StarTech.com SV565UTPUGB video splitter
Contents
1. Ctrl Esc sequence Enables 2 beeps or disables 1 beep Com patibility Mode so that Ctrl Ctrl Alt E Ctrl Ctrl Alt E the KVM extender will work with a KVM switch that also uses a Ctrl hotkey sequence 11 Instruction Manual With Compatibility Mode Enabled Standard Command Description Switches control to Ctrl Ctrl 1 Computer B Switches control to Computer A input allowed only if the Host Unit is in Remote or Auto mode Ctrl Ctrl 2 Toggles console control between Computer A and Computer B Ctrl Ctrl F2 Adjusts the typematic rate for improved key board responsiveness PS 2 keyboard only Ctrl Ctrl F4 Adjusts remote video quality based on the length of UTP cabling Ctrl Ctrl F11 Ctrl Ctrl E F11 between the two computers available only when switched to Computer A Ctrl Ctrl F12 Reset PS 2 mouse synchronization Ctrl Ctrl E F12 Beep Codes Some of the keyboard command sequences you issue to the Remote Unit have multiple possible settings The Unit will beep to indicate what setting you have selected for the command you issued A short beep followed by a long beep indicates an invalid command Ctrl Ctrl Alt E Compatibility Mode 1 beep disabled 2 beeps enabled 12 Instruction Manual2. Default 2 3 beeps Disable the Local Unit output video signal B Local Unit in Auto mode LED A amp B flashes alternately 1 beep Reset to Factory Ctrl Ctrl F6 Ctrl Ctrl E F6 Default 2 beeps Upon keyboard mouse activation disables the Local Unit video output temporarily Set for 5 15 30 or 60 second interval 3 beeps Upon keyboard mouse activation the Remote Unit or Local Unit users can disable the output video signal temporarily The user can protect their privacy for 5 15 30 60 seconds Resets PS 2 mouse synchro Ctrl Ctr F12 Ctrl Ctrl E F12 oe Instruction Manual Beep Codes Some of the keyboard command sequences you issue to the Host Unit have multiple possible settings The unit will beep to indicate what setting you have selected for the command you issued A short beep followed by a long beep indicates an invalid command Ctrl Ctrl Alt E Compatibility Mode 1 beep disabled 2 beeps enabled Ctrl Ctrl F3 Inactivity Interval for Auto Mode 1 beep 5 seconds 2 beeps 15 seconds 3 beeps 30 seconds 4 beeps 60 seconds Ctrl Ctrl F4 Typematic Rate 1 beep 6 characters sec 2 beeps 12 characters sec 3 beeps 20 characters sec 4 beeps 30 characters sec Note Commands described in the Key Key format are keys that must be pressed in order on the keyboard Commands described in the Key
3. Key format must be pressed simultaneously Note If the Num Lock Caps Lock and Scroll Lock lights are flashing in unison on the keyboard the other Unit has control of Computer A You will not be able to use the computer or issue commands until the other unit has finished using the computer Note If the Extender is operating in Compatability Mode Ctrl Ctrl E hotkey sequence you must enter Ctrl Ctrl E E to access port E on the attached KVM switch 10 Instruction Manual Using the Remote Unit The Remote Unit allows a user at the Remote Unit to assume control of devices connected to the Host Unit if the Host Unit is set to Auto or Re mote mode and it also permits the user seated at the Remote Unit to use any connected system as though the KVM Extender was transparent You can use either keyboard shortcuts or the mode switch on the top of the Host Unit to alternate control between A and B Unlike the Host Unit however the switch on top of the Remote unit only offers two selectable modes Local gt Remote LED Indicators Mode A Indicator B Indicator Remote Access Computer A Local Access Computer B On solid Keyboard Shortcut Command Sequences Standard Command Huc ompaiibiitynode Description Enabled Toggles console control Ctrl Ctrl T Ctrl Ctrl T between Computer A and Computer B Cancels the hotkey Ctrl Ctrl Esc Ctrl
4. and remote locations Using the Host Unit The Host Unit allows users connected to the Host and Remote units to share control of devices hosts computers KVM Switches connected to it The Host Unit has three modes that control which user may access the system at a given time Auto the KVM extender looks for keyboard or mouse activity from both A and B and automatically accepts input from the active console Local only the user seated at the Host unit can ac cess the system and Remote only the user at the Remote station can access the system You can use either keyboard shortcuts if there is a keyboard and mouse attached or the mode switch on the top of the Host Unit to control which user has access to devices connected to the Host unit by pressing the button in sequence By default the Host Unit operates in Auto mode and switches to the next mode in the sequence each time the switch is pressed as follows gt Auto gt Local gt Remote C EA Having a keyboard and mouse attached to the console ports on the Host Unit is recommended since it offers access to a number of extended features LED Indicators Mode A Indicator B Indicator Auto Auto senses activity Flashing Flashing Local User at Local Unit has exclusive control On solid Off Remote User at Remote Unit has exclusive control Off On solid Instruction Manual Keyboard Shortcut Command Sequences With Compatib
5. B VGA KVM cables 1 x Set of rubber mounting feet Instruction Manual Connecting Your KVM Extender Preparing Your Site Before you can install the the product you need to prepare your site 1 Determine where the host computer will be located and set up the computer 2 Determine where the console devices mouse keyboard monitor will be located and place them appropriately 3 a If you are using surface cabling ensure you have enough Category 5 unshielded twisted pair UTP network cabling to connect the Host Unit to the Remote Unit s location and that each end is terminated with a RJ 45 connector OR 3 b If you are using premises cabling ensure that the Category 5 unshielded twisted pair UTP network cabling between the Host Unit and the Remote Unit has been properly terminated in a wall outlet in each location and there is a patch cable long enough to connect the Remote Unit and the Host Unit to their respective outlets Instruction Manual Installing the Host Unit Cat 5 Cable Control Direction Computer Console Console Computer B optional e 1to2 2to1 1 Place the Host Unit near the computer 2 Switch off the computer and disconnect any connected devices 3 Using the provided StarTech com integrated KVM cable see page 15 for alternative part numbers connect the end of the cable that has two USB or three PS 2 VGA connectors to the VGA Out connector and the USB or mouse a
6. Ctrl Ctrl F11 Remote Image Quality Adjustment 1 beep 0 130 feet 0 40 meters of UTP cable length 2 beeps 130 260 feet 40 80 meters of UTP cable length 3 beeps 260 390 feet 80 120 meters of UTP cable length 4 beeps 390 500 feet 120 150 meters of UTP cable length Ctrl Ctrl F4 Typematic Rate 1 beep 6 characters sec 2 beeps 12 characters sec 3 beeps 20 characters sec 4 beeps 30 characters sec Note Commands described in the Key Key format are keys that must be pressed in order on the keyboard Commands described in the Key Key format must be pressed simultaneously Note If the Num Lock Caps Lock and Scroll Lock lights are flashing in unison on the keyboard the other Unit has control of Computer A You will not be able to use A until the other Unit releases access to that computer Note If the Extender is operating in Compatability Mode Ctrl Ctrl E hotkey sequence you must enter Ctrl Ctrl E E to access port E on the attached KVM switch 13 Instruction Manual Specifications 1024 x 768 at maximum UTP cable length Maximum Resolution Actual maximum resolution varies by network cable length Maximum Range 500 feet 150 meters Neiro Gling Straight through Unshielded Twisted Pair UTP Cat 5 Type Each Host and Remote Unit 2 x HD 15 female 1 x KVM 1 x console VGA Connectors 1 x RJ 45 2 x USB keyboard mouse for con
7. USB VGA Cat 5 UTP sConsole Extender gt SVSBSUTPU SVS65UTPUGB SVSB5UTPUEU Instruction Manual StarTech com Making hard to find easy FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide rea sonable protection against harmful interference in a residential installation This equip ment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio com munications However there is no guarantee that interference will not occur in a particu lar installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Use of Trademarks Registered Trademarks and other Protected Names and Symbols This manual may make reference to trademarks registered trademarks and other protected names and or symbols of third party com
8. UTP straight through network cable terminated at each end with RJ 45 connectors if using surface cabling OR e Unshielded Category 5 5e 6 twisted pair UTP straight through network cable terminated at each end in a wall mounted outlet with a standard Category 5 5e 6 patch cable at both locations if using premises cabling NOTE The total length of cable between the Host and Remote Units 1 Instruction Manual cannot exceed 500 feet 150 meters including patch cables if used Category 5e and 6 cabling is compatible with this product and may im prove performance NOTE Long cable lengths between the Host and Remote Units may adversely affect image quality at high resolutions and refresh rates If you need to run your remote displays at high resolutions and frequencies use as little cabling between locations as possible and avoid practices such as coiling unused cable in a ceiling This product will also control a KVM switch allowing you to manage more than one computer remotely In this configuration you can connect the KVM extender s Host Unit to the console ports on the KVM You must use the provided power adapters if using this configuration You should set the Host Unit to Compatibility Mode before connecting it to a KVM that uses the Ctrl key as its hotkey sequence see page 8 for details Package Contents 1 x Host Unit 1 x Remote Unit 1 x Instruction Manual 1 x Power adapter 2 x 6 ft 2 in 1 US
9. he products may be returned for repair or replacement with equivalent products at our discretion The warranty covers parts and labor costs only StarTech com does not warrant its products from defects or damages arising from misuse abuse alteration or normal wear and tear Limitation of Liability In no event shall the liability of StarTech com Ltd and StarTech com USA LLP or their officers directors employees or agents for any damages whether direct or indirect special punitive incidental consequential or otherwise loss of profits loss of business or any pecuniary loss arising out of or related to the use of the product exceed the actual price paid for the product Some states do not allow the exclusion or limitation of incidental or consequential damages If such laws apply the limitations or exclusions contained in this statement may not apply to you 16 StarTech com Making hard to find easy StarTech com has been making hard to find easy since 1985 providing high quality solutions to a diverse IT and A V customer base that spans many channels including government education and industrial facilities to name just a few We offer an unmatched selection of computer parts cables A V products KVM and Serv er Management solutions serving a worldwide market through our locations in the United States Canada the United Kingdom and Taiwan Visit www startech com today for complete information about all o
10. ility Mode Enabled Standard Command Description Toggles control of Computer Ctrl Ctrl T Ctrl Ctrl T A between Auto Local and Remote modes Ctrl Ctrl Esc Ctrl Ctrl Esc Cancels the hotkey sequence Enables 2 beeps or disables 1 beep Compatibility Mode so that the KVM extender will work with a KVM switch that also uses a Ctrl hotkey sequence Ctrl Ctr Alt E Ctrl Ctrl Alt E Local Mode Allows the user at Local Unit A exclusive Ctrl Ctrl 1 Ctrl Ctrl E 1 access to the system remote access from Remote Unit B Remote Unit B is disabled Remote Mode Allows the console at Remote Unit B ex Ctrl 2 Ctrl E 2 clusive access to Computer A access to the computer from the Host Unit is disabled Ctrl Auto Mode Wait for console Ctrl Ctrl 3 Cte Ctr E 3 sctvity Sets the interval of inactivity in seconds that the Host Unit Ctrl F3 Ctrl E F3 will wait before returning to Auto Mode after a Unit has assumed control Ctrl Adjusts the typematic rate for Ctrl F4 Ctrl Ctrl E F4 improved keyboard respon siveness PS 2 keyboard only Ctrl Instruction Manual With Compatibility Mode Enabled Standard Command Description Privacy Setting A Local Unit in Local mode LED B Off LED A On 1 beep Reset to Factory
11. nd keyboard PS 2 connectors on the computer as appropriate The PS 2 version of the cable is color coded Connect the opposite end of the cable with a single connector to the gray coded connector marked COMPUTER on the Host Unit of the KVM extender 4 If you wish to have console access to the host computer connect a USB mouse keyboard and VGA monitor to the indicators marked as CONSOLE on the Host Unit 5 Connect the UTP cable connection for Remote Unit to the NETWORK RJ 45 connector on the Host Unit Connect the opposite end to a terminated wall outlet if you are using premises cabling Instruction Manual Installing the Remote Unit 1 Place the Remote Unit near the computer 2 Switch off the computer and disconnect any existing VGA and input connections 3 Using a StarTech com integrated KVM cable see page 15 for part numbers connect the end of the cable that has two USB or three PS 2 connectors to the VGA Out connector and the USB or mouse and keyboard PS 2 connectors on the computer as appropriate The PS 2 version of the cable is color coded Connect the opposite end of the cable with a single connector to the gray coded connector marked COMPUTER on the Remote Unit of the KVM extender 4 Connect a USB mouse keyboard and a VGA monitor to the indicators marked as CONSOLE on the Remote Unit 5 Connect the UTP cable connection for Remote Unit to the NETWORK RJ 45 connector on the Remote Unit Connect the oppo
12. panies not related in any way to StarTech com Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech com or an en dorsement of the product s to which this manual applies by the third party company in question Regardless of any direct acknowledgement elsewhere in the body of this doc ument StarTech com hereby acknowledges that all trademarks registered trademarks service marks and other protected names and or symbols contained in this manual and related documents are the property of their respective holders Table of Contents INtFOGUGTION i sccesssisciciccscasenssiensindensavststeceuntedeccesdivescastivaraats 1 FAAUO S heoir ienei e apie Sih teh bee el els 1 System RequireMent cccsscesessesesseseesesesseeeecseeeseeeseaes 1 PACKAGE COMENS iss icceeicescieriscedadedsnsdstanssstasseussestiecednentsasdsnceson 2 Connecting Your KVM Extende r ccseccssseeeseeeeeeees 3 Preparing Your Site cccccceesceseeseessesseeseeeseseeeseseensneneeneees 3 Installing the Host Unit ccc ecssesseessesseesseeseesseseeneeneenenes 4 Installing the Remote Unit cess sesseseeeeeeeeseeeeeeeneeneees 5 Video Compensation ccccccseseeessseeeseseeeeesseeeensseeees 6 Using the KVM Extender ccsceessseeeenseeeeeensseeenseeeeee 7 Using the Host Unit ccssssscesssestesseessenseessessessneneessnensesnes Using
13. site end to a terminated wall outlet if using premises cabling CAUTION The UTP network cables that connect the Host AN and Remote Units carry electrical current and should not be plugged in to other devices as they may cause damage We strongly recommend marking the cables you are using with this product at both locations for easy identification Instruction Manual Video Compensation Video Compensation allows the user to adjust the equalization on the Remote Unit to optimize video performance based on the length of cable being used as well as other factors that may affect There are five seg ments of various lengths of CAT 5 cables from which to chose to achieve the best visibility please refer to the section titled Keyboard Shortcut Command Sequences to adjust the video compensation My Computer Fle Edt View Favorites Tools Help GO SB Peh E rod ddress My Computer a samues Documents Other Places Hard Disk Drives G My Network laces D My Documents QP aoc Shared Documents D gt control pane Q aoko My Computer System Folder After Video Compensation First note the length of CAT 5 cable you used Then use the hotkeys to adjust the video compensation accordingly You can use the hotkey sequence as outlined in the section titled Keyboard Shortcut Command Sequences Instruction Manual Using the KVM Extender This section details how to use your KVM extender at both the host
14. sole 1 x Power optional 9V DC 600mA center positive per Unit Power Adapter Optional only required when connected using a con ventional KVM switch RJ 45 Connector Pinout Instruction Manual Accessory Products from StarTech com Contact your local StarTech com dealer or visit www startech com for cables or other accessories that will help you get the best performance out of your new product R45PATCH35 35 ft Blue Snagless Category 5e 350 MHz UTP Patch Cable R45PATCH50 50 ft Blue Snagless Category 5e 350 MHz UTP Patch Cable R45PATCH75 75 ft Blue Snagless Category 5e 350 MHz UTP Patch Cable R45PATCH100 100 ft Blue Snagless Category 5e 350 MHz UTP Patch Cable SVECONUS6 6 ft Ultra Thin USB 2 in 1 KVM Cable SVECONUS10 10 ft Ultra Thin USB 2 in 1 KVM Cable SVECONUS15 15 ft Ultra Thin USB 2 in 1 KVM Cable 15 Instruction Manual Technical Support StarTech com s lifetime technical support is an integral part of our commit ment to provide industry leading solutions If you ever need help with your product visit www startech com support and access our comprehensive selection of online tools documentation and downloads Warranty Information This product is backed by a one year warranty In addition StarTech com warrants its products against defects in materi als and workmanship for the periods noted following the initial date of purchase During this period t
15. the Remote Unit Specifica ONS iiss sse karaa a aaae naagin darana Earias 14 RJ 45 Connector PINOUE sissies 14 Accessory Products from StarTech com sssssessssesen 15 Technical SUPPOrt cccssseeeesseseeesseceeseseeeeeenseeeeeseeeeer 16 Warranty Information ssssssessnnnnnennnnnnnnnnnnnnnnnnnnnennnnnn nnn 16 Instruction Manual Introduction Thank you for purchasing a StarTech com KVM extender This product al lows a computer to control a host system from a remote location at a dis tance of up to 500 feet 150 meters For ease of installation this product uses standard Category 5 5E or 6 network cabling that fits easily into almost any existing network infrastructure For added versatility the KVM extender supports either PS 2 or USB computer interfaces Console sup port is provided using standard USB and VGA connectors Features e Can be used with a single computer or connected to an existing KVM switch e Easy installation using industry standard UTP network cable e Intuitive hotkey commands e Supports auto switching between host and remote users or dedicated control e USB computers are supported at the host and remote locations USB keyboard and mouse required for remote console System Requirements 1 x integrated KVM cable each for the host and remote computers Longer cables are available from StarTech com part numbers SVECONx PS 2 SVECONUSx USB e Unshielded Category 5 5e 6 twisted pair
16. ur products and to access exclusive interactive tools such as the Cable Finder Parts Finder and the KVM Reference Guide PP5 ZE6200 011
Download Pdf Manuals
Related Search