Home

Samsung T260HD

1. e Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the Brightness and Contrast by using the OSD menu MENU gt 4 3 l a 3 MENU EXIT Contrast Brightness Sharpness Not available in MagicBright mode of Dynamic Contrast You can use the on screen menus to change the contrast and brightness according to personal prefer ence e Contrast Adjust the Contrast e Brightness Adjust the Brightness e Sharpness Adjust the Sharpness MENU gt a Fa a H MENU EXIT Auto Adjustment The values of Fine Coarse and Position are adjusted automatically Adjusting the Monitor By changing the resolution in the control panel auto function is performed Available in PC Mode Only MENU gt a gt s MENU EXIT Screen Available in PC mode only Coarse Fine e Coarse Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu e Fine Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed MENU gt gt a gt H S8 gt a F 4 H MENU EXIT Position Adjusts the screen location horizontally and v
2. LI When using a fixed screen for a long time an afterimage or stain may occur e Ifyou are not using your product for a long period of time put it into sleep mode or use a moving screen saver J Set a resolution and frequency appropriate to the product e Otherwise your eyesight may be damaged LI When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing 3 If you continually move closer to the product screen your eyesight may be failing LI To ease eye strain take at least a five minute break after every hour of using the monitor O Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product e If you use the product in a location exposed to vibrations it may damage the product and result in fire LJ When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the product e Otherwise it may result in electric shock or fire J Ensure that children do not hang onto the product or climb up onto the product e The product may fall and cause personal injury or death L If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may resu
3. e Recommended settings Bright colors with little difference in luminance e Change the characters color and background color every 30 minutes Ex e Every 30 minutes change the characters with movement SYSTEM 245 SYSTEM 245 STATUS OK STATUS OK Ex AA Ka PATA KA1710 12 00 KA1710 12 00 ma PA 77 14 15 UA0110 13 30 11AN110 12 20 AA0002 14 00 FA7777 14 15 ba The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Information Image retention may not occur when a LCD panel is operated under normal conditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Common Electrode ITO Black Matrix Color F ilter Data Gate TFT Pixel Electrode Storage Capacitor Bus Line ITO Cs b3 Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to
4. Connect the DIGITAL AUDIO OUT OPTICAL terminal of your monitor to the digital sound input terminal of your digital amplifier using an optical cable Connections 2 Set the Internal Mute On in the Sound menu using the MENU button 3 Adjust the sound volume using the Volume button of your amplifier 4 Ifthe connections are set up power up your monitor and amplifier Note e If no sound is emitted from the monitor you need to use an amplifier e For information on how to connect a speaker and amplifier refer to the respective user manuals provided by their manufacturers Connecting Headphone Note You may connect your headphones to the monitor e Connect your headphones to the Headphone connection terminal Using the Stand Monitor Assembly Monitor and Bottom Connections Tilt angle Nn Note You can tilt the monitor upwards at an angle of 1 to 21 Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Wind
5. Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property damage Make sure to read the instructions carefully and use the product in the correct manner a Warning Caution Otherwise it may result in death or personal injury Otherwise it may result in personal injury or property damage O Notational Conventions Important to read and under Prohibited stand at all times Do not disassemble Disconnect the plug from the outlet Ground to prevent an electric Do not touch Shock GAS A When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions 2 J Sh Gb Ba e Otherwise this may result in electric shock or fire L Do not use a damaged power cord or plug or a damaged or loose power outlet L Do not touch the power plug with wet hands when removing or plug ng ging the plug into the outlet Q Ri e Otherwise this may result in electric shock p LJ Make sure to connect the power cord to a grounded power outlet GN e Otherwise it may result in electric shock or personal injury 4 Installation Safety Instructions L Ensure that the power plug is plugged into the power outlet firmly and correctly
6. Note Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies that are supported by the monitor Maintenance and Cleaning 1 Maintaining the Monitor Case Clean with a soft cloth after disconnecting the power cord Troubleshooting e Do not use benzene thinner or other flammable substan ces or a wet cloth e We recommend a Samsung cleansing agent is used to pre vent damage to the screen 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel smoothly e Never use acetone benzene or thinner 9 They may cause flaws or deformation of the screen sur B face e The user will be required to pay costs and related expenses for repair of damages caused by improper cleaning and usage Symptoms and Recommended Actions Note A monitor recreates visual signals received from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the SOURCE of the problem and then contact a service center or your dealer 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an after service for the main board of the computer 3 If you installed a new video card or if you assembled the PC check if you
7. 23173 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 FF VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 IT VESA 800 x 600 46 875 75 000 49 500 HF VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 FT VESA 1280 x 960 60 000 60 000 108 000 FF VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 T VESA 1600 x 1200 75 000 60 000 162 000 FIT VESA 1920 x 1200 74 038 59 950 154 000 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Pa i Tac i i I K amp pl E Lo Nag KI Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency ofthis repetition is called the Vertical Frequency or Refresh Rate Unit Hz General General Model Name SyncMaster T260HD Specifications LCD Panel
8. D driver then click OK button Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dia logue box Microsoft Windows NT Operating System l PA Click Start Settings Control Panel and then double click Display icon In Display Registration Information window click Settings Tab and then click All Display Modes Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file l 2 10 Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You c
9. I watch HD broadcasting with all digital TVs You can receive all digital broadcasts whether they are SD or HD using any digital TV How ever you cannot enjoy HD programs which are the highest quality digital TV programs using an SD digital TV Especially as SD broadcasting has an aspect ratio of 4 3 HD broadcasting has an aspect ratio of 16 9 similar to a cinema screen Therefore to enjoy the full benefits of digital TV it is better to purchase an HD digital TV At present all digital TVs from Samsung Electronics have the 16 9 wide aspect ratio Can I watch digital TV broadcasting with an analog TV No The analog TV cannot interpret digital signals Therefore a digital TV 1s required to watch digital TV broadcasting Can I use my present antenna to receive digital broadcasting As for existing analog TV digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas If signal reception is very good in your environment you can watch digital broadcasts with your existing indoor antenna If not it is better to install an outdoor UHF antenna How do I connect an antenna for an apartment or tenement house Consult the superintendent s office or broadcasting facility administrator for your apartment or tenement house to check whether UHF reception is available Even if digital TV broadcasting is available in your area if you cannot watch it because the superintendent s offi
10. Prana 4 70 70 19 70 0818 717 100 030 6227 515 3260 SAMSUNG E 0 15 Min 08 25 08 65 65 0 15 Min http www samsung com dk http www samsung com ie http www samsung com fi http www samsung com GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND Appendix Europe 01805 SAMSUNG 726 7864 http www samsung com 0 14 Min 06 80 SAMSUNG 726 7864 http www samsung com 800 SAMSUNG 726 7864 0035 0 2 261 03 710 http www samsung com http www samsung com be 0900 SAMSUNG 726 7864 http www samsung com nl 0 10 Min 815 56 480 0 801 801 881 022 607 93 33 80820 SAMSUNG 726 7864 0800 SAMSUNG 726 7864 902 10 11 30 0771 400 200 0800 SAMSUNG 726 7864 0845 SAMSUNG 7267864 CIS 800 7267 800 7267 8 800 77777 8 10 800 500 55 500 00 800 500 55 500 8 800 555 55 55 8 10 800 500 55 500 8 800 502 0000 8 10 800 500 55 500 Asia Pacific 1300 362 603 800 810 5858 010 6475 1880 3698 4698 3030 8282 1800 110011 0800 112 8888 0120 327 527 1800 88 9999 0800 SAMSUNG 726 7864 http www samsung com no http www samsung com pl http www samsung com pt http www samsung com sk htt
11. Text2 are not sufficient MENU sa gt Sa H Ga kso gt T 2 MENU EXIT Adjusting the Monitor Digital Caption Options Size Default Smart Standard Large Font Style Default Style0 Stylel Style2 Style3 Style4 Style5 Style6 Style7 Foreground Color Default White Black Red Green Blue Yellow Magenta Cyan Background Color Default White Black Red Green Blue Yellow Magenta Cyan Foreground Opacity Default Transparent Translucent Solid Flashing Background Opacity Default Transparent Translucent Solid Flashing Return to Default MENU sa gt ta T H Ga F HS Ga F MENU EXIT Note Digital Caption Options are available only when Service1 Service6 can be selected in Caption Mode Servicel Service6 in digital caption mode may not be available depending on the broadcast Adjusting the Monitor Melody A melody sound can be set to come on when the monitor is powered On or Off e Off Turns off the melody function e Low Sets the melody volume to low e Medium Sets the melody volume to medium e High Sets the melody volume to high MENU gt 4 gt fl gt H a MENU EXIT Light Effect You can turn on off the LED on the front of monitor according to the situation Use it for saving power or when the LED dazzles your eyes e Off LED will not come on e In Standby T
12. at the back of the product may vary from product to product POWER POWER Connect the power cord for your monitor to the POWER port on the back of the product Pc Introduction PC Connect the PC terminal at the back of your monitor to your computer HDMI PC DVI D AUDIO IN DIGITAL AUDIO OUT OP TICAL EX LINK HDMI PC DVI D AUDIO IN Connect the HDMI PC DVI D AUDIO IN ter minal at the back of your product to your com puter s sound card DIGITAL AUDIO OUT OPTICAL Connect the DIGITAL AUDIO OUT OPTI CAL terminal of your product to the digital sound output or standard sound output terminal of the DVD home theater or amplifier using a digital audio optical output cable G EX LINK This 1s a reserved terminal used for servicing SERVICE SERVICE Q SERVICE This is a reserved terminal used for servicing DVI D DVI D Connect the DVI cable to the DVI D port on the back of your product o T Kensington Lock Introduction The Kensington Lock is a device used to phys ically fix the system when using it in a public place The locking device has to be purchased separately The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased separately Note The location of the Kensington Lock may be
13. dif ferent depending on its model Using the Anti Theft Kensington Lock 1 Insert the locking device into the Kensington slot on the Monitor and turn it in the locking direction AN 2 Connect the Kensington Lock cable 3 Fix the Kensington Lock to a desk or a heavy stationary object HDMIIN 1 2 HDMIIN 1 Connect the HDMI IN 1 terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable R AUDIO 1 Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the product Pr Pg Y Connect the VIDEO OUT port of the DVD DTV Set Top Box to the Pr Pz Y input ports using a component video cable Pp Pp Y ANTIN Introduction Connect the CATV cable or TV antenna cable to the ANT IN port on the rear side of the prod uct Make sure to use a TV antenna cable sold separately as the antenna cable HDMTIN 2 Connect the HDMI IN 2 terminal at the back of your product to the HDMI terminal of your digital output device using a HDMI cable Oka Connect your headphones to the Headphone con nection terminal Note See Connecting Cables for further information regarding cable connections Cable holding ring e Fix the cables using the holding ring as shown in the figure Remote Control SAMSUNG 1 POWER 2 0 TV 3 Number Buttons 4 button 5 VOL 6 TOOLS 7 79 4 D
14. electric shock or fire CJ Do not try to move the monitor by pulling only the wire or the signal cable e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable IL Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables e Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable J Make sure that the ventilating opening is not blocked by a table or curtain e Otherwise it may result in fire due to an increase in the internal tem perature CJ Do not place any containers containing water vases flowerpots med icines as well as any metal on the product e Ifwater or a foreign material enters the product disconnect the power cord and contact a Service Center e This may result in a product malfunction electric shock or fire L Do not use or keep combustible spray or flammable material near the product e Otherwise this may result in an explosion or fire L Do not insert any metal such as chopsticks coins pins and steel or flammable objects such as matches or paper inside the product through the ventilating openings input and output terminals etc e If water or foreign material enters the product disconnect the power cord and contact a Service Center e Otherwise this may result in electric shock or fire Safety Instructions
15. it may fall and result in personal injury and or damage to the product L Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater e This may reduce the lifetime of the product and may result in fire L Do not drop any objects onto the product or cause any impact to the product e Otherwise this may result in electric shock or fire J Do not use a humidifier or kitchen table near the product e Otherwise this may result in electric shock or fire LI When there is a gas leak do not touch the product or the power plug but ventilate immediately e Ifa spark occurs it may cause an explosion or fire J If the product has been turned on for a long time the display panel becomes hot Do not touch it Safety Instructions VI L Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or fingers may be come caught e Also if you tilt the product too far it may fall and cause personal injury L Do not install the product in a location low enough for children to reach e Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface L Do not put any heavy objects on the product e This may result in personal injury and or damage to the product E When using the product use it in the correct p
16. related to Screen Note Problems related to the monitor screen and their solutions are listed Q A LA y Q Q 2 F O pr Screen 1s blank and power indicator is off Ensure that the power cord is firmly connected and the LCD monitor is on Refer to the Con necting the monitor Check Signal Cable message Ensure that the signal cable is firmly connected to the PC or video SOURCEs Refer to the Connecting the monitor Ensure that the PC or video SOURCE s are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video adapter Compare these values with the data in the Preset Timing Modes Chart Picture rolls vertically Check if the signal cable is securely connected Connect it again securely Refer to Connecting the monitor Image is not clear Picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set resolution and frequency to the recommended ranges gt O Bp fF O F O m o Troubleshooting Picture image is unstable and vibrates Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor If not reset them referring to the current Information under the monitor menu and Preset Timing Modes The image is too light or too dark Adjust the Brightness and Contrast Refer to the Brightness Contras
17. system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature State Normal Operation Power saving mode Power off Power button EPA ENERGY 2000 Power Indicator On Blinking Off Power Consump Less than 54 watts Less than 2 watts Less than 1 watts tion This monitor is EPA ENERGY STAR compliant and EN ERGY2000 compliant when used with a computer equipped with VESA DPM functionality Asan ENERGY STAR Partner SAMSUNG has determined ENERGY STAR that this product meets the ENERGY STAR guidelines for energy efficiency Specifications Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086
18. the number of TFT LCD sub pixels contained in this product are 6 912 000 a When cleaning the monitor and the panel outside please apply the recommended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment func tion b3 When viewing a fixed screen for an extended period of time a residual image or blur g p g riness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time ta Do not display a still image such as on a video game or when hooking up a DVD to this LCD TV on the Color TFT LCD Thin Film Transister Liquid Crystal Display panel for a long time as it can cause screen image retention This image retention is also known as screen burn To avoid such image retention reduce the degree of brightness and con trast of this screen when displaying a still image Watching Digital Broadcasting Correctly Digital 16 9 HD Broadcast Digital SD Broadcasting Digital 4 3 Broadcasting ing Screen Screen Screen This screen is shown when This sc
19. when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention Power Off Screen Saver or Power Save Mode Ex e Turn the power off when using a stationary pattern e Turn the power off for 4 hours after 20 hours in use e Turn the power off for 2 hours after 12 hours in use e Use a Screen saver if possible e Screen saver in one color or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme Suggestions for specific applications Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recom mend that you follow set up of your display system program as below Display Information together with Logo or Moving image cycle Information Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute D Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 minutes Type 1 Type 1 FLGHT TIME FLGHT TIME FRET a4 5 EXE EE UA102 21 10 UA102 21 10 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference in luminance Black amp White Grey Ex SYSTEM 245
20. Adjusting the Monitor MENU s a Kot a 4 MENU EXIT Film Mode The Film Mode feature offers you a theater quality viewing experience Film mode is supported in TV Component 480i 1080i and HDMI 480i 1080i Off Auto MENU gt gt a Fa As 2 MENU EXIT Reset Picture parameters are replaced with the factory default values e OK e Cancel MENU gt Fa gt gt 4 MENU EXIT Sound Available Modes J pec DvI filtv Adjusting the Monitor 4 Component HDMI Note The default setting may be different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Mode The Monitor has a built in high fidelity stereo amplifier e Standard Choose Standard for the standard factory settings e Music Choose Music when watching music videos or concerts e Movie Choose Movie when viewing movies e Speech Choose Speech when watching a show that is mostly dialogue 1 e news e Custom Choose Custom if you want to adjust the settings according to personal preference MENU sa gt St a F MENU EXIT Adjusting the Monitor Equalizer LALY You can adjust the left and right sound balance and the low or high volume as required MENU sa gt Sa gt H a 4 gt MENU EXIT Multi Trac
21. Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINE BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP DOMINICA TRINIDAD amp TO BAGO VENEZUELA AUSTRIA BELGIUM CZECH REPUBLIC DENMARK EIRE FINLAND FRANCE North America 1 800 SAMSUNG 726 7864 1 800 SAMSUNG 726 7864 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 7919267 1 800 234 7267 00 1800 5077267 800 7267 1 800 682 3180 1 800 751 2676 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe 0800 SAMSUNG 726 7864 0032 0 2 201 24 18 844 000 844 Distributor pro Ceskou republiku http www samsung com http www samsung com ca http www samsung com http www samsung com ar http www samsung com http www samsung com cl http www samsung com co http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com latin http www samsung com at http www samsung com be http www samsung com cz Samsung Zrt Ceska organiza n slo ka yskocilova 4 14000
22. Size 25 5 inch 64 cm Display area 550 08 mm H x 343 8 mm V Pixel Pitch 0 282 mm H x 0 282 mm V Synchronization Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 2M Resolution Optimum resolution 1920 x 1200 60 Hz Maximum resolution 1920 x 1200 60 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface 0 7 Vp p 5 separate H V sync Composite TTL level V high gt 2 0 V V low 2 0 8 V Maximum Pixel Clock 162 000 MHz Analog Digital Power Supply AC 100 240 V 10 Yo 50 60 Hz 3 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight 610 x 435 x 86 5 mm 24 0 X 17 1 X 3 4 inch Without Stand 610 x 502 5 x 245 mm 24 0 X 19 8 X 9 6 inch With Stand 8 6 kg 19 0 Ibs Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Specifications Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufact
23. V programs may include movies entertainment and educational programs Different from cable TV CATV can be viewed only within the area in which the CATV service 1s offered VHF indicates TV channels 2 to 13 and UHF indicates channels 14 through 69 This feature allows the viewer to fine tune the TV channel to ob tain the best viewing conditions The Samsung LCD TV has both automatic and manual channel fine tuning features to enable the viewer to adjust their desired settings External device input refers to video input from such external vid eo devices as VCRs camcorders and DVD players separate from a TV broadcast A type of digital disk technology that takes up only the benefits of CD and LD to implement a high resolution quality which en ables the user to enjoy clearer images An enhanced broadcasting technology to process digital video signals using a set top box which implements a high resolution and clearer digital images on the screen This derives from artificial satellite technology that amplifies weak signals even in poor reception areas for sharper images A connection part that is used to link a Wide antenna cable feeder cable to the TV A kind of language selection feature that provides English subti tles caption or character information services from broadcasting services ex AFKN or video tapes marked CC and which are especially useful for studying English This enables the user to enjoy the b
24. VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 eels VESA 1280 x 1024 79 976 75 025 135 000 ar an VESA 1600 x 1200 75 000 60 000 162 000 VESA 1920 x 1200 74 038 59 950 154 000 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally 1s called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency Unit kHz Ho 9 a nG i gt rl dey Bo Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Information For Better Display ba Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen 1f the best picture quality 1s not provided for TFT LCD e Resolution 1920 x 1200 e Vertical frequency refresh rate 60 Hz ba TFT LCD panels manufactured by using advanced semiconductor technology with a precision of Ippm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems e For example
25. XIT Timer1 Timer2 Timer3 You can set the monitor to be turned on or off automatically at a specified time Note Setting the clock is necessary in order to use the various timer features of the product Three different On Off Timer Settings can be made MENU sa gt lt a 12o Ga Fo IH a T aye MENU EXIT V Chip Protects children from viewing inappropriate programs by blocking certain broadcast or AV programs More Information e Parental restriction levels differ depending on the broadcasting station e The default menu name and Downloadable US rating change depending on the downloaded in formation Adjusting the Monitor e Even if you set the On screen display to your desired language the Downloadable U S Rating menu will appear in English only e The rating will automatically block certain categories that are more restrictive e The rating titles For example Humor Level etc and TV ratings For example DH MH H etc may differ depending on the broadcasting station e Ifyou forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 Power Off Mute 8 2 4 Power On V Chip Lock Off On MENU sa gt H Sa T H tt ll gt a H MENU EXIT TV Parental Guidelines MENU sa gt H Sa T H Ga Ko Sa F a lH ss MENU EXIT Adjusting the Monitor MPAA Rating MENU
26. a a Aa ces th aan atang Pa ad nach ra me panay ot Ti areata Pa dee Labret Drag the icons to match your monitors Re i Thug ig my main maagor EE the desktop onto the montor Ta a PP PA PP PIA TASA PIPES TES AS SASA PASSASSASI Using the Software 1 Insert CD into the CD ROM drive 2 Click Start Control Panel then click the Appearance and Themes icon pr mtarmaek ae Pape Deu ae lt Interret Capo a E mail la Mie Boece Cece Sutin Caprese Piei Pm Pete Ea rae mr eT pon ES may Pussi There oh reeset mesg ene ae eee Kieko pod is Bi foci ail sail phere Woon 3 i To Ra ae Ree Pair fron larga mail perl KEN namana media Mayor ue we MSH aplorar SoB tits and Support aT mma mai lis irs sas ll pipe Pu Saar a nde Moro Hal T pun a Palanas a sd ara LA os EF 3 Click Display icon and choose the Settings tab then click Advanced Be EF Ga Agere a eh Gum D tl cima del F a keg a di a lag kg E a aa F ksp Naka a Dagsa or pick a Control Panel icon Pig ami Play Mamita on 3G Prophe Ill 1 z r Sen deed y y Enka pasy Ti baa OP teks ymaa Lao ih ca Mone Hikghana az kat i u s fjet eita TENESI TOZA by FES pale a 4 Click the Properties button on the Monitor tab and select Driver tab Plug and Play Monitor and SO Prophet IN Properthe Geforces Selection 2 Cole Comection eens asen Monitor Troubleshoot Color M
27. act the hardware vendor for software that has passed Windows Logo testing Continue Argway STOP Inetallstion Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wirand The waciard kar Arah mabaling the softerane bai a Sarigung mawa het Fah lo diria the vated Dara Caner po Samsung awa Diyes Proenlei Diyes Dake Dumas Yaaay Digtal Sipra Ora ala Bol Back Driver Urena Samung 8 7 14200 TOO Mot pal signed To weew dakal aboul ho dire flow Tit Lael thee ches lod then dene if the dosa kada ator upang iho dies rool bab bo iha pisyrnaik mababad chorea Ta urate tha dna de arco L Chee Cf 10 Using the Software Plog and Play Monitor and A Prophet WP roporiies Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps l pA 3 Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install 10 Click Start Setting Control Panel Double cl
28. an enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window You have finished setting up your monitor Execute X Window after setting other requested hardware Using the Software Natural Color Natural Color Software Program Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyright 2003 Samsung Electronics Ca Ltd One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system de veloped by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images For more information refer to Help F1 in the software program How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD ROM Drive Then the initial screen of the program Natural Color will be executed Click Natural Color on the initial screen to install the Natural Color software To install the pr
29. anagement Mina HA Pag and Pl Monitor gro cette Bowen abah vate ED Hans o C Hide madai that this morilos carrot daplay Chara thea cheek baa aller pu lo melect dapa nodai acana n me E Ais ma TH maa a e Device ube iiaa ha ic rakai 5 Click Update Driver and select Install from a list or then click Next button Flug and log Monitor Pinja r ihis rales Hardware Update Wizard Welcome to the Hardware Update Wizard This wizard heip you install nawewe bor Pliny are Play Morator GS 1 2001 0 Ang ng ira ia di app dak inani il nine To aa akala aland Wee hira Pa What do pou ara the varad lo do To ais iha chives tor ihis device ma CO Iniba the pola tatatak Recorded Hcl Pack Driver LIANG PAG eee ee Hul CH me CC ina To aminado Bs kines araro kek Mest lo Continue CC ie 6 Select Don t search I will then click Next and then click Have disk Using the Software Hardware Update Wizard Fies chose pug poarch and indlallabon optine D Seach ka the best diva in Bese ocat Le the chk Exon bak bo kai or apan the default search hoh includsi boa pathi bie eerie abe ees The bani deo lourd ball be ralaled 2 Dont search vall choose the drva ba akal Choose this option ko pedi the devane draa homa let Wirda doe mot gusLanias thst ha den pou chee ell ba Shs bagi match kor pour hace Mardaro Update Wizard Setent the devine diver pou w
30. ant bo inshalla this hardware 7 Celso the marulectaer are maka af pour hardware devas and then chek Hasi Il you hase a dak that panang tha disas acu yant bo Pakal check Hawa Diik lr gompahbla kanayang Montel Pag Phap ard Plage cara a That draw Ni gpl piril Talma wiu eet amna i Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Install From Disk lisent Ihe marulachaei s matallabon dik and then make sue that the conect dive k selected below Ea Copy manulachuner s es brome Hardware Update Wizard Select the device diver you want bo inaladi bor thie hardisasn Tolasi the Pamatin aed maka of oun hadaa reece cere an h deed IN pa havs a dak Phat contend hho dosi ecu mae bo imba chek Hawa Dok Modd Samsung sex Pa This dera ka pent clagutally signed Tal ma veh dayan marina i moalari get Jets cano If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The sofware pou are installing Ice this hencevare Sarigung sara has nal pated Writes Logo bating lo wendy it compabbdiy wth Winar AP Dell a wak thig bagting t paiba Continuing your installation of this sofbware mag impair or destabilize the comect operation of your system eather immediately of m the future Moecropolt strongly recommends thal pou stop this inttallalion now and coni
31. antenna cable e When using an outdoor antenna If you are using an outdoor antenna use a professional for installation if possible e To connect the RF cable to the antenna input terminal Keep the copper wire portion of the RF cable straight 2 Turn on the monitor 3 Select TV using the TV DTV 4 Select a desired TV channel Note Is weak signal causing poor reception Purchase and install a signal amplifier for better reception Connecting DVD DTV Set Top Box P note Connect to the DVD DTV Set Top Box input if the device has a COMPONENT IN connector You can watch Component simply by hooking up the Component with the monitor as long as the power is on Connections E WER OT Ov i e OF l IE C1 i O Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L port of the monitor O Connect the VIDEO OUT port of the DVD DTV Set Top Box to the Pp Pp Y input ports using a component video cable Pp Pp Y ui Note Select Component using the SOURCE Sy If you connect the Pp Pp and Y component cables to the incorrect terminals the screen will be displayed in red or blue For single family houses install an UHF antenna to receive digital broadcasting Connecting HDMI Note You can connect digital output devices to your monitor You can enjoy better screen and sound quality 1 Connecting Using a HDMI Cable a E eeE e Input d
32. cator On Blinking Off Power Consump Less than 54 watts Less than 2 watts Less than 1 watts tion This monitor is EPA ENERGY STAR compliant and EN ERGY2000 compliant when used with a computer equipped with VESA DPM functionality Asan ENERGY STAR Partner SAMSUNG has determined NAAN that this product meets the ENERGY STAR guidelines for 3 energy efficiency Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED 1s on Refer to the video card manual and adjusts the screen as follows Specifications Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V kHz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 HT VESA 800 x 600 48 077 72 188 50 000 rE VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 HF VESA 1152 x 864 67 500 75 000 108 000 Tar
33. ce or common broadcasting facility does not rebroadcast the signal you have to install an indoor or outdoor antenna Alternatively your local cable broadcasting company provides a digital TV service and you can subscribe to it Troubleshooting A Ifa cable broadcasting company is sharing a common broadcasting facility for your apartment or tenement house it has to adjust and send digital TV signals so that they are compatible to shared viewing which is the original purpose of the common broadcasting facility Specifications General General Model Name SyncMaster T240HD LCD Panel Size 24 inch 61 cm Display area 518 4 mm H x 324 0 mm V Pixel Pitch 0 258 mm H x 0 258 mm V Synchronization Horizontal 30 81 kHz Vertical 56 75 Hz Display Color 16 2M Resolution Optimum resolution 1920 x 1200 60 Hz Maximum resolution 1920 x 1200 60 Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface 0 7 Vp p 5 separate H V sync Composite TTL level V high gt 2 0 V V low 2 0 8 V Maximum Pixel Clock 162 000 MHz Analog Digital Power Supply AC 100 240 V 10 Yo 50 60 Hz 3 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight 573 x 409 x 87 mm 22 6 X 16 1 X 3 4 inch Without Stand 573 x 477 x 245 mm 22 6 X 18 8 X 9 6 inch With Stand 7 3 kg 16 1 Ibs Environmental considerations Opera
34. ces that are connected to the monitor at the time This button is used to return to the immediately previous channel In TV mode selects TV channels Adjusts the audio volume Returns to the previous menu Activates a highlighted menu item Exits from the menu screen Not Available Press to switch to your favorite channels Press to change the screen size PC DVI mode Wide 4 3 TV Component mode Wide 16 9 Zoom1 Zoom 4 3 HDMI mode Wide 16 9 Wide Fit 4 3 Just Scan Connections Connecting Cables Connecting to a Computer if bh 4 OOO ue i O Connect the power cord for your monitor to the POWER port on the back of the monitor Plug the power cord for the monitor into a nearby outlet 2 Use a connection appropriate for your computer Using the D sub Analog connector on the video card e Connect the signal cable to the PC port on the back of your monitor Using the DVI Digital connector on the video card e Connect the DVI Cable to the DVI D Port on the back of your Monitor Connect the HDMI PC DVI D AUDIO IN port on the rear side of the monitor to the sound card of the PC Note e You may enjoy clear and quality sound from the computer sound card using the monitor speakers You don t need to install any separate speakers for your computer e You may get a blank screen depending on the type of video card you are using if you connect simultaneou
35. cture to fit the entire screen 4 3 Sets the picture to 4 3 normal mode Just Scan Use the function to see the full image without any cut off when HDMI 4801 10801 Component 4801 10801 or DT V 4801 10801 signals are input Wide Fit and Just Scan are only operated in HDMI mode MENU s a 7 H a 4 MENU EXIT Adjusting the Monitor Digital NR Digital Noise Reduction If the broadcast signal received by your TV is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen Off Turns the screen noise reduction function off Low Reduces screen noise at a low level Medium Reduces screen noise at a medium level High Reduces screen noise at a high level Auto Automatically recognizes and reduces screen noise MENU gt J gt a gt H a gt H gt MENU EXIT HDMI Black Level When a DVD or set top box is connected to your TV via HDMI it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI Black Level This function is active only when the an external device DVD player STB etc is connected to the TV via HDMI RGB Signal Available in HDMI Mode Only Normal Low
36. e Otherwise this may result in fire L Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire 3 Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating L Do not disconnect the power cord while using the product e Otherwise this may result in damage to the product due to electric shock L To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily op erable e This may cause electric shock or fire J Use only the power cord provided by our company Do not use the provided power cord of another product e Otherwise this may result in fire or electric shock Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high humidity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monitor L Do not drop the monitor when moving it e This may cause damage to the product or the person carrying it a a 3 Ensure that at least two persons lift and move the product e Otherwise it may be dropped and cause personal injury and or dam age the product L When installing the product in a cabinet or rack make sure that the front end o
37. e composite signal and transmitting it to the monitor The monitor displays the color signals by separating the compo Dot Pitch Vertical Frequency Horizontal Frequency Interlace and Non Interlace Methods Plug amp Play Resolution site signal into original color signals The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance be tween two dots of the same color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle The in verse number of the Horizontal Cycle is called Horizontal Fre quency Unit kHz Showing the horizontal lines of the screen from the top to the bot tom sequentially 1s called the Non Interlace method while show ing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the moni
38. ed to the channels directly You can however change these names or assign new names as required Available in Analog TV Mode Only MENU sa gt Fa Fo 6 a FH a nd ws 2 54 ws F SMENU EXIT Adjusting the Monitor Fine Tune Due to weak signals or an incorrect antenna configuration some of the channels may not be tuned correctly Available in Analog TV Mode Only MENU sa gt gt a T gt H Sa e H gt T 6 MENU EXIT Signal Strength Unlike analog channels which can vary in reception quality from snowy to clear digital HDTV channels have either perfect reception quality or you will not receive them at all So unlike analog channels you cannot fine tune a digital channel You can however adjust your antenna to improve the reception of available digital channels If the signal strength meter indicates that the signal is weak physically adjust your antenna to increase the signal strength Continue to adjust the antenna until you find the best position with the strongest signal Available in Digital Cable TV Mode Only MENU sa gt 6 gt a KS ES MENU EXIT Adjusting the Monitor Setup Available Modes lpc DvI fultv 4 Component HDMI Note The default setting may be different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Plug amp Play You can manage the entire conf
39. ertically MENU gt gt a gt 4 Sa T H Sa 4 MENU EXIT Adjusting the Monitor Image Reset Image parameters are replaced with the factory default values MENU gt a 7 H a T H MENU EXIT Resolution Coarse Fine Position Image Reset Resolution T920 Xx 1200 m60Hz Enter a Return P p ma r Displays the resolution set on the PC Picture Options Color Tone Adjusting the Monitor The tone of the color can be changed Available in PC DVI mode only Cool Normal Warm Custom MENU gt gt a gt HS a 5 H MENU EXIT R Gain G Gain B Gain Adjusts the individual R G B color controls MENU gt a gt H Sa T H 6 a 4 MENU EXIT Size You can switch the Size Wide 4 3 MENU a 7 H a 4 MENU EXIT Adjusting the Monitor Reset Picture parameters are replaced with the factory default values e OK e Cancel MENU gt Fa gt H gt a Ts H MENU EXIT Picture TV Component HDMI Mode The Monitor has three automatic picture settings Dynamic Standard and Movie that are preset at the factory You can activate either Dynamic Standard or Movie e Dynamic Selects the picture for high definition in a bright room e Standard Selects the picture for optimum display in a normal environmen
40. evices such as digital DVD are connected to the HDMI IN 1 terminal of the monitor using the HDMI cable When all the connections are completed connect the power cords for the monitor and DVD or the device connected to the digital output terminal Select HDMI using the SOURCE _ button 2 Connections Connecting Using a DVI to HDMI Cable O Connect the DVI output terminal of a digital output device to the HDMI IN 1 terminal of the monitor using a DVI to HDMI cable B Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output device and connect the opposite jack to the HDMI PC DVI AUDIO IN terminal of the monitor 3 When all the connections are completed connect the power cords for the monitor and DVD or the device connected to the digital output terminal 4 Select HDMI using the SOURCE P button Note If you just connect using the DVI to HDMI cable without connecting to the sound source you cannot hear sound Connecting the audio output terminal of a digital device to the R AUDIO L of COMPONENT IN of the monitor using an audio cable will not give you sound Make sure to connect to the HDMI PC DVI D AUDIO IN terminal of the monitor Connecting and Using an Amplifier Note You can connect the digital sound input optical or standard sound input terminal of your amplifier to your monitor using the correct cable l
41. ey Ka maang he er iem ee Se ee ee G aT Lie B a Nang kajel mee a ge i es crbHd bua om mm ee eee bg Pee oe 4 Soro Dang Bra Kora ba makeh your eer L laiph Menitzes on PHEA Gefore DOG LE fieira Corp tor Coige 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue Using the Software Sorter refresh rate a amn san df Biche madla hal Pri eo OL aan Dinamo Pen check ba dioei yess So piel diplay maga Fat Hin manna Gant Saging comert y Thee mag beaj ba an uel apila pardon dampyak hargas p Continue Cancel User Account Control helps stop unauthorized changes to your computer Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab Dena PT Ti Pra Trang AnG panay i Ta waa Seima cui Shay ceiver ba To upis a Greer pie br i daa e drvca Kai ahe opii a ar ral ach Sah previa raae e hasina pa minini dica Ta umiral Fa dia Aro Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer je Hoey Oo y
42. f the bottom of the product does not project out e Otherwise it may fall or cause personal injury e Use a cabinet or rack of a size appropriate to the product Safety Instructions L DO NOT PLACE CANDLES MOSQUITO REPELLANT CIGA RETTES AND ANY HEATING APPLIANCES NEAR THE PROD UCT e Otherwise this may result in fire J Keep heating appliances as far away from the power cord or the prod uct as possible e Otherwise this may result in electric shock or fire L Do not install it in a badly ventilated location such as a bookcase or closet e Otherwise this may result in fire due to an increase in the internal temperature CJ Put down the monitor carefully e Failing to do so may damage the monitor L Do not place the front of the product on the floor e Otherwise this may result in damage to the screen display J Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount J Install your product in a well ventilated location Ensure that there is a clearance of more than 10 cm from the wall e Otherwise it may result in fire due to an increase in the internal tem perature L Bend the outdoor antenna cable downwards at the location where it goes in so that rainwater does not flow in e Ifrainwater enters the product it may result in electric shock or fire in electric shock or fire J E
43. gt 4 a MENU EXIT Auto Program The TV automatically cycles through all of the available channels and stores them in memory In rare cases Auto program may miss a few channels due to weak signals and the channels may not be added to the channel memory e Air e Cable e Auto MENU sa Ko lt a gt H Ga To IH aie aye iH SH S MENU EXIT Clear Scrambled Channel Adjusting the Monitor The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Pro gram is completed It removes the scrambled channels from the list by tuning the digital cable channels This process may take up to 20 30 minutes Available in Digital Cable TV Mode Only MENU gt gt H a MENU EXIT Channel List You can manage the channels All MENU sa Kz Ha lA a To lA a To HY OH Ol 1 MENU EXIT Added Note e All selected channels will be shown on Added menu MENU a gt Fa Ko Ha Fo lH al eo Ha io le Oi lH MENU EXIT Adjusting the Monitor Favorite Note e Only memorized channels can be set as favorite channels e All favorite channels will be shown in the Favorite menu MENU gt 7 gt H oa Fo ao le lH ao lH SIH SA F gt lH MENU EXIT Name If channel name information is broadcast when you store the channels either manually or automatically the names are assign
44. ick the Display icon Select the Settings tab and click Advanced Properties button Choose Monitor Casel Ifthe Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that I can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click the Open button then click OK button Choose your monitor model and click the Next button then click Next button Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System l pA 3 Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button 10 11 Using the Software Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A
45. iguration MENU sa gt a SH sa po a sf aria lH Oa gt H gt 7 H Sa Ts H SMENU EXIT Language You can choose one of 3 languages Adjusting the Monitor English Espanol Francais The language chosen affects only the language of the OSD MENU a gt a MENU EXIT Time Clock You can set the current time Clock Mode Auto Manual MENU sa gt H a 1H SH Ga MENU EXIT Clock Set Note Clock Set are available only when Clock Mode set to Manual MENU sa gt lt gt a 122 SH Ga lH 5 a 4 2 MENU EXIT Adjusting the Monitor Time Zone si Note Time Zone are available only when Clock Mode set to Auto MENU sa gt gt a T gt H SH sa 1st Ga F lA MENU EXIT DST Note e DST are available only when Clock Mode set to Auto e Depending on the broadcast station and signal the auto time may not be set correctly If this occurs set the time manually e The Antenna or cable must be connected in order to set the time automatically MENU sa gt ta FH SH sa T lH GS a F lA 5 MENU EXIT Adjusting the Monitor Sleep Timer Use to set the Monitor to be turned off automatically in certain minutes e Off 30 60 90 120 150 180 MENU sa gt Ft gt a T gt lH a T gt lH a T aye 2 MENU E
46. installed the adapter video driver and the monitor driver 4 Check if the scanning ratio of the video screen is set at 56 Hz 75 Hz Do not exceed 60 Hz when using the maximum resolution 5 If you have problems in installing the adapter video driver boot the computer in Safe Mode remove the Display Adapter at the Control Panel System Device Administrator and then reboot the computer to reinstall the adapter video driver Check List E note Before calling for assistance check the information in this section to see if you can remedy any prob lems yourself If you do need assistance please call the phone number on the Information section or contact your dealer 1 Problems related to Installation Note Problems related to the monitor installation and their solutions are listed Troubleshooting PC Mode It appears the PC does not function normally Check if the Display Adapter Driver VGA Driver is properly installed Refer to Installing Driver The monitor screen flickers Check if the signal cable between the computer and the monitor is securely connected and tight ened Refer to Connecting the monitor TV Mode TV screen is blurred or shows noise signals Check if the TV antenna connector is securely connected to the external antenna Refer to Connecting TV TV signal is not received Select Auto Program to configure the channel system automatically Refer to the Auto Pro gram 2 Problems
47. k Options Preferred Language You can select the audio language Available in DTV Mode Only MENU sa T gt ta T gt H 6 H G a Y 4 MENU EXIT Adjusting the Monitor Multi Track Sound e Mono Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal e Stereo Choose for channels that are broadcasting in stereo e SAP Choose to listen to the Separate Audio Program which is usually a foreign language trans lation Available in Analog TV Mode Only MENU sa gt ta T SH SH G a T 5 MENU EXIT Auto Volume Al Reduces the differences in volume level among broadcasters e Off e On MENU a Ko fl KS Sa T H MENU EXIT Adjusting the Monitor TV Speaker If you set this menu On sound output from the speakers is muted in case of using the home theater e Off e On MENU sa gt Sa Ko a MENU EXIT Channel Available Modes LJpc pDvI itv amp Component HDMI Note The default setting may be different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Antenna Adjusting the Monitor You can select a normal or wired channel If ANT IN are connected select the antenna input you want If the antenna input is not selected properly noise may appear on the screen e Air e Cable MENU sa
48. lt in fire due to electric shock or leakage L Do not place any heavy items or toys or confectionery such as cookies etc that may attract the attention of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death Safety Instructions L Be careful that children do not place the battery in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e If children have had the battery in their mouths consult your doctor immediately LI When replacing the battery insert it with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid J Use only specified standard batteries Do not use new and used bat teries together e This may cause a battery to break or leak and may cause fire injury or contamination damage L The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery 3 Do not turn the product upside down or move it while holding only the stand e Otherwise
49. nsure that the packaging vinyl is kept away from children e Otherwise it may result in serious harm suffocation if children play with it L If the height of your monitor is adjustable do not place any object or part of your body on the stand when lowering it 4 e This may cause damage to the product or the person carrying it Clean Others Safety Instructions When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric 3 Do not spray cleaner directly onto the surface of the product e Otherwise this may result in the discoloration and distortion of the structure and the screen surface may peel off J Clean the product using a soft cloth with a monitor cleaner only If you must use a cleaner other than the monitor cleaner dilute it with water at a ratio of 1 10 LI When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth e Otherwise it may result in fire L When cleaning the product make sure to disconnect the power cord e Otherwise it may result in electric shock or fire L When cleaning the product disconnect the power cord and clean it softly with a dry cloth e Do not use chemicals such as wax benzene alcohol thinner mos quito repellant lubricant or cleaner These may change the appear ance of the product surface and peel off the indication labels on the product J Since the product housing is ea
50. ogram manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Start button of Windows and then select Run Enter D color NCProSetup exe and then press the Enter key If the drive where the CD is inserted is not D enter the applicable drive How to delete the Natural Color software program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button Adjusting the Monitor Picture Available Modes Jpc DvI rv 6 Component HDMI Note The default setting may be different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Picture PC DVI Lil MagicBright MagicBright is a feature providing optimum viewing environment depending on the contents of the image you are watching Currently five different modes are available Entertain Internet Text Dynamic Contrast and Custom Each mode has its own pre configured brightness value e Entertain High Brightness For watching motion pictures such as a DVD or VCD e Internet For working with a mixture of images such as texts and graphics e Text For documents or works involving heavy text e Dynamic Contrast Adjusting the Monitor Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast
51. onitor The direct button on the remote control is SOURCE button PC DVI TV Component HDMI1 HDMI2 MENU sa ol H Ga 7 H Edit Name Name the input device connected to the input jacks to make your input source selection easier PC DVI Component HDMI HDMI2 MENU sa gt gt a T Sa 7 2 MENU EXIT Troubleshooting Self Test Feature Check E note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly Self Test Feature Check 1 Turn off both your computer and the monitor 2 Unplug the video cable from the back of the computer 3 Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal cable This box appears during normal operation if the video cable becomes disconnected or damaged 4 Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly Not Optimum Mode If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Mode Not Supported
52. osition e Keep your back straight while looking at the product e The distance between your eyes and the screen should be between 45 to 50 cm Look at the screen from a slightly higher location than the height of the screen e When using the product use it in the correct position e Adjust the angle so that light is not reflected on the screen e Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand e Keep your elbow at 90 degrees e Keep your knees at greater than 90 degrees and keep your heels firmly on the floor Keep your arms lower than your heart Introduction Package Contents i Note Please make sure the following items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items Unpacking Without stand With stand Monitor Monitor Manuals Quick Setup Guide Warranty Card User s Guide Not available in all loca tions Cables D Sub Cable Power Cord g AV DVI Cable HDMI Cable Headphones Sold separately Introduction Sold separately 5 aa Stereo Cable TV Antenna Cable Component Pp Pg Y Cable Coax1al Cable EE Audio cable Digital audio optic output ca USB Cable ble Others Remote Control Batteries AAA X 2 Cleaning Cloth BN59 00678A Not available in all loca tions TT gt Cable holding ring Stand Body Stand Base Note Cleaning Cloth is only p
53. ou ward Mi Hah koa draer pofbeneT ry Bor Gap pane Gn rea GT dart Qo deere apan n Fax aan Dearth gutomatcally lee updabrd dover potters Kirakan andl pepe gaan eel A deve fe fer Lele fro nara Fes pra dryers F petal riin Li eed od ea e aaa La ere peek bom a fit of Geeks drani on My computer The fied rd Chee orale disse Pee ogee ee or beer arad nl ir aga an er igar egy me draa Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK 9 Microsoft Windows XP Operating System Using the Software Spiir the green drier yeu ward tari all for tha hanhan aa Pa arch ree i lah a Pale Pee ere eed Pe chee Poel ps Bara i ie Pe deters Pai ree mie ed al th Peres Cie trm aateiwten Haza NG aan Pl ria I Ta ose a h agree Select the deviar driver you want to inptall few this hardware am pa rage a aha p par Pari aai Pare in Pama pna Gama Pa sid Pha ee ik a La Harri ban ORY Karaang mus NN Samang paa Aiba haa subo Ad upland your diet sofware S a mere biomi paing Screen refresh rate Sa Hertz Gf pode modes that the monitor cannot display Clarin than cheeck ben apa you ko peci daplay modes that thig monaor Cannot display correctly This may lead to an unusable Select the model that matches your monitor from the list of monitor models on the screen and click Next Top saran ln pl Pei eve Bae Ti pink Pk eae aa Na P
54. own Up Left Right buttons I INFO 9 COLOR BUTTONS 10 CC Introduction Number Buttons button VOL TOOLS V 4b Down Up Left Right buttons 1 INFO COLOR BUTTONS CC MTS MENU SOURCE PRE CH CHA ok MUTE O RETURN ENTER E exit srs FAV CH P SIZE 6 60060600 6606 O S00 M09600 Turns the product On Off Selects the TV mode directly Press to change the channel The button operates only for DTV It is used to select MMS multi channel for a DTV Adjusts the audio volume Use to quickly select frequently used functions Moves from one menu item to another horizontally vertically or adjusts selected menu values Current picture information is displayed on the upper left corner of the screen Press to add or delete channels and to store channels to the favorite channel list in the Channel List menu Controls the caption decoder 11 MTS 12 LL MENU 13 SOURCE 14 PRE CH 15 CHA 16 MUTE 17 3 RETURN 18 ENTER 19 EXIT 20 L srs 21 FAV CH 22 P SIZE Introduction You can select the MTS Multichannel Television Stereo mode Mono Stereo SAP Separate Audio Program Set MTS to ON to choose Mono Stereo or SAP Opens the on screen menu and exits from the menu or closes the adjustment menu Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devi
55. ows 3 Choose your monitor model in the model list then click the OK button z SAMSUNG monitor installer Select the display sdapter on which you wand lo intel te monte EDH 9520 Aug and Pim Mori Sale the mordar ahich you Nani bo inatali 4 Ifyou can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation The software pou ane installing for this handerare Samsung saa has not passed Windows Logo testing to wenly ite compahbdiy with Windows XP Tell ma why thes besting is impotan Continuing your installation of this software may impair or destabilize the comeci operation of your system either immediately of in the future Microsoll strongly recommends that pou stop this installation now and contact the hardware vendor for software that haz passed Windows Logo testing Colina Arpa Using the Software Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click GA Start and Control Panel Then double click on Appearance and Personalization 3 ee Se ee SS ee es m rr Den TERS aa LAR DISARI EE A A NG oe ee
56. p www samsung com http www samsung com se http www samsung com ch http www samsung com http www samsung ee http www samsung com lv http www samsung It http www samsung kz http www samsung ru http www samsung com http www samsung uz http www samsung com http www samsung com http www samsung com hk http www samsung com http www samsung com http www samsung com jp http www samsung com my http www samsung com nz 1800 10 SAMSUNG 726 7864 http www samsung com ph 1800 SAMSUNG 726 7864 1800 29 3232 02 689 3232 http www samsung com http www samsung com Terms Appendix Asia Pacific http www samsung com tw http www samsung com http www samsung com http www samsung com TAIWAN 0800 329 999 VIETNAM 1 800 588 889 Middle East amp Africa SOUTH AFRICA 0860 SAMSUNG 726 7864 TURKEY 444 77 11 U A E 800 SAMSUNG 726 7864 8000 4726 http www samsung com Sync Signal Sync Synchronized Signals refer to the standard signals that are required to display desired colors on the monitor They are divided into Vertical and Horizontal Sync Signals These signals display normal color images by the set resolution and frequency Types of Sync Signals Separate Composite This is a scheme of transmitting individual vertical and horizontal sync signals to the monitor This is a scheme of combining vertical and horizontal sync sig nals into on
57. reen is shown when This screen is shown when scenes are captured using dig scenes are converted to ana scenes created via analog sig ital broadcasting equipment log broadcasting signals be nals are displayed while fore being sent Humans and Information and they are sent in HDTV objects appear heavier thanin watching HDTV broadcast 16 9 mode reality ing ote If temporary stops mosaic screens or jagged screens occur this is not a TV problem Contact your cable broadcasting company for a check up For information on how to connect and use your video DVD DVD combo home theater PC etc refer to their respective user manuals PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another espe cially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty ka What is Image retention During normal operation of a LCD panel pixel image retention doesn t occur However 1f the same image is displayed for a long time a slight difference in electric charge accumu lates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas of the display Thus the previous image is retained
58. roadcasting service in both Korean and foreign original language as well as in stereo mode A2 BTSC EIAJ DVI HDMI High Definition Multi media Interface Correct Disposal Appendix This system uses two carriers to transmit voice data Countries such as South Korea and Germany use this system Broadcast Television System CommitteeThe stereo broadcasting system that is used in most of the countries that have adopted the NTSC system including the United States Canada Chile Vene zuela and Taiwan It also refers to the organization that has been organized to promote its development and management Electronic Industries Association of Japan DVI is the acronym for Digital Video Interface It is a new type of video interface technology that provides the maximum screen quality for high quality display devices and high end graphics cards including flat panel LCD monitors digital audio signals with a cable without any compression e HD High Definition In HD 1080 line 2x density beaming 10801 is used HD provides a five times clearer screen quality than the existing analog method and has a wide 16 9 aspect ratio e SD Standard Definition In HD 480 line double beaming 4801 is used SD provides a screen quality somewhere between HD and the existing an alog method It exhibits a two times better screen quality than analog TV Correct Disposal of This Product Waste Electrical amp Electronic Eq
59. rovided for highly polished black products as a product feature Introduction Your Monitor Front S0 UAC E we MEHU SOURCE Activates a highlighted menu item SOURCE Push the button to change the input signal source Changing the source 1s only allowed for external devices connected to the product at the time To switch Screen modes PC DVI TV Component HDMI1 HDMI2 gt gt Click here to see an animation clip O MENU Use this button to open the on screen menu and to exit from the on screen menu or to close the screen adjustment menu GED OL Moves from one menu item to another horizontally or adjusts selected menu val ues Adjusts the audio volume 56 CH Moves from one menu item to another vertically or adjusts selected menu values In TV DTV mode selects TV DTV channels amp Power button J Use this button for turning the product on and off Introduction Note The button to the right of the monitor are touch sensitive buttons Touch a button lightly with your finger Power indicator This light is lit when operating normally and blinks once when your adjustments are saved Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods Speaker Rear Note The configuration
60. s of digital broadcasting Digital TV broadcasting generates less noise and provides clearer visuals and sound than analog TV broadcasting does As services develop you can also enjoy various information services because various kinds of data besides video and audio can be sent For example while watching a sports game you can view various data on your favorite player or you can view all or selected screens which have been captured from different angles for a Troubleshooting specific scene In addition you can retrive information on a previous story or drama or you can buy home shopping products such as an accessory currently on TV Digital TV broadcasting allows you to easily access various information services in your home creating a more information oriented home What is the difference between HDTV and SDTV There are various types of digital TVs The most widely known types of digital TV are HDTV and SDTV They are classified according to the screen quality and the video specifications e HDTV High Definition TV High screen quality very clear TV e SDTV Standard Definition TV Common standard digital TV An SDTV has an aspect ratio of 4 3 which is the same as that of an analog TV SDTV has an aspect ratio of 16 9 which is similar to a cinema screen This provides a much better screen quality than SDTV It s like having a theater in your home Digital TV broadcasting in our country 1s ultimately orientated towards HDTV Can
61. s the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Win dows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are reg istered trademarks of the U S Environmental Protection Agency EPA As an ENERGY STAR Partner Samsung Electronics Co Ltd has determined that this product meets the ENERGY STAR guidelines for energy efficiency All other product names mentioned herein may be the trade marks or registered trademarks of their respective owners Fue TYAS manufatured under license from Dolby Laboratories Dolby and D0 wove sunRounp the double D symbol are trademarks of Dolby Laboratories
62. sa gt Ft a T H Set Ga Ko a F ae MENU EXIT Canadian English MENU sa gt H Sa T H Set Ko a F aye MENU EXIT Canadian French MENU sa gt H a T H Set og Ko Gat ae 2 MENU EXIT Adjusting the Monitor Downloadable U S Rating MENU sa gt Fa T H Set Ko o a F ae 2 MENU EXIT Change PIN MENU sa gt H gt a OS gg F o CE 1 tatatak LS MENU EXIT Caption Fnables or disables the Caption feature and sets the appearance of closed caption text Caption Adjusting the Monitor Off On MENU sa gt ta gt 2 SH a MENU EXIT Caption Mode e The Defaultis CC1 e CC1 The Primary Synchronous Caption Service These are captions in the primary language that must be in sync with the sound preferably matched to a specific frame e CC2 The Special Non Synchronous Use Captions This channel carries data that is intended to augment information carried in the program e CC3 Secondary Synchronous Caption Service Alternate program related caption data typically second language captions e CC4 Special Non Synchronous Use Captions Similar to CC2 e Texti First Text Service This may be various non program related data e Text2 Second Text Service Additional data usually not program related e Text3 Text4 Third and Fourth Text Services These data channels should be used only if Textl and
63. sily scratched make sure to use the specified cloth only e Use the specified cloth adding only a little water As the product may be scratched if there is any foreign material on the cloth make sure to shake it thoroughly before using it L When cleaning the product do not spray water directly onto the main body of the product e Ensure that water does not enter the product and that it is not wet e Otherwise this may result in electric shock fire or a malfunction LJ The product is a high voltage product Ensure that users do not disas semble repair or modify the product themselves e Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center 7 55 y s KUA YE Safety Instructions J If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and contact a Service Center e Otherwise this may result in electric shock or fire LJ Do not place this product in a location exposed to moisture dust smoke water or in a car e Otherwise this may result in electric shock or fire L When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center e Otherwise this may result in electric shock or fire L If thunder or lightening is occurring do not touch the power cord or antenna cable e Otherwise this may result in
64. sly both the D sub and DVI cables to one computer Connections e If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen check to see if the monitor status is set to analogue Press SOURCE pea button to have the monitor double check the input signal source Connecting to a Macintosh 1 Using the D sub Analog connector on the video card e Connect the signal cable to the D SUB port on the back of your monitor Note Turn on the monitor and Macintosh Connecting to Other devices Note e This monitor allows the user to connect it to such input devices as a DVD player a VCR or cam corder or a DTV or TV without disconnecting the PC e The configuration at the back of the monitor may vary from product to product e The DVI to HDMI cable digital audio optic output cable and RCA to stereo for PC cable are all sold separately Contact a Service Center to purchase any products sold separately Connecting TV Note You may view television programs on the monitor if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer Connections 1 Connect the CATV cable or TV antenna cable to the ANT IN port on the rear side of the monitor Make sure to use a TV antenna cable sold separately as the antenna cable e When using an interior antenna terminal Check the antenna terminal on the wall first and connect the
65. special fluorescent or neon lamp is on in the vicinity 5 You may see small particles if you look closely at the edge of the bezel sur rounding the screen Q amp A This is part of the product s design and is not a defect How can I change the frequency The frequency can be changed by reconfiguring the video card Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can I adjusts the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can I set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function in the BIOS SETUP of the computer Refer to the Windows Computer Man ual How can I clean the outer case LCD Panel Disconnect the power cord and then clean the monitor with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the monitor What are the benefit
66. t The Power Indicator blinks The monitor is currently saving the changes made in settings to the OSD memory The screen is blank and the power indicator light blinks every 0 5 or 1 seconds The monitor is using its power management system press a key on the keyboard The screen 1s blank and is blinking If you see the TEST GOOD message on the screen when you press the MENU button check the cable connection between the monitor and the computer to ensure that the connector is properly connected 3 Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q gt PF Q No sound Ensure that the audio cable is firmly connected to both the audio in port on your monitor and the audio out port on your sound card Refer to the Connecting the monitor Check the volume level Refer to the Volume The sound level is too low Check the volume level Refer to the Volume If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program 4 Problems related to Remote Control Note Problems related to the remote control and their solutions are listed Q A A A The remote control buttons do not respond Check the battery polarities Check if the batteries have been exhausted Check if the power is on Troubleshooting Check if the power cord is securely connected Check if a
67. t e Movie Selects the picture for viewing movies in a dark room Adjusting the Monitor MENU gt 4 3 l a MENU EXIT Backlight Contrast Brightness Sharpness Color Tint You can use the on screen menus to change the contrast and brightness according to personal prefer ence e Backlight Adjust the screen brightness by adjusting the LCD backlight e Contrast Adjust the Contrast e Brightness Adjust the Brightness e Sharpness Adjust the Sharpness e Color Adjusts the picture color e Tint Adds a natural tone to the display MENU Ja gt 2 gt F 4 H MENU EXIT Picture Options Color Tone The tone of the color can be changed Cooll Cool2 Normal Warmi Warm2 Adjusting the Monitor Size Note Warm or Warm is only activated when the picture mode is Movie Settings can be adjusted and stored for each external device you have connected to an input of the TV MENU gt 3 gt a SH St Sa Ts MENU EXIT You can switch the Size The direct button on the remote control is P SIZE button Wide A full screen is displayed regardless of the screen aspect ratio of the input signals 16 9 Sets the picture to 16 9 wide mode Zoom1 Magnifies the size of the picture on the screen Zoom 2 Magnifies the size of the picture more than Zoom1 Wide Fit Enlarges the aspect ratio of the pi
68. ting Temperature 50 F 104 F 10 C 40 C Specifications Environmental considerations Humidity 10 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings In most cases the monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with preci sion of Ippm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 6 912 000 Note Design and specifications are subject to change without prior notice Ky Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used 1n all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This monitor has a built in power management
69. tor to exchange informa tion automatically This monitor follows the international standard VESA DDC for the Plug amp Play function The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the ac RF Cable Satellite Broadcasting Cable TV CATV VHF UHF Channel Fine Tuning External Device Input DVD DTV Broadcasting Digital TV Broadcasting LNA Low Noise Amplifier Antenna Converter English Caption Caption Set ting Multiplex Broadcasting Appendix curacy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1920 x 1200 this means the screen is composed of 1920 horizontal dots horizontal resolution and 1200 vertical lines vertical resolution A round signal cable generally used for TV antennas Balances the levels of the sound coming from each speaker in televisions with two speakers Whereas the terrestrial broadcasting is delivered via frequency signals through the air cable broadcasting is transmitted via a ca ble network In order to view cable TV one must purchase a cable receiver and hook it up to the cable network CATV refers to the broadcasting service offered at hotels schools and other buildings through their own broadcasting sys tem apart from VHF or UHF broadcasting by terrestrial broad casters The CAT
70. uipment Europe only Authority Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indi cates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrol led waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustaina ble reuse of material resources Household users should contact either the retailer where they purchased this product or their local government of fice for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This prod uct should not be mixed with other commercial wastes for disposal Information in this document is subject to change without notice This is an interface that connects both quality video signals and Appendix 2008 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or con sequential damages in connection with the furnishing performance or use of this material Samsung i
71. ured by using advanced semiconductor technology with preci sion of Ippm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 6 912 000 Note Design and specifications are subject to change without prior notice Y7 Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor to low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility installed on your computer to set up this feature State Normal Operation Power saving mode Power off Power button EPA ENERGY 2000 Power Indi
72. urns the LED on in standby mode e When Watching TV Turns the LED on while watching TV e Always LED is always on MENU sa gt lt a Ko a MENU EXIT Adjusting the Monitor Light Level rag PA A TEE 1 pon ANA Pj Pi lala tae b IN me prang pb UG Use to adjust the light level 1 e the brightness of the light MENU sa T gt H gt a F gt 4 4 H MENU EXIT Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption When watching TV at night set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption e Off Turns off the energy saving function e Low Sets the TV to low energy saving mode e Medium Sets the TV to medium energy saving mode e High Sets the TV to high energy saving mode MENU sa gt T a MENU EXIT Adjusting the Monitor SW Upgrade Use to upgrade the software e USB MENU sa gt lH gt a gt tS tS l MENU EXIT Input Available Modes Jpc DvI filtv amp Component HDMI Note The default setting may be different depending on the selected Input Mode input signal source selected in External Input List and the selected resolution Source List An Use to select PC TV or other external input source connected to the Monitor Use to select the screen of your choice Adjusting the M

Samsung T260HD

Contents

Download Pdf Manuals

Related Search

Related Contents