Smeg DF410SF7 dishwasher
Contents
1. 15 User instructions m 4 Operating instructions Once the dishwasher has been correctly installed prepare for use as follows Adjust the water softening system Add the regenerating salt Add the rinse aid and detergent 4 1 Using the water softening system The amount of scale contained in W water water hardness index can cause whitish staining on the dry dishes which tend to become dull over time The dishwasher is equipped with an automatic softening system which uses a special regenerating salt to reduce the hardness of the water The dishwasher is factory set for water hardness level 3 average hardness 41 60 dF 24 31 dH When using water of medium hardness the regenerating salt container should be refilled after approximately 20 washing cycles The salt container can hold approximately 1 5 Kg of salt in grains The container is situated at the bottom of the dishwasher After removing the lower basket unscrew the salt container cap by turning it anticlockwise and pour in the salt using the funnel supplied with the dishwasher Before replacing the cap remove any salt residues from around the opening is also necessary to add one litre of water to the container Each time the salt container is refilled make sure that the cap is a When using the dishwasher for the first time in addition to the salt it 16 securely closed The mixture of water and detergent must never penetrate2. or excessively bend the nose important to prevent the hose from coming loose and Fortis purpose the plac suppor is auipped win hole or ing to the wall or water tap The tree end should be positioned at height of between 30 and 100 and should never be submerged in water If a horizontal drain extension hose is used for a maximum of 3 the drain hose can be placed at a maximum height of 85 em from the ground A Installation instructions 2 2 Electrical connection and precautions CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SAME TYPE AND MEET THE REGULATIONS IN FORCE THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD IN THE EVENT OF DAMAGE TO THE SUPPLY CORD HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE AFTER CHANGING THE SUPPLY CORD MAKE SURE THAT THE BRACKET WHICH SECURES THE CORD IS FIXED SECURELY IN PLACE DO NOT USE ADAPTORS OR SHUNT CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD IT 15 NECESSARY TO INSTALL IN THE FIXED WIRING AN ALLPOLE DISCONNECTION HAVING GAP BETWEEN CONTACTS OF AT LEAST
3. INSTRUCTION MANUAL CEND GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents EN Safety and operating instructions 1 2 Installation and hook up 3 Description of the controls 4 Operating instructions 16 5 Cleaning and maintenance 6 Troubleshooting 30 Thank you for choosing one of our products You are advised to read this manual carefully it contains all the information you need about the right conditions for the proper safe use of your dishwasher The individual sections are laid out to provide you with a step by step guide to all your appliance s functions the texts are easy to understand are complete with detailed illustrations Recommendations are given for the correct use of the baskets spray arms containers fiers washing programs and for operating the controls Following the cleaning instructions provided here will keep your dishwashers performance at peak levels in the long term This user friendly manual will provide answers to all your questions about use of the dishwasher INSTALLATION INSTRUCTIONS these are intended for the qualified technician who must carry out the installation hook up and testing of the appliance USER INSTRUCTIONS these consist of recommendations for using the appliance a description of its controls and of the correct cleaning and maintenance procedures CEN Safety instructions 1 Safety and operating instructio
4. of a tum and remove it Add the rinse aid until the container is full approximately 140 The optical level indicator on the side of the cap should be completely obscured the rinse aid when the optical level indicator becomes clear again or when the rinse aid warning light iminales Replace the cover and tum it in a clockwise direction Use cloth to remove any spillage of rinse aid which might lead to the formation of excess foam ADJUSTING THE RINSE AID DISPENSER SETTING The dishwasher is factory set for medium water hardness However it possible to change the setting by turning the dispenser s selector to the desired position the amount of rinse aid dispensed is proportional to the selector position To adjust the rinse aid setting rotate the dispenser cap through a Quarter tum in an anticlockwise direction and remove it Then use a screwdriver to rotate the rinse aid selector to the desired position Replace the cap turning it clockwise The amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains It on the other hand the dishes are sticky or have white streaks it is necessary to reduce the rinse aid setting 19 ED User instructions 20 ADDING THE DETERGENT To open the detergent dispenser cap lightly press the button P Add the detergent and close the cap carefully During the washing cycle the dispenser will be opened a
5. 3 5 AFTER INSTALLATION THE DISCONNECTION DEVICE HAS TO BE EASY TO REACH THE CONNECTION TO THE MAINS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN IN ACCORDANCE TO THE SCHEME SHOWN FD BELOW AND THE REGULATIONS IN FORCE __ 20 mm In the event of damage to the supply cord have it replaced by the manufacturer or an Authorized Technical Service Centre in order to avoid any risk User instructions FOR GREAT BRITAIN ONLY w aesumcsuntas namen Fuse replacement t the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug to 9 change fuse in this type of plug use approved fuse to BS 1362 po proceed as follows 1 Remove the fuse cover A and fuse B 2 Fit replacement 13A fuse into fuse 3 Refit both into plug cover is lost the plug must not be used until a correct replacement is fitted Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug Replacement fuse covers are available from your local electrical store 1 The fuse cover must be refitted when changing a fuse and if the fuse User instructions CEN 3 Description of the controls 3 1 Front panel All the dishwasher controls are grouped on the front panel 1 ON OFF BUTTON 2 SELECTION PROGRAM BUTTONS P1 P5 3 OPTION BUTTON 4 DELAY PROGRAM BUTTON 5 STARTISTOP BUTTON 6 POWER ON LIGH
6. CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN THIS DISHWASHER MUST BE USED BY ADULTS USE BY PERSONS WITH REDUCED MENTAL ANDIOR PHYSICAL CAPABILITIES IS ONLY PERMITTED UNDER THE SUPERVISION OF A PERSON RESPONSIBLE FOR THEIR SAFETY KEEP CHILDREN AWAY FROM DETERGENTS AND PACKAGING MATERIALS PLASTIC BAGS POLYSTYRENE AND NEVER ALLOW THEM TO APPROACH OR PLAY WITH THE DISHWASHER SINCE IT MIGHT CONTAIN DETERGENT RESIDUES CAPABLE OF CAUSING PERMANENT DAMAGE TO THE EYES MOUTH AND THROAT AND EVEN LEADING TO SUFFOCATION DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINE WHICH MAY CAUSE AN EXPLOSION DO NOT LOAD DISHES THAT ARE SOILED WITH ASH WAX OR PAINTS Safety instructions LEANING OR SITTING ON THE DISHWASHER DOOR WHEN OPEN MAY CAUSE THE APPLIANCE TO OVERTURN PUTING PEOPLE AT RISK NEVER LEAVE THE DISHWASHER DOOR OPEN PEOPLE MIGHT TRIP OVERIT DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGRAM AND BEFORE THE DRYING CYCLE KNIVES OR OTHER SHARP ENDED COOKING UTENSILS MUST BE PLACED IN THE CUTLERY BASKET BLADE DOWN OR LAID HORIZONTAL IN THE TOP BASKET TAKE CARE NOT TO CUT YOURSELF AND ENSURE THAT THEY DO NOT PROJECT FROM THE BASKET AQUASTOP MODELS A THE AQUASTOP DEVICE PREVENTS FLOODING IN THE EVENT OF A WATER LEAK WHEN THE AQUASTOP DEV
7. bach the execution of the program alarm ET is visualized at the end of the cycle that comes however brought to the end since the operation of the dishwasher is harmed To reset an alarm is necessary Open and close the door or tum off and on the machine At this point is possible to program the dishwasher again area at 30 User instructions TECHNICAL DATA Width Depth measured flush with the outer edge of the control panel Height Capacity Water supply pressure Electrical characteristics 447 449 mm 600 mm from 850 mm to 870 mm 10 Standard place settings min 0 05 0 9 MPa min 0 5 max 9 bar See rating plate 31
8. by the arrows Remove the central iter by lifting it 27 User instructions 28 GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE Thefiters should be cleaned under running water using a stif brush When removing the filer take care that there are no food residues on it If any residues fall into the washing pit they might block hydraulic components or foul the spray arm nozzles Itis essential to thoroughly clean the filters according to the above instructions the dishwasher cannot function if the fiters are clogged Carefully replace the fiers in their seats to avoid damaging the wash pump PROLONGED DISUSE Run the soak program twice in succession Unplug the power cord from the socket Leave the door slightly open in order to prevent the formation of unpleasant odours inside the washing tank Fil the rinse aid dispenser Shut off the water supply tap BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Check that there are no deposits of sludge or rust inside the water pipe if there are allow the water to run from the water supply tap for a few minutes Plug the power cord back into the socket Reconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMS In some cases it is possible to remedy minor problems by referring to the following instructions the program fails to start check tha the dishwasher
9. can be operated at the time of day of your choice The first time the PROGRAM DELAY button 4 is pressed the display will show 12 hours the maximum delay time before the program will start Each subsequent time the button is pressed the delay time will be reduced until the desired delay time is reached Particularly on the display it will have the following 12 indications Chosen the delay proceed with the program start press the button STARTISTOP 5 for same seconds unil the clock symbol start to flash The machine will perform a dish pre washing and when finish the delay program will enter in function as it was first set In case you want to put to zero the delay program within the running program it is necessary press the START STOP 5 button for some seconds until the lock symbol remain lid up on the display to press the DELAY PROGRAM 4 more times unti the reset of the delay program clock symbol shut off topress the START STOP 5 button to make start the program It is not possible to select the delay program when the program have already began 8 1 OPTION BUTTON on some models only available in all programs except the soak program Pressing this button 3 activates the 3 1 option the relative light comes on to confirm the selection This option is specifically for the use of tablet or powder detergents which already contain salt and rinse aid If you decide to us
10. dishes The ULTRA CLEAN and ULTRA CLEAN programs terminate with an extra anti bacteria rinse that ensures further reduction inthe bacteria level User instructions 3 3 Washing programs The dishwasher is equipped with a control panel and an INFORMATION DISPLAY 9 from which it is possible to carry out all the power switch on switch off and programming operations Before starting a washing program make sure that 4 The watar supp tap is open The correct amount of detergent has been added lo tho dispenser 2 baskets have boon correctly loaded 1 The spray arms are abis fo rotate freely and without cbstueti n The dishwasher door is securely closed LIGHTING Pressing the ON OFF button 1 will start the dishwasher and wil it up the dishwasher pilot light 6 After approximately 3 second from this operation the DISPLAY 8 will be turned on with a visualization that will depend upon the state of the dishwasher PROGRAMMING In this dishwasher model all the programming operations are possible only with closed door With open door on the DISPLAY 8 will appear the symbols and the PILOT LIGHT PROGRAMS 7 remains out User instructions E bill SELECTION PROGRAM eh EP FE program selection is possible 3 through the relative buttons 2 By pressing the relative button of desired program see table it wil id up the relative pilot light t
11. loaded upside down When loading soup plates and dessert bowls be sure to leave a gap between them Loading examples 23 User instructions 58 24 CUTLERY BASKET The cutlery should be arranged in an orderly manner inside the basket with the handles pointing downwards Take care during loading to avoid injury from the knife blades The basket is suitable for all types of cutlery except those long enough to interfere with the upper spray arm Ladies wooden spoons and cooking knives can be placed in the upper basket making sure that the knife blades do not protrude from the basket The cullery basket features an exclusive system of independent sliding tip up supports offering a choice of possible combinations to allow optimum use of the space available Horizontal Horizontal insert Movement required to extract the inserts UPPER BASKET It is recommended to load the upper basket with small or medium sized items such as glasses small plates tea or coffee cups shallow bowls and light objects made from heat resistant plastic If the upper basket is used in the lowermost positon it can also be loaded with serving dishes provided they are only slightly soiled The basket is equipped with two cutlery supports which can be raised or lowered as required See illustrations below User instructions LOADING THE UPPER BASKET Load plates facing forward cups bowls etc must always be facing downwa
12. such marks check that the amount of detergent being used is correct Certain detergents can be more corrosive than others check that the cap of the salt container is securely closed and that the water softening setting is correct after following the above troubleshooting instructions the problem persists call the nearest After Sales Centre WARNING any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user 29 User instructions 6 Troubleshooting The dishwasher is equipped with a self diagnostics system that is capable of detecting and signalling a number of possible faults TABLE OF FAULTS DETECTED BY THE SELF DIAGNOSTICS SYSTEM FAULT DESCRIPTION E1 The antislooding system where present has been tripped service E2 The water level limitation system has tripped The appliance cannot heat the water EA The temperature sensor is disconnected ES The appliance cannot take in the water E6 The appliance cannot drain the water from the tank The dishwasher cannot measure the precise water quantity that has been loaded EB Problem on the water distribution system to the baskes E9 Water intake system malfunction The Et E2 E4 alarms provoke the forcing to end cycle of the running program ES E6 alarms interrupts the running program once the cause is resolved it will bring
13. the salt container as this would compromise the operation Of the regeneration system In the event of this occuring the warranty wil be invalidated Only use regenerating salt specialy formulated for domestic dishwashers If using salt tablets do not fill the container completely User instructions Do not use table salt as it contains insoluble substances which over time may damage the water softening system When necessary the regenerating salt container before starting the washing program In this way the excess saline solution will be immediately removed by the water the prolonged presence of salt water inside the tank may lead fo corrosion Be careful not to confuse the salt and detergent packages adding detergent to the salt container will damage the water softening system ADDITIONAL FUNCTIONS Customizing the consumer parameters available in all programs except the soak program The electronic control system allows personalizing the machine use directly through a programming procedure not directly accessible that allows regulate water hardness level To access the programming environment the appliance must be turned on with the door closed Then proceed as follows press the PROGRAM DELAY 4 button until the H symbol appears the display followed by the number 3 gt H3 press the PROGRAM DELAY 4 button the number of times needed to select the right setting level for the h
14. ICE IS TRIPPED CALL IN A QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT IN MODELS EQUIPPED WITH THE AQUSTOP DEVICE THERE IS SOLENOID VALVE INSIDE THE WATER INTAKE HOSE DO NOT CUT THE HOSE AND DO NOT ALLOW THE SOLENOID VALVE TO DROP INTO WATER IN THE EVENT OF DAMAGE TO THE WATER INTAKE HOSE DISCONNECT THE APPLIANCE FROM THE ELECTRICAL POWER SUPPLY AND FROM THE WATER SUPPLY IMMEDIATELY AFTER INSTALLING THE DISHWASHER PERFORM A QUICK TEST OF THE APPLIANCE FOLLOWING THE INSTRUCTIONS BELOW IF THE DISHWASHER FAILS TO OPERATE CORRECTLY DISCONNECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE DO NOT ATTEMPT TO REPAIR THE APPLIANCE REGULATIONS IN FORCE GONCERNING SAFETY AND ELECTRICAL EQUIPMENT ANY TECHNICAL CHECKS SHOULD BE CONDUCTED EXCLUSIVELY BY A TRAINED AND AUTHORISED TECHNICIAN REPAIRS CARRIED OUT BY UNAUTHORISED PERSONS WILL INVALIDATE THE WARRANTY AS WELL AS POSING A POTENTIAL HAZARD TO THE USER THE DISHWASHER MEETS ALL THE REQUIREMENTS SET OUT BY THE The manufacturer declines all responsibility tor damage to persons or property resulting from failure to observe the above precautions from tampering with even a single component of the appliance from the use of non original spare parts Installation instructions 2 Installation and hook up Remove the polystyrene basket retainers Position the appliance in the desired place of installation The
15. INSTALLED ON A CARPETED OR COVERED FLOOR ENSURE THAT THE OPENINGS ON ITS UNDERSIDE NOT OBSTRUCTED ALWAYS SWITCH OFF THE DISHWASHER AFTER EACH USE TO AVOID WASTING ELECTRICITY Safety instructions OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE CUT OFF THE MAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FOR CHILDREN LOCKS DOORS ETC J THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT Wee BY ENSURING THIS PRODUCT is DISPOSED OF CORRECTLY YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR THE ENVIRONMENT AND HUMAN HEALTH WHICH COULD OTHERWISE BE CAUSED BY INAPPROPRIATE WASTE HANDLING OF THIS PRODUCT Tue spot ow tHe PRODUCT of ON THE DocuMeNTs Tie PRODUCT ROOTES HAP Mae Rer NE MAY ROP BE AS HOUSEHOLD WASTE INSTEAD SHALL REtveun or eral AND LECTRONE SE QUT IN ACCORDANCE Wm LOCAL ENVIROMENTAL REGULATIONS FOR WASTE DISPOSAL FOR RECYGLNG OF PRODUCT PLEASE CONTACT YOUR LOCAL CITY MESE You PURCHASED PRODUCT IN THE EVENT OF FAULT DISCONNECT THE DISHWASHER FROM THE ELECTRICAL POWER SUPPLY AND SHUT OFF THE WATER TAP DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING TRANSIT IF IN DOUBT CONSULT YOUR DEALER THE APPLIANCE MUST BE INSTALLED AND
16. T 7 PROGRAMS INDICATOR LIGHTS 8 INFORMATION DISPLAY 9 RECESSED DOOR HANDLE 3 2 Information display 3 The dishwasher is equipped with a practical 1 45 DISPLAY which provides information on he mimeo Xi 55 programmed dishwasher functions EN User instructions LITRES 1 2 1 END em mm em a ER ae Ez RESET SEBS amane Gers x wih normal dit 3 en 3 mE qm Eee en pr See o lee 7 0445 SIM m DELICATE rinse e SUE ES ee e FER i Auto soiled wash at 65 C M MORSU en Sredonresidue am mi 9 mie gman 2000 tem 20 170 mem Mete ES Only run the soak program with half oads The 21 OPTION 3 and DELAYED START 4 options cannot be used Relerence program as per EN 50242 standard When the AUTO 40 60 or AUTO 60 70 program is selected ihe dishwasher recognises the typeof dirt and automatically adjusts the washing Average power consumption with the softener set on Q a 10 ith the soak program See display Soe energy label The cycle duration and power consumption may vary according to the water and room temperatures and the type and amount of
17. ardness of the water HO H1 H2 H3 H5 Press the START STOP 5 button to confirm the setting and return to the program setting menu N B after 2 minutes the appliance exits the parameter setting menu automatically 7 User instructions E WATER HARDNESS TABLE HARDNESS German Degrees uH French Degrees WF 0 4 0 7 5 15 8 25 16 23 26 40 24 31 41 60 32 47 61 80 48 58 81 100 SETTING SetingN 1 NO SALT Seting N 1 Seting N 2 Seting N 3 Setting N 4 Seting N S Contact your local water board for information on the hardness of your water supply 4 2 Using the rinse aid and detergent dispensers The detergent and rinse dispensers are situated on the aid part of the door the detergent dispenser is on the left and the rinse aid dispenser is on the right fr With the exception of the SOAK program before every washing cycle it is necessary fo add the required amount of detergent to the detergent dispenser The rinse aid on the other hand should only be added as required User instructions Em ADDING THE RINSE AID The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining it is automatically added to the water during the final rinse cycle from the container Situated on the inner side of the door To add rinse aid Open the door Rotate the container cap anticlockwise by
18. back or sides of the dishwasher may be placed up against walls or other furniture units Ifthe dishwasher is installed near a heat source fit the special insulating panel to prevent overheating and malfunction of the appliance To ensure stability install integrated or built under dishwashers only under continuous worktops and screw them to the adjacent units To facilitate the installation procedure the intake and drain hoses can be positioned in any direction make sure that the hoses are not kinked crushed or pulled too tightly Make sure to tighten the locking ring nut once the pipes have been placed in the direction required A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass Level the appliance on the floor using its adjustable foet This operation is essential for ensuring correct operation of the dishwasher Buidigin a dishwasher undemeath a ceramic hob is absolutely forbidden dishwasher can be builtin underneath a conventional hob provided there is no break in the kitchen worktop and the dishwasher and hob are installed and secured correctly so that no hazards are generated When instaling the dishwasher in compartment next to one or more other appliances is essential to comply with all the recommendations provided by the appliance s manufacturer minimum distances installation procedures etc The dishwasher is equipped with only one adjustable foot at the rear which ca
19. e a product of this kind press the button to allow the dishwasher to vary the necessary parameters to ensure the best washing results by making full use of the quantities of detergent salt and rinse aid these special products contain At the end of the cycle the appliance automatically presets for the use of conventional products User instructions TO SAVE ON ENERGY AND PROTECT THE ENVIRONMENT Always tiy to run the dishwasher fully loaded Do not wash tho dishes in running water lt Uso the washing program that is most appropriate for each type of load Do not carry out any preliminary rinsing 17 avaiable connect the dishwasher fo a hot water supply up to 60 TO CUT DOWN ON DETERGENT CONSUMPTION AND PROTECT THE ENVIRONMENT The phosphates contained in dishwasher detergents are harmful to the environment To avoid using excessive amounts of detergent and to save on electricity observe the following separate the more delicate items from dishes that are more resistant to aggressive detergents and high temperatures do not pour the detergent directly on the dishes REMOVING THE DISHES At the end cf the washing program wait at least 20 minutes before removing the dishes to allow them to cool down To prevent any water droplets the upper basket from falling on the dishes in the lower basket it is advisable to unload the lower basket first and then the upper basket
20. hose remove the filter and clean it delicately under running water Reassemble filer A in its seat and carefully screw the water intake hose back into position CLEANING THE SPRAY ARMS The spray arms can be easily removed for periodic cleaning of the nozzles to prevent possible clagging Wash them under running water and carefully replace them in their seats checking that their rotary movement is in no way impeded To remove the upper spray unscrew locking ring R User instructions EN CLEANING THE SPRAY ARM TRAVELLING VERSION To remove the TRAVELLING spray arm take hold of it and raise it to release both the spray arm and the pipe from the tank then detach the spray arm from the pipe Wash both the pipe and the spray arm in running water re attach the spray arm to the pipe and return the assembly to the seat provided in the tank Once the assembly has been put back in place check that the spray arm turns freely turn through a couple of revolutions by hand and that the pipe is able to travel without impediments Otherwise check that it has been fitted correctly CLEANING THE FILTER UNIT The central filter H should be inspected regularly and cleaned it necessary To remove it take hold of the handle turn anti clockwise and if Press the central H from below to extract it from the micro fiter Separate the two parts of the plastic filer by pressing the body of the fiter in the zone shown
21. ieved at 65 C using traditional detergents For ihe safeguarding of the environment we recommend the use of hosphate and chlorine free detergents User instructions CEN aid check whether your dishwasher is fitted with the 3 1 option button on the Controls description page and then refer fo the section which explains how to use this function If the button is not provided we recommend the use of conventional products separate detergent salt and rinse aid because with conventional washing cycles 3 17 products might create problems such as a white deposit poor drying results and residues left on dishes SI Products If you wish to use detergents which already contain salt and rinse The introduction ot detergent into the rinse aid dispenser even in liquid form will damage the dishwasher 4 3 General warnings and recommendations following recommendations concerning dish types to be washed and their loading There are generally no constraints on the washing of domestic dishes but in certain cases it is necessary to take their characteristics into account a Before using the dishwasher for the first time it is advisable to read tho Before loading the dishes into the baskets it is necessary to remove coarse food remains e g bones fishrbones etc which may clog the filter or damage the wash pump soak any pots or pans with burnt on food remains on the bottom to facilitate removal then
22. is connected to ho electrical power supply here is no power failure Ime water tap is open he dishwasher door is properly closed f water remains inside the dishwasher check that the drain hose is not kinked the drain siphon is not obstructed the dishwasher fiters are not clogged User instructions If the dishes are not being cleaned properly check that the correct amount of detergent has been added there is regenerating inside the special container the dishes are being loaded correctly the selected program is suitable forthe dish types and their degree of soiling all the fiers are clean and positioned correctly the spray arm nozzles are not obstructed there is no object obstructing the rotation of the spray arms If the dishes fail to dry or remain dull check that there is rinse aid inside the special container the rinse aid dispenser setting is correct detergent used is of good quality and has not lost its effectiveness for example through incorrect storage with the box left open If the dishes show signs of streaking staining etc check that the rinse aid dispenser setting is not too high If there are visible traces of rust inside the tank tank is made of steel and therefore any rust marks are due to external elements fragments of rust from the water pipes pots cutlery Special products are commercially available to remove
23. load them into the LOWER BASKET There is no need to pre wash the dishes under running water before loading them into the baskets since this only wastes water Correct loading of the dishes helps ensure optimal washing results 2 User instructions ca 2 WARNING MAKE SURE that the items being washed are dishwasher se Make sure that the dishes are securely in place so that they cannot iip over or obstruct the rotation of the spray arms during the washing cycle Do not place very small objects in the baskets as these could fall and obstruct the spray arms or the wash pump Containers such as cups bowls glasses and pots should always be loaded with the opening facing downwards and with any cavities at an angle fo allow the water to drain out Do not stack dishes or place them in such a way that they cover other not place glasses too close together because they may knock against each other and break or there might be staining at the point where they touch Items which are not dishwasher safe Wooden dishes pots or pans these may be damaged by the high washing temperatures Handcrafted items these are rarely suitable for washing in a dishwasher The relatively high water temperatures and the detergents used may damage them Plastic dishes heat resistant plastic dishes must be washed in the upper basket Dishes and objects in copper tin zinc or brass these tend to stain Aluminium dishes item
24. n be adjusted by turning the screw on the lower front part of the appliance 2 1 Water supply connection Preventing the risk of clogging or damage if the water pipe is new or has not been used for a long time before connecting to the water supply check that the water is clear and free of impurities to prevent damage to the appliance The dishwasher must always be connected to the water system with new hoses old or used hoses must never be reused Installation instructions CONNECTING TO THE WATER SUPPLY Connect the intake hose to a cold water supply with 7 gas thread inserting the filter A supplied with the dishwasher Take care to screw the hose firmly into place with your hands and then complete by tightening about of a turn with pliers In dishwashers equipped with the ACQUASTOP device the filters is already fitted inside the threaded ring The dishwasher can also be connected to a hot water supply not exceeding 60 C Supplying the appliance with hot water cuts down the washing time by approximately 20 minutes but slightly reduces its effectiveness Make the connection to the domestic hot water supply using the same procedure described for connecting to the cold water supply DRAIN CONNECTION Insert the dishwasher s drain hose i into drain pipe having a diameter j Gf at least 4 em or alternatively place it inside the kitchen sink Using the plastic support provided taking not i
25. ns THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER BEFORE USING THE APPLIANCE CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN IN COMPLIANCE WITH THE REGULATIONS IN FORCE THIS APPLIANCE IS INTENDED FOR DOMESTIC USE AND COMPLIES WITH THE EEC DIRECTIVES 73 23 89 336 INCLUDING 9231 AND 93168 CURRENTLY IN FORCE INCLUDING THE PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE THE APPLIANCE IS DESIGNED FOR THE FOLLOWING PURPOSE WASHING AND DRYING OF DISHES ANY OTHER USE SHALL BE CONSIDERED IMPROPER THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR USES OTHER THAN THOSE DESCRIBED ABOVE THE NAME PLATE FEATURING THE TECHNICAL DATA SERIAL NUMBER AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE DOOR THE NAME PLATE ON THE INNER EDGE OF THE DOOR MUST NEVER BE REMOVED DO NOT LEAVE THE DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME SEPARATE THE VARIOUS MATERIALS WHICH MAKE UP THE PACKAGING AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE THE APPLIANCE MUST BE PROVIDED WITH AN EARTH CONNECTION IN ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE PERSONS OR PROPERTY RESULTING FROM THE FAILURE TO EARTH THE APPLIANCE OR FROM A DEFECTIVE EARTH CONNECTION THE APPLIANCE IS
26. o confirm that the operation did occurred on the DISPLAY 9 wil appear a program duration forecasting hmm START PROGRAM At this point in order to start the machine it is only enough to press the STARTISTOP 5 for some seconds until the writin Time to end start to flash and confirmation beep is heard From this moment the cycle dration on the DISPLAY 8 starts to decrease This phase that updates itself during the cycle is indicative since it is influenced by the washing conditions such as dishwasher type and quantity entry temperature etc For this reason it is normal to see the updating during a program increment and decrease of minutes specially in the passage from one phase to the other for example from washing to rinse END PROGRAM The end of the program is indicated by a short signal acoustic and from the End visual nolifcation on DISPLAY 8 By pressing one of the buttons the End visual signal will vanish from the display and the dishwasher is ready to continue a new cycle the same thing happens when closing or opening the door or by switching on off the machine INTERRUPTING A PROGRAM n order to interrupt a running program it is necessary to press the START STOP 5 for some seconds unti when the writting Time to end remains lt on the display confirmation beep At this point is possible to start the cycle again otherwise User instr
27. rds The left hand side of the basket can be loaded with two layers of cups and glasses On the right plates and saucers can be slotted verticalli into the forks Loading examples ADJUSTING THE UPPER BASKET The upper basket can be adjusted in two positions according to the user s needs and according to the height of the dishes in the lower basket Proceed as follows tum the retainer E on both runners right and left through 90 remove the basket it the basket and fit the smaller pairs of wheels in the runners return the retainers E to their original position User instructions m 26 5 Cleaning and maintenance Before carrying out any work always unplug the appliance from the electrical supply or switch off the all pole disconnection device 5 1 General warnings and recommendations Avoid the use of acidic or abrasive detergents Clean the outer surfaces and dooriining of the dishwasher regularly using a soft cloth moistened with water or with normal delerge suitable for painted surfaces Clean the door gaskets with a damp sponge Periodically once or twice a year it is advisable to clean the tank and gaskets using a soft cloth and water to remove any deposits CLEANING THE WATER INTAKE FILTER The water intake filter A located at the outlet of the water supply tap needs to be cleaned periodically After having closed the water supply tap unscrew the end of the water intake
28. s made trom anodised aluminium may lose their colour Silverware silver items may stain Glass and crystal in general glass and crystal objects can be washed in the dishwasher However certain types of glass and crystal may become dull and lose their clearness affer many washings Therefore for these items we recommend using the least aggressive program available Decorated items the decorated objects available on the market are generally able to withstand washing in the dishwasher although the colours may fade after a great many washes If in doubt as to the fastness of the colours it is advisable to wash just a dew items at a time for approximately one month User instructions 4 4 Using the baskets The dishwasher has a capacity of 10 place dishes ings including serving LOWER BASKET The lower basket receives the full force of the lower spray arm and should therefore be used for the toughest items with a heavier degree ot soiling All types and combinations of loads are permitted provided that the dishes pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom The bottom basket is fitted with supports which can be lowered to make better use of the space available With tilting supports LOADING THE LOWER BASKET Carefully load flat plates soup plates dessert and serving dishes Positioning them vertically Pots pans and their covers must be
29. uctions CEN CHANGE A PROGRAM change the running program itis necessary lt o interrupt the running program see INTERRUPTING A PROGRAM select the new program o press again the STARTISTOP button 5 to make start the new program STOPPING APROGRAM To stop a program in progress it must first be interrupted see INTERRUPTING A PROGRAM Now press buttons 1 2 simultaneously and The fit reo program wil come on The display will show PO and the dishwasher will immediately switch to the end of the cycle and drain the tank during this process the Time to end message will flash When the drain procedure ends the end of cycle message End appears on the display In case that the door is opened during the operation to the next door closing itis going to be necessary to start the program as shown in paragraph START PROGRAM The program will resume from the point in which it was interrupted In case that the tub temperature is higher than 50 C the program will start about 30 seconds later The washing cycle will not take place tho dishwasher door is left open not properly closed 13 User inetruetions 14 DELAYING THE PROGRAM on some models only available in all programs except the soak program The PROGRAM DELAY button 4 can be pressed to delay the start of the program by up to 12 hours This means that the dishwasher
30. utomatically When a program with hot prewash is selected see program table extra detergent must be placed in the cavity G H depending models Use only detergents specially formulated for dishwashers For optimal washing results its important to use a good quality detergent The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results Once opened the detergent packs should be kept for too dong otherwise the detergent loses its effectiveness 00 noi use detergents formulated for washing dishes hand because they produce a great deal of foam and may negatively affect the operation of the dishwasher Add ihe correct amount of detergent An insufficient amount of detergent will result in partial removal of dirt from the dishes whereas an excessive amount is wasteful and does not improve the wasting results market offers liquid and powder detergents with diferin chemical compositions which may contain phosphates or be phosphate free but contain natural enzymes Detergents containing phosphates are more effective against grease and starch at temperatures above 60 C Enzyme detergents on the other hand are also effective at lower temperatures from 40 to 55 C and are more easiy biodegradable With enzyme detergents it is possible to obtain at ow temperatures comparable results to those which can only ach
Download Pdf Manuals
Related Search