Philips Professional LCD TV 26HFL5850D
Contents
1. 21 6 16 Set Clock s oane nen and 22 7 Clone configuration 23 7 1 From 23 12 FbromTV te USB oa enter 23 8 Healthcare 24 9 Install system devices 25 9 1 System Smartcard 25 92 System Box tutten 25 9 3 Set communication source 25 10 Trouble shooting 26 10 1 Communication issues 26 10 2 Picture 155 26 10 3 Other issues 26 T1 ndeke nenacia hee eA epu dens 27 EN 1 2008 Koninklijke Philips Electronics rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself Use the TV and accessories only as intended2. VOLUME INDICATOR 2 Press v to select CONFIGURATION gt Displays the volume indicator SECURITY PROGRAM INDICATOR Displays the channel number label or all D PHILIPS SECURITY 4 Press MENU or M to exit SECURITY STANDARD 6 11 2 Set picture or sound settings 1 Enter SETUP menu 2 Press w to select CONFIGURATION gt PICTURE or CONFIGURATION gt SOUND EN 19 Press v to select setting and gt to select options SECURITY Select STANDARD or HIGH STANDARD SETUP menu can be accessed by guest remote control with a security code HIGH SETUP menu can be accessed by setup remote control only KEYBOARD LOCK Select YES ALL or NO YES Lock all the TV s control buttons except POWER button ALL Lock all the TV s control buttons NO Unlock all the TV s control buttons REMOTE CONTROL LOCK Select YES to lock all buttons on the guest remote control AUDIO VIDEO OUT Select TUNER MONITOR or MUTE TUNER Disable audio and video out signal from tuner MONITOR Disable audio and video out signal from monitor MUTE Disable audio and video out signal from all sources USB BREAKIN ON Enable plug and play auto detection of USB devices OFF Disable plug and play auto detection of USB devices EN 20 4 EPG Select YES to enable EPG function TXT MHEG Select TXT ALL or NO TXT Select teletext only ALL Select both teletext or MHEG NO Sel
3. Name channels 18 P Picture settings 19 Power indicator 7 R Recycling 5 Remote colour 24 Remote control 8 basic use 8 batteries 10 lock 20 overview 13 sensor 7 EN 28 Rename channels 18 S Safety 4 SCART 6 Screen care 5 Security 19 high 20 standard 20 SERV U 6 Setup menu 14 with guest mode remote control 14 with setup remote control 14 Side Controls 7 Sound settings 19 SPDIF OUT 6 S VIDEO 7 T Troubleshooting 25 TV 9 antenna 6 connection overview 6 position 9 prepare for digital services 11 setup 14 side controls stand 9 USB 7 VESA 3 compatible wall bracket 9 VGA In 6 VIDEO 7 W Warranty 2 EN 29 PHILIPS 2008 Koninklijke Philips Electronics N V All rights reserved
4. This section describes how to navigate the menus 6 1 6 1 1 Access setup menu With guest mode remote control COIR SOON J 1 Press 3 1 9 7 5 3 and the remote control within 20 seconds to display the SETUP menu Note This is applicable only when SECURITY is set to STANDARD D PHILIPS LANGUAGE SETUP ENGLISH EN 14 6 1 2 With setup remote control 1 Slide the slider at the side of the remote control to SETUP 2 Press M to display the SETUP menu m PHILIPS SETUP LANGUAGE ENGLISH 6 2 Select language 1 Enter SETUP menu 2 Press gt to select ENGLISH FRANCAIS DEUTSCH or ITALIANO B PHILIPS LANGUAGE ENGLISH 3 Press MENU or M to exit 6 3 Select country 1 Enter SETUP menu 2 Press gt to select your country PHILIPS BELGIUM 3 Press MENU or M to exit 6 4 Select communication source 1 Enter SETUP menu 2 Press v to select COMMUNICATION B PHILIPS COMMUNICATION gt 3 Press gt to enter COMMUNICATION 4 Press 4 or gt to select a setting SP SPI SP 12C HM LINK or SERIAL XPRESS Select the type of connection link between the TV and the setup box SMART RC Select to access PAYTV channels via a special remote control Contact your local PHILIPS sales representatives for
5. a Conditional Access Module inserted with a smart card CAM provided by a digital TV service operator The CAM may enable several digital services depending on the operator and services you choose for example pay TV Contact your digital TV service operator for more information about services and terms 4 6 1 Using the Conditional Access Module A WARNING Switch off your TV before inserting a CAM Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your TV 1 Following the directions printed on the CAM gently insert the CAM into the Common Interface slot on the side of the TV N E H 7 li j M 2 2 Push the CAM in as far as it will go N J 3 Switch on the TV and wait for the CAM to be activated This may take several minutes 6 Note Do not remove the CAM from the slot Removing the CAM will deactivate the digital services 4 6 2 Access CAM services 1 Enter SETUP menu 2 Press v to select CONFIGURATION gt SECURITY 3 Press v to select CI CARD and to select YES EN 11 SECURITY D PHILIPS 4 Press MENU or M to exit EN 12 5 Remote control overview Note Remote control is not supplied Purchase remote control no 22AV1105 10 from a Philips authorized supplier This section provides a detailed
6. by the manufacturer e The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips for service or repairs RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Open source software This television contains open source software Philips GBU Hospitality hereby offers to deliver or make available upon request for a charge no more than the cost of physically EN 2 performing source distribution a complete machine readable copy of the corresponding source code on a medium customarily used for software interchange To obtain the source code write to Philips Singapore Pte Ltd Philips GBU Hospitality Software Development Manager 620A Lorong 1 Toa Payoh Singapore 319762 This offer is valid for a period of 3 years after the date of purchase of this product Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 99976 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction C
7. overview of remote control no 22AV1105 10 ee GUIDE M Cae 1 2 i E e SETTINGS SLEEP DTe 5 ALARM ALARM 17 ON OFF 7 8 EXI TELETEXT 16 Oer 9 JIG JCJ Cee CJ CI Cee MHEG PHILIPS TELEVISION w Switches the TV on from standby or back to standby 10 11 12 13 14 15 16 17 18 19 GUIDE Toggles the Electronic Programme Guide on or off Only active with digital channels RADIO Accesses the radio channels SUBTITLE Activates or deactivates subtitles Colour keys Selects tasks teletext pages or sets sleep timer ALARM OFF Deactivates the alarm function Only for models with clock display OK Activates a setting Navigation keys Up A Down v Left 4 and Right keys navigate the menu TELETEXT Toggles teletext on or off P Switches to the next or previous channel Number buttons Selects a channel page or setting T Selects a picture format MHEG CANCEL Cancels digital text or interactive services UK only Mutes or restores sound A l Increases or decreases volume MENU Toggles the menu on or off ALARM ON Activates the alarm function Only for models with clock display PAY TV Accesses the Pay TV channels INFO Accesses the Info channels EN 13 6 Setup the TV On screen menus help you setup and install channels on the TV
8. K SETUP m PHILIPS CLOCK SETUP DISPLAY STANDBY 5 4 Press v to select setting and gt to select options DISPLAY STANDBY Select level 1 to 5 for the brightness of EN 22 the clock display when the TV is in standby mode Select OFF to switch off the display DISPLAY ON Select level 1 to 5 for the brightness of the clock display when the TV is switched on Select OFF to switch off the display TIME SETTING Set the clock Press the number buttons to key in the time TELETEXT TIME DOWNLOAD Select YES to download the time for the clock via teletext The clock will synchronise automatically to the correct time Select NO to deactivate this feature Make download channel equal to startup channel to minimize startup time BUZZER VOLUME Set the volume of the alarm buzzer Select LOW or HIGH Select OFF to switch off buzzer 7 Clone configuration 7 1 From USB to TV Copy TV configuration data from a USB stick to TV 1 Insert the USB stick to the USB connector at the side of the TV 2 Enter Setup menu 3 Press v to selecc SETUP CLONING UPGRADE gt CLONING gt USB TO TV 4 Press gt to enter USB TO TV 5 Press gt to load data to the TV B PHILIPS CLONING TV TO USB gt Note During the process of copying do not remove the USB stick All remote control command and control buttons on the TV are disabled 6 Switch off and then on to reset the TV after clo
9. NU or M to exit 6 10 Name or rename channels 1 Enter SETUP menu 2 Press v to select PROGRAM INSTALL gt LABEL 3 Press gt to move to the next character space and press A or v to select a character A maximum of nine characters can be selected m PHILIPS PROGRAM INSTALL Only available when the INPUT is TUNER 4 Press MENU or M to end naming 5 Press v to select STORE and p to confirm 6 Press MENU or M to exit 6 11 Configure settings 6 11 1 Switch on and OSD setting 1 Enter SETUP menu 2 Press v to selecc CONFIGURATION gt SWITCH ON OSD B PHILIPS PICTURE B PHILIPS SWITCH ON OSD BRIGHTNESS 45 WELCOME MESSAGE gt D PHILIPS SOUND EQUALIZER gt 3 Press v to select setting and gt increase or decrease level or to select options WELCOME MESSAGE Key in or delete the welcome message SWITCH ON PROGRAM Sets a channel at TV setup If STANDARD is selected the TV will switch to the last viewed channel at startup SWITCH ON VOLUME 3 Press v to select setting and gt increase or Sets the volume level at startup decrease level or to select options SMART SETTING KEY selects either icd eai dod SMART SETTING or SPLIT AUDIO Sets the picture format at startup POWER ON Selects the status STANDBY FORCED 12 ON LAST STATUS or ON 6 12 Set security 4 Press MENU or M to exit when switched on 1 Enter SETUP menu
10. Philips Professional and Business Solution 22HFL5550D 26HFL5850D 32HFL5850D 42HFL5850D PHILIPS EN SETUP MANUAL PHILIPS Table of contents 1 amp amp 4 1 1 Safety eicere Pe ee dus 4 12 Screen 5 13 Recycling c RR ome 5 2 YourTM iis hr een 6 2 1 Connection overview 6 3 Remote 8 4 Get started 9 41 Position the 9 42 Wall mount the 9 4 3 Connect the antenna cable 10 44 Connect the mains cord 10 4 5 Insert the remote control batteries 10 4 6 Prepare TV for digital services 11 5 Remote control overview 13 6 amp 14 6 1 Access setup menu 14 62 Select language 14 6 3 Select country 15 6 4 Select communication source 15 6 5 Set number of channels 15 6 6 Install all channels automatically 16 6 7 Install individual channel manually 16 6 8 Switch off sound from audio or video SOUFCB ee LSS ees 18 69 Lock or unlock a channel 18 6 10 Name or rename channels 18 6 11 Configure settings 18 6 12 Set security isin os er S 19 6 13 Set control secs eoo 20 6 14 Video adjustment 21 6 15 Set energy
11. a scart signal NO Disable AUTO SCART feature ALWAYS RGB Select AUTO AV1 NO RGB or NO AUTO Allow RGB insertion in any sources Allow RGB insertion in AV1 EXT1 and other sources NO RGB Disallow RGB insertion in any sources NO Allow RGB insertion in AV1 EXT1 only 6 14 Video adjustment 1 Enter SETUP menu 2 Press v to select CONFIGURATION gt VIDEO ADJUSTMENT B PHILIPS VIDEO ADJUSTMENT HORIZONTAL lt gt 3 Press v to select setting and 4 gt or gt to select options 6 15 Set energy saving 1 Enter SETUP menu 2 Press v to select CONFIGURATION gt ENERGY SAVING D PHILIPS ENERGY SAVING LOW POWER STANDBY FAST 3 Press v to select setting and gt to select options EN 21 LOW POWER STANDBY Define the power consumption in standby mode GREEN The TV will enter a low standby mode to achieve minimum power consumption FAST The TV will enter a semi standby mode to achieve fast power up CLOCK The TV will enter a low standby mode with 12V available for card slot ot setup box ESP Select the period of time to switch off when TV does not receive any command The time is between 1 to 99 hours SMART POWER Selecc LOW MEDIUM HIGH to activate the different levels of energy saving mode or OFF to deactivate the mode 6 16 Set clock 1 Enter SETUP menu 2 Press w to select CLOCK SETUP 3 Press gt to enter CLOC
12. abled See Section 4 6 2 Access CAM services for details 10 2 Picture issues Picture performance not at its optimum when using VGA or EXT 3 source Do not connect a VGA input and a EXT 3 input to the TV at the same time 10 3 Other issues The character F appears on the TV screen This means that the TV is currently in factory mode Press and hold the MENU button at the side of the TV or a few seconds This will reset the TV to normal operation No respond from TV when using guest mode remote control This means that security has been set to HIGH Select CONFIGURATION gt SECURITY Set SECURITY to STANDARD EN 26 11 Index A AUDIO 7 c CAM 11 access 11 Channel fine tune 17 install automatically 16 install manually 16 lock or unlock 18 name 18 options 17 rename 18 scrambled 20 set number 15 card 20 Clock 7 set 22 Common Interface 7 Communication source select 15 set 25 Conditional Access Module 11 Connect 10 antenna cable 10 mains cord 10 Control 20 D DATA 1 6 DATA 2 6 E EMF 2 Energy saving 21 EPG 20 EXT 1 6 EXT 2 6 EXT 3 6 G Get started 9 H HDMI 7 HDMI 1 6 HDMI 2 6 HDMI 3 6 Headphones 7 Healthcare 24 Important information 4 Install system box 25 EN 27 system smartcard 25 K Kensington lock 9 L Loudspeaker mute 24 M MHEG 13 20 Multi 24 Mute 13 N
13. ace of at least four inches around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage Never place the TV or any objects on the power cord Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Never allow children to climb on or play with the TV Place the TV where it cannot be pushed pulled over or knocked down If the TV is transported in temperatures below 5 C Remove the TV from the box Wait until the TV temperature matches the room temperature Install che T V 2 Screen care Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus teletext pages black bars stock market information TV channel logos and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV Risk of damage to the TV screen Never touch push rub or strike the screen with any object To avoid deformation
14. details OFF Select to return to factory default 5 Press v to select ENABLE CARD SLOT 6 Press gt to select YES to enable system card functions See Section 8 2 Set Comminication Source for details 7 Press v to selecc DCM TYPE 8 Press gt to select GENERIC if SP SPI or SP 12C is selected or NO SOURCE SWITCHING if the setup box requires no source switching D PHILIPS COMMUNICATION DCM TYPE GENERIC 9 Press to select STORE 10 Press gt to store all settings 11 Press MENU or M to exit 6 5 Set number of channels 1 Enter SETUP menu 2 Press v to select NO OF PROGRAMS EN 15 m PHILIPS NO OF PROGRAMS gt 3 Press gt to enter NO OF PROGRAMS 4 Press A or v to select TV PAYTV INFO Info channel or RADIO D PHILIPS NO OF PROGRAMS 5 Press the number buttons to set the number of channels for each type of channel Note The maximum total number of channels that you can set for each type of channel is 250 6 Press v to select STORE 7 Press gt to store all settings 8 Press MENU or M to exit 6 6 Install all channels automatically 1 Enter SETUP menu 2 Press v to selecc AUTO INSTALL EN 16 PHILIPS AUTO INSTALL 3 Press gt to start installation The installation may take a few minutes When complete the first tuned channel appears on the TV 6 7 Install individual channel manually 1 Ent
15. ect neither teletext or MHEG CI CARD Select YES to enable Conditional Access Module to work See Section 4 6 Prepare TV for digital services for details Press MENU or M to exit 6 13 Set control 1 2 Enter SETUP menu Press v to select CONFIGURATION gt CONTROL PHILIPS B CONTROL AUDIO VIDEO MUTE YES Press v to select setting and gt to select options AUDIO VIDEO MUTE Select YES to mute the audio or video source if loss of signal transmission occurs SCRAMBLED CHANNEL Select YES and scrambled channels received will be marked as NOT SKIPPED or NO and scrambled channels received will be marked as SKIPPED at auto installation STEP TUNING Select YES to enable tuning for each digit entry DIGIT TIMEOUT Select 1 to 9 9 seconds for a channel to switch to another channel The recommended and default setting is 3 0 seconds 3 DIGIT TUNING Select YES to enable tuning up to 3 digit channels AUTO SCART Select AVI EXT1 AV2 EXT2 ALL POWER SCART or NO Select the AV1 channel when a scart cable is connected to the AV1 connector AV2 Select the AV2 channel when a scart cable is connected to the AV2 connector ALL Select the respective channel when a scart cable is connected to an AV connector POWER SCART Switch on the TV from standby mode automatically when a scart signal is detected Switch the TV to standby mode automatically in the absence of
16. efore installing a System SmartCard or System Box disconnect TV from mains 9 1 System Smartcard Note Not applicable for 22 inch models 1 Insert the SmartCard into the SmartCard slot on the back of the TV L 2 Connect the cables as instructed by the system provider 3 Switch on the TV 9 2 System Box 1 Insert the RJ12 cable of the System box to the DATA 1 connector on the back of the System Box 2 Connect the cables as instructed by the system provider 3 Switch on the TV 9 3 Set communication source The default setting for COMMUNICATION in the SETUP menu is OFF If a SystemCard or System Box is used with this TV then you must set to the correct communication link 1 Enter SETUP menu 2 Press v to selecc COMMUNICATION 3 Press gt to enter COMMUNICATION 4 Press p to select the correct link B PHILIPS COMMUNICATION SP 12C COMMUNICATION 5 Press w to select ENABLE CARD SLOT 6 Press gt to select YES 7 Press A to select STORE 8 Press gt to confirm EN 25 10 Trouble shooting This section describes commonly encountered issues and accompanying solutions 10 1 Communication issues The TV does not communicate with external interactive terminal Select the appropriate communication source See Section 6 4 Set communication source for details e Check that the card slot is en
17. elects WEST EU EAST EU CYRILLIC or GREEK Press MENU or M to return to the previous level Press A or v to select LABEL to name the channel Press gt to move to the next character space and press A or v to selecta character A maximum of nine characters can be selected Press MENU or M to end naming Press v to select STORE and to confirm Press MENU or M to exit EN 17 6 8 Switch off sound from audio or video source Enter SETUP menu Press v to selecc PROGRAM INSTALL MUTE Press gt to switch to NONE switch off sound for audio and video AUDIO switch off sound for audio only or VIDEO switch off sound for video only D PHILIPS PROGRAM INSTALL Only available when the INPUT is TUNER Press v to select STORE and to confirm Press MENU or M to exit 6 9 Lock or unlock a channel 1 2 Enter SETUP menu Press v to selecc PROGRAM INSTALL PROTECTION Press gt to select YES to lock the channel or NO to unlock a locked channel E PHILIPS PROGRAM INSTALL PROTECTION Only available when the INPUT is TUNER EN 18 6 Note When a channel is locked LOCKED will appear on the TV screen You need to unlock the channel before you can access it 4 Press 4 or gt or number buttons to adjust the frequency 5 Press v to select Store 6 Press gt to store the fine tuned channel under the current channel number Stored appears 7 Press ME
18. er SETUP menu 2 Press v to select PROGRAM INSTALL D PHILIPS PROGRAM INSTALL gt 3 Press gt to enter PROGRAM INSTALL B PHILIPS PROGRAM INSTALL PROGRAM NO TV1 Only available when the INPUT is TUNER 4 Press gt to select the type of channel that you want to install TV PAYTV INFO or RADIO 5 Press the number buttons to select a channel number for the type of channel selected PHILIPS PROGRAM INSTALL PROGRAM NO B TV 25 Only available when the INPUT is TUNER 6 Press v to select INPUT B PHILIPS PROGRAM INSTALL INPUT TUNER Only available when the INPUT is TUNER 7 Press gt to select the type of input TUNER AV1 AV2 SIDE AV SIDE SVIDEO CVI CARD CVBS CARD YC CARD CVI VGA HDMI1 HDMI2 HDMI3 or SIDE HDMI 8 Press v to select SYSTEM 9 Press gt to select the type of system WEST EU UK EAST EU FRANCE or DVB T 10 Press v to selecc FREQUENCY 11 Press the number buttons to key in the 12 13 14 15 16 17 18 19 frequency or press gt to start installation of channels The searching will stop once a channel is found Press v to selecc CHANNEL OPTIONS Press gt to enter CHANNEL OPTIONS B PHILIPS CHANNEL OPTIONS FINE TUNE 0 Press v to select FINE TUNE or TELETEXT LANGUAGE FINE TUNE Fine tunes the frequency when reception is bad TELETEXT LANGUAGE S
19. his product must not be detached from the mains cord Copyright VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world All other registered and unregistered trademarks are the property of their respective owners EN 3 1 Important Read and understand all instructions before you use the TV If damage is caused by failure to follow instructions the warranty does not apply 1 1 Safety e Risk of electric shock or fire EN 4 Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips to have the TV checked before use Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from this product at all times Never insert objects into the ventilation slots or other openings on the TV When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the
20. ltage corresponds with the voltage printed at the back of the TV Do not insert the mains cord if the voltage is different 1 Locate the AC IN mains connector at the back or on the bottom of the TV 2 Connect the mains cord to the AC IN mains connector 3 Connect the mains cord to the mains ensuring that the cord is tightly secured at both ends WARNING Before you connect the TV to the power outlet ensure that the power voltage matches the value printed under the cable cover To easily disconnect the TV from the power outlet ensure that you have full access to the power cord at all times When you disconnect the power cord always pull the plug never the cable To connect the mains cord Note The location of the mains connector varies according to TV model EN 10 4 5 Insert the remote control batteries 6 Note Remote control is not supplied Purchase remote control no 22AV1105 10 from a Philips authorized supplier 1 Slide the battery cover off the back of the remote control 2 Insert the two supplied batteries Size AAA LRO3 Be sure the and ends of the batteries line up with the markings inside the case 3 Slide the cover back into position Q Tip Remove the batteries if not using the remote control for an extended period of time 4 6 PrepareTV for digital services Scrambled digital TV channels can be decoded with
21. ning 7 2 FromTV to USB Copy TV configuration data from TV to USB stick 1 Insert the USB stick to the USB connector at the side of the TV 2 Enter Setup menu 3 Press v to select SETUP gt CLONING UPGRADE gt CLONING gt TVTO USB 4 Press gt to enter TV TO USB 5 Press gt to load data to the USB stick D PHILIPS CLONING 6 Note During the process of copying do not remove the USB stick All remote control command and control buttons on the TV are disabled 6 Switch off and then on to reset the TV after cloning EN 23 8 Healthcare Enter SETUP menu Press v to select HEALTHCARE Press gt to enter HEALTHCARE PHILIPS Press v to select setting and gt to select options LOUDSPEAKER MUTE Select ON to switch off the loudspeaker Select OFF to switch on the loudspeaker MULTI RC Select ON to enable TV to respond to multi remote controls This function supports up to four TV sets operating in one room without interference from each other s remote control Each guest remote control must be programmed individually to one of the four colour blue yellow green or red button on the remote control Select OFF to disable this feature REMOTE COLOUR This feature works only when MULTI RC is switched to ON Select Blue Yellow Green or Red to correspond to the colour of the remote control you will be using EN 24 9 Install system devices Caution B
22. nting that results in accident or injury Step 1 Purchase a VESA compatible wall bracket Depending on the size of your TV screen purchase one of the following wall brackets TV VESA compatible wall bracket type mm Special instructions screen size inches cm 22 56 cm Adjustable None 100 x 100 26 l66cm Adjustable None 100 x 200 32 81cm Adjustable 300 x 300 The VESA compatible bracket must be adjusted to 200 x 300 before securing to the TV 42 107cm Fixed 400 x 400 None or larger Step 2 Secure the VESA compatible wall bracket to the TV 1 Locate the four mounting nuts at the back of the TV 2 Continue with the instructions provided with your VESA compatible wall bracket EN 9 NOTE When securing the VESA compatible wall bracket to your TV use M4 bolts for 26 inch models M6 bolts for 32 inch models or M8 bolts for larger models bolts not supplied 4 3 Connect the antenna cable d E A NN of 1 Locate the ANTENNA connector at the back of the TV 2 Connect one end of an antenna cable not supplied to the ANTENNA connector Use an adaptor if the antenna cable does not fit 3 Connect the other end of the antenna cable to your antenna outlet ensuring that the cable is tightly secured at both ends 4 4 Connect the mains cord A WARNING Verify that your mains vo
23. ompliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on t
24. power cord can loosen connections and cause arcing Risk of short circuit or fire Never expose the remote control or batteries to rain water or excessive heat Avoid force coming on the power plugs Power plugs that are partly loosened can cause arcing or fire Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 55 Ibs f you stand mount the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the weight of the TV and stand The TV must be mounted on the wall bracket designed for this TV and on a wall that can safely hold the weight of the TV Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident or injury Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the mounting surface Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to a suitable support such as a concrete wall Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating Never install the TV in a confined space such as a bookcase Always leave a sp
25. r 5 Remote control overview Guest mode remote control For setup and configuration purposes SETTINGS SLEEP ALARM ALARM ON TELETEXT 3162 DODE e DE PHILIPS EN 8 Setup remote control This remote control may be purchased separately for Institutional TV Professional and Business Solutions features and SmartCard settings TEXT SMART SLEI m 0 E 6 Jeeoeo o m PHILIPS 4 Get started This section helps you position and install the TV 41 Position the TV In addition to reading and understanding the safety instructions in Section 1 1 consider the following before positioning your TV e The ideal viewing distance for watching TV is three times its screen size Position the TV where light does not fall on the screen e Connect your devices before you position your TV Your TV is equipped with a Kensington Security Slot at the back of the TV If connecting an anti theft Kensington lock not supplied position the TV within reach of a permanent object such as a table that can be easily attached to the lock 4 2 Wall mount the TV WARNING Wall mounting of the TV should only be performed by qualified installers Koninklijke Philips Electronics N V bears no responsibility for improper mou
26. r for service use do not insert the headphones here EN 6 10 11 12 13 HDMI 1 2 3 HDMI input connectors for Blu ray disc players digital receivers game consoles and other high definition devices AUDIO IN Mini jack connector for PC audio in when connecting a PC via DVI HDMI adaptor TV ANTENNA Smart Card slot Slot for compatible 32 pin smart card VGA In Input connectors for PC or other devices DATA 1 RJ 12 Port for system terminal connection DATA 2 RJ 45 Port for system terminal connection 8 O0 1d Connector for bathroom speaker Use a stereo jack 14 15 16 17 18 19 20 1 Headphones Stereo mini jack AUDIO L R Audio L R input connectors for composite and S Video devices VIDEO Video input connector for composite devices S VIDEO S Video input connector for S Video devices USB USB connector for storage devices HDMI Additional HDMI connector for mobile high definition devices COMMOM INTERFACE Slot for Conditional Access Modules Note Refer to the user manuals for the respective devices for details of connection 2 1 1 Side controls and indicators M 1 POWER 2 PROGRAM wu A ow MENU VOLUME Power indicator remote control sensor Clock EN 7 3 Remote control For advanced information about the remote control see Chapte
27. s and colour fading wipe off water drops as soon as possible 3 Recycling This product is designed and manufactured with high quality materials and components which can be recycled and reused This product is designed and manufactured for material recycling When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC Never dispose this product with other household waste Inform yourself or ask your dealer about local environmentally safe recycling regulations The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health The remote control supplied with this product operates on batteries covered by the European Directive 2006 66 EC and cannot be disposed with normal household waste Inform yourself about the local regulations on the separate collection of batteries EN 5 Your TV Connection overview mmm nir o EXT 1 First SCART connector for DVD players VCRs digital receivers game consoles and other SCART devices Supports Audio L R CVBS in out RGB EXT 2 Second SCART connector Supports Audio L R CVBS in out EXT 3 Component video Y Pb Pr and Audio L R input connectors for DVD players SPDIF OUT Sound output connectors for home theatres or other audio systems SERV U Connecto
Download Pdf Manuals
Related Search