Lindy 2 Way TosLink
Contents
1. IND Yo CONNECTION PERFECTION Manual English LINDY No 70406 70407 70408 amp 70409 www lindy com LINDY ELECTRONICS LIMITED amp LINDY ELEKTRONIK GMBH FIRST EDITION Jan 2009 User Manual 70408 Digital to Analogue Audio Convertor Introduction Thank you for purchasing the LINDY Digital to analogue audio convertor This convertor allows you to input digital audio through a coaxial or optical port and output analogue audio through left and right phono ports A switch on the side of the unit determines which digital input is active Specifications e Input ports 1 x TOSLink Optical Fibre amp 1 x Coaxial e Output ports 2 x Phono Left amp Right Integrated digital interpolator filter and Digital to Analogue Converter DAC o Supports uncompressed digital stereo audio input Power Supply 5VDC 0 5A e Dimensions WxDxH 46 x 46 x 23 5mm Weight 30g e Housing Plastic o Colour White Operation Side View 1 Optical Coaxial switch The switch determines which input is active 2 Power Plug 5VDC PSU included into the unit and connect to a wall outlet Front Panel Rear Panel 1 Optical Coaxial input Connect your Optical Coaxial audio equipment 2 L R output Connect to your analogue audio device input port User Manual 70409 Analogue to Digital Audio Convertor Introduction Thank you for purchasing the LINDY analogue to digital audio convertor This convertor allows you to2. S audio signal Power Supply 5VDC 0 5A Dimensions WxDxH 46 x 46 x 23 5mm Weight 22g Housing Plastic Colour White Operation Side View 1 Power Plug 5VDC PSU included into the unit and connect to a wall outlet Front Panel Rear Panel 1 Optical input Connect your optical audio equipment such as DVD player or amp 2 Optical output Connect to your digital audio devices input ports CE FCC Recycling Information CE Certification This equipment complies with the requirements relating to electromagnetic compatibility EN55022 EN55024 class B for IEC EN61000 4 2 3 the essential protection requirement of Council Directive 89 336 EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the
3. fications Input ports 2 x TOSLink Optical Fibre Output port 1 x TOSLink Optical Fibre Supports S PDIF standard of digital audio transmission Supports uncompressed 2 channel LPCM Linear Pulse Code Modulation digital audio signal output Supports compressed 2 channel and multi channel Dolby and DTS audio signal Power Supply 5VDC 0 5A Dimensions WxDxH 46 x 46 x 23 5mm Weight 22g Housing Plastic Colour White Operation Side View 1 Selection Use this mini switch to select from 2 input ports A or B 2 Power Plug 5VDC PSU included into the unit and connect to a wall outlet Front Panel Rear Panel 1 Optical input Connect your optical audio equipment such as DVD player or amp 2 Optical output Connect to your digital audio device input port User Manual 70407 2 Port Optical Audio Splitter Introduction Thank you for purchasing the LINDY 2 port audio splitter This audio splitter allows you to have one optical fibre audio inputs and distribute it to two optical fibre audio outputs Each connected fibre cable can run up to 5m while still providing a reliable and lossless audio transmission Specifications Input ports 1 x TOSLink Optical Fibre Output ports 2 x TOSLink Optical Fibre Supports S PDIF standard of digital audio transmission Supports uncompressed 2 channel LPCM Linear Pulse Code Modulation digital audio signal output Supports compressed 2 channel and multi channel Dolby and DT
4. g agency Germany Die Europ ische Union hat mit der WEEE Direktive umfassende Regelungen f r die Verschrottung und das Recycling von Elektro und Elektronikprodukten geschaffen Diese wurden von der Bundesregierung im Elektro und Elektronikger tegesetz ElektroG in deutsches Recht umgesetzt Dieses Gesetz verbietet vom 24 M rz 2006 an das Entsorgen von entsprechenden auch alten Elektro und Elektronikger ten ber die Hausm lltonne Diese Ger te m ssen den lokalen Sammelsystemen bzw rtlichen Sammelstellen zugef hrt werden Dort werden sie kostenlos entgegen genommen Die Kosten f r den weiteren Recyclingprozess bernimmt die Gesamtheit der Ger tehersteller France En 2006 l union Europ enne a introduit la nouvelle r glementation DEEE pour le recyclage de tout quipement lectrique et lectronique Chaque Etat membre de Union Europ enne a mis en application la nouvelle r glementation DEEE de mani res l g rement diff rentes Veuillez suivre le d cret d application correspondant l limination des d chets lectriques ou lectroniques de voire pays Italy Nel 2006 l unione europea ha introdotto regolamentazioni WEEE per la raccolta e il riciclo di apparecchi elettrici ed elettronici Non pi consentito semplicemente gettare queste apparecchiature devono essere riciclate Ogni stato membro dell EU ha tramutato le direttive WEEE in leggi statali in varie misure Fare riferimento alle leggi del propr
5. input analogue audio through left and right phono ports and output digital audio through Coaxial optical ports A switch on the side of the unit determines which digital input is active The output digital audio signal is a 2 channel uncompressed LPCM Linear Pulse Code Modulation with a sampling rate at 48 KHz Both Optical Fibre and Coaxial cables can be connected at the same time and can run up to 5 meters while still provide reliable and lossless audio signal transmission Specifications o Input ports 2 x Phono Left amp Right o Output ports 1 x TOSLink Optical Fibre amp 1 x Coaxial o Supports uncompressed 2 channel LPCM Linear Pulse Code Modulation digital audio signal output Supports output sampling rate at 48 KHz Power Supply 5VDC 0 5A Dimensions WxDxH 46 x 46 x 23 5mm Weight 30g Housing Plastic Colour White Operation Side View 1 Power Plug 5VDC PSU included into the unit and connect to a wall outlet Front Panel Rear Panel 1 Phono input Connect your phono audio equipment 2 Coaxial optical output Connect to your digital audio device input port User Manual 70406 2 Port Optical Audio Switch Introduction Thank you for purchasing the LINDY 2 port audio switch This audio switch allows you to have two digital optical fibre inputs and one digital optical fibre output Each connected fibre cable can run up to 5m while still providing a reliable and lossless audio transmission Speci
6. io Stato quando si dispone di un apparecchio elettrico o elettronico Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato 1 Edition January 2009 C FC www lindy com
7. user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced technician for help You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation WEEE Waste of Electrical and Electronic Equipment X Recycling of Electronic Products United Kingdom In 2006 the European Union introduced regulations WEEE for the collection and recycling of all waste electrical and electronic equipment It is no longer allowable to simply throw away electrical and electronic equipment Instead these products must enter the recycling process Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways Please follow your national law when you want to dispose of any electrical or electronic products More details can be obtained from your national WEEE recyclin
Download Pdf Manuals
Related Search