Home

Samsung SM940NW

Contents

1. HI nap w Install driver Install programs gt p ae Windows gt p M Natural Color gt p mgto MagicTune SyncMaster 740NW 940 NW The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement EE ita E Introduction Setup Adjusting Your Monitor Troubleshooting Specifications E Information Notational Power Installation Clean Others l Notational Please read the following safety instructions as they are designed to prevent damage to property and harm to the user CR Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment CR Notational Conventions S Prohibited db Q Do not disassemble Q Do not touch 5 Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Notational Power Installation Clean Others Power When not used for an extended period of time set your computer to DPMS If using a screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions Do not use a damaged or loose plug e This may cause electric shock or fire Do not pull the plug out
2. 10 Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps 1 Choose OK button on the Insert disk window 2 Click the Browse button on the File Needed window 3 Choose A D Driver then click the Open button and then click OK button How to install 1 Click Start Setting Control Panel 2 Double click the Display Icon 3 Choose the Settings tab and then click Advanced 4 Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button na maa So If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button 9 Microsoft Windows Millennium Operati
3. Click the Properties button on the Monitor tab and select Driver tab Plug and Play Monitor and HO Prophet NI Properties oat Plug and Play Monitor Proper ihre JI Gefoel Selection Q Cole Comeclion ema Daiwa General Adapter Morito Troubleshoot Color Management e hior amp q Pag aral Fiap Hodo acini ee Ca ears rias Marad sole ee Gharedard manta ippo Localiori on SD Pigphat i e Dievis tiui Thus clean ja sarako pacer C Hids mdai that this morilas carnat display Chenin thie check basa altiri pou lo takeet Arab khia IG HAL ely Ra cabalen maki Hila makan eich Tieubleshoot ka dipli neces octa Thig mag kad bo an marate ciel Sete ma rte r Horio omiteege Soren rolesh nate y EO Hans E Device urapi iiaa iha devices arabia Click Update Driver and select Install from a list or then click Next button Pligg ami Play Monitor Pio jpu r ties i Hartearg Update Wizard TU Mall Welcome to the Hardware Update AH Thin wind helps you instal aware tor irii Pig ard Play Moralia 8 1 2001 0 if pour hasdasaa come wih an metalsion CO at Napag dak mamit if nos To aay aiai ale ee ahi doa Ta updais Uva cheer foe iha davica What o jou mari the winard lo do ma CO retell Gap giliai poir Fiscommeraled Fict taok Drvar Lay ate oa ie drives poll i a hel ow Did Het lo connue Ci Cee Hardware Update Wizard a bhe Beh drea in h
4. Connecting the Monitor Rear of Computer Rear of Monitor Tn a DUPER OEE F Baiiia New Model Macintosh O Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet O Use appropriate connection for your computer Using the D sub Analog connector on the video card Connect the signal cable to the 15 pin D sub port on the back of your monitor 3 RGBIN Connected to a Macintosh Connect the monitor to the Macintosh computer using the D sub connection cable Z K If the monitor and the computer are connected you can turn them on and use them Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Using the Stand 2 Monitor Assembly Monitor and Bottom HAS Stand A Stand Stopper Attaching a Base This monitor accepts a 75 0 mm x 75 0 mm VESA compliant mounting interface pad ELDE H Simple stand HAS Stand O Monitor O Mounting interface pad Sold separately Turn off your monitor and unplug its power cord Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen Remove four screws and then remove the stand from the LCD monitor Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm t
5. SAMSUNG Opens the OSD menu Also use to exit the OSD menu or return to the previous menu MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently six different modes are available Custom Text Internet Game Sport and Movie Each mode has its own pre configured brightness value You can easily select one of six settings by simply pressing MagicBright control button 1 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu 2 Text For documentations or works involving heavy text 3 Internet For working with a mixture of images such as text and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD gt gt Click here to see an animation clip When OSD is not on the screen push the button to adjust brightness Adjust items in the menu Activates a highlighted menu item Use this button for auto adjustment Use this button for turning the monitor on and off This light glows blue during normal operation and blinks blue once as the monitor saves your adjustments CO See Powersaver described in the manual for further information r
6. The color and appearance of the product may vary depending on the model and the product penne tions are subject to change without prior notice for reasons of performance enhancement E Introduction Setup amp Adjusting Your Monitor Troubleshooting UA m Information General PowerSaver Preset Timing Modes General Model Name SyncMaster 940NW Size 19 Wide Diagonal 48 cm Display area 408 24mm H x 255 15mm V Pixel Pitch 0 2835 mm H x 0 2835 mm V Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 2M Hi FRC Optimum resolution 1440 x 900 60 Hz Maximum resolution 1440 x 900 75 Hz Input Signal Terminated RGB Analog 0 7Vp p Positive at 750 10 Separate H V sync Composite sync SOG TTL level positive or negative Maximum Pixel Clock 137MHz Analog Power Supply AC 100 240 V 10 96 50 60 Hz Signal Cable 15pin to 15pin D sub cable Detachable Dimensions WxHxD Without Stand 439 x 289 x 65 4 mm 17 2 x 11 3 x 2 5 inch Dimensions WxHxD Weight Simple Stand 439 x 360 7 x 200 mm 17 2 x 14 2 x 7 8 inch with Basic Stand 4 7 kg 10 3 Ibs Dimensions WxHxD Weight HAS Stand 439 x 327 3 x 200 mm 17 2 x 12 8 x 7 8 inch with Basic Stand 5 9 kg 13 0 Ibs VESA Mounting Interface 75 0 mm x 75 0 mm for use with Specialty Arm Mounting hardware Environmental con
7. Common Electrode ITO Color Filter Data Gate Bus Line TFT Pixel Electrode Storage Capacitor ITO Cs Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal
8. During normal operation of a LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas of the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention Power Off Screen Saver or Power Save Mode Ex e Turn the power off when using a stationary pattern Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use e Use a Screen saver if possible Screen saver in one color or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recommend that you follow set up of your display system program as below Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 T
9. 2 Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor Useful Tips e Amonitor recreates visual signals received from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer e Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1440 x 900 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on o If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition o In this case check the computer for trouble E Safety Instructions SyncMaster 740NW The color and appearance of the product may vary depending on the model and the product penne tions are subject to change without prior notice for reasons of performance enhancement E Introduction Setup amp Adjusting Your Monitor Troubleshooting UA m Information General PowerSaver Preset Timing Modes General Model Name SyncMaster 740NW Size 17 Wide Diagonal 43 cm Display area 372 5 mm H x 209 mm V Pixel Pitch 0 291 mm
10. click Continue ai He mad bal Pa O AO La ihm Pia dhed bye kiget ws ape dairy maan tage hi mie cannot abiy come ity Tha many legd 84 an utaha dopar ady daneg hrar This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Dirar Eitan SLE Cerrar erm EO ice To wawa dem aad Pa deve Bee Tia upakan Bray thew ae or Da daiga Bina drra aa ater pdng thee Scope ral eck bo teh Gere rliai citer Ti unirea Pa diar Aha Ca Haras Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer Hinay So AO WA CA le ci KO rove for dieser pour BN pe oT anang klan akan ee Bs ia Pan Search sutematically kot opdaded drier pitan I ma ralnan all nma kaya paan ml ll heeri a Tia Led on aan Nasa pra rv IF eir sahir Cee ed tel es te aaa A Let ome peck bom a ie of decks Scheer GA My comput Tba bn al Paa misiri iar ee al me upama r bhr ipnr ey n ee Bree Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Sambat She hpv ln you aal ten ANL Dar ei haitarit na FA nagwa MAYA AEE lo Te Pa ees AT iia Slate EG Na CE Pees cis EG bara p ia Pal a Pa a phy warg NG ee ghee rs Ca Paa eee ae Select the model that matches your monitor from the
11. http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button EN SAMSUNG monitor ineteller galedi the display adapter on which you wari io imal the maning EON 9580 Plug and Play Monitor Salsa the moadonshich you vegan bo ingtali 4 If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP Operating System Hardware Installation The software pou ane mabaling kor this arcane Samsung saa has mnok passed Ando Logo besing to wenly is compahbdiy wath Windows XP Tell ma why the testing 15 important Continuing your installation of this software may impair or destabilize the conmect operation of your system either immediately or in the future Microsell strongly recommends Ihat pou top this installation now and contact the hardware vendor for oftware that has passed Windows Loge testing Continue Arganay STOP Installation CO This monitor driver is under certifying MS logo and this installation don t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 5 Monitor driver installation is completed Connecting the Monitor Using the Stand Installing the
12. a gt ff gt F gt E gt MENU The tone of the color can be changed and one of four modes can be selected Cool Normal Warm and Custom Cool Makes whites bluish Color Tone Normal Keeps whites white Warm Makes whites reddish Custom Select this mode when you want to adjust the image according to your preferences MENU gt a gt H gt T gt fa gt MENU Adjusts individual R G B color balance Color Control MENU gt 4 7 gt H gt a T gt El gt a F gt gt MENU Gamma correction changes the luminance of the colors with intermediate luminance e Mode 1 e Mode 2 e Mode 3 MENU gt gt H gt T gt gt MENU UP O Image M Coarse Sharpness H Position V Position OSD E Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Q Q Available in analog mode only MENU gt 7 gt gt gt gt MENU Removes noise such as horizontal stripes If the noise persists even after fine tuning repeat it after adjusting the frequency clock speed Available in analog mode only Q Q MENU gt gt H gt T gt H gt MENU Changes the clearance of image Q Q MENU gt gt H gt T gt H gt MENU Changes the horizontal position of the monitor s en
13. gt T gt H gt gt MENU Color parameters are replaced with the factory default Color Reset values Qo Q MENU gt gt H gt T gt H gt MENU O Information W Mon beserptiom Shows a video source display mode on the OSD screen Information MENU gt gt MENU 10 MagicTune HELP S Installation Insert the installation CD into the CD ROM drive Click the MagicTune installation file Select installation Language Click Next When the Installation Shield Wizard window appears click Next Select I agree to the terms of the license agreement to accept the terms of use Choose a folder to install the MagicTune program Click Install The Installation Status window appears Click Finish When the installation is complete the MagicTune executable icon appears on your desktop Double click the icon to start the program Hi MagicTune execution icon may not appear depending on specification of computer system or monitor If that happens press F5 Key if Ture P Se EE PEREREDELEPEEDEDENEDELEPEE EHE S PSSST SSS SSS PSSST SPSS ESET eS eS SFP CS SSPE STS SSS SPSS SPS SPSS SPSS SSS PSPS SSS EPSPS SSeS LS ee Installation Problems The installation of MagicTune can be affected by such factors as the video card motherboard and the network environment D System Requirements OS Windows 2000 Windows XP H
14. www samsung com au http www samsung com cn http www samsung com hk http www samsung com in http www samsung com id http www samsung com jp http www samsung com my PHILIPPINES 1800 10 SAMSUNG 7267864 http www samsung com ph SINGAPORE 1800 SAMSUNG 7267864 http www samsung com sg THAILAND 1800 29 3232 02 689 3232 http www samsung com th TAIWAN 0800 329 999 http www samsung com tw VIETNAM 1 800 588 889 http www samsung com vn Middle East 8 Africa SOUTH AFRICA 0860 7267864 SAMSUNG http www samsung com za U A E 800SAMSUNG 7267864 8000 4726 http www samsung com mea Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal Terms Q O Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance between two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal F
15. Check List Q amp A Self Test Feature Check Self Test Feature Check Self Test Feature Check Warning Messages Environment Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Not Optimum Mode Recommended Mode 1440 x 300 60Hz Environment The location and the position of the monitor may influence the quality and other features of the monitor 1 If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room
16. Clone 10 Monitor driver installation is completed 9 Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps 1 Choose OK button on the Insert disk window 2 Click the Browse button on the File Needed window 3 Choose A D Driver then click the Open button and then click OK button How to install 1 Click Start Setting Control Panel 2 Double click the Display Icon 3 Choose the Settings tab and then click Advanced 4 Choose Monitor Case1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button Oo maa S OoN If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button 2 Microsoft Windows Millennium
17. Installation Instructions To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel gt Performance and Maintenance gt System gt Hardware gt Device Manager gt Monitors gt After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune Download the latest program The program can be downloaded http www samsung com monitor magictune Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program CO Visit the MagicTune website and download the installation software for MagicTune aA MAC o Check the following items if there is trouble with the monitor aaa Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an after service for the main board of the computer 3 If you installed a new video card or if you assembled
18. SyncMaster 740NW The color and appearance of the product may wary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement Bm Safety Instructions Ta E Setup B Adjusting Your Monitor Troubleshooting Specifications E Information Unpacking Front Rear Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking 2 Without stand Monitor 2 With stand Monitor 4 Simple Stand Bottom 2 Manual Warranty Card User s Guide Registration Card Monitor Driver Quick Setup Guide Not available in all Natural Color software locations MagicTune software 2 Cable D sub Cable Power Cord Unpacking Front Rear Front SAMSUNG g MENU button M Opens the OSD menu Also use to exit the OSD menu or return to the previous menu 3 MagicBright MagicBright is a new feature providing optimum viewing ata environment depending on the contents of the image you are watching Currently six different modes are available Custom Text Internet Game Sport and Movie Each mode has its own pre configured brightness value You can easily select one of six settings by simply pressing MagicBright control button 1 Custom Although the values are carefully chosen by our engineers the pre configured val
19. Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes Note If the initial screen the login screen does not appear contact the Service Center or your dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly The monitor is in PowerSaver mode press a key on the keyboard to activate the monitor and restore the image on the screen Unlock the OSD by pressing the MENU button for at least 5 seconds Check the signal cable connection Make sure the video card is fully inserted in it s slot The screen suddenly has become unbalanced The screen is out of focus Or OSD cannot be adjusted LED is blinking but no images on the screen There are only 16 colors shown on the screen The screen colors have changed after changing the video card There isa message that reads Unrecognized monitor Plug amp Play VESA DDC monitor found Check when MagicTune does not function properly MagicTune doesn t work properly Have the screen colors become strange after running a program or due to a crash between applications Has the video card been set properly Have you changed the video card or the driver Have you adjusted the resolution or frequency to the mo
20. X86Config file which is a type of system setting file Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other requested hardware Oo oe NS ma O Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual O Natural Color Natural Color Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyrightic 2003 Samsung Electronics Ca Ltd One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Electronics am
21. by the wire nor touch the plug with wet hands e This may cause electric shock or fire Use only a properly grounded plug and receptacle e An improper ground may cause electric shock or equipment damage Class Equipment only Insert the power plug firmly so that it does not come loose e A bad connection may cause fire Do not excessively bend the plug and wire nor place heavy objects upon them which could cause damage e This may cause electric shock or fire Do not connect too many extension cords or plugs to one outlet e This may cause fire Do not disconnect the power cord while using the monitor e A surge may be caused by the separation and may damage the monitor Do not use the power cord when the connector or plug is dusty e f the connector or plug of the power cord is dusty clean it with a dry cloth e Using the power cord with a dusty plug or connector may cause electric shock or fire To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable e This may cause electric shock or fire Notational Power Installation Clean Others Installation Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports tra
22. is not from bad quality and you can use it without uneasiness e For example the number of TFT LCD sub pixels that is contained in this product are 2 764 800 Note Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment General PowerSaver Preset Timing Modes PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor into a low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use a software utility installed on your computer to set up this feature Power off Normal Operation Power saving mode Power button OFF EPA ENERGY 2000 Power Indicator Blue Blue Blinking Black Power Consumption Less than 20 W Less than 1 W Less than 1 W This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used wi
23. support for Magictune Specifications subject to change without notice Magictune is a trademark of SAMSUNG ELECTRONICS CO Inc Windows is 4 registered trademark of Microsoft Corp Other trademarks are property of their respective holders E Safety Instructions B Introduction Check List SyncMaster 740NW The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Setup E Adjusting Your Monitor WU amp Specifications E Information Self Test Feature Check Check List Q amp A v Before calling for service check the information in this section to see if you can remedy any pa l problems yourself If you do need assistance please call the phone number on the Information section or contact your dealer No images on the screen cannot turn on the monitor cannot see the On Screen Display The screen shows strange colors or just black and white Is the power cord connected properly Can you see Check Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Not Optimum Mode Recommended Mode 1280 X 720 60 Hz on the screen There is no image on the screen Is the power indicator on the monitor blinking at 1 se
24. the PC check if the installed the adapter video driver and the monitor driver 4 Check if the scanning ratio of the video screen is set at 56 Hz 75 Hz Do not exceed 75 Hz when using the maximum resolution 5 If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter at the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver NN p If problems repeatedly occur contact an authorized service center IN Check List Q amp A Self Test Feature Check O Q amp A How can change the Frequency can be changed by reconfiguring the video card frequency Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can adjust the resolution Windows ME XP 2000 Set the resolution at the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving Windows ME XP 2000 Set the function at BIOS SETUP of the function computer or the screen saver Refer to Windows Computer Manual How can clean the outer Disconnect the power cord and then clean the monitor with a soft case LCD Panel cloth using either a cleaning solution or plain water Do not leave any remains of the detergent nor scratch the case Do not allow any water to go inside the monitor
25. the monitor Do not place the monitor face down e This may damage the TFT LCD surface The installation of the bracket must be done by a qualified professional Installing a wall bracket must be done by a qualified professional e Installing the bracket by unqualified personnel may result in injury e Always use the mounting device specified in the owner s manual When installing the product make sure to keep it away from the wall more than 10 cm 4 inches for ventilation purposes e Poor ventilation may cause an increase in the internal temperature of the product resulting in a shortened component life and degraded performance Keep the plastic packaging bag out of children s reach e The plastic packaging bag may cause suffocation if children play with it Notational Power Installation Clean Others When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric Do not spray water or detergent directly onto the monitor e This may cause damage electric shock or fire Use the recommended detergent with a smooth cloth If the connector between the plug and the pin is dusty or dirty clean it properly using a dry cloth e A dirty connector may cause electric shock or fire Q Make sure to unplug the power cord before cleaning the product e Otherwise this may cause electric shock or fire Unplug the power cord from the power outlet and w
26. to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product Windows ME 2000 XP Set the colors properly at the Control Panel Display Settings Set the video card by referring to the video card manual Install the monitor driver according to the Driver Installation Instructions Install the monitor driver according to the Driver Installation Instructions To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel gt Performance and Maintenance gt System gt Hardware gt Device Manager gt Monitors gt After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune Download the latest program The program can be downloaded http www samsung com monitor magictune Reboot the computer after installing the program for the first time If a copy of the program is already installed remove it reboot the computer and then install the program again You need to reboot the computer for it to operate normally after installing or removing the program CO Visit the MagicTune website and
27. BM 640 x 480 IBM 720 x 400 MAC 640 x 480 MAC 832 x 624 MAC 1152 x 870 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA 1152 x 864 VESA 1280 x 960 VESA 1280 x 1024 VESA 1280 x 1024 VESA 1440 x 900 VESA 1440 x 900 Horizontal Frequency kH2 Vertical Frequency Hz Horizontal Frequency Pixel Clock MHz 25 175 25 175 28 322 30 240 57 284 100 000 31 500 31 500 36 000 40 000 49 500 50 000 65 000 75 000 78 750 108 000 108 000 108 000 135 00 106 500 136 750 Sync Polarity H V The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called Vertical Frequency or Refresh Rate Unit Hz E Safety Instructions E Introduction The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Setup E Adjusting Your Monitor Troubleshooting Specifications Contact SAMSUNG WORLDWIDE Terms Contact SAMSUNG WORLDWID
28. E For Better Display Authority Correct Disposal CO If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP DOMINICA TRINIDAD 8 TOBAGO VENEZUELA North America 1 800 SAMSUNG 7267864 1 800 SAMSUNG 7267864 01 800 SAMSUNG 7267864 Latin America 0800 333 3733 4004 0000 800 726 7864 SAMSUNG 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 1 800 234 7267 800 7267 1 800 682 3180 1 800 751 2676 1 800 7267 864 0 800 100 5303 http www samsung com http www samsung com ca http www samsung com mx http www samsung com ar http www samsung com br http www samsung com cl http www samsung com co http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin Europe Informatian BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL REPUBLIC OF IRELAND SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN RUSSIA UKRAINE UZBEKISTAN AUSTRA
29. H x 0 291 mm V Horizontal 30 61 kHz Vertical 56 75Hz Display Color 6 bit color 262K Optimum resolution 1280x720 60Hz Maximum resolution 1280x720 60Hz Input Signal Terminated separate H V sync Composite SOG 75 0410 Maximum Pixel Clock 81MHz Analog Signal Cable 15pin to 15pin D sub cable Dimensions WxHxD Without Stand 404 5 x 247 5 x 60 5 mm 15 9 x 9 7 x 2 3 inch Dimensions WxHxD Weight With Stand 404 5 x 319 2 x 200 0 mm 15 9 x 12 5 x 7 8 inch 3 1 kg 6 8 Ibs VESA Mounting Interface 75 mm x 75 mm for use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 10 C 40 C 50 F 104 F Humidity 10 80 non condensing Storage Temperature 20 C 45 C 4 F 113 F Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings In most cases monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This
30. LIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA 02 201 2418 844 000 844 Distributor pro Ceskou republiku http www samsung com be http www samsung com cz Samsung Zit Ceska organiza n slo ka yskocilova 4 14000 Praha 4 70 70 19 70 030 6227 515 3260 SAMSUNG 7267864 0 15 min 01805 121213 0 14 Min 06 80 SAMSUNG 7267864 800 SAMSUNG 7267864 0032 0 2 201 24 18 0900 20 200 88 0 10 Min 815 56 480 0 801 801 881 80 8 200 128 0818 717 100 0800 SAMSUNG 7267864 902 10 11 30 0771 400 200 0800 7267864 0870 SAMSUNG 7267864 800 7267 800 7267 8 800 77777 8 800 080 1188 8 800 200 0400 8 800 502 0000 140 1234 Asia Pacific 1300 362 603 800 810 5858 010 6475 1880 3698 4698 3030 8282 1800 1100 11 0800 112 8888 0120 327 527 1800 88 9999 http www samsung com dk http www samsung com fi http www samsung com fr http www samsung de http www samsung com hu http www samsung convit http www samsung lu http www samsung com nl http www samsung com no http www samsung com pl http www samsung com pt http www samsung com uk http www samsung com sk http www samsung com es http www samsung com se http www samsung com ch http www samsung com uk http www samsung ee http www samsung com lv http www samsung It http www samsung kz http www samsung ru http www samsung com ur http www samsung Uuz http
31. Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual 9 Installing the Monitor Driver Manual Windows Vista Windows XP Windows 2000 Windows ME Windows NT Linux ra When prompted by the operating system for the monitor driver insert the CD ROM included an with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http Awww samsungmonitor com cn China 9 Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click 4 Start and Control Panel Then double click on Appearance and Personalization Cae epe p eS Se SS SS eres ee meg e e e AA rryryyyhowrw x4 MENI a ee a ee ee ee eee a be ae ee TEE ey Ey e gg lM ar Se ee ee ee eg pame kaai LS ii a tig pan Dang Bhe ote bo match yo od L flutit Meriter bh MS Gefin hE LE lina Dap F 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below
32. Operating System Click Start Setting Control Panel Double click Display icon Select the Settings tab and click Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box maa PO NG UA maa _ 9 Microsoft Windows NT Operating System 1 Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency r If there is no Mode at All Display Modes select the level of resolution and vertical frequency ar by referring to the Preset Timing Modes in the user guide 2 Linux Operating System To execute X Window you need to ma
33. alling the Monitor Driver Manual Windows Vista Windows XP Windows 2000 Windows ME Windows NT Linux v7 wt Ed e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China 9 Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP Operating System This monitor driver is under certifying MS logo and this installation don t damage E your system The certified driver will be posted on Samsung Monitor homepage Manual When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below 2 Click Start and Control Panel Then double click on Appearance and Personalization bio ai PG PG a mama Aa l pag Taw eb Oe Wal 2 Si oe o ie try Aa Gees el hai Ng ame mo poo hap Ii hh a L 1 rar hang r CU rT TS mc e ma ee mmc ee a mama ae Ps T GP eee ee ee ee e e ee ap ee eee r rrryryyry4 ew a a oe ee oe mow ee
34. asa koso Selec the manuiisctuer amd model of your hasan desca and then chek Hasi II you Cae hae a dik thal certain tha Give you viari to alak chick Have Dik Ube the check biat basaan ba kmi oe paih and nemenable media The beat d Seach namowabla peda Bopp COM Inckude this Ipcation in the aah Choose tha option bo seedi thee desce drea hom a ki Wirda does mot guistanded that the deer pou chess wall ba the bagi match for pour harks Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button install From Disk Hardware Update Wizard Selec the dewee diei pou want bo oneal bor thin harden rebel Fa manulachuset s matallabon dik and then make awe tral the pueg dive i selected below Tolasi the mamuo aed modal of pour kanaan Geese rin i Hesd IP pi hana a dik iha Sanang ha dai nG mara ba miball ekek Hayo Dok Moda Samaung seas Copy marulachurer s Mes hom iy Thin driwer is rot digitally signed Det re he dra paren i merry i 8 If you can see following Message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou ane installing for this hardware Samsung sawa has ot paced Wand Logo bedi ko wendy d compabbdiy with inhoa AP Tall nas waka thee bagting is impsitard Continuing pon installation of this zoe mag impir or destabilize the conect operation of your system e
35. ba the dilivet Eor rental boon a best og pech locabon ected Did Het lo ort Select Don t search will then click Next and then click Have disk Hardware Update Wizard este chooce gma search and inalallabion opine i Seaechitor the bet drva in these locations Ube the check basang babyer bp kmi oa apan iha delay pathi and arabe eka The bett dret board wall be r Dont search wall choose the deer ko mhal Choe this cp bon ko sedi the dee drea homa ki Wree does ma quae that Ghee en paa chaga mall ba iha bast match For you hadaa CA Hardware Update Wizard Taksi the devine diver piu want bo install hoa this hardware G ksal iha mamula ard modal of pour hakikaata dead ond then chek Meet oa NG aaa dik that nana tha d rs ou yani lo inated ook Hawa Diik Hir ganpahbla heana Model Ong Pinag an Pay Hiari KJ This de in daly inad stock Cim Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Install From Disk ineert the manulachuser s installahon dak and then make swe thal the comect dive is selected below Copy manulachurer s fies hom i Hardware Update Wizard Selec the dower diei you want bo malal bor thio harden Sa bha minie e modal ol pour kanda there and ban e Wed IN pte has a dak that Sanang iho isi yai mari bi miball chek Hawa Dot Moda Samsung kisa JB Tha diwe a ppl ditali gnad Ta
36. ck of the monitor Plug the power cord for the monitor into a nearby outlet Use appropriate connection for your computer Using the D sub Analog connector on the video card Connect the signal cable to the 15 pin D sub port on the back of your monitor 3 RGBIN Connected to a Macintosh Connect the monitor to the Macintosh computer using the D sub connection cable A 2 If the monitor and the computer are connected you can turn them on and use them Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Using the Stand 2 Monitor Assembly Monitor and Bottom Attaching a Base This monitor accepts a 75 0 mm x 75 0 mm VESA compliant mounting interface pad Simple stand O Monitor O Mounting interface pad Sold separately Turn off your monitor and unplug its power cord Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen Remove four screws and then remove the stand from the LCD monitor Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm type base wall mount hanger or other base ON A e Do not use screws longer than the standard dimension as they may damage the inside of the Monitor e For wall mounts that do not comply with VESA standard screw specifications the length of the screw
37. cond intervals Have you locked the On Screen Display OSD Menu to prevent changes Is the screen displaying only one color as if looking at the screen through a cellophane paper Check the power cord connection and supply Connected using the D sub cable Check the signal cable connection If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes Note If the initial screen the login screen does not appear contact the Service Center or your dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly The monitor is in PowerSaver mode press a key on the keyboard to activate the monitor and restore the image on the screen Unlock the OSD by pressing the MENU button for at least 5 seconds Check the signal cable connection Make sure the video card is fully inserted in it s slot The screen suddenly has become unbalanced The screen is out of focus Or OSD cannot be adjusted LED is blinking but no images on the screen There are only 16 colors shown on the screen The screen colors have changed after changing the video card There isa message that reads Unreco
38. ctronics amp Telecommunications Research Institute ETRI This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images For more information refer to Help F1 in the software program Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD ROM Drive The initial Natural Color screen will appear Click on Natural Color in the startup window to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Windows Start button select Run Enter D color NCProsetup exe and then press the lt Enter gt key If the drive where the CD is inserted is not D enter the applicable drive Uninstalling the Natural Color Software Program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement Safety Instructions E Introduction Setup POCA Cuca E Troubleshooting Specifications E Information User Control Buttons Direct Functions OSD Functions ea MagicTune fm MENL 1 menu Use this button
39. dicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Not Optimum Mode Recommended Mode I2BUxXxr 0 60Hz O Environment The location and the position of the monitor may influence the quality and other features of the monitor 1 If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room 2 Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monitor O Useful Tips e A monitor recreates visual signals received from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer e Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1280 X 720 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on o If there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition o In this case check the computer for trouble E Safety Instructions o B Introduction Check List SyncMaster 940NW The color and appearance of the product may vary depending on th
40. download the installation software for MagicTune aA MAC o Check the following items if there is trouble with the monitor Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an after service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if the installed the adapter video driver and the monitor driver 4 Check if the scanning ratio of the video screen is set at 56 Hz 60 Hz Do not exceed 60 Hz when using the maximum resolution 5 If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter at the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver aaa a Lv ped a If problems repeatedly occur contact an authorized service center IN Check List Q amp A Self Test Feature Check Q amp A How can I change the Frequency can be changed by reconfiguring the video card frequency Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can I adjust the resolution Windows ME XP 2000 Set the resolution at the Control Panel Display gt Settings Contact the video card manufacturer for details How can set the Power Sa
41. e model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Setup E Adjusting Your Monitor WU amp Specifications E Information Self Test Feature Check Check List Q amp A v Before calling for service check the information in this section to see if you can remedy any pa l problems yourself If you do need assistance please call the phone number on the Information section or contact your dealer No images on the screen cannot turn on the monitor cannot see the On Screen Display The screen shows strange colors or just black and white Is the power cord connected properly Can you see Check Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Not Optimum Mode Recommended Mode 1440 x 900 60 Hz on the screen There is no image on the screen Is the power indicator on the monitor blinking at 1 second intervals Have you locked the On Screen Display OSD Menu to prevent changes Is the screen displaying only one color as if looking at the screen through a cellophane paper Check the power cord connection and supply Connected using the D sub cable Check the signal cable connection If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for
42. e without notice 2007 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPMS and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have an image retention when switching from one image to another especially after displaying a stationary image for a long time This guide is to demonstrate a correct usage of LCD products in order to protect them from Image retention Warranty Q Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty What is Image retention
43. egarding power saving Pagi functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Unpacking Front Rear Rear Simple stand HAS Stand The configuration at the back of the monitor may vary from product to product D POWER port Connect the power cord for your monitor to the power port on the back of the monitor 2 RGB IN port Connect the signal cable to the 15 pin D sub port on the back of your monitor a Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place The locking device has to be purchased separately For using a locking device contact where you purchase it v h A See Connecting the Monitor for further information regarding cable connections SyncMaster 740NW The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement B Safety Instructions E Introduction E Adjusting Your Monitor E Troubleshooting Specifications E Information Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual Connecting the Monitor Rear of Computer Rear of Monitor z New Model Macintosh Connect the power cord for your monitor to the power port on the ba
44. gnized monitor Plug amp Play VESA DDC monitor found Check when MagicTune does not function properly MagicTune doesn t work properly Have the screen colors become strange after running a program or due to a crash between applications Has the video card been set properly Have you changed the video card or the driver Have you adjusted the resolution or frequency to the monitor Reboot the computer Set the video card by referring to the video card manual Adjust screen image position and size using the OSD Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD Have you adjusted the resolution or frequency on the monitor Is the frequency properly adjusted when checking the Display Timing on the menu Have the Windows colors been set properly Has the video card been set properly Have you installed the monitor driver See the video card manual to see if the Plug amp Play VESA DDC function can be supported MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play Have you changed your PC or video graphic card Did you install the program Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes Adjust the frequency properly by referring
45. in stations etc Failure to do so may cause serious damage to your monitor Place your monitor in a location with low humidity and a minimum of dust e Failure to do so may cause electric shock or fire inside the monitor Do not drop the monitor when moving it e This may cause damage to the product or the person carrying it Fo Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf e Dropping the product may cause damage to the product or the person carrying it Q Do not place the product on an unstable or small surface area PA wy e Place the product on an even and stable surface as the product may fall and Tad cause harm to someone walking by specifically children EA LO Do not place the product on the floor e Take care as someone specifically children may trip over it NG Uk TO PREVENT THE SPREAD OF FIRE KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES e Otherwise this may cause fire A melted coating may cause electric shock or fire Keep any heating devices away from the power cable e A melted coating may lead to electric shock or fire Do not install the product in places with poor ventilation for instance a Clean bookshelf closet etc e Any increase in the internal temperature may cause fire Put down the monitor carefully e Failing to do so may damage
46. in D sub port on the back of your monitor a Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place The locking device has to be purchased separately For using a locking device contact where you purchase it T t N See Connecting the Monitor for further information regarding cable connections SyncMaster 940NW The color and appearance of the product may wary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement Bm Safety Instructions Ta E Setup B Adjusting Your Monitor Troubleshooting Specifications E Information Unpacking Front Rear Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking 2 Without stand Monitor 2 With stand Monitor amp Simple Stand Bottom Monitor amp HAS Stand Manual Warranty Card Registration Card Quick Setup Guide Not available in all locations 2 Cable D sub Cable Power Cord Unpacking Front User s Guide Monitor Driver Natural Color software MagicTune software Front Rear D o 006690 MENU button I MagicBright ata Brightness button 0 Adjust buttons a Enter button E AUTO button Power button Power indicator
47. ipe the product using a soft dry cloth e Do not use any chemicals such as wax benzene alcohol thinners insecticide air freshener lubricant or detergent Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year e Keep the product s interior clean Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire Notational Power Installation Clean Others Others Do not remove the cover or back e This may cause electric shock or fire e Refer to a qualified servicing company N If your monitor does not operate normally in particular if there is any unusual sound or smell coming from the monitor unplug it immediately and contact an authorized dealer or the Service Center e This may cause electric shock or fire Keep the product away from places exposed to oil smoke or moisture do not install inside a vehicle e This may cause a malfunction electric shock or fire e In particular avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain If the monitor is dropped or the casing is damaged turn the monitor off and unplug the power cord Then contact the Service Center e The monitor may malfunction causing electric shock or fire 2 Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of
48. ither immediately or m the future Mocrosoft strongly recommends thal gow tap hit installation now and Contact he handwane vendor for software that haz passed Windows Loge testing STOP Instalshon This monitor driver is under certified MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 9 Click the Close button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wizard Tike vatad ba hamba ethan the softener ka a Samsung seas Cheb Fath lo dope Ba wata ym Marior Ep KA ai by NO Mago LX BES z Plug and Play Monitor amd AF Erophot IN froporiion kaa H a GeForce SE Gavin t LIPS aa 9 Colo Conectien Sir Hapis BAE DAKO Mee Speech abo Gorens PT GT Moros Trebino hee Color hjara Ce ETHE Fleur eye m Pte maf Pte Maia Drives Date a 1172001 U Error Dawa Yea page 1 0 00 Powe oe Chipia Gaga Nit gab beget Soren aaah asta AD Hais Detect Preia Se B Drea Daksis To waa dekada about tha dra hoa E Hkis ades en tle arrose soie or Cisa ka tiie a kua alee ama ii NG bre naaa ONH a ache Bo pap m h Thim pare viet eel bo et Lares CBee Dimas Driver Toundate the diver for this device aneifor damad har T f tha garia bada ator upang iho diyes roll L Hol Back Driva E back bo iFa pawis arabe ceira Lirah To urmata the dra darrell Che __
49. ke the X86Config file which is a type of system setting file Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other requested hardware Santo as aN Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Aubomatic Manual O Natural Color Natural Color Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyrightic 2003 Samsung Electronics Ca Ltd One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Ele
50. l ma vin dren marina ki moorland If you can see following Message window then click the Continue Anyway button Then click OK button Hardware Installation A The sofware you ane installing for this hardware Samsung sawa has mnok passed w mibo Logo kadimg ko wendy d compabbdiy wal Wingo SP Tel rea aka his basing it ipta Continuing your installation of thiz softem map impir or destabilize the comeci operation of your system either immediately of m the future Mocrosoft strongly recommends thal gow top hit installation now and contact the hardware vendor for software that haz passed Windows Loge testing This monitor driver is under certified MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com 9 Click the Close button then click OK button continually Hardearo Update Wizard Completing the Hardware Update Wizard The vatad ba iriad miang the softener ka Samsung sawa ni Cheb Fath lo dope Ba wate Svar ER ERE Mapictvynchacionr LX BES Plug and Play Monitor amd AF Erophot NN roporiwoe m7 5a eo Gene a Dirai ca SyroMasie fae Be Hagyma abe eee Samsung WTO 1 0 Hat Gee ally beret To vira datai about tha dra Glos Tio Ladle thes Genser tow thie cern ha daa bada atar upang iho diyes roll uk bald daya back bo ika pisara To uninaali the dra dared L
51. list of monitor models on the screen and click Next Sohne the dna dina you ward o ball fee tha hardware kA Tie Pa Siri iiare i Aka diene deed Par cing aml Fria baa Paa a Phat re pin mal LG al em Kes Ck 10 Click Close Close gt OK i i Gan hat ductal plated yo bket setae kA Sampung enn Pa roa ain aa Bi back th Pa pea ma H This is my main mormor fa tend the dektop onto the mortor 2 Microsoft Windows XP Operating System 1 Insert CD into the CD ROM driver 2 Click Start 5 Control Panel then click the Appearance and Themes Icon E i Erter je Pye aap ea inter Cage Ko mina z peo i Es Piy Hasan Darimana al Cui Capra Cp big Pact pa Ha paraan a II PET 10 0 ES Py Punai Ey Hinbagaa Lk Ph Compare W Pari P Lord Panai G3 Vitor Media Maror ia Primera are Paes aa MSM Explorar a hiap and Susport na a aa Paa er moe Pa C9 ia or anan Frem HU Callo a a by pwo A karaang eee et a PE herders Movie maker J oe ee rian 0 Programs E gt 3 Click Display icon and choose the Settings tab then click Advanced Radke treo a Bayaarad Display Pe peer Ee Tae Clear Goren Sawer Agqanararnce Gelinga Pick a task E maa a aaa ia b keg Mg Arig ha ir am eee E p a ra ri Dingpsag or pick a Control Panel icon MAG Kaka aan a AK np po Ka Gian de h s y Doku cpa S PP aika pna Higa 327 est
52. modes Custom Text Internet Game Sport Movie Brightness a a77 a Brightness When OSD is not on the screen push the button to adjust brightness User Control Buttons Direct Functions OSD Functions sakipelyar MagicTune E Picture Brightness MagioColor Color Control Hl image Coarse Fine Sharpness H Position V Position E osp Language _ H Position V Position Transparency Display Time E Setup Image Reset Color Reset Information Picture You can use the on screen menus to change the brightness according to personal preference Brightness Direct Access Feature When OSD is not on the screen Q Q push the 1 button to adjust brightness MENU gt gt E gt a MENU You can use the on screen menus to change the contrast Contract according to personal preference Q Q MENU gt H gt 1 3 H gt gt MENU O Color MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality 1 Off Returns to the original mode 2 Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left 3 Full Displays not only vivid natural color but also more realistic natural skin color with clearness 4 Intelligent Displays vivid natural color with clearness MagicColor MENU gt
53. ng System Click Start Setting Control Panel Double click Display icon Select the Settings tab and click Advanced Properties button Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box oO IDA PN maa _ 9 Microsoft Windows NT Operating System 1 Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency CO If there is no Mode at All Display Modes select the level of resolution and vertical frequency KEN by referring to the Preset Timing Modes in the user guide 2 Linux Operating System To execute X Window you need to make the
54. nge the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time Adjust the resolution and frequency to the level appropriate for the model e An inappropriate resolution may cause undesirable picture quality 17 inch 43 cm 1280 X 720 19inch 48 cm 1440 X 900 Viewing the monitor continuously at a too close angle may result in damage to your eyesight To ease eye strain take at least a five minute break after every hour of using the monitor 2 Do not install the product on an unstable uneven surface or a location prone to tow vibrations q a e Dropping the product may cause damage to the product or the person carrying it Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire 2 When moving the monitor turn off and unplug the power cord CI J Make sure that all cables including the antenna cable and cables connected to other devices are disconnected before moving the monitor re NG e Failure to disconnect cables may damage it and cause fire or electric shock a Bo Place the product out of children s reach as they could damage by hanging SE Mm onto it i 4 ar by 16d i e A falling product may cause injury to the person or even fatality Eo 7 ry NG When not using the product for an extended period of time keep the p
55. nitor Reboot the computer Set the video card by referring to the video card manual Adjust screen image position and size using the OSD Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD Have you adjusted the resolution or frequency on the monitor Is the frequency properly adjusted when checking the Display Timing on the menu Have the Windows colors been set properly Has the video card been set properly Have you installed the monitor driver See the video card manual to see if the Plug amp Play VESA DDC function can be supported MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play Have you changed your PC or video graphic card Did you install the program Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product Windows ME 2000 XP Set the colors properly at the Control Panel Display Settings Set the video card by referring to the video card manual Install the monitor driver according to the Driver Installation Instructions Install the monitor driver according to the Driver
56. nt system called PowerSaver This system saves energy by switching your monitor into a low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use a software utility installed on your computer to set up this feature Power off Normal Operation Power saving mode Power button OFF EPA ENERGY 2000 Power Indicator Blue Blue Blinking Black Less than 1 W Off Less than 1 W 120 Power Consumption Less than 42 W mode Vac 220 Vac This monitor is EPA ENERGY STAR compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality As an ENERGY STAR Partner SAMSUNG has determined that this ENERGY STAR product meets the ENERGY STAR guidelines for energy efficiency o Preset Timing Modes General PowerSaver Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Table 1 Preset Timing Modes Display Mode IBM 640 x 350 I
57. ome Edition Windows XP Professional Windows Vista SPSS SSSSSESSSSSSSSSSSS SS SSHSSHSESH SS SS SSCS NEE EE AETA TAKA EAT HAHAHAH pa It is recommended using MagicTune in Windows 2000 or ANEH Turar A later PEPE LOLOL ELL ere rere ere KALA LIK TETE ELENA KILI LAATA TINA AA Hardware 32 MB Memory above 60 MB Hard disk space above For more information visit the MagicTune website Uninstall The MagicTune program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MagicTune 1 Goto Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add or Remove Programs icon in Control Panel 3 Inthe Add or Remove Programs screen scroll down to find MagicTune Click on it to highlight it 4 Click the Change Remove button to remove the program Click Yes to begin the uninstall process 6 Wait until the Uninstall Complete dialog box appears g Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades The MagicTuneT program is an additional program for monitor products Some computing systems that install either an older or the latest video driver are not compatible with MagicTungT Please visit the Magicline Website for technical
58. p Telecommunications Research Institute ETRI This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images For more information refer to Help F1 in the software program Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD ROM Drive The initial Natural Color screen will appear Click on Natural Color in the startup window to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Windows Start button select Run Enter D color NCProsetup exe and then press the lt Enter gt key If the drive where the CD is inserted is not D enter the applicable drive Uninstalling the Natural Color Software Program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button SyncMaster 940NW The color and appearance of the product may vary depending on the model and the product specifica tions are subject to change without prior notice for reasons of performance enhancement E Adjusting Your Monitor Troubleshooting Specifications E Information Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual
59. requency Unit kHz Interlace and Non Interlace Methods Showing the horizontal lines of the screen from the top to the bottom in order is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs Plug amp Play This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically This monitor follows the international standard VESA DDC for the Plug amp Play function Resolution The number of horizontal and vertical dots used to compose the screen image is called resolution This number shows the accuracy of the display High resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1280 X 720 this means the screen is composed of 1280 horizontal dots horizontal resolution and 720 vertical lines vertical resolution Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal For Better Display 1 Adjust computer resolution and screen injection rate refresh rate oncomputer as described below to enjoy the best quality of picture You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT LCD o Resol
60. roduct HUH unplugged paaa ng e Otherwise this may cause heat emission from the accumulated dirt or GS degraded insulation causing electric shock or fire Do not place your children s favorite toys or any other objects of interest on AG an the product 2x nita im e Children may try to climb on the product to retrieve an object The product SY A could fall causing injury or even fatality Ng i 7 n s el t When lifting up or moving the monitor do not lift the monitor upside down NG while holding only the stand a e This may cause your monitor to fall and become damaged or cause personal g tad injury Good Postures When Using the Monitor Try to maintain a good posture when using the monitor e Keep your back straight e Keep a distance of about 45 50 cm between your eyes and the monitor screen Look at the screen from slightly above it and have the monitor directly in front of you e Tilt the monitor upwards by 10 20 degrees Adjust the monitor height so that the top of the monitor is slightly below eye level e Adjust the monitor angle so that there is no reflected light on the screen Try to maintain your arms perpendicular to your armpits e Keep your arms level with the back of your hands e Keep the angle of the elbow perpendicular e Keep the angle of the knees at more than 90 degree Do not let your feet fall up from the floor Adjust the arm position so that it is below the heart
61. rophet Ill Gaman a gt y Daks pasy 4 Click the Properties button on the Monitor tab and select Driver tab Plug and Play Monitor and 30 Prophet Ii Properties ma j 2 Geforce E Device Selection 2 Coto Comection General Adapter Maoraice Troubleshoot Color Manager hel gee Be Piore oa teres Soman merh naka ED Heats CJ Hide modai Iha this morda cannot diay Chain thie check boa sikot pou Ib keke dhagday Aedes Iha his magana ano di plage Don 60th This mag lead bo an anabe dipa Pligg and Pilay Monitor Proper lies SS General Daar Fhag are Pla ctor Dina Prosi Herriot Duine Data DOT Dupas ied gece 1 01 0 Digtal Seeger 4 bore echo PE Pedal To vers jaiai sinna Wee dhie len To iaia thee chee toe aa hee IP ihe dae Cale aber upahan he cineca moe kupa bo Ika piesa mababad giria LU rein nll Te weil es die bho eal Ok J Conca Plug and Mlay Monitor Pio per iire E Gemma Cah s3 Fhag aral Play Mondo Derce hpa Honilcas Miarad Sohee ubardard montor lipas Lagana or SD Piogeest Ill Device talian This dlawa ia manbre purgari li you ara harang picbiama palh Iha dinca ckek icubleshocs ta ele a hubiek Device urspr Lew iha damara jasha Welcome to the Hardware Update Wizard Tihia wansi hipa pau insted aoe bor Prag Ara Play Mordor iS 1f pour hardwace come milh an installation CO an Topp dak inani il now what do pou paari the varasid io do CO re
62. s located and click OK PR N kdna arih make pure Pa ha conei divea mibdled baira i a Pa ra a jia a iT aar Paa iii iral a ia Pl F yina EO Paraoa haieta Pa ee pres a a aal tie Ee Da T AA Hai Na a Pa biria Ng Mwa pb eet 9 Select the model that matches your monitor from the list of monitor models on the screen and click Next Sobers the divio diver you wart 1 inptall few this hardware a Pa Sarees ded See nar Paan eerie deed er cite baa Pa Sarre da Pa ea Ph eee ee eee hh a pih Hara Coe 10 Click Close Close gt OK OK on the following screens displayed in sequence Gan hat ductal updled yo bhe sana alamat bp Labang arang Sar na aa ha pha gao Ng sanang TE bide modes that ther manitor cannot daplay Samsung on NVIDIA GeForce 6600 LE Microsa montor canned display correctly The may lead to an unusabie FF This is my main mortor display arc jar damaged harcware E Extend the desktop onto the mortor 2 Microsoft Windows XP Operating System 1 Insert CD into the CD ROM driver 2 Click Start gt Control Panel then click the Appearance and Themes Icon F Come Pa Ba pE pes Measles Ti Hal a rebar rake gi Py ocum a rience Cagle Ee Piy Basak Cesena ha Kali Out hook Cpr a SS Pele Pla Eun m Sy cr TER ES Pye Pete p no kana Se iy Dope ew a i ate Foe Se or ere Dade teow Larapamgr ond Bryan eis 3 Display Pang ore Pag biorda coe IE P
63. s may differ depending on their specifications e Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions To mount the monitor on a wall you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface Contact the nearest Samsung Service Center for more information Samsung Electronics will not be responsible for damages caused by using a base other than those specified e Please use Wall Mount according to the International standards gt Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual 6 Installing the Monitor Driver Automatic ww When prompted by the operating system for the monitor driver insert the CD ROM included fen with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site
64. si ma eebe TS ee ee e a e gq4Q4Q Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue ICinanng Pia chek boa bi yaa So ad dag maa Fat Ha miiia cant apii crerecty Thee mang kana Ko an unua pilay ar lc daneg Pandang User Account Control helps sing unauthorized changes to your computer This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung con 6 Click Update Driver in the Driver tab GC EAT EE Beat Talaan ha gham piege tor a dave Epaia tera maa kapo ba tah Araw iter 7 Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer Ce nirun onc PP Mi Ea Hame koe AU AAE CP a ee kae Search wtematically kot opdaded drier pitani Wigan ae pee Bee pees eel ae eed Foe Be Li fe oe fe pe ee Li Py Fi el ed ee ey db bet ome pet bom a ligt of Gere Scheer om My computer lba inl al an aa a Pa cai a er alar r ail al ree eee r bhr aaa ad daa 8 Click Have Disk and select the folder for example D Drive where the driver setup file i
65. siderations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings In most cases monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness e For example the number of TFT LCD sub pixels that is contained in this product are 3 888 000 Note Design and specifications are subject to change without prior notice Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment General PowerSaver Preset Timing Modes PowerSaver This monitor has a built in power manageme
66. stallation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown below e Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button Connecting the Monitor Using the Stand Installing the be jp Na Installing the Monitor Driver Natural Color w a SAMSUNG monitor installer Select the display adapter on which you wari io imal the maning 1 RADEON 9550 Plug and Fim blondie Sle the moadonshich you yaan bo ingtali Hardware Installation The software pou ane mabaling for this arcane Samsung sasa has not passed Windows Logo besing to wenly its compahbdib with Windows XP Tell me why this besting is important Continuing your installation of this software may impair or destabilize the comecl operation of your system either immediately or in the future Microzoll strongly recommends Ihat pou top this installation now and contact the hardware vendor for software that has passed Windows Logo testing Contin Arney 570P raii http www samsung com 5 Monitor driver installation is completed 6 Inst
67. th a computer equipped with VESA DPMS functionality As an ENERGY STAR Partner SAMSUNG has determined that this ENERGY STAR product meets the ENERGY STAR guidelines for energy efficiency General PowerSaver Preset Timing Modes Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows Table 1 Preset Timing Modes Horizontal Vertical Display Mode Frequency Frequency BEANE ae SHINE EGG kHz Hz Ua 4 H V IBM 640 x 350 IBM 640 x 480 IBM 720 x 400 MAC 640 x 480 MAC 832 x 624 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA 1280 x 720 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called Vertical Frequency or Refresh Rate Unit Hz E Safety Instructions SyncMaster 940NW
68. time e Failure to do so may cause electric shock or fire Do not try to move the monitor by pulling only the wire or the signal cable e This may cause a breakdown electric shock or fire due to damage to the cable Do not move the monitor right or left by pulling only the wire or the signal cable e This may cause a breakdown electric shock or fire due to damage to the cable Do not cover the vents on the monitor cabinet e Bad ventilation may cause a breakdown or fire Do not place water containers chemical products or small metal objects on the monitor e This may cause a malfunction electric shock or fire e f a foreign substance enters the monitor unplug the power cord and contact the Service Center Keep the product away from combustible chemical sprays or inflammable substances e This may cause an explosion or fire Never insert anything metallic into the monitor openings e This may cause electric shock fire or injury Do not insert metal objects such as chopsticks wire and tools or inflammable objects such as paper or matches into the vent headphone port or AV ports or etc e This may cause electric shock or fire If an alien substances or water enters the product turn the product off unplug the power connector from the wall outlet and contact the Service Center When viewing a fixed screen for an extended period of time residual image or blurriness may appear e Cha
69. tire NT in analog mode only Q Q MENU gt a gt H gt a T gt H gt MENU Changes the vertical position of the monitor s entire display Available in analog mode only Q Q MENU gt a gt H gt t gt gt gt MENU Language H Position V Position Transparency Display Time O Setup M You can choose one of 9 languages English Deutsch Espa ol Fran ais Italiano Svenska PYCCKHH Portugu s T rk e Note The language chosen affects only the language of F Q the OSD It has no effect on any software running on the computer MENU gt a gt gt sg gt MENU You can change the horizontal position where the OSD menu appears on your monitor Q Q MENU gt a gt H gt T gt H gt gt MENU You can change the vertical position where the OSD menu appears on your monitor Q Q MENU gt a gt H gt T gt E gt gt MENU Change the transparency of the background of the OSD ee MENU gt a gt H gt a T gt H gt gt MENU The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it 6 Q is turned off MENU gt a gt H gt T gt H gt MENU Image parameters are replaced with the factory default Image Reset values Q Q MENU gt gt H
70. to open the on screen menu and exit from the menu screen or close screen adjustment menu a This button allows you to adjust items in the menu Press this button to activate a highlighted menu item AUTO Press to self adjust to the incoming PC signal The values of fine coarse and position are adjusted automatically User Control Buttons Direct Functions OSD Functions reg MagicTune AUTO un MEHU T eee When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Auto adjustment allows the monitor to self adjust to the incoming video signal The values of fine coarse and position are adjusted automatically Available in analog mode only To make the automatic adjustment function sharper execute the AUTO function while the AUTO PATTERN is on If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy If you change resolution in the control panel auto function will be executed automatically O Locked a aaa a After pushing the MENU button more than 5 seconds OSD function is locked unlocked CO You can adjust only the brightness and contrast of the monitor with the OSD adjustment locking feature Locked O MagicBright foo MEHU Mon Description Push the MagicBright button to circle through available preconfigured asea MagicBright modes Six different
71. ues may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu 2 Text For documentations or works involving heavy text 3 Internet For working with a mixture of images such as text and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD gt gt Click here to see an animation clip Brightness button When OSD is not on the screen push the button to adjust CS brightness Adjust buttons w a Adjust items in the menu OOOH Enter button Activates a highlighted menu item AUTO button Use this button for auto adjustment Power button Use this button for turning the monitor on and off Power indicator This light glows blue during normal operation and blinks blue once as the monitor saves your adjustments CV See PowerSaver described in the manual for further information regarding power saving Had functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Unpacking Front Rear Rear Simple stand The configuration at the back of the monitor may vary from product to product KO POWER port Connect the power cord for your monitor to the power port on the back of the monitor a RGB IN port Connect the signal cable to the 15 p
72. ution 1280 X 720 o Vertical frequency refresh rate 60 Hz 2 TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness o For example the number of TFT LCD sub pixels that is contained in this product are 2 764 800 3 When you clean the monitor and the panel outside please apply the recommended small amount of cleaner by using soft and dry cloth and polish it Let LCD area not to be forced but to be scrubbed out softly If excessive force is applied you can have a stain on it 4 lf you are not satisfied with the quality of the picture you can get better quality of the picture by executing auto adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after automatic adjustment use FINE COARSE adjustment function 5 If you view a fixed screen for an extended period of time residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time Contact SAMSUNG WORLDWIDE Terms For Better Display Authority Correct Disposal Authority Information in this document is subject to chang
73. ving Windows ME XP 2000 Set the function at BIOS SETUP of the function computer or the screen saver Refer to Windows Computer Manual How can I clean the outer Disconnect the power cord and then clean the monitor with a soft case LCD Panel cloth using either a cleaning solution or plain water Do not leave any remains of the detergent nor scratch the case Do not allow any water to go inside the monitor Check List Q amp A Self Test Feature Check Self Test Feature Check Self Test Feature Check Warning Messages Environment Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly Warning Messages If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power in
74. ype 1 FLGHT TIME a gt Best 20 30 UA102 21 10 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference in luminance Black amp White Grey Ex SYSTEM 245 e Recommended settings Bright colors with little difference in luminance Change the characters color and background color every 30 minutes Ex SYSTEM 245 SYSTEM 245 STATUS OK STATUS OK Every 30 minutes change the characters with movement PAPAW WWE IF WAP KA1710 12 00 KA1710 12 00 Hara FA 77 14 15 UA0110 13 30 LLANTIN 12 20 AA0002 14 00 FA7777 14 15 2 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC ina pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased
75. ype base wall mount hanger or other base a a i A e Do not use screws longer than the standard dimension as they may damage the inside of the Monitor e For wall mounts that do not comply with VESA standard screw specifications the length of the screws may differ depending on their specifications e Do not use screws that do not comply with the VESA standard screw specifications Do not fasten the screws too tightly as this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions e To mount the monitor on a wall you should purchase the wall mounting kit that allows you to A mount the monitor at least 10cm away from the wall surface e Contact the nearest Samsung Service Center for more information Samsung Electronics will not be responsible for damages caused by using a base other than those specified e Please use Wall Mount according to the International standards Connecting the Monitor Using the Stand Installing the Monitor Driver Installing the Monitor Driver Natural Color Automatic Manual o Installing the Monitor Driver Automatic x When prompted by the operating system for the monitor driver insert the CD ROM included Pa with this monitor Driver in

Download Pdf Manuals

Related Search

Related Contents

Projet de réglement  KENMERKEN INSTALLATlE GEBRUIKSAANWIJZING  DeVillbiss Air Power Company D26368 User's Manual  Powermate PMC525502 Parts list  D714GIY取扱説明書  

Copyright © All rights reserved. Failed to retrieve file