Manhattan SATA 300 PCI Express Card
Contents
1.2. Vista Click OK 8 Follow the Verifying Installation instructions to verify that the controller was installed correctly E 2 4MANHATTAN SPECIFICATIONS Standards and Certifications e FCC e CE e SATA 1 0 Ports e SATA internal type e ESATA extermal Hype e Transfer rate 3 0 Gbps General e Supports 2 independent SATA channels e 48 bit LBA for support of HDD larger than 137 GB e 2 Pin header for LED connection e Supports l lane 2 5 Gbps PCI Express e Hotplug capability e Independent link transport and data FIFO e Independent command fetch scatter gather and command execution e Supports legacy command queuing LCG e Supports native command queuing NCQ KA 2 4MANHATTAN e Supports non zero offsets NCQ e Supports outoForder data delivery NCQ e Supports FlS based switching with port multipliers e 31 commands and scatter gather tables per port System Requirements e Windows 2000 XP 2003 Vista e Available PCI Express Card slot e CDROM drive Package Contents e SATA 300 PCI Express Card e User manual and driver CD 2 4MANHATTAN 2 MANHATTAN aA MANHATTAN BRINGING COMPUTERS LIFE MANHATTAN offers a complete line of PC Components Peripherals Cables and Accessories Ask your local computer dealer for more information or visit us online at www manhattan products com Copyright MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners
3. ATA port to the SATA device s Turn the power on 2 During OS boot up Found New Hardware Wizard will display Click Next 3 Select Install trom a list or specific location Advanced and click Next Make sure the driver CD is in your CD ROM DVD 4 Select Search for the best driver in these locations and check Include this location in the search Uncheck the other boxes 5 Enter EN if your CDROM DVD is EN then click Browse 4 MANHATTAN 6 Specify a location Example ESATA Express_2Port Sil3132 VWVinXP_2000_2003 Click Open then OK 7 When the wizard indicates that it found a driver for the device click Next 8 If the Hardware Installation prompt appears click Continue Anyway 9 The wizard will now copy the required files to the system and start the driver After starting the driver the wizard will display a completion prompt Click Finish to exit the wizard Veritying Installation For Windows 2000 XP Right click on the My Computer icon select Properties lettclick on the Hardware tab then click Device Manager 2 Double click on SCSI and RAID Controllers If there is no yellow or 2 in front of Silicon Image Sil 3132 SATALink Controller the driver is started correctly _ To view information about the devices attached to the controller use the SilCtg Utility and click on the device trom the list For Windows Vista 1 Double click
4. SATA 300 PCI EXPRESS CARD USER MANUAL MODEL 150040 2 MANHATTAN MAN 150040 UM 1 106 03 Thank you for purchasing the MANHATTAN SATA 300 PCI Express Card Model 150040 With the following features this card allows you to easily upgrade desktop computers with two SATA 300 channels to access external and internal SATA and eSATA storage devices e Fully compliant with SATA 1 0 e Supports llane 2 5 Gbps PCI Express and SATA transfer rate of 3 0 Gbps e Native Command Queuing NCQ and legacy Command Queuing LCQ support maximizes drive efficiency and reduces latency e Supports FlS based switching with port multipliers e 3 commands and scatter gather tables per port e Enables Independent Link Transport Data FIFO Command Fetch Scatter Gather and Command Execution e Drivers for Windows 2000 XP Server 2003 Vista 4 MANHATTAN SOFTWARE INSTALLATION Windows 2000 XP Server 2003 Fresh Installation Follow the instructions in this section if you re performing a new installation of Windows 2000 XP or Server 2003 and you wish to boot from a device attached to the SATA port NOTE With Windows 2000 you must first edit the txtsetup oem file on the driver installation disk and delete the line trom the Contig Si3132 section that reads value Parameters Pnplntertace 5 REG_DWORD 1 1 Turn off power to the system Insert the SATA 300 PCI Express Card into an available PCI slot Connect SATA cable s from the SATA port t
5. o the SATA device s Turn the power on 2 Insert your Windows 2000 XP or Server 2003 CD into the CD ROM DVD drive or the 2000 boot diskette 1 in the floppy drive if your system cannot boot from the CD 3 Press F for third party SCSI or driver installation at the beginning of text mode installation Press S when the setup asks if you want to specify an additional device and insert the driver CD Press Enter and select Silicon Image Sil 3132 SATALink Controller A Press Enter again when prompted to continue with text mode setup O Follow the setup instructions to select your choice for partition and tile system 6 After setup examines your disks it will copy files from the CD to the hard drive selected above and restart the system After restart the setup process will resume to finish the installation 4 MANHATTAN 7 Once the operating system installation is completed you can follow the Verifying Installation instructions to confirm that the controller was installed correctly Windows Vista Fresh Installation Follow the instructions in this section if you are performing a new installation of Windows Vista and you wish to boot trom a device attached to the SATA port 1 Turn off power to the system Insert the SATA 300 PCI Express Card into an available PCI slot Connect SATA cable s trom the SATA port to the SATA device s Turn the power on 2 Insert your Windows Vista DVD into the DVD ROM drive 3 When Vis
6. on My Computer select Control Panel and click on SCSI Adapters Silicon OO a 4 MANHATTAN Image Sil 3132 SATALink Controller should display under the Device and Driver tab 2 To view information about the devices attached to the controller use the SilCtg utility and click on the device from the list Updating a New Driver For Windows 2000 XP or Server 2003 1 Right click on My Computer and select Properties Under System Properties click on the Hardware tab then on Device Manager Click SCSI and RAID Controllers rightclick Silicon Image Sil 3132 SATALink Controller then select Properties from the context menu 2 Click Driver then Update Driver Select Search for a suitable driver for my device Recommended Insert the driver CD in your CD ROM DVD drive Click Next to complete the driver installation 3 The system will go through the enumeration process and install the driver Click Yes to reboot 4 Follow the Verifying Installation instructions to confirm that the controller was installed correctly For Windows Vista 1 Click Start 2 Under Settings click Control Panel 3 Select SCSI Adapters trom the Control Panel 4 MANHATTAN A Select the Drivers tab and click Ada 5 Click Have Disk 6 Insert the driver CD in your CD ROM DVD drive and press Enter 7 Specify a location Example EXSATA Express_2Port Sil3132 then select the folder for
7. ta starts trom the DVD change the displayed language and keyboard preterences as desired and click Next Then click Install Now on the subsequent screen 4 Enter your product key and click Next 5 Select accept the license terms and click Next 6 Select Custom advanced 7 Click the Load Driver icon In the Load Driver prompt window that displays click OK 8 When the Select the driver to be installed screen displays insert the driver CD included with the SATA 300 PCI Express Card Select Silicon Image Sil 3132 SATALink Controller and click Next 4 MANHATTAN 9 The drive installed in Step 1 should be displayed Click Drive options advanced 10 Ensure that the unallocated space of the drive installed in Step 1 is highlighted then click New From the size box that appears specity the size of the partition to be created to contain the Vista OS installation then click Apply 11 Ensure that the partition created in the previous step is selected and click Next 12 Follow the onscreen prompts to complete the Vista installation Once the operating system installation is complete you can follow the Veritying Installation instructions to contirm that the controller was installed correctly Adding the Card to an Existing Windows 2000 XP Server 2003 or Vista Installation 1 Turn off power to the system Insert the SATA 300 PCI Express Card into an available PCI slot Connect SATA cable s from the S
Download Pdf Manuals
Related Search