Home

De Dietrich DHD797X cooker hood

image

Contents

1. gill gi To stop the hood press the D button for 2 seconds The lighted speed buttons go out e CHANGING THE SPEED After starting the hood you can change the suction speed by pressing the appropriate button Eg The hood is on speed 2 Pressing A switches it to suction speed 4 The 4 button lights up 55 99642621 A ML qxp 14 06 2007 13 34 ot Di 3 USING YOUR APPLIANCE DELAYED STOP When you finish cooking you can select the 109 button to stop your hood This function allows you to keep the fan on for 10 minutes at the selected speed To cancel the delayed stop press the same button and the delayed stop is cancelled LIGHT Pressing the amp button briefly turns on your hood s halogen light To turn off the halogen light press the button Both the light and the button will go out e LOCKING THE CONTROL PANEL When cleaning your hood you can lock the control panel by pressing the button for 5 seconds The button stays lit To unlock the control panel do the same thing The 22 button goes out 56 wa 99642621 A ML qxp 14 06 2007 13 34 ap 3 USING YOUR APPLIANCE EI e RECIRCULATION MODE If your hood is in recirculation mode and you want to use carbon filters When using them you can configure the hood in recirculation mode Keep your finger pressed at the same time on Q and
2. The buttons light up Confirm the configuration by pressing D The indicators go out 57 99642621 A ML qxp 14 06 2007 13 34 o Di 3 USING YOUR APPLIANCE EXTRACTION MODE If your hood is connected to an external outlet you can configure it for extraction mode Press and simultaneously The buttons light up When 2 and are lit your hood is configured for EXTRACTION Press CD to confirm When 3 and Ai are lit press The 2 and ai buttons light up Confirm by pressing 58 4 99642621 A ML qxp 14 06 2007 13 34 o 3 USING YOUR APPLIANCE EN e SATURATED FILTER CARTRIDGE When the indicator flashes it means the filter cartridges must be cleaned see chapter Cleaning the filter cartridge Press to unlock the saturation function The indicator goes out e SATURATED CARBON FILTER When your hood is in recirculation mode and the indicator is lit it means you need to change the carbon filter we recommend that you replace the filters every 6 months To turn off the indicator press the button The indicator goes out e AUTO STOP FAN If you forget to turn off your hood it will stop after nine hours of use The hood switches to OFF mode e AUTO STOP LIGHTING If your forget to turn off the light it will go out after nine hours
3. It must be connected to the main power supply which should be a 220 240 V single phase current via a CEI 60083 standardised socket that should remain accessible after installation in keeping with installation guidelines We cannot be held responsible for any accident resulting from an inexistent defective or incorrect ground lead The fuse in your set up must be 10 or 16 amperes If the power cable is damaged call the after sales service department in order to avoid danger Warning If the electrical installation at your residence requires any changes in order to hook up your appliance call upon a professional electrician Warning If the hood displays any malfunctions unplug the appliance or remove the fuse corresponding to the electrical socket where your appliance is plugged in 50 99642621 A ML qxp 14 06 2007 13 34 masse E e ASSEMBLING THE HOOD PN Warning The hood must be installed in compliance with all applicable regulations concerning the ventilation of premises In France these regulations are described in DTU 61 1 from the CSTB In particular the evacuated air should never be conveyed to a duct used to evacuate smoke from appliances that use gas or other combustible fuels Unused ducts may only be used after approval from a competent specialist The minimum distance between the cooking surface and the lowest part of the hood must be 70 cm If the instructions for the hob installed under the
4. hood specify a distance of more than 70 cm this requirement must be respected Draw a horizontal line 70 cm minimum from the cook top A fig 1 Draw a vertical line B fig 1 on the wall that is centred over the cook top and that extends from the ceiling to the horizontal line drawn in the previous step A Place the C template fig 1 on the wall superimposing the line that represents the hood s axis over vertical line B fig 1 drawn in the previous step Attach the ventilation shaft bracket F fig 1 flush with the ceiling for support and position the notches over axis B Drill the six holes Insert the six wall plugs Screw in the two brackets E Using the rectangular cut outs attach the suction hood to the two brackets fig 2 The size of these cut outs allows you to adjust the position to the right or left ous Correct the height and the levelness by moving the adjustment screws G then firmly press the hood by tightening the screws H 51 99642621 A ML qxp 14 06 2007 13 34 oft EI 2 INSTALLING YOUR APPLIANCE e ASSEMBLING THE VENTILATION SHAFT e Outdoor evacuation Using the two screws fig 1 attach the metal ventilation shaft bracket against the wall flush with the ceiling for support Mount the back flow valve near the motor outlet fig 2 This back flow valve makes it possible to block the entry of air from the outside If a 1
5. making any changes to their features considered necessary or desirable in view of technical progress In order to easily locate the reference information for your appliance we recommend that you note these data on the After Sales Service Department and Customer Relations page This page also explains to you where to find this information on your appliance Warning In the case of a kitchen heated by a device connected to a ventilation shaft a stove for example the hood should be installed in the recycling configuration Do not use the hood without metal filtres Suitable ventilation should be provided in the room when the hood is used at the same time as appliances operated by gas or another combustible fuel You should install a CO carbon monoxide detector in your room to warn of any danger of toxic gas This warning does not apply to appliances which only recirculate air within the room 46 4 99642621 A ML qxp 14 06 2007 13 33 resect 1 NOTICES TO THE USER EN e ENVIRONMENTAL PROTECTION This appliance s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose Your appliance also contains a great amount of recyclable material It is marked with this label to indicate the used appliances that should not be mixed with other waste This way the appliance recycling organised by your ma
6. ventilation shaft C fig 3 on the metal smoke deflector Affig 3 using the two screws F fig 3 Adjust the length of the telescoping ventilation shaft by bringing down the lower part and fitting it into the top of the hood Smoke deflector Vents Telescoping ventilation shaft Flue Oe oO Motor bracket Q Ventilation shaft holding screw Qu For optimal use of your appliance we recommend that you connect the hood to a 150 mm diameter flue not delivered with the appliance Minimise the number of angles and bends and the lengths of the flue In the event that the hood will be operated using outdoor evacuation you should ensure a sufficient inflow of fresh air to avoid a pressure deficiency in the room 53 a 99642621 A ML qxp 14 06 2007 13 34 o EI 3 USING YOUR APPLIANCE e DESCRIPTION OF THE CONTROLS On Off Speed 1 Q Boost Speed 3 Lighting Speed 4 Q Q Speed 2 Q Delayed stop Q D Tip This Guide to Installation and Use is valid for several models Minor differences in details and fittings may emerge between your appliance and the descriptions provided 54 4 99642621 A ML qxp 14 06 2007 13 34 og 3 USING YOUR APPLIANCE EN e STARTING THE HOOD Pressing the button starts the hood at speed 1 Pressing the 2 button starts the hood at speed 2 III For speeds 2 4 and sos perform the same steps e STOPPING THE HOOD
7. 25mm flue is being installed use the adapter provided fig 3 If the diameter of your exterior flue is less than 125 mm you must connect your hood in the recycling configuration Slide the end of the flue over the motor outlet fig 4 Prepare your telescoping ventilation shaft taking care not to block the vents fig 4 Fit the ventilation shafts into one another as far as they will go Attach the upper portion of the ventilation shaft B fig 4 on the metal ventilation shaft bracket A fig 4 using the two screws G fig 4 Adjust the length of the telescoping ventilation shaft by bringing down the lower part and fitting it into the top of the hood Q Ventilation shaft bracket B Telescoping ventilation shaft Flue Adaptor Back flow valve Motor outlet O 00 o O Ventilation shaft holding screw 52 99642621 A ML qxp 14 06 2007 13 34 on 2 INSTALLING YOUR APPLIANCE EN e Recycling Remove the back flow valve fig 1 Using the two screws fig 2 attach the plastic smoke deflector against the wall flush with the ceiling Be careful to centre the deflector in relation to the vertical line drawn on the wall fig 2 Slide one end of the flue over the deflector and the other end over the motor outlet fig 3 Prepare your ventilation shaft taking care to face the vents upward so that they are visible B fig 3 Attach the upper portion of the
8. 99642621_A ML qxp 14 06 2007 13 31 zt FR GUIDE D UTILISATION DE BETRIEBSANLEITUNG EN GUIDE TO INSTALLATION ES MANUAL DE UTILIZACION IT MANUALE D USO NL GEBRUIKSAANWIJZING PT GUIA DE UTILIZACAO Hotte d cor Dekor Dunstabzugshaube Decorative Hood Campana extractora decorativa Cappa arredamento Designafzuigkap H Exaustor decorativo De Dietrich 99642621 A ML qxp 14 06 2007 13 33 ch Gy 02 E 23 El 44 E e 86 NIH 107 128 De Dietrich O Dear Customer You have just acquired a DE DIETRICH hood and we would like to thank you Our research teams have created this new generation of appliances for you Their quality design features and technological advances make them exceptional products and reveal our unique know how Your new DE DIETRICH hood will blend harmoniously into your kitchen and will perfectly combine extraction performance and ease of use We wanted to offer you a product of excellence In the DE DIETRICH product line you will also find a wide range of ovens microwaves hobs cookers dishwashers and fridges that you can coordinate with your new DE DIETRICH hood Of course in an ongoing effort to best satisfy your demands with regard to our products our after sales service department is at your disposal and ready to listen in order to respond to all of your questions and suggestions contact information at the end of this booklet Visit our website www dedietrich electromenager com whe
9. DIENST Eingriffe an Ihrem Ger t d rfen nur von Ihrem Handler oder von einem sonstigen Fachmann und Vertragsh ndler der Marke durchgef hrt werden Geben Sie bei der Meldung einer St rung die vollst ndige Typenbezeichnung Ihres Ger tes an Modell Typ Seriennummer Diese Angaben finden Sie auf einem an Ihrem Gerat angebrachten Schild EN 6 AFTER SALES SERVICE Any maintenance on your equipment should be undertaken by either your dealer or another qualified mechanic who is an authorized agent for the brand appliances When making an appointment state the full reference of your equipment model type and serial number This information appears on the manufacturer s nameplate attached to your equipment ES 6 SERVICIO TECNICO Las intervenciones que requiera la maquina deberan ser efectuadas por el revendedor O por cualquier profesional cualificado depositario de la marca Al llamar mencione la referencia completa de la maquina modelo tipo y numero de serie Estos datos figuran en la placa de identificaci n situada en la maquina 6 SERVIZIO POST VENDITA Qualquer interven o no seu aparelho deve ser realizada quer pelo seu revendedor quer por outro profissional qualificado autorizado pela marca Ao cham los indique a refer ncia completa do seu aparelho modelo tipo e n mero de s rie Estas informa es figuram na placa de identifica o fixada no aparelho 6 SERVICED
10. Do not use it for commercial or industrial purposes or for any other purpose than that for which it was designed Do not modify or attempt to modify any of the characteristics of this appliance This would be dangerous to your safety Repairs must only be performed by an approved specialist Always unplug the hood before cleaning it or performing other maintenance work Provide adequate ventilation for the room in the case of simultaneous use of the hood and other appliances powered by an energy source other than electricity This will prevent the hood from aspirating the combustion gases You should never flamb dishes under the hood or operate gas rings under the hood without placing cookware on them the flames sucked up into the hood can damage the appliance When frying food under the appliance you must carefully monitor the preparation at all times Oils and grease brought to very high temperatures can catch fire Respect the recommended frequency of cleanings and filter replacements The accumulation of grease deposits may cause a fire The hood should never be used over a combustible fuel burning stove wood coal etc Never use steam or high pressure devices to clean your appliance requirement imposed by electrical safety concerns With a view to constantly improving our products we reserve the right to modify their technical functional or aesthetic characteristics
11. IENST De eventuele ingrepen in de machine moeten worden uitgevoerd of door uw vakhandelaar of door een andere gekwalificeerd technicus van dit merk Tijdens het telefoneren dient u de complete referentie op te geven van uw machine model type serienummer Deze informatie staat op het typeplaatje op de machine 6 SERVI O POS VENDA Qualquer interven o no seu aparelho deve ser realizada quer pelo seu revendedor quer por outro profissional qualificado autorizado pela marca Ao cham los indique a refer ncia completa do seu aparelho modelo tipo e numero de s rie Estas informa es figuram na placa de identifica o fixada no aparelho 64 o
12. d the exhaust duct empty into the attic Install the hood at a safe distance of at least 70 cm from an electric gas or combined cooking hob e USING THE EVACUATION MODE If you possess an outlet to the exterior fig 1 Your hood can be connected to this outlet using a flue minimum diameter 125 mm enamelled or made of aluminium flexible or fireproof material If your flue is less than 125 mm in diameter you must use the recycling configuration e USING THE RECYCLING MODE If you do not possess an outlet to the exterior fig 2 All of our appliances can be used in recycling mode In this case you should add an active carbon filter which will keep in odours See Chapter 4 Changing the carbon filtre 49 99642621 A ML qxp 14 06 2007 13 34 echt EI 2 INSTALLING YOUR APPLIANCE e ELECTRICAL CONNECTION During installation and maintenance operations the appliance must be unplugged from the electrical grid fuses must be cut off or removed The electrical connections are made before the appliance is installed in its housing Ensure that the electrical installation has sufficient voltage the electrical wires are in good condition the diameter of the wires complies with the installation requirements PN Warning This appliance is delivered with a H 05 VVF power cord that has three 0 75 mm conductors neutral phase and ground
13. do not use abrasive creams or scrubbing sponges e CHANGING THE LIGHT BULB Warning Before carrying out any work the power supply to the hood must be turned off either by unplugging it or by using the circuit breaker switch Model with halogen bulb Remove the lighting port fig 1 Change the halogen bulb G4 20W 12V Replace the bulb by repeating these steps in reverse order 61 99642621 A ML qxp 14 06 2007 13 34 cp DI 4 CARING FOR AND CLEANING YOUR APPLIANCE Warning Before carrying out any work the power supply to the hood must be turned off either by unplugging it or by using the circuit breaker switch e MAINTAINING YOUR APPLIANCE PRODUCTS WHAT TO DO ACCESSORIES TO USE MAINTENANCE Top surface and accessories Filter cartridge Activated carbon filtre Never use metal scouring pads abrasive products or excessively stiff brushes This filter captures fatty fumes and dust This component plays an important role in ensuring the effectiveness of your hood In the event of tough stains use a non abrasive cream then rinse with clean water This filter traps odours and must be changed at least once a year depending on your level of use You should order these filters from your dealer quoting the reference shown on the identification plate located inside the hood and note the date the filter was changed To clean the body and the lighting port you should us
14. e filter cartridges 60 e Changing the carbon filter 60 e Cleaning the outer surfaces 61 Changing the light bulb 61 e Caring for your appliance 62 5 TROUBLESHOOTING 63 6 AFTER SALES SERVICE 64 45 99642621 A ML qxp 14 06 2007 13 33 ch Di 1 NOTICES TO THE USER Warning Keep this user guide with your appliance If the appliance is ever sold or transferred to another person ensure that the new owner receives the user guide Please become familiar with these recommendations before installing and using your oven They were written for your safety and the safety of others This appliance is not intended to be used by persons including children with reduced physical sensory or mental abilities or persons lacking experience or awareness unless using it with the help of a person responsible for their safety or under supervision and with prior instruction in its use SAFETY RECOMMENDATIONS This oven was designed for use by private persons in their homes This appliance is to be used by adults Make sure that children do not touch it and that they do not treat it as a toy Make sure that they do not touch the appliance s control panel When you receive the appliance unpack it or have it unpacked immediately Give it an overall inspection Make note of any concerns or reservations on the delivery slip and make sure to keep a copy of this form Your appliance is intended for standard household use
15. e only commercial household cleaning products diluted in water and then rinse using clean water drying with a soft cloth Use a commercial household cleaning product then rinse abundantly and dry You may place these parts in your dishwasher in the vertical position do not let them come into contact with dirty dishes or silverware To keep your appliance in good working order we recommend that you use Clearit household products Professional expertise for the general public Clearit offers you professional products and adapted solutions for the daily upkeep of your household and kitchen appliances You may find them in conventional retail outlets along with a complete line of by products and consumables 62 4 99642621 A ML qxp 14 06 2007 13 34 ep 5 TROUBLESHOOTING EN SYMPTOMS SOLUTIONS Ensure that The power is not cut off The hood is not working A speed has been selected Ensure that e The selected motor speed is sufficient for the quantity of smoke and vapours to be cleared The hood is not f e The kitchen is sufficiently ventilated to allow operating effectively for fresh air intake e The carbon filter is not worn hood operating in recycling mode Ensure that The power is not cut off The hood has stopped working e The single pole cut off device was not activated 63 99642621 A ML qxp 14 06 2007 13 34 cast DE 6 KUNDEN
16. nufacturer will be done under the best possible conditions in compliance with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment Warning Installation should only be performed by installers and qualified technicians Warning Before using the filter cartridge for the first time remove the protective film 47 99642621 A ML qxp 14 06 2007 13 33 o Di 1 NOTICES TO THE USER e DESCRIPTION OF YOUR APPLIANCE 144 mm 360 mm E E Ei E E o Ko Q vents Top surface O Ventilation shaft Control panel 48 99642621 A ML qxp 14 06 2007 13 33 o 2 INSTALLING YOUR APPLIANCE EI The appliance must be unplugged during installation or when any repairs or maintenance work is being performed Ensure that the network voltage corresponds to the voltage noted on the identification plate located inside the hood If the electrical installation at your residence requires any changes in order to hook up your appliance call upon a professional electrician If the hood is being used in evacuation mode do not connect the appliance to a combustion gas exhaust duct boiler ventilation shaft etc or to a CMV controlled mechanical ventilation system Under no circumstances shoul
17. of use 59 4 99642621 A ML qxp 14 06 2007 13 34 echt EI 4 CARING FOR AND CLEANING YOUR APPLIANCE Warning Always unplug the hood before cleaning it or performing other maintenance acts Regular maintenance of your appliance is a guarantee of proper functioning good performance and durability Warning Failure to respect the guidelines for cleaning the appliance and filters may cause fires Please carefully adhere to the maintenance recommendations e CLEANING THE FILTER CARTRIDGES They must be cleaned after approximately 30 hours of use or at least once a month These filtres can be cleaned in a vertical position in your dishwasher Use a brush hot water and mild detergent Rinse and dry them thoroughly before returning them to the hood e Dismantling the filtre cartridge Push the integrated handle on the filter cartridge fig 1 Tip the filter cartridge downward fig 2 e CHANGING THE CARBON FILTER Replace it after approximately 120 hours of use Remove the filter cartridges fig 3 Place the carbon filter on the filter cartridge on the inside of the hood Pull the two fastener clips over each side of the filter cartridge Repeat these steps for all the filter cartridges 60 4 99642621 A ML qxp 14 06 2007 13 34 zb 4 CARING FOR AND CLEANING YOUR APPLIANCE EN e CLEANING THE OUTER SURFACES To clean the outside of your hood use soapy water but
18. re you will find our latest innovations as well as useful and complementary information DE DIETRICH Setting New Values As part of our commitment to constantly improving our products we reserve the right to make changes to them based on technical advances to their technical and functional features and appearance Warning Before installing and using your appliance please carefully read this Guide to Installation and Use which will allow you to quickly familiarise yourself with its operation www dedietrich electromenager com h 44 A 99642621 A ML qxp 14 06 2007 13 33 cb TABLE OF CONTENTS EN 1 NOTICES TO THE USER e Safety recommendations 46 e Environmental protection 47 e Description of your appliance 48 2 INSTALLING YOUR APPLIANCE e Using the evacuation version 49 e Using the recycling version 49 e Electrical connection 50 e Assembling the hood 51 e Assembling the ventilation shaft Outdoor evacuation 52 Recycling 53 3 USING YOUR APPLIANCE e Description of the controls 54 e Starting the hood 55 e Stopping the hood 55 e Changing the speed 55 e Delayed stop 56 e Light 56 e Locking the control panel 56 e Recirculation mode 57 e Extraction mode 58 e Saturated filter cartridge 59 e Saturated carbon filter 59 e Auto stop fan 59 e Auto stop lighting 59 4 CARING FOR AND CLEANING YOUR APPLIANCE e Cleaning th

Download Pdf Manuals

image

Related Search

Related Contents

Mitsubishi Electric SPI-521V  3 Button Remote - The Genie Company  DigiVue Voice Logger DigiVue Voice Logger DigiVue Voice Logger  uni-directional current-driven approach lighting system psuc  BEXIDERMIL crema    Manuel d`utilisation  Cables Direct 0.48m ATA-133  Emerson CP400 Instruction Manual  組成成  

Copyright © All rights reserved.
Failed to retrieve file