Caliber MCD 365
Contents
1. E gt If the audio device is the connectivity or no audio device is connecting with this unit after mode changed to BT AUDIO mode the display will show BT FILI Li and if after 8 20 seconds time out still cannot find any audio device for connecting the unit will display 7 TE TE E for 3 seconds then turn to the Tunner Mode 3 Once in the BT AUDIO mode user can use the audio device to start playback the song via Bluetooth wireless with this unit Eg When mode change to BT AUDIO mode some of the audio device may auto playback the music without operate the music playback operation and some of the device like mobile phone may need to first change into the Media Player mode on the mobile phone otherwise the song cannot be direct playback via Bluetooth wireless If the auto playback not support on the audio device then please refer to the instruction manual of the audio device on how to operate music playback via Bluetooth wireless technology Operating an audio device with this unit AVRCP Audio Video Remote Control Profile This unit can perform the following operations with the connecting Audio device which supports AVRCP Audio Video Remote Control Profile amp only if the Audio device does support AVRCP 1 Start playing Every time when user change mode into BT AUDIO mode this unit will automatically send a PLAY command via AVRCP to the audio device to command the auto start playing song in the audio dev2. off to On If on is selected when the AF search or PI seek it will implement to station which have all the PI codes which are the same as current station If off is selected when AF search or Pl seek the regional code in the format Pl code will be ignored A regional station is possible to be received y The Regional function On Off Setting is valid when the AF function is on Programmable Turn on Volume P VOL This option allows selection of the volume level the radio will automatically assume when first turned on VOL PGM 12 is the default setting which will turn the radio on at the volume level selected when the unit was last turned off To program a specific volume level for the radio to turn on at rotate the volume control to select OLUME LEVEL Within 5 seconds Beep Tone BEEP The beep tone feature allows the selection of an audible beep tone to be heard each time a button is pressed on the face of the radio BEEP TONE On is the default display Rotate the volume control to select the BEEP TONE Off option 8 AUDIO OPERATION Audio Menu Long Press AUDIO button to access the Audio Menu User can navigate thru the Audio Menu items by pressing the AUDIO button repeatedly or by pressing the Tuning Up or Tuning Down Button Once the desired menu item appears on the display adjust that option by using the Volume Up or Down button within 5 seconds The following menu
3. iF is appearing on the LCD Display press the AUDIO button to activate the Pairing mode gt Keep the Mobile Phone within 2 meter from the unit when making the pairing e To terminate the pairing you can press the CLEAR BAND button at any time Select the Blue Tooth set up on the Mobile Phone Please refer to the instruction manual of your Mobile Phone on how to enter into the blue tooth set up and blue tooth on off and blue tooth pairing e BT60 should appear in the pairing list on the Mobile Phone User need to select BT60 and then input the password 1234 e If the pairing is successful the display will show Mobile Phone Name or Model Number e lf the pairing failed FFYIFF FIL will be flashing on the Display for 3 seconds And the unit will switch back to the previous mode automatically E gt During the Pairing only Power Clear Volume amp Mute are functional other function keys are disabled amp non operational during the pairing mode Re Connection Of The Blue Tooth System The unit is with built in Auto Reconnection function In some conditions user need to reconnect manually For example like the following e lf The Mobile Phone is out of range 2 meters away from the Head unit Under the condition of lost connection when the user come back to the unit At the same time there is an incoming call or user is under conversation on the Mobile Phone 2 meters away fr
4. MANAGER my Under transferring mode All the MP3 WMA operation is not functional like file up down Repeat Random and Intro etc E gt The audio will remain recording by the unit system even MUTE function is activated E gt The Transferring will automatically stop if the storage device memory is less than 2MB To Cancel Transferring 1 Long press button COPY again to cancel the recording The LCD will display OTL 77 The music file that has been transferred incompletely will be deleted my The unit will stop the file transfer automatically under the following operation the music file that has been transferred incompletely will be deleted 1 Switch the power to off mode 2 Mode change 3 Inserting a CD Disc 4 Inserting a USB Stick E 20 TRANSFER MP3 OR WMA MUSIC FILES BETWEEN MEDIA DEVICES Select a device by mode button and playback the music file need to be transfer 1 Long press the COPY button to activate the transfer mode 2 The LCD will display gt gt 17 5 5 7 as default Rotate the encoder volume knob to navigate thru I gt gt LIES UI gt gt CARI for selection of the storage media 3 Once selected the storage media Press the AUDIO button as confirmation to transfer the Playing file If no further button is press within a 10 second time out the unit will automatically resume to the previous mode 4 If the unit detect the selected media memory capacity is used up MEM FLL will be displayed on the LCD for
5. TP Traffic program AF Function By pressing AF button lt 3 seconds to select AF ON OFF AF ON or AF OFF will show amp remain on the LCD segment for 5 seconds Under AF On mode if the tuned in station signal is getting weak the unit will automatically switches to a different frequency on the same network with stronger signal Note Factory Default setting is AF ON 2 TA Function By pressing TA button lt 3 seconds turn switch on TA standby mode TA ON will show amp remain on the LCD segment for 5 seconds amp the TA icon will light up on the LCD In the stand by mode when a traffic announcement broadcast starts the traffic announcement broadcast will be received as top priority regardless of the function mode When a traffic announcement starts TRAFFIC INFO will show on the LCD press the TA button can cancelled the broadcast reception while a traffic announcement broadcast is being received The unit will go back to the previous mode and TA goes into stand by mode again When the TP icon is not light up for 60 seconds A beep Alarm tone is heard and the LCD will show Lost TP TA TA seek will automatic activate and searches to another TA station PTY Function Pressing PTY button lt 3 seconds to goes into PTY select mode PTY icon will light up on the LCD The LED around encoder volume will starts blinking The user now has 5 seconds to select the desired PTY item by using volume up d
6. direction label facing upward Compact disc is extremely Clean the disc or try to play a new one dirty or defective disc Temperature inside the car is Cool off or until the ambient temperature too high returns to normal Condensation Leave the player to off for an hour or so then try again No sound Volume is in minimum Adjust volume to a desired level Wiring is not properly Check wiring connection connected The operation keys The built in microcomputer is Press the RESET button do not work not operating properly due to Front panel is not properly fixed into noise its place The installation angle is Adjust the installation angle to less more than 30 degrees than 30 degrees The disc is extremely dirty or a Clean the compact disc or try to play a defective disc new one TE radio Uges Not ee ne Insert the antenna cable firmly work connected The radio station automatic selection The signals are too weak Select a station manually does not work ERROR 1 Mechanism Erroi Press the reset button to correct the problem If the error code does not disappear consult your nearest service dealer Write Error The Media Device not able to Replace the Media Device or copy by the unit Read Error The Media Device not able to Replace the Media Device or play file by the unit The media device memory is Replace the Media device or erase full not allow to copy some un usage files No file Format supports fo
7. from the dashboard You must do this before you install the front panel otherwise it can t be attached DIN REAR MOUNT METHOD B Installation using the screw holes on the sides of the unit Fastening the unit to the factory radio mounting bracket W Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned are fitted and tighten the screws at 2 places on each side Screw Factory radio mounting bracket Dashboard or Console Hook Remove this part Note the mounting box outer trim ring and half sleeve are not used for method B installation 3 DETACHABLE CONTROL PANEL D C P Removing The Detachable Control Panel D C P Se E 1 Turn the power off 2 Press the D C P release button 3 Remove the D C P PANEL RELEASE BUTTON Attaching the DCP 1 Attach the panel at the right side first with point B on the main unit touching point A on the D C P As shown on the diagram 2 Then press the left side of D C P onto the main unit until a click sound is heard CAUTION e DONOT insert the D C P from the left side Doing so may damage it e TheD C P can easily be damaged by shocks After removing it place it in a protective case and be careful not to drop it or subject it to strong shocks e When the release button is pressed and the D C P is unlocked the car s vibrations may cause it to fall To prevent damage t
8. if still not loud enough try to increase your mobile phone s volume Q Under Phone conversation the Listener can hear echo feedback A Your unit s speaker volume level is too loud which cause the voice feedback into the built in microphone this can be corrected by decreasing the volume level Q Under Phone conversation the Listener complain the background is too noisy A May be you are in a noisy environment Try close the car s window to shield the environment background noise under phone conversation Q If the Mobile Phone already paired with the headunit but after several calls the incoming calls cannot access thru the headunit A May be the paired Mobile Phone lost the Bluetooth connection with the headunit in this case please go to the MENU amp select re connect to reconnect the headunit with the paired Mobile Phone For details please refer to the MENU operation re connection E 25 Bluetooth Mobile Phone Compatibility List This unit can support bluetooth specification v1 2 or higher and compatible with bluetooth profiles such as handsfree or headset profiles however the functionality may be limited due to some phones own dedicated interfacing specification This list is only updated to the time this list is being printed This list gives an example of bluetooth mobile phone available on the market if your bluetooth mobile phone is not on the list please try it out in practice or try your phone
9. items can be adjusted as described above The unit will automatically exit the Audio Menu after five seconds of inactivity VOLUME Volume Level e User has 5 seconds to use the Volume button to adjust the desire volume level the volume level will be shown on the LCD display ranging from 00 lowest to 46 highest BASS Bass Level e User has 5 seconds to use the Volume Up or Down button to adjust the desired Bass level range from 6 to 6 TREBLE Treble Level e User has 5 seconds to use the Volume Up or Down button to adjust the desired Treble level range from 6 to 6 BALANCE e User has 5 seconds to use the Volume Up or Down button to adjust the Balance between the right and left speakers from R12 full right to L12 full left C00 represents an equal balance between the right and left speakers FADER e User has 5 seconds to use Volume Up or Down button to adjust the Fader between the front and rear speakers from R12 full rear to F12 full front COO represents an equal balance between the front and rear speakers 9 TUNER OPERATION 7 BAND BUTTON BAND SEARCH Press BAND to change between FM bands and AM MW bands 20 21 TUNING UP DOWN BUTTON 4 i Manual Tuning Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio frequency number up or down one step Auto Seek Tuning Press the Up Tuning or Down Tuning button for less than 3 seconds to move to next station a
10. 7 Y 18 vl vl y Audio Transfer Talking Volume up down HU Au Hi 1 Hh mwe v Ausiotanster wv v vw v Ww v 4 Panasonic amp Sharp Kresen En ee owe SEV _ v lv a ek Audio Transfer Talking Volume up down Audio Transfer Volume up down Redial last call 5 Siemens amp BenQ SIS ia 1n Ci v v M Audio Transfer Talking Volume up down Audio Transfer Volume up down Rediltesteal wT e 0 u y sw 6 Dopod amp MIO amp Blackberry Wn nw NANT 5 700 8700 mn A ww bv v Cm v v v 7 Pangean v v EA IIIS Oooow 7y 7y vv rr vo v_ v 0 00000 0 Audio Transfer Talking Volume up down age om AK ANE Volume up down Redial last call awe Eo gt y 7 Sumsung amp LG 2 LIEN EEE ll Audio Transfer Volume up down Volume up down Redial last call OO X vA _ yv v _ y PAIRING Pairing The Blue Tooth System Between User s Mobile Phone amp The Unit Access into MENU PAIRING mode to activates the operation of Pairing D Please see MENU Operation for more details of how to access into MENU mode e Oncethe
11. A TRANSFER MP3 OR WMA MUSIC FILES ON CD DISC This operation only can be performed during disc playing a MP3 or WMA music file 1 Playback a music file to be transferred and then long press the COPY button to activate the Transfer mode 2 The LCD will display gt gt 7 as default Rotate the encoder volume knob to navigate thru 2 gt L S gt E 2 CAFI for selection of the storage media 3 Once selected the storage media Press AUDIO button as confirmation to transfer the Playing file If no further button is press within a 10 second time out the unit will automatically resume to the previous mode 4 If the unit detected the selected media memory capacity is used up METT FLAU Will be displayed on the LCD for a while then automatically resume to the previous mode 5 After pressing AUDIO button to start the transfer the playing music file will stop and the transferring will start at the same time The following step is an example of if selected USB 6 When the transfer is processing the LCD will displayed 2 2 gt 71 7 When the file transfer is completed the LCD will display DF 7 for a while and automatically playback the present music file which have been transferred The transferred music file is automatically saved as a file into Folder MY MP3 or MY WMA by the advance File Management system of this unit Tips For more details information of File Management system of this unit Pls see FILE
12. Jk NOT DISPLAY folder numbers x e Itis not possible to check folders that do not include MP3 WMA files x These folders will be skipped without 022 WwMa displaying the folder number and 023 wma name XX NOT DISPLAY gt FILE FOLDER PLAY There are three different play methods as following File Folder Intro play e Press M2 button more than 3 seconds during playing MP3 WMA disc for intro play all files of the current folder Intro play should restart from the first song of the current folder after all files in the current files have been intro played To disable current folder intro play long press M2 button more than 3 seconds e Press M2 button less than 3 seconds is intro play all files on the disc Intro play should re start at the very first file of the disc after all files in the disc has been intro played To disable all files intro play press M2 button less than 3 seconds E 16 File Folder Repeat play e Press M3 button more than 3 seconds during playing MP3 WMA disc for repeat play all files of the current folder And keep on repeat playing the current folder until repeat play is disabled To disable current folder repeat play long press M3 button more than 3 seconds e Press M3 button less than 3 seconds to repeat play the current file And keep on repeat Playing the current file until the repeat play is disabled To disable cu
13. MCD 365 Bluetooth W Wet am Eg o pakiki 2 pec aiii e 2 INSTRUCTION MANUAL BLUETOOTH SUPPORT USB SD MMC INTERFACE CAR CD MP3 WMA PLAYER RECEIVER OT 101 gt 2 3 4 BUTTON LESS TOUCH PAD PANE This unit is equipped with the most advanced TOUCH SENSE PANEL which is easy and convenient to use GBS And here is some tips on how to use this touch sense panel 9 The pressing or activating of each button actually all you need is a very light touch even not really necessary to PRESS it Just touch lightly can be good enough to activate the button Except for the power button you have to touch and hold it for about 2 3 second to power on or off the unit Or for some of the buttons which has secondary function which need to touch and hold it for 2 3 second in order to activate the secondary function e Area to be TOUCHED in order to activate the button For each button in order to activate it correctly best AREA to touch is the lighted or illuminated area For ex the power button only just touch the illuminated power symbol Or for the mute button just touch the ILLUMINATE MUTE AREA 1 NOTE OF DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area moisture may condense on the lenses inside the unit Should this occur the unit will not operate properly In such a case remove the
14. USB Host Memory Card Support Type of Memory Card RADIO SECTION FM Frequency Range Intermediate Frequency UsableSensitivity StereoSeparation S NRatio AM MW Frequency Range Intermediate Frequency UsableSensitivity S NRatio BLUE TOOTH Power Consumption Output Power Frequency Band Range Standard GENERAL PowerSupply Polarity Speaker impedance Power Output REMARK Compact disc audio system Compact disc 44 1KHz 1bit 5 20 000Hz 2 stereo 70dB Host 1 1 compatibles 2 0 SD and MMC 87 5 108 Mhz 10 7 MHz Better than 15dB at S N 30 dB 25 dB at 1KHz 50 dB 522 1620 KHz 450KHz Better than 45dB 40 dB 200mA Max 0 dBm Class II 2 4GHz 2 4835GHz ISM Band 3 meters free space Bluetooth 1 2 specification DC 11 14V Negative Ground 4 ohms 4 x75W Specifications subject to change without notice E 37 19 TROUBLE SHOOTING Before going through the check list check wiring connection If any of the problems persist after check list has been made consult your nearest service dealer symptom Solmon No power The car ignition is not on If the power supply is properly connected to the car accessory terminal switch the ignition key to ACC The fuse is blown Replace the fuse Disc cannot be Presence of CD disc inside Remove the disc in the player then loaded or ejected the player put a new one Inserting the disc in reverse Insert the compact disc with the
15. a while then automatically resume to the previous mode 5 After pressing AUDIO button to start the transfer the playing music file will stop and the transferring will start at the same time The following step is an example of if selected USB 6 Under transfer is processing the LCD will display gt gt gt 71 7 When the file transfer is completed the LCD will display KTO EH for a while and automatically playback the present music file which have been transferred The transferred Music file is automatically saved as a file into the Folder MY_MP3 or MY WMA by the advance File Management system of this unit Tips For more details information of File Management system of this unit Please see FILE MANAGER my Under transferring mode All the MP3 WMA operation is not functional like file up down Repeat Random and Intro etc The audio will remain recording by the unit system even MUTE function is activated A gt The Transferring will automatically stop if the storage device memory is less than 2MB A WARNING 1 Never remove the USB Stick while recording or file transferring to USB Stick It may damage the USB Stick and sometimes will caused the unit system lock up 2 It is not recommended to insert USB stick while recording is under progress to other storage device Always remember to stop the recording or after the recording is completed then insert the USB stick 3 Do not switching mode of the
16. abel up side Inserting the SD or MMC card Detach the Push in till heard a click Remove the Memory Card Front Panel Removing the SD or MMC card Mode change to MEMORY CARD After a SD or MMC card was inserted into the main unit card slot Press Mode button to select SA MM Mode The unit will display 5 7 MMC for a while then starts PEA BING The files contained on the Memory Card Once the unit read the MEMORY CARD successfully the first audio music file on the Memory Card will automatically start playback Press Mode Button repeatedly is allowing changing to other modes or switch back to 57 MME Mode my If no any Memory Card is inserted into the main unit card slot Press mode button will automatically skip 57 97 mode Music File Playback Operation All the SD or MMC Memory Card playback operation function is same as the operation on CD MP3 WMA Pls refer to CD MP3 WMA Operation for more details 14 MUSIC FILES COPYING TRANSFERRING Thanks for the most useful and convenient files transferring function of this unit user can easily transfer music files between USB Stick SD or MMC Memory card and on the CD Disc Please read below for the details operation of this function TRANSFERABLE MEDIA Files are transferable within the following media Removable USB Stick SD Memory Card e MMC Memory Card File on the CD disc MUSIC FORMAT SUPPORTED BY FILE TRANSFER ARE MP3 and WM
17. at the local dealer or consult with the local dealer in case it is not mentioned in the list 1 Sony Ericsson Z600 Z600 T630 T630 a EU Ra AF N ve Te Tv Ty Pv fv fa Pairing cancel gt In Band Ring Tone Talk Wm y Audio Transfer Talking volume up down Audio Transfer g SIS Volume up down Redial last call W550i W550i Z800i Y ZZ v v i v v Pairingeancet wv Y t Y Y vv i ETTE Xxx ww v vv vv lpjv v o Audio Transfer Talking vmewem_ vv w 0 ww _w ww T Audiotranster wv Y CN voumeupdem wv Y rt v 1 v _lpmp yv O Rediattasteat A vv 1 2 Nokia Ww A Audio Transfer Talking Volume up down wv Y Voumeupidown wv v hh CO vy o wv v v MA A v v Vv REE em EE GE Pairing v wT Pangean wv v 7 v I Y O KY e O Oe R Z Audio Transfer Volume up down 3 Motorola al ee _ f r sm r ua OIOA wy Tw Tv fw yy Y 1
18. ater or where it would be subject to dust dirt or excessive vibration Be sure to remove the front panel before installing the unit DIN FRONT REAR MOUNT This unit can be property installed either from Front conventional DIN Front mount or Rear DIN Rear mount installation utilizing threaded screw holes at the sides of the unit chassis For details refer to the following illustrated installation methods A and B DIN FRONT MOUNT Method A Installation the unit h Dashboard 2 Holder After inserting the half sleeve into the dashboard select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place 3 Screw Dashboard Nut 6mm Spring washer Screw 4x12mm Screw Support Strap Be sure to use the support strap to secure the back of the unit in place The strap can be bent by hand to the desired angle 7 Plain washer 3 3 Removing the unit a Trim Plate Installation Push the trim plate against the chassis until it is fitted Frame Insert fingers into the groove in the front of frame and pull out to remove the frame When re attaching the frame point the side with a groove down wards and attach it Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click Pulling the levers makes it possible to remove the unit
19. ay cause the unit to malfunction P8 o X Be sure to use CDs with disc mark JISE 28 dis ACT Se DIGITAL AUDIO DIGITAL AUD GITAL Sot pe AUDIO REE GRAB REWAITABLE 5 Do not use solvents such as benzine thinner commercially available cleaners or antistatic spray intended for analog discs Only for this unit CD Rs and CD RWs which have not undergone finalization processing cannot be played For more information on finalization processing refer to the manual for your CD R CD RW writing software or CD R CD RW recorder Additionally depending on the recording status it may prove impossible to play certain CDs record on CD R or CD RW 2 INSTALLATION Before finally installing the unit connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly Use only the parts included with the unit to ensure proper installation The use of unauthorized parts can cause malfunctions Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop like an emergency stop If installation angle exceeds 30 from horizontal the unit might not give its optimum performance 30 Avoid installing the unit where it would be subject to high temperature such as from direct sunlight or from hot air from he
20. d when making the Pairing or Re connection 3 Please always try pairing the Mobile Phone with Head unit after a few minutes of the Mobile Phone was Switched On to ensure the best pairing result 4 BT60 is this unit device model number which is displayed on the mobile phone 5 To achieve the best performance please always keep the Mobile Phone within 3 meters of the Head unit 6 Please always keep a clear path between the Mobile Phone amp the Head unit 7 Never put any metal object or any obstacle between the path of the Mobile Phone amp the Head unit 8 Some brand of Mobile Phone like Sony Ericsson may have Power Saving Mode selection when Blue Tooth mode is switched on PLEASE DO NOT Switches ON Power saving Mode when operating with this Head Unit as some abnormal communication behavior will happen occasionally if Power Saving Mode is switched on 9 Before user make Outgoing call or Incoming call make sure the mobile phone s Blue Tooth function was switched ON 10 To ensure the best conversation quality performance please always keep talking within 1 meter of the Head Unit 11 If user want to Dis connect the Head unit with the Mobile Phone please switch OFF Blue Tooth connectivity on the Mobile Phone or go to the system menu dis connect to disconnect the bluetooth connectivity manually please refer to the user manual section dis connection of the bluetooth system for details instruction 12 So
21. disc and wait for about an hour until the moisture has evaporated NOTES ON CDs 1 A dirty or defective disc may cause sound dropouts while playing To enjoy optimum NOTES ON DISCS If you use the discs explained below the sticky residue can cause the CD to stop sound handle the disc as follows Handle the disc by its edge To keep the disc clean do not touch the surface P spinning and may cause malfunction or ruin your discs Do not use second hand or rental CDs that have a sticky residue on the surface for example from peeled off stickers or from ink or glue leaking from under the stickers There are paste residue P1 Ink is sticky P 5 2 Do not stick paper or tape on the disc P2 AS 3 Do not expose the discs to direct sunlight or heat sources such as hot air ducts or leave them in a car parked in direct sunlight where there can be a considerable rise in temperature S the car P3 Yes amp 4 Before playing clean the discs with an optional cleaning cloth Wipe each disc from the centre out P4 P5 Do not use rental CDs with old labels that are beginning to peel off Stickers that are beginning to peel away leaving a sticky residue P 6 P 6 Do not use your CDs with labels or stickers attached Labels are attached P 7 P7 Do Not Use Special Shape CDs Be sure to use round shape CDs only for this unit and do not use any special shape CDs Use of special shape CDs m
22. e USB stick from the Front panel USB plug Always remember to switch off the unit s power or switch to other mode then remove out the USB Stick Never try removing the USB Stick while playing music file on the USB stick It may damage the USB Stick and sometimes will caused the unit system lock up my The unit can support playback Music Player which have USB Interface However due to the fast changing decoder technology and different kind of hardware interface This unit may or may not be compatible to all the Music Player and USB Stick especially those USB Stick Player which require to install a program driver my About Music Flash Player with USB Interface Usually the unit takes longer time to read this kind of player than normal USB Stick Especially if the Flash Player with built in power battery sometimes takes 20 30 seconds to start up the playback E gt The unitis not compatible to playing any Portable Hard disk Music File Playback Operation All the USB playback operation function is same as the operation on CD MP3 WMA Please refer to CD MP3 WMA Operation for more details E 18 13 MEMORY CARD OPERATION The unit can support playback MP3 and WMA Audio format which are stored into SD and MMC Memory Card Pls read below before you start the operation of Memory Card Inserting and Removing a SD or MMC card on the main unit Detach the Insert the Memory Card Push in till heard a click Front Panel with L
23. e erasing will start at the same time 9 EFHGE DH will display on the LCD after the music file erase is successful and the unit will automatically start playback the next music file 2 Erase under Files Number Search Mode User can select the Music file Number want to erase by file Number Search mode After selected the file number want to erase Long press the BAND button to activate the ERASE mode The LCD will display EFYFTEGETTE I Short Press the AUDIO to enter into the ERASE mode Once enter into the erase mode User can rotate the encoder to select 2 to confirm the erase or rotate the volume knob to select to cancel the ERASE mode If no further button is press within a 5 second time out The unit automatically resume to the previous mode Once the is displayed on the LCD press the AUDIO button to final confirm to erase the selected music file Ty If want to CANCEL the erase of the present music file Rotate the encoder to Once the is display on the LCD press the AUDIO button again to cancel the erase Mode After pressing AUDIO button to start the ERASE the present playing music file will Stop and the erasing will start at the same time e EFASE DH will display on the LCD after the music file erase is successful and the Unit automatically start playback of the next music file E 22 3 Erase under Files NAVIGATE search mode You can select a Mu
24. e ignition and the 3 pin yellow is connected to the constant power supply Unit Vehicle Ignition wire gt 1 PIN RED ISO RED WARNING Connecting the ISO Connector YELLOW CONNECTOR See Figure 1 Battery wire YELLOW gt BD 3 PIN YELLOW 2 The 1 pin red of the vehicle s ISO connector is connected to the constant power supply and the 3 pin yellow is linked to the ignition Unit Vehicle Ignition wire gt 1 PIN RED RED V Battery wire Ras gt BE 3 PIN YELLOW YELLOW 3 The 3 pin yellow of the vehicle s ISO connector is not connected to anything while the 1 pin red is connected to the constant power supply or both the 1 red and 3 yellow pins are connected to the constant power supply 8 YOLOANNOO v YOLOANNOO Figure 1 ISO CONNECTOR 4PIN 8PIN FEMALE WITH MALE TERMINAL ISO CONNECTOR WIRING CHART WIRE COLOR FUNCTION LABEL Unit Vehicle Ignition wire lt gt 1 PIN RED aie rowena a IGNITION ACC ij Battery wire EE 3 PIN YELLOW YELLOW When the connection is made as in B above the unit s power will not be linked to the ignition is turned off GREY BLACK RIGHT FRONT SPEAKER To link the unit s power to the ignition connect the ignition cable ACC red toa Oo wE LEFT FRONT SPEAKER power source that can be turned on and off with the ignition key GREY RIGHT FRONT SPEAKER ignition key For that reason always make su
25. e select knob counter clockwise to move back to the last upper level of a folder ID3 INFORMATION DISPLAY If any MP3 WMA file recording with ID3 Tag information The ID3 information such like Album title Track title Artist Title will be displayed and automatic scrolling through the LCD while the file is playing User also allows pressing the AS PS button repeatedly to view the ID3 tag information manually 12 USB OPERATION The unit can support USB Host Function It can playback MP3 and WMA Audio format which are stored into USB Memory Stick or USB interface Music Player Please read below before you start the operation of USB HOST Function Inserting and Removing USB Drive Never Detach the Panel when a Always remove the USB stick before detach Inserting the USB stick USB stick was plug on the socket the panel Removing USB Drive Step Secure panel with left hand Step Carefully remove USB drive Mode change to USB HOST Under any other mode while inserting a USB Stick into the front panel USB plug the unit will Automatically switches from present playing mode to USB HOST mode The unit will display LED HEIST fora while then starts FFAFIZT ZING the files contained on the USB Stick Once the unit read the USB Stick successfully the first audio music file on the USB stick Playback will Automatically start Press Mode button repeatedly to change to other modes or switch back to USB HOST 4 WARNING Before remove th
26. eses e ISO 9660 Level 1 11 characters ISO 9660 Level 2 31 characters e Joliet 31 characters e Romeo 31 characters Up to 200 characters can be displayed in the long file name format For a list of available characters see the instruction manual of the writing software and the section Entering File and Folder Names below The media reproducible on this unit has the following limitations Maximum number of nested folders 8 Maximum number of files per disc 999 Maximum number of files per media device 2000 Maximum number of folders per disc 255 MP3 WMA written in the formats other than the above may not be successfully played and their file names or folder names may not be properly displayed MP3 WMA Encoder and CD Writer Settings Use the following settings when compressing audio data in MP3 data with the MP3 encoder e Transfer bit rate 32 320 kbps 9 Sampling frequency 32 44 1 48 KHZ WMA 16 22 05 24 32 44 1 48kHz MP3 When using a CD writer to record MP3 WMA up to the maximum disc capacity disable additional writing For recording on an empty disc up to the maximum capacity at once check disc at once Entering ID3 Tag This unit supports ID3 tag versions 1 0and 1 1 Entering File and Folder Names Names using the code list characters are the only file names and folder names that can be entered and displayed Using any other character will cause the file and folder names to be displayed incorrectly The u
27. he CD The selected track number will appear on the display Press and hold the Up Tuning or Down Tuning button 144 pb for more than one second to fast forward or fast reverse through the disc CD play starts when the button is released 14 REPEAT BUTTON RPT Press REPEAT BUTTON RPT during disc play to continuously repeat the track Press REPEAT BUTTON RPT again to stop Repeating 15 RANDOM BUTTON RDM Press RANDOM BUTTON RDM during disc play to play all tracks on a CD in random shuffled order Press RANDOM BUTTON RDM again to stop random play 13 INTRO SCAN BUTTON INT During disc play press INTRO SCAN BUTTON INT to play the first 10 seconds to each track on the disc When the desired track is reached press INTRO SCAN BUTTON INT again to end the scan and play the selected track MP3 WMA OPERATION MP3 and WMA Windows Media Audio music files are audio compression format This unit can play MP3 WMA directly from files contained on a CD R RW USB Memory Stick SD or MMC Memory Card Notes on MP3 WMA Play This unit can play MP3 MPEG1 2 2 5 Audio Layer 3 However the MP3 recording media and accepted formats are limited When writing MP3 WMA pay attention to the following restrictions Acceptable Medium Formats The following formats are available for the media used in this unit The maximum number of characters used for file name including the delimiter and three character extension are indicated in parenth
28. hile there is an Incoming call or under talking mode the Panel Open Eject key is dis activated Rejecting An Incoming Call e User can press CLEAR BAND button to reject the incoming call The audio output of the present mode will be muted and the ringing tones will be heard if an incoming call is not being answered After pressing the CLEAR BAND button the mute of the present mode will be released OUTGOING CALL Making An Outgoing Call e User can use his her Mobile Phone to dial and make an outgoing call Once the user has completed the dialling the display should show L FILL 222 NOTE The audio output of the present mode will ONLY be muted after pressing the PHONE button as a confirmation to dial the outgoing call While there is an outgoing call or under talking mode the Panel Open Eject key is dis activated e During the talking mode the LCD Display will display the duration VFI LILI of the conversation e User can use the volume up down to adjust the volume level e Io end the conversation press the CLEAR BAND button The unit will switch back to the previous mode automatically The mute of the previous mode will be released at the same time e During the talking mode if the Ignition is being turned off the unit will keep the conversation even if the Ignition is Switched off After finished the conversation User can press CLEAR BAND button to switch off the un
29. ice The PLAY command may differs depending on the Audio device If the Audio device is not able auto start playing song after changed mode into BT AUDIO mode user may need to operate the PLAY mode on the audio device to start the song playback 2 Track up down by pressing the Track up down buttons on this unit 3 Pause Play by pressing the Pause Play button on this unit 4 Volume up down by rotating the encoder knob on this unit 5 Audio Mute by pressing the Mute button on this unit 6 Stop playback by mode changing mode into any other mode of this unit The AVRCP operation may differ depending on the audio device all the other operation other than those listed above should be performed on the audio device Hands free Phoning While Bluetooth Audio Streaming If the connecting playback audio device is a mobile phone all the hands free function is still available under the Bluetooth audio streaming like the answering incoming call making an outgoing call etc Disconnecting An Audio Device With This Unit User can close the Bluetooth Audio connection by disconnecting with the audio device E gt The details operation of disconnecting with this unit please refer to the DIS CONNECTION operation for more details 18 SPECIFICATIONS CD PLAYER System Usable disc Sampling frequency No of quantization bits Frequency Number of channels S N Ratio MEDIA SECTION
30. is unit Connecting A Bluetooth Audio Device With This Unit Before using audio device to play music on this unit the audio device must be paired with this unit first a For the details operation of Pairing with this unit Please refer to the PAIRING operation for more details b How to use the Bluetooth audio device to pair with this unit please refer to the instruction manual of the Bluetooth device If the audio device has both HFP Hands Free Profile and A2DP Advance Audio Distribution Profile this unit will automatically pairing these two profiles at the same time For ex if a mobile phone has both HFP amp A2DP profile and this mobile phone is already HFP paired with this unit in this case A2DP audio device pairing is not necessary And this paired mobile phone will be added automatically to the list of PAIRED DEVICE AUDIO of this unit Please refer to MENU of BT for details of PAIRED DEVICE operation Listening To Music From An Audio Device In This Unit 1 Connect this unit with the audio device E gt For the details operation of connecting with this unit Please refer to the CONNECTING operation for more details 2 Press MODE button repeatedly until BT AUDIO appears on the display IMPORTANT To listen Bluetooth audio streaming from the audio device user MUST change the mode to BT AUDIO first Any other mode of this unit is not able to activate the Bluetooth audio streaming A2DP function
31. it CALL TRANSFER TO AUDIO TRANSFER FROM HEAD UNIT BACK TO THE MOBILE PHONE e During the talking mode user can long press the TRANSFER MODE button to transfer the audio from the unit back to the Mobile Phone for privacy reason The LCD Display will display TFCFUVSF EF on the LCD for 3 seconds E gt After the TRANSFEER MODE button is pressed the present mode will be muted at the same time user can press the Mute button to release the Mute When making an outgoing call it s not possible to CALL TRANSFER if the call is not being answered yet It s only possible to Transfer the call to Mobile Phone after the call is being answered Depending on different type of Mobile Phone the time need for activating the CALL TRANSFER mode is different Like Nokia Mobile Phone usually takes 3 5 seconds after pressed the TRANSFER MODE button for audio transfer back or forth through Unit to Mobile Phone HIGHLIGHT FEATURE e Incoming call ringing volume Preset the Ringing volume level for any incoming call E gt Pls see MENU PHONE VOL for details operation E 34 Bluetooth Audio Streaming A2DP Advanced Audio Distribution Profile User can listen to music files on an audio device on this unit if the audio device supports A2DP Advanced Audio Distribution Profile of Bluetooth Technology Please read the below instruction before operating the Bluetooth Audio streaming function on th
32. kwise To decrease the volume rotate the volume control counter clockwise When volume is adjusted the volume level will be shown on the display panel as a number ranging from 0 lowest to 46 highest 7 MENU OPERATION 18 MENU FUNCTION LIST MENU Press DISPLAY MENU for more than 3 seconds to access the menu Ei Will appear in the display momentarily Navigate the menu by pressing DISPLAY MENU momentarily to move forward to the next option The menu can also be navigated by using the Tuning Up or Tuning Down Button to move to the next or previous option Once the desired option appears in the display adjust that option by rotating the volume control within 5 seconds The following options are adjusted through this menu feature Pairing PAIR HF This feature is used to pairing the unit s Blue tooth system to your mobile phone or other Blue tooth device Under the MENU Pairing mode then press Audio button to start activating the Pairing PAIR HF is special use for pairing with mobile phone with Bluetooth function if the pairing device is a Bluetooth Audio device rotate the encoder to PAIR AD then press Audio button to start activating the pairing with audio device Tips Pls refer to BLUE TOOTH HAND FREE Operation regarding the details operation of PAIRING Re connection Dis connection RE CON DIS CON This feature is allows to Re connect or Dis connect to the paired mobile phone or Blue tooth de
33. me Mobile Phones can support IN BAND RING TONE such as Nokia In such case the Incoming Ringing Tone will be same as the original Ring tone of the Mobile Phone But some Mobile Phones like Sony Ericsson do not support this feature The Ring tone will be using the standard Ring tone of the Head unit 13 When in telephone mode during talking it is highly recommended to set the volume to below 30 in order to achieve the best sound quality As if the volume is too high it may create unwanted echo inside the car and this unwanted echo may feedback into the microphone 14 If the Bluetooth related operation is not performing normally like cannot make pairing cannot making an outgoing call User can try to make a SOFT RESET of the Bluetooth module by removing detaching the panel from the main unit and waiting for about 1 min Then re attach the panel to the unit amp retry the Bluetooth operation again Or user can RESET the whole unit by pressing the RESET button behind the panel gt By pressing the RESET button all the stored memory will resume to factory default FAQ Frequency Asking Questions Q Under phone conversation if the voice output from the car s speakers is not loud enough A Try increase the volume level of the head unit to a suitable sound level Q Under phone conversation the Listener cannot hearing my voice loud enough A First try asking the Listener increase the volume level on his her mobile phone
34. nagement System of this unit can help to well you organize all the music files just like a PC Pls read below for details FOLDERS MANAGEMENT This unit will automatically self create the below default folders onto any USB SD MMC media device once these devices are inserted into the unit MY OCD Folder for saving all the music files source from CD Disc MY MP3 Folder for saving all the MP3 music files transfer from other device MY WMA Folder for saving all the WMA music files transfer from other device MY FM Folder for saving all the music files source from FM Program MY AUX Folder for saving all the music files source from AUX Line In FILES MANAGEMENT This unit will automatically self create the file name following with the Folder Name for example Music file which recorded from CD disc the file name CD0001 MP3 will be automatically created amp saved in the respective folder 17 BLUE TOOTH HAND FREE OPERATION User Guide For Blue Tooth Operation 1 When user use our Blue tooth HEAD UNIT please make sure the mobile phone you use must does support Blue tooth functions Headset or Handsfree profiles or both 2 Before you start to use our Bluetooth HEAD UNIT please make sure complete pairing with your mobile phone first Please refer to the user manual section PAIRING for detail PAIRING instruction To ensure the best reception for Pairing or Re connection please make sure the Phone Battery is fully charge
35. nit recognizes and plays only files with the MP3 WMA extension E gt A file name entered with characters not on the code list may not play correctly Writing Files into a Media When a media containing MP3 WMA data is loaded the unit checks all data If the media contains many folders or non MP3 WMA files MP3 WMA play will be delayed it may take time for the unit to move to the next file and searches may not be performed smoothly Loading such a media may produce loud noise and cause damage to the speakers Do not attempt to play a media containing a non MP3 WMA file with the MP3 WMA extension or a media containing non MP3 WMA files Bit Rates The unit supports bit rates from 32 320 kbps Files Playing Order When selected for play Folder Search File Search or Folder Select files and folders are accessed in the order in which they were written by the PC writer Because of this the order in which they are expected to be played may not match the order in which they are actually played For example a media with the following folder file hierarchy is subject to Folder Search File Search or Folder Select as shown below e An outline of a Media with MP3 WMA is shown below Subfolders are shown as folders in the folder currently selected 1 LEVEL 2 LEVEL 3 LEVEL 4 LEVEL lt NOT DISPLAY o o19 MP3 e The equipment assigns folder g numbers The user can not assign gt lt
36. o the D C P always store it in a protective case after detaching it e Therearconnector that connects the main unit and the D C P is an extremely important part Be careful not to damage it by pressing on it with fingernails pens screwdrivers etc Note If the D C P is dirty wipe off the dirt with soft dry cloth only And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the D C P RESETTING THE UNIT e After releasing the front panel use a pencil or any non metalic object to press amp hold the reset button for five seconds to reset the unit 4 WIRING DIAGRAM ANTENNA ANTENNA EXTENDER JACK CABLE 5 lt A O FUSE H 2 20 PIN L AUDIO POWER HARNESS See Figure 1 RCA TO RCA CABLES GREY not supplied REAR LINE OUT me WIRE WIRE gt 8 I Bm T 7 _ BLACK 5 FRONT LINE OUT 2 JE AR BS we 5 gt Cc HH 1 The pin arrangement for the ISO connectors depends on the type of vehicle you a drive Make sure to make the proper connections to prevent damage to the unit The default connection for the wiring harness is described in below If the ISO connector pins are set as described in 2 or 3 make the connection as illustrated I Default setting The 1 pin red of the vehicle s ISO connector is linked with th
37. om the Head Unit and come back to Head unit e lf user wants Audio Transfer back from Mobile Phone to Head unit It needs to re connect manually The unit can be re connected by the following methods e Access into MENU RE CON mode to activate the manual RE Connection E gt Pis see MENU Operation for more details of how to access into MENU mode e Oncethe FPE is display on the LCD press the AUDIO button to activate the manual Re Connect mode 1 Keep the Mobile Phone within 2 Meter from the unit when making the connection 2 The manual re connect is only function with the Mobile Phone has already been paired with the unit before e The LCD Display will displayed WF7Z 7 gt gt gt during the connecting period e If the re connection is successful the LCD Display will display And the unit will switch back to the previous mode automatically e Ifthe re connection failed the LCD Display will display F F7ZiL And the unit will switch back to the previous mode automatically E 32 The unit will be Auto Re Connection by following operation e Every time turn the ignition key from off to on the unit will Auto re connect with the Mobile Phone Dis Connection of the Blue Tooth System The unit have a option function for user to disconnect the Blue tooth system with the unit The unit can be Dis connected by the following methods e Acces
38. own button Once selected the PTY item user have 5 seconds to press SELECT or TUNE UP or TUNE DOWN buttons lt 3 seconds to seek for the selected PTY item The LCD will display PTY SEEK If no station with the selected PTY broadcast can be received the LCD will display No Match PTY and blinks for 5 seconds then returns to the previous mode User can store his favor PTY into the preset memory M1 to M6 After selected a PTY item long press any one of the preset memory button can store the selected PTY To recall the stored PTY item by switching on PTY mode then press preset memory lt 3 seconds the unit will automatically search the stored PTY station in the preset memor _SpeechGroup POP ROCK EASY LIGHT CLASSICS OTHER JAZZ COUNTRY NATION OLDIES FOLK Note Factory default stored for PTY preset memory M1 News M2 Information M3 Pop Music M4 Sports M5 Classics M6 Finance E 13 11 CD MP3 WMA OPERATION INSERT AND EJECT CD Insert a CD label side up with the unit turned on and the disc will begin to play Press the Eject button to stop CD play and eject the CD The unit does not have to be turned on to eject the CD CD DA OPERATION 12 PAUSE BUTTON Press the pause button to suspend disc play Press the pause button again to resume disc Play 20 21 TRACK SELECT Press the Up Tuning or Down Tuning button I for less than one second to advance to the next track on t
39. r No File Playback on the disc or Replace the disc or Media Device Media Device Disc Error Maybe disc dirty disc scratched Replace the disc disc upside down Sound skips Memory Full
40. re to turn off the unit s power when the WHITE BLACK LEFT FRONT SPEAKER GREEN LEFT REAR SPEAKER GREEN BLACK LEFT REAR SPEAKER 6 BASIC OPERATIONS 3 PANEL RELEASE BUTTON REL Press this button to remove the control panel 1 POWER ON OFF BUTTON O Long press POWER MUTE button or any other button on the front of the radio to turn the unit on And Long press POWER MUTEbutton again to turn the unit off 1 MUTE BUTTON MUTE Short Press the mute button momentarily to mute the audio volume and Mute will flash in the display Press the mute button again to restore volume to the previous setting 10 iX BASS BUTTON iX Bass Long press the iX Bass button to turn on the IX Bass function and the X BAS icon will appear on the LCD display Press the iX Bass button again to turn off the IX Bass function 5 MODE BUTTON MODE Press MODE button to select a different mode of operation as indicated on the display panel Available modes include Tuner CDP USB Host SD MMC and Aux Line In 18 FRONT PANEL AUX IN JACK Connect the external signal to AUX in jack located at the front of the panel then press Mode button to select Aux mode Press Mode Button again to cancel Aux Mode and return to previous mode FRONT CABINET LEFT TRACK RIGHT TRACK OPEN THE AUX IN JACK DOOR COVER TO ACCESS TO THE AUX IN JACK 6 ENCODER VOLUME BUTTON To increase the volume rotate the volume control cloc
41. rrent file repeat play press M3 button less than 3 seconds File Folder Random play e Press M4 button more than 3 seconds during playing MP3 WMA disc to random play all files of the current folder To disable current folder random play long press M4 button more than 3 seconds e Press M4 button less than 3 seconds is random play all files on the disc To disable all file random play press M4 button less than 3 seconds Folder Up Down Pla e Press M5 button less than 3 seconds to One Folder Down e Press M6 button less than 3 seconds to One Folder Up MP3 WMA File or Folder Search Direct File Number Searching Press BAND button The LCD will display Number and the illumination around the select knob will blink Rotate the knob to select the desired track number then press in on the knob to confirm and play the selected file Folder Files Navigate Searching Press BAND button twice The LCD will display Navigate and the illumination around the select knob will blink Rotate the knob to navigate through all folders and sub folders on the disc The folder names will be displayed on the LCD Press the select knob for more than three seconds to play the first file in the folder Press the select knob for less than three seconds to access the sub folders or files Rotate the select knob to navigate then press the select knob to confirm and begin file play During navigation search press AS PS or rotate th
42. s into MENU DIS CONN mode to activate the manual Dis Connection E gt Please see MENU Operation for more details of how to access into MENU mode e Once the 22 is display on the LCD press the AUDIO button to activate the manual Dis Connect mode e The LCD Display will displayed F14 7 2 during the Dis connecting period e If the Dis Connection is successful the LCD Display will display And the unit will switch back to the previous mode automatically INCOMING CALL ANSWERING AN INCOMING CALL e When there is an incoming call the display will display the Phone Number If the incoming call has no caller number the LCD will displa FLNE PV user can short press the PHONE Audio button answer accept the call Always press the PHONE AUIDIO button answer accept the call after the LCD display the Incoming caller telephone number The audio output of the present mode will be muted and the ringing tones will be heard if an incoming call is not being answered e User can use the volume up down to adjust the volume level e To end the conversation press the CLEAR BAND button The unit will switch back to the previous mode automatically and release the mute of the previous mode at the same time An Incoming call under stand by mode Ignition on amp Power Off The system will automatically switch on the head unit E gt W
43. sic file want to erase by files Navigate Search mode After selected the music file want to erase by files navigate search Long press BAND button to activate the ERASE mode The LCD will display EFOFTVGE I Short Press the AUDIO button to enter into the ERASE mode Once Enter into the ERASE mode user can rotate the encoder to select 7 as to confirm the erase or rotate the volume knob to select PW to cancel the ERASE mode If no further button is press within a 5 second time out The unit will automatically resume to the previous mode Once the 2 is displayed on the LCD press the AUDIO button again to final confirm Erase the selected music file ny If want to CANCEL the erase of the present music file Rotate the encoder to Once the is display on the LCD press the AUDIO button again to cancel the erase mode After pressing AUDIO button to start the ERASE the present playing music file will stop and the erasing will start at the same time 9 EFFISE LIF wil display on the LCD after the music file erase is successful and the unit will automatically start playback of the next music file A WARNING 1 Do not switching mode of the unit during the Erasing 2 Do not turn off the Power of the unit during the Erasing 3 Do not switch the Ignition key off during the Erasing 4 Do not detach the front panel during the Erasing E 23 16 FILES MANAGER The advance File Ma
44. unit during the File Transferring 4 Do not turn off the Power of the unit during the File Transferring 5 Do not switch the ignition key off during the File Transferring E 21 15 MUSIC FILES ERASING You can erase files from the USB Stick or Memory Card Please read below for the details operation of this function ERASABLE MEDIA amp USB Stick and Memory Card E gt Music files which are on the CD Disc is NOT ERASABLE By this unit ERASING MUSIC FILES ON THE MEDIA There are THREE different methods for erasing files 1 Erase while the Music File is playing Long press BAND button to activate the ERASE mode The LCD will display E FFRED I Short Press the AUDIO to enter into the ERASE mode Once enter into the erase mode You can rotate the encoder volume knob to select 7 as to confirm the erase or rotate the volume knob to select as for cancel the erase mode If no further button is press within 5 seconds time out The unit automatically resume to the previous mode Oncethe 2 is display on the LCD press the AUDIO button again to final confirm erase the present playback music file Ty If want to CANCEL the erase of the present music file Rotate the encoder volume knob to Once the is displayed on the LCD press the AUDIO button again to cancel the erase mode After pressing AUDIO button to start the ERASE the present playing music file will stop and th
45. utomatically 12 17 PRESET STATIONS BUTTONS Six numbered preset buttons store and recall stations for each band Store a Station Select a band if needed then select a station Hold a preset button for 3 seconds The preset number will appear in the display Recall a Station Select a band if needed Press a preset button to select the corresponding stored station 11 AUTOMATICALLY STORE PRESET SCAN AS PS Automatically Store Automatically select 6 strong stations and store them in the current band Select a band if needed Press AS PS button for more than three seconds The new stations replace stations already stored in that band Preset Scan Scan stations stored in the current band Select a band if needed Press AS PS button for less than 3 seconds The unit will pause for ten seconds at each preset station Press AS PS button again to stop scanning when the desired station is reached STEREO The unit will automatically pick up a stereo signal when available When in stereo mode the ST icon appears in the display When no stereo signal is available the unit will automatically revert to mono operation and no icon will be displayed 10 RDS OPERATION RDS functions The unit is equipped with the following RDS function 1 AF Alternative Frequencies CT Clock Time EON Enchanced other Network PI Program identifications PS Program service name PTY Program Type REG Regional Change TA Traffic Announcement
46. vice by manually Under the Menu RE CON mode Rotate the encoder to navigate thru RE CON re connection and DIS CON Dis connection After selected the mode for connection then press Audio button to start activating the connection mode Incoming call ringing volume BT VOL The unit can preset the Ringing volume level for any incoming call The default RINGING VOLUME LEVEL VALUE is 20 Rotate the encoder Knob to adjust from Min 00 to Max 38 Time Set CLK The time on the clock will be set to 12 00 as the default Program the current time by rotating the volume control clockwise to adjust the minutes and counterclockwise to adjust the hours AREA TUNER FREOUENCY SPACING This option allows the selection of the freguency spacing appropriate for your area AREA EURO is the default setting Rotate the volume control to select the U S A Latin America Europe or Oirt options Local Distance Select This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning Distance is the default allowing the radio to stop at a broader range of signals To set the unit to select only strong local stations during automatic tuning rotate the volume control Press the volume up down button until Local appears in the display Regional On Off REG REGIONAL OFF will be displayed by default The user now has 5 seconds to adjust by using volume up down button from
Download Pdf Manuals
Related Search