Targus Mobile Docking Station
Contents
1. PA090 Serial Port COM ee Universal Serial Bus controllers Generic USB Hub Generic USB Hub Intel r 82371 4B EB PCI to USB Universal Host Controller USB Composite Device USB Printing Support USB Root Hub Y E Data USB Floppy Sample Device Manager tab Windows XP operating system From the Device Manager window expand the following Human Interface Devices displays PS 2 Keyboard and Mouse Adapter when a PS 2 device is plugged in Network adapters displays USB Ethernet 10 100 Model PA095 only Ports COM amp LPT displays the Serial on USB COM 2 port Universal Serial Bus controllers displays the other devices installed for the port replicator USB hub composite device and printing support Verifying a Serial Modem Connection When attaching a modem to the serial RS232 port verify that the port assigned to your modem is Serial USB COMx where x is the number of the COM port 12 If the operating system does not detect automatically that your modem is assigned to Serial USB COMy rerun the Hardware Wizard and choose Select from a list instead of Autodetect Then select Serial USB COMx as the COM port Error Message on Your Handheld Computer If the error message Connection Not Established appears on your handheld computer check that the COM port setting in either your HotSync or ActiveSync software matches the setting on the port replicator see Verifying Devices2. plug it into the port replicator parallel port Select Start Settings and then Printers Right click the printer device you are reassigning and select Properties In the Printer Properties window select Details or Connection for the Printer Section titles vary so check your printer s user manual for specific instructions Change the setting to PB1284 1 USB port to redirect printing to the port replicator Model PA095 only Ethernet Port To connect an RJ 45 Ethernet cable attach the cable connector to the Ethernet port on the port replicator Additional procedures to connect to an actual network depend on the type of network you are using Contact your network administrator for detailed instructions USB Port To connect a USB device plug it into a USB port on the port replicator and follow the additional instructions provided with the device Special Notes Using a Device with the Port Replicator When you connect a device to the USB Mobile Port Replicator you should be able to use it as you normally would NOTE DEVICES THAT SUPPORT CUSTOM PROGRAMMABILITY U OR SPECIAL FEATURES MAY NOT FUNCTION PROPERLY FOR MORE INFORMATION ON USING A DEVICE REFER TO THE INSTRUCTIONS PROVIDED WITH THE DEVICE Global Suspend Mode When your computer is in suspend mode the port replicator also enters suspend mode to avoid power consumption When your computer wakes up the port replicator wakes up automatically Produc
3. Parallel Interface Controller PS 2 Adapter twice This configuration process takes a few minutes The operating system does not prompt when configuration Is complete Watch that all hardware devices are configured before opening another application or connecting devices to the port replicator NOTE SOME HARDWARE DEVICES MAY PROMPT YOU FOR THE LOCATION OF DEVICE DRIVERS To install the drivers Select Install the software automatically Recommended and click Next The Found New Hardware Wizard program begins installing the hardware drivers The Completing the Found New Hardware Wizard screen appears 2 Click Finish and repeat as needed for each device 3 Restart your computer When your computer restarts the port replicator dock should be completely configured LED Status Indicator Lights Once all device drivers are installed the LED status indicator lights glow and you can connect devices to the port replicator The LED lights display as follows Hub Link light blinks green Serial light glows green Each PS 2 light flashes green when a device is first connected or there is activity on the port USB lights glow green when a USB device is attached Model PA095 only Tx Rx light flashes green when data is transmitted to or from the network 100M light glows green when connected to a 100 Mbps network NOTES THE ETHERNET PORT IS COMPATIBLE WITH 100 MBPS O NETWORKS HOWEVER THE ACT
4. Targus Port e lt 3 oO If Rot hxods TARGUS USER S GUIDE Making Your Mobile Life Easier Visit our Web site at www targus com i Making Your Mobile Life Easier Features and specifications are subject to change without notice 004 Targus Group International and Targus Inc 400 0166 001A Lonbpon PaR s NewYork LosAnceLes Toronto Honc Kone SYDNEY BrRusseLs HannoveR BAaRceLona Tokyo MiLaNno AMSTERDAM SINGAPORE PMS Black PMS Black 100 15 Introduction Congratulations on your purchase of the Targus USB Mobile Port Replicator This ultra portable expansion module directly connects to a desktop or notebook computer via a Universal Serial Bus USB port The port replicator provides the following ports PS 2 two RS232 serial Parallel printer High speed USB 2 0 two RJ 45 Ethernet 10 100 Base T Model PA095 only Contents In addition to this user s guide the package contains Targus USB Mobile Port Replicator 2 foot 60 cm USB cable A B type Model PA075 only Driver software CD AC power adapter NOTE THE SUPPLIED AC POWER ADAPTER IS A UNIVERSAL ADAPTER THAT YOU CAN USE IN A 100 TO 240 AC VOLT OUTLET System Requirements USB 2 0 compliant port When connected to a USB v1 1 upstream port the Mobile Port Station s performance will be less than optimal For best results connect it to a USB 2 0 port Windows 2000 XP operating syste
5. UAL THROUGHPUT IS 10 MBPS MAXIMUM WHEN CONNECTED TO A USB v1 1 PORT DUE TO THE BANDWIDTH LIMITATION THE THROUGHPUT MAY DECREASE AS ADDITIONAL DEVICES ARE ATTACHED TO THE PORT REPLICATOR REGARDLESS OF WHETHER THE PORT REPLICATOR IS ATTACHED TO A USB 1 1 OR 2 0 PORT THE PORT REPLICATOR SUPPORTS HOT SWAPPING OF THE NETWORK CABLE Connecting Devices to the Port Replicator When connecting new devices to the port replicator you may need to install additional software drivers Consider the following guidelines The device drivers install automatically When connecting a new device to the port replicator you must run the Setup or Install program for that device When connecting a device to the port replicator do not force the cable connector into the port on the port replicator to avoid possible damage If the cable connector does not attach smoothly turn the connector over and try attaching it again AC PS 2 PS 2 RS232 Parallel RJ 45 power keyboard mouse Serial ethernet Model PAO95 PS 2 PS 2 Parallel RS232 Serial Keyboard Mouse Model PAO75 6 PS 2 Port To connect a PS 2 device such as a mouse or keyboard plug it into a PS 2 port on the port replicator and begin using the device Serial Port Connecting and Configuring a Modem To connect a serial modem Attach the cable connector to the serial port on the port replicator Install the modem software driver accor
6. are Installed on page 11 to verify the COM port setting on the port replicator You may also want to try reducing your baud rate setting in Hot Sync or Active Sync Some older versions of the Palm Desktop software are not compatible with the USB to Serial conversion Please contact your handheld computer vendor for software updates 13 Technical Support For technical questions please visit Internet www targus com support asp Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it To register your Targus accessory go to http www targus com registration asp You will need to provide your full name email address phone number and company information if applicable Warranty Targus warrants this product to be free from defects in materials and workmanship for one year If your Targus accessory is found to be defective within that time we will promptly repair or replace it This warranty does not cover accidental damage wear and tear or consequential or incidental loss Under no conditions is Targus liable for loss of or damage to a computer nor loss of or damage to programs records or data nor any consequential or incidental damages even if Targus has been informed of their possibility This warranty does not affect your statutory rights Warranty Registration at http www targus com registration asp Regulatory Compliance This device complies
7. ding to the instructions that come with the device When prompted to select the port choose the Serial USB COMx where x is the COM port number assigned by your operating system Connecting a Handheld Computer To connect a handheld computer Attach the cable connector to the serial port on the port replicator 2 Verify that the COM port setting in either your HotSync or ActiveSync software matches the setting on the port replicator To verify the COM port setting on the port replicator refer to Verifying Devices are Installed on page 11 To verify the COM port setting on your handheld computer refer to the documentation that came with it Parallel Port Connecting and Configuring a Printer for the First Time To connect a parallel printer Attach the cable connector to the parallel port on the port replicator Install the printer software driver according to the instructions that come with the device When prompted to select a port choose PB1284 1 USB port If this port does not appear in the list choose the LPT1 port complete the manufacturer s setup for your printer and follow the instructions below to redirect your printer Checking and Redirecting the Printer Port Settings Follow these instructions to check the printer port settings and redirect your printer from the LPT1 port to the PB1284 1 USB port on the port replicator Unplug the printer cable from your computer and
8. m CD ROM Drive SOFTWARE BEFORE CONNECTING IT TO YOUR COMPUTER OTHERWISE THE PORT REPLICATOR WILL NOT WORK PROPERLY Installing the Port Replicator Drivers 1 Turn on your computer WARNING YOU MUST INSTALL THE PORT REPLICATOR 2 Insert the driver software CD into your computer s CD ROM drive 3 If setup does not begin automatically click Start Run then enter D Setup exe where D is the path of your CD ROM drive and then click OK The Welcome screen appears 4 Click Next 5 If you are running the Windows XP operating system the Important Information screen appears Click Next The Setup program begins installing the software drivers NOTE IF YoU GET A WARNING SCREEN PLEASE CLICK CONTINUE ANYWAY The Setup Complete screen appears 6 Click Finish Connecting the Port Replicator to Your Computer After installing the port replicator drivers you are ready to connect the port replicator to your computer To do this 3 5 Turn off your computer Model PA095 only Open the USB cable compartment located on the bottom of the port replicator and uncoil the cable Connect the supplied AC power adapter to the AC power jack on the port replicator Plug the USB connector end of the USB cable into the USB port of your computer Turn on your computer The following will configure automatically Ethernet 10 100 Model PA095 only Serial Interface Controller USB Device twice
9. m Inc PS 2 is a registered trademark of International Business Machines Corporation Zip drive is a registered trademark of lomega Corporation Features and specifications are subject to change without notice All other trademarks and registered trademarks are the property of their respective owners c 2004 Targus Group International and Targus Inc Anaheim CA 92806 15
10. rd keyboard Troubleshooting Device Not Working Make sure that the device is fully inserted into the correct port on the port replicator Plug the device into a different port on the port replicator If it still doesn t work test the device by connecting it directly to your computer Verify that you ran the Setup or Install program for the device Make sure that the device appears in Device Manager For more information refer to Verifying Devices are Installed on page 11 Disconnect all devices from the port replicator and reconnect them one at a time Check that each device works before plugging in the next one Printer Not Found If your parallel printer is not working refer to Checking and Redirecting the Printer Port Settings on page 8 for instructions on how to verify and change the port settings Verifying Devices are Installed You can view the devices installed on the port replicator from the Device Manager window in System Properties Right click My Computer Properties then click the Hardware tab and then the Device Manager button 11 A Device Manager DER Fie Action view Help H eea SCS gy Human Interface Devices IDE ATA ATAPI controllers jal Infrared devices Keyboards 9 Mice and other pointing devices b Modems id Monitors BB Network adapters E PCMCIA adapters Ports COM amp LPT 2 Communications Port COM1 ay ECP Printer Port LPT1 3
11. t Limitations General The port replicator splits a single connection among a variety of devices and connections Some devices which use large amounts of bandwidth such as printers and digital cameras can consume all available resources and may interfere with the performance of other devices You may experience some temporary halting of some devices when a high data transfer is occurring For example your mouse may respond slowly while a graphic print job is printing or while you are experiencing heavy network traffic We recommend the following guidelines Do not transfer data to or from multiple high speed devices at the same time such as a digital camera and scanner If speed degradation does occur close other programs that use a USB device to improve device performance Parallel Port The parallel port is only compatible with printers and only supports enhanced bi directional printer features such as returning printer status For best results you should connect high bandwidth external devices which have a parallel connection such as a Zip drive directly to your computer PS 2 Mouse and Keyboard On the port replicator a PS 2 mouse emulates a USB mouse and a PS 2 keyboard emulates a USB keyboard This may result in a loss of enhanced features such as screen scrolling or programmable hot key features 10 However the mouse will continue to work as a standard two button mouse and the keyboard as a standa
12. with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation 14 FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Move the computer away from the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Windows and ActiveSync are registered trademarks of Microsoft Corporation Palm and HotSync are a registered trademarks of Pal
Download Pdf Manuals
Related Search