Topcom Butler 800
Contents
1. and polarity 3 Replace the battery cover Back view of hand set Cover oe A Rechargeable Batteries a Note The maximum standby time of the batteries is approx 100 h and the maximum talk time is 10 hours In the course of time the batteries will start to drain faster The batteries must be replaced 2 rechargeable batteries type AAA NiMH 8 Topcom Butler 800 Twin Topcom Butler 800 Twin 3 USING THE TELEPHONE 3 1 SETTING MENU LANGUAGE Select the language of choice by means of the up a and down v keys Press OK to validate I 1 Enter the menu by pressing OK g 2 Select HANDSET using the up a and down v keys 2 3 Press OK u 4 Select LANGUAGE using the up a and down v keys 5 Press OK 6 7 3 2 HANDSET ON OFF e Turn ON handset Press the key on the handset The handset will search the base e Turn OFF handset Press for 3 sec The display will go OFF 3 3 RECEIVING A CALL When the handset rings press to answer You are then connected to your correspondent If the hand set is on the base when the telephone rings you just need to pick up the hand set to answer the call if the option autoanswer is activated See 4 9 Automatic answer If you press q when the telephone rings you answer the call automatically and activates the handfree mode 3 4 MAKING AN EXTERNAL CALL Normal 1 Press f 2 Enter telephone number Block dialling 1 Dial your correspondents number 2 Pre2. OFF 1 Enter the menu by pressing OK Select HANDSET using the up a and down v keys Press OK Select AUTO ANSWER using the up a and down v keys Select ON for automatic answer or OFF Press OK oor ON 4 10 RESET It is possible to return the phone to the original default configuration This is the configuration which was installed when you first received the telephone To return to default settings 1 Enter the menu by pressing OK Select SETUP using the up a and down v keys Press OK Select DEFAULT using the up a and down v keys Press OK Enter the 4 digit PIN code default 0000 Press OK Press again OK to validate et Oe eS DEFAULT PARAMETERS ARE Low battery beeps ON Out of range warning beeps ON Key click ON Auto answer ON Internal melody 1 Internal volume 3 External melody 1 External volume 3 Ear volume 3 Phonebook Empty Call log list Empty Redial list Empty Pin code 0000 Dial mode DTMF Keypad lock OFF 16 Topcom Butler 800 Twin Topcom Butler 800 Twin WARNING Returning to default settings will delete all entries in the phonebook and call log The PIN code will also be reset to 0000 4 11 KEYPAD LOCK The keypad can be locked so that no settings can be changed or no telephone number can be dialed The o icon will appear on the screen when keypad is locked ENGLISH 4 11 1 Locking the keypad by Menu 1 Enter the menu by pressing OK Select HANDSET using the up a and down v key
3. OK the telephone number will be shown Note if the telephone number is longer then 12 digits press OK again to see the complete number 4 Press OK again to see the time and date when the call is received 5 Pressing OK again will give you the option to add this entry in the phonebook if it s not already stored e Press OK when ADD is shown on the display Enter or modify the name and press OK Enter or modify the telephonenumber and press OK Select the melody 1 3 which will be heard when this number is calling by means of the up down keys and press OK The entry will be stored in the phonebook 6 To call back a correspondent simply press the key when their telephone number or name are displayed ENGLISH If a caller is in the phonebook they are identified by their name in the list of calls Only when the network send the time date together with the telephone number On networks with caller id in DTMF no time and date will be displayed 3 11 2 Delete an entry or all entries in the call list You can delete each entry separately or all entries at ones e When scrolling through the calls press the mute key ajc short to delete this entry only DELETE appears on the screen the mute key ajc long 2 sec to delete all entries DELETE ALL appears on the screen e Press OK to delete current all entr y ies or m to cancel the delete operation 3 12 REDIAL MEMORY Your telephone keeps a list of the 5 la
4. and then B consecutively select A wait until the cursor moves on to the next character then press 2 twice To select a space press 1 To select a dash press 1 twice The keypad characters are as follows Key First Second Third Fourth Fifth press press press press press 1 space 1 2 A B C 2 3 D E F 3 4 G H l 4 5 J K L 5 6 M N O 6 7 P Q R S 7 8 T U V 8 9 W X Y Z 9 3 15 USING THE MENU A wide range of telephone functions are accessible through a user friendly menu 1 To enter the menu press OK 2 Scroll through the selections using the up a and down v keys the selections scroll in a loop you return to the first after the last 3 To validate a selection press OK 4 To return to the previous menu press m 12 Topcom Butler 800 Twin Topcom Butler 800 Twin 4 PERSONALISATION Note Every programmation is confirmed at the end by a double or single long beep A double beep confirms the validation of your choice A long beep signifies that the modification has not been taken into account ENGLISH 4 1 ADJUSTING THE RING VOLUME 4 1 1 Handset ringvolume External internal calls The handset ringvolume for internal or external calls can be set separately Enter the menu by pressing OK Select HANDSET using the up a and down v keys Press OK Select INT RING VOL or EXT RING VOL using the up a and down v keys Press OK Select the desired volume OFF or 1 to 3 Press OK to co
5. the base refer to the handset manual to find out how to register the handset The handset must be GAP compatible The icon p and the text NOT REG flashes on the display when the handset is not associated with the base When a handset is associated with a base it is attributed a handset number by the base It is this number that is displayed on the handset after the name and must be used for internal Calls Topcom Butler 800 Twin 19 Topcom Butler 800 Twin DECT GAP Profile only guarentees that basic calling functions will work correctly between different brands types There s a possibility that certain services like CLIP will not work correctly 6 2 REMOVING A HANDSET You can remove a handset with a base to allow another handset to be registered Enter the menu by pressing OK Select SETUP using the up a and down vw keys Press OK Select DEL HANDSET using the up a and down v keys Press OK Enter the 4 digit base PIN code Press OK Select the handset to be removed Press OK to validate Sane ay Sf 6 3 SETTING UP A HANDSET ON ANOTHER BASE If you want to use a Butler 800 handset with a base of another model The base must be GAP compatible 1 To put the base in registration mode refer to the base user manual 2 Carry out operations 3 to 10 from the paragraph 6 1 6 4 SELECTING A BASE The handsets can be registered up to 4 bases simultaneously To select a base Enter the menu by pressing OK Sele
6. 2s 3 11 CALLER IDENTIFICATION Caller identification is only available if you have subscribed to this service with your telephone operator When you receive an external call the callers number will appear on the display as the telephone rings If the network sends it or if the name of the caller is in the address book the caller is identified by his or her name The caller identity is replaced by the call duration after 15 seconds in communication It is still possible to display the caller s identity after this time by pressing OK key repeatedly for the name and number 3 11 1 List of calls Your telephone keeps a list in memory of the last 30 calls received This function is only available if your are subscribed to the caller ID information The correspondents that have called are identified by their telephone number or name in the same way as in caller identification The presence of new unanswered calls is indicated by the flashing M icon on the display To consult the list of calls 1 Press M If there are no calls in the list EMPTY will appear 2 Scroll through the calls using the up a or down v arrows The callers names will be shown if the name is send by the network or is stored in the phonebook When is shown this call is been aswered When amp is shown the call is unaswered If you are at the end of the list you will hear a beep tone 10 Topcom Butler 800 Twin Topcom Butler 800 Twin 3 If you press
7. TOPCOM Butler 800 Twin USER GUIDE V 1 8 CE Important To use Caller ID display caller this service has to be activated on your phone line Normally you need a separate subscription from your telephone company to activate this function If you don t have the Caller ID function on your phone line the incoming telephone numbers will NOT be shown on the display of your telephone This product is in compliance with the essential requirements and other relevant provisions of the R amp TTE directive 1999 5 EC The Declaration of conformity can be found on http www topcom net support cedeclarations php GB __ The features described in this manual are published with reservation to modifications 1 1 1 2 1 3 2 1 2 2 3 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 9 3 10 3 11 3 12 3 13 3 14 3 15 4 1 4 2 4 3 4 4 4 5 4 6 4 7 4 8 4 9 4 10 4 11 5 1 5 2 6 1 6 2 6 3 6 4 8 1 8 2 8 3 Description of telephone Handset and base Butler 800 Charger Butler 800 Display Telephone installation Connections Rechargable batteries Using the telephone Setting menu language Handset ON OFF Receiving a call Making an external call Making an internal call Hand free mode Internal call transfer Display of call duration Microphone mute Pause key Caller identification Redial memory Calling from the phonebook Using the alphanumerical keypad Using the menu Personalisation Adjusting the r
8. The base can support a maximum of 2 handsets If you already have 2 handsets and you wish to add another one or change one handset you must first delete a handset then associate the new handset ENGLISH To register any handset the base must be put into a special registration mode 1 Press and hold the paging key of the base for 6 seconds 2 The base will then emit a beeptone The base is now ready to register a new handset You have 90 seconds after pressing the button to register a new handset After putting the base into registration mode start the procedure on the new handset if your additional handset is a Butler 800 Enter the menu by pressing OK Select REGISTER using the up a and down v keys Press OK Select REG BASE using the up a and down v keys Enter a base number from 1 to 4 The flashing numbers are already in use Enter the Base PIN code 0000 by default Press OK The handset will start searching for the DECT base 0 If the handset has located the base it will display the base identification number validate the base registration by pressing OK or stop by pressing m If the handset does not locate the base it will return to the standby mode after a few seconds Try again by changing the base number and check that you are not in a environment where there is interference Move closer to the base ae ONO Oe 1 _ if your handset is another model After starting the registration procedure on
9. aking any modifications into account 4 6 CHANGING THE PIN CODE Certain functions are only available to users who know the PIN code By default this is PIN code 0000 To change the PIN code 1 Enter the menu by pressing OK 2 Select SETUP using the up a and down v keys 3 Press OK 4 Select PIN CODE using the up a and down v keys 5 Press OK 6 Enter the old 4 figure PIN code 7 Press OK 8 Enter the new 4 figure PIN code 9 Press OK 10 Enter the new PIN code a second time 11 Press OK to validate 4 7 SETTING THE DIALLING MODE There are two types of dialling mode e DTME Tone dialling the most common e Pulse dialling for older installations To change the dialling mode Enter the menu by pressing OK Select setup using the up and down w keys Press OK Select DIAL MODE using the up a and down v keys Press OK Select the dialling mode using the up a and down v keys Press OK to validate ee ae NS Topcom Butler 800 Twin 15 ENGLISH Topcom Butler 800 Twin 4 8 FLASH TIME DURATION Enter the menu by pressing OK Select SETUP using the up a and down v keys Press OK Select RECALL using the up a and down vw keys Choose RECALL 1 for short flash time 100ms or RECALL 2 for long flash time 250ms gie o Da 4 9 AUTOMATIC ANSWER When there is a incoming call and the handset in on the base the phone automatically takes the line when lifted This is the default setting but can be set
10. and down vw keys The list scrolls in alphabetical order Press OK when you find the name to modify Use the arc key to go back and enter the new name Press OK to validate 10 Enter the new telephone number 11 Press OK to validate Warning if you enter the Phonebook first with the mkey and modify a telephone number with the ackey the modification will be taken into account only for this call and will not be stored in the phonebook 5 1 3 Deleting an entry To delete an entry DARON 7 8 Enter the menu by pressing OK Select PHONE BOOK using the up a and down v keys Press OK Select DELETE ENTRY using the up a and down v keys Press OK Move through the list of names using the up a and down v keys the list scrolls in alphabetical order Press OK when you find the name you wish to delete CONFIRM appears press OK to confirm or to stop 5 2 SEARCHING A HANDSET FROM THE BASE When the paging button on the base is pressed all the handsets will ring This ringing will help you locate a lost handset By simply pressing one of the handset keys the ringing stops Topcom Butler 800 Twin Topcom Butler 800 Twin 6 MANAGING MULTIPLE HANDSETS 6 1 SETTING UP AN ADDITIONAL HANDSET You only need to register a 2nd handset in case your 2nd handset does not link with the base anymore or when you have bought a new one You can register new handsets on the base if these handsets support the DECT GAP protocol
11. anty period starts on the day the new unit is purchased The warranty on batteries is limited to 6 months after purchase Consumables or defects causing a negligible effect on operation or value of the equipment are not covered The warranty has to be proven by presentation of the original purchase receipt on which the date of purchase and the unit model are indicated 8 2 WARRANTY HANDLING A faulty unit needs to be returned to a Topcom service centre including a valid purchase note If the unit develops a fault during the warranty period Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units In case of replacement colour and model can be different from the original purchased unit The initial purchase date shall determine the start of the warranty period The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres 8 3 WARRANTY EXCLUSIONS Damage or defects caused by incorrect treatment or operation and damage resulting from use of non original parts or accessories not recommended by Topcom are not covered by the warranty Topcom cordless phones are designed to work with rechargeable batteries only The damage caused by the use of non rechargeable batteries is not c
12. ct REGISTER using the up a and down v keys Press OK Select SELECT BASE using the up a and down v keys Press OK Select a base or select AUTO using the up and down w keys Press OK eo oh When selecting the base the currect selected base in indicated by a blinking base number If you select Auto the handset will automatically search for another base when you are out of range 20 Topcom Butler 800 Twin Topcom Butler 800 Twin 7 TROUBLE SHOOTING No display Batteries uncharged ret costo ore the position of the batteries Recharge the batteries the batteries turned a Turn R E the handset Roos e cord badly con Check the telephone cord nected connection The line is occupied by Wait until the other handset another handset hangs up The icon p flashes Handset out of range Bring the handset closer to the base ENGLISH The base has no power Check the mains connec supply tion to the base _____eadonthevase nebase tered on the base the base or low Tone is good but there is The dialling mode is wrong Adjust the dialling mode no pulse tone communication Not possible to transfera The FLASH time is too Set the unit to Long Flash Telephone does not react Manipulation error Remove the batteries and fopressmgttekee pattombecn pace Topcom Butler 800 Twin 21 Topcom Butler 800 Twin 8 TOPCOM WARRANTY 8 1 WARRANTY PERIOD The Topcom units have a 24 month warranty period The warr
13. eration has an associated icon Icon Cc EXT INT M Na A q aa 9 4r Meaning You are online You are in external communication You are in internal communication New numbers in call list Indicate answered call Indicate unanswered call Hands free mode activated You are opening your address book You are in the menu rechargeable battery level indicator 1 segment weak 2 segments medium 3 segments full The antenna indicates the quality of reception The antenna flashes when the handset is not registered on the base Handset keypad locked Indicates that the displayed number is longer than the screen 12 digits Topcom Butler 800 Twin 1 3 1 Standby display In stanby mode the display shows the handset name and the handset number B800 HS1 2 TELEPHONE INSTALLATION 2 1 CONNECTIONS Bottom view of base Butler 800 Topcom Butler 800 Twin Topcom Butler 800 Twin ENGLISH Power cable z nd Telephone cord Topcom Butler 800 Twin Bottom view of CHARGER Butler 800 Ge Power cable 2 2 RECHARGABLE BATTERIES Before you use your butler 800 for the first time you must first make sure that the batteries are charged for 6 8 hours The telephone will not work optimally if not properly charged To change or insert a rechargeable battery 1 Slide the cover towards the bottom and then lift it up 2 Insert the batteries respecting the
14. he melody of your choice 1 to 3 using the up a and down v keys 7 Press OK to confirm or q to return to the previous menu 4 3 SPEAKER VOLUME DURING CALL During conversation press the up a or down v key to change the volume accordingly Note The handsfree volume is also adjust together with the receiver in the handset as above described 4 4 ACTIVATION DEACTIVATION OF BEEPS The handsets can emit beeptone when a key is pressed when the batteries are low or when the handset is out of range 4 4 1 Key pressed beeptone on off 1 Enter the menu by pressing OK Select HANDSET using the up a and down v keys Press OK Select BEEP using the up a and down v keys Press OK Select KEYTONE using the up a and down v keys Press OK Select ON to activate OFF to deactivate Press OK to confirm Ce ot Ole amp 4 4 2 Low battery Proceed as before but select at point 6 LOW BATTERY instead of KEYTONE 4 4 3 Handset out of range Proceed as before but select at point 6 OUT RANGE instead of KEYTONE 14 Topcom Butler 800 Twin Topcom Butler 800 Twin 4 5 HANDSET NAME This function allows you to personalise each handset 1 Enter the menu by pressing OK Select HANDSET using the up a and down v keys Press OK Select NAME using the up a and down v keys Press OK Enter the name Press OK to validate or oh While entering the name press c to delete a character and press and hold m to exit the menu without t
15. ing volume Choosing the ring melody Speaker volume during call Activation deactivation of beeps Handset name Changing the PIN code Setting the dialling mode Flash time duration Automatic answer Reset Keypad lock Advanced functions Phonebook Searching a handset from the base Managing multiple handsets Setting up an additional handset Removing a handset Setting up a handset on another base Selecting a base Trouble shooting Topcom warranty Warranty period Warranty handling Warranty exclusions Technical characteristics Topcom Butler 800 Twin Topcom Butler 800 Twin OODODODWMOANNDOOUU ENGLISH Topcom Butler 800 Twin SAFETY INSTRUCTIONS e Only use the charger plug supplied Do not use other chargers as this may damage the battery cells e Only insert rechargeable batteries of the same type Never use ordinary non rechargeable batteries Insert rechargeable batteries so they connect to the right poles indicated in the battery compartment of the handset e Do not touch the charger and plug contacts with sharp or metal objects e The operation of some medical devices may be affected e The handset may cause an unpleasant buzzing sound in hearing aids e Do not place the basic unit in a damp room or at a distance of less than 1 5 m away from a water source Keep water away from the handset e Do not use the telephone in environments where there is a risk of explosions e Dispose of the batteries and
16. maintain the telephone in an environment friendly manner e As this telephone cannot be used in case of a power cut you should use a mains independent telephone for emergency calls e g a mobile phone e This telephone uses rechargable batteries You have to dispose of the batteries in an environment friendly manner according to your country regulations ge oo 3s NiMH CLEANING Clean the telephone with a slightly damp cloth or with an anti static cloth Never use cleaning agents or abrasive solvents The CE symbol indicates that the unit complies with the essential requirements of the R amp TTE directive 4 Topcom Butler 800 Twin Topcom Butler 800 Twin 1 DESCRIPTION OF TELEPHONE 1 1 HANDSET AND BASE BUTLER 800 ENGLISH Earpiece Display 7 i Handfree Phonebook H D N Gea Menu OK Escape key C eee OA Up Key Mute Delete Redial key pause key Line key Down Key Call log Key Keypad lock key Flash key Power ON OFF Microphone Butler 800 Internal call Power indicator Incoming call LED Charge indicator TOPLOM Paging Key Set up subscription press and hold Topcom Butler 800 Twin Topcom Butler 800 Twin 1 2 CHARGER BUTLER 800 Butler 800 Charge indicator 1 3 DISPLAY Icon line Character display line 12 characters maximum Each op
17. nfirm or m to return to the previous menu ae Oh 4 1 2 Base ring 1 Enter the menu by pressing OK 2 Select SETUP using the up a and down v keys 3 Press OK 4 Select BASE VOLUME using the up a and down v keys 5 Press OK 6 Select the desired volume OFF or 1 to 3 7 Press OK to confirm or m to return to the previous menu 4 2 CHOOSING THE RING MELODY The base and each handset can ring with a different melody The handsets can ring with a different melody according to whether the call is internal or external 4 2 1 Base melody Enter the menu by pressing OK Select SETUP using the up a and down v keys Press OK Select BASE MELODY using the up a and down v keys Press OK Select the melody of your choice 1 to 3 using the up and down w keys Press OK to confirm or to return to the previous menu ee oe ONS Topcom Butler 800 Twin 13 Topcom Butler 800 Twin 4 2 2 Handset melody external call Enter the menu by pressing OK Select HANDSET using the up a and down v keys Press OK Select EXT MELODY using the up and down w keys Press OK Select the melody of your choice 1 to 3 using the up a and down v keys Press OK to confirm or to return to the previous menu oe ae oS NS 4 2 3 Handset melody internal call 1 Enter the menu by pressing OK 2 Select HANDSET using the up and down w keys 3 Press OK 4 Select INT MELODY using the up a and down v keys 5 Press OK 6 Select t
18. overed under warranty The warranty does not cover damage caused by outside factors such as lightning water and fire nor any damage caused during transportation No warranty can be claimed if the serial number on the units has been changed removed or rendered illegible Any warranty claims will be invalid if the unit has been repaired altered or modified by the buyer or by unqualified non officially appointed Topcom service centres 22 Topcom Butler 800 Twin TECHNICAL CHARACTERISTICS Standard Frequency range Number of channels Modulation Speech coding Emission power Range Base power supply Handset Batteries Handset autonomy Talk time Charging time Normal conditions of use Dialling mode Flash time Topcom Butler 800 Twin Topcom Butler 800 Twin DECT Digital Enhanced Cordless Telecommunications GAP Generic Access Profile 1880 MHZ to 1900 MHz 120 duplex channels GFSK 32 kbit s 10 mW average power per channel max 300 m in open space 10 50 m inhouse 230 V 50 Hz for the base 2 rechargeable batteries AAA NiMh 550mAh 100 hours in standby 10 hours 6 8 hours 5 C to 45 C Pulse Tone 100 or 250 ms ENGLISH 23 TOPCOM visit our website www topcom net U8006360
19. s Press OK Select KEY LOCK using the up and down w keys Press OK to lock the keypad Se ee 4 11 2 Locking the keypad by the key quick lock Press and hold the key for 3 seconds The keypad will be locked 4 11 3 Unlock the keypad 1 Press any key 2 PRESS will appear on the screen 3 Press the key within 3 seconds to unlock the keypad 5 ADVANCED FUNCTIONS 5 1 PHONEBOOK The Phonebook allows you to memorise 50 telephone numbers and names You can enter names of up to 12 characters length and numbers of up to 20 digits length To call a correspondent whose number is stored in the phonebook refer to the section 3 13 To enter alphanumerical characters refer to the section 3 14 9 1 1 Add an entry into the phonebook 1 Enter the menu by pressing OK Select PHONE BOOK using the up a and down v keys Press OK Select ADD ENTRY using the up a and down v keys Press OK Enter the name Press OK to validate Enter the telephone number Press OK to validate 10 Select the desired melody 1 3 by means of the up down key 11 Press OK to Validate O00 oO Oe oe Topcom Butler 800 Twin 17 Topcom Butler 800 Twin 5 1 2 Modify a name or number To modify a number in the phonebook 1 DARUL N o N Enter the menu by pressing OK Select PHONE BOOK using the up a and down v keys Press OK Select MODIFY ENTRY using the up and down w keys Press OK Move through the list of names with the up a
20. ss f To correct a number use the a c key to delete an entered digit 3 5 MAKING AN INTERNAL CALL 1 Press INT 2 Enter the number of the internal handset 1 to 2 3 6 HAND FREE MODE You can speak with your correspondent without picking up the handset To activate or deactivate the hands free mode press the key during a call To adjust the volume refer to the chapter Personalisation adjusting speaker volume Topcom Butler 800 Twin 9 Topcom Butler 800 Twin 3 7 INTERNAL CALL TRANSFER When you want to transfer an external call to another handset 1 During a conversation press INT 2 Select the number of the internal handset the external caller is put on hold 3 When the other handset picks up press to hang up and transfer the call If the internal corespondent does not pick up press INT again to reconnect to the external caller on line 3 8 DISPLAY OF CALL DURATION The call duration is displayed after 15 seconds in minutes seconds At the end of each call the total call duration is displayed for 5 seconds 3 9 MICROPHONE MUTE It is possible to mute the microphone during a conversation Press during the conversation the microphone is then deactivated you can talk freely without being heard by the calling party MUTE is displayed Press again to return to normal mode 3 10 PAUSE KEY When dialling a number you can add a pause between two digits by pressing the redail pause ar key for
21. st calls of 32 digits you have made in memory The correspondents called are identified by their telephone number or by their name if they appear in the phonebook To consult the redial list 1 Press 2 Scroll through the calls with the up a and down yw arrows 3 To call by the selected correspondent simply press when their telephone number or name is displayed Note When name is displayed you can toggle between name and number by pressing the OK key Topcom Butler 800 Twin 11 Topcom Butler 800 Twin 3 13 CALLING FROM THE PHONEBOOK To call a correspondent whose name you have saved in the phonebook 1 Press a to enter the phonebook 2 Press the first letter of the name The first name that starts with this letter or the nearest letter in the alphabet will be displayed 3 Go through the list of names with the up a and down v keys The list scrolls in an alphabetical order 4 Press to dial the number of the correspondent whose name is displayed To see the number before dialling carry out steps 1 to 3 from before and press Ok 3 14 USING THE ALPHANUMERICAL KEYPAD With your telephone you can also enter alphanumeric characters This is useful for entering a name into the phonebook giving a name to a handset To select a letter press the corresponding key as many times as is necessary For example to select an A press 2 once to select a B press 2 twice and so on To select A
Download Pdf Manuals
Related Search