Philips Saeco HD8743
Contents
1.2. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner Return appliance to the nearest authorized service facility for examination repair or adjustment The use of accessory attachments not recommended by the appliance manufacturer may result in fire electric shock or injury to persons Do not use outdoors Do not let cord hang over edge of table or counter or touch hot surtaces 10 Do not place on or near a hot gas or electric burner or in a heated oven 11 Always attach plug to appliance first then plug cord into wall outlet To disconnect turn any control to off then remove plug from wall outlet 12 Do not use appliance other than for intended use 13 Save these instructions SAVE THESE INSTRUCTIONS CAUTION This appliance is for household use only Any servicing other than cleaning and user maintenance should be performed by an authorized service center Do not immerse machine in water To reduce the risk of fire or electric shock do not disassemble the machine There are no parts inside the machine serviceable by the user Repair should be done by authorized service personnel only 1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage Never use warm or hot water to fill the water tank Use cold water only Keep your hands and the cord away from hot parts of the appl
3. 16 A for phase and not subject to conditional connection EN 61000 3 3 1995 corr 1997 A1 2001 A2 2005 Electromagnetic compatibility Requirements for household appliances elec tric tools and similar apparatus Part 2 Immunity Product family standard EN 55014 2 1997 A1 2001 following the provisions of the Dirertivac Fe 2nna ak Er annanng Gaggio Montano Rg DI anager li 28 04 2009 My llani C NAL ae The manufacturer reserves the right to change the features of the product without prior notice PHILIPS www philips com saeco Type HD8743 HD8745 HD8747 Cod 15002552 Rev 0O del 15 03 10 Register your product and get support at www philips com welcome DKSMALL Type HD8743 HD8745 HD8747 SUP 033R OPERATING INSTRUCTIONS READ THESE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE PHILIPS Saeco IMPORTANT SAFEGUARDS When using electrical appliances basic safety precautions should always be followed including the following 1 2 3 Read all instructions Do not touch hot surfaces Use handles or knobs To protect against fire electric shock and injury to persons do not immerse cord plugs or appliance in water or other liquid Close supervision is necessary when the appliance is used by or near children Unplug from outlet when not in use and before cleaning Allow to cool before putting on or taking off parts and before cleaning the appliance
4. gle Posi a dooce See label on the inside of the service door Housing material euries iiare KE Ee En aad ee ESRAR TENE ees coe aad SASKE O NEETA DESEN SEDE ABS Thermoplastic ILAS A ID EEEE AE T EE E E EA A E O EA A EEA AA 295 x 325 x 420 mm 11 5 x 13 x 16 5 Weightas ceinen E A o a A nats E E E E EAE ERE E O E ASTOA 6 9 kg 15 Ibs Power Cord Length i eiri iar evisdsc iiri tE ie EEA ETE ACEA AAEE EVEA COREE EE a VE V ADE O 1 2m 47 Control Panel sseui a Paina ena ua doa bed svacs pa haga Gees ices A Such cs bead Syms evan dead eat cod Vale E Mitre Ea Front Pannarello only available for certain models 0 cece eee eee e eect eee ee eee e eee eee eee eneeeeeeee tne eneenne es Special for cappuccinos Waterlank e nie te hnk A statesman Giatettes sia ont E aed aoecd eaten beset aan erate N aAA 1 0 litres 33 oz Removable Coffee Bean Hopper Capacity ii seeniori an sGiceds tan eendovace at ads A EES aay bank E aun de geen A adieg deb ce Peeve aR 170 6 5 oz Dreqdrawer Drawer Capacity sccsvecvaus ire tiine A ERTER ov eae Yok fee IS EY SA Sede ON GE ENEE nee Ba pa eae ERENT pent AEEA i 8 Pump pressure nassa inust ose Aaa a irene esate lan testa git coche aa the anc actuatable e a ein eea aei ue a N pay fare dete 15 bar E EAIA OEA A E T O E I TEETE AA Stainless steel Safety mechani MS rcii aii ra Kan Reds CREE VERTE VEYE iy eile ole VETRE EESE ESETE ek cea ean VE EVESEK EERI E Oe Thermal fuse
5. NOT start contact an authorized service center TROUBLESHOOTING Problems The machine does not turn on The coffee is not hot enough Hot water or steam is not dispensed The coffee is not creamy enough See note The machine takes a long time to warm up or he amount of water dispensed from the wand is too little The brew group cannot be removed lt 17 gt Causes The machine is not connected to the power source The cups are cold The hole of the hot water steam wand is clogged Solutions Connect the machine to the power source Preheat the cups with hot water Clean the hole of the hot water steam wand using a pin Make sure that the machine is turned off and has cooled before performing this operation annarello is dirty if supplied The coffee blend is unsuitable the coffee is not freshly roasted or the grind is too coarse The machine s water circuit is obstructed by limescale build up The brew group is out of place Clean the Pannarello Change coffee blend or adjust the grinder as explained in section Coffee Grinder Adjustment Descale the machine Turn the machine on Close the service door The brew group au tomatically returns to the correct position The dregdrawer is inserted Remove the dregdrawer first then the brew group The machine grinds the coffee beans but no cof The brew group is dirty Clean the brew group section Brew Group fee comes o
6. Wait for the cycle to finish automatically You can stop dispensing as well by pres sing either coffee button ADJUSTMENTS The machine that you have bought allows for certain adjustments that will permit you to use it to its full potential Saeco Adapting System Coffee is a natural product and its cha racteristics may change according to its origin blend and roast The Saeco coffee machine is equipped with a self adjusting system that allows the use of all types of coffee beans available on the market non caramelized The machine automatically adjusts itself in order to optimize the extrac tion of the coffee ensuring perfect compression of the beans to obtain a creamy espresso coffee that will release all the aromas regardless of the type of coffee used The optimization process is a learning process that requires the brewing of a certain number of coffees to allow the machine to adjust the compactness of the ground coffee Attention should be given to spe cial blends which require grinder adjustments in order to optimize the extraction of the coffee see section Coffee Grinder Adjustment English 10 Coffee Grinder Adjustment Warning The grinder adjustment knob inside the coffee bean hopper must be turned only when the grinder is working Do not pour ground and or instant coffee into the coffee bean hopper Do not insert any material other than coffee beans into the hopp
7. cannot brew coffee e To brew coffee first drain a small amount of water Place a container under the steam wand Pannarello if supplied and turn the control dial clockwise to set it to the ewe Position Wait for the temperature fe light to be steady Then turn the control dial counter clockwise and set it back to the 4 position to stop dispensing Now follow the procedure described in the Coffee Brewing section to brew coffee 13 CLEANING AND MAINTENANCE General Cleaning Empty and clean the dregdrawer daily with the machine turned on Maintenance and cleaning operations can only be carried out when the ma chine is turned off and unplugged Do not immerse the machine in water Do not wash any of its parts in the dishwasher Do not use alcohol solvents and or abrasive objects to clean the machine Usea soft dampened cloth to clean the machine Do not dry the machine and or its components using a microwave and or standard oven After brewing milk beverages dispense hot water from the hot water steam wand Pannarello if supplied to obtain a thorough cleaning Every day after heating the milk remove the external part of the Pannarello if supplied and wash it with fresh drinking water Clean the hot water steam wand we ekly In order to do this perform the following operations Remove the external part of the Pannarello for standa
8. dispense 2 cups of coffee press the button twice In this operating mode the machine automatically grin 71 ds and doses the correct amount of coffee Brewing two coffees requires two grinding cycles and two brewing cycles automatically carried out by the machine this option is indicated by the w light being constantly on After the prebrewing cycle coffee be gins to dispense out of the dispensing spout Coffee brewing stops automatically when the pre programmed level is rea ched however it is possible to interrupt coffee brewing by pressing the button initially pressed The machine is adjusted to brew a true Italian espresso coffee This feature may slightly lengthen the brewing time allowing the intense flavor of the coffee to develop fully DISPENSING HOT WATER Warning Dispensing may be preceded by short sprays of hot water and scalding is possible The hot water steam wand may reach high temperatures Do not touch it with bare hands use the appropriate handle only e Before dispensing hot water check that the green temperature 77 light is steady on When the machine is ready proceed as follows e Place a container under the hot water steam wand Pannarello if supplied e Turn the control dial clockwise to set it to the g position e Fill the cup with hot water to the desi red level to stop hot water dispensing turn control dial counter clockwise back to th
9. example the following procedure describes the programming of the small coffee button wa which is normally associated with espresso coffee e Place a cup under the dispensing spout Press and hold down the wa button the gt light blinks during this phase Release the t gt button when the amount of coffee in the cup reaches the desired level At this point the button a gt is pro grammed each time it is pressed and released the machine will brew the same amount of coffee that was just program med Standby The machine is designed for energy sa ving After 60 minutes of inactivity the machi nes turns off automatically Note During the turning off phase the machine performs a rinse cycle if a coffee product has been brewed To turn the machine on again simply press the ON OFF button in this case the machine will go through the rinse cycle only if the boiler is cold Steady on Mic COFFEE BREWING Before brewing coffee make sure that the green tempe rature light a is steady on and that the water tank and the coffee hopper are full Leave the control dial on the coffee position 4 during the dispensing phase e Place 1 or 2 cups under the dispensing spout To brew coffee press and release the gt button for an espresso coffee the way button for a long coffee To dispense 1 cup of coffee press the button once To
10. the lever is in contact with the brew group Press the PUSH button to make sure that the brew group is in the correct position Lubricate the brew group after approximately 500 brewing cycles The brew group lubricant may be purchased through Saeco or authorized service centers Lubricate the brew group guides using the supplied lubricant only Apply the lubricant evenly on both side guides Insert the brew group in its seat until it locks into place WITHOUT pressing the PUSH button Insert the dregdrawer Close the service door DESCALING Limescale normally builds up with the use of the appliance The machine needs descaling every 1 2 months or whenever a reduction in water flow is noticed In case of conflict priority il must be given to what is indicated in the operation and main tenance manual over the instructions provided on separately sold accesso ries and materials Use the Saeco descaling pro duct Its formula has been designed to ensure better machine performance and operation for its whole operating life If correctly used italso avoids alterations in the brewed product Do not turn the machine off or putitin stand by mode during the descaling process Warning Never drink the descaling solution or any pro ducts dispensed until the cycle has been carried out to the end Never use vinegar as a descaling solution Before descaling remove the Pannarello if su
11. 10 Rinse the tank thoroughly and refill it with fresh drinking water 11 Empty the container used to collect the liquid dispensed by the machine 12 Place a container under the dispensing spout 13 Brew one coffee Press and release the T button The machine starts brewing coffee 14 Wait until brewing is complete and remove the container 15 Then repeat operations from step 7 to step 10 until the second water tank is empty 16 At the end fill the water tank again When descaling is complete insert the Pannarello if supplied onto the steam wand as described in the Cleaning and Maintenance section The descaling cycle is complete Then the products can be brewed The descaling solution must be disposed of according to the manufacturer s instructions and or regulations in force in the country of use Ifthe machine is switched off during the descaling cycle next time the machine is switched on the cycle must be repeated from the beginning MACHINE DISPOSAL The packing materials can be re cycled Appliance unplug the appliance and cut the power cord Deliver the appliance and power cord to a service center or public waste disposal facility This product complies with eu directive 2002 96 ec mt The symbol mmm on the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the ap plicable collecti
12. EC DECLARATION OF CONFORMITY YEAR 09 EC 2006 95 EC 2004 108 SAECO INTERNATIONAL GROUP S P A Via Torretta 240 40041 Gaggio Montano Bo Italy declare under our responsibility that the product AUTOMATIC COFFEE MAKER SUP 033R to which this declaration relates is in conformity with the following standards or other normative documents Safety of household and electrical appliances General requirements EN 60335 1 2002 A1 2004 A2 2006 A11 2004 A12 2006 A13 2008 Safety of household and electrical appliances Part 2 15 Particular requirements for appliances for heating liquids EN 60335 2 15 2002 A1 2005 A2 2008 Household and similar electrical appliances Electromagnetic fields methods or evaluation and measurement EN 62233 2008 Household and similar electrical appliances safety Part 2 14 Particular requirements for kitchen machines EN 60335 2 14 2006 A1 2008 Electromagnetic compatibility EMC Requirements for household appliances electric tools and similar apparatus Part 1 Emission EN 55014 1 2006 Electromagnetic compatibility EMC Part 3 Limits Section 2 Limits for harmonic current emissions equipment input current lt 16A for phase EN 61000 3 2 2006 Electromagnetic compatibility EMC Part 3 Limits Section 3 Limitation of voltage changes voltage fluctuations and flicker in public low voltage sup ply systems for equipment with rated current lt
13. Turn the control dial clockwise and set it back to the 4 position to stop dispensing steam Fill 1 3 of the container you wish to use to prepare the cappuccino with cold milk G i Use cold milk for better i 7 results when preparing a cappuccino Immerse the steam wand Pannarello if supplied in the milk to be heated and turn the control dial counter clockwise to set it to the position Froth the milk by gently swirling the cup and moving it up and down After dispensing steam for the desired time turn the control dial clockwise and set it back to the position to stop dispensing steam The same procedure can be used to heat other beverages After using the steam wand Pannarello if supplied wash it as described in the Cleaning and Maintenance section After using steam to prepare a beverage To brew a coffee Follow the procedu re described in section Steam Coffee Switchover to bring the machine back to the coffee brewing temperature To dispense hot water Follow the pro cedure described in section Dispensing Hot Water Ifthe control dial is left on the central position the machine in order to save energy automatically reaches the temperature needed to dispense coffee Steam Coffee Switchover After dispensing steam and pressing Wa or aw coffee button the fe light blinks quickly to show that the machine is overheated and
14. e 4 position The machine returns to the normal operating mode Occasionally after turning the control dial hot water may not be dispensed and the Jg light may blink slowly To obtain a flow of hot water simply wait until the i light stops blinking and re mains steady STEAM DISPENSING CAPPUCCINO BREWING Steam may be used to froth milk for a cappuccino as well as to reheat other beverages Warning Dispensing may be preceded by short sprays of hot water and scalding is possible The hot water steam wand may reach high temperatures Do not touch it with bare hands use the appropriate handle only Important Note Immediately after using the steam to froth the milk clean the steam wand or Pannarello when provided When the machine is ready brew a small amount of hot water in a glass and clean the wand or Pannarello when provided externally In this way all parts will be perfectly cleaned and free of any milk residue e Place a container under the hot water steam wand Pannarello if supplied When the machine is ready to brew coffee turn the control dial counter clockwise to set it onto the position Residual water may come out of the wand Pannarello if supplied The f light blinks during the prehea ting time required by the machine Steam dispensing will begin when the green light remains steady on soon after only steam will begin to come out e
15. ead the explanations of all the warnings displayed by the machine to the user by means of the lights on the control panel see section Control Panel Lights NEVER remove the drip tray when the machine is turned on Wait a couple of minutes after turning on off since the machine will carry out gt gt arinse self cleaning cycle see section a Rinse Self Cleaning Cycle Remove the water tank Rinse and fill it with fresh water ma F king sure that it is not filled exceeding the MAX level indicated in the water tank Put the water tank back in its seat to its limit stop Use only fresh non sparkling water to fill the tank Hot water or any other liquid may damage the tank and or the machine Do not turn on the machine when the tank is empty Make sure there is enough water in the tank Remove the coffee bean hopper lid Note The hopper may be fitted with different safety features according to the regula tions of the country of use of the machine Slowly pour the coffee beans into the hopper Only coffee beans must be put into the coffee bean hopper Ground coffee instant coffee or any other object may damage the 4 machine Replace the lid on the coffee bean hop per Insert the plug into the socket located on the back of the machine Insert the plug of the other end of the power cord into a wall socket with suitable power voltage e Make sure control dial i
16. er The grinder contains moving parts that may be dangerous Therefore do not insert fingers and SS or other objects Only adjust the grinder using the grinder adjustment key Turn off the machine by pressing the ON OFF button and remove the plug from the socket before carrying out any type of operation inside the coffee bean hopper Do not pour coffee beans when the coffee grinder is working SJ The machine lets you make slight J adjustments to the coffee grinder to adapt it to the kind of coffee used This adjustment should be carried out by adjusting the pin on the inside of the coffee bean hopper this pin must be pressed and turned only with the grinder adjustment key provided with the coffee _ machine Press and turn the pin one notch at a time You must brew 2 3 coffees before J you will taste a difference The reference marks inside the coffee bean hopper indicate the grind setting There are 5 different grind settings to cho ose from with the following references J 1 Coarse Grind 2 Fine Grind Adjusting the Brewed Coffee The machine allows you to adjust the amount of brewed coffee according to your taste and or the size of your cups Each time the wa or ay buttons are pressed and released the machine brews a pre set amount of coffee This amount may be reprogrammed to your taste Each button may be individually programmed for a specific brew setting As an
17. iance during operation Never clean with scrubbing powders or harsh cleaners Simply use a soft cloth dampened with water For optimal taste of your coffee use purified or bottled water Periodic descaling is still recommended every 2 3 months Do not use caramelized or flavored coffee beans INSTRUCTIONS FOR THE POWER SUPPLY CORD A short power supply cord or detachable power supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord Longer detachable power supply cords or extension cords are available and may used if care is exercised in their use If a long detachable power supply cord or extension cord is used 1 The marked electrical rating of the detachable power supply cord or extension cord should be at least as great as the electrical rating of the appliance 2 If the appliance is of the grounded type the extension cord should be a grounding type 3 wire cord and 3 The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over 4 GENERAL INFORMATION The coffee machine is suitable for preparing espresso coffees using whole coffee beans and is equipped with a device to dispense steam and hot water The machine is designed for domestic use and is not suitable for heavy or professional use Keep these operating instructions in a safe place and make them avai
18. lable to anyone who may use the coffee machine For further information or in case of problems that are not included or not completely explai ned in these instructions please contact the Saeco customer service or an authorized service center A Warning No liability is assumed for damage caused by Incorrect use not in accordance with the intended uses Repairs not carried out by authorized service centers e Tampering with the power cord Tampering with any part of the machine Storage or use of the machine at a temperature outside the operating temperature range 15 C 45 C Use of non original spare parts and accessories In these cases the warranty shall be deemed null and void SAFETY REGULATIONS Never allow water to come into contact with any of the electrical parts of the machine Danger of short circuit Steam and hot water may cause scalding Do not direct the steam or hot water jet towards body parts Carefully handle the steam hot water spout by means of the special handle Danger of scalding Intended Use The coffee machine is intended for domestic use only Do not make any technical changes or use the machine for unauthorized purposes since this would create serious hazards The appliance is not to be used by persons including children with reduced physical mental or sensory abilities or with limited experience and or expertise unless they are supervised by a person responsible for their safety o
19. ocket Allow for a minimum distance from the sides of the machine as shown in the illustration During machine turning on off it is recommended to place an empty glass under the di spensing spout Do not keep the machine at a temperature below 0 C 32 F Frost may damage the machine Do not use the coffee machine outdoors In order to prevent its housing from melting or being damaged do not place the machine on very hot surfaces or close to open flames Storing the Machine Cleaning Before cleaning the machine turn it off by pressing the ON OFF button then remove the plug from the socket Wait for the machine to cool down Never immerse the machine in water It is strictly forbidden to tamper with the internal parts of the machine Water left in the tank for several days should not be consumed Wash the tank and fill it with fresh drinking water If the machine is to remain inactive for a long time dispense water from the steam wand and carefully clean the Pannarello if supplied then turn it off and unplug it Store it in a dry place out of the reach of children Keep it protected from dust and dirt Repairs Maintenance In case of failure problems or a suspected fault resulting from the falling of the machine im mediately remove the plug from the socket Never attempt to operate a faulty machine Servicing and repairs may only be carried out by authorized service centers All liability for damages resulting from wo
20. on point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environ ment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product 16 CONTROL PANEL LIGHTS Light Signals A Steady on Slowly flashing Quickly flashing Slowly flashing z Steady on d i Steady on p Steady on im rr al U Blinking in counter dockwise direction cydical Flashing alternately ae 0 Flashing simultaneously Causes The machine has reached the right temperature and is now ready For coffee brewing For hot water dispensing For steam dispensing The machine is warming up to brew coffee and dispense hot water or steam Machine is overheating Coffee may not be brewed Indicates that the machine is programming the amount of coffee to brew see section Adjusting the Brewed Coffee The machine is brewing a double coffee Low water level The coffee bean hopper is empty Solutions The water must be drained into a container by turning the selector switch clockwise to the yp position until the green ready temperatu
21. pplied from the steam wand as de scribed in the Cleaning and Maintenance section Turn the machine on by pressing the ON OFF button Wait for the machine to finish its rinse and warm up process Warning Remove the Inten za filter before adding the descaling solution e Pour the entire content of the Saeco concentrated descaling solution into the water tank and then fill the tank with fresh drinking water up to the MAX level Place the tank back into the machine 1 Place a container under the steam wand 2 Only after adding the descaling solution in the tank turn the selector switch clockwise to the B position and dispense 2 3 cups of water approx 150 ml 3 Stop dispensing by turning the selector switch back to its central position 4 4 Let the descaling solution take effect for 10 minutes 5 Repeat steps 2 and 3 at intervals of 3 minutes until there is no descaling solution left in the water tank 6 When the light remains steady on rinse the tank thoroughly and refill it with fresh drinking water 156 7 Empty the container used to collect the liquid dispensed by the machine and place it under the steam wand 8 Turn the selector switch clockwise to the tw position The machine rinse cycle starts 9 When the water in the tank is finished the light remains steady on to indicate that the selector switch must be turned back to the position
22. r they are instructed by this person on how to properly use the machine Power Supply Power Cord Only connect the coffee machine to a suitable power socket The voltage must correspond to the indication on the machine label located on the inside of service door Never use the coffee machine if the power cord is defective or damaged If damaged the power cord must be replaced by the manufacturer or an authorized service center Do not pass the power cord around corners over sharp edges or over hot objects and keep it away from oil Do not use the power cord to carry or pull the coffee machine Do not pull out the plug by the power cord or touch it with wet hands Do not let the power cord hang freely from tables or shelves For the Safety of Others Keep children under control to prevent them from playing with the product Children are not aware of the risks related to electric household appliances Do not leave the machine packaging materials within the reach of children e 5 e Danger of Burns Never direct the jet of hot steam and or hot water towards yourself or others Danger of scal ding Always use the handles or knobs provided D English Machine Location Suitable Location for Operation and Maintenance For best use it is recommended to Choose a safe level surface where there will be no danger of overturning it or being inju red Choose a location that is sufficiently well lit clean and near an easily reachable s
23. rd cleaning Remove the upper part of the Panna rello from the wand Wash the upper part of the Pannarello with fresh drinking water Wash the wand with a wet cloth and remove any milk residue Replace the upper part in the wand make sure it is completely inserted Reassemble the external part of the Pannarello e Itis recommended to clean the water tank daily Remove the small white filter from the water tank and wash it under k running drinking water Reposition the small white filter in its housing by gently pressing and turning it at the same time Fill the water tank with fresh drinking water Empty and clean the drip tray daily Perform this operation also when the float is raised Brew Group The brew group should be cleaned every time the coffee bean hopper is filled or at least once a week Turn off the machine by pressing the ON OFF button and remove the plug from the socket Remove the dregdrawer Open the service door To remove the brew group pull it by the handle and press the PUSH button The brew group must be washed only with lukewarm water with no deter gent soap e Wash the brew group with lukewarm water carefully clean the upper filter and dry Thoroughly wash and dry all the parts of the brew group Thoroughly clean the inside of the machine Make sure that the two reference marks match up A Make sure that
24. re light JF stays constantly on After that stop dispensing water Fill the water tank with fresh drinking water After refilling the water tank the indicator light turns off Fill the hopper with coffee beans and start the procedure again The dregdrawer is full The water circuit is empty Brew group not inserted Dregdrawer not inserted Service door open Control dial is not in correct position The machine is performing the rinse self cleaning cycle A fault has occurred in the brew group A fault has occurred in the machine and hot water steam or coffee cannot be dispensed With the machine turned on empty the dregdrawer The dregdrawer must be emptied after every 8 coffee cycles If the dregdrawer is emptied with the machine turned off or when the indicator light is not illuminated the count of coffee cycles is not reset For this reason the indicator light to empty the dregdrawer may illuminate even when it is not full Fill the tank with fresh drinking water and prime the water circuit as described in Section Using the Machine for the First Time Make sure that all components have been correctly inserted and closed The blinking red light will now turn off The machine ends the cycle automatically You can interrupt the cycle by pressing either coffee button Try again to brew another coffee Turn the machine off After 30 seconds turn it back on Try this 2 or 3 times If the machine does
25. rk not carried out by professionals is declined Fire Safety Precautions In case of fire use carbon dioxide CO extinguishers Do not use water or dry powder extin guishers Pannarello optional only available for certain models Coffee bean hopper lid Brew group Small coffee button Double coffee light and brewed coffee length setting ina RO Warning light Control dial Temperature light ON OFF button Large coffee button Water tank level Grinder adjustment key light INSTALLATION For your safety and the safety of others carefully follow the instruc tions provided in the Safety Regula tions section Machine Packaging The original packaging has been designed and constructed to protect the machine during transport We recommend keeping the packaging material for possible future transport Preliminary Operations Remove the coffee bean hopper lid and the drip tray with grill from the packa ging Remove the coffee machine from the packaging and position it in a place that meets the requirements described in the Safety Regulations Place the drip tray with grill into its appropriate seat on the machine Make sure it is fully inserted to its limit stop Replace the coffee bean hopper lid Note Insert the plug into the socket only when indicated 2 and check that the ON OFF button is not pressed Important Note Carefully r
26. s on posi tion if this is not the case set it to that position Simply press the ON OFF button to turn the machine on the g4 light will begin to blink rapidly indicating that the water circuit must be primed Note Before starting the machine for the first time prime the water circuit Priming the Water Circuit e To prime the water circuit place a container under the hot water steam wand Turn the control dial clockwise to set it to the gp position and wait When water steadily comes out and the g4 light will blink slowly indicating that the knob can be turned off rotate the control dial counter clockwise to set it back to the 4 position At this point the F light begins to blink slowly indicating that the ma chine is in warm up mode When warm up is complete the machine performs a rinse cycle of the internal circuits e When the above steps are complete check that the ale light is on steady The machine is now ready for use To brew coffee dispense hot water or steam and for a proper use of the ma chine carefully follow the instructions provided ine Using the machine for the first time or after a long period of inactivity These simple operations will make it pos sible to always brew excellent coffee They have to be performed A At first start up B When the machine remains inactive for a long time more than 2 weeks Dispensed water m
27. ust be em ptied into an adequate drain It is not suitable for food use 1 Place a container under the dispensing spout 2 Before starting the procedure check that hef light is steady on 3 Brew one coffee Press and release the w gt button The machine starts brewing coffee 4 Wait until brewing is complete and remove the container 5 Placea container under the steam wand Pannarello if supplied 6 Turn the selector switch clockwise to the yg position 7 Dispense water until the no water signal is displayed The light re mains steady on Now turn the selector switch counter clockwise to set it back to the 4 po sition 8 At the end fill the water tank again Then the products can be brewed as described in the following sections Blinking Rinse Self Cleaning Cycle This cycle will rinse the internal circuits with fresh water The cycle is carried out At machine start with cold boiler After priming the water circuit with cold boiler During the standby preparation phase if a coffee product has been brewed During the turning off phase after pressing the ON OFF button if a coffee product has been brewed Note Before dispensing place a container beneath the dispensing spout A small amount of water will be dispensed which will rinse and heat all the machine components in this phase the indicator lights flash counter clockwise
28. ut The circuit is not primed Prime the circuit section Using the Machine for the First Time See note are event that occurs when the machine is automati Brew a few coffees as described in section Saeco Adapting Sys The coffee is too weak See note Coffee is brewed slowly See note Note These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed In this case cally adjusting the dose a tem The dispensing spout is dirty are event that occurs when the machine is automati cally adjusting the dose The coffee grind is too fine Clean the dispensing spout Brew a few coffees as described in section Saeco Adapting Sys tem Change coffee blend or adjust the grind as explained in section Coffee Grinder Adjustment The water circuit is not primed Prime the circuit section Using the Machine for the First Time The brew group is dirty Clean the brew group section Brew Group wait until the machine performs a self adjusting operation as described in section Saeco Adapting System Please contact customer service for any problems not covered in the above table or when the suggested solutions do not solve the pro blem TECHNICAL SPECIFICATIONS The manufacturer reserves the right to make changes to the technical specifications of the product Nominal Voltage Power Rating Power Supply
Download Pdf Manuals
Related Search