Chief SLB087
Contents
1. INSTALLATION INSTRUCTIONS SLB 087 and SLM 087 Interface Brackets SLB and SLM series Interface brackets are designed for use with Chief RPA RPM and Smart Lift series projector mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative by calling 1 800 582 6480 WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 3 Screw Philips Flat Head Machine M4 x 20mm 6 10 24 Thumb Nuts 3 1 2 x 194 x 1 2 Nylon Spacer 1 All Points Security Kit SLB 087 SLM 087 Only used when installing SLB Interface brackets Used when mounting surface of projector is recessed Installation WARNING OVERTIGHTENING OF SCREWS CAN DAMAGE PARTS AND LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUPIMENT DO NOT over tighten screws when installing interface brackets NOTE Step 1 is only required when installing an SLB Interface bracket If an SLM bracket is being installed proceed to step 2 i Screw six thumb screws onto six 10 24 x 5 8 Philips pan head screws DO NOT fully tighten thumb screws at this time Turn projector upside down on a flat surface Place2. three 1 2 spacers over three threaded inserts in bottom of projector Place Interface bracket onto bottom of projector aligning mounting mounting holes and spacers eeN Secure Interface bracket to projector using three M4 x 20mm Philips flat head screws and flat washers NOTE Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the All Points Security Kit CSAV Inc and its affiliated corporations and subsidiaries collectively CSAV intend to make this manual accurate and complete However CSAV makes no claim that the infor mation contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind CSAV makes no representation of warranty expressed or implied regarding the information contained herein CSAV assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document EXN e 2006 Chief Manufacturing 8401 Eagle Creek Parkway Savage MN 55378 8850 00076 iC CH I E F P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 7 19 06
Download Pdf Manuals
Related Search