated on both the connected TV and this unit make sure to change the TV s settings for this unit gt 14 Linked operations with the TV VIERA Link HDAVI Control If VIERA Link is not activated or if the TV is not compatible with VIERA Link reduce the volume of the TV to its minimum INPUT selector SUBWOOFER VOL rm 1 Press to turn on this unit e The current status audio source active audio effects and audio format is displayed The audio effects and audio format indicator will turn off after 4 sec 2 Press TV or BD DVD to select the audio source gt right e f you have selected BD DVD make sure to select the TV s input channel for this unit and start the playback Before turning off this unit be sure to reduce the volume e Even if this unit is turned off the device connected to the HDMI AV IN terminal will continue to output audio or video to the TV eT BD DVD Audio source indicator The selected audio source is indicated Green When the TV is the audio source Red When the device connected to the HDMI AV IN terminal is the audio source To adjust the volume subwoofe
26. method of disposal Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved Information on Disposal in other Countries outside the European Union EU Panasonic Corporation Web Site http panasonic net EU Pursuant to at the directive 2004 108 EC article 9 2 Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15 22525 Hamburg Germany Panasonic Corporation 2010 RQTX1160 1B i F0510SA1060
27. ng 1 On the rear of the unit Place the wall mount bracket by aligning the holes in the wall mount bracket with the projecting parts 2 Screw the wall mount bracket firmly into place Screw tightening torque 80 Necm to 120 Necm Repeat the steps above when installing the second wall mount bracket 3 Thread a cord not supplied through each wall mount bracket Make sure to use a cord which is capable of Rear of this unit supporting over 20 kg Fall prevention cord not supplied Q 4 After all the necessary connections are finished gt 10 Place the unit in the desired position and attach each cord onto the rack or table Attach each cord to a different screw eye E g Make sure that there is no more than a cm slack This unit Fall prevention cord not supplied Rack or table Screw eye not supplied e Attach at a position capable of supporting over 20 kg Operating Instructions Connections Turn off all equipment before connection and read the appropriate operating instructions Do not connect the AC mains lead until all other connections are complete C Compatible with FULL HD 3D TV and Blu ray Player This unit can pass through the 3D signal from 3D compatible Blu ray Player to a FULL HD 3D TV p Connection to a TV HDMI The HDMI connection supports VIERA Link HDAVI Control gt 14 when used with compatible Panasonic TV e Use Hig
28. nit to the wall Be sure that there is enough space above the unit and that the screw hole positions are level with each other before drilling into the wall Be sure to use a spirit level to ensure that both screwing positions horizontal to each other 5 Checking the strength of the installation location Check the wall strength at the 2 screwing positions If the strength at any of these positions is lacking provide sufficient reinforcement The position in the wall where the screw is to be attached should be capable of supporting over 20 kg Installation Instructions Attaching this unit to a wall 6 Thread a cord not supplied through the wall mount bracket e Use a cord which is capable of supporting over 20 kg Rear of this unit Fall prevention cord not supplied 7 Attach the lock pins into the wall mount bracket e The lock pins are designed to lock the wall mount brackets to the screws that this unit is attached to Hence preventing this unit from falling off the screws e Keep the lock pins out of reach of children to prevent swallowing Insert the lock pins as illustrated in the image below e Make sure that the lock pin does not get caught on the fall prevention cord Q a Do not insert the lock pin farther than this point 8 Drive 2 screws not supplied into the screwing positions identified in step 4 Atleast 30 mm Aa 24 0 mm to 27 8 mm to 29 4 mm ZK
29. nput connector HDMI AV output Output connector Digital Audio Input TV only Optical digital input Optical terminal Sampling frequency 32 kHz 44 1 kHz 48 kHz Audio Format LPCM Dolby Digital IR Blaster Terminal 1 Type A 19 pin Type A 19 pin 3 5 mm jack 1 Specifications are subject to change without notice Mass and dimensions are approximate 2 Total harmonic distortion is measured by a digital spectrum analyzer Audio information Compatible audio formats This unit is compatible with the following formats Dolby Digital DTS Digital Surround 2 channel LPCM and multi channel LPCM When using the optical digital audio cable this system is not able to play audio with a sampling frequency greater than 48 kHz Sound Effect and Dolby Virtual Speaker will be automatically cancelled if the audio signal s sampling frequency is greater than 48 kHz Operating Instructions Troubleshooting Before requesting service make the following checks If you are in doubt about some of the check points or if the solutions indicated in the following guide do not solve the problem consult your dealer for instructions General operation To return to the factory preset While this unit is on press I on this unit for more than 4 sec All the indicators will blink twice when the unit is reset The remote control doesn t work properly It is possible that the insulation sheet
30. r level Press VOL to adjust the volume of the speakers Press SUBWOOFER to adjust the subwoofer level The indicators blink from left to right or from right to left e The indicators will not blink when it has reached the maximum or minimum To mute the sound Press MUTE The indicators blink simultaneously while muting To cancel press the button again or adjust the volume e Muting is cancelled if this unit is turned off Audio format indicator Press X VS to indicate the audio format The current audio format is indicated for 4 sec Green Dolby Digital Red DTS Off PCM or LPCM EI e The audio format status is also indicated for 4 sec if the audio format on the selected source TV Blu ray Disc DVD Player etc is changed The Dolby Virtual Speaker QAVS audio effect status is also indicated gt 13 Audio effects GD p ap CLEAR MODE SOUND EFFECT DOVS The various audio effects Clear mode Dialog You can make the dialogue stand out from the background noise and also hear sound as if it is coming from the centre of the TV Sound Effect You can enjoy a dynamic sound with a natural expansion Dolby Virtual Speaker You can enjoy a surround sound effect similar to 5 1 ch Dolby Digital or DTS with any audio source CLEARMODE SOUND TVS DIALOG EFFECT Changing the audio effects 1 Press the button for the respectiv
31. t pslet p str mkabelen trekkes ut av stikkontakten Installation Instructions Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC Sj By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the European Union If you wish to discard electrical and electronic equipment please contact your dealer or supplier for further information These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct
32. t any of these positions is lacking provide sufficient reinforcement Installation Instructions Rear of this unit Fall prevention cord not supplied Screw eye not supplied SUOMI VAROITUS VAHENNA TULIPALON SAHKOISKUN TAI LAITTEISTON VAHINGOITTUMISEN VAARAA LAITETTA EI SAA ALTISTAA SATEELLE KOSTEUDELLE ROISKEILLE TAI TIPPUVILLE NESTEILLE LAITTEEN PAALLE EI SAA MY SK N ASETTAA MIT N NESTEELL T YTETTY ESINETT KUTEN MALJAKKOA e K YT VAIN SUOSITELTUJA LIS VARUSTEITA e L IRROTA KANTTA TAI TAUSTAA SIS LL El OLE K YTT J N HUOLLETTAVISSA OLEVIA OSIA HUOLLON SAA SUORITTAA VAIN AMMATTITAITOINEN HENKIL KUNTA VAROITUS e L ASENNA TAI LAITA T T LAITETTA KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN SULJETTUUN TILAAN JOTTA TUULETUS ONNISTUISI VARMISTA ETT VERHO TAI MIK N MUU MATERIAALI EI HUONONNA TUULETUSTA JOTTA V LTETT ISIIN YLIKUUMENEMISESTA JOHTUVA S HK ISKU TAI TULIPALOVAARA e L PEIT LAITTEEN TUULETUSAUKKOJA SANOMALEHDELL P YT LIINALLA VERHOLLA TAI MUULLA VASTAAVALLA ESINEELL e L ASETA PALAVAA KYNTTIL TAI MUUTA AVOTULEN L HDETT LAITTEEN P LLE e H VIT PARISTOT LUONTOA VAHINGOITTAMATTOMALLA TAVALLA T M LAITE ON TARKOITETTU K YTETT V KSI LEUDOSSA ILMASTOSSA NORSK ADVARSEL F LG NEDENST ENDE INSTRUKSER FOR REDUSERE RISIKOEN FOR BRANN ELEKTRISK ST T OG SKADE P PRODUK
33. t place this unit too close to the TV This unit may interfere with the TV s various sensors ambient light etc L You can damage the speakers and shorten their useful life if you play sound at high levels over extended periods Placing this unit too close to the floor walls and corners can result in excessive bass Cover walls and windows with thick curtains Ifthe TV s remote control sensor is E If irregular colouring occurs on your blocked by this unit TV turn the TV off for about Try using the TV s remote control from a different 30 minutes angle If the problem persists you can use the If it persists move this unit further away from the supplied IR Blaster to relay the signal to the TV TV 18 e Do not use the IR Blaster if the TV s remote control sensor is not blocked by this unit Assembling the unit Refer to the following when placing this unit on a table or in a rack For wall mount refer to the installation instructions gt 20 Professional installation is required The installation should never be done by any other than a qualified installation specialist Preparation To prevent damage or scratches lay down a soft cloth and perform the assembly on it Keep the screws out of reach of children to prevent swallowing EI Do not hold this unit in one hand to avoid injury by dropping this unit when carrying To prevent the unit from falli
34. terial wood steel frame concrete etc you are attaching the wall mount brackets to Product numbers correct as of April 2010 These may be subject to change Installation procedure Never use any other method than specified to install Attaching the wall mount brackets Preparation To prevent damage or scratches lay down a soft Keep the screws out of reach of children to cloth and perform the assembly on it prevent swallowing L Do not hold this unit in one hand to avoid injury by dropping this unit when carrying 1 On the rear of the unit Place the wall mount bracket by aligning the holes in the wall mount bracket with the projecting parts 2 Screw the wall mount bracket firmly into place Screw tightening torque 80 Necm to 120 Necm Repeat the steps above when installing the second wall mount bracket p Connections 3 Complete all the necessary connections to this unit gt 10 Connect the AC mains lead to this unit but do not connect it to the household mains socket until the installation is completed EI e For details refer to the operating instructions for this unit p Placement 4 Use the measurements indicated below to identify the screwing positions on the wall 36mm 108 5 mm 72mm 583 mm EI Position the unit with at least 20 mm of space above the unit and 100 mm on either side of the unit If not it will not be possible to attach the u
35. udio to ARC Off to output the audio signal from the optical digital audio cable gt 17 TV Audio Connection from an HDMI compatible device You can output the audio signal from the connected HDMI compatible Blu ray player DVD player etc with this unit and pass the signal through to your TV Preparation Connect this unit to the TV 10 E g Blu ray Disc Player mH __ AV OUT HDMI cable not supplied Refer to the operating instructions of the connected HDMI compatible device for the necessary setting to output the video and audio signals AC mains lead connection For Asia and Africa VOLT ADJ Before connecting the AC mains lead 220 240V Set the voltage Use a flat head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used Operating Instructions 110 127V AC mains lead supplied Do not use any other AC mains lead except the supplied one household mains socket For Saudi Arabia and Kuwait BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 19 BEFORE CONNECTION e Connect only after all other connections are complete This unit consumes a small amount of AC power even when it is in standby mode approx 0 2 VW In the interest of power conservation if you will not be using this unit for a long time unplug
36. vable fuse cover you must ensure that it is refitted when the fuse is replaced If you lose the fuse cover the plug must not be used until a replacement cover is obtained A replacement fuse cover can be purchased from your local dealer CAUTION IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET If a new plug is to be fitted please observe the wiring code as stated below If in any doubt please consult a qualified electrician IMPORTANT The wires in this mains lead are coloured in accordance with the following code Blue Neutral Brown Live As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red Lead WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E BY THE EARTH SYMBOL lt OR COLOURED GREEN OR GREEN YELLOW THIS PLUG IS NOT WATERPROOF KEEP DRY Before use Remove the connector cover How to replace the fuse The location of the fuse
37. y adjusted enabling you to enjoy smooth audio for the picture EI The delay information is automatically set if the TV is compatible to VIERA Link HDAVI Control or later and the VIERA Link is set to When the delay information cannot be retrieved the audio delay is set to 40 ms Specifications GENERAL Power consumption 30 W Power consumption in standby mode Approx 0 2 W Power supply Continental Europe Australia and New Zealand AC 220 V to 240 V 50 Hz Others AC 110 V to 127 V 220 V to 240 V 50 60 Hz Dimensions WxHxD Without wall mount bracket 800 mmx 108 mmx58 mm With wall mount bracket 800 mmx 108 mmx80 mm Mass Without wall mount bracket Approx 3 2 kg With wall mount bracket Approx 3 3 kg Operating temperature range 0 C to 40 C Operating humidity range 20 to 80 RH no condensation AMPLIFIER SECTION RMS Output Power Front ch 30 W per channel 4 Q 1 kHz 10 THD Subwoofer ch 30 W per channel 4 Q 100 Hz 10 THD Total RMS Dolby Digital mode power 120 W Except Continental Europe Australia and New Zealand PMPO Output Power 980 W SPEAKER SECTION FRONT SPEAKERS BUILT IN Type 1 way 1 speaker system Bass Reflex Full range 6 5 cm Cone typex2 SUBWOOFER BUILT IN Type 1 way 1 speaker system Bass Reflex x2 Woofer 8 cm Cone typex2 TERMINAL SECTION HDMI This unit supports HDAVI Control 5 function HDMI input I
Download Pdf Manuals
Related Search