Tripp Lite B030-002-R KVM switch
Contents
1. b key Option 2 Select a specific PC by pressing and releasing the Scroll Lock key twice then pressing the 1 key to connect to port 1 or the 2 key to connect to port 2 Note To connect to the ports you must use the number keys located above the letter keys on the keyboard Do not use the number keys grouped together on the numeric keypad located on the right side of the keyboard 2 Auto Scan Mode Auto Scan automatically switches between PCs at regular 10 second intervals To invoke the Auto Scan Mode press and release the Scroll Lock key twice then press and release the 0 key Scanning continues until the spacebar is pressed to exit the Auto Scan Mode The port that was active when the spacebar was pressed remains active Note While Auto Scan Mode is in effect none of the other keyboard keys will function The Auto Scan Mode must be exited in order to use the console for anything else Specifications Troubleshooting If you are experiencing problems first make sure that there are no cable problems Check all cable connections B030 002 R CPU Ports 2 Port Selection Hotkeys Connectors CPU 2 x 6 foot long built in cable kits each with 2 x PS 2 and 1 x HD 15 Console 2 x PS 2 and 1 x HD 15 LEDs 2 Selected Port Emulation Keyboard PS 2 Mouse PS 2 Scan Interval 10 seconds Operating Temperature 32 F to 104 F Storage Temperature 4 F to 12. 40 F Humidity 0 80 RH Noncondensing Housing Plastic Problem Cause Mouse Not Mouse needs Responding to be reset Switch needs to be reset Wrong type of mouse or adapter Unsupported or incorrect mouse driver Video Resolution and or Problems Bandwidth set too high Solution Unplug the mouse from the Switch then plug it back in Turn off the PCs Wait 5 seconds then turn the PCs on The switch will only work with a PS 2 mouse A serial mouse cannot be converted to a PS 2 mouse by using a serial to PS 2 adapter One exception is a combo mouse which is specifi cally designed for both applica tions In this case ensure that the mouse is set up for PS 2 mode and is being used with the adapter originally provided Each PC needs to be using the mouse driver correlating to the mouse connected to the console port Some newer mice with extra buttons and wheels have unique drivers that may not be supported Try a regular mouse with a generic mouse driver like the one that comes with the operating system The Switch supports VGA SVGA Multisync and XGA interlaced monitors with resolutions of up to 2048 x 1536 Hz Troubleshooting Problem Cause Solution Video A power source Move the device that is Problems such as a power creating the electromagnetic panel or poorly interference or move the KVM insulated device is switch and or its cables too close to th
3. User s Manual 2 Port KVM Switch with Built In Cables PS 2 Type TRIPP LITE Model BO30 002 R Espanol 10 Fran ais 21 NOTE Follow these installation and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices Copyright 2004 Tripp Lite All rights reserved All trademarks are the property of their respective owners Technical specifications are subject to change without notice Tripp Lite World Headquarters 1111 W 35th Street Chicago IL 60609 USA 773 869 1234 www tripplite com Features All in one design features two built in 6 foot long cable kits one for each port Compact design Works with all operating systems PS 2 USB and SUN compatible Easy to install no software required simple plug and play operation Easy to operate computer selection via convenient hotkeys Auto scan function to monitor computer operation LED display for easy status monitoring Hot pluggable add or remove computers without powering down the switch Caps Lock Num Lock and Scroll Lock states are saved and restored when switching Keyboard and mouse emulation for error free computer booting Supports Microsoft IntelliMouse and the scrolling wheel on most mice Superior video quality up to 2048 x 1536 DDC DDC2 or DDC2B Self powered for any location Saves time space power and equipment costs When used with optional adapter sold sep
4. arately System Requirements Console A VGA SVGA or Multisyne monitor capable of the highest resolution that you will be using on any computer in the installation e APS 2 style keyboard e A PS 2 style mouse Computers The following equipment must be installed on each computer that is to be connected to the system e A VGA SVGA or Multisync port APS 2 style keyboard port or USB APS 2 style mouse port or USB When used with optional B015 000 PS 2 to USB adapter Components Console Keyboard Port PS 2 MiniDIN6 female Console VGA Monitor Port HD 15 female Console Mouse Port PS 2 MiniDIN6 female Status LEDs A continually lit LED identifies which PC is currently selected A continually lit LED also indicates that the switch is in the Manual Mode A flashing LED indicates that the switch is either in the Auto Scan Mode or the Hot Key Function is activated Cable Kits one for each computer connected Installation Before you begin make sure that the power to all PCs being connected to the KVM switch has been turned off NOTE To prevent damage to your installation due to ground potential difference make sure that all devices on the installation are properly grounded Connecting the Console 1 With all computers turned off connect the cable from your VGA monitor to the female VGA port on the front panel of the KVM switch 2 Connect your PS 2 keyboard and mouse d
5. e KVM switch or its cables Keyboard Not Keyboard needs Unplug the keyboard from the Responding to be reset Switch then plug it back in Switch needs Turn off the PCs Wait 5 to be reset seconds then turn the PCs on Switch is in Auto Press the Spacebar to exit Scan Mode Auto Scan mode Switched between Shut down the PC and reboot PCs during boot up without switching between PCs procedure Some notebook computers notably the IBM Thinkpad and Toshiba Tecra have trouble working with a switch when their mouse and keyboard ports are used simultaneously To avoid this problem only connect the mouse port or the keyboard port to the switch If you connect the mouse port you will need to use the notebook s keyboard when the notebook is the active computer These switches are designed to work with PS 2 keyboards Older XT 84 key and AT keyboards will not work FCC Radio TV Interference Notice Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installa tion This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause inter ference to radio communications However there is no guarantee that interference wi
6. ial Authorization RMA number from TRIPP LITE or an authorized TRIPP LITE service center Products must be returned to TRIPP LITE or an author ized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase This warranty does not apply to equipment which has been dam aged by accident negligence or misapplication or has been altered or modified in any way EXCEPT AS PROVIDED HEREIN TRIPP LITE MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE Some states do not permit limitation or exclusion of implied warranties therefore the aforesaid limitation s or exclusion s may not apply to the purchaser EXCEPT AS PROVIDED ABOVE IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT EVEN IF ADVISED OF THE POS SIBILITY OF SUCH DAMAGE Specifically TRIPP LITE is not liable for any costs such as lost profits or revenue loss of equipment loss of use of equipment loss of software loss of data costs of substitutes claims by third parties or otherwise TRIPP LITE has a policy of continuous improvement Specifications are subject to change without notice
7. irectly into the PS 2 keyboard and mouse ports on the front panel of the KVM switch Connecting a Computer The KVM switch has two cable kits each with a key board monitor and mouse connection permanently attached to the rear of the switch Use one kit for each computer The kits are labeled Port 1 and Port 2 both ports have a corresponding LED on the top of the switch that signifies when the port is selected When Connecting a PS 2 Computer 1 Connect the monitor connector blue with video icon of one cable kit to the VGA port on your computer 2 Connect the PS 2 mouse connector green with mouse icon of the same cable kit to the mouse port on your computer 3 Connect the PS 2 keyboard connector purple with keyboard icon of the same cable kit to the keyboard port on your computer When Connecting a USB Computer 1 Connect a USB to PS 2 adapter Tripp Lite Model B015 000 to the USB port on your computer This will convert the single USB port into a PS 2 keyboard port and PS 2 mouse port 2 Follow the instructions on the opposite page for When Connecting a PS 2 Computer SA89 Turn On Your Computers Operation Hot Key Port Selection Hot Key navigation lets you select the active PC or initiate an Auto Scan procedure directly from the keyboard 1 Selecting the Active Port Option 1 Toggle between PCs by pressing and releasing the Scroll Lock key twice then pressing the T or
8. ll not occur in a particular installation If this equipment does cause harmful inter ference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference using one or more of the following measures reorient or relocate the receiving antenna increase the separation between the equipment and the receiver connect the equip ment into an outlet on a circuit different from that which the receiver is connected consult the dealer or an experienced radio television technician for help The user must use shielded cables and connectors with this product Any changes or modifi cations to this product not expressly approved by the party responsible for compli ance could void the user s authority to operate the equipment This device complies with part 15 of the FCC rules Operation is subject to the following 2 conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation 3 YEAR LIMITED WARRANTY TRIPP LITE warrants its products to be free from defects in materials and workman ship for a period of three 3 years from the date of initial purchase TRIPP LITE s obligation under this warranty is limited to repairing or replacing at its sole option any such defective products To obtain service under this warranty you must obtain a Returned Mater
Download Pdf Manuals
Related Search