TEAC DVW/D11A/KIT
Contents
1. esee 28 Appendix E Technical Support and Warranty ee 29 Limited Warranty aaa iia nee ac eec esq a epe BR Reip 29 iv TEAC DVD Duplicator User s Manual List of Figures Figure 1 DVD Duplicator Unit Package Contents 0 00 0 0c eee eese 2 Figure 2 Front Panel of the DVD Duplicator Unit 0 000000 3 Figure 3 LCD Control Panel Js ere og ee e p DR REP ERUPPERAA 3 Figure 4 Rear Panel of the DVD Duplicator Unit 0 000 eee eee 5 Figure 5 Copy Function on LCD Panel 0 00 c cece eee eee 7 Figure 6 How to Handle Compact Discs DVD R and DVD RW 26 Figure 7 Ejecting the Disc Tray cess adie dace be cae A sane chee UNE ah aah 27 TEAC DVD Duplicator User s Manual v vi TEAC DVD Duplicator User s Manual Chapter 1 Introduction Thank you for purchasing a TEAC DVD Duplicator Note Q TEAC 1x1 DVD Duplicators are available in various models with or with out internal hard disk drives Please refer to Specifications on page 28 for detailed information on the model you purchased O This document the TEAC 1x1 DVD Duplicator User s Manual is intended for DVD Duplicator models DVW D11 and DVW D11H Operational instructions for both models are essentially the same The primary differ ence between models is that the DVW D11H features an internal hard disk drive which you can use as an alternative source drive The TEAC DVD Du2. The ISRC amp MCN function enables or disables ISRC and MCN format support The default setting is OFF TEAC DVD Duplicator User s Manual 21 12 13 CD Text 12 13 CD Text The CD Text function enables or disables the copying of CD Text discs The default setting is OFF 12 14 Switch USB Mode The Switch USB Mode function is not applicable to TEAC DVD Duplicators 22 TEAC DVD Duplicator User s Manual Appendix A List of Functions 1 Copy 2 Test 3 Test amp Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Select Source 9 Image available only on DVW D11H 9 1 Load 9 2 Delete Image 9 3 Image Info 9 4 Compare Image 9 5 Select Image 9 6 Image Src Drive 93 Image Format Info 10 Edit Track for CD only 10 1 CD to CD Edit 10 2 CD to HDD available only on DVW D11H 10 3 Play Audio Track 10 4 Close Session 11 Setup 11 1 Language Default is English 11 2 CD Burn Speed Default is Maximum 11 3 DVD Burn Speed Default is Maximum 114 Read Speed Default is Maximum 11 5 Auto Start Drive Default is Off 11 6 Startup Menu Default is Copy 11 7 Auto Verify Default is Off 11 8 Auto Compare Default is Off 11 9 Auto Prescan Default is Off 11 10 Eject Disc Default is Eject Good Only 11 11 Burn on the Fly Default is On 11 12 Burn Mode Default is DAO 11 13 Display Time Default Off 11 14 Button Sound Default is On 11 15 Device Info 11 16 System Info 11 17 Quick Erase 11
3. drive 18 TEAC DVD Duplicator User s Manual 11 12 Burn Mode 11 12 Burn Mode The Burn Mode setting enables you to select from two writing methods for CD R media C Disc At Once DAO Q Track At Once TAO DAO is the default setting 11 13 Display Time The Display Time function displays the total time of each copy operation The default setting is OFF 11 14 Button Sound The Button Sound setting turns the button sound on or off The default setting is ON 11 15 Device Info The Device Info function displays information for both the source and target drives 11 16 System Info The System Info function displays information for the interface board 11 17 Quick Erase The Quick Erase function performs a Quick Erase on DVD RW discs 11 18 Full Erase The Full Erase function performs a Full Erase on DVD RW discs This function takes longer than the Quick Erase 12 Advanced Setup Adv Setup The Advanced Setup functions enable you to modify the system configuration You should make changes only after you become completely familiar with the functions in this menu To enter Advanced Setup mode press the ESC button for two 2 seconds TEAC DVD Duplicator User s Manual 19 12 1 UnderRun Protect 12 1 UnderRun Protect The UnderRun Protect setting turns Buffer UnderRun Protection on or off The default setting is ON 12 2 Overburn The Overburn setting turns the Overburn function in the target drive
4. that you keep track of the data that you load into each partition Once the data is loaded successfully remove the source disc from the DVD ROM drive Repeat Steps 1 through 8 to load additional image files from other DVDs to other partitions if desired At this point the selected partition is the same as the one you selected in Step 5 above If you want to copy from this partition skip to Step 12 If you want to copy an image file from another partition into which you have already loaded data continue with Step 10 Press the O buttons to select function 9 5 Select Image then press the ENT button to access the Select a Partition submenu The Select a Partition submenu also enables you to select a partition A B C etc from which you want to copy an image file TEAC DVD Duplicator User s Manual 11 12 13 14 15 16 Loading Data to and Copying from the Hard Disk Source Drive Press the O buttons to select the partition you wish to copy from then press the ENT button The data will be copied from the selected partition when you specify the hard disk drive as the source and execute the copy function as described in Steps 13 through 16 Press the ESC button twice to exit to the DVD Duplicator s main menu Press the O buttons to select function menu 8 Select Source then press the ENT button to access a list of available source drive options Press the Y butto
5. 18 Full Erase 12 Advanced Setup Adv Setup 12 1 UnderRun Protect Default is On 12 2 Overburn Default is Off 12 3 Read Error Skip Default is Off 124 Format HDD factory use only 12 5 Verify HDD factory use only 12 6 Burn in 12 7 Update Firmware 12 8 Compare Firmware 12 9 H W Diagnostic 12 10 Load Default 12 11 CD G Default is Off 12 12 ISRC amp MCN Default is Off 12 13 CD Text Default is Off 12 14 Switch USB Mode n a TEAC DVD Duplicator User s Manual 23 Appendix B LCD Messages This appendix explains the messages that may appear on the LCD panel Normal Conditions for both DVD Duplicator models Message Meaning Initialize SDRAM Initialize system memory Detect drives User Abort Detect the drives connected to the system Cancel a job during operation Analyzing Analyze the source disc Source Drive Not Ready Source drive is not ready to read Target Drive Not Ready Target drive is not ready to write Erasing disc The system is erasing the data on the disc Source Disc Not Ready Target Disc Not Ready Source disc is not ready to be read Target disc is not ready to be written into Fail to get Drive Info Drive information cannot be obtained Fail to get SRC Disc Info Information about a source disc cannot be obtained Save new config Fail The new configuration settings cannot be saved Load Default Config
6. a drive DVD ROM drive DVD Writer drive or hard disk drive as the source from which to copy You can select a hard disk drive only on those DVD Duplicator systems that feature a factory installed hard disk drive 14 TEAC DVD Duplicator User s Manual 9 Image 9 Image The Image menu which consists of seven functions 9 1 through 9 7 is valid only on 1x1 DVD Duplicator systems that feature a factory installed hard disk drive The Image menu includes Load Delete Image Image Info Compare Image Select Image Image Src Drive and Image Format Info functions The data loaded onto the hard disk drive is called an image file 9 1 Load The factory installed hard disk drive was partitioned and formatted at the factory An alphabetical letter identifies each partition Each partition is approximately 5GB in capacity The number of partitions depends on the capacity of the hard disk drive The Load function enables you to transfer data from the DVD ROM drive or any DVD Writer drive to the current partition of the hard disk drive Note P A stands for partition A You can load as many disc images as the number of partitions available on the hard disk drive 9 2 Delete Image Use the Delete Image function to delete an image stored in a particular partition 9 3 Image Info Use the Image Info function to display basic information for an image file stored in a particular partition 9 4 Compare Image Use the Compare Image function
7. discs only by their edges to avoid getting fingerprints on the surface Do not touch the disc s data surface unlabeled side Q Do not place discs in direct sunlight or in locations subject to high humidity high temperatures or dusty conditions A If it becomes necessary to clean a disc due to erratic operation visible dust or smudges gently wipe the surface of the disc from the center to the outside edge Do not use benzene alcohol thinner or other solvents wipe disc surface from handle discs center to outside edge by their edges GM Figure 6 How to Handle Compact Discs DVD R and DVD RW 26 TEAC DVD Duplicator User s Manual Loading and Ejecting Discs Loading and Ejecting Discs To load a disc into the source or a target drive first open the disc tray by pressing the Eject button on the front of the drive Place the disc on the disc tray with its label side facing up Then press the Eject button again to retract the disc tray back into the drive To eject a disc from the source or a target drive press the Eject button on the front of the drive to extend the disc tray Remove the disc from the disc tray and place it in its protective case Then press the Eject button again to retract the disc tray back into the drive Press the Eject button to extend and retract the disc tray Figure 7 Ejecting the Disc Tray TEAC DVD Duplicator User s Manual 27 Appendix D Specifications The fol
8. ides en eee oes sg tede ici 19 11 15 Device Info e eee 19 I EIN clon ro ma dl PERPE 19 11 17 Quick Erase vc e ue bee p aeg ex PN iaa 19 LEES Pull A s oan Acasa mas mus Ate dixi oi hada eate letale 19 12 Advanced Setup Adv Setup u samacesce os eee ee Pete v eq eec eoe e ie 19 12 UnderRun Protect eye E wet ue e E a e d a 20 12 2 OV SRO UI a b Tug uie eR 20 123 Read Error Skip uere Ree RR RR RR eX OR Ads 20 124 Format HDD o Pi ep Ir beoe eR Pto dp OH ba 20 12 5 Verify HDD acc ici vee ol pue e HP RERO eL RISE CPP TODO ERES 20 12 6 BUEDEID z ose b ee ode eee ehh eh se eb ET LER 21 127 Update Puma Wares iia een Ere Lese ee todo to eds 21 12 8 Compare Firmware da 21 129 H W Diagnostic pude adu a CEN dread 21 12 T0 Load Default Jd so edid ems ince e tec de tct o e ch 21 LQ CDAG se CETTE 21 IZZ ISRC MON ai iO AE 21 IIED ad a ond ok s edna dnd ats 22 12 14 Switch USB Mod 15x re AA 22 Appendix A List of Functions 0 cece cece cece cece en ceee 23 Appendix B LCD Messages c cece cece e hn 24 Normal Conditions for both DVD Duplicator models 00 0 eee eee 24 Normal Conditions for the model that features a hard disk drive 25 Audio Eding s 2 erbrLr RE Or EXE E TE FRE REST ERU ER NC eu ey 25 Appendix C About DVD R and DVD RW Discs ooooooo o 26 Had DISCS CERCHI 26 Loading and Byecting DISCS 2a ace ace diane et re ac eg acer 27 Appendix D Specifications
9. on or off The default setting is OFF 12 3 Read Error Skip The Read Error Skip setting controls error skipping during reading of the source disc If the setting is OFF and an error is detected the target drive stops and displays the read error message If the setting is ON no messages will be displayed if an error occurs The copy operation will be completed and the copy will include all errors detected during the process The default setting is OFF 12 4 Format HDD For factory use only please do NOT use this function Warning Do not run this function It will erase all data already loaded into disk partitions This function is reserved for factory use only The Format HDD option is valid only on DVD Duplicators that feature a factory installed hard disk drive The factory installed hard disk drive has already been partitioned and formatted and is ready for use 12 5 Verify HDD For factory use only please do NOT use this function Warning Do not run this function It will erase all data already loaded into disk partitions This function is reserved for factory use only The Verify HDD option is valid only on DVD Duplicators that feature a factory installed hard disk drive The factory installed hard disk drive has already been partitioned and formatted and is ready for use 20 TEAC DVD Duplicator User s Manual 12 6 Burn in 12 6 Burn in The Burn in function runs an emulate writer funct
10. ttbi arra per dade eget doped esp b d aee dede den 15 9 2 Delete Image eoe e RA e e eek eR a 15 ESSA TET UNE Oa yee hese RTT ERR CT 15 DA Compare Images io e acoso atus ee pg fupe Ped s od a ls 15 A TMA RPM 15 9 6 Image Sre Drive ina ao cial cia ane ed ce Reed 15 O27 mae FOLIA Infor sos etos er Quos e qa SOROR RD ERR eae oie 16 10 Edit Track for CD only 2cescce ese ee e eh ace 16 101 CDt CD Edit ipe ERR x ERE setae ates Mane SEE EG 16 10 2 CD to HDD i gat cee capa ve Ate ee tab opio prd EUN dap 16 103 Play Audio Track siria PET UE kA gh ame T OPEN RA 16 10 4 Close Session a SEED 17 TI Setup nxirios ic e eem REY CR REC ES HET RR CER ER HR RR UR 17 EIN Eet eea Teea ED 17 I CD B Speed oreraa eane eae pee tecto pape buco Re RU OEE DEENS 17 11 3 VI BUMS Peed lea ii etc NEE KOE 17 IT Read Speed ciere dao ei 17 VS Auto Start DIVE aseo eO ato EAE E E e m E SEE EAS 17 11 6 Startup Menu ede egere Dee E NER A E EEEE E E EEE 18 DI T Ato Verify qos keee Mice ior A tae motu 18 TEAC DVD Duplicator User s Manual iii Table of Contents 11 8 Auto COMPAL cec cts ch e Re Ope ey Shy eG neg ae halen guess UR CS 18 119 Auto PresCant 23s cicce aie aase E Raed ere ER en uh 18 TT TO Eject DISC oeii 6t Ren ERRORES Eo bete ne A b eb VEI TEE 18 11 11 Burn onthe Fly isset rr e IRURE 18 PP AD Burn Mode yee eect sce wade hd Ry Cere qp ete bee tpa aped ee ba 19 1113 Display Time 2a RE e ERR FER OP eb CREE EE Gee Ro 19 UL TA Button Sound
11. 1x1 DVD Duplicator User s Manual DVW D11 DVW D11H TEAC Safety Precautions TEAC DVD Duplicator systems are high precision electronic devices Do not use them in any manner other than as specified in this manual Please read this manual in its entirety before you begin the installation procedure Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure To prevent fire or shock do not expose the unit to moisture or rain To prevent electrical shock do not attempt to disassemble the DVD Duplicator system Refer servicing to authorized personnel TEAC DVD Duplicator drives utilize a laser beam that can be harmful to your eyes Do not disassemble the cabinet or unit Do not attempt to look through the front panel or into the unit while the power is turned on A user who changes or modifies the unit or operating procedures specified herein without expressed written approval by the manufacturer will void user authority to operate the equipment Specifications and features subject to change without notice or obligation TEAC DVD Duplicator User s Manual Copyright and Trademark Information Copyright 2005 TEAC America Inc All rights reserved TEAC America Inc reserves the right to modify product offerings or specifications without advanced notice No part of this publication may be reproduced in any format without the expressed written permission
12. Authorization R A number must be clearly marked on the outside of each carton shipped to TEAC Return merchandise must be packed in original shipping containers or otherwise packed adequately to prevent damage in shipment You are responsible for all risk of damage to or loss of merchandise in transit to TEAC TEAC reserves the right to reject any merchandise that is not packaged and or marked as instructed herein You must pay any shipping charges if it is necessary to ship the product for service However if the necessary repairs are covered by the warranty we will pay the return shipping charges to any destination within the United States Whenever warranty service is required you must present a copy of the original dated sales receipt as proof of warranty coverage Please contact us at the addresses listed at the end of this warranty statement WHAT TEAC WILL PAY FOR We will pay all labor and material expenses for items covered by the warranty Payment of shipping charges is discussed in the next section of this warranty LIMITATION OF IMPLIED WARRANTIES ANY IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY ON UA RA un TEAC DVD Duplicator User s Manual 29 Limited Warranty EXCLUSION OF DAMAGES TEAC S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT AT TEAC S OPTION TEAC SHALL NOT BE LIAB
13. Do you want to load the default settings Src amp Tgt can t in the same channel During comparison the source and target discs cannot occupy the same channel Preparing The system is preparing to record Check Target Please Wait The system is checking the target device Audio Disc Can t compare The system cannot compare the audio disc Identical Read disc error Comparison results are identical During a comparison the disc could not be read Cannot read TOC The system cannot read the contents of the disc TOC not match Comparison results are not identical Source Disc Empty The source disc contains no data Target overflow The target disc capacity is insufficient to store new data Target Disc Not Empty Press a Key to Eject Good Disc The target disc still contains data Press any key to eject a disc after copying Copy suc cessful Press a key to Eject Fail Disc Press any key to eject a disc after copying Copy failed DVD RW does not Support the Func DVD RW does not support this function Hold ESC to exit Press ESC for one second to terminate the test All data will be lost erase All data on the disc will be lost Confirm erasure request Erase Finished The erasing of the data is complete No Erasable Disc in DVD RW The disc in the DVD RW drive is not rewritable 24 TEAC DVD Duplicator Use
14. Figure 2 illustrates the front panel of the DVD Duplicator unit LCD control panel O source drive disc tray O target drive disc tray power switch a LED status indicator Figure 2 Front Panel of the DVD Duplicator Unit LCD control panel Use the control panel buttons to navigate through the various functions viewed on the LCD display Figure 3 LCD Control Panel The DVD Duplicator control panel features an LCD display and four buttons These buttons are described in the following table Press the Up arrow button to scroll up functions or menus Press the Down arrow button to scroll down functions or menus TEAC DVD Duplicator User s Manual 3 Front Panel Press the ENT Enter button to execute a selected function Press the ESC Escape button to cancel a selected function or to return to the main menu Qo source drive disc tray Insert the disc to be copied into the source drive Use the disc tray to load a DVD into the drive You can open the tray by pressing the eject button if the tray fails to open you can use the emergency eject mechanism You can close the tray by pressing the eject button Notes Q TEAC strongly recommends that you do not push the tray in to close it Please press the eject button to eject or retr
15. LCD display is tested Once the initialization is complete the DVD Duplicator is ready for use The LCD initially displays the Copy function by default Figure 5 Copy Function on LCD Panel TEAC DVD Duplicator User s Manual 7 Basic Operation Basic Operation This section explains the basic operation of the DVD Duplicator Copying from the Optical DVD Source Drive Note The following instructions apply to both DVD Duplicator models 1 Place a source disc in the disc tray of the source drive Switch to function 1 Copy by pressing the button if necessary Place a blank DVD R disc into the target drive then press the ENT button to start copying When the copy operation is complete the DVD disc in the target drives will be ejected automatically a a Note With the default setting after a source disc has been successfully copied the DVD Duplicator automatically ejects the target DVD disc With the default setting ifthe copy operation fails the failed target DVD disc remains in the target drive To remove the failed DVD disc press the eject button on the target drive and retrieve the disc Press the eject button again to retract the disc tray You can change the default settings by using the Advanced Setup menu For more information see 12 Advanced Setup Adv Setup on page 19 TEAC DVD Duplicator User s Manual Loading Data to and Copying from the Hard Disk Source Dri
16. LE FOR DAMAGES BASED UPON INCONVENIENCE LOSS OF USE OF THE PRODUCT LOSS OF TIME INTERRUPTED OPERATION OR COMMERCIAL LOSS LOST PROFITS OR ANY OTHER DAMAGES WHETHER INCIDENTAL CONSEQUENTIAL PUNITIVE OR OTHERWISE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC RIGHTS AND MAY VARY FROM SOME OF THE RIGHTS PROVIDED BY LAW THESE RIGHTS MAY VARY FROM STATE TO STATE To contact the TEAC Service Center in the United States Tel 1 323 727 7694 or 1 323 727 7616 Fax 1 323 727 7606 E mail dssvce teac com TEAC America Inc 7733 Telegraph Road Montebello California 90640 30 TEAC DVD Duplicator User s Manual
17. act the tray Q The DVD Duplicator may include an internal hard disk drive as an alternate source drive Please refer to Specifications on page 28 for detailed information on the model that you purchased target drive disc tray Insert a blank disc into the target drive to make a copy of the source disc You can open the tray by pressing the eject button if the tray fails to open you can use the emergency eject mechanism You can close the tray by pressing the eject button Note TEAC strongly recommends that you do not push the tray in to close it Please press the eject button to eject or retract the tray O LED power indicator The LED power indicator will be continuously lit when the DVD Duplicator power is on power switch Use the power switch to turn the power to the DVD Duplicator unit on and off 4 TEAC DVD Duplicator User s Manual Rear Panel Rear Panel Figure 4 illustrates the rear panel of the DVD Duplicator unit TEN I AC IN power connector C o ETRE cooling fans e Pe O Figure 4 Rear Panel of the DVD Duplicator Unit 6 AC IN power connector Connect the included AC power cable to this input connector Plug the other end of the power cable into a three prong receptacle AC power outlet Caution Do not attempt to bypass the grounding plug Otherwise you risk electrical shock or damage to the unit Note To ensure proper operation use only the origi
18. and Advanced Setup Each function is explained below 1 Copy The Copy function enables you to copy data from a source DVD or a partition on the internal hard disk if your DVD Duplicator features a factory installed hard disk drive For more information refer to Basic Operation on page 8 To copy data to one of more DVD R discs follow the steps below 1 Switch to function 1 Copy by pressing the button Insert a source disc in the source drive and a blank DVD R disc into the target drive Note If your DVD Duplicator features a factory installed hard disk drive and you wish to copy data from a partition on the hard disk refer to Loading Data to and Copying from the Hard Disk Source Drive on page 9 3 Press the ENT button When the copy operation is complete the target drive ejects the copied disc 4 To make additional copies of the same source disc insert another blank DVD R disc into the target drive and press the ENT button Otherwise press ESC to return to the main menu Note You can use DVD RW discs that already contain data i e DVD RW discs that are not fully blank as target discs However the data stored on the DVD RW disc will be erased automatically before the new data is copied No special setting or procedure is required to erase the old data 2 Test The Test function simulates writing to the target disc Discs will remain blank after the test is complete This functi
19. at Info functions 3 Press the O buttons to select function 9 5 Select Image then press the ENT button to access the Select a Partition submenu The Select a Partition submenu enables you to select a partition A B C etc into which to load an image file on the hard disk drive When the unit is shipped from the factory the partitions on the hard disk drive contain no data The LCD will display a message similar to the following for each corresponding partition Select a Partition No image in A TEAC DVD Duplicator User s Manual 9 Loading Data to and Copying from the Hard Disk Source Drive 4 10 Press the buttons to select the desired partition letter The LCD will display partition A as the first option but you can select any partition letter at any time Press the ENT button to confirm the desired partition The LCD will display a message similar to the following Set Partition To A If you selected partition B the LCD will display the message Set Partition To B and so on Press the ESC button to return to function menu 9 Image Press the O buttons to select function 9 1 Load then press the ENT button to transfer data from the DVD to the specified parti tion on the hard disk drive The data image file on the DVD in the source drive will be copied onto the partition you selected in Step 5 Note To help you quickly locate your data in the future TEAC recommends
20. been verified successfully Verify Partition Header Verify the partition header Select HDD First First select a formatted hard disk Audio Editing Message Meaning Lost selected Tracks Abort and delete the selected tracks End edit disc and burn Finish the music disc editing and start to copy Continue edit next Disc Do you want to continue the music disc editing Target Overflow Re Select The disc capacity is insufficient to store the selected tracks Please select fewer tracks Close all disc s session Confirm the closing of disc sessions Can t edit HDD The hard disk cannot be edited as a source audio disc NO AUDIO track in this disc The source disc contains no audio tracks Insert next disc Insert the next audio disc Sessions were closed already Burn or Move to partition The disc sessions have already been closed Do you want to copy the data directly to disc or transfer the data to a hard disk partition Tgt overflow del last trk Ins empty disc Continue Disc capacity is insufficient to store the selected tracks Do you want to delete the last track Do you want to insert a blank disc and continue copying TEAC DVD Duplicator User s Manual 25 Appendix C About DVD R and DVD RW Discs This appendix explains how to handle load and eject DVD R and DVD RW discs Handling Discs Q Handle compact
21. em to be displayed as the first menu item when you turn on the DVD Duplicator COPY is the default 11 7 Auto Verify The Auto Verify setting controls auto verification of discs after a copy operation The default setting is OFF 11 8 Auto Compare The Auto Compare setting controls auto comparison of data between source and target discs after a copy operation The default setting is OFF 11 9 Auto Prescan The Auto Prescan setting controls automatic prescan of the source disc whenever a data audio disc is inserted in the source drive The default setting is OFF 11 10 Eject Disc The Eject Disc setting controls the ejection of discs by the target drive Three options are available Q Eject Good Only This option ejects the disc only if it has been successfully copied This is the default setting Q Eject All Disc This option ejects the disc regardless of whether the copy was successful or failed Q Do Not Eject With this option the disc remains in the target drive Manual ejection is required after every copy operation 11 11 Burn on the Fly The Burn on the Fly function enables you to control the copy operation When the setting is ON data is copied directly from the source DVD to the target DVD When the setting is OFF the DVD Duplicator first loads the data into a partition on the hard disk drive then copies the data to the target DVD This function is valid only on DVD Duplicators that feature an internal hard disk
22. es and enforceable only by the original purchaser This warranty is not valid outside the United States WHAT IS NOT COVERED BY THIS WARRANTY 1 Damage to or deterioration of the external cabinet Damage resulting from accident misuse abuse or neglect Damage resulting from failure to follow instructions contained in your user s manual Damage occurring during shipment of the product claims must be presented to the carrier Damage resulting from repair or attempted repair by anyone other than TEAC Service Department Damage resulting from modification or attempted modification of product not authorized by TEAC 7 Damage resulting from causes other than product defects including lack of technical skill competence or experience of the user 8 Damage to any unit that has been altered or on which the serial number has been defaced modified or removed 9 Damage or malfunction resulting from installation and cabling 10 For wireless configurations TEAC cannot be responsible for interference or operation in locations that restrict range 11 Damage to or from interconnected network equipment 12 Data integrity or loss of data HOW YOU CAN GET WARRANTY SERVICE Please contact the TEAC service department for a Return Authorization number before shipping unit s to TEAC Information required for R A request should include your name and or company name telephone number TEAC model version and serial number s Return
23. ion continuously The disc in the target drive is ejected and re inserted automatically between each test cycle This function can be prepared to run continuously or specified to run from 1 to 1000 times 12 7 Update Firmware The Update Firmware function updates the firmware of the interface board via CD or DVD disc The disc must contain the required data file and be inserted in the source drive The DVD Duplicator will locate the data and update its firmware automatically During the update do not turn off the power to the unit The update process is complete after the system resets automatically and displays the main menu 12 8 Compare Firmware The Compare Firmware function compares the current firmware version in the interface board to the update version in the disc 12 9 H W Diagnostic The H W Diagnostic function detects the devices connected to the interface board confirms functionality and displays information about the hardware on the LCD 12 10 Load Default The Load Default function resets all settings to factory default values It is recommended that you reset to the default values if the DVD Duplicator fails to function properly after you make changes to the original configuration 12 11 CD G The CD G function enables or disables CD G karaoke CD format support The default setting is OFF Note The CD G value must be set to OFF before you can use the Track Extraction features 12 12 ISRC amp MCN
24. lowing table lists the product specifications for the TEAC DVD Duplicator Model DVW D11 DVW D11H HDD Capacity None 80GB Weight 11 65 Ibs 13 15 Ibs Dimensions HxWxD 6 7 x 7 5 x 17 2 DVD Recorder TEAC 16X DVD RW Drive Interface IDE ATAPI Read Speed DVD 16x CD 48x Write Speed DVD 16x CD 48x Drive Buffer Size 2MB System Buffer Size 8MB Supported Discs DVD R DVD RW DVD DL DVD R DVD RW CD R and CD RW discs System Control Copy and Search Buttons System Display LCD Panel LED Indicators Write Method Auto Detect DAO TAO Operation Mode Copy Test Scan Compare Firmware Upgrade Via CD ROM DVD ROM Power Supply AC Input 100 240V 28 TEAC DVD Duplicator User s Manual Appendix E Technical Support and Warranty For technical support please contact the TEAC America Support Center TEAC America Inc USA Technical Support Telephone 323 727 4860 Fax 323 869 8751 Monday Friday 8 00 a m 5 00 pm PST http www teac com DSPD techsupport America htm E mail dspdtsgOteac com Limited Warranty This product is warranted by TEAC America Inc against defects in materials and workmanship LENGTH OF WARRANTY This warranty will be effective for both labor and parts and this warranty will be effective for one 1 year from the date of original purchase WHO MAY ENFORCE THE WARRANTY This warranty is valid only in the United Stat
25. nal AC power cable with your TEAC DVD Duplicator unit D cooling fan Ball bearing fan cools the DVD Duplicator TEAC DVD Duplicator User s Manual TEAC DVD Duplicator User s Manual Chapter 2 Using the DVD Duplicator This chapter explains how to set up the DVD Duplicator as well as basic operation and menu functions Note The following instructions are applicable to both DVD Duplicator models DVW D11 and DVW DIIH Operational instructions for both models are essentially the same The primary difference between models is that the DVW DIIH has an internal hard disk drive which you can use as an alternate source drive Setup 1 Carefully remove the DVD Duplicator unit AC power cord and user s manual from the shipping box Note Please keep the original box and packaging materials for use in the event of future storage or transportation of the unit Connect one end of the included power cable to the back of the DVD Duplicator Connect the other end of the power cable to a three prong receptacle AC outlet Caution Do not attempt to bypass the grounding plug Otherwise you risk damage to the unit and electrical shock Turn on the power to the DVD Duplicator by pressing the power button on the lower right hand side of the unit During initialization the DVD Duplicator performs a self test in which the unit s internal buffer is tested source and target drives are detected and the
26. ns to select the hard disk drive then press the ENT button The hard disk drive is now designated as the source drive Press the O button to switch to function 1 Copy The LCD will display a message similar to the following 1 Copy P A This message indicates that the data will be copied from the hard disk drive s partition A which was selected in Step 11 If you selected partition B the LCD will display the message 1 Copy P B and so on Place a blank DVD R disc into the target drive then press the ENT button to start copying TEAC DVD Duplicator User s Manual 11 Loading Data to and Copying from the Hard Disk Source Drive Note Q With the default setting after source data has been successfully copied to the target DVD disc the DVD Duplicator automatically ejects the disc Q With the default setting if the copy operation fails the failed target DVD disc remains in the target drive To remove the failed DVD disc press the eject button on the target drive and retrieve the disc Then press the eject button again to retract the disc tray You can change the default settings by using the Advanced Setup menu See 12 Advanced Setup Adv Setup on page 19 12 TEAC DVD Duplicator User s Manual Chapter 3 DVD Duplicator Functions The DVD Duplicator features 12 functions Copy Test Test amp Copy Verify Compare Prescan Disc Info Select Source Image Edit Track Setup
27. of TEAC America Inc TEAC is a trademark of TEAC Corporation All other trademarks and registered trademarks are the property of their respective owners Piracy Statement Copying audio video or software without the permission of the copyright holder is illegal TEAC accepts no responsibility for copyright infringement or misuse of this equipment It is the sole responsibility of the user to ensure that the legal copyrights of the copyright owners are respected About This Manual This TEAC DVD Duplicator User s Manual explains how to operate the TEAC DVD Duplicator It is divided into the following chapters Chapter 1 Introduction This chapter describes the shipping package contents and introduces the TEAC DVD Duplicator Chapter 2 Using the DVD Duplicator This chapter explains how to set up the DVD Duplicator It also details its basic copy operation Chapter 3 DVD Duplicator Functions This chapter explains all available functions of the DVD Duplicator Appendix A List of Functions Appendix A includes a complete list of all DVD Duplicator functions Appendix B LCD Messages Appendix B lists all messages that may appear on the LCD display Appendix C About DVD R and DVD RW Discs Appendix C contains information about handling loading and ejecting discs Appendix D Specifications Appendix D includes technical specifications for the TEAC DVD Duplicator units Appendix E Technical Support and Warranty Aappendix E e
28. on is recommended if you are using unsupported media This function enables the target drive to adjust its laser to the proper intensity TEAC DVD Duplicator User s Manual 13 3 Test amp Copy Note Unexpected termination or cancellation of a test will not affect a target DVD R disc The target DVD R disc will remain blank and available for use However DVD RW discs that contain data may be damaged and the data they contained may be rendered unrecoverable It may be necessary to re start the DVD Duplicator if the target drive hangs during a sudden termination 3 Test amp Copy The Test amp Copy function performs the test simulation and the copy process in one step The copy process is performed only if the simulation detects no problems If the simulation fails the copy process is cancelled 4 Verify The Verify function verifies that the target disc was written completely and with no errors 5 Compare The Compare function compares data on the source and target discs after the copy process is complete Note This function works only with data discs 6 Prescan The Prescan function is performed on the source drive This function scans the disc to determine the maximum data audio extraction speed 7 Disc Info The Disc Info function displays detailed information about the source disc including sessions tracks capacity etc 8 Select Source The Select Source function enables you to select
29. plicator is a stand alone disc to disc DVD Duplicator system that does not require connection to a computer It can duplicate a single master DVD to DVD media at up to 16X speeds resulting in an exact replica of a 4 7GB disc It can also duplicate discs to CD R media at up to 48X speeds The TEAC DVD Duplicator is designed to perform DVD copying quickly and accurately The DVD Duplicator automatically identifies source DVD formats and replicates the content as required The TEAC DVD Duplicator performs continuous copying with no waiting It is an ideal DVD Duplicator for the advanced user who requires speed and accuracy You can set up your TEAC DVD Duplicator very quickly and easily There is no need to install any software There is no need to attach any cables to your computer The TEAC DVD Duplicator functions entirely as a stand alone unit TEAC DVD Duplicator User s Manual DVD Duplicator Package Contents DVD Duplicator Package Contents Your TEAC DVD Duplicator package includes the following items see Figure 1 Q TEAC 1x1 DVD Duplicator unit Q AC power cable Q TEAC DVD Duplicator User s Manual this booklet Figure 1 DVD Duplicator Unit Package Contents Note If any of the items above is missing from your package upon purchase please contact your vendor immediately 2 TEAC DVD Duplicator User s Manual Front Panel Front Panel
30. r s Manual Normal Conditions for the model that features a hard disk drive Normal Conditions for the model that features a hard disk drive Message Meaning HDD not Format The hard disk has not been formatted Format HDD Do you want to format the hard disk All data will be lost format All data on the hard disk will be lost Confirm the format request Format HDD OK Formatting of the hard disk is complete Image load OK The image has been successfully loaded from DVD to the hard disk Image load Fail The image has not been loaded successfully from DVD to the hard disk HDD too small to handle The hard disk capacity is insufficient to store the data image image at least 5Gbytes is required No Valid HDD The system cannot locate a hard disk HDD too small The hard disk capacity is too small No Image in Partition xx There is no data image in the specified partition Image Exists Overwrite The current partition contains a data image Confirm the overwriting request Delete Image in Partition xx Confirm the request to delete the data image in the spec ified partition Partition Damage The partition is damaged Verify Disk Or Partition Do you want to verify the entire hard disk or only a parti tion Verify Hard Disk OK The hard disk has been verified successfully Verify the Hard Disk Fail The hard disk has not
31. reate a collection of songs and copy the collection to blank CD R CD RW discs Note CD R discs support up to 80 minutes of audio Therefore the number of tracks that can be copied onto a single disc depends on the length of each individual track 10 2 CD to HDD The CD to HDD function enables you to select one or more tracks from an audio CD ROM disc and copy them to a specific partition on the hard disk drive Note CD R discs support up to 80 minutes of audio Therefore the number of tracks that can be copied onto a single disc depends on the length of each individual track 10 3 Play Audio Track This function enables you to use the designated source drive as a music CD player If the DVD ROM drive does not feature a headphone jack change the source drive designation to the DVD RW drive using function 8 Select Source see page 14 You can connect standard multimedia speakers to the audio jack of the designated source drive The volume knob on the front of the drive controls the audio volume level The arrow buttons O O on the LCD panel enable you to skip to the next track forward or back 16 TEAC DVD Duplicator User s Manual 10 4 Close Session 10 4 Close Session This function finalizes your CD R disc Once the CD R disc is finalized no more audio can be added to that disc 11 Setup The Setup menu includes a list of options that enable you to change the original default configuration Various
32. settings are available under the Setup menu that control the operation of the DVD Duplicator However TEAC recommends that you use the original default settings for optimal operation 11 1 Language The DVD Duplicator LCD panel can display text in English and Spanish The Language function enables you to select the display language English is the default option 11 2 CD Burn Speed The CD Burn Speed setting controls the writing speed of the target drive when recording onto CD R CD RW media The default value is MAXIMUM which writes at the highest speed available on the target drive 11 3 DVD Burn Speed The DVD Burn Speed setting controls the writing speed of the target drive when recording onto DVD RW media The default value is MAXIMUM which writes at the highest speed available on the target drive On occasion using the maximum writing speed will cause copy failure due to poor quality DVD RW discs In this case TEAC recommends that you reduce the writing speed 11 4 Read Speed The Read Speed function enables you to set the reading speed of the target drive MAXIMUM is the default setting 11 5 Auto Start Drive The Auto Start Drive setting enables the DVD Duplicator to auto start the copy or test process as soon as a blank disc is inserted into the target drive The default setting is OFF TEAC DVD Duplicator User s Manual 17 11 6 Startup Menu 11 6 Startup Menu The Startup Menu setting enables you to select a menu it
33. to compare the contents of a source DVD ROM disc with the image file in the partition 9 5 Select Image The internal hard disk drive was partitioned and formatted at the factory An alphabetical letter identifies each partition Each partition is approximately 5GB in capacity The number of partitions depends on the capacity of the hard disk drive Use the Select Image function to select an image file that is stored in a specific partition on the hard disk drive 9 6 Image Src Drive Use the Image Src Drive function to select the DVD ROM drive or the DVD Writer drive as the source from which you can load data into a particular partition as an image file TEAC DVD Duplicator User s Manual 15 9 7 Image Format Info 9 7 Image Format Info The partitions on the hard disk drive can be configured to store a CD 1GB DVD 5GB or a Double Layer DL 10GB image The factory partitions the hard disc drive for DVD images at 5GB per partition Use the Image Format Info function to verify this setting 10 Edit Track for CD only The Edit Track functions enable you to create and copy a collection of songs from different audio discs Note The CD G value must be set to OFF before you can use the Track Extraction feature For more information refer to 12 Advanced Setup Adv Setup on page 19 10 1 CD to CD Edit The CD to CD Edit function enables you to select specific tracks from various audio discs combine them to c
34. ve Loading Data to and Copying from the Hard Disk Source Drive Note The following instructions apply only to the DVD Duplicator model that features a factory installed hard disk drive DVW D11H During initialization see Step 3 on page 7 the DVD Duplicator performs a self test to detect source drives The DVD ROM drive and hard disk drive will be detected as available source drives The DVD ROM drive is the default source drive The internal hard disk drive was formatted and partitioned at the factory Each partition occupies 5GB of hard disk space The number of partitions depends on the capacity of the hard disk drive Partitions are arranged alphabetically and initially contain no data A set of data loaded into a partition on the hard disk drive is called an image file To use the hard disk drive as the source drive you must first load an image file from a DVD onto a partition on the hard disk drive select the partition that contains the data you want to copy specify the hard disk drive as the source drive then execute the copy function 1 Insert a source DVD into the DVD ROM drive This disc DVD ROM or DVD contains the data that you wish to copy to the partition on the internal hard disk drive 2 Press the Q O buttons to select function menu 9 Image then press the ENT button The Image menu includes the Load Delete Image Image Info Compare Image Select Image Image Src Drive and ImageForm
35. xplains how to contact technical support at TEAC America Inc and provides Limited Warranty information ii TEAC DVD Duplicator User s Manual Table of Contents Safety Precautions a hashes diet eked b bad e eges i Copyright and Trademark Information ssseeee eee eee ii Piracy Statement Oia ii About This Manual ii ini il PA etae nac entere unn tole cadi celeste Ne fy et M Chapter 1 Introduction o oooooooncorcrcrororonrrnnoron s 1 DVD Duplicator Package Contents 0 0 0 cece cee eee 2 Front Panel i e e p RR A Ree es aw eR eeu s 3 Rear Panel Past a E ee br era 5 Chapter 2 Using the DVD Duplicator ccc ce eee eee ene 7 SED ica AA ie eos i Basic Operan onee aren ase na EE Eaa EEE o Ena EAE E 8 Copying from the Optical DVD Source Drive cute ssie ea 8 Loading Data to and Copying from the Hard Disk Source Drive 9 Chapter 3 DVD Duplicator Functions eee 13 MAC OD ose cess crs to ava ate arias ayes oss ce at ap at da pad ner asin nents nectar aw 13 DiM OSU id e Re ccs a ante odi aede ced 13 a E dei dena eesti cepa cle ahd 14 4 Very A ARDEN UE Ga dowd etd kad ENQNUNNDIEI NIE bere UE S Roe HR Ronin 14 COMPAS a NES ds da e UA adn pco 14 6 PreScan id a eb debe edes unas 14 7 Disce Info e eR SERERE REGE te ie qd p EE Y SERVE TR 14 5 Select Soure esses Pcie made Ace wa E RM UR Oe A hate en reas 14 OTIm age cesse ke RE E cR ee RR RES A RESET YE HQ RE RN 15 QP LOA n
Download Pdf Manuals
Related Search