Addonics ADPCICB2
Contents
1. Addonics PCI CardBus PCMCIA Controller Model ADPCICB2 Features e Provides 2 brackets to support low profile and regular size PCI in one card e Supports Type I Type II and Type III PC cards e Two independent PC Card socket compliant with PC Card standard 7 1 e PCI Bus Power Management Interface Specification 1 1 Compliant e Advanced Configuration and Power interface Specification 1 0 Compliant e PCI Local Bus Specification Rev 2 2 Compliant e PC 98 99 compliant e Compliant with the PCI Bus Interface Specification for PCI to CardBus bridges e Supports active Flash media and Smart Card adapters e Mix and match 5V 3 3V 16bit PC Cards and 3 3V CardBus Cards e Plug and Play in Windows 98SE Me 2000 and XP Package Contents e One Controller card e This quick user guide System Requirements e Available PCI Slot e Windows 98SE Me 2000 XP PCI CARDBUS PCMCIA Controller Hardware Installation Windows 98SE Me 2000 and XP 1 Make sure that the computer is turned off before installing the card 2 Remove the power cable from the computer then open the computer case 3 Find an available PCI slot on the computer s motherboard PCI slot is normally white in color 4 Insert the PCI CardBus PCMCIA Controller card in the PCI slot and secure the card by putting a screw on the bracket to hold the card in place 5 Close the computer case connect all the Cables back to the computer and2. start The computer 6 Windows will automatically load the Drivers for the card Software Installation Windows 98SE Me 2000 and XP gt The PCI CardBus PCMCIA Controller card is plug and play under the required Operating Systems gt Drivers are built in on the operating system Contact Information Addonics Technologies 2466 Kruse Drive San Jose CA 95131 Phone 408 433 3899 Fax 408 433 3898 Internet http www addonics com Technical Support Phone 408 433 3855 Email Techinfo addonics com
Download Pdf Manuals
Related Search