Advantek Networks ANS-05P network switch
Contents
1. Company has an on going policy of upgrading its products and it may be possible that information in this document is not up to date Please check with your local distributors for the latest information No part of this document can be copied or reproduced in any form without written consent from the company Trademarks All trade names and trademarks are the properties of their respective companies General Description Advantek Networks ANS 05P is a powerful high performance Fast Ethernet switch with all 5 ports capable of 10 or 100Mbps auto negotiation operation Nway which means the switch could automatically negotiate with the connection on the network speed and in duplex mode It is ideal for micro segmenting large networks into smaller connected subnets for improving performance enabling the bandwidth demanding contents multimedia and imaging applications to be transferred efficiently Moreover the 10 100Mbps auto sensing ability provides an easy way to migrate 10Mbps to 100Mbps network with no hassle Compared to the shared 10Mbps or 100Mbps networks the Ethernet Switch delivers a dedicated 10 100Mbps connection to every attached client with no bandwidth congestion issue Product Features Complies with 1OBASE T specifications of the IEEE802 3 standard Complies with 1OOBASE TX specifications of the IEEE802 3u standard 5 x RJ 45 ports for 100Base TX and 10Base T connectivity Supports Nway protocol for speed 102. 100Mbps and duplex mode Half Full auto detection Supports full and half duplex operation on all ports Supports back pressure half duplex and flow control IEEE802 3x Wire speed packet filtering and forwarding rate Store and forward architecture filters fragment amp CRC error packets Supports extensive LED indicators for network diagnostics External power adapter Supports MDI MDI X auto crossover FCC Class B CE Package contents 5 port 10 100Mbps Ethernet Switch AC power adapter Quick installation guide If any of the items is damaged or missing please contact your retailer immediately Front panel LED indicators After installing the switch you can check its status from the LED indicators on the front panel shown below Front View LED Status Indication POWER PWR ON The switch is power on OFF The switch is power off LINK ACT ON A link is established BLINKING A link is established and data is being transmitted or received Rear panel ports LAA al Back View Ports 1x 5x The switch has five 10 100Mbps RJ 45 ports where you can connect computers or network devices to the switch AC IN This port connects the AC power adapter AC 9V 1A Power Connecting Plug the circle end of the power adapter firmly into the power port on the switch s rear panel and the other end into an electrical outlet then the system is ready Connecting computers to the switc
3. Adva ntek Networks 5 Port 10 100Mbps Ethernet Switch Quick Installation Guide Model ANS 05P FCC Warning This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC Rules These limitations are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into a different outlet from that the receiver is connected Consult your local distributors or an experienced radio TV technician for help Shielded interface cables must be used in order to comply with emission limits Changes or modifications to the equipment which are not approved by the party responsible for compliance could affect the user s authority to operate the equipment Copyright _ 1999 All Rights Reserved
4. h The switch features auto MDI MDIX crossover detection function and provides plug and play capability Users can immediately use any of the features of this product simply by plugging the network cables RJ 45 into the computers and the switch Uplink All Ports can be used as an uplink port for connecting to another unit without using crossover cable When using the uplink port you can extend the distance to 100m for linking another switch or hub To prolong the operational life of your units Never stack units more than eight high if freestanding Do not place objects on top of any unit or stack Do not obstruct any vents at the sides of the case WARNING Use only the AC power adapter that came with the switch to prevent damage to the unit
Download Pdf Manuals
Related Search