Nokia CK-15W
Contents
1. with external antenna gain not exceeding 3 dBi 30 Installation E Check the operation of the car kit After the car kit has been installed check that it is working and mounted properly See also Troubleshooting p 21 31 Care and maintenance Care and maintenance Your car kit is a product of superior design and craftmanship and should be treated with care The following suggestions will help you protect your warranty coverage e Keep the car kit dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits e Do not use or store the car kit in dusty dirty areas Its moving parts and electronic components can be damaged e Do not attempt to open the car kit e Do not use harsh chemicals cleaning solvents or strong detergents to clean the car kit parts e Do not paint the car kit parts Paint can clog the moving parts and prevent proper operation If the car kit is not working properly take the defective part to your nearest authorized service facility for service 32 Additional safety information Additional safety information E Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems electronic antiskid antilock braking systems electronic speed control systems and air bag systems For more information check with the manufacturer or2. device or Get started press the Navi wheel in the standby mode and select B uetooth gt Active device gt Disconnect You do not need to delete the pairing with the car kit to disconnect it Clear the list of paired devices The car kit saves the pairing information about the last eight Bluetooth devices that have been paired with it To clear this information reset the car kit to the factory settings press the Navi wheel in the standby mode and select Settings gt Restore factory settings 14 Call functions 3 Call functions WE Adjust the loudspeaker volume To adjust the volume during a call or when a call is alerting turn the Navi wheel to left to decrease the volume or to right to increase it When you change the volume the horizontal bar at the top of the display moves accordingly To save the volume press the Navi wheel when Save volume is displayed To set the volume to silent press t in the standby mode or when you receive a call To restore the original volume press IF E Make a call To enter a phone number turn the Navi wheel to left in the standby mode Scroll to the first digit of the phone number and press the Navi wheel Select the other digits of the phone number in the same way To delete the most recent digit press Once the phone number is displayed press g to call it To end the call or cancel the call attempt press N To search for a contact from Contacts see Sear
3. free to operate the vehicle while driving Your first consideration while driving should be road safety INTERFERENCE All wireless devices may be susceptible to interference which could affect performance SWITCH OFF WHEN REFUELING Do not use the device at a refueling point Do not use near fuel or chemicals SWITCH OFF NEAR BLASTING Follow any restrictions Do not use the device where blasting is in progress QUALIFIED SERVICE Only qualified personnel may install or repair this product ENHANCEMENTS Use only approved enhancements Do not connect incompatible products CONNECTING TO OTHER DEVICES When connecting to any other device read its user guide for detailed safety instructions Do not connect incompatible products Quick start Quick start This section briefly describes the basic features of the car kit For details refer to the respective sections in this guide E The input device Microphone mute key 1 Press to set the car kit volume to silent in the standby mode or when you receive a call Press to mute or unmute the microphone during a call Press and hold to switch an active call from the car kit to the compatible mobile device connected to it Voice dialing key 2 Press to activate voice dialing with a compatible mobile device when you are not ina call Call key 3 Press to make or answer a call or to switch between an active call and a call on hold Press to view the list o
4. prevent accidental draining of the car battery 4 Connect the red wire to the positive terminal of the 12 V car battery using the supplied 2 A fuse 5 Plug the four pin plug of the power cable into the dc power connector of the hands free unit E Optional enhancements You can extend the features of the car kit with optional enhancements Consult your dealer or service technician for suitable enhancements for the car kit Use only approved and compatible enhancements Mobile holder To use your mobile device in a car you can mount a mobile holder designed for the device If the display of a mobile device is to be used ensure the device is mounted in a holder and that the device display is clearly visible to the user Ensure that the holder does not interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle for example airbags For mounting instructions see the documentation that came with the mobile holder Antenna coupler and external antenna An antenna coupler is required to connect an external antenna The external coupler improves the cellular signal reception of the mobile device in a car For compatible antenna couplers and external antennas contact your dealer Note In order to comply with RF exposure guidelines install the external antenna so that a minimum distance of 20 cm 8 inches can be maintained between the external antenna and all persons
5. 2 supplied with the car kit may impact the audio quality 28 Installation Power cable PCU 4 The power cable has the following wires and fuses 5 12 car battery red 1 Ground car battery black 2 Car radio mute yellow 3 Car ignition sense blue 4 2 A fuse 5 1 A fuse 6 To connect the power cable do as follows 1 2 Connect the black wire to the vehicle ground Plug the yellow wire into the mute connector of the car radio When a call is answered the car kit switches the yellow wire to ground muting the car radio When the call is ended the yellow wire is separated from ground and the car radio is unmuted If the car radio does not have a mute connector this wire can be left unconnected In this case the car radio is not muted automatically when you answer a call Alternatively an additional relay can be used to mute the car radio and to connect the car kit directly to the car speakers The mute signal is used to switch the relay Connect the blue wire to the ignition sense line of the car using the supplied 1 A fuse Some vehicles do not support the ignition sense connection In this case the blue wire can be left unconnected but the car kit does not switch off automatically when the car ignition is turned off 29 Installation When the ignition sense wire is not connected the car kit automatically switches off after two minutes if it is not connected to the mobile device to
6. Nokia Bluetooth Display Car Kit CK 15W User and Installation Guide 9200326 Issue 1 EN DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this HF 15 product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The product is in conformity with the limits defined in Directive 2004 104 EC amending Directive 72 245 EEC Annex I paragraph 6 5 6 6 6 8 and 6 9 A copy of the Declaration of Conformity can be found at http www nokia com phones declaration_of_conformity C 117 7 2007 Nokia All rights reserved Reproduction transfer distribution or storage of part or all of the contents of this document in any form without the prior written permission of Nokia is prohibited Nokia Nokia Connecting People and Navi are trademarks or registered trademarks of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners Bluetooth is a registered trademark of Bluetooth SIG Inc Nokia operates a policy of ongoing development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice Under no circumstances shall Nokia be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The contents of this document are provided as is Except as required by applicable la
7. al list not from Contacts Copy contacts from mobile device to car kit You can copy the contacts that you have saved in the internal memory of your compatible mobile device to the car kit To copy the contacts press the Navi wheel in the standby mode and select Contacts gt Download contacts gt Yes If you make or receive a call while the contacts are copied the copying may be stopped In this case start the copying again While the contacts are being copied you cannot use the contacts saved in Contacts If you connect another device to the car kit the contacts copied from the previous device are not shown To use the car kit to access the contacts saved in the new device copy the contacts to the car kit The contacts of the previous device are removed from the car kit W Call register The car kit registers the phone numbers of recent missed received and dialed calls The car kit registers missed and received calls only if the cellular network supports these functions and the device that you have connected to the car kit is switched on and within the network service area To view the recent calls press the Navi wheel in the standby mode and select Call registerand a call type To view the phone numbers press the Navi wheel To make a call to a phone number press 8 E Bluetooth settings To manage Bluetooth connections press the Navi wheel in the standby mode and select B uetooth Menu functions To view th
8. attach the display unit to the dashboard Loudspeaker SP 3 For good acoustic quality mount the loudspeaker so that it points toward the user Mount the loudspeaker more than 50 cm 19 5 inches from the driver s or passenger s head Mount the loudspeaker at least 1 meter 3 feet away from the microphone to avoid audio feedback Connect the loudspeaker to the mono output of the car kit The car kit can also be connected to a compatible car radio system consult your service technician Microphone MP 2 Select the mounting location of the microphone carefully to increase the quality of voice transmission Mount the microphone about 50 cm 19 5 inches from the driver s head and position it so that it points toward the driver s mouth Experience has shown that the best mounting locations are near the rear view mirror or the sun visor Mount the microphone at least 1 meter 3 feet away from the car kit loudspeaker to avoid audio feedback Mount the microphone so that it is not exposed to air streams from the vents Do not place the microphone cable in the heating ventilation or air conditioning system Use the supplied double sided adhesive tape to fix the microphone to reduce the amount of background noise of the car that can interfere with your calls Insert the microphone plug into the microphone connector on the hands free unit and turn the plug clockwise to lock it firmly Use of any other microphone than the microphone MP
9. ch for a contact p 18 To open the list of last dialed numbers press To call the last dialed number press g twice To activate the voice dialing feature of your mobile device press m when you are not in a call if your device supports the use of this feature with the car kit Proceed as instructed in the user guide of your device For voice dialing you must save voice tags for the desired contacts in your device E Speed dialing You can assign a contact to one of the speed dialing numbers 1 to 9 See Speed dials p 18 To use speed dialing turn the Navi wheel to left in the standby mode and scroll to the desired speed dialing number The contact assigned to 15 Call functions the speed dialing number is shown at the lower part of the display To confirm the number press or scroll to and press the Navi wheel Press g to make the call E Answer a call To answer a call press g or the Navi wheel The caller s name appears on the display if you have downloaded your contacts from your mobile device to the car kit If you do not answer a call you can view the caller s name or phone number by pressing Navi wheel after the call if this is allowed by the caller To reject an incoming call press If you have set the Automatic answer function to On the car kit automatically answers the call See Other settings p 20 To put a call on hold press the Navi wheel when Call options is displayed a
10. de with a finger Ensure that the surface where you attach the pad is dry and free from dirt and dust To attach the pad with the hooks peel off the protective sheet from the adhesive side and attach the pad to the underside of the hands free unit Press the hands free unit firmly onto the loop pad and check that the hands free unit stays securely in place Input device CU 8 The input device should be located so that it is within easy reach of the user When installing the input device ensure that it does not interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle for example airbags Ensure that the input device cable reaches to the hands free unit for connection The best location to mount the input device is horizontally on the console between the driver s and front passenger s seat so that the input device keys are toward the front of the vehicle To mount the input device use the hook and loop tape pads supplied with the car kit Detach the two pads from each other 1 Attach the pad with the loops first peel off the protective sheet from the adhesive side 2 and attach the pad to the desired location in the car When you peel off the protective sheet do not touch the adhesive side with a 26 Installation finger Ensure that the surface where you attach the pad is dry and free from dirt and dust Attach the pad with the hooks peel off the pr
11. e device that is currently connected to the car kit select Active device To close the connection press the Navi wheel To view the devices that are currently paired with the car kit select Paired devices To connect the car kit with a paired device select the device and Connect To remove the pairing select the device and Delete pairing To pair the car kit with a new device select Pair with phone and start the pairing from your device A Bluetooth passcode is shown on the car kit display Enter the same passcode on your device See also Pair and connect the car kit p 12 E Display settings To adjust the display settings press the Navi wheel in the standby mode and select Display settings To change the color of the display such as the background and the signal strength bar select Co our themes and the desired color theme To adjust the brightness of the display select Brightness and the desired brightness level To set the time after which the display backlight turns off in the standby mode select Auto dimming and the desired time If you select Off the backlight remains always on when the car kit is switched on E Other settings To adjust other settings of the car kit press the Navi wheel in the standby mode and select Settings To set automatic answer on or off select Automatic answerand the desired option If you select On the car kit automatically answers an incoming call For the time after which the call i
12. eel and select Contacts gt Search Select the first letter of the name For more available characters select the right arrow You can repeat this four times To delete the most recent letter press A To view the names that start with the entered letters press g or select J You can switch back to the character list by pressing N Scroll to the desired name Press g to call the default phone number of the selected name or press the Navi wheel scroll to the desired phone number and press Speed dials Speed dialing is a quick way to call frequently used phone numbers You can assign a phone number to the speed dialing numbers 1 to 9 Speed dials must be set on before using speed dialing see Other settings p 20 To set up speed dialing press the Navi wheel in the standby mode and select Contacts gt Speed dials e To view the contacts assigned to speed dialing numbers select View and scroll through the list To call the selected contact press the Navi wheel e To assign a name or phone number to a speed dialing number select Assign To select the name from the contacts list select the first 18 Menu functions letter of the name The names starting with this letter are shown Select the desired name phone number and speed dialing number e To delete an assigned speed dial select De ete and the contact that you want to remove from the speed dial list The contact is removed only from the speed di
13. er e Your service technician or dealer may be able to provide you with information on alternatives for mounting the equipment suitably in your vehicle without requiring bore holes Do not smoke when working on the car Ensure that there is no source of fire or flame nearby e Take care not to cause damage to electrical cables fuel or brake lines or safety equipment during installation work e RFsignals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems electronic antiskid antilock braking systems electronic speed control systems and airbag systems Should you notice a fault or change in the operation of such a system contact your car dealer e Ensure that cables are placed so that they will not be subject to mechanical wear and tear for example not laid under car seats or over sharp edges E Install the car kit in a vehicle This section describes how to install the car kit parts in a vehicle The parts are explained in Parts p 9 When installing the parts of the car kit ensure that none of them interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle for example airbags Do not use screws to install the display unit if you mount it within the head impact area Use the supplied adhesive instead 24 Installation Example of appropriate installation with
14. f last dialed numbers in the standby mode Press twice to redial the last dialed number in the standby mode End key 4 Press to end or reject a call Press to delete a single character when you write text or numbers Press to return to the previous menu level or display view Press and hold to return to the standby mode from the menu functions Quick start Press and hold to switch the car kit on or off if the car kit is not connected to the ignition system Indicator light 5 Shows that the car kit is switched on Navi wheel 6 Turn left or right to adjust the volume during a call or to scroll through different lists Turn left in the standby mode to enter a phone number or to use speed dialing Turn right in the standby mode to search for a contact in Contacts Press to perform the function shown at the bottom of the display E First time setup 1 2 Switch on your mobile device and car kit see p 11 When prompted to select a language for the texts on the car kit display turn the Navi wheel to scroll to the desired language and press the Navi wheel Activate the Bluetooth feature on your mobile device and pair and connect the car kit with a compatible mobile device using Bluetooth wireless technology When you are prompted to copy the contacts from the connected mobile device to the car kit turn the Navi wheel to scroll to Yes and press the Navi wheel to start the copying If you select No yo
15. its representative of your vehicle or any equipment that has been added Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device Check regularly that all wireless device equipment in your vehicle is mounted and operating properly Do not store or carry flammable liquids gases or explosive materials in the same compartment as the device its parts or enhancements For vehicles equipped with an air bag remember that air bags inflate with great force Do not place objects including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area If in vehicle wireless equipment is improperly installed and the air bag inflates serious injury could result 33
16. kit display to pair and connect the car kit to your device In some devices you may need to make the connection separately after pairing See the user guide of your device for details You only need to pair the car kit with your device once If the pairing is successful the car kit appears in the menu of your mobile device where you can view the currently paired Bluetooth devices If the pairing fails try to pair again by carefully following the pairing instructions You can pair the car kit with up to eight devices but connect it to only one device at a time Connect the car kit manually When the car kit is switched on and you have not connected it to a mobile device you can make the connection as follows Press the Navi wheel in the standby mode and select B uetooth gt Paired devices Select the desired device and Connect Connect the car kit automatically You can set your device to allow an automatic connection with the car kit when the car kit is switched on To do this in Nokia devices change your paired device settings in the Bluetooth menu When you switch on the car kit the car kit tries to make a Bluetooth connection to the last used device If this fails the car kit tries to connect to one of the other Bluetooth devices that have been most recently paired with it Disconnect the car kit To disconnect the car kit from your device close the Bluetooth connection with the car kit in the Bluetooth menu of your
17. nd select Ho d to make the call on hold active select Unhold If you have activated the call waiting feature in your mobile device you can answer another call during a call by pressing g The first call is put on hold To switch between the calls press g To end the active call press N E Mute or unmute the microphone To mute or unmute the microphone during a call press ior press the Navi wheel when Call options is displayed and select the desired option WE Switch a call between car kit and connected device To switch a call from the car kit to your compatible mobile device press and hold pA Some devices may close the Bluetooth connection until the call ends To switch the call back to the car kit use the relevant function on your device 16 Call functions E Send DTMF tones You can send DTMF tone strings for example a password during a call Press the Navi wheel when Call options is displayed and select Send DTMF Select the first character of the string The character is shown at the lower part of the display Select other characters in the same way Menu functions 4 Menu functions E Contacts You can copy names and phone number contacts from your compatible mobile device to the car kit and use the copied contacts for calling The contacts are saved in the Contacts menu Search for a contact To search for a contact in the standby mode turn the Navi wheel to right or press the Navi wh
18. otective sheet from the adhesive side 2 and attach the pad to the underside of the input device 3 Press the input device 4 firmly onto the loop pad and check that the input device stays securely in place Display unit SU 29 The display unit should be located so that it is clearly visible for the user and it can be easily rotated to left right up or down When installing the display unit ensure that it does not interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle for example airbags Ensure that the display unit cable reaches to the hands free unit for connection Mount the display unit on the dashboard in the upright position Do not use screws to install the display unit if you mount it within the head impact area Use the supplied adhesive instead To mount the display unit use the adhesive at the bottom of the display stand or the supplied screws To use the adhesive peel off the protective sheet from the adhesive and attach the display unit firmly to the dashboard When you peel off the protective sheet do not touch the adhesive with a finger Ensure that the surface where you attach the display unit is dry and free from dirt and dust To use the supplied 27 Installation screws ensure that drilling bore holes into the dashboard does not damage any systems or parts of the vehicle for example airbags Drill the required bore holes and
19. r kit is in the standby mode and connected to a compatible mobile device using Bluetooth wireless technology and the mobile device is registered to a cellular network the following information is shown on the display e Name of the mobile device or the 1 name of the car kit 1 the mobile device name can be defined in the Bluetooth menu of the device 2 3 4 e Signal strength of the cellular network at the current location 2 if this information is provided by the 5 mobile device the higher the bar the stronger the signal e Name or logo of the network operator or service provider 3 if this information is provided by the mobile device e Battery status of the mobile device 4 if this information is provided by the device the higher the bar the more power left 10 Get started e Function that can be performed by pressing the Navi wheel 5 in the standby mode pressing the Navi wheel opens the list of menu functions To enter a phone number manually or use speed dialing turn the Navi wheel to left To search for a contact from Contacts in the car kit turn the Navi wheel to right E Navigate the menus Many of the car kit functions are grouped into menus To open the list of menu functions in the standby mode press the Navi wheel when Menu is displayed at the bottom of the display To scroll to an item such as a menu function or through a list turn the Navi wheel left or right To select
20. s answered see the user guide of your mobile device To change the car kit language select Language setting and the desired language To define when the car radio is muted select Phone sounds and the desired option If you select Ca s only the car radio is muted only when 20 Menu functions you receive a call If you select A ways on the car radio is muted when the mobile device produces any sound for example a text message tone To set the warning tones of the car kit on or off select Warning tones and the desired option To set speed dialing on or off select Speed dials and the desired option If you select On the phone numbers assigned to the speed dialling numbers 1 9 can be dialed as described in Speed dialing p 15 To view the software and hardware versions of the product select Product info To scroll through the information press the Navi wheel repeatedly To reset the car kit to the factory settings select Restore factory settings E Reset the car kit If the car kit stops functioning you must reset it When the car kit is switched on press and hold g for 10 seconds The car kit restarts This does not reset the car kit settings E Troubleshooting cannot connect the car kit to my mobile device e Ensure that the car kit is switched on and paired with your device e Check that the Bluetooth feature is activated on your device The car kit does not establish a connection to my paired de
21. s not require that the mobile device and the car kit be in line of sight but both devices should be within 10 meters 30 feet of each other Connections may be subject to interference from obstructions such as walls or other electronic devices Introduction The car kit is compliant with Bluetooth Specification 1 2 that supports the following profiles Handsfree Profile 1 5 to use the car kit hands free with your mobile device and Phone Book Access Profile PBAP 1 0 to copy contacts from your mobile device to the car kit Check with the manufacturers of other devices to determine their compatibility with this device There may be restrictions on using Bluetooth technology in some locations Check with your local authorities or service provider Get started 2 Get started E Parts The car kit contains the following parts e Hands free unit HF 15 1 e Microphone MP 2 2 e Loudspeaker SP 3 3 e Input device CU 8 4 e Display unit SU 29 including system cable CA 115 5 e Power cable PCU 4 6 Get started Input device The input device contains the following parts e Microphone mute key 1 e Voice dialing key D 2 e Callkey 3 e End key 4 e Indicator light 5 e Navi wheel 6 Display and standby mode You can rotate the display up to approximately 30 degrees up left or right and up to approximately 10 degrees down Do not try to force the display to rotate more When the ca
22. speaker volume MakevaiCall iscsi Speed dialing Answer a call Mute or unmute themicrophoN Eisis 16 Switch a call between car kit and connected device Send DTMF tones 4 Menu functions Contacts ssssssssssessrsesesseeess Search for a contact t Speed dials eesssescssssecseescsneeeeee Copy contacts from mobile device to car kit Call register Bluetooth settings Display settings Other settings Reset the car kit Troubleshooting 5 Installation 23 Safety information 23 Install the car kit in a vehicle 24 Hands free unit HF 15 Input device CU 8 Display unit SU 29 Loudspeaker SP 3 Microphone MP 2 Power cable PCU 4 Optional enhancements i Mobile Nolder sssecsssesssssessesneeees Antenna coupler and external Antenna 30 Check the operation Of The car Kitii 31 Care and maintenance sss 32 Additional safety INFOPMAtION ececeeeeseeeeeereseees 33 For your safety For your safety Read these simple guidelines Not following them may be dangerous or illegal Read the complete user guide for further information Your device and its enhancements may contain small parts Keep them out of reach of small children D DeD D D SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger ROAD SAFETY COMES FIRST Obey all local laws Always keep your hands
23. t the car kit p 12 When your mobile device is connected to the car kit you are prompted to copy the contacts from the device to the car kit turn the Navi wheel to scroll to Yes and press the Navi wheel to start the copying If you select No you cannot use your saved contacts to make calls with the car kit To copy the contacts later see Contacts p 18 Pair and connect the car kit Before using the car kit you must associate pair and connect it with a compatible mobile device that supports Bluetooth wireless technology When you use the mobile device with the car kit over a Bluetooth connection secure the device in the car using a compatible mobile holder However you can maintain the Bluetooth connection in the car even if you keep your device for example in a purse To charge the battery in your device while using the car kit use a mobile charger that is compatible with your device To pair and connect the car kit with a compatible device after the first time use do as follows 1 Switch on the device and the car kit see p 11 2 Press the Navi wheel in the standby mode and select Bluetooth gt Pair with phone 12 Get started 3 Activate the Bluetooth feature on your device See the user guide of your device for instructions 4 Set your device to search for Bluetooth devices and select the car kit from the list of found devices 5 On your device enter the Bluetooth passcode shown on the car
24. the display unit mounted using the supplied adhesive Hands free unit HF 15 The hands free unit has the following connectors The symbols are printed at the bottom of the unit 5 6 oda BKB O Cf IO Connector for the microphone MP 2 K Mono audio output for the loudspeaker SP 3 e B Connector for the input device CU 8 e D Connector for the display unit SU 29 e t3 Dc power connector for the power cable PCU 4 When you install the hands free unit ensure that the cables for the display unit microphone and loudspeaker reach the places where you intend to mount these parts 25 Installation Do not mount the hands free unit inside a metal housing or on a metal surface because this will impair the Bluetooth connection between the hands free unit and the Bluetooth device that is connected to the car kit For an optimal connection ensure that the distance between the hands free unit and a metal surface is over 4 mm 0 16 inch To mount the hands free unit use the hook and loop tape pads supplied with the car kit in the same way as with the input device see the figures in Input device CU 8 p 26 Detach the two pads from each other Attach the pad with the loops first peel off the protective sheet from the adhesive side and attach the pad to the desired location in the car When you peel off the protective sheet do not touch the adhesive si
25. the item press the Navi wheel To return to the previous menu level press To return to the standby mode press and hold until the standby mode screen is displayed E Switch the car kit on or off Switch on If the ignition sense wire is not connected press and hold A To connect the ignition sense wire contact your service technician If the ignition sense wire is connected turn on the car ignition When the car kit is switched on the display and the indicator light of the input device turn on Switch off If the ignition sense wire is not connected press and hold for 5 seconds The car kit switches off after 2 minutes When the car kit switches off the display turns off After you turn off the car ignition do not leave the mobile device connected to the car kit to prevent accidental draining of the car battery Get started If the ignition sense wire is connected turn off the car ignition If you turn off the ignition during a call the car kit switches off after you end the call E First time use When you switch on the car kit for the first time you are asked to select the desired language for the texts on the car kit display Turn the Navi wheel to scroll to the desired language and press the Navi wheel to select it After the language selection you are asked to pair and connect the car kit with a compatible mobile device using Bluetooth wireless technology See also steps 3 to 5 in Pair and connec
26. u cannot use your saved contacts to make calls with the car kit Introduction 1 Introduction With the Nokia Bluetooth Display Car Kit CK 15W you can conveniently make and answer calls hands free You can also copy contacts from your compatible mobile device to the car kit and access the contacts on the supplied display The car kit and its menu functions can be controlled with the supplied input device The car kit can be connected to a compatible mobile device using Bluetooth wireless technology Read this guide carefully before having the car kit professionally installed and using it Also read the user guide for your mobile device which provides important safety and maintenance information Check www nokia com support or your local Nokia website for the latest version of the user guide additional information downloads and services related to your Nokia product Keep all enhancements out of the reach of small children E About this document The setup and operation of the car kit are described in Get started p 9 and Menu functions p 18 The installation of the car kit is described in Installation p 23 The car kit should only be installed by a qualified service technician using the approved original Nokia parts supplied in the sales package of the car kit E Bluetooth wireless technology Bluetooth wireless technology allows you to connect compatible devices without cables A Bluetooth connection doe
27. uidelines which apply for the installation of the car kit in an automobile However due to the wide variety of car types and models available on the market this guide cannot consider the individual technical requirements relevant for any particular vehicle Contact the vehicle manufacturer for detailed information about the vehicle in question The car kit is suitable for use only in a vehicle with a 12 V negative grounding system Use on other supply voltages or alternative polarity will damage the equipment Remember that modern automotive systems include on board computers where key vehicle parameters are stored Improper disconnection of the car battery may cause loss of data necessitating extensive effort for re initialization of the system If you have any concerns contact your car dealer before any installation work is done Do not wire the car kit equipment to the high voltage lines of the ignition system When installing the parts of the car kit ensure that none of them interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle for example airbags Ensure that the car kit and any of its components are not 23 Installation installed where you might come in contact with it in the event of an accident or collision If the display of a mobile device is to be used ensure the device is mounted in a holder and that the device display is clearly visible to the us
28. vice when turn on the ignition or switch on the car kit e Check that the Bluetooth feature is activated on your device e Ensure that your device is set to connect to the car kit automatically when the car kit is switched on The car kit does not switch on when turn on the car ignition Ask the technician who installed the car kit to ensure that the ignition sense wire is properly connected 21 Menu functions The caller cannot hear my voice during a call e Check that the car kit microphone is not muted e Ensure that the mobile device is properly connected to the car kit The car radio is not muted when answer a call Ask the technician who installed the car kit to ensure that the mute line is properly connected For the latest product information check www nokia com or your local Nokia website or contact your local dealer 22 5 Installation Installation E Safety information Observe the following safety guidelines when installing the car kit Only a qualified service technician should install or service the car kit using the approved original Nokia parts supplied in the sales package Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the car kit End users should remember that the car kit comprises complex technical equipment that requires professional installation using special tools and expert know how Instructions given in this guide are general g
29. w no warranties of any kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular products may vary by region Please check with the Nokia dealer nearest to you Unauthorized changes or modifications to this device may void the user s authority to operate the equipment Export Controls This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited 9200326 Issue 1 EN Contents For your Safety sssssscsseesees 4 Quick start 5 The input device 5 First time setup ssecssssecscssteseesseeseeneees 6 1 Introduction esses 7 About this document 7 Bluetooth wireless technology Input device a Display and standby mode Navigate the menus Switch the car kit on or off Switch on 11 Switch off First time use Pair and connect the car kit Connect the car kit manually Connect the car kit automatically nc eescseeecccesteeeeseeeeeeees 13 Disconnect the car Kit 13 Clear the list of paired devices 14 3 Call FUNCTIONS ssscecerseees Adjust the loud
Download Pdf Manuals
Related Search