Ikelite 4066.1 battery charger
Contents
1. the charger socket on the bottom of the older battery packs Newer battery packs for these strobes do not need this adapter as the proper charger socket is located on top of the battery pack USING THE CHARGER PLUGS The Ikelite Smart Charger 4066 1 comes packaged with four interchangeable AC adapter plugs for the following electrical regions USA European United Kingdom and Australian Choose the appropriate AC adapter plug for your location and slide the chosen adapter into the back of the charger it should snap into position To change the plug press up on the adapter plug to unsnap it from the back of the charger Slide another AC adapter plug into position Note Charger cords 0171 61 0171 62 0 171 63 for the original Smart Charger 4063 1 are not compatible with the Smart Charger 4066 1 CHARGING THE BATTERY PACK Warning Do not attempt to charge a battery pack when it is wet Electrical shock injury or fire could occur Make sure all components are completely dry Always turn the unit off before recharging Charge the battery pack after purchase and recharge after each use Store the battery pack fully charged Remove it from storage every few months and fully recharge it Refer to the product recharge times listed on the opposite page and read Indicator Lights for more details on charging times Caution e Do not completely drain fully discharge the battery pack Fully discharging the batteries will shorte2. IKELITE SMART CHARGER 4066 1 The Ikelite Smart Charger 4066 1is a variable input voltage charger that automatically adjusts to the voltage of the power source 100V to 240V This feature allows it to easily adapt to currents that fluctuate in places with poorly regulated power The charger offers trickle style maintenance this allows it to continuously charge the battery pack of the Subsrobe or flashlight safely The charger also prolongs battery life eliminates any possibility of battery memory and accepts interchangeable plugs for worldwide use The Ikelite Smart Charger 4066 1is only compatible with the NiCad and NiMH battery packs offered by Ikelite for the following products e Substrobe DS125 DS160 DS161 recharge time 1 5 hours e Substrobe DS200 recharge time 2 5 hours e Substrobe 100A Ai recharge time 4 hours e Substrobe 150 225 e Substrobe 300 400 recharge time 5 hours May require Socket Adapter 4063 51 recharge time 5 hours May require Socket Adapter 4063 51 e Super C Lite HR recharge time 2 5 hours e RCD HR recharge time 4 hours e RCD Super 8R recharge time 5 hours e Modular Super Lite recharge time 5 hours Newer battery packs only e Modular Video Lite recharge time 5 hours Newer battery packs only Socket Adapter 4063 51 Substrobe models 150 225 300 and 400 with the older style battery pack require purchase of the Socket Adapter 4063 51 This allows the Smart Charger to connect to
3. lugged into the outlet via the charger for extended periods of time IKELITE LIMITED WARRANTY All Ikelite products are warranted against any manufacturing defects for a period of one year from the original date of purchase Defective products should be returned prepaid to Ikelite Ikelite will at its discretion repair or replace such products and will return to customer prepaid All other claims of any nature including but not limited to bulb failure are not covered Except as men tioned above no other warranty expressed or implied applies to this Ikelite product IKELITE UNDERWATER SYSTEMS 50 West 33rd Street Indianapolis IN 46208 USA 317 923 4523 ikeli Email ikelite ikelite com 4066 06 1209
4. n the battery pack s life e The battery pack is factory sealed Do not disassemble Disassembly will void your Ikelite product s limited warranty INDICATOR LIGHTS Indicator Light on Battery Pack The Substrobe 100A 200 RCD HR and Super 8R feature an indicator light on the battery pack which will light up to show that a charge is being accepted the light does not go out once the batteries are fully charged Note For all other Ikelite products either there is no indicator light on the battery pack or the indicator light on the battery pack will not light up when using the Smart Charger Indicator Light on Smart Charger The indicator light on the Smart Charger is located on the front of the charger near the bottom It illuminates once the charger is connected to both the electrical outlet and the battery pack It shows the battery pack s present state of charge There are three states of charge Rapidly blinking light Indicates that the battery pack was almost completely drained discharged and that the pack is being slow charged to restore the batteries Once the batteries reach an acceptable level the charger will automatically switch to the quick charge mode Continuous light Indicates that the battery pack is being quick charged Slowly blinking light Indicates that the battery pack is fully recharged and that the charger is now providing a trickle style maintenance charge This allows the pack to remain safely p
Download Pdf Manuals
Related Search