Hanns.G HT11
Contents
1. VGA Cable Optional 20 Se BEA SZ 19EU book Page 21 Thursday April 10 2008 5 31 PM 2 2 7 Connecting HDMI HDMI High Definition Multimedia Interface assures that the best video signal is always sent form source to the TV Refer to the following illustration to connect an HDMI device to the TV DVD Player ek HDMI Cable Optional HANNSpree 21 ag SZ I9EU book Page 22 Thursday April 10 2008 5 31 PM 2 3 Using the TV 2 3 1 Turning the TV On and Off 1 Press 1 on the control panel or remote control The power LED indicator on the front of the TV changes from amber to blue indicating that the power is on 2 Press 1 again The power LED changes from blue to amber indicating that the TV is off Wait 3 5 seconds before you do anything after the shut down 2 3 2 Switching Source Signals Press INPUT on the control panel or remote control to select the incoming source signal to set TV source for channel search Press OK to confirm 2 3 3 Performing an Automatic Channel Search Before using the TV to view programs you need to activate the automatic channel search first 1 Press MENU on the control panel or remote control then select to enter the Channel or DTV menu 2 Select an appropriate area 3 S2. 29 3 7 Adjusting Setup Settings 2222 22 29 4 Troubleshooting 31 5 Specifications 2 32 5 1 Mode Support Timing 2 01 1 33 5 2 HDMI Mode Support Timing 4 0 0 33 2 Hannspree e e SZ 19EU book Page 3 Thursday April 10 2008 5 31 PM Regulatory Information CE Conformity Statement This device is in conformity with the requirements of EU Council Directive 2004 108 EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and Directive 2006 95 EC on the harmonization of the laws of Member States relating to electrical equipment for use within certain voltage limits Hannspree cannot accept responsibility for any failure to satisfy the requirements resulting from a non recommended modification of the device Description of Warning Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol is used to alert users This symbol is used to alert users to pay attention to important to the risk of electric shocks due descriptions regarding usage to dangerous and uninsulated maintenance repair and components additional important information related to this TV HANNSpree 3 t gt og SZ I9EU book Page 4 Thursday April 10 2008 5 31 PM Safety Notices Insta
3. Displays the setting value Quick instructions for of the adjustable items adjusting the settings Function TV Control Panel Remote Control OSD Menu MENU MENU Up PA Arrow A Down Arrow v Select Increase VOL Arrow gt Select Decrease VOL Arrow lt Return MENU MENU HANNSpree 23 MW e gt E 19EU book Page 24 Thursday April 10 2008 5 31 PM 3 1 OSD Setting Menus Follow the instructions indicated on the right side of the OSD Function Menu Press PA P on the control panel or A w arrow keys to scroll through the menus VOL on the control panel or the gt arrow key to select an item or MENU to exit the OSD menu The following menus can be set by different adjustment methods 3 2 Adjusting Picture Settings 1 Press MENU to enter the OSD Main Menu Luc Fan Screen Er Standard Brightness 2 1 150 2 Press select Picture Contrast m Sharpness 15 3 Dress gt to enter the Picture Menu Colour Een Hue mmm 50 4 Press A to select an item Backlight 2 5 Press lt or gt to change the mode setting reis ies or scales 6 Press MENU to select the changed setting and return to the Picture Menu 7 Press MENU to exit the Picture menu 8 The Picture menu can be used to adjust the Picture Mode Brightness Contrast Sharpness Colour Hue Backlight and Colour Temp settings The Picture Mode can be set to Standard Vivid Soft or User The Colour
4. small objects or flammable materials into the vent of the TV 4 If the TV is dropped falls down or is otherwise damaged unplug the power cord immediately and contact an authorized service technician 5 If any fluid is sprayed or dropped into the TV contact an authorized service technician 6 The screen of the TV is made of glass Avoid hitting or scraping it If the screen is broken do not touch the broken glass 7 Do not allow children to use the TV unattended 8 Be careful when disconnecting the power plug Hold the plug Do not attempt to disconnect the plug by pulling on the power cord Installation 1 Do not place the TV in locations where there is excessive steam or dust 2 Avoid blocking the TV s vents do not place the TV on a bed sofa carpet or in a sealed cabinet 3 Install the outdoor antenna away from power transmission lines to avoid possible danger HANNSpree 5 NI SZ 19EU book Page 6 Thursday April 10 2008 5 31 PM Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television LCD TV Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology Please carefully read this manual in its entirety before setting up using or operating your TV To ensure the safe and correct installation and operations of the TV it is important that the safety and operation instructions in this manual are followe
5. 004 65 000 SXGA 60 1280x1024 60 63 981 60 020 108 000 5 2 HDMI Mode Support Timing Your TV supports video timing in the following resolutions 480i 480p e 576i 576p 720p e 10801 1080p uannspree 33
6. External Earphones 17 2 2 2 Connecting to AV 18 2 2 3 Connecting a VCR STB DVD Player Using Component 222 2 19 2 2 4 Connecting a VCR STB DVD Player Using Composite Video 1 19 2 2 5 Connecting a Decoder or VCR STB DVD Player Using SCART 20 2 2 6 Connecting a PC 20 2 2 7 Connecting HDMI 21 2 3 USING the 22 2 3 1 Turning the TV On and 22 2 3 2 Switching Source 22 2 3 3 Performing an Automatic Channel Search 22 2 3 4 Selecting Programs 22 2 3 5 Adjusting the Volume 2 2 70 22 3 Adjusting On Screen Display OSD Settings 23 3 1 OSD Setting 24 3 2 Adjusting Picture Settings sss 24 Hannspree 1 Se S 4 4 SZ 19EU book Page 2 Thursday April 10 2008 5 31 PM 7 Table of Contents 3 3 Adjusting Sound Settings 25 3 4 Adjusting Channel Settings Analog 25 3 5 Adjusting DTV Settings Digital 2 27 3 6 Adjusting PC Setup Settings
7. Temp can be set to Standard Cool or Warm Note The items available on the OSD may vary depending on the input signal source 24 HANNSpree t V Y D AW en 19EU book Page 25 Thursday April 10 2008 5 31 3 3 Adjusting Sound Settings 1 Press MENU to enter the OSD Main Menu Main Menu screen Sound Mode Balance Press to select Sound Treble Press gt to enter the Sound Menu Bass Press A to select item a P WN Press lt or gt to change the mode setting or scales Press MENU to select the changed setting and return to the Sound Menu Press MENU to exit the Sound menu 8 The Sound menu can be used to adjust the Sound Mode Balance Treble and Bass settings Sound Mode can be set to Standard Music Movie Speech or User Note The items available on the OSD may vary depending on the input signal source 3 4 Adjusting Channel Settings Analog TV 1 Press MENU to enter the OSD Main Menu EE Channel 2 Dress Y to select Channel Colour System 3 Press gt to enter the Channel Menu Sound System 4 Press A to select an item Manual Search 5 Press lt or gt to change the mode setting Channel Edit or scales 6 Press MENU to select the changed setting and return to the Channel Menu 7 Press MENU to exit the Channel menu 8 The Channel menu includes the following options Area
8. Channel Colour System Sound System Auto Search Manual Search and Channel Edit settings HANNspree 2 5 4 T Z 4 1 en 19EU book Page 26 Thursday April 10 2008 5 31 PM area can be set to England Italy France Spain Netherlands Portugal Turkey Poland Russia and Germany Colour System be set to AUTO PAL or SECAM Sound System can be set to AUTO BG DK I L or L Select Auto Search to activate the automatic TV channel search Press gt to enter the Channel Edit item the Channel Editor allows you to edit the detailed items including Channel Name Fine Tune and Skip of each channel Channel Frequency System Name 49 75 DK 49 75 Ka 49 75 49 75 E 49 75 On 49 75 x Fine Tune 49 75 A 49 75 E Skip 0 49 75 Swap il Insert Delete va Move Edit Notes If the desired area is not shown on the list the suggested default is Germany The Channel settings are available when the signal is set to TV source 26 HANNspree KA b ai gt 19EU book Page 27 Thursday April 10 2008 5 31 PM 3 5 Adjusting DTV Settings Digital TV 1 Press MENU to enter the OSD Main Menu Main Menu Channel Management screen Area England 2 Press to select DTV 3 Press gt to enter the DTV Menu Manual Search 4 Press A Y to selec
9. ENNA Ground Clamp Coaxial Cable Ground Note Images are for illustration only and may vary by model or region e H you cannot receive channels after connecting to an antenna or cable TV line try scanning for channels 16 S ag SZ 19EU book Page 17 Thursday April 10 2008 5 31 PM 2 2 Connecting External Devices Connect external devices such as VCRs STBs DVD players video game consoles earphones or a PC to the TV using the appropriate ports on the rear of the TV 2 2 1 Connecting External Earphones Headphones Speakers Built in Amplifier Note External speakers or headphones are not included with the TV The internal TV speakers will not output sound when earphones are plugged in Use external speakers with built in amplifiers only Only one external device for sound can be connected at a time HANNSpree 17 d 19EU book Page 18 Thursday April 10 2008 5 31 PM E 2 2 2 Connecting to AV Devices The following diagram illustrates how to connect the AV devices to your TV via HDMI A Component B SCART C and Composite D ports HDMI Cable Audio Cable Optional Optional Video Cable Optional Video Game lt gt Console 18 SCART Cable Optional Video Audio Cable Optional 00000
10. HANNSpree 19 Liquid Crystal Display Television Fernsehers mit Fl ssigkristallanzeige T l viseur cran Cristaux Liquides TV de Pantalla de Cristal L quido Questo televisore LCD LCD vloeibaar kristalscherm TV Televisor com de Cristais L quidos Telewizora cieklokrystalicznego 62 01000016G000 User s Manual SZ 19EU book Page 1 Thursday April 10 2008 5 31 PM Table of Contents Regulatory Information 3 Description of Warning Symbols 3 Safety 2 112 4 m T 6 Warranty and Service REENEN ENNER REENEN 6 1 Getting Started 8 1 1 Package Contents 8 1 2 Introducing the TV cipi HERE Ste ede dies 9 1 2 1 Features in Dre ite 9 1 3 Control Panel 10 1 4 Input and Output 0 0 11 1 5 Remote Control 12 2 Setting up your 16 2 1 Basic Connecthons AEN 16 2 1 1 Power Connection 2 2 16 2 1 2 Connecting an Antenna or Cable 16 2 2 Connecting External Devices 17 2 2 1 Connecting
11. NU OSD menu on off confirm the setting ave Press up down left or right to scroll through the on screen display menus Press to confirm the selection or setting OK OK and return to the previous menu when using OSD menus 12 nannspree Rs 19EU book Page 13 Thursday April 10 2008 5 31 PM Description Icon Function Electronic Program EPG Press to display program information Guide Teletext mode TEXT Press to switch to the teletext mode Volume adiust VOLI VOL Press VOL to increase audio volume Press VOL to decrease audio volume MUTE Press to eliminate sound Press it again Mute K or press the volume adjust buttons to restore sound D al sourd 1 1 Press to change the multi sound selection of the TV channel Press P A to increase the program Select number v program Press PV to decrease the program number Index INDEX Press to display a table of the available teletext subjects Mix MIX Press to display the text over the program on the screen Press to go to the sub page Subpage SVB PAGE Programmable in the teletext mode only Press to adjust screen size Switchisize SIZE Programmable in the teletext mode only Press to inactivate automatic page Hold HOLD change which only happens when more than one teletext page exists Programmable in the teletext mode only HANNSpree 13 gt S
12. TV can t be handled as normal trash in Europe when it is out of usage Please refer to the recycle information from our website to handle it 8 HANNSpree t gt SZ 19EU book Page 9 Thursday April 10 2008 5 31 PM 1 2 Introducing the TV You can watch PAL SECAM broadcast cable or digital television channels and easily connect a VCR STB or DVD player to the standard CVBS S Video and SCART input ports location of these ports depends on model You can also use the TV as a monitor for your PC by connecting it through the D sub port Convenient control buttons located on the TV and a handy remote control let you change channels adjust the volume and change display settings through an easy to use on screen display menu system The built in stereo speakers provide full rich sound and a convenient audio output port lets you connect to an external audio system or earphones 1 2 1 Features Built in TV tuner e Audio Video support PC audio input YPbPr CVBS video inputs SCART input output 3 5mm stereo earphone output VGA input HDMI input One set of R L audio inputs for YPbPr CVBS On Screen Display OSD menu system Teletext TTX 1 5v 252 pages Built in stereo speakers 3D CombFilter Noise Reduction Note The supporting devices mentioned in this manual may vary on different models For more information please refer to the manufacturer s user manual or the Qu
13. Z 19EU book Page 14 Thursday April 10 2008 5 31 PM Description Icon Function Press to display the hidden information Reveal REVEAL such as solutions to puzzles Programmable in the teletext mode only Press to display the subtitles while Subtitle SUB TITLE watching DTV Favorite Press to select or store your favorite channel channels DTV only TV Radio Press to select radio source mode For DTV only Press to adjust the viewing angle with Aspect ratio ASPECT aspect ratio Auto 16 9 or 4 3 Not for PC mode Press to select Standard Vivid Soft User mode Press repeatedly to set the sleep timer 15 30 45 or 60 minutes A countdown timer is displayed on the Sleep timer SLEEP middle of the screen during the last minute to alert the user Cancel the timer by pressing the button until the displayed time disappears Note For best results use the remote control within a proper distance from the front of the TV Do not exceed an angle of 30 degrees when pointing at TV The operational distance may be shortened when the signal sensor is directly exposed to strong light Aim the transmitter on the remote control at the signal sensor and ensure that there are no obstacles between them 14 HANNspree gt SZ 19EU book Page 15 Thursday April 10 2008 5 31 PM E CAUTION Ifth
14. ained in the product described herein shall not be distributed modified reverse engineered or reproduced in any manner without the prior written authorization of Hannspree or of other third parties The Hannspree logos presented herein are trademarks of Hannspree All other product names trademarks or logos mentioned herein are used for identification purpose only and may be the trademarks or registered trademarks of their respective owners The purchase of the product described herein shall not be deemed to grant either directly or by implication estoppel or otherwise any license under the copyrights patents patent applications or trademarks of Hannspree except for the normal non exclusive use that arises by operation of law in the sale of a product Trademark Notice Hannspree products incorporate High Definition Multimedia Homi Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HANNSpree 7 Se BEA SZ 19EU book Page 8 Thursday April 10 2008 5 31 PM Getting Started 1 1 Package Contents Make sure the following components are included in the box Please contact Hannspree Customer Service immediately if anything is missing or damaged e TV Users manual e Quick start guide Warranty card Power cord Remote control and batteries ME61 According to WEEE regulation this
15. c Contrast 4 Press A W to select an item sD Time Background 5 Press lt or gt to change the mode setting 7 Reset or scales 6 Press MENU to select the changed setting and return to the Setup Menu 7 Press MENU to exit the Setup menu HANNspree 29 va g Ais SZ I9EU book Page 30 Thursday April 10 2008 5 31 PM 8 The Setup menu can be used to adjust the Language TT Language SCART HDMI Scan Info Aspect Dynamic Contrast OSD Time Background Reset settings available nine languages are English Italian Spanish Portuguese French German Russian Polish and Dutch available TT languages are West East Russian Arabic and Farsi SCART sockets selection can be set to AUTO CVBS RGB or S VIDEO When connecting to an HDMI device the TV will be automatically set to display at the full screen size The Aspect ratio can be set to AUTO 4 3 or 16 9 Not for PC mode The Dynamic Contrast can be set to On or Off The OSD Time can be set to 5 10 15 20 25 or 30 Secs The Background can be set to Off or blue Only for TV Select Reset to restore to the default settings nannspree t 4 og SZ I9EU book Page 31 Thursday April 10 2008 5 31 PM Troubleshooting Situation Solution Connect the power cord properly Check if the power LED is on or not Press power on the control panel or rem
16. cum oo SZ 19EU book Page 19 Thursday April 10 2008 5 31 PM 2 2 3 Connecting a VCR STB DVD Player Using Component Video Connect the TV to a VCR STB DVD player using the component video inputs Ur GERENS Audio Cable ra Optional STB DVD 2 Video Cable Optional 2 2 4 Connecting a VCR STB DVD Player Using Composite Video Connect the TV to a VCR STB DVD player using the composite video input Video Cable Optional VCR gt STB DVD Audio Cable Optional Hannspree 19 SZ en 19EU book Page 20 Thursday April 10 2008 5 31 PM 2 2 5 Connecting a Decoder or VCR STB DVD Player Using SCART Connect the TV to a decoder or VCR STB DVD player using the SCART input You can choose to use a SCART cable or adapter for the connection depending on the ports available on your decoder or player tttttttttt SCART IN OUT SCART Cable Optional 2 2 6 Connecting a PC Connect the TV to your PC to use it as the monitor using the VGA port as shown 1 Connect the VGA port of the TV to the VGA output of the PC 2 Connect the line out port of the PC to the PC LINE IN port of your TV to listen to the audio from the PC
17. d This instruction manual is designed to assist you in setting up and using the TV The information in this manual has been carefully checked for accuracy however no guarantee is given to the correctness of the contents The information in this manual is subject to change without notice To the extent allowed by applicable law Hannspree Inc Hannspree shall not be liable for direct indirect special exemplary incidental or consequential damages arising from any defect or omission in this manual even if advised of the possibility of such damages in advance Warranty and Service For complete warranty service information please refer to the Warranty Card enclosed with your TV 6 HANNspree t og SZ en 19EU book Page 7 Thursday April 10 2008 5 31 PM Copyright Copyright 2008 Hannspree Inc All rights reserved This manual is protected by copyright and distributed under licenses restricting its use copying and distribution No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree The TV described in this manual may include copyrighted software of Hannspree or other third parties Hannspree or other third parties preserves the exclusive rights for copyrighted software such as the right to distribute or reproduce the copyrighted software Accordingly and to the extent allowed by applicable law any copyrighted software cont
18. e remote control is not used for a long period remove the batteries and store them properly Handle damaged or leaking batteries carefully and wash hands with soap if they come in contact with leaked chemical fluids If your remote control has two batteries do not mix new and old batteries or the life of the new batteries will be shortened Chemical fluids may leak from the old batteries Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the equipment manufacturer Discard used batteries according to manufacturer s instructions Refer to your local recycling or waste disposal rules and contact a local waste disposal vendor to dispose of used batteries The remote control cover may have a magnet in it so do not place magnetic sensitive items such as watches credit cards or flash media close to the cover Do not use force when pulling the remote control cover open you may damage the hinge HANNSpree 15 t og S om 19EU book Page 16 Thursday April 10 2008 5 31 PM Setting up your TV 2 1 Basic Connections 2 1 1 Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV 2 Insert the plug at the other end of the power cord into a power outlet 2 1 2 Connecting an Antenna or Cable TV Connect one end of the VHF UHF Antenna or CATV cable to TV DTV jack on the rear of the TV Antenna CABLE ANT
19. e video signal cable Make sure the battery is inserted correctly Replace the battery with a new one sure the TV power cord is plugged Remote control doesn t work sure the path between the remote control and the sensor is clear Try operating the remote control at a closer distance to the TV HANNSpree 31 Se BEA SZ 19EU book Page 32 Thursday April 10 2008 5 31 PM Specifications LCD Panel Size 19 inch TFT Screen Format 5 4 Panel Resolution 1280 H x 1024 V TV System ATV PAL SECAM DTV DVB T Video System AV Pal Secam NTSC SCART RGB CVBS S Video HDMI HDTV YPBPR PC VGA Audio System AV HDTV RCA x 2 R L in SCART R L In R L Out HDMI HDMI PC Audio In Phone jack Green Audio out Earphone jack Pink Built in Stereo Amplifier Output 3W x 2 Power Consumption Standby mode under 1W Power on 55W Typical Power Supply AC Input 100V 240V 50Hz 60Hz Weight 4 5kg Max 32 Z2 SZ I9EU book Page 33 Thursday April 10 2008 5 31 PM 5 1 Mode Support Timing Horizontal Vertical Pixel Mode Resolution Frequency Frequency Frequency kHz Hz MHz VGA 60 640x480 60 31 469 59 941 25 175 SVGA 60 800x600 60 37 879 60 317 40 000 XGA 60 1024x768 60 48 363 60
20. elect the Auto Search item to run the channel search 2 3 4 Selecting Programs Press PA on the control panel or remote control to increase the program number Press P V on the control panel or remote control to decrease the program number Enterthe specific program number by pressing the number buttons on the remote control 2 3 5 Adjusting the Volume 1 Press to increase the volume Press VOL to decrease the volume MUTE MUTE 2 2 Press x to eliminate sound and press x again or press the volume buttons to restore the original volume 22 nannspree t gt og en 19EU book Page 23 Thursday April 10 2008 5 31 Adjusting On Screen Display OSD Settings The On Screen Display OSD menu system provides a quick and simple method to adjust the TV settings The OSD menu can be accessed through the buttons either on the control panel or the remote control Before going to details of each OSD item you may get acquainted with the placement of the OSD system CURRENT MENU Displays the title of the currently chosen menu MAIN MENU Displays a list of menu items p Picture Mode Standard The chosen Brightness 50 bs di Micra Contrast ees 1 An color than P Sharpness Iess esst Exit other menu Colour pes items P 1 150 Backlight 2 Colour Temp Standard ADJUSTABLE ITEMS INSTRUCTIONS
21. eo MO Connect to an external device such Input as a VCR STB or a DVD player Component Connect to an external device such Video Inputs gt O a VCR STB a DVD player Connect to an external device such as a VCR STB or a DVD player SCART Input with composite RGB output HAHN Audio Input R L SCARTIN OUT Video Input RGB V S Video Input Audio Output R L Video Output V VGA PC Input VGA Connect to a PC s VGA port Service 9900 SERVICE RS 232 port for service purpose only Not available for users HDMI Input HDMI Connect to devices such as a DVD player or set top box HANNSpree 11 NI SZ I9EU book Page 12 Thursday April 10 2008 5 31 PM Description Connector Function Power Connecter GD ACIN Connect to the provided power cord 1 5 Remote Control Description Icon Function Power 1 Press to turn the or off Source INPUT Press to display the input source list E Use to select a program directly Press 0 Keypad 789 9 to enter the program numbers press 1 0 0 for program 10 Press to display the features contained Pro List Pro LIST For DTV only LAST Press to return to the last channel Last selected informati n INFO Press to display current channel program information Press to turn the on screen display Menu ME
22. ick Start Guide of your TV model HANNSpree 9 Se BEA SZ 19EU book Page 10 Thursday April 10 2008 5 31 PM 1 3 Control Panel Description ICON Function Power 1 Press to turn the on or off Source INPUT Press to display the input source list Menu MENU Press to open the OSD menu Press to increase the program number Program select PA or move upward to the previous item on the OSD menu Press to decrease the program number Program select or move downward to the next item on the OSD menu VOL Press to increase the volume or move to the right on the OSD menu Volume adjust VOL Press to decrease the volume or move to the left on the OSD menu Remote IR Receive incoming remote control sensor commands Power Standby Indicate power or standby status indicator Speakers Deliver high quality sounds 10 nannspree eg SZ 19EU book Page 11 Thursday April 10 2008 5 31 PM 1 4 Input and Output Jacks Description Cable Antenna Connector Function Connect to an antenna or cable TV TV DTV CABLE ANTENNA Connect to earphones or external Earphone Output EAR PHONE speakers with built in amplifier Audio for PC PC LINE IN Connect to a PC s line audio out Input port Connect to an external device such Audio Input gn VCR STB DVD player YPbPr amp CVBS shares one R L Composite Vid
23. llation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus E CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Notes The LCD TV is for entertainment use only and visual display tasks are excluded This device uses a VGA connector to connect to a PC To reduce the influence of main frequency on the source signal use a VGA monitor cable with ferrite shield 4 HANNspree t gt SZ 19EU book Page 5 Thursday April 10 2008 5 31 PM Personal Safety 1 To avoid overloading the power supply never plug too many electrical devices into an outlet power strip or extension cable 2 Dangerous high voltage electric power components are located inside the TV To avoid electric shock do not disassemble the casing 3 Do not place or drop metals
24. ntal Rating to set the channel rate Input the default password 0000 to enter the System Setup window System Setup Parental Rating OFF MENU Exit INFO Help ke Move gt Select MENU Exit INFO Help 44 Move 4 Select Select Time to configure GMT Offset and Summer Time settings GMT Offset Auto Summer Time 4 OFF MENU Exit INFO Help Move Select Note The DTV settings are available when the signal is set to DTV source 28 Hannspree en 19EU book Page 29 Thursday April 10 2008 5 31 PM 3 6 Adjusting PC Setup Settings 1 Press MENU to enter the OSD Main Menu H Position Press to select PC Setup V Position Phase Press gt to enter the PC Setup Menu Clock Press A to select an item a P WON Press lt or gt to change the mode setting or scales 6 Press MENU to select the changed setting and return to the PC Setup Menu 7 Press MENU to exit the PC Setup menu 8 The PC Setup menu can be used to adjust the Auto Adjust H Position V Position Phase and Clock settings Note The PC Setup settings are available when the signal is set to PC source 3 7 Adjusting Setup Settings 1 Press MENU to enter the OSD Main Menu Lige We s Setup Language English screen a TT Language West 2 Press wW to select Setup ec DIS Scan Info Overscan 3 Dress gt to enter the Setup Menu ay Aspect Dynami
25. ote control No picture and sound Press source to cycle through connected video sources Press program up or program down to switch to other TV stations Make sure all cables are connected properly No picture or poor picture Check the antenna and cable connections sound is OK Adjust the brightness in the OSD menus Picture is not in color Adjust the saturation in the OSD menus Make sure the source device is functioning properly Make sure the audio cable is connected securely Turn the mute off Press volume up on the control panel or remote control One of the speakers has Adjust the balance in the Sound OSD menu Picture is OK no sound Sound Cannot receive some TV e Use the Auto Search function in the OSD menu channels using cable TV Want to reset TV settings Use the Reset function in the Setup OSD menu f OSD items are colored in gray the system is in a state menus such that those settings are not available Screen image turns over sure the video signal cable is connected properly Adjust the location of the antenna placing it far from Snow appears on the screen roads or sources of interference Check the antenna and the video signal line connections Readjust the sharpness setting Blurred or overlapped Choose programs with high quality signals images Adjust the direction of the antenna or change th
26. t an item dU Preferred Subtitle English 5 Press lt or gt to change the mode setting or Se scales 6 Press MENU to select the changed setting and return to the DTV Menu 7 Press MENU to exit the DTV menu 8 The DTV menu includes the following options Area Auto Search Manual Search Preferred Audio Preferred Subtitle Parental Lock Parental Rating and Time Settings Press gt to enter the Channel Management item the DTV Channel Manager allows you to organize sort group or delete TV Radio channels Channel Sorting Channel Grouping Delete All TV Channels Delete All Radio Channels area can be set to England Italy France Spain Netherlands Portugal Turkey Poland Russia and Germany default Select Auto Search to activate the automatic TV Radio channel search Channel 38 UHF Progress Notes Itis recommended to use the TV in the listed areas recommend default is Germany if your area is not listed channel reception is not guaranteed if used outside the listed areas HANNspree 27 gt Bib 19EU book Page 28 Thursday April 10 2008 5 31 Select Manual Search to search the TV Radio channels manually Manual Search Channel Name Freq KHz BandWidth Select Parental Lock to change the password The old password is set to 0000 by default Enter New Password Confirm New Password Select Pare
Download Pdf Manuals
Related Search