Siig 3-Port DVI
Contents
1. not enabled DIP Switch e 1 ON open EQ Less noise but more power consumption e 1 OFF Close EQ e 2 ON Writing Default EDID Set switch to ON plug in the power adapter The green light will turn on after the writing process in completed e 2OFF Recording EDID of the Connected Display via DVI Out1 connector Plug inthe DVI cable first from the display and then plug in the power adapter The recording process will be initated and the green LED lights up The green LED will turn off after the reading process is completed Important Do not plug in your DVI source when the 3 Port DVI Splitter is writing default EDID or recording EDID from displays This will cause damage to the EDID in the flash memory Note If you cannot boot your computer from the connected 3 Port DVI Spitter due to damaged EDID in the splitter proceed with Writing Default EDID and Recording EDID of the Connected Display as outlined above This will force the 3 Port DVI Splitter to write the EDID from the display Hardware Installation We suggest to connect the monitor with the lowest resolution to DVI OUT 1 Unless you would like to use the default universal EDID please set DIP switch 2 at OFF position which allows the 3 Port DVI Splitter to read the first connected monitor s EDID Single Splitter 1 Connect a monitor projector or other displays with DVI inputs to DVI Out 1 of the 3 Port DVI Splitter Plug the DVI Y cable into the DVI Out2. AA 3 Port DVI Splitter U Quick Installation Guide Introducing the 3 Port DVI Splitter The 3 Port DVI Splitter provides an easy solution for distributing one DVI video signal to three displays Features and Benefits Connects a DVI video source to 3 DVI compatible displays Perfect as a repeater by regenerating the DVI signal Stackable up to 8 devices to support up to 17 outputs Reads and remembers EDID of displays Technical Specifications Input connector 1 x DVI I Output connector 2 x DVI I Maximum resolution 1600 x 1200 LEDs 1 x Green ID 1 x Red power DIP switch 2 Dimensions 12mm L x 88mm W x 25mm H Weight 300g Package Contents 3 Port DVI Splitter DVI Y cable DVI to DVI x2 100 180 cm Power Adapter 5V 2A Quick Installation Guide 04 0493A 1 Front Panel aaa 53 CODO D DVI OUT1 DVI OUT2 Connect to DVI Display Connect to DVI Y cable Note When cascading use the short cable of the DVI Y cable to connect to the next splitter s DVI IN Rear Panel Power Jack Connect to DVI Rotary Green Red Infrared output PC switch LED LED receiver e _ Power Jack connect to the power supply e DVI In connect to DVI output source such as PC e Rotaryswitch used when cascading assign different ID for each switch Ignore when only a single splitter is used e Green LED lights when the splitter is selected e Red LED lights when powered on e Infrared Receiver optional
3. 2 of the 3 Port DVI Splitter Connect the second and third displays to the DVI female connectors of the DVI Y cable Plug the power adapter into the Power Jack then plug the adapter into a reliable power outlet Connect a PC or other device with DVI output to the DVI In of the 3 Port DVI Splitter Multiple Splitters Cascading 1 Connect a monitor projector or other displays with DVI inputs to DVI Out 1 of the 3 Port DVI Splitter Plug the DVI Y cable into the DVI Out 2 of the 3 Port DVI Splitter Connect the second display to the long cable of the DVI Y cable female connector and plug the short cable to the DVI In of the second 3 Port DVI Splitter Connect the third display to the DVI Out 1 of the second 3 Port DVI Splitter Repeat steps 2 4 for the remaining cascaded splitters 6 For each splitter plug the power adapter into the Power Jack then plug the power adapter into a reliable power outlet 7 ConnectaPC or other device with DVI output to the DVI In of the first 3 Port DVI Splitter Safety Precautions Like all electronic equipment the 3 Port DVI Splitter should be used with care Please read and follow the safety precautions to protect yourself from possible injury and minimize the risk of damage to the unit e Follow all instructions and warnings marked on the unit e Provide proper ventilation and air circulation do not use near water e Do not attempt to service the unit yourself except where explaine
4. d in the manual e Keep objects that might damage the device at a safe distance and assure that the placement of this unit is on a Stable surface e Do not use liquid or aerosol cleaners to clean this unit and always unplug the power to the device before cleaning e Use only the power adapter and accessories that came with the unit Blank Page Technical Support and Warranty QUESTIONS SIIG s Online Support has answers Simply visit our web site at www siig com and click Support Our online support database is updated daily with new drivers and solutions Answers to your questions could bejust a few clicks away You canalso submit questions online and a technical support analysts will promptly respond SIIG offers a 2 year manufacturer warranty with this product Please see our web site for more warranty details If you encounter any problems with this product please follow the procedures below A If it is within the store s return policy period please return the product to the store where you purchased from B If your purchase has passed the store s return policy period please follow these steps to have the product repaired or replaced Step 1 Submit your RMA request Go to www siig com click Support then RMA to submit a request to SIG RMA If the product is determined to be defective an RMA number will be issued Step 2 After obtaining an RMA number ship the product e Properly pack the product for shipping All so
5. erce sites PRODUCT NAME 3 Port DVI Splitter FCC RULES TESTED TO COMPLY WITH FCC PART 15 CLASS B OPERATING ENVIRONMENT FOR HOME OR OFFICE USE FCC COMPLIANCESTATEMENT This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SHUG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA Ph 510 657 8688 3 Port DVISplitteris a trademark of SHG Inc SIIG and the SIIG logoare registered trademarks of SUG Inc Other names used in this publication are for identification only and may be trademarks of their respective companies August 2008 Copyright 2008 by SIIG Inc All rights reserved
6. ftware cable s and any other accessories that came with the original package mustbe included e Clearly write your RMA number on the top of the returned package SIIG will refuse to accept any shipping package and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton e Youare responsible for the cost of shipping Ship the product to the following address SIIG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA RMA e SIIG will ship the repaired or replaced product via Ground in the U S and International Economy outside of the U S at no cost to the customer About SIIG Inc Founded in 1985 SIIG Inc isaleading computer upgrade manufacturer of I O connectivity products including PCIe PCI amp ISA serial and parallel ports USB Serial ATA amp UltraATA controllers FireWire 1394a b networking sound cards and other accessories SIIG is the premier one stop source of upgrades SIIG products offer comprehensive user manuals many user friendly features and are backed by an extensive manufacturer warranty High quality control standards are evident by the overall ease of installation and compatibility of our products as well as one of the lowest defective return rates in the industry SIIG products can be found in computer retail stores mail order catalogs through major distributors system integrators and VARs in the Americas and the UK and throughe comm
Download Pdf Manuals
Related Search