StarTech.com 1 Port PCI Express Gigabit Ethernet NIC Network Adapter Card
Contents
1. 1 Please shutdown your computer and move the card to another avail able slot then re install the ST1000SPEX drivers again 2 This icon usually means that there is a resource conflict between the ST1000SPEX and another card in your system Please move the card to another available slot and restart your computer Windows will then re configure itself and re assign resources Check your device manager again If the exclamation point is still there repeat the process until it no longer appears The card is not operating at Gigabit Ethernet transfer speeds 1 Please affirm your Ethernet environment supports Gigabit structure 2 Please use CAT6 UTP STP cable StarTech com Specifications Bus Type PCI Express Yes 2 X 100 Link Active LED Green Gigabit Link Active LED Green 2 5 Gbps Full Duplex Support LED Indicators Maximum Data Transfer Rate Number of Ports Auto MDIX Yes StarTech com Technical Support StarTech com s lifetime technical support is an integral part of our com mit ment to provide industry leading solutions If you ever need help with your product visit www startech com support and access our com prehensive selection of online tools documentation and downloads Warranty Information This product is backed by a two year warranty In addition StarTech com warrants its products against defects in materials and workmanship for the periods noted following the initial d2. Installation To connect the ST1000SPEX to the computer motherboard 1 Shut down all power connected to the computer as well as all devices connected to the computer peripherally i e Printers Monitors Scanners etc As an added step to ensure safe installation unplug the power supply from the power outlet 2 Remove the computer cover For more detailed instruction on how to perform this step please refer to the documentation that was included with your computer at the time of purchase 3 Locate an empty PCI Express x1 slot removing the metal bracket covering the corresponding port socket located at the back of the com puter case Please note This card will function correctly in extended PCle slots e g x4 x16 if available 4 Position the card above the open PCI Express slot ensuring that the card is aligned with the entire slot Insert the card firmly into the slot distributing force evenly across the length of the board Once inserted secure the card into the adjoining socket previously covered by metal bracket using the correct size screw please consult documentation 1 StarTech com that accompanied the purchase of your computer 5 Replace the computer cover 6 If unplugged plug computer and all peripherals back in to power source Turn your computer on Driver Installation Windows 2000 XP Server 2003 1 When the Found New Hardware Wizard window pops up please click the Cancel button
3. all our products and to access exclusive interactive tools such as the Cable Finder Parts Finder and the KVM Reference Guide
4. to cancel the driver installation for the device at this moment The driver will be installed in the next step 2 Please insert the included driver CD into your CD ROM Drive 3 From the Start Bar click Run 4 Type D PCle LAN setup exe then click OK Change D to match your CD ROM drive letter 5 Follow the on screen instructions to complete the installation 6 Restart Windows to finalize the installation Windows Vista 1 Please insert the included driver CD into your CD ROM Drive 2 From the Start Bar click Run 3 Type D PCle LAN Vista setup exe then click OK Change D to match your CD ROM drive letter 4 Follow the on screen instructions to complete the installation 5 Restart Windows to finalize the installation Verifiying Driver Installation Navigate to the Windows Control Panel and click on System Prop erties then the Device Manager tab You should see a Realtek RTL8168 8111 PCI E Gigabit Ethernet NIC Windows 2000 XP Serv 2 StarTech com er2003 or Realtek RTL8168 8111 Family PCI E Gigabit Ethernet NIC NDIS 6 0 Windows Vista installed under Network adapters item Networking Settings 1 Click Network Connection in the Control Panel to set your network settings 2 Right click the Local Area Connection used by the ST1000SPEX then select Properties from the pop up menu 3 Double click the Internet Protocol TCP IP item to change network settin
5. STILO SEA Instruction Manual PCI Express 10 100 1000 Mbps Gigabit Ethernet Card StarTech com Making hard to find easy FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide rea sonable protection against harmful interference in a residential installation This equip ment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio com munications However there is no guarantee that interference will not occur in a particu lar installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Use of Trademarks Registered Trademarks and other Protected Names and Symbols This manual may make reference to trademarks registered trademarks and other protected names and or symbols of third party companies not related in
6. any way to StarTech com Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech com or an en dorsement of the product s to which this manual applies by the third party company in question Regardless of any direct acknowledgement elsewhere in the body of this doc ument StarTech com hereby acknowledges that all trademarks registered trademarks service marks and other protected names and or symbols contained in this manual and related documents are the property of their respective holders StarTech com Table of Contents IrnitroductiOn oe cccesenscasdeccccnssassscascceassessesceennes 1 Features ooo ececcccsseeeeeeecesseaaeeeeeeseeeseeseeeeseeeeeesaeeeeeeseeeeeaeeeeeeeees 1 Package Contents 1 0 nee rne tnn rcr nr etri 1 Hardware Guide c ceccceesesesseeeeeee nennen nnn nna 2 SDeCIfICaliOriS ido tu err aa R Ens nra deua den exa nmn 4 Iristallation amp Corninectiori iiiter EEE 4 Technical Support ire rei reoo cate biasa 5 Warranty Information eeeeeeeeeeeeeeeenennnn nn 5 StarTech com Installation Package Contents e 1x Driver CD 1x Gigabit Ethernet Card e 1x Low Profile Bracket 1xManual System Requirements Windows 2000 XP Server 2003 Vista PCI Express enabled system with an available PCI Express slot e CATS CATSE CAT6 UTP STP cable Hardware
7. ate of purchase During this period the products may be returned for repair or replacement with equivalent products at our discretion The warranty covers parts and labor costs only StarTech com does not war rant its products from defects or damages arising from misuse abuse alteration or normal wear and tear Limitation of Liability In no event shall the liability of StarTech com Ltd and StarTech com USA LLP or their officers directors employees or agents for any dam ages whether direct or indirect special punitive incidental consequen tial or otherwise loss of profits loss of business or any pecuniary loss arising out of or related to the use of the product exceed the actual price paid for the product Some states do not allow the exclusion or limitation of incidental or consequential damages If such laws apply the limita tions or exclusions contained in this statement may not apply to you StarTech com StarTech com has been making hard to find easy since 1985 providing high quality solutions to a diverse IT and A V customer base that spans many channels including government education and industrial facilities to name just a few We offer an unmatched selection of computer parts cables A V products KVM and Serv er Management solutions serving a worldwide market through our locations in the United States Canada the United Kingdom and Taiwan Visit www startech com today for complete information about
8. gs 4 You can affirm the network status by right clicking the Local Area Connection used by the ST1000SPEX then selecting Status from the pop up menu How to Configure 10 100 1000Mbps Ethernet Structure Connect to your 10 100 1000Mbps Ethernet connection over un shielded twisted pair UTP cable The ST1000SPEX will automatically operate on either speed without manual reconfiguration Troubleshooting The computer is not detecting the ST1000SPEX 1 Make sure that the ST1000SPEX is correctly inserted into the PCI Express slot if not turn off the computer and plug it again 2 If the ST1000SPEX is plugged in correctly see if the golden connec tors on the card are clean if not clean the connector surface 3 If the ST1000SPEX is still not recognized please change to another PCI Express slot on your motherboard 4 Please upgrade your motherboard BIOS to the latest version 5 The card itself might be defective You can try testing the 3 StarTech com ST1000SPEX on another motherboard Computer failed to start after inserting Gigabit Ethernet PCI Express Card Turn off the computer remove the ST1000SPEX and try to restart the computer If the computer starts successfully it means that this card has not been inserted into the PCI Express slot correctly Please insert the card firmly into the PCI Express slot or try another slot How to deal with an exclamation point icon on the Ethernet Host controller
Download Pdf Manuals
Related Search