Chief SLB240
Contents
1. INSTALLATION INSTRUCTIONS SSB 240 SSM 240 SLB 240 and SLM 240 Interface Brackets SSB 240 SSM 240 SLB 240 and SLM 240 Interface Brackets are designed for use with Chief Series Projector Mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 4 10 24 Thumb Nuts 1 All Points Security Kit Towards front of projector SLB 240 Note SSB style interface bracket connections are encircled 1 Screw Phillips Pan Head Machine M4 x 16mm 2 Screw Phillips Pan Head Machine M4 x 8mm 1 1 2 x 218 x 1 4 Round Spacer 3 Washer Flat M4 Towards front of x SLM 240 Note SSM style interface bracket connections are encircled Only used when installing SLB SSB interface brackets Used when mounting surface of projector is recessed NOTE Specific to SSB style and SSM style interface bracket installation all appropriate screws come pre installed as reflected in the encircled locations above DO NOT attempt to substitute and USE ONLY this pre installed hardware for SSB style and SSM style in2. omplete However Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document CHIEF Our Mounts Your Vision Chief Manufacturing a products division of Milestone AV Technologies 8401 Eagle Creek Parkway Savage MN 55378 P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 a Duchossois Group Company 8850 000151 Rev01 2009 Milestone AV Technologies 05 09
3. terface bracket installation Installation Instructions WARNING OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT over tighten screws when installing interface bracket NOTE Step 1 is only required when installing an SLB SSB interface bracket If an SLM SSM bracket is being installed proceed to step 2 Turn projector upside down on a flat surface oe 2 hy Screw thumb screws onto 10 24 x 5 8 Phillips pan head screws DO NOT fully tighten thumb screws at this time Place interface bracket onto of projector and align bracket with threaded inserts in projector Hold interface bracket and use 1 4 spacer to slide between projector and front mounting hole in bracket Attach interface bracket to projector using M4 x 16mm Phillips pan head screw with flat washer in front mounting hole and M4 x 8mm Phillips pan head screws with flat washers in rear mounting holes of bracket Tighten all fasteners at this time securing the bracket to the projector NOTE Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the All Points Security Kit Chief is a registered trademark of Milestone AV Technologies All rights reserved oo eg sy lt 0 CONSUME Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and c
Download Pdf Manuals
Related Search