Home

Philips 37PFL7605H 37" Full HD Silver

1. TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock 1 When watching TV press Bt 2 Select Status then press OK The clock displays on the lower right hand corner of the TV screen EN 42 Change the clock mode By default the clock mode is set to Automatic syncing the TV clock to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions set the dock mode to Manual Country dependent applies UTC and gives you the option of setting Daylight saving 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Clock gt Auto clock mode 3 Select Automatic Manual or Country dependent then press OK Enable or disable daylight saving If clock mode is set to Country dependent enable or disable daylight saving if required for your time zone 1 In the Clock menu select Daylight saving gt Daylight saving time or Standard time then press OK Daylight saving is enabled or disabled for your time zone Set the clock manually If clock mode is set to Manual set the date and time manually 1 In the Clock menu select Date or Time then press OK 2 Use the Navigation buttons to make your selection then select Done TV location A range of TV settings are applied to suit the location of the TV Sho
2. 11 6 kg 15 kg 16 kg COART 9 5 kg 12 kg 13 kg 0738 kg EN 69 English 8 Index A age rating 29 Ambilight 12 Ambilight settings 21 Ambilight response speed 21 Ambilight switch on 21 audio language 37 audio lip sync 42 B bottom connectors 47 C CAM enable 62 CAM insert 61 care 9 channel list 17 channels favorites 28 channels hide or unhide 35 channels install manual 36 channels rename 35 channels reorder 35 channels update 35 child lock age rating 29 child lock overview 29 dock 42 common interface 61 connect device 45 connect antenna 45 connect channel decoder 57 connect PC 57 connect PC network 38 connect power 45 connect USB 30 connectors bottom 47 EN 70 connectors rear 47 connectors side 48 controls side 14 D decoder 57 default settings 34 demo 34 devices add 20 devices watch 20 digital channels subtitles 29 digital radio 31 dimensions 68 display resolution 66 E EasyLink buttons 59 EasyLink enable 58 EasyLink features 58 EasyLink RC key forward 59 EasyLink TV speakers 60 end of use 10 environment efforts 10 EPG enable 28 EPG menu 28 EPG overview 28 F factory settings 34 favorites list add 28 favorites list select 28 G green eco overvi
3. 2 Select Help then press OK On screen Help is displayed 3 Select Technical data gt Dimensions Navigate to the last page of this section and note the version number Note The version number is a 12 digit number where the last digit indicates the version of Help installed in your TV For example if the version in the TV is 3139 137 03583 3 represents the version of Help currently installed EN 43 English 1 Insert the empty USB flash drive into a USB connector on your PC 2 On your PC create a folder named upgrades in the root directory of the USB flash drive 3 In your web browser navigate to www philips com support 4 At the Philips Support site find your product and locate the Help file for your TV The Help file a upg file is compressed nto a zip archive 5 If the Help file at the Philips Support site is a later version than the file in your TV click it to save the file to the USB flash drive 6 Using the archive utility extract the zip file to the upgrades folder in the USB flash drive 7 The upg Help file is extracted 8 Disconnect the USB flash drive from the PC e Do not switch off the TV or remove the USB flash drive during the update e fa power failure occurs during the update do not remove the USB flash drive from the TV The TV will continue the update as soon as power is restored e If an error occurs during the update retry the pr
4. Notes e If the reception is poor reposition your antenna and repeat the procedure e f you receive the channel with DVB C he options Symbol rate mode and Symbol rate are available n Symbol rate mode select Automatic unless your cable provider supplies you with a specific symbol rate value Fine tune analog channels If the reception of an analog TV channel is poor try fine tuning the TV channel Note If you are prompted to enter a code enter 8888 1 Press fft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual installation 7 Fine tune and then press OK 3 Press dk or W to fine tune the channel 4 When the correct channel frequency is selected select Done and then press OK 5 Select Store current channel to store the fine tuned channel under the current channel or select Store as new channel to store under a new channel number Change language settings Audio subtitle teletext languages Digital TV channels may stream several audio subtitle and teletext languages with a broadcast Set preferred languages when multiple languages are available 1 Press fft 2 Select Setup gt Channel settings or Satellite settings Language 3 Select one of the following settings then press OK e Primary audio Secondary audio Selects the available audio language for digital channels e Primary subtitles Secondary subtitle
5. TV settings gt Ambilight gt Colour gt Dynamic Set the speed which Ambilight responds to on screen images 1 Press NI Experience 2 Select Ambilight dynamic then press OK 3 Move the slider to set Ambilight responsiveness 4 Press D to exit the slider 5 Press OK to confirm your choice Use lounge light When the TV is on standby you can switch on Ambilight and create a lounge light effect in your room During TV standby press P on the side of the TV Note It may take more than 5 seconds for the lounge light to switch on EN 21 English To select another lounge light colour see Use your TV gt Use Ambilight gt Setup Ambilight Page 21 Enjoy Net TV What is Net TV Koninklijke Philips Electronics N V bears no responsibility for content provided by Net TV service providers Net TV offers Internet services and websites tailored for your TV You can visit popular sites view infotainment rent a movie from a video store or watch a TV show you have missed Net TV pages The most popular websites in your country have tailored their web pages for use on TV Read the newspaper headlines watch the atest video hit or check the weather forecast Net TV programme guide Once you are connected to Net TV the TV programme guide uses the Internet to gather its information Missed a program f a broadcaster offers this service you can catch up with a favorite program
6. Updates the latest program information Use timers and locks Overview The Electronic Program Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programs being broadcast e _ View upcoming programs e Group programs by genre EN 28 Sleeptimer Sleeptimer switches the TV to standby after a pre defined period of time You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Sleeptimer 3 Press the Navigation buttons to set the sleeptimer The sleeptimer can be set up to 180 minutes in steps of five minutes The sleeptimer is switched off if it is set to zero minutes 4 Press OK to activate the sleeptimer The TV switches to standby after the set period of time For information on child lock codes see Use more of your TV gt Use timers and locks gt Child lock Page 29 Use subtitles Child lock To prevent children from watching TV you can lock the TV or block age rated programmes Set or change the child lock code 1 Press fft 2 Select Setup gt Channel settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select
7. Channel lock 2 Enter the child lock code with the Numeric buttons The Channel lock menu appears 3 Select channels to lock or unlock On analog channels 1 Switch the TV to an analog TV channel 2 Press LLI then select Text and press OK 3 Enter the three number page number of the subtitles page usually 888 4 Press 2 to exit teletext Subtitles display if available Parental rating Some digital broadcasters rate their programs according to age You can set your TV to display only programs with age ratings lower than your child s age 1 Press fft 2 Select Setup gt Channel settings or Satellite settings gt Child lock gt Parental rating A message appears prompting you to enter the child lock code 3 Enter the child lock code with the Numeric buttons 4 Select an age rating then press OK All programs beyond the selected age rating are blocked On digital channels Not supported on MHEG channels 1 Press EJ 2 In the menu that appears select Off On or On during mute then press OK Note With On during mute the TV displays subtitles only when the sound is muted with t PHILIPS TELEVISION Subtitle language This feature is only supported on selected digital channels 1 While watching TV press Pt 2 Select Subtitle language 3 Select a subtitle language from the list then press OK Note More information about language s
8. broadcaster this TV allows special audio and subtitles for the hearing impaired as well as special audio for the visually impaired To enable these features you must turn on universal access in the Preferences menu 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Universal access gt On then press OK Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing impaired To switch on hearing impaired audio and subtitles if available 1 While watching TV press Pt 2 Press the red button to select Hearing impaired 3 Press the green button to switch on hearing impaired audio and subtitles press the red button to switch it off 4 Press 2 to exit Tip To verify whether a hearing impaired audio language is available press and select Audio language Languages with an ear icon indicate hearing impaired support Visually impaired Some digital TV channels broadcast special audio adapted for people who are visually impaired The normal audio is mixed with extra commentary To switch on visually impaired audio if available 1 While watching TV press 2 Press the green button to select Visually impaired 3 Use the following buttons to select e Red Off Tum off visually impaired audio EN 32 e Yellow Headphones Hear visually impaired audio from headphones only e Green
9. 3 Component Y Pb Pr Audio L R eadphones Stereo 3 5mm mini jack e SERV U Service port etwork Ethernet Bottom e EXT 1 SCART RGB CVBS DMI 1 ARC HDMI Audio Return Channel DMI 2 3 HDMI e DIGITAL AUDIO OUT Coaxial e AUDIO IN DVI VGA stereo 3 5mm mini jack e Antenna 75 ohm coaxial e VGA PC input Side e HDMI e USB e SD card e Common Interface Cl EN 67 PEG mp2 mp3 mpg mpeg vob English Dimensions Note Dimensions and weights are approximate values only Design and specifications are subject to change without notice The legends used to indicate the TV dimensions are as follows 81 cm 32 inch TV 94 cm 37 inch TV 102 cm 40 inch TV 117 cm 46 inch TV Make a note of the legend that corresponds to your TV Then navigate to the next page to view the dimensions Use your TV legend to note the dimensions of your TV with and without the stand 777 1 898 966 1103 mm 472 554 593 669 C12 rpo 209 Ops Use your TV legend to note the thickness of your TV with and without the stand 42 42 41 5 424 mm 221 242 242 265 EN 68 Use your TV legend to note the weight of the TV with stand Use your TV legend to note the weight of the TV without the stand UMv 3139 137 03595 20110415
10. Duo 2 1GHz e 1GB RAM e 200MB free hard disk space e WiFi 802 11n nternet connection Network settings The TV s network settings that are used to connect to your router are standard and set to automatic This ensures easy connection with any available network If you have problems with the network connection you might want to adjust the settings so that they are appropriate for your home network If you are unsure ask someone with knowledge of network settings to help you To set specific network settings press ft gt Setup gt Network settings and press OK For more information on PC media server settings Page 40 access the PDF version of this user manual on the internet at www philips com support PC media server settings Enable media sharing n Microsoft Windows start TVersity Click he Settings tab and click the Start Sharing Dutton 4s A pop up window tells you that the media server service is started Click OK Set folders for media sharing In T Versity click the Sharing tab EN 40 Click the green plus icon and select Add folder In the Add media pop up window click Browse button n the Browse for Folder window select a folder with music photos or videos which you you want to share and click OK Enable media sharing n Mac OS X start Twonky Media T wonky edia appears n the Basic Setup box click Clients Security Clie
11. Enable or disable HDMI ARC Note Enabling HDMI ARC automatically adds the device to the home menu 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt HDMI 1 ARC gt On or Off 3 Press OK to activate Use a CAM Insert and activate a CAM Caution Be sure to follow the instructions described below Wrong insertion of a Conditional Access Module CAM may damage both the CAM and your TV Notes e his TV supports Cl as well as CI CI allows service providers to offer premium HD digital programs with a high level of copy protection 61 e Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Follow the directions printed on the CAM and insert the CAM into the Common Interface at the side of the TV 3 Push the CAM in as far as it will go and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use as digital services will be deactivated English Access CAM services 1 After inserting and activating the CAM press Bt 2 Select Common interface then press OK 3 Select the CAM provider and press OK Watching a CAM service If a CAM is inserted and subscription fees are paid the TV shows the programme from the digital TV service provider The applications functions the content and the onscreen messages vary per
12. HDMI Digital audio and video input from high definition digital devices such as Blu ray players Connect devices Blu ray disc player Use an HDMI cable to connect the Blu ray disc player to an HDMI connector on the bottom of the TV b n Blu ray Disc Player CL 39oececooc EN 48 DVD player Use an HDMI cable to connect the DVD player to an HDMI connector on the bottom of the TV b vn DVD Recorder First use two antenna cables to connect the antenna to the DVD recorder and the TV Finally use a SCART cable to connect the DVD Recorder to a SCART connector on the bottom of the TV DVD Recorder ee ne EN 49 English Home Theatre System First use an HDMI cable to connect the device to the TV HDMI DVD Home Theatre System Then use a digital audio cinch cable to connect the device to the TV ee Digital Audio TV A EX Digital Audio n Syste DVD Hone hea afp Digital Audio In Audio and video synchronization sync If the sound does not match with the video on screen you can set a delay on most DVD Home Theatre Systems to match the sound and video EasyLink To automatically mute the TV speakers when content is played from your Home Theatre System enable EasyLink For more information see Connect the TV gt Use Philips EasyLink gt Configure TV speakers Page 60 EN 50 Dig receiver satellite First use two antenna cables to
13. TV if needed EN 54 Enable game mode To prevent picture delay set the TV to Game mode 1 Press NL 2 Select Smart picture gt Game then press OK 3 Press 2 to exit The most practical connections for a game console are at the side of the TV S amp S HDMI Game console If you cannot use the side connector use an H connect the game console to the back of the 1 DMI or the EXT2 YPbPr and Audio L R cable to V On certain models EXT2 is labelled EXT3 mug gu YPbPr G08 eg m 8 o Audio L R EN 55 English Dig camera To view pictures on your digital camera connect it to the USB connector at the side of the TV Switch on the digital camera If the content of your camera does not appear automatically you may need to enable Picture Transfer Protocol PTP on the camera Refer to the camera s user manual for instructions Dig camcorder The most practical connection for a camcorder is at the side of the TV Otherwise use an HDMI or the component video and audio cable YPbPr and Audio L R to connect the camcorder to the back of the TV Ade re ET verra TETTE Auto UR EN 56 Channel decoder Before using a SCART digital channel 3 Set the channel you want to decode decoder select the channel to decode and 4 Select Status then the location of the assign the decoder to the SCART connector decoder 1 Press fft 5 Press OK 2 Select Setup
14. These numbers are printed on the back of the TV and on the packaging Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e _ Check that the power cable is securely connected e _ Check that the power switch at the bottom back of the TV is switched on The TV does not respond to remote control or side controls when switched on The TV requires some time to start up During this time the TV will not respond to he remote control or side controls This is normal behavior The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the child lock feature Enter 8888 The TV menu is in the wrong language Change the TV menu to your preferred language For more information see Set up the TV gt Change language settings gt Menu language see Menu language on page 38 When turning the TV on off to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is normal expansion and contraction of the TV as it cools and warms up This does not impact performance When the
15. USB FAT or DOS formatted Mass Storage Class compliant only SD card slot Ethernet UTP5 Supported image files JPEG jpg Supported audio video files AV wo lt e U a pag E U lt a a Q U U O x eo avi ideo MPEG 4 SP MPEG 4 ASP io MPEG Layer 2 3 AC3 EG mpg mpeg vob EG 1 MPEG 2 EG mp2 mp3 mpg mpeg vob io MPEG 1 Layer 2 MPEG 1 Layer 3 AC3 EG 4 mp4 PEG 4 AVC H 264 L2 CIF L4 HD 5 Zn aud io AAC LC HE AAC V wmv eo WMV9 VC1 A wma io WMA v2 to v9 2 MKV mkv video H 264 aud io HE AAC AC3 Multimedia file names must not exceed 128 characters Supported DLNA compliant media server software Windows Media Player for Microsoft Windows Twonky Media for Microsoft Windows and Mac OS X Sony Vaio Media Server for Microsoft Windows TVersity for Microsoft Windows Nero MediaHome DixiM for Microsoft Windows XP Macrovision Network Media Server for Microsoft Windows Fuppes for Linux uShare for Linux Supported DLNA audio video files WMV wmv video WMV9 VC1 audio MPEG 1 Layer 2 MPEG 1 Layer 3 LPCM AC3 PEG 4 mp4 video MPEG 4 AVC H 264 L2 CIF PEG 4 AVC H 264 L4 HD audio AAC LC HE AAC V mkv video H 264 audio HE ACC AC3 Connectivity Rear e EXT 2 SCART RGB CVBS e EXT
16. Update software then press OK The update assistant starts Follow the on screen instructions to complete the update Note If you already have the upgrade file downloaded onto a USB flash drive connect it to the TV Then select Setup gt Software settings gt Local updates If the TV is connected to a router which is connected to the Internet you can update the TV software directly from the Internet You need a high speed Internet connection 1 Press fft gt Setup gt Update now and press OK 2 Select Internet and press OK Follow the instructions on screen When the update is done the TV switches off and back on again automatically Wait for the TV to switch back on do not use the Power switch on the TV If the TV is connected to the Internet the TV displays a message about the availability of new software at start up On screen Help Before updating the on screen Help ensure you have the following e Anempty USB flash drive The USB flash drive must be FAT or DOS formatted e Do not use a USB hard drive e APC with Internet access e An archive utility that supports the ZIP file format for example WinZip for icrosoft Windows or Stufflt for acintosh Before updating Help check the current version installed on your TV If the version of Help on your TV is lower than the version available at www philips com support download and install the latest Help file 1 Press fft
17. are removed from the channel list If a channel update is performed a message appears at startup If you do not want this message to appear 1 Press fft 2 Select Setup gt Channel settings gt Channel installation gt Channel update message gt Off then press OK e To disable automatic updates In the Channel installation menu select Automatic channel update gt off Manual update Update channels yourself at any time using the manual update 1 In the Channel installation menu select Automatic installation then press OK 2 Start the update and select Update channels The update may take a few minutes EN 35 English Other options Select audio language If the TV channel has multiple or dual sound broadcast you can select the preferred audio language 1 While watching TV press Bt e Audio language Select the audio language for digital channels e Dual I II Select the audio language for analog channels Select video stream for DVBS channel only If available you can view different video stream of the channel depending on broadcast service provider 1 While watching TV press Pt 2 Select Video selection to view the various selection Install channels Automatic install When the TV was switched on for the first time a full installation of channels was performed You can redo this full installation again to set your language country and ins
18. connect the antenna to the receiver and the TV c Antenna Digital receiver I Satellite receiver Digital receiver Satellite receiver Dig receiver and DVD R First use three antenna cables to connect the digital receiver and the DVD Recorder to the TV TT N z Antenna Antenna ik Qc EN 51 English Then use a SCART cable to connect the digital receiver to the TV ee Scart Digital receiver I recei iver Finally use two SCART cables to connect the two devices and the TV Dig receiver DVD R and HTS First use three antenna cables to connect the two devices and the TV Cc o iB ANTON EN 52 Then use a two SCART cables to connect the digital receiver to the DVD Recorder and the DVD Recorder to the TV ey Scart Digital TV receiver DVD Recorder gl Ee pe LS put gt 000 Then use an HDMI cable to connect the Home Theatre System to the TV Ui DVD Home Theatre System C3oeceeooc Finally use a digital audio cinch cable to connect the Home Theatre System to the TV S Digital Audio LE DVD Home Theatre System ET EN 53 English Dig HD receiver First use two antenna cables to connect the Digital HD receiver to the TV e Antenna Digital HD receiver Connect more devices Game console The most practical connections for a game console are at the side of the TV However more connectors are available at the back of the
19. gt Channel settings gt Decoder gt Channel PC Connect a computer using one of the following cables HDMI cable DVI HDMI cable EN 57 English HDMI cable and HDMI DVI adaptor AUDIO IN DVI VGA HDMI dil VGA cable AUDIO IN DVI VGA VGA D Use Philips EasyLink Enable or disable EasyLink Philips EasyLink provides several features that enable you to control devices that are connected via HDMI Connected devices must support the HDMI CEC standard and must be properly configured for EasyLink to work Note HDMI CEC functionality is known by other names on other brands Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink To enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it EN 58 AQ p DVI C DNI VGA C 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt On or Off then press OK EasyLink features With Philips EasyLink enabled the following features are available One touch play When you play content from a HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you connect your TV to a HDMI CEC compliant device pressing on the TV remote control switches the TV and all connected HDMI devices to standby mode Syst
20. in all countries Switch on EPG 1 Press LLL 2 Select Programme guide then press OK Add or remove channels 1 Press LL 2 Select Channel list then press OK 3 Press Bt 4 Select Mark as favourite or Unmark as favourite then press OK A star appears in the channel grid indicating that the channel is added to the favorite list The star disappears if you remove the channel from the favorite list Select a favorite list View only channels in a favorite list or view all channels if a favorite list is currently selected 1 In the channel list press Ef 2 Select Select list gt Favourites to display channels in a favorite list or All to display all channels 3 Press OK to confirm your choice Use EPG EPG options Use the EPG options menu to set or clear reminders change day and access other useful EPG options Depending on the broadcast service these options are available only for seven or eight days 1 When in EPG press 2 Press the Navigation buttons and OK to select and adjust one of the following settings e Setreminder Sets program reminders e _ Clear reminder Clears program reminders Change day Sets the EPG day Select Today Next day or Previous day More info Views program information e Search by genre Searches TV programs by genre e Scheduled reminders Lists programs reminders Update Programme guide
21. is poor picture quality from connected devices e Check that the devices are connected properly e _ Check that the picture settings are correctly set The TV did not save your picture settings Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need to use a Conditional Access odule to access content Check with your operator An e sticker banner displaying information appears on the TV display The TV is in Shop mode Remove the e sticker by setting the TV to Home mode then restarting the TV See Setup the TV gt Change other settings gt TV location Page 42 for more information EN 64 The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate e Setthe TV picture format to unscaled Sound issues There is picture but no sound from the TV If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to 0 e Checkthat the soun
22. of Ambilight 1 Press NI Experience 2 Select Ambilight then press OK 3 To switch on or off Ambilight select On or Off You can also press B on the TV to switch Ambilight on or off e Colour Selects a predefined color e Custom colour Set your own Ambilight colour To access this option set Ambilight gt Colour gt Custom e Separation Adjusts the difference in color levels between each side of the TV Turn off this feature for a dynamic and uniform Ambilight color e TV switch off Selects how Ambilight switches off when the TV is switched off e Lounge light mood Selects a lounge light mode This setting is applied when lounge light is enabled in standby mode e Scenea lounge light Switch on or off Scenea lounge light when Scenea is enabled e Wall colour Selects a color to match the wall color Ambilight will correct its colours to mix best with the colour of the wall behind the TV Setup Ambilight In the Ambilight menu you can access more Ambilight settings While watching TV press ft gt Setup gt TV settings gt Ambilight Select a setting to adjust e Dynamic Adjusts Ambilight between relaxed and dynamic levels Available only if Ambilight Colour is set to Dynamic e Brightness Adjusts the brightness of Ambilight Set Ambilight response Before you can adjust the speed of Ambilight response press ft gt Setup gt
23. picture Frequently used picture settings e _ Smart sound Frequently used sound settings e _ Speakers Configure TV speakers for Philips EasyLink e Picture shift Adjusts the position of the picture Add your devices After you connect a device to the TV add this device in the home menu for easy access In the home menu select Add your devices then press OK Follow the instructions on screen to add the device to the home menu To remove a device from the home menu select the item press and select Remove this device Press OK Setup Setup in the home menu allows you to change most of the TV settings including e Picture or sound settings e Installation or update of TV channels e Update of TV software e Other special features 1 In the home menu select Setup then press OK 2 Select an item with the Navigation buttons then press OK e Quick picture and sound settings Guides you through picture and sound settings e TV settings Advanced picture and sound settings e Search for channels Guides you through channel installation e Channel settings Advanced channel settings e _ Connect to network Guides you through the connection to your PC network EN 17 English e Network settings Advanced network settings e Update software Guides you through an update of the TV software e Software settings Advanced TV update settings e Watch d
24. slideshow Press the Navigation buttons to select a picture then press OK Press again press I4 or Pll o pause or stop playback press OK o jump to the previous or next file Press 2 to exit content browser E to access or exit the following settings Show info Displays the file information Stop Stops slideshow Rotate Rotates Repeat Repeats Play once Plays he file the slideshow he file once Shuffle off Shuffle on Enables or disables random di he slideshow Slideshow speed splay of pictures in Sets the display ime for each pictu Listen to music Press the Navigation buttons to select a music track then press OK Press 4 f to fast forward a track re in the slideshow Slideshow transition Sets the ransition from one picture to the next Set as Scenea Sets the selected picture as wallpaper on TV rewind or fast Press 2 to exit content browser Press to access or exit the following settings Stop Stops audio playback Repeat Repeats a song or an album Play once Plays the file once Shuffle on Shuffle off Enables or disables random pl Watch video Press the Navigation buttons to select a video file then press OK Press or P to rewind or fast forward a file Press 2 to exit the ay of songs content browser During video playback press to access the following settings e Sto
25. CAM service Insert SD card Memory size To download rented videos from Net TV insert an SD memory card in the TV SD card slot Once formatted leave the card permanently in the slot SD memory size Use a blank SD memory card The SD card should contain a minimum storage capacity of 4 GB For high definition video ensure that you use an SD card with at least 8 GB of storage capacity Caution Ensure that you follow the instructions described in Connect the TV gt Insert SD card gt Insert and format Page 62 Wrong insertion of the SD card may damage your SD card All existing content on the SD card will be erased prior to the downloading of rented videos Note This TV has a standard SD card slot and the SD card is solely for use in Videostore EN 62 Insert and format 1 Switch on the TV 2 Before you insert the SD memory card remove the Conditional Access Module from the TV 3 Insert the SD memory card with its front label facing out into the SD card slot The TV will automatically start formatting 4 Leave the SD card permanently in the slot 6 Troubleshooting Contact us f you cannot resolve your problem refer to he FAQs for this TV at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as isted in the leaflet accompanying your product ake a note of your TV model and serial number before you contact Philips
26. Information on end of use Inform yourself on the correct disposal of this TV and batteries see Get started gt Important gt End of use Page 10 Use a Kensington lock Your TV is equipped with a Kensington security slot on the bottom of the TV Purchase a Kensington anti theft lock not supplied to secure the TV K Position the TV Wall mount To mount the TV purchase a Philips TV mount or a compatible TV mount Check your TV screen size and match it against the list for the type of wall mount to purchase 32 inches 81cm 200mm x 300mm M6 37 inches 94cm 200mm x 200mm M6 40 inches 102cm 200mm x 200mm M6 42 inches 107cm 200mm x 200mm M6 46 inches 117cm 300mm x 300mm M8 Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors be sure to leave a clearance of at least 5 5cm 2 2 from the back of the TV For 32 inch to 42 inch TVs EN 11 English Before you wall mount the TV determine the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 11 mm max 13mm For 46 inch TVs Before you wall mount the TV determine the correct length of the screw You can determine the length of the screw by adding t
27. Internet update 43 software version 43 EN 71 English sound settings 34 specifications 66 standby 18 subtitle analog 29 subtitle digital 29 subtitle language 37 subtitles language 29 T echnical specifications 66 eletext 2 5 28 eletext digital text 27 eletext dual screen 27 eletext enable 27 eletext enlarge 27 eletext language 37 eletext menu 27 eletext search 27 eletext subpages 27 eletext Table Of Pages 27 U universal access enable 32 V Videostore format SD card 25 62 Videostore rent videos 25 visually impaired 32 volume adjust 19 volume mute 19 W websites 23 EN 72 PHILIPS OY 2011 Koninklijke Philips Electronics N V All rights reserved Document order number 313913703595
28. Register your product and get support at www philips com welcome 46PFL76x5H 42PFL76x5C 42PFL76x5H 40PFL76x5H 37PFL76x5H 37PFL75x5H 32PFL76x5C 32PFL76x5H 32PFL74x5H EN User Manual PHILIPS Q Contact information Belgi Belgique 0800 80 190 Gratis Gratuit Q CHAT www philips com support Bparapus 00800 11 544 24 Cesk republika 800 142 840 Bezplatny hovor Danmark 3525 8759 Lokalt opkald C CHAT www philips com support Deutschland 0800 000 7520 kostenfrei C CHAT www philips com support EM 8a 0 0800 3122 1280 KArjon Xwpis xp con Espana 900 800 655 Tel fono local gratuito solamente para clientes en Espa a Q CHAT www philips com support Estonia 8000100288 kohalik k ne tariifi France 0805 025 510 num ro sans frais C CHAT www philips com support Hrvatska 0800 222778 free Ireland South 1 800 7445477 North 0 800 331 6015 Italia 800 088774 Numero Verde KasakcraH 7 727 250 66 17 local Latvia 80002794 local Lithuania 880030483 local Luxemburg Luxembourg 080026550 Ortsgesprach Appel local Magyarorsz g 06 80 018 189 Ingyenes h v s Nederland 0800 023 0076 Gratis nummer Norge 22 70 81 11 Lokalsamtale Osterreich 0800 180 016 Polska 00800 3111 318 Portugal 0800 780 902 Chamada Gratis Poccua 495 961 1111 8800 200 0880 6ecnAaTHbIM 3BOHOK no Poccuu Rom nia 0800 894910 Apel gratuit 0318107125 Apel local Cp6uja 381 114 440 841 Lokalni
29. Speakers Hear visually impaired audio from speakers only e Blue Speakers headphones Hear visually impaired audio from speakers and headphones only 4 Press D to exit Note The green and yellow buttons are not applicable if EasyLink Remote Control is enabled For more information see Connect the TV gt Use Philips EasyLink gt EasyLink features Page 58 Tip To verify whether visually impaired audio is available press and select Audio language Languages with an eye icon indicate visually impaired support Adjust volume for the visually impaired 1 In the Universal access menu press the yellow button to select Mixed volume 2 Press the Navigation buttons to move the slider up or down then press OK 3 Press 2 to exit Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV 1 In the Universal access menu press the blue button to select Key beep 2 Press the green button to turn on audio feedback or press the red button to turn it off 3 Press 2 to exit 4 Setup the TV Change picture and sound settings Settings assistant Use the settings assistant to guide you through the picture and sound settings 1 While watching TV press fft 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Start then press OK Follow the on screen instructions to
30. TV is in standby mode a startup splash screen is displayed then returns to standby mode This is normal behavior The startup screen is displayed when the TV is disconnected from the mains and reconnected To switch on the TV from standby press on the remote control or press any key on the side of the TV TV channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected No digital channels were found during the installation Check that the TV supports DVB T DVB C or DVB S in your country See the listed countries on the back of the TV Picture issues The TV is on but there is no picture or the picture is distorted e Checkthat the antenna is properly connected to the TV e Check that the correct device is selected as the TV source EN 63 English e _ Check that the external device or source is properly connected There is sound but no picture Check that the picture settings are correctly set There is poor TV reception from an antenna connection e _ Check that the antenna is properly connected to the TV e Loud speakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There
31. Use your TV gt Use Ambilight Page 21 Digital TV In addition to normal analog TV broadcasts your TV can receive digital terrestrial DVB T broadcasts Where available your TV can also receive digital cable DVB C and digital radio broadcast DVB Digital Video Broadcasting gives you better picture and better sound quality Some broadcasters also have several audio speech and or teletext languages available with digital broadcast Multimedia View or play your own multimedia files such as photos music and videos from the USB connection on the side of the TV or directly from your PC See Use more of your TV gt Access multimedia Page 30 Access more information Programme guide EPG Electronic Program Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programs being broadcast e View upcoming programs e Group programs by genre e _ Set reminders when programs start e _ Set up preferred EPG channels Notes e EPGis not available in all countries e For more information on EPG see Use more of your TV gt Use EPG Page 28 On screen You are reading the on screen user manual This manual contains all of the information you need to install and use this TV Access the user manual by selecting Help in the home menu Before carrying out instructions temporarily close the user manual by pressing fft on the remote co
32. V settings gt EasyLink gt Auto subtitle shift 3 Select On then press OK to activate Audio only mode Audio only mode enables you to play audio from a connected Philips EasyLink device through the TV speakers while the TV is in standby Press IIl to receive audio from the connected Philips EasyLink device If available audio only mode is enabled Accept the prompt on the TV to enable audio only mode e Control the audio playback with the TV remote control Enable or disable EasyLink Remote Control Caution This is an advanced setting Verify that all connected HDMI CEC compliant devices support this setting Devices that do not support this setting will not respond to commands from the TV remote control 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt EasyLink Remote Control gt On or Off 3 Press OK to activate Notes e _ If you cannot exit from the connected device s menu press 2 e o switch back to TV control press ftt and select Watch TV e To control another device press and select the device from the home menu e Asummary of EasyLink buttons you can use with the TV remote control is available at Connect the TV Use Philips EasyLink gt EasyLink buttons Page 59 EasyLink buttons Control HDMI CEC compliant devices with the following buttons on the TV remote control e OK Starts pauses or resumes playback on the connec
33. ales the classic 4 3 format to 16 9 Not recommended for HD or PC e Wide screen Stretches the classic 4 3 format to 16 9 e Unscaled Provides maximum detail for PC Only available when PC mode is enabled in the Picture menu Notes e Depending on the picture source some picture formats are not available and will not be seen on screen Watch a connected device Change picture format Change the picture format to suit your viewing experience 1 Press al 2 Select a picture format then press OK to confirm Note You can access picture formats via the experience menu Ii and the Setup menu The following picture formats can be selected EN 20 Add new device Notes e Before watching a connected device you must add it to the home menu e HDMI ARC compliant devices connected to the HDMI ARC connector on the TV are automatically added to the home menu 1 Connect and switch on the device 2 Press fft 3 Select Add your devices then press OK Follow the on screen instructions Watch connected device 1 Press fft 2 Select the device from the home menu 3 Press OK to confirm your choice Use Ambilight Switch on Ambilight Enjoy a more relaxed viewing experience and improved perceived picture quality Dim the lighting conditions in the room for the best Ambilight effect Caution To avoid bad infrared remote control reception place your devices out of sight
34. ard Adjusts picture settings to suit most environments and types of video Factory default settings e Photo Ideal settings for viewing photos e Custom Allows you to customize and store personal picture settings 3 Press OK to confirm your choice 4 Press 2 to exit Use Smart sound settings Use the Smart sound experience menu to access frequently used sound settings 1 While watching TV press IEI 2 Select Smart sound then select one of the following settings e Personal Sets the TV to your personal preferences set in the Sound menus in Setup e Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 3 Press OK to confirm your choice 4 Press 2 to exit e Auto fill Adjusts the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarges the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC e Super zoom Removes the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Sc
35. ce liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weighs more than 25kg 55 lbs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand Risk When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no re
36. cessary PC system requirements 4 Enter the code printed on the CD ROM envelope 5 Click the Download now button to download the free Wi Fi MediaConnect software 6 Once downloaded start the file Wi Fi MediaConnect setup exe 7 Follow the on screen instructions Project your PC Name your TV If you have two or more TVs in your home network differentiate them with unique names 1 Press fft then select Setup gt Network settings gt TV network name 2 Press OK to open the on screen keyboard 3 Enter the TV name with the on screen keyboard then press OK Project your PC Help To read the Wi Fi MediaConnect Help right click the program icon in the notification tray of the PC and select Help Specifics e You can project high definition HD or standard definition SD video depending on the processing power of your PC e Certain commercial DVD Blu ray discs may not be projected to the TV due to output content protection e he TV shows PC media files with a small delay e Wi Fi MediaConnect is only available for PC Project your PC PC requirements Minimum specifications e Windows XP Vista Windows 7 PC only e Intel Pentium Core 2 Duo 1 8GHz e 512MB RAM e 200MB free hard disk space e Wi Fi 802 11 nternet connection Project your PC PC requirements Recommended specifications e Windows XP Vista Windows 7 PC only EN 39 English e Intel Pentium Core 2
37. choose your preferred settings Smart picture settings Use the Smart picture experience menu to access frequently used picture settings 1 While watching TV press IEI 2 Select Smart picture then select one of the following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting e Cinema Ideal settings for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings e Standard Adjusts picture settings to suit most environments and types of video Factory default settings e _ Photo Ideal settings for viewing photos e _ Custom Allows you to customize and store personal picture settings 3 Press OK to confirm your choice 4 Press 2 to exit More picture settings 1 Press fft 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to adjust Smart picture Accesses pre defined smart picture settings Reset Resets to factory default settings Contrast Adjusts the intensity of bright areas keeping dark areas unchanged Brightness Adjusts the intensity and details of dark areas Colour Adjusts color saturation Hue Compensates color variations in NTSC encoded transmissions Sharpness Adjusts sharpness in the image Noise r
38. ctronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health Environmental efforts This TV has been awarded the European Union Ecolabel for its environmental qualities A TV that is awarded the Ecolabel contains energy efficient features To access energy saving settings whilst watching TV press the green button on the remote control These energy efficient settings include e Energy saving picture settings To apply a combination of picture settings which reduces energy consumption press the green button and select Energy saving smart setting e Ambient light sensor To save energy the built in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens e Mute screen Tums off the TV display Other functions including sound continue to operate normally Muting the screen saves energy if you just want to listen to audio from the TV See Setup the TV g
39. d is not muted e Check that the TV speakers setting is on in the sound menu e Check that the TV audio output is connected to the audio input on the DMI CEC enabled EasyLink compliant TS device Sound should be heard from the HTS speakers There is picture but sound quality is poor Check that the sound settings are correctly set There is picture but sound comes from one speaker only Verify that sound balance is set to the center HDMI connection issues There are problems with HDMI devices ote that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e fthe TV does not recognize the HDMI device and no picture is displayed try switching the source from one device o another and back again e fthere are intermittent sound disruptions check that output settings from the HDMI device are correct e If you use an HDMI to DVI adapter or Browse PC or Net TV access is slow HDMI to DVI cable check that an Refer to your router s user manual for additional audio cable is connected to information on transfer rate and other AUDIO L R or AUDIO IN mini jack factors of signal quality only You need a high speed Intemet connection for your router You cannot use EasyLink features Check that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compat
40. e the on screen keyboard to enter the web address you need Select a character and press OK to enter it in the address line at the top of the page Once you have entered the address select Go and press OK to load the Internet website Use the Navigation buttons to navigate to the available links on an open Internet page press OK to go to the link Internet history Net TV will automatically add every site you visit to the history list Later you can select a site icon in the list and press OK to open it To scroll through the history list use the Navigation buttons Clear Net TV history With a site icon selected in the history list you can clear the whole list Press Options and select Clear history Video stores With this TV you can rent a video from an online video store 1 Open a video store You may need to register or enter your log in 2 Select a video 3 Make the online payment 4 Download the video 5 Start watching What you need To rent and download a video you need a high speed Internet connection to the TV Read more about connecting to the network in Setup the TV gt Setup network Page 38 You also need an SD memory card to insert into the TV SD card slot Formatting an SD card To format an SD memory card as video memory insert the SD card in the SD slot The TV will automatically start to format the SD card If the write speed is insufficient for video transf
41. eduction Filters and reduces noise in an image Tint Adjusts the color balance in an image Custom tint Customizes tint setting Pixel Plus HD Accesses advanced settings including 100 Hz Clear LCD Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement HD Natural Motion Gamma PC mode Enables picture settings adjustment when a PC is connected to the TV via HDMI If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content Light sensor Adjusts settings dynamically to match lighting conditions Custom tint Customizes tint setting Pixel Precise HD Accesses advanced settings including HD Natural Motion 100 Hz Clear LCD Advanced sharpness Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement Gamma EN 33 English e PC mode Enabled by default if you select Computer in the home menu If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content If a PC is connected via HDMI or VGA this option is enabled by default e Light sensor Enables dynamic adjustment of the screen display to match lighting conditions e Picture format Changes the picture format e _ Screen edges Changes the picture size e Picture shift Adjusts the position of the picture Not applicable if selected
42. el to unhide then press Bg 6 Select Unhide channel then press OK Repeat steps 5 and 6 to unhide other channels Rename channels After installation you may want to rename channels to suit your preference 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press Ef 4 Select Rename then press OK 5 n the entry screen that appears press the Navigation buttons or Numeric buttons to edit the name then press OK 6 Once complete press the Navigation buttons to select Done e lo clear the entry select Clear e To cancel select Cancel 7 Press OK to confirm your choice 8 Press 2 to exit Hide or unhide channels Hide channels Hide channels from the channel list to prevent unauthorized access 1 While watching TV press LL 2 Select Channel list then press OK 3 In the channel list select the channel to hide then press EF 4 Select Hide channel then press OK The channel is hidden Update channel list When the TV was switched on for the first time a full installation of channels was performed You can set the TV to add or remove digital channels automatically You can also manually start the channel update Automatic update To set the TV to update digital TV channels automatically leave the TV in standby mode Once a day the TV updates earlier found channels and stores new channels Empty channels
43. elect a page 1 Press LLL 2 Select Text then press OK 3 Select a page by e _ Entering the page number with the Numeric buttons e Pressing amp V or I Pi to view the next or previous page e Pressing the Color buttons to select a color coded item 4 Press 2 to exit teletext Select a teletext language Some digital TV broadcasters have several teletext languages available You can set your primary and secondary language 1 Press fft 2 Select Setup gt Channel settings or Satellite settings gt Languages gt Primary Text or Secondary Text 3 Select your preferred teletext languages then press OK Access teletext options 1 When in teletext press Pt 2 Select an option e Freeze page Unfreeze page Freezes or unfreezes the current page e Dual screen Full screen Enables or disables dual screen teletext which splits the current channel or source to the left of the screen with teletext on the right e T OPP overview Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers e Enlarge Normal view For more comfortable reading you can enlarge the teletext page Press the Navigation buttons to move around the enlarged screen e Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles e Cycle subpages Cycles through subpages automatically if subpag
44. em audio control When you connect your TV to for example a HDMI CEC compliant Home Theatre System HTS your TV speakers automatically mute and audio from the TV plays through the HTS For more information about system audio control and other types of TV speaker configurations see Connect the TV gt Use Philips EasyLink gt TV speakers Page 60 EasyLink Remote Control EasyLink Remote Control allows you to control HDMI CEC compliant devices using your TV remote control To enable EasyLink Remote Control see Connect the TV gt Use Philips EasyLink gt Enable or disable EasyLink Remote Control Page 59 Pixel Plus Link Connected Philips EasyLink devices may apply their own picture quality processing to a video before streaming it to the TV This may interfere with the image processing of the TV Enable Pixel Plus Link to discard picture quality processing from connected Philips EasyLink devices To enable Pixel Plus Link 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt Pixel Plus link gt On 3 Press OK to activate Auto subtitle shift Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on your TV The video image is thus stretched across the whole of your TV display without the need to create a separate subtitle bar at the bottom of the screen To enable auto subtitle shift 1 Press fft 2 Select Setup gt T
45. emos Demos of special features available with the TV Options Option menus offer convenient settings related to what is on screen 1 Press to see what options are available 2 To exit press again Watch TV Switch on off or to standby To switch on e If the front LED indicator is off press the power switch 1 on the bottom of the TV to the position EN 18 e If the front LED indicator is red press on the remote control 2 Alternatively switch on the TV from standby by pressing any key on the side of the TV Notes e hefront LED indicator does not turn on when the TV is switched on e he TV requires some time to start up During this time the TV will not respond to the remote control or side controls This is normal behavior To switch to standby Press on the remote control The front LED indicator switches to red To switch off Press the power switch on the bottom of the TV to the o position The TV switches off Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time switch off the TV using the power switch on the bottom of the set Tip If you cannot locate your remote control and want to switch on the TV from standby press P CH on the side of the TV Switch channels e Press IM Pl on the remote control or P CH on the side of the TV e Pres
46. er the TV will reject the SD card Once formatted leave the card permanently in the SD slot Read Connect the TV gt Insert SD card Page 62 View a video store To view a video store press fft select Net TV gt Video stores and press OK The Video stores page shows the available stores for your country To view a store select its icon and press OK Rent a video To rent a video select its icon on the video store page and press OK In most cases you can rent a video for 1 day or for a couple of days or even just 1 hour The way you select and rent a video varies from store to store Payment The store will ask you to log in or to open a new log in account if you don t already have one The login might consist of your email address and a personal PIN code When you are logged in you can select the payment method a credit card or a value code in most cases Consult the video store website for more information on their payment terms e To enter a number code PIN use the Numeric buttons on the remote control e To enter an email address select the text field on the page and press OK Select a character on the keyboard and press OK to enter it Download the video Once payment is complete you can download the video on to the video memory During the download you can carry on watching the TV programme until the TV notifies you that the video is ready to play If you cancel a download yo
47. es are available Select subpages A teletext page number can hold several subpages These subpages are shown on a bar next to the main page number When available on a teletext page press 4 or P to select subpages Search teletext 1 When in teletext press OK to highlight the first word or number 2 Press the Navigation buttons to skip to the word or number to search 3 Press OK to begin the search 4 Press d until no word or number is highlighted to exit the search Use digital teletext Some digital TV broadcasters offer dedicated digital text or interactive services on their digital T V channels for example BBC1 When in digital teletext e Press the Navigation buttons to select or highlight items e Use the Color buttons to select an option then press OK to confirm or activate Note Digital text services are blocked when subtitles are broadcast and Subtitles are enabled Read Use more of your TV gt Use subtitles Page 29 EN 27 English Use Teletext 2 5 Teletext 2 5 offers more colors and better graphics than normal teletext If Teletext 2 5 is broadcast by a channel it is switched on by default To switch Teletext 2 5 on or off 1 Press fft 2 Select Setup gt TV settings gt Preferences gt Text 2 5 gt On or Off then press OK Favorite channels e Setreminders when programs start e Setup preferred EPG channels Note EPG is not available
48. ettings is available in Setup the TV gt Change language settings gt Audio Subtitle Teletext languages Page 37 EN 29 English Access multimedia Browse USB You can view photos or play music and videos on TV from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device You can access the USB content browser using one of the following methods e When watching TV connect the USB device to the USB port on the side of your TV e Press ft Select Browse USB then press OK View slideshow Press the Navigation buttons to select a picture then press OK o pause or stop playback press OK again e To jump to the previous or next file press I4 or Pll e Press D to exit content browser Press to access or exit the following settings e Show info Displays the file information e Stop Stops slideshow e Rotate Rotates the file e Repeat Repeats the slideshow e Play once Plays the file once e _ Shuffle off Shuffle on Enables or disables random display of pictures in the slideshow e Slideshow speed Sets the display time for each picture in the slideshow e Slideshow transition Sets the transition from one picture to the next e _ Set as Scenea Sets the selected picture as wallpaper on TV EN 30 Listen to music Press the Navigation buttons t
49. ew 10 green eco settings 10 H hearing impaired 32 home menu 16 home mode 42 information on Internet 13 information on screen 13 install channels manual 36 K kensington lock 11 L language menu 38 language others 37 location home or shop 42 location stand or wall mount 42 Lounge light 21 M menu add device 17 menu browse 16 menu channel list 17 menu home 16 menu language 38 menu options 18 menu setup 17 multimedia play files 30 mute TV speakers 19 N Net TV browse 23 Net TV clear history 24 Net TV online TV 25 O options menu 18 P pc network settings 40 pc network media server 40 pc network wired 39 PC connect 57 cture format 20 D Bi cture settings 33 position TV 12 power 66 R rear connectors 47 recycle e 10 register product 8 remote control on screen 16 remote control overview 14 rename channels 35 reorder channels 35 S safety 8 Scenea enable 31 Scenea lounge light 21 Scenea upload picture 31 screen care 9 SD card 25 62 SD card memory size 62 settings assistant 33 settings picture 33 settings sound 34 shop mode 42 side connectors 48 sleeptimer 28 smart card 61 smart picture 19 smart sound 20 software digital update 43 software
50. f EN 14 1 Ambient sensor remote control sensor Remote control Overview PAN 1 Standby Switches the TV to standby if it is on Switches on the TV if it is in standby 2 ft Home Accesses the home menu 3 LI Browse Accesses the browse menu to select TV channel list the Electronic Program Guide and teletext 4 V 4 Navigation buttons Navigates menus and selects items 5 I P I Previous Next Switches channels Also skips through pages of a menu and between tracks albums or folders 6 OK Confirms an entry or selection 7 IN Experience Accesses the experience menu 8 amp Options Accesses options for the current activity or selection 9 Volume and amp Mute Increases or decreases volume mutes or restores audio 10 Color buttons Selects tasks or options Not supported in MHEG mode 11 0 9 Numeric buttons Selects a channel or setting 12 EI Picture format Selects a picture format 13 CJ Subtitle Enables or disables subtitles 14 2 Back Returns to a previous menu screen Press and hold to return to watching TV Not supported in MHEG mode Batteries Open the battery cover on the back of the remote control to insert the batteries Type AAA LRO3 1 5V or Type CR2032 3V Make sure the and ends of the batteries line up correctly and are marked inside Remove the batteries if you are not using the rem
51. f a USB storage device is connected accesses the content browser e Browse PC Accesses the content browser of the connected PC network e Browse Net TV Accesses Net TV e Scenea Switches to the Scenea wallpaper e Add your devices Adds new devices to the home menu e Setup Accesses menus that allow you to change picture sound and TV settings Browse The browse menu gives you easy access to e _ Electronic program guide e TV channel list e Teletext To access the browse menu while watching TV press LL 1 Press the Navigation buttons to select an item e _ Programme guide Accesses the Electronic Program Guide e Channel list Accesses the TV channel list e Text Accesses teletext 2 Press OK to confirm your choice Channel list The channel list displays the TV channels and possible radio stations installed on your TV 1 While watching TV press LLL 2 Select Channel list then press OK 3 Select a channel then press OK to access the channel 4 Press D to exit the channel list without changing the channel Experience Press lll to access the experience menu which provides a range of frequently used settings amp zz gt The experience menu gives you easy access to e Ambilight Turns Ambilight on or off e Ambilight dynamic Adjusts the speed of Ambilight response e Picture format Changes the picture format e _ Smart
52. g position Reset to factory settings Resetting your TV to factory settings restores default picture and sound settings Channel installation settings remain the same 1 While watching TV press fft 2 Select Setup gt TV settings gt Factory settings then press OK TV settings are reset back to the factory default Start a TV demo Start a demo to find out more about your TV s features Note Demos are not supported on MHEG channels 1 While watching TV press fft 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK 4 Press D to exit the demo Change channel settings Reorder channels After installation you may want to reorder the channel list to suit your preference 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press Ef 4 Select Reorder then press OK 5 Select the channel to reorder move it to the desired location then press OK 6 Select Insert to insert the channel into the desired location Swap to swap location with another channel or Cancel to cancel the reorder 7 Press OK to activate Unhide channels 1 While watching TV press LLL 2 Select Channel list then press OK 3 In the channel list press 4 Select Show hidden channels then press OK Hidden channels appear in the channel list but without channel information displayed 5 Select the chann
53. g sharpness and with a HDMI cable playing a DVD disc picture quality of HD TV you can watch the e an over the air HD broadcaster DVB High Definition video clip from the Home T MPEG4 menu Press gt Setup gt Watch demos on the second page of the setup menu EN 7 Contact your dealer for more information Go to www philips com support to find FAQs that list the HD channels or providers in your country Network and Net TV Internet A Router Network When you connect your TV to your home network you can play music photo and video from a computer or other media server on the same network Read more in Help gt Setup the TV gt Setup Network Page 38 Available on certain models only Net TV When the connected PC network is connected to the Internet you can connect your TV to Net TV Net TV offers movies pictures music and much more Read more in Help gt Use your TV gt Enjoy Net TV Page 22 Available on certain models only Important Congratulations Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome Safety Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply EN 8 Risk of electric shock or fire Never expose the TV to rain or water Never pla
54. he thickness of your wall mount to the screw length shown in the graphic min 15 mm max 18 mm e While seated your eyes should be level with the center of the screen e _ For best Ambilight effect position the TV 25 cm away from the wall Product highlights Full HD LCD display This TV is equipped with a full High Definition HD LCD display supporting the maximum HD resolution of 1920x1080p This display offers a brilliant flicker free progressive scan picture with optimum brightness and superb colours The LED backlight of the display offers exceptional picture contrast with exceptional energy saving Placement e _ Before positioning the TV read all safety precautions See Get Started gt Important gt Safety Page 8 e Position the TV where light does not shine directly on the screen e he ideal distance to watch TV from is hree times its diagonal screen size For example if the diagonal screen size of he TV is 116cm 46 the ideal viewing distance is 3 5m 138 from the front of the screen EN 12 Ambilight Ambilight is the lighting technology that emanates from the back of the television onto the wall This innovative technology automatically adjusts the colour and brightness of the light to match the TV picture This creates an unprecedented improvement in viewing experience The light also reduces eyestrain thus providing a more relaxing viewing experience See
55. ible If a HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased This behavior is normal when a HDMI CEC audio device is connected USB connection issues USB device content is not displayed e Check that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation e Check that the USB storage device is compatible with the TV e Check that the audio and picture file formats are supported by the TV Audio and picture files do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV causing poor playback Network connection issues Applicable to certain models only Net TV does not work If the connection to the router is properly set up check the router connection to the Internet EN 65 English 7 Technical data Overview Product information is subject to change without notice For detailed product information go to www philips com support Power and reception Power e Mains power AC 220 240V 50 60Hz e _ Standby power lt 0 15W e Ambient temperature 5 to 40 degree Celsius e For power consumption see the product specifications at http www philips com s upport Reception e _ Antenna input 5ohm coaxial IEC75 e TV system DVB COFDM 2K 8K e Video
56. iew Before you connect devices to the TV verify which connectors are available on the device Connect the device to the TV with the highest quality connection available Good quality cables ensure a good transfer of picture and sound The connections shown in this user manual are recommendations only Other solutions are possible Tip If your device only has composite RCA connectors use a SCART cinch adapter to connect the device to a SCART connector on the TV EN 45 English Add your devices When you have connected a device to the TV always add this device as an item in the home menu With this item in the home menu you can easily switch to view from this device To add a new device press fft then select Add your devices Follow the on screen instructions HDMI An HDMI connection has the best picture and sound quality e One HDMI cable combines video and audio signals Use HDMI for High Definition HD TV signals and to enable EasyLink e he HDMI ARC connector on the TV features HDMI ARC functionality This allows output of TV audio to an HDMI ARC compliant device e Do not use an HDMI cable longer than 5 meters 16 4 feet COSO EN 46 Y Pb Pr Use the Component Video Y Pb Pr connection together with an Audio Left and Right connection for sound Match the Y Pb Pr connector colours with the cable plugs when you connect Y Pb Pr can handle High Definition HD TV sig
57. inment games and many more all fit for your TV screen Once the network is installed select Browse Net TV in the home menu to open the Net TV start page EN 38 What you need WARNING This TV complies with the EMC directive only when you use a shielded Cat5 ethernet cable To connect the router to your TV we strongly recommend that you use an ethernet cable which is shorter than 3 meters To connect the TV to a PC network and internet you need a router in your PC network Set the router to DHCP On Connect the router to the TV with a network Ethernet cable To enjoy Net TV connect the TV to a router with a high speed connection to the internet You can also connect this TV to a PC network wirelessly via an optional wireless USB adaptor Check with your local retailer for purchase details Internet 7 a Router The PC network feature is DLNA 1 5 certified You can use Microsoft Windows XP or Vista Intel Mac OSX or Linux on your computer To share PC content on your TV you need recent media server software on your computer Windows Media Player 11 or similar The media server software needs to be set to share files with your TV For the list of supported media server software read Technical data gt Multimedia Page 67 Note In case the apparatus does not recover in DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention i
58. ith Parental control switched on you can lock and unlock services and or categories of services You can also unlock some services that are not suitable for children These services are locked from the start Parental control specifics e _ Only services on the Net TV pages can be locked Advertisements and Internet websites cannot be locked e _ Services are locked per country Categories are locked for all countries Initial setup 1 Agree to the Terms of Use 2 Register for Net TV 3 Switch on parental control How to register To register you need an email address and a PC connected to the Internet If you skip the registration during the initial setup you can register from the Net TV Start page later To start the Net TV registration enter your email address on screen To open the on screen keyboard highlight the text field then press OK Enter the characters one by one Select Register and press OK A message will appear if a registration email has been sent to your email address Open the email on your PC and click the link to the registration form Complete the form and click the button to submit On the TV select OK and press OK to open the Net TV Start page Switch on Parental control The first time you open the Net TV Start page you can switch on parental control If you switch on parental control you need to enter a personal lock unlock code Enter a 4 digit code as your Net TV lock unl
59. m the menu and select Add to Library In the Add to Library window select My folders and those of others that can access and click the Advanced Options button emmen Ez Gea With Advanced Options open you can add specific folders to the list to share and click Add In the Add Folder window select a folder with music photos or videos which you want to share with other devices and click OK In the Add To Library window the newly added folder is shown You can add more folders to share Click the OK button to add the files to the library You can now enjoy music photos and videos on your TV EN 41 English Change other settings Energy efficient settings 1 While watching TV press the green button 2 Select one of the following settings then press OK e Energy saving Applies a combination of picture settings to reduce energy consumption e Mute screen Turns off the TV display Muting the screen saves energy if you just want to listen to audio from the TV e Light sensor To save energy the built in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens Audio lipsync Turn on digital audio lipsync to automatically sync the image on your TV to audio from a connected Home Theatre System 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Audio Out delay gt On then press OK
60. nals Audio L R YPbPr 200000 O SCART A SCART cable combines video and audio signals SCART connectors can handle RGB video signals but cannot handle High Definition HD TV signals C Joe e cooc TV connectors overview Bottom Rear 1 EXT 1 SCART Analog audio and video input from analog or digital devices such as DVD players or game consoles 1 NETWORK Data input from a network 2 DIGITAL AUDIO OUT Digital audio 2 EXT 2 SCART Analog audio and video output to home theaters and other digital input from analog or digital devices such as audio systems DVD players or game consoles 3 HDMI Digital audio and video input from 3 SERV U For use by service personnel high definition digital devices such as Blu ray only players 4 EXT 3 Component Y Pb Pr Analog audio and video input from analog or digital devices such as DVD players or game consoles 5 x Stereo audio output to headphones or earphones EN 47 English 4 HDMI ARC In addition to regular HDMI functionality outputs TV audio to a HDMI ARC compliant device such as a home theatre system 5 AUDIO IN Audio input from a computer 6 ANTENNA Signal input from an antenna cable or satellite 7 VGA Video input from a computer Side 2 USB Data input from USB storage devices 3 CI Common Interface Slot for a Conditional Access Module CAM 4 SD CARD Slot for a SD memory card 1
61. nd quality If you connect a device to this TV access the Home menu to add it Press ft gt Add your devices then follow the on screen instructions Ensure that you select the correct TV connector which the device is connected to Read more in Help gt Use your TV gt Basic TV Menus gt Add your devices Page 17 If you connect an EasyLink HDMI CEC compliant device to the TV it is automatically added to the Home menu Access the Home menu and select the newly added device icon Read more in Help gt Connect the TV gt Use Philips EasyLink Connect DVD players Blu ray Disc players Page 58 or game consoles through HDMI In Help gt Connect the TV Page 45 you can learn to connect the most common devices through illustrations for example SS DVD player e a digital HD receiver connected with High Definition TV an HDMI cable playing HD content You can watch High Definition HD from a cable or satellite operator programs in HD picture quality e a HD channel on your DVB C network If you watch non HD programs the picture e aHD game console for example X quality will be similar to non HD TVs Box 360 or PlayStation 3 connected with an HDMI cable playing a HD Your TV can display HD video content from game e a Blu ray disc player connected with a HDMI cable playing a Blu ray disc HD video clip e an upscaling DVD player connected To experience the stunnin
62. ntrol Open to the same page in the user manual by selecting Help in the home menu Net TV Net TV allows you to enjoy movies music and other infotainment from the Internet directly on your TV screen See Use your TV gt Enjoy Net TV Page 22 To enjoy Net TV you must connect the TV to a network See Setup the TV gt Set up network Page 38 Video store The Philips Video store gives you access to a wide range of high quality movies that you can watch directly on your TV See Use your TV gt Enjoy Net TV gt Video stores Page 25 On the Internet A printable PDF version of this user manual is available on the Internet It contains the latest information and detailed feature explanations not covered by this on screen user manual Access the PDF as well as other product information including FAQs and firmware upgrades at www philips com support EN 13 English 2 Use your TV Overview This section gives you an overview of commonly used TV controls and functions Side controls and indicators 1 lt Increases or decreases volume In home menu these buttons allow you to move horizontally 2 ft Accesses the home menu Press again to launch an activity in home menu 3 P CH Switches to the next or previous channel In home menu these buttons allow you to move vertically 4 B Ambilight Switches Ambilight on or off During TV standby switches lounge light on or of
63. nts Security settings appear Click Enable sharing for new clients automatically then click Save Changes Media sharing is enabled Add folders for media sharing In the Basic Setup box click Sharing Sharing settings appear Click Browse to add a folder location Click Add new content directory to add more folders When all folders are added click Save changes then click Rescan content directories Media files are ready to be accessed from the TV Note The instructions are applicable to both Microsoft Windows XP and Vista Enable media sharing In Microsoft Windows start Windows Media Player 11 Windows Media Player appears EES In the Media Sharing window check the Share my Media and click OK If no network connection is found and you are unable to check this box click the Networking button to show the Network and Sharing Center window jar Set Network discovery to On Set File sharing to On Go back to the Media Sharing window in Windows Media Player and check the Share My Media box Click OK When the TV is connected by the router to the PC and everything is switch on the Media Sharing window will detect the TV as an Unknown Device Select the device and click Allow To change particular settings on media sharing open the Settings window When the device icon the TV is checked with a green tick click OK Set folders for sharing In Windows Media Player select Library fro
64. o select a music track then press OK e Press 4 b to fast rewind or fast forward a track e Press to exit content browser Press to access or exit the following settings e Stop Stops audio playback e Repeat Repeats a song or an album e Play once Plays the file once e Shuffle on Shuffle off Enables or disables random play of songs Watch video Press the Navigation buttons to select a video file then press OK e Press or P to rewind or fast forward a file e _ Press to exit the content browser During video playback press to access the following settings e Stop Stops playback e Repeat Repeats a video e Shuffle on Shuffle off Enables or disables random play of videos Browse PC View photos play music and watch videos on TV from a PC or another storage device in your home network To browse your PC network first set up the network connection see Setup the TV gt Set up network Page 38 If the network is not installed the first time you access Browse PC the network installation starts Follow the on screen instructions To access the PC network In the home menu select Browse PC then press OK With the PC and router switched on the TV displays the multimedia server content from your PC With the PC content list open on screen select the file you want to play and press OK A song a slideshow of photos or a video starts playing View
65. ocedure If the error reoccurs contact Philips Consumer Care 1 Switch on the TV 2 Connect the USB flash drive containing the upg Help file to the USB connector on the TV Disconnect all other USB devices from the TV 3 Press fft 4 Select Setup gt Software settings gt Local updates The updates screen appears 5 Select the upg Help file and press OK A message will display the update status Follow the on screen instructions to complete the update and restart your TV EN 44 Reinstall che TV Reinstalling your TV resets all picture and sound settings and reinstalls all TV channels 1 Press fft 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the on screen instructions 5 Connect the TV First connections Power Be sure that the power plug in the wall socket is accessible at all times When disconnecting the power cable always pull the plug never the cable Although this TV has a very low standby power consumption switch off the TV using the power switch on the bottom of the TV if you do not use the TV for a long time Antenna Locate the antenna connector at the back of the TV Insert the antenna cable securely into the antenna connector Note To receive DVB S broadcasts insert the antenna cable into the SAT DVB S connector on the side of the TV This is available on certain models only About cables Overv
66. ock code Use the Numeric buttons on the remote control Enter the same code again to confirm Net TV is ready for use Browse Net TV Access the Net TV home page 1 Press fft 2 Select Browse Net TV then press OK The TV links up to Net TV and opens the start page To exit Net TV press fft and select another activity The Start page The Start page shows your favorite services and some recommended services You can browse Net TV from this page To return to the Start page press LLI Browse Open a Net TV service Select a Net TV service with the Navigation buttons o open a selected service press OK A closing lock animation means that the page you have opened is a secure page Navigate a Net TV service Navigating within a Net TV service can differ from one service to another You can use the Navigation buttons and the OK button to browse the service Some services indicate how to browse their services To go back to the previous page press 2 Back All services To view the available services for your country select Services and press OK On this page you can view all services or view them by category e g News or Entertainment To view the services by category select a category in the column on the left and press OK Options Press Options to select the following e lock service e Mark favorite e Disable parental control e Show remote control e Reload page e Zo
67. ode enter 8888 1 While watching TV press fft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual installation gt System then press OK 3 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 In the Analogue Manual installation menu select Find channel then press OK 2 Press e he Navigation buttons or Numeric buttons to manually enter the channel frequency e he Navigation buttons to select Search Press OK to automatically search for the next channel 3 When the correct channel frequency is entered select Done then press OK 4 Select Store current channel to store the fine tuned channel as the current channel number or select Store as new channel to store it as a new channel number Install digital channels You can reposition your antenna to improve the reception You need to know the correct frequency to tune For best results contact the service provider or get a professional installer Note If you are prompted to enter a code enter 8888 1 Press fft 2 Select Setup gt Channel settings gt Channel installation gt Digital Reception test gt Search then press OK 3 Press the Numeric buttons to enter the channel frequency 4 Select Search then press OK 5 When the correct channel is located select Store then press OK 6 Press 2 to exit
68. om page e _ Security info e Clear Net TV memory Lock service To lock a Net TV service select its icon and press Options Select Lock service and press OK The service icon is marked with a lock icon To open a locked service you must enter your 4 digit code Once you have opened a locked service you can delete the lock Mark favourites To mark a service as a favourite select the service icon and press E Options Select Mark favourite and press OK EN 23 English You can mark up to 12 services as favourites All your favourite services are shown in the Net TV Start page In Services favourite services are marked with a star Only Net TV services can be marked as favorites Advertisements and Internet websites cannot be marked Unmark favourites To Unmark a favourite select the icon of a favourite service and press Options and select Unmark favourite Disable parental control To switch off Parental control press Et Options and select Disable parental control Enter the 4 digit code to disable Parental control Show remote control Keys like Play amp Rewind and Fast Forward PP can be called up with Show remote control Press Ef Options and select Show remote control With these keys on screen you can operate the connected audio or video player Select a key and press OK to carry out its function Press 2 Back to hide these on screen keys Reload page If
69. ote control for a long time Dispose of batteries according to the end of use directives Read Get started gt Important gt End of use Page 10 Refers to the following for the location of the different battery compartments For remote control with AAA batteries end to end For remote control with AAA batteries side by side EN 15 English For remote control with coin cell batteries Basic TV menus On screen remote control Note Available if the connected device is HDMI CEC compliant An On Screen Remote Control OSRC gives you easy access to commonly used functions The on screen buttons available differ depending on your TV setup and features of the connected HDMI CEC device To access the OSRC 1 While watching TV or a connected device press Bt 2 Select Show device keys then press OK 3 Use the Navigation buttons and OK to select and use an on screen button EN 16 Home The home menu gives you easy access to connected devices picture and sound settings and other useful features 1 Press fft 2 Select an item in the home menu then press OK to access the menu 3 To exit the home menu press fft or D A N To start an activity highlight the desired item with the Navigation buttons and press OK e _ Help Accesses the electronic user manual e Watch TV Switches back to the antenna source if another source is selected e Browse USB I
70. out the remote control in Help gt Use your TV gt Remote control gt Overview Page 14 Alternatively find the answer in Search for Press d amp to select the next TV tour The TV menus PHILIPS Let s learn more about these frequently used menus e the Home menu ft e the Browse menu LLI e the Options menu e the Experience menu i EN 3 PHILIPS In the Home menu fft you can select the source to watch such as a TV channel or movies from a connected DVD player or USB flash drive You can also add a new device or access the Setup menu for more settings PHILIPS In the Browse Menu LL you can access Teletext the channel list or the electronic Program Guide EPG EPG is not available in all countries EN 6 PHILIPS In the Options menu amp you can select settings related to what is shown on screen For example while you watch a channel you can mark it as a favorite PHILIPS In the Experience menu Mf you can quickly adjust Ambilight picture and sound settings You can select the ideal picture setting for movies games or music Or you can change the picture format of the on screen image You can even change the surround settings for the TV speakers Available on certain models only You can also find the answer in Search for Press d amp to select the next TV tour Connect devices The HDMI connection offers the best picture and sou
71. p Stops playback e Repeat Repeats a video e _ Shuffle on Shuffle off Enables or disables random play of videos Listen to digital radio If digital broadcasting is available digital radio channels are installed automatically during installation 1 While watching TV press LLL 2 Select Channel list then press OK 3 In the channel list press 4 Select Select list gt Radio then press OK 5 Select a radio channel then press OK Use Scenea Activate Scenea You can use Scenea to display a picture as wallpaper on your TV Make sure that the location of your TV is set to Home mode 1 Press fft 2 Select Scenea then press OK The default or pre loaded picture is displayed Note If the sleeptimer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleeptimer For more information on the sleeptimer see Use more of your TV gt Use timers and locks gt Sleeptimer Page 28 Set a picture as Scenea Note The file size of the picture must not be more than 1MB 1 Connect the USB storage device to the TV 2 Press fft 3 Select Browse USB then press OK 4 Select a picture then press E 5 Select Set as Scenea then press OK 6 Select Yes then press OK 7 Press any key to exit Scenea EN 31 English Universal access Enable universal access Where supported by your digital TV
72. p or home mode The flexibility to change settings is limited if the TV location is set to Shop mode Set the TV location to Home mode to access all TV settings 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Location gt Home or Shop then press OK 3 Restart the TV Stand mount or wall mount Specific TV settings are applied to suit the mounting location of the TV 1 In the Preferences menu select TV placement gt On a TV stand or Wall mounted then press OK Update software TV software 1 Press fft 2 Select Setup gt Software settings gt Current software info then press OK The version of the current software is displayed To update the software use one of these options a update from digital broadcast b update with USB c update from the Internet For mo pages f available your TV can receive software updates via digital broadcasts f an update is available a message appears prompting you to update the software We strongly recommend that you update the software when prompted re information see the following Before performing this procedure be sure to e Setaside some time to complete the entire update ave available a USB flash drive with at east 256MB of storage space ave access to a computer with a USB port and internet access 1 Press fft 2 Select Setup gt
73. picture format is Auto zoom or Wide screen Smart sound settings Use the Smart sound experience menu to access frequently used sound settings 1 While watching TV press IN 2 Select Smart sound then select one of the following settings e Personal Sets the TV to your personal preferences set in the Sound menus in Setup e _ Standard Adjusts sound settings to suit most environments and types of audio e _ News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 3 Press OK to confirm your choice 4 Press D to exit EN 34 More sound settings 1 Press fft 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to adjust e _ Smart sound Accesses pre defined smart sound settings e Reset Resets to factory default settings e Bass Adjusts the bass level e Treble Adjusts the treble level e Surround Enables spatial sound e Headphones volume Adjusts headphone volume e Auto volume leveling Automatically reduces sudden volume changes for example when switching channels e Balance Adjusts the balance of the left and right speakers to best suit your listenin
74. playback NTSC PAL SECAM e Digital TV MPEG 4 DVB T Terrestrial DVB C Cable DVB S Satellite MHP Multimedia Home Platform Available in Italy only e Tuner bands VHF UHF S Channel yperband Available on certain models only Display and sound Picture Display e Display type LCD Full HD W UXGA e Diagonal size 32 inch 81 cm 3 inch 94 cm 40 inch 102 cm 46 inch 117 cm e _ Aspect ratio Widescreen 16 9 e Panel resolution 1920x1080p 100Hz EN 66 e Pixel Precise HD picture enhancement e 1080p 24 25 30 50 60Hz processing e 100Hz LCD Sound e Output power RMS 20W e Incredible Surround e Clear Sound e Dynamic Bass Enhancement e Mono Stereo NICAM Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1360 x 768 60Hz 1280 x 1024 60Hz 1600 x 1200 60Hz 1920 x 1080 60Hz Computer formats VGA Resolution refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1360 x 768 60Hz 1280 x 1024 60Hz 1600 x 1200 60Hz 1920 x 1080 60Hz Video formats Resolution refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 60Hz 1080i 50Hz 60Hz 1080p 24Hz 25Hz 30Hz 50Hz 60Hz Multimedia Supported multimedia connections
75. poziv Slovensko 0800 004537 Bezplatny hovor Slovenija 600 744 5477 lokalni klic Sverige 08 5792 9100 Lokalsamtal Suisse Schweiz Svizzera 0800 002 050 Schweizer Festnetztarif Tarif r seau fixe France Suomi 09 2311 3415 paikallispuhelu T rkiye 444 7 445 United Kingdom 0800 331 6015 Toll Free VkpaiHcbka 0 800 500 697 This information is correct at the time of print For updated information see www philips com support updated 20110912 Contents EN 1 Get started 3 TV Tour 3 Important 8 Position the TV 11 Product highlights 12 Access more information 13 2 Use your TV 14 Overview 14 Side controls and indicators 14 Remote control 14 Basic TV menus 16 Watch TV 18 Watch a connected device 20 Use Ambilight 21 Enjoy Net TV 22 3 Use more of your TV 27 Use teletext 27 Favorite channels 28 Use EPG 28 Use timers and locks 28 Use subtitles 29 Access multimedia 30 Use Scenea 31 Universal access 32 4 Setup the TV 33 Change picture and sound settings 33 Change channel settings 35 Install channels 36 Change language settings 37 Setup network 38 Change other settings 42 Update software 43 Reinstall the TV 44 5 Connect the TV 45 First connections 45 About cables 45 TV connectors overview 47 Connect devices 48 Connect more devices 54 Use Philips EasyLink 58 Use a CAM 61 Insert SD card 62 Troubleshooting 63 Contact us 63 General TV issues 63 TV channel is
76. s Selects the available subtitle language for digital channels e Primary Text Secondary Text Selects the available teletext for digital channels e Hearing impaired Enables or disables hearing impaired subtitles e Visually impaired UK only Selects the device for audio output EN 37 English e Volume Visually impaired UK only Adjusts the volume of the visually impaired audio e Preferred audio format Select Standard to receive standard audio format MPEG Select Advanced to receive advanced audio formats AAC EAC 3 or AC 3 if available e Mono Stereo Select Mono or Stereo if stereo broadcasting is available 4 Press 2 to exit Tip Set a secondary language in the same menu You receive this language if the primary language is unavailable Menu language 1 While watching TV press fft 2 Select Setup gt TV settings gt Preferences gt Menu language 3 Select a menu language from the list then press OK Setup network Benefits PC network If the TV is connected to your PC network you can play photos music and movies from a computer or storage device in that network Once the network is installed select Browse PC in the home menu to view PC content Net TV If the TV is connected to the PC network which is connected to the internet you can link up your TV to Net TV The Net TV start page offers you movies pictures music infota
77. s Switch the TV audio to the connected HDMI CEC audio device through the experience menu e EasyLink autostart Turn off TV speakers automatically and streams TV audio to the connected HDMI CEC audio device Switch TV audio in experience menu If EasyLink or EasyLink autostart are selected access the experience menu to switch the TV audio 1 While watching TV press DED 2 Select Speakers then press OK 3 Select one of the following then press OK e TV On by default Streams TV audio through TV speakers until the connected HDMI CEC audio device switches to system audio control Thereafter TV audio is streamed through the connected device e Amplifier Streams audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio will continue to stream from TV speakers if EasyLink was selected If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode Use HDMI ARC The HDMI 1 connector is HDMI Audio Return Channel ARC compliant Use it to output digital audio to a HDMI Home Theatre System HDMI ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device without the need for an additional digital audio cable Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using a HDMI cable attached to HDMI ARC connectors
78. s LD then select Channel list to use the channel list e Press D to return to the previously viewed channel e Enter a channel number using the Numeric buttons To view analog or digital channels only Filter the channel list to access analog or digital channels only 1 In the channel list press Ef 2 Select Select list gt Analogue or Digital then press OK Depending on your selection only digital or analog channels become available Adjust volume To increase or decrease volume Press on the remote control e Press J on the side of the TV To mute or unmute sound e Press to mute the sound e Press f again to restore the sound Use the Sound menu to adjust headphone volume For more information see Setup the TV gt Change picture and sound settings gt More sound settings Page 34 Use Smart picture settings Use the Smart picture experience menu to access frequently used picture settings 1 While watching TV press DK 2 Select Smart picture then select one of the following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting e Cinema Ideal settings for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings EN 19 English e _ Stand
79. s required Wired installation Connect the router to the TV using a network cable and switch on the router before you start the network installation To start the wired network installation close he user manual press ft gt Setup gt Connect to network and press OK Follow the instructions on screen to install he wired network The TV constantly searches for a network connection f asked for agree to the End User License Agreement Find the latest End User License Agreement at www philips com Wi Fi Ready Project your PC Introduction This TV is Wi Fi Ready With the Wireless USB adapter PTAO1 accessory sold separately you can connect the TV to your network wirelessly With the free Wi Fi MediaConnect software you can project your PC screen on the TV Video music or presentations that you play on your PC can be projected Available on certain models only What you need To use Wi Fi MediaConnect you need to connect the TV to your home network You need a wireless router Read more about connecting to a network in Help gt Setup the TV gt Setup network Page 38 Project your PC Install Wi Fi MediaConnect 1 Find the Wi Fi MediaConnect CD ROM that comes bundled with the PTAO1 adapter 2 Insert the CD ROM in your PC 3 Your PC starts your Internet browser and opens the Wi Fi MediaConnect download page www wifimediaconnect philips com On the website you can check the ne
80. something went wrong during the loading of a page you can try and reload it Press Options and select Reload page Zoom page To zoom in and out on an Internet page press Options and select Zoom page Use the slider bar to set the enlargement To scroll through an Internet page use the Navigation buttons to jump from highlight to highlight Security info To view a page s security information press E Options and select Security info EN 24 Clear Net TV memory Warning this option resets Net TV completely To clear the Net TV memory completely including your favorites the parental control code passwords cookies and history press E Options and select Clear Net TV memory Net TV services for another country Services may differ for each country To switch to the services of another country select Country at the bottom right of the page and press OK Select a country and press OK Koninklijke Philips Electronics N V bears no responsibility regarding the content and the quality of the content provided by the content service providers Internet websites With Net TV you can link up to the Internet You can view any website you like but remember that most Internet websites are not meant to be viewed on a TV screen and certain plug ins e g to view pages or videos are not available on your TV Open an Internet site To go to an Internet page select Internet and press OK Us
81. sponsibility for improper wall mounting that results in accident injury or damage Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Risk Risk ever place the TV on a surface covered by a cloth or other material hat can be pulled away Ensure that no part of the TV hangs over the edge of the mounting surface ever place the TV on tall furniture such as a bookcase without anchoring oth the furniture and TV to the wall r a suitable support ducate children about the dangers of climbing on fumiture to reach the TV O O of overheating ever install the TV in a confined space Always leave a space of at least 4 inches around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV of injury fire or power cord damage ever place the TV or any objects on he power cord To easily disconnect the TV power cord from the power outlet ensure hat you have full access to the power cord at all times When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and aerial before lightning storms During lightning storms never to
82. sues 63 Picture issues 63 Sound issues 64 HDMI connection issues 64 USB connection issues 65 etwork connection issues 65 Technical data 66 Overview 66 Power and reception 66 Display and sound 66 Display resolutions 66 ultimedia 66 Connectivity 67 Dimensions 68 Index 70 1 Get started TV Tour The remote control PHILIPS To switch TV channels PHILIPS To open or close the Home menu ft In the Home menu you can access connected devices picture and sound settings and other useful features PHILIPS To open or close the Browse menu LLL In the Browse menu you can access Teletext the channel list or the electronic Program Guide EPG EPG is not available in all countries EN PHILIPS PHILIPS To open or close the Options menu amp Back 2 Options menus offer convenient settings To return to the previous TV channel or related to what is on screen menu Press and hold to return to watching TV PHILIPS PHILIPS To open or close the Experience menu NI Red In the Experience menu you can access a range of frequently used settings To select the red option access digital Interactive TV services or watch TV demonstration clips Available on certain models only EN 4 PHILIPS Green To select the green option or the energy efficient settings PHILIPS Yellow To select the yellow option Blue To select the blue option Read more ab
83. t Change other settings gt Energy efficient settings Page 42 for more information Built in energy efficient settings e Low standby power consumption The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant standby functionality e Dedicated power switch Completely cut off power to the TV with the dedicated power switch located on the bottom of the set e Advanced power management The advanced power management of this TV ensures the most efficient use of its energy To view how your personalized TV settings affect the TV s relative power consumption press ft and select Setup gt Watch demos gt Active Control We continually focus on lowering the environmental impact of our innovative consumer products We aim our efforts towards making environmental improvements during manufacturing including reduction of harmful substances promoting energy efficient use end of life instructions and product recycling EUROPEAN UNION ECOLABEL Award to goods or services which meet the environmental requirements of the EU eco labelling scheme NL 22 001 Thanks to our environmental efforts this TV is awarded the European Ecolabel Find detailed information on standby energy consumption warranty policy spare parts and recycling of this TV at the Philips website for your country at www philips com
84. tall all available TV channels Note If you are prompted to enter a code enter 8888 1 Press fft 2 Select Setup gt Search for channels then press OK 3 Follow the on screen instructions to complete the channel installation 4 Once complete select Finish then press OK Tip Press LL to see the channel list Notes e During installation leave Settings unchanged unless your digital provider provides you with the specific values to enter EN 36 e When digital TV channels are found the list of installed channels may display empty channel numbers You can rename reorder or uninstall these channels Access DVB C or DVB T channels If you have installed both DVB C and DVB T channels you have to switch to the respective network to watch channels on that network 1 While watching TV press fft 2 Select Setup gt Channel settings 3 Select Channel installation gt Antenna or Cable DVB 4 Select one of the following settings e Antenna DVB T Access free to air antenna or digital DVB T channels Cable Access cable or digital DVB C channels 3 Press OK to confirm your choice t Press D to exit The TV switches to the selected channel list n Install analog channels This section describes how to search and store analog TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct If you are prompted to enter a c
85. ted device Also activates a selection or accesses the menu of the device EN 59 English e IM Previous PI Next Searches backwards and forwards on the connected device e Numeric buttons When EasyLink is enabled selects a title chapter or track e Options Displays the menu of the connected device When f is pressed the TV menu is displayed e Standby Press to enable one touch standby This switches the TV and the connected device to standby Other EasyLink buttons are available via On Screen Remote Control OSRC To access the OSRC 1 While watching a connected device press Bg 2 Select Show remote control then press OK 3 Use the Navigation buttons and OK to select and use an on screen button 4 Press D to exit Configure TV speakers You usually connect the TV to a HDMI CEC compliant device such as a HTS using both a HDMI cable for video and a digital audio cable for audio You can output TV audio through the HDMI cable solely provided both the TV and device are HDMI ARC compliant see Connect the TV Use Philips EasyLink Use HDMI ARC Page 60 Configure TV speakers 1 Press fft 2 Select Setup gt TV settings gt EasyLink gt TV speakers EN 60 3 Select one of the following options then press OK e Off Turn off TV speakers e _ On Turn on TV speakers e EasyLink TV audio continues to be streamed through the TV speaker
86. u can still download the video until the rental period expires Start watching To start watching a downloaded video press ft select Net TV gt Video stores and press OK With your log in enter the online store where you rented the video and select the video from the list of downloaded videos Select the video and press OK to play Online TV Some digital broadcasters offer an Online TV service With Online TV you can watch a program which you had missed Access the broadcasters Online TV page to see what programs are available What you need To access an Online TV service you need a high speed Internet connection to the TV Read Setup the TV gt Setup network Page 38 Open Online TV from Net TV To open an Online TV service from Net TV press fft select Browse Net TV and press OK In the Net TV services look for the icon of the TV channel that broadcasts the programme you want Select the service and press OK EN 25 English Open Online TV on a channel To open the Online TV service of a TV channel directly press the Red key If this service is available the TV will open the page of the broadcaster The availability of Online TV services varies by country EN 26 3 Use more of your TV Use teletext e Language Switches to a different language group to display a language correctly when that language uses a different character set 3 Press to exit the options menu S
87. uch any part of the TV power cord or aerial cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e o avoid deformations and color fading wipe off water drops as soon as possible e Avod stationary images as much as possible Stationary images are images that remain onscreen for extended periods of time Stationary images include onscreen menus black bars time displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage EN English End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused 4Y ae When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and ele
88. which you have missed You can watch the program at a time which suits you Video stores With Net TV you can rent your favorite movie from an online video rental store New services New services are added regularly Access the Net TV pages regularly to discover new services Notes e Net TV services vary in each country e With Net TV you can link up to the Internet or view any website However some websites are not tailored to be viewed on a TV screen and certain plug ins for example to view pages or videos are not available on your TV EN 22 e The number of services available on Net TV can change The functionality of services can change as well These changes are updated automatically You can view the latest services added or changed in the New category e Net TV displays one page at a time and in full screen e You cannot download and save files or install plug ins on this TV What you need To enjoy Net TV connect the TV to a router with a high speed connection to the Internet Read more at Setup the TV gt Setup network Page 38 Once connected press ftt select Browse Net TV to start the Net TV on screen setup Read more at Use your TV gt Enjoy Net TV gt First Use Page 23 Internet AM Router First use Registration benefits By registering with Philips you can enjoy exclusive benefits and receive updates on product information Parental control benefits W

Philips 37PFL7605H 37" Full HD Silver

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 37PFL7605H 37&quot; Full HD Silver

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 37PFL7605H 37" Full HD Silver