Home

Philips MCD139B DVD Micro Theater

1. is displayed for a few seconds Setting clock In standby or any source mode press and hold CLOCK on the remote gt The clock digits flash on the display panel gt If the clock has not been set flashes e 000 nour Press 44 P gt on the set repeatedly to set the minute Press and hold MODE on the front panel for more than 5 seconds to toggle between 12 hour and 24 hour display Press CLOCK again to store the setting gt The clock starts working Notes The clock setting will be erased when the system is disconnected from the power supply The system will exit clock setting mode if no button is pressed within 25 seconds To exit clock setting without storing press STOP on the system to exit Setting wake up timer The system can switch on to DISC or TUNER mode automatically at a preset time serving as an alarm to wake you up IMPORTANT Before setting the timer ensure that the clock is set correctly To set a new timer you need to deactivate the previously set timer In standby mode press and hold SLEEP TIMER on the remote for more than five seconds to enter timer setting mode Clock Timer gt The source and timer digits will be lighted on he display panel gt NOTIMER will be displayed briefly if wake up timer is not set Press DISC or TUNER to select the desired source Before setting timer make sure the music so
2. The subtitle file name has to be the same as the file name of the movie The subtitle can only be displayed up to an average of 45 characters Disc Operations Using the setup menu user preference settings This DVD setup is carried out via your TV set enabling you to customize the DVD System to suit your particular requirements SYSTEM MENU Ca ow In disc mode press SYSTEM MENU gt The setup will appear across the TV screen q clare e PHILIPS General Setup P Display Dim OSD Lang Screen Saver DivX R VOD Code Press 44 gt gt V A on the remote control to navigate in the menu Press OK to confirm your setting To remove the menu Press SYSTEM MENU Note Some of the features in the System Menu Options are described in Getting Started DVD Menu Operations Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected gt 4 3 panscan If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen gt 4 3 letterbox If you have a normal TV In this case a wide picture with black bands on the upper and lower portions of the TV screen will be displayed 16 9 If you have a wide screen TV Screen Saver This function is used to turn the screen saver on or off it feed aoa E PHILIPS General Setup Page Display Dim OSD Lang On D
3. TV has a colour system standard If the disc s or DVD system s colour system is different than your TV s colour system the picture may be distorted or colourless 35 Troubleshooting The aspect ratio of the screen cannot be changed even though you have set the TV shape No sound or distorted sound The micro DVD player does not start playback The DVD micro system does not respond when the buttons are pressed Cannot activate some features such as Subtitles or multi language Audio Radio reception is poor SENS NSN QS SN The aspect ratio is fixed on the DVD disc Depending on the TV it may not be possible to change the aspect ratio Adjust the volume Check that the speakers are connected correctly Replace the speaker cables Disconnect the headphones The system is in pause slow motion or fast forward reverse mode press I or gt H on the remote to resume normal play mode Insert a readable disc with the playback side facing down Check the disc type colour system and regional code Check for any scratches or smudges on the disc Press SYSTEM MENU to turn off the setup menu screen Cancel the parental control rating function or change the rating level Moisture has condensed inside the system Remove the disc and leave the system turned on for about an hour Disconnect the power plug from the outlet and insert again Multi language sound or subtitle is not recorded on the DV
4. Step 3 Setting language preference ae Setting the OSD Language csssesssescsssessseeese 20 Setting the Audio Subtitle and Disc Menu language EIE AE E EET 20 Basic Operations Switching the system on off Power saving automatic standby Volume control esssssesssessssesessseessseessseeesseeeeseeeese Sound Control DBB Dynamic Bass Boost DSC Digital Sound Control Disc Operations Playable Discs csssesssesstessessessesseessseesseessees Region Codes Playing discs Using the Disc Menu Playback control PBC Resuming playback Selecting and searching Selecting a different track chapter Fast forwarding reversing Slow forwarding reversing Different play modes REPEAT SHUFFLE and REPEAT ASB ssicecisciesscsssessasesensesesevassessossespsbyadteen es 24 Repeat A B Programming favourite chapters tracks Display information sccsesssssssesssessseesseessees Moving to another title chapter Viewing from another angle ZOOM AUDIO SUBTITLE Sinis srania Playing MP3 Picture disc Kodak JPEG MP3 JPEG Picture disc Playing MP3 music and JPEG pictures simultaneously Kodak Picture disc Playing a DivX disc DVD Menu Operations Using the setup menu user preference SEtt NgS oe eesceessesssessseesseesstessessessessesssessees Setting the TV Display Screen Saver Display Dim DivX R VOD Code DivX Subtitle
5. For VCDs Press AUDIO repeatedly to select the audio channel for sound output displayed on the TV screen STEREO MONO LEFT MONO RIGHT or MIX MONO SUBTITLE Press repeatedly SUBTITLE on the remote control to select different subtitle languages gt The feature is disc dependent 26 Playing MP3 Picture disc Kodak JPEG IMPORTANT You have to turn on your TV set and set to the correct Video In channel MP3 JPEG Picture disc Load an MP3 Picture JPEG disc gt The disc reading time may exceed 30 seconds due to complexity of the directory file configuration gt The disc menu appears on the TV Select a track in the menu and press OK to start playback MP3 disc menu PHILIPS MP3 Sample 102 During music playback press A Y or use the numeric keys 0 9 to select a desired picture file from the disc menu and press OK gt f the disc main menu contains various folders use A V to select a desired folder and press OK to open the folder Press I P to select previous next track O To stop simultaneous playback press DISC MENU followed by STOP If the MP3 menu is switched off While in playback mode press Mi or P to select the previous next track Note No album search function in menu off mode 6 During JPEG or Kodak Picture disc playback press PROG repeatedly to select different scan effect There are 12 types of
6. IMPORTANT Depending on the DVD or VIDEO CD some operations may be different or restricted Do not push on the disc tray or put any objects other than disc on the disc tray Doing so may cause the disc player malfunction If the inhibit icon appears on the TV screen when a button is pressed it means the function is not available on the current disc or at the current time Playable Discs Your DVD Player will play Digital Versatile Discs DVDs Video CDs VCDs Super Video CDs SVCDs Finalised DVD recordable DVD R Digital Versatile Discs Recordable DVD R Digital Versatile Discs Rewritable DVD R Audio Compact Discs CDs MP3 WMA discs picture Kodak JPEG files on CD R W ISO 9660 UDF format JPEG resolution support up to 3073x2048 Supported sampling frequencies 32kHz 44 1kHz 48kHz Supported Bit rates 32 256 kbps variable bit rates average 128kbps DivX files on CD R W DVD R W Divx 3 4 5 eye sco ET ice die eo pa dise dise wise tst Gom OSG ReWritable Se Region Codes DVD discs and players are designed with regional restrictions Before playing a disc make sure the disc is for the same region as your player The regional code for this unit is indicated at the bottom panel Note Ifyou are having trouble playing a certain disc remove the disc and try a different one I
7. Use the RF coaxial cable not supplied to connect the RF modulator to your TV s RF jack 12 Connections Step 4 Connecting the FM Step 6 Connecting aVCR or antenna cable satellite box Connect the supplied FM antenna to the FM 75 FRE dli r EER Q jack at the back of the main unit Extend the Viowineandilisteninsitojplaybac FM antenna and fix its end to the wall Step 5 Connecting the power cord IMPORTANT Never make or change any connection with the power switched on Left Speaker Connect the VCR or Cable Satellite Box to the TV system as shown DVD Player A Use the audio cables red white not supplied to AC power cord connect the system s AUX IN1 L R jacks to the AUDIO OUT jacks on the VCR or Cable Satellite box After everything is connected properly plug in arene the AC power cord to the power socket Before starting operation press AUX1 2 TV on the remote control to select AUX 1 in order to activate the input source 13 Connections Step 7 Connecting digital audio equipment till Digital audio recorder Recording digital Connect the system s COAXIAL OUT digital out jack to the DIGITAL IN jack on a digital recording device DTS Digital Theater System compatible with a Dolby Digital decoder for
8. example Before operation set COAXIAL OUTPUT according to the audio connection Step 8 Connecting portable audio player DVD player portable audio player Portable audio player MP3 Connect the system s AUX IN 2 jack to the HEADPHONE jack diameter 3 5mm on a portable audio player Before starting playback press AUX1 2 on the remote control to select AUX 2 in order to activate the input source The music will be heard through the speakers 0o00 OGG Controls on the system DBB enables or disables bass enhancement DSC selects different types of preset sound equalizer settings 3 TUNING lt 44 gt tunes to a radio station fast searches backward forward in a disc at different speeds Clock s s s Sts the minutes STANDBY ON 4 switches the system on or to Eco power standby standby mode gt t starts or interrupts disc playback SOURCE selects the respective sound source DISC TUNER FM AUX1 AUX2 K P DISC uss press to skip to the previous next chapter title track wu Selects a preset radio station sets the hours Tuner stops disc playback or erases a program Functional Overview OeE O iR Sensor point the remote control towards this sensor T OPEN CLOSE opens or closes the disc door PROGRAM Th program the favourite stations press and
9. pressing this button will restart playback from the first track Disc Operations Playback control PBC PBC playback allows you to play Video CD interactively following the menu on the display Press DISC MENU to toggle between PBC ON and PBC OFF Playing a disc with PBC function If PBC OFF the system will start playback automatically If PBC ON the PBC menu if available will appear on the TV screen for selection Use the numeric keys 0 9 to enter your choice Note This function is not available for DVD CD MP3 DivX disc Resuming playback During playback press W once to stop the playback in resume mode then press H to start playback from where you have stopped To cancel the resume mode In the stop position press lll again to fully stop the playback Or open the disc door or switch the system to standby mode Selecting and searching Selecting a different track chapter For DVD VCD CD MP3 During playback briefly press M PI to select the previous or nex track chapter Or use the Numeric Keypad 0 9 on the remote control to directly input your track number gt After selecting playback will automatically start from the beginning of the selected track Helpful hints Some VCDs have a single track so track selecting or an invalid input value for the current disc will be ignored If the player has been set to repeat chapter track pressing this button wil
10. hold to start automatic preset programming DISC ween program the favourite tracks MODE selects various repeat play modes For VCD with PBC feature PBC must be turned off VOLUME adjusts the volume upward downward 1 Display shows the current status of the DVD player Functional Overview p UY AB MODE CUfCK SLEEPMIMER CD CO eS C J SYSTEM MENU em JOGO Laz DISC MENU e OOWW O Q i RETURN Oe 09 Qo OO PHILIPS FC Remote control Oo switches the system to Eco power standby standby mode 2 SOURCE DISC TUNER AUX1 2 switches on the system selects the respective sound source for disc tuner aux1 2 QG A B repeats playback of a specific section within a chapter or a track SYSTEM MENU enters or exits the system menu MODE selects various repeat play modes For VCD with PBC feature PBC must be turned off 16 OK confirms a selection Vial lt p gt selects an item in a menu moves an enlarged picture up down left right lt lt gt gt DISC wesc fast Searches backward forward in a disc at different speeds TUNED tunes to a radio station Cloke sets the minutes AUDIO for VCD sets stereo mono left mono right or mix mono sound mode for DVD selects an audio language gt I starts or interrupts disc playba
11. Changing the password Restricting playback by setting parental level Rating explanations ccecsesecsssecsseesseeesseeeeses OSD language menu language Default Tuner Tuning to radio stations Storing preset radio stations Manual programming Autostore automatic programming Listening to preset radio stations Deleting a preset radio station Clock Timer Viewing clock 233 Setting clock 33 Setting wake up timer Setting sleep timer Specifications Troubleshooting ccce 35 37 Glossary once cseeesssssssesssesseseesceeeeetenceteeetee 38 Contents General Information Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Features Your DVD MICRO THEATRE System with 2 1 channel full analog amplifier creates the same dynamic sound qualities that you find in full fledged cinemas and incorporates some of the best features in home theater technology Other features include Additional Component Connections Lets you connect other audio and audio visual components to the DVD micro system Parental Control Rating Level Lets you set a ratings level so that your children cannot watch a DVD that has a rating higher than you set Sleep Wake up Timer Enables the system to switch on off automatically at a preset t
12. D Changing the language for the sound or subtitle is prohibited on the DVD The features may not be available on the disc If the signal is too weak adjust the antenna or connect an external antenna for better reception Increase the distance between the Mini HiFi System and your TV or VCR The timer is not working The Clock Timer setting is erased The remote control does not function Low hum or buzz sound Low bass response Unable to select Progressive Scan SS SENT SN Troubleshooting Set the clock correctly Power has been interrupted or the power cord has been disconnected Reset the clock timer Select the correct source DISC or AUX1 2 for example before pressing the function button Point the remote control at the remote sensor of the unit Reduce the distance to the player Remove any possible obstacles Replace the battery with new one Check that the battery is loaded correctly Place the DVD micro system as far away as possible from electrical devices such as speakers TV that may be causing interference Check all speakers for correct polarity Check that the output of the video signal is switched to Ypbpr 37 Glossary 38 Analog Sound that has not been turned into numbers Analog sound varies while digital sound has specific numerical values These jacks send audio through two channels the left and right Aspect ratio The ratio of vertical and horizontal size
13. DVD Micro Theatre MCD139B Register your product and get support at www philips com welcome User manual FA ait BA PHILIPS DO DOLBY CONSUMERS SHOULD NOTETHAT NOT ALL DIGITAL HIGH DEFINITION TELEVSION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories PICTURE IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOM jays HH Windows ENDED THAT THE USER SWITCH THE mm Mela CONNEC OTHE STANDARD DEFINITION Windows Media and the Windows logo are OUTPUT IF THERE ARE QUESTIONS REGARD trademarks or registered trademarks of NG OURTV SET COMPATIBILITY WITH THIS a oe in the United States and ODEL 525p AND 625p DVD PLAYER PLEASE Sp eee CONTACT OUR CUSTOMER SERVICE CENTER DivX Certified products DivX Certified and associated logos are trademarks of DivX Inc and are used under license This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovi
14. Place the system on a flat hard and stable surface The apparatus shall not be exposed to dripping or splashing Install the unit near the AC outlet and where the AC power plug can be easily reached Place the system in a location with adequate ventilation to prevent internal heat build up in your system Allow at least 10 cm 4 inches clearance from the rear and the top of the unit and 5 cm 2 inches from each side The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc Do not expose the system batteries or discs to excessive moisture rain sand or heat sources caused by heating equipment or direct sunlight o naked flame sources such as lighted candles should be placed on the apparatus o objects filled with liquids such as vases shall be placed on the apparatus f the system is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens of the disc unit inside the system Should this occur the CD player would not operate normally Leave the power on for about one hour with no disc in the system until normal playback is possible The mechanical parts of the set contain self lubricating bearings and must not be oiled or lubricated When the system is switched to Standby mode it is still consuming some power To disconnect the system from the power supply completely re
15. Press lt 44 gt gt V A on the remote control to 2 G General Audience recommended as navigate in the menu acceptable for viewers of all ages gt Move to Preference Page and press W 1 KID SAFE Kids material recommended v Move to Parental and press PP especially for children and viewers of all ages w a88 B PHILIPS OSD LANG menu language Preference Page To set the screen display language The default Audio i 3 g ites setting is English Disc Menu 1 Kid Safe Password 26 j Default a oll If RESET is selected all the items in the setup ay menu will be reset to default setting except 8Ad Parental Setting and Password Press W A to select a rating level between 1 8 and press OK gt DVDs rated above the level you select will not play unless you enter your six digit password or choose a higher level rating O Use the numeric keys 0 9 to enter the six digit code 31 Tuner Tuning to radio stations O Press repeatedly SOURCE or TUNER on the remote Press and hold TUNING lt 44 gt gt on the set to start tuning gt The frequency indication starts to change until a radio station with sufficient signal strength is found Repeat step 2 if necessary until you find the desired radio station To fine tune the reception of a weak station press lt 44 gt gt briefly and repeatedly until an optimal reception is found Storing preset radio stations You can prese
16. ck M A Tuner selects a preset radio station Disc skips to the previous next chapter title track Clock nsss SEtS the hours 0 m stops disc playback or erases a program G Numeric Keypad 0 9 inputs a track title chapter number of the disc 4 PROG Th program the favourite stations press and hold to start automatic preset programming PDISE asnasa program the favourite tracks 3 DISPLAY OSD displays the current status and or disc information CLOCK sets and views the cloc 5 SLEEP TIMER activates deactivates or selects the sleep timer activates deactivates or sets the wake up timer DISC MENU for DVD enters or exits disc contents menu forVCD SVCD toggle between PBC ON or OFF 4 MUTE disables or enables sound output VOL adjusts the volume upward downward TITLE RETURN for DVD go back to the previous menu forVCD in play mode go back to the PBC menu page ZOOM zoom in or out the picture DSC selects different types of preset sound equalizer settings 2 DBB enables or disables bass enhancement 3 SUBTITLE selects a subtitle language Notes for remote control First select the source you wish to control by pressing one of the source select keys on the remote control for example DISC TUNER Then select the desired function for example gt P
17. de or turn on interlaced mode refer to your TV user manual Press STANDBY ON to turn on the DVD player Select the correct Video Input channel In disc mode press SYSTEM MENU Press 44 gt gt V A keys on the remote control to navigate in the menu gt Move to Video Setup Page and press V gt Move to Progressive gt On and press OK Q GE Bsns Video Setup Pa TV Type PAL TV Display NTSC Component Read the notification message on the TV and confirm you action by selecting the OK in the menu and press OK There will be a distorted picture on your TV at this state until you turn on the progressive scan mode on your TV Turn on your TV progressive scan mode refer to your TV user manual 19 Getting Started In the confirmation menu press 44 gt gt to highlight OK in the menu and press OK on the remote to confirm gt Progressive scan is now set on TV screen comes to the system menu gt If distorted picture still appears it indicates that your TV doesn t support progressive scan In this case turn off progressive scan as described in To deactivate Progressive manually Press SYSTEM MENU on the remote to exit the system menu gt The setup is complete now and you can start enjoying the high quality picture To deactivate Progressive manually When the distorted sign still appears on the TV it may be because the connec
18. e Signal to Noise Ratio DVD Laser Type Semiconductor Disc Diameter 12cm 8cm Video Decoding MPEG 2 MPEG 1 Video DAC 12 Bits Signal System PAL NTSC Video Format 3 16 9 Video S N oe dB minimum Composite Video Output 1 0 Vp p 75 Q S Video Output Y 700Vp p 75 Q C 300 Vp p 75 Q 24 Bits 96 kHz Main unit Power Supply Rating i AEN 110 127V 220 240V 50 Hz 60Hz Power Consumption Eco power standby s s s ssssssissssisissssiisriissenesees lt 1 W Dimensions w x h x d 218 x 90 x 222 mm 550 x 314 x 330 mm n 9 7kg Impedance Speaker drivers a 3 fullrange Frequency response 80 Hz 20 kHz Package Dimension w Xh X d sasssssssssssssussnsst elvan Sa teeta 125 x 250 x 232 mm ama 2 4 kg left speaker 1 76 kg right speaker SUBWOOOFER Impedance Speaker driver Frequency response sss OOHZ 1K HZ Dimensions w x h x d 147 x 250 x 232 mm VNESE anire a A Na E a E 2 4kg 5 25 subwoofer Specifications and external appearance are subject to change without notice WARNING Troubleshooting Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable t
19. elpful hints Pressing and holding C on the remote can switch between Eco power standby and normal standby Power saving automatic standby As a power saving feature the system will automatically switch to Standby mode if you don t press any button within 15 minutes in the stop mode Basic Operations Volume control Press VOLUME or VOL on the remote to increase or decrease the volume level gt The display briefly shows value from D Pto 39 MIN or MAK is displayed when adjusted to the lowest or highest volume level mero WLIL and a volume To switch off the volume temporarily Press MUTE on the remote gt Playback will continue without sound and MUTE is displayed briefly To activate sound reproduction you can press MUTE again adjust the volume controls Sound Control DBB Dynamic Bass Boost DBB enhances the bass response Press DBB to enable or disable DBB feature gt f DBB is activated DBB ON will be shown gt If DBB is deactivated DBB OFF will be shown Helpful hints Some discs might be recorded in high modulation which causes a distortion at high volume If this occurs switch off DBB or reduce the volume DSC Digital Sound Control DSC provides a different type of preset sound equalizer setting Press DSC repeatedly to select CLASSIC default ROCK JAZZ POP 21 Disc Operations
20. he current track REPEAT FOLDER Plays all the tracks in the folder repeatedly SHUFFLE Random play REPEAT OFF Switchs off play mode To return to normal playback press MODE repeatedly until REPEAT OFF is displayed In shuffle playback mode Press P button to select another track in a shuffle order Press W to stop shuffle playback To cancel Shuffle mode Press MODE repeatedly to select repeat off to cancel Shuffle mode Notes In Tuner AUX 1 AUX2 mode this button does not function When the disc tray is opened Shuffle Repeat function will be cancelled automatically Repeat A B You can play a specific section in a chapter track repeatedly Press A B at your chosen start point Press A B again at your chosen end point gt The passage will now repeat continuously To resume normal play press A B again Note The A B function can only be set within the same chapter or track Programming favourite chapters tracks You can play the contents of the disc in the order you want For DVD VCD SVCD CD CDG Press PROG on the remote control gt The programming menu appears Program Track 01 16 04 Use the numeric keys 0 9 to input the track chapter number in the order you want two digits must be entered e g 06 gt If there are more than ten tracks to be programmed in total select NEXT on the screen and press OK or press BI on the remote con
21. hest channels and may be called FRONT A V IN or VIDEO See your TV manual for more details gt Or you may go to channel 1 on your TV then press the Channel up button repeatedly until you see the Video In channel gt Or the TV Remote Control may have a button or switch that chooses different video modes gt Or set the TV to channel 3 or 4 if you are using an RF modulator Selecting the color system that matches your TV set This DVD system is compatible with both NTSC and PAL For the playback of a DVD disc on this DVD system the color systems of the DVD TV set and DVD System should match Video Setup Page PAL TV Display NTSC Component Mult Progressive In disc mode press SYSTEM MENU Press 44 gt gt V A keys on the remote control to navigate in the menu gt Move to Video Setup Page and press V gt Move to TV TYPE and press PP PAL Select this if the connected TV set is PAL system It will change the video signal of an NTSC disc and output to PAL format NTSC Select this if the connected TV set is NTSC system It will change the video signal of a PAL video disc and output to NTSC system MULTI Select this if the connected TV set is compatible with both NTSC and PAL multi system The output format will be consistent with the video signal of the disc Select an item and press OK gt The screen messages for further setting confirmat
22. ic keys 0 9 to enter your current six digit code gt The password supplied by default is 000000 gt If you forget your existing password key in the super password 136900 Go to Password and enter you new code Then enter the same code again to confirm gt on ooo 200 E PHILIPS C E ma ok Press SYSTEM MENU again to remove the menu 30 DVD Menu Operations Restricting playback by setting parental an E oe eel a00 PHILIPS level Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc This feature lets you set a playback limitation level The rating levels are from 1 to 8 and are country specific You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with Press SYSTEM MENU again to remove the alternative scenes menu Rating explanations 8 ADULT material for adults only viewed only by adults due to graphic sexual scenes violence or language 7 NC 17 No children under age 17 not recommended for children under age 17 5 6 PG R Parental Guidance Restricted recommended that parents restrict children under 17 from viewing or allow them to view only when supervised by a parent or adult guardian 4 PG 13 Material is unsuitable for children under age 13 3 PG Parental Guidance suggested In disc mode press SYSTEM MENU
23. ime Progressive Scan Provides high quality flicker free images for film based sources When a picture refreshes its vertical resolution can double to 525 lines Note To fully enjoy the progressive scan feature you need a progressive scan TV Supplied accessories Remote control with one CR2025 battery Two speakers and one subwoofer DIN cable Composite video cable yellow FM wire antenna User Manual and Quick Start Guide If any item is damaged or missing contact your retailer or Philips Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialised company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment General Information Safety information Before operating the system check that the operating voltage indicated on the typeplate or the voltage indication beside the voltage selector of your system is identical with the voltage of your local power supply If not please consult your dealer Where the MAINS plug or an appliance coupler is used as the disconnet device the disconnect device shall remain readily operable
24. ion may appear Follow the on screen instructions to proceed to confirm the setting or not To remove the menu Press SYSTEM MENU Component Setting Component selection enables you to choose the type of video output suitable for your DVD system In disc mode press SYSTEM MENU Press 44 gt gt V A keys on the remote control to navigate in the menu gt Move to Video Setup Page and press V gt Move to Component and press PP YUV Select YUV if you have connected the Pr Pb Y output to your TV using Pr Pb Y jack S VIDEO Select S VIDEO if you have connected the S VIDEO output to your TV using S VIDEO jack o0 Select an item and press OK To remove the menu Press SYSTEM MENU o 2 4 53 63 Getting Started Setting up Progressive Scan feature for Progressive Scan TV only The progressive scan display twice the number of frames per seconds than interlaced scanning ordinary normal TV system With nearly double the number of lines progressive scan offers higher picture resolution and quality IMPORTANT Before enabling the progressive scan feature you must ensure Your TV can accept progressive signals a progressive scan TV is required 2 You have connected the DVD player to your TV using Y Pb Pr see Connecting TV set 3 Make sure Component has been set to YUV Turn on your TV Turn off your TV progressive scan mo
25. ivX R VOD Code 0 gt ON In STOP or tray open mode if no actions are performed about 5 minutes the screen saver will be activated gt OFF Screen saver is disabled 29 DVD Menu Operations Select the brightness of this unit s display panel Changing the password You can change the six digit code used as gt 100 Full brightness rassword gt 70 Medium brightness gt 40 Dimmest display This switches off all LEDs and icons on the front display panel of this unit DivX R VOD Code Philips provides you with the DivX R VOD registration code that allows you to rent or purchase videos from DivX R VODE service at www divx com vod All the downloaded videos from DivX R VOD can only be displayed back on this unit O indi d SYSTEM MENU Press B to see the registration code and press eves eee OK to exit DivX Subtitle Select the font type that supports the recorded DivX subtitle Press 44 gt gt Y A on the remote control to navigate in the menu gt Move to Preference page and paress V gt Move to Password and press PP gt Move to Change and press OK e3 aaa Ea PHILIPS Preference Page gt Standard Display a standard list of Roman subtitle fonts provided by this unit gt Central Europe Display Central Europe Audio Subtitle fonts Disc Menu PTT ae Parental gt Cyrillic Display Cyrillic font DivX Subtitle Default Use the numer
26. l Functional Overview Getting Started Step 1 Using Remote Control IMPORTANT Before using the remote control remove the insulation plastic tab as shown in the picture below Ifthe remote control does not function correctly or the operating range is reduced replace the battery with a new CR2025 battery Remove the insulation plastic tab Push to open the battery tray 2 Replace a new battery according to the indicated polarity Push the battery tray back to close it Using the Remote Control to operate the Player Aim the Remote Control directly at the remote sensor IR on the front panel Select the source you wish to control by pressing one of the ps source select buttons on the i remote Then select the desired function for example gt H K or P CAUTION Remove the battery if it is exhausted or if the Remote Control is not being used for a long time Batteries contain chemical substances so they should be disposed of properly 18 Step 2 Setting up the TV IMPORTANT Make sure you have completed all the necessary connections See Connecting TV Switch the DVD system on and then select DISC source See Switching the system on off Turn on the TV and set to the correct video in channel You should see the blue Philips DVD background screen on the TV gt Usually these channels are between the lowest and hig
27. l replay the same chapter track from its beginning 23 Disc Operations 24 Fast forwarding reversing For DVD VCD DivX WMAIMP3 During playback press lt 4 gt gt repeatedly to select fast search speed in forward FF or reverse FR playback To resume to normal playback press H Or press 44 gt gt repeatedly until P is displayed on the TV screen Helpful hints Fast searching forward backward is available only within the same track Slow forwarding reversing For DVD VCD During playback press A W repeatedly to select slow search speed in forward SF or reverse SR playback To resume to normal playback press H Or press A W repeatedly until P is displayed on the TV screen Helpful hints For VCD slow reverse is unavailable Different play modes REPEAT SHUFFLE and REPEAT A B REPEAT For DVDs VCD CD MP3 During playback press repeatedly MODE on the system to choose desired repeat play modes ForVCD with PBC feature PBC must be turned off first For DVDs CHAPTER REPEAT Repeats the current chapter TITLE REPEAT Repeats the current title REPEAT ALL Plays all the content repeatedly SHUFFLE Random play REPEAT OFF Switches off play mode For VCDs SVCDs CDs REPEAT TRACK Repeats the current track REPEAT ALL Plays all the tracks repeatedly SHUFFLE Random play REPEAT OFF Switchs off play mode For MP3 WMAJ JPEG DivX REPEAT ONE Repeats t
28. le when usingY Pb Pr and a progressive scan TV is required Ifyou are using a Progressive Scan TV TV must indicate Progressive Scan or ProScan capability to activate TV Progressive Scan please refer to your TV user manual For DVD system s Progressive Scan function see Getting Started Setting up Progressive Scan feature If your TV does not support Progressive Scan you will not be able to view the picture Turn off progressive scan in PROGRESSIVE menu of the system setup menu 11 Connections Using S Video In jack 4 Using an accessory RF modulator IMPORTANT If your TV set only has a single Antenna In jack or labeled as 75 ohm or RF In you will need a RF modulator in order to view the DVD playback via TV See your electronics retailer or contact Philips for details on RF modulator availability and operations RF coaxial cable to TV Use the S Video cable not supplied to connect the system s S VIDEO jack to the S Video Sea input jack or labeled as Y C or S VHS on the TV set To listen to TV channels through this system use the audio cables white red not supplied to connect AUX IN1 L R jacks to the Use the supplied composite cable yellow to corresponding AUDIO OUT jacks on the TV set connect the system s COMPOSITE VIDEO jack to the video input jack on the RF modulator
29. move the AC power plug from the wall socket Maintenance When a disc becomes dirty 4 o clean it with a cleaning cloth 5 Wipe the disc from the center o out in a straight line Do not expose the player batteries or discs to humidity rain sand or excessive heat caused by heating equipment or direct sunlight Always keep the disc tray closed to avoid dust on the lens Do not use solvents such as benzene thinner commercially available cleaners or anti static spray intended for colour discs The lens may cloud over when the player is suddenly moved from cold to warm surroundings making it impossible to play a disc Leave the player in the warm environment until the moisture evaporates Connections 10 Step 1 Placing speakers and subwoofer speaker speaker left a right TV VIEWING For best possible surround sound locate your speakers and subwoofer as follows Place the left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position Place the subwoofer on the floor Notes To avoid magnetic interference position the speakers subwoofer as far as possible from the main unit TV set or other radiation source Allow adequate ventilation around the DVD System IMPORTANT The type plate is located on the bottom of the system To avoid overheating of the system a safety circuit has been b
30. mproper formatted disc will not play on this DVD Player Playing discs For DVDs and VCDs make sure that the system is properly connected to your TV See Connecting a TV and your TV is turned on and set to video in channel See Setting up the TV Press SOURCE on the system once or more to select DVD mode or DISC on the remote control gt You should see the blue Philips DVD background screen on the TV Push OPEN CLOSE on the top of the system o open the disc tray nsert a disc with the print side facing up and close the disc tray Playback will start automatically depending on he disc type gt Ifa disc menu appears on the TV see Using he Disc Menu gt f the disc is locked by parental control you must enter your six digit password See Changing the password To interrupt playback Press gt H gt IE is displayed on the TV screen To resume playback press I again To stop playback Press W Using the Disc Menu Press DISC MENU on the remote control gt f the current title has a menu the menu will appear on the screen Otherwise the disc menu will be displayed Press 44 gt gt W A to select the desired title or chapter and then press gt IH or OK gt Playback starts from the selected title or chapter Press DISC MENU on the remote control to go to disc menu of the disc Note If no title menu or root menu is recorded in the DVD disc
31. o remedy a problem by following these hints consult your dealer or Philips for help Problem Solution No power Vv Vv No picture Vv Y Y Y Y Distorted or poor picture v Y Y Completely distorted picture or black white picture Check if the AC power cord is properly connected Press STANDBY ON on the DVD System or source buttons on the remote to turn on the power Check if the TV is switched on Check the video connection Press SOURCE on the DVD player repeatedly to select DVD or press DISC on the remote Set your TV to the correct Video In channel This channel is usually near channel 00 Or you may have a button on the TV remote control that selects Auxiliary or A V IN channel See your TV owner s manual for details Or change channels at the TV until you see DVD screen on the TV If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly see Getting Started Setting up Progressive Scan feature for Progressive Scan TV only for proper progressive scan setup or deactivate the progressive scan feature as below 1 Turn off your TV progressive scan mode or turn on to interlaced mode 2 Select OFF in PROGRESSIVE menu of system setup menu to turn off progressive then press SYSTEM MENU to exit the menu Sometimes a small amount of picture distortion may appear This is not a malfunction Clean the disc
32. rol to display the message of title and chapter Use Ato highlight an item and press OK Use numeric keys 0 9 to select a desired title chapter number Press DISPLAY OSD to exit the disc information menu Note Selecting a title or chapter might not be possible on certain discs Viewing from another angle If the playing DVD disc is recorded with multiple camera angles this function allows you to view the picture from different angles Angle selection is determined by the disc format 25 Disc Operations Press DISPLAY OSD on the remote control to display the message of title and chapter Use V Ato highlight Angle and press OK Use numeric keys 0 9 to select desired angle ZOOM Zooming allows you to enlarge the video JPEG image during playback For DVDs VCDs Press ZOOM repeatedly to change the zooming scale ZOOM X 2 gt ZOOM X 3 gt ZOOM X 4 gt ZOOM X 1 2 gt ZOOM X 1 3 gt ZOOM X 1 4 gt ZOOM OFF For JPEG Press ZOOM repeatedly to change the zooming scale ZOOM X100 gt ZOOM X 125 gt ZOOM X 150 gt ZOOM X 200 gt ZOOM X 75 gt ZOOM X 50 gt ZOOM OFF To pan through the enlarged image press lt 4 gt gt A buttons Press ZOOM repeatedly to exit ZOOM mode AUDIO For DVDs On the remote control press AUDIO repeatedly to select the desired language for sound track gt The feature is disc dependant
33. s of a displayed image The horizontal vs vertical ratio of conventional TVs is 4 3 and that of wide screens is 16 9 AUDIO OUT Jacks Jacks on the back of the DVD System that send audio to another system TV set Stereo etc Bit Rate The amount of data used to hold a given length of music measured in kilobits per second or kbps Or the speed at which you record Generally the higher the bit rate the better the sound quality However higher bit rates use more space on a Disc Chapter Sections of a picture or a music piece on a DVD that are smaller than titles A title is composed of several chapters Each chapter is assigned a chapter number enabling you to locate the chapter you want Component Video Out Jacks Jacks on the back of the DVD System that send high quality video to a TV set that has Component Video In jacks R G B Y Pb Pr etc Disc menu A screen display prepared for the selection of images sound subtitles multi angles etc recorded on a DVD Digital Sound that has been converted into numerical values Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks These jacks send audio through multiple channels instead of just two channels as analog does Dolby Digital A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio front left and right surround left and right and center JPEG A still pict
34. scan effect for selection The selected scan effect will be displayed on the TV screen Playing MP3 music and JPEG pictures simultaneously You can create a musical slide show if the disc contains both the MP3 music and JPEG picture files Insert a MP3 WMA disc that contains music and pictures Select a track in the menu and press OK to start playback During music playback press W A keys to select a desired picture file from the disc menu and press OK gt The picture files will be played back through to the end of the folder gt The music keeps playing back and will be repeated when reaching the end of the selected album playlist or track O To stop simultaneous playback press DISC MENU followed by STOP 27 57 Disc Operations Kodak Picture disc Load a Kodak Picture disc gt The disc reading time may exceed 30 seconds due to complexity of the directory file configuration During playback press W gt 12 thumbnail pictures will appear on the TV screen example for picture disc menu Slide Show E GO Next J gt Press Md PI to view available he previous next page if Press lt 44 gt gt V A to move within the menu and press OK to select the desired picture to play Press PROG to select the slide show mode During playback you can Press I orP to select another title picture in he current folder Press 44 gt gt A V onthe remo
35. sing Video In jack CVBS a Use the supplied composite video cable yellow to connect the system s COMPOSITE VIDEO jack to the video input jack or labeled as A V In Video In Composite or Baseband on the TV set To listen to TV channels through this system use the audio cables white red not supplied to connect AUX IN1 L R jacks to the corresponding AUDIO OUT jacks on the TV set Using Headphone jack Connections To listen to TV channels through this system use the audio cables white red not supplied to connect AUX IN1 L R jacks to the HEADPHONE jacks on the TV set with a 3 5mm diameter stereo jack Before starting operation press AUX1 2 TV on the remote control to select AUX 1 in order to activate the input source Using component Video In jack Pr Pb Y Use the component video cables red blue green not supplied to connect the system s PR PB Y jacks to the corresponding Component video input jacks or labeled as Pr Cr Pb Cb Y or YUV on the TV set To listen to TV channels through this system use the audio cables white red not supplied to connect AUX IN1 L R jacks to the corresponding AUDIO OUT jacks on the TV set Notes for progressive scan video The progressive scan video quality is only possib
36. sion Corporation Reserve engineering or disassembly is prohibited Windows Media is a trademark of Microsoft Corporation Contents General Information Features Supplied accessories Environmental information Safety information Maintenance 0 0 CE CO Connections Step 1 Placing speakers and subwoofer 10 Step 2 Connecting speakers and subwoofer 10 Step 3 Connecting TV set Using Video In jack CVBS Using Headphone jack Using component Video In jack Pr Pb Y Using S Video In jack vee Using an accessory RF modulator Step 4 Connecting the FM antenna ae Step 5 Connecting the power cord 13 Step 6 Connecting a VCR or cable satellite box Viewing and listening to playback Step 7 Connecting digital audio equipment 14 Recording digital sss 14 Step 8 Connecting portable audio player 14 Portable audio player MP3 sssssssssssesssessseeeese 14 Functional Overview Controls on the system cessessesseesseesseesseeee 15 Remote control sssssssssssssssessessssseessessssssssssss 16 17 Getting Started Step 1 Using the Remote Control 18 Using the remote control to operate the Player Step 2 Setting up the TV 18 20 Selecting the color system that matches your TV Component Setting Setting up Progressive Scan feature To deactivate Progressive manually
37. sive format for connection to a progressive display It dramatically increases the vertical resolution A progressive scan TV set is needed to receive progressive scan output from the system Region code A system allowing discs to be played only in preset regions This unit will only play discs that have compatible region codes You can find the region code of your unit from the product label Some discs are compatible with more than one region or ALL regions S Video Produces a clear picture by sending separate signals for luminance and the color You can use S Video only if your TV set has S Video In jack Sampling Frequency Frequency of data sampling when analog data is converted to digital data Sampling frequency numerically represents how many times the original analog signal is sampled per second Surround A system for users to create realistic three dimensional sound fields full of realism by arranging multiple speakers around he listener Title The longest section of a picture or music feature on DVD music etc in video software or he entire album in audio software Each title is assigned a title number enabling you to locate he title you want VIDEO OUT jack Jack on the back of the DVD System that sends video to TV ESE Meet Philips at the Internet http www philips com y aG CLASS 1 LASER PRODUCT Printed in China PDCC JS JW 0745
38. t up to 40 FM stations regardless of the reception Manual programming Tune to your desired radio station refer to Tuning to radio stations Press PROG Press ld P keys to select a preset number that y P you want to store the current radio station Press PROG to store 32 Autostore automatic programming Autostore automatically starts programming radio stations from preset 1 Any previous presets e g manually programmed will be erased In tuner mode press amp hold PROG until START appears on the display panel gt All previously stored radio stations will be replaced Listening to preset radio stations In tuner mode press I P to select the desired preset radio stations gt The preset number radio frequency and waveband are displayed Deleting a preset radio station In tuner mode press jl PI to select a preset radio station Press and hold W until DELETED appears gt The radio station continues to play but has been deleted from the preset list gt The rest of the preset radio stations remain unchanged Press PI on the set repeatedly to set the Viewing clock The clock if it is set will be shown in standby mode To view the clock in any source mode DISC or TUNER for example or Eco power standby mode Press briefly CLOCK on the remote gt The clock is displayed for a few seconds gt If the clock has not been set
39. te control to rotate or flip the picture files Press ZOOM repeatedly to zoom the picture in and out Press PII to pause resume playback Notes Due to the recording nature of Digital Audio MP3 DAM only digital audio music will play It is normal to experience an occasional skip while you are listening to your MP3 discs For multi session discs with different formats only the first session can be read and played 27 Playing a DivX disc The unit supports the playback of DivX movies which you can copy from your computer onto a recordable disc See DVD Menu Operations DivX R VOD Code for details nsert a DivX disc Use lt 44 gt gt V A keys to navigate to the title you want to play Press OK to start playback 28 During playback f the DivX disc has multilingual subtitles you can press SUBTITLE on the remote control to change the subtitle language f the DivX disc has different audio tracks you can press AUDIO on the remote control to change the audio stream Press 44 gt gt keys on the remote control to perform fast reverse and forward Press DISPLAY OSD repeatedly until the time search menu appears key in he time where playback should start gt Playback skips to the time entered Helpful Hints Subtitle files with the following file name extensions srt smi sub ssa ass are supported but do not appear on the file navigation menu
40. ted TV does not accept progressive signals and progressive is set by mistake You must reset the unit to interlace format Tum off your TV progressive scan mode or turn on to interlaced mode refer to your TV user manual Tum off progressive scan by selecting OFF under PROGRESSIVE menu then press SYSTEM MENU on the remote to exit the system menu To turn off progressive scan you may also first press OPEN CLOSE to open the disc door then press 44 and AUDIO on the remote control gt Progressive scan is turned off Step 3 Setting language preference You can select your own preferred language settings This DVD system will automatically switch to the selected language whenever you load a disc If the language selected is not available on the disc the disc s default language will be used instead The OSD language in the system menu will remain once selected 20 Setting the OSD Language in disc mode stop playback and press SYSTEM MENU Press 44 gt gt V A keys on the remote control to navigate in the menu gt Move to General Setup Page and press V gt Move to OSD Lang and press PP Press 44 PP to select a language and press OK To remove the menu Press SYSTEM MENU Setting the Audio Subtitle and Disc Menu language Preference P oO 0D B PHILIPS Audio Subtitle Disc Menu Parental Password DivX Subtitle Default in disc mode s
41. top playback and press SYSTEM MENU Press 44 gt gt V A keys on the remote control to navigate in the menu gt Move to Preference Page and press W gt Move to one of the following and press PP Audio disc s soundtrack Subtitle disc s subtitles Disc Menu disc s menu Press W A to select a language and press OK To remove the menu Press SYSTEM MENU IMPORTANT Before you operate the system complete the connection procedures When the system is switched to Standby mode it is still consuming power To disconnect the system from the power supply completely reomve the AC power plug from the wall socket Switching the system on off In standby Eco power standby mode press STANDBY ON ECO POWER or SOURCE on the set or DISC AUX1 2 TV or TUNER on the remote to switch on the e system gt POWER ON is displayed briefly gt The system will switch to the selected or last selected source To switch the system to Eco power standby mode In power on mode press briefly STANDBY ONC on the remote gt ECO POWER is displayed briefly gt Eco power lamp C on the front panel will light up gt The LCD display will go blank To switch the system to standby mode In power on mode press and hold STANDBY ONC on the remote gt The clock time will be displayed Or will be displayed if clock time is not set H
42. trol to access the next programming page gt To remove the track chapter from the programming menu select the track chapter and press OK Select Start to play the program gt To stop playback press W once To exit the program mode press W twice For MP3 WMA JPEG Press Y A to select a track picture on the disc menu Then press PROG to add the track picture to playlist gt Add To Playlist will show on the disc menu Press DISC MENU three times gt playlist menu will appear Press W A to select a track picture on the disc menu Then press PROG to add the track picture to playlist Press W A to select a track picture and press OK to start playback gt You can select a track picture and press PROG to remove it from programme playlist Press STOP to stop program playback Press DISC MENU return to disc menu Disc Operations Notes At most 20 tracks can be stored for DVD VCD SVCD CD CDG At most 100 tracks can be stored for MP3 WMAIJPEG Display information In disc mode press DISPLAY OSD repeatedly to select the following display information Oo Menu Bitrate 75 III Total Elapsed 0 55 11 Moving to another title chapter Some discs may contain more than one title or chapter If the disc has a title or chapter menu recorded on it you can start playback from the selected item Press DISPLAY OSD on the remote cont
43. uilt in Therefore your system may switch to Standby mode automatically under extreme conditions If this happens let the system cool down before reusing it Step 2 Connecting speakers and subwoofer Subwoofer DVD player Connect the supplied DIN cable to DVD player s DIN jack and the left speaker s DIN jack Connect the supplied speaker wires of the right speaker to SPEAKER RIGHT on the left speaker red wire to red jack black wire to black jack Fully insert the stripped portion of the speaker wire into the terminal as shown ot Lm SS Connect the supplied speaker wire of the subwoofer to SUBWOOFER OUT on the left speaker green wire to green jack white wire to white jack Notes For optimal sound performance use the supplied speakers Do not connect more than one speaker to any one pair of speaker terminals Do not connect speakers with an impedance lower than the speakers supplied Please refer to the SPECIFICATIONS section of this manual Step 3 Connecting TV set IMPORTANT You only need to make one video connection from the following options according to the capabilities of yourTV system S Video or Component Video connection provides higher picture quality These options must be available on your TV set Connect the system directly to the TV set U
44. urce has been prepared DISC load the disc TUNER tune to the desired radio station Press Pl repeatedly to set the hour Press 44 gt gt repeatedly to set the minute Press SLEEP TIMER to store the time At the preset time the selected source will play To deactivate the wake up timer In standby mode press and hold SLEEP TIMER until TIMER OFF is displayed on the panel Notes The system will exit timer setting mode if no button is pressed within 25 seconds Display shows t if activated and disappears if deactivated Setting sleep timer The sleep timer enables the system to switch off by itself after a set period of time Press SLEEP TIMER on the remote control repeatedly to select a preset time gt The selections are as follows time in minutes Tes an 5 eni m m gt i20 Press SLEEP TIMER until you reach the desired length of time IT m7 4g gt OT To deactivate the sleep timer Press SLEEP TIMER repeatedly until OFF is displayed or press the STANDBY ON button 33 Specifications 34 AMPLIFIER Output power L R speakers 25 W channel RMS Subwoofer ssssssssssstsnesstssstnstisensnessensein 50 W RMS Speaker channel a Responsen aomena omaa 180Hz 18 kHz 3 dB gt 62dB A weighted Signal to Noise Ratio Input Sensitivity AIXA seie oar ceefers erie apo 800mV AUXIN Zor TV eaaa a 1000mV TUNER Tuning Rang
45. ure data compression system proposed by the Joint Photographic Expert Group which features small decrease in image quality in spite of its high compression ratio MP3 A file format with a sound data compression system MPE is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 Through the MP3 format one CD R or CD RW can contain about 10 times as much data volume as a regular CD can Multichannel DVD is specified to have all sound tracks constitute one sound field Multichannel refers to a structure of sound tracks having three or more channels Parental control A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country The limitation varies from disc to disc when it is activated playback will be prohibited if the software s level is higher than the user set level PCM Pulse Code Modulation A system for converting analog sound signal to digital signal for later processing without data compression Playback control PBC Refers to the signal recorded on video CDs or SVCDs for reproduction control By using screen menus recorded on aVideo CD or SVCD that supports PBC you can enjoy interactive type software as well as software having a search function Progressive Scan P Scan It displays all the horizontal lines of a picture at one time as a signal frame This system can convert interlaced video from DVD into progres

Philips MCD139B DVD Micro Theater

Contents

Download Pdf Manuals

Related Search

Related Contents