dreamGEAR DGUN-946 docking speaker
Contents
1. iSound The New Sound HARMONY Instruction Manual i Sound Harmony Instructions The i Sound Harmony 2 1 Speakers are designed to provide you with a sound experience like nothing you have heard before Utilizing flat speaker technology the Harmony 2 1 Speakers are able to create full size speaker sound quality in a wafer thin design Box Contents 2 Flat Speakers 1 Subwoofer 2 Speaker Connection Cables iPods Stand with multiple iPode brackets i Sound 2X Portable Speaker System i Sound Harmony Set Up 1 Remove the speakers and subwoofer from the packaging 2 Connect the speakers to the subwoofer by plugging in the white and red connection cables to the rear of the subwoofer Make sure to connect the red cable to the red input on both the subwoofer and the speaker Follow the same procedure for the white connection cable 3 Locate the power plug on the back of the subwoofer and plug it in to any standard wall outlet 4 When using the Harmony Speakers with iPode you can use the included iPods stand for displaying your iPode The iPode stand features different brackets to fit the iPode model you are using 5 To connect an iPode or any other audio device that features a standard headphone output simply locate the audio out cable on the back of the Harmony subwoofer and connect it to your audio device of choice 6 Power on the Harmony Speaker by pressing the p2. output audio devices other than iPods may not fit in the 2X iPode bracket FOR TECHNICAL SUPPORT PLEASE CONTACT 1 877 999 DREAM or visit us on the web www dreamgear net www isoundusa com Cox Trademark of New Transducers Limited agi famiEArR PO Box 478 Torrance CA 90508
3. ower button located on the back of the subwoofer to the on position 7 Power on your audio device and you are ready to experience a new level in sound quality 8 Volume and bass settings can be adjusted using the volume and bass controls located on the side of the Harmony subwoofer Make sure the volume on your audio device is turned up e The New Sound i Sound 2X Instructions 1 Open the battery compartment located on the back of the speaker and insert 4 AAA batteries 2 The i Sound 2X Speakers feature brackets for different models of iPode Locate the bracket that matches your iPode model and connect to the front bottom of the 2X speakers by simply pressing it into the 2 holes located at the front bottom of the 2X Speaker system 3 Move the power switch located on the top of the speaker to the on position The LED will confirm the speaker is powered on 4 Unwind the audio cable located around the 2X speaker 5 With your iPode in place simply connect the audio cable from the 2X speaker to your iPode headphone jack 6 The volume is controlled by adjusting the volume on your iPode 7 The i Sound 2X Speakers are also compatible with any other audio device that features a standard headphone jack output 8 For connecting other audio devices follow the same procedures for connecting an iPods Note Although the 2X Speaker System is designed to work with all audio devices with a standard headphone jack
Download Pdf Manuals
Related Search