Bytecc BT-1330TS-SL mounting kit
Contents
1. Installation Instruction UNPACKING INSTRUCTIONS e Carefully open the carton remove contents and lay out on cardboard or other protective surface to avoid damage e Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged Do not use damaged or defective parts e Carefully read allinstructions before attempting installation IMPORTANT SAFETY INFORMATION Install and operate this device with care Please read this instruction before beginning the installation and carefully follow all instructions contained herein Use proper safety equipment during installation Please call a qualified installation contractor for help if you e If you don t understand these directions or have any doubts about the safety of the installation e If you are uncertain about the nature of your wall consult a qualified installation contractor Do not use this product for any purpose or in any configuration not explicitly specified in this instruction We hereby disclaims any and all liability for injury or damage arising from incorrect assembly incorrect mounting or incorrect use of this product Supplied Parts List 1 Wall Plate a 1 ArmAssembled b 1 Mornitor Bracket c 1 Screw Cover d 4 M4x12 Bolt with Washer e 4 M4x30 Bolt f 8 M4 Washer g 4 M4 Space h 4 Lag Bolt i 4 Concrete Anchor j 2 Safety Knob k This TV mount m2. ust be securely attached to the vertical wall If the mount is not properly installed it may fall resulting in possible injury WARNING and or damage m 3 8mm Drill Bit 8mm Masonry Bit m Phillips Screwdriver m Carpenter s Level Tools Required Note The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or to cinder block walls If the hardware you need for your installation is not included please consult your local hardware store for proper mounting hardware for the application step Mounting the Wall Plate to the Wall Brick Mount Wood Mount 50mm Y LLLLLL A EMT step 2 Insert Arm Assembled to Wall Plate d 1 Before do this step make sure the Wall Plate a had been fixed on the wall 2 Put the Screw Cover d on the Arm Assembled b 3 Inter the Arm Assembled as showed in the left picture step 3 Mounting the Monitor Brackettoa TV ma Let te his way up e For Flat Back Monitor For Curved Back Monitor Stepa Attaching Monitor to Wall Plate and Adding the Knobs Thanks for choosing our products enjoy the using
Download Pdf Manuals
Related Search