Home
        Philips FWD792 DVD Mini Hi-Fi System
         Contents
1.     Notes        Resume information will be erased if you have  changed the disc  opened the disc tray  changed  source or disconnected the system from the power  supply        This function is not available for MP3 DIVX   WMA disc        Selecting various mode functions    Repeat play mode    You can only select the Repeat play mode during  playback     For DVD   repeat chapterltitle  Press REPEAT repeatedly to select the  following    REPEAT CHAPTER   REPEAT TITLE   gt   REPEAT OFF    For SVCD VCDICD   repeat track disc  Press REPEAT repeatedly to select the  following    REPEAT TRACK   gt  REPEAT DISC   gt  REPEAT  ALL   REPEAT OFF    During program playback   Press REPEAT repeatedly to select the  following    REPEAT ONE PROGRAMMED TRACK    REPEAT ALL PROGRAMMED TRACKS   gt   REPEAT OFF    For MP3 repeat   track album disc   MENU ON    Press REPEAT repeatedly to select the  following    REPEAT TRACK   gt  REPEAT ALBUM   gt  REPEAT  DISC   gt  REPEAT ALL   gt  REPEAT OFF    23    Disc Operations    24    MENU OFF    Press REPEAT repeatedly to select the  following    REPEAT TRACK   gt  REPEAT DISC   gt  REPEAT  ALL   REPEAT OFF    Notes        When you open the disc tray  the Repeat  function will be cancelled automatically        For SVCD and VCD 2 0 discs  the Repeat  function is not available when the PBC function is  set to ON        If discs of different formats are loaded  the  Repeat function is only available for the current  disc     Shuffle play mode    In this m
2.    Replace the batteries with new ones    Check that the batteries are loaded correctly     Press DIM again     Set the clock correctly   f recording is in progress  stop it       Power has been interrupted or the power cord  has been disconnected  Reset the clock timer     47    Glossary    48    Analog  Sound that has not been turned into  numbers  Analog sound varies  while digital sound  has specific numerical values  These jacks send  audio through two channels  the left and right     Aspect ratio  The ratio of vertical and  horizontal sizes of a displayed image  The  horizontal vs  vertical ratio of conventional TVs  is  4 3  and that of wide screens is 16 9     AUDIO OUT Jacks  Jacks on the back of the  DVD System that send audio to another system   TV set  Stereo  etc       Bit Rate  The amount of data used to hold a  given length of music  measured in kilobits per  second  or kbps  Or  the speed at which you  record  Generally  the higher the bit rate better  the sound quality  However  higher bit rates use  more space on a Disc           Chapter  Sections of a picture or a music  piece on a DVD that are smaller than titles  A    Multichannel  DVD is specified to have all  sound tracks constitute one sound field   Multichannel refers to a structure of sound  tracks having three or more channels     Parental control  A function of the DVD to  limit playback of the disc by the age of the users  according to the limitation level in each country   The limitation varies f
3.   24 Bits   96 kHz  Frequency Response     4 Hz   20 kHz  44 1kHz   wu 4 Hz   22 kHz  48kHz     wn 4 Hz   44 kHz  96kHz                                Specifications       MAIN UNIT  Power Supply Rating       110   127   220   240V  n OEE Alita ata ads 50 60HZ Switchable  Power Consumption  ACH 85 W  St  Ndbya sa  lt 10W  Dimensions  w x h x d   265x 310 x 367  mm   WENE ianen    5 52 kg  Packaging Dimensions  w x h x d           515 x 610 x 520  mm         ee LORE  SPEAKERS  Front speakers  SYSTEM ann  3 way  Bass reflex       Impedanee au  ern 2Q  Speaker drivers       6 5    woofer         eek hend a 2 tweeter  Frequency response       50 Hz     20 kHz  Dimensions  w x hx d  iissa  re EEE 234 x 455 x 240  mm   Weishtausseue 6 52kg each       Specifications and external appearance are  subject to change without notice     45    Troubleshooting    46    WARNING    Under no circumstances should you try to repair the system yourself  as this will  invalidate the warranty  Do not open the system as there is a risk of electric shock     If a fault occurs  first check the points listed below before taking the system for repair  If  you are unable to remedy a problem by following these hints  consult your dealer or    Philips for help     Problem Solution    No power     NO DISC    is displayed     No picture     Distorted or poor picture     The aspect ratio ofthe screen cannot be  changed even though you have set the TV  shape     The DVD player does not start playback     The s
4.   33    DVD Menu Operations    Changing the password    Use the numeric keys  0 9  to enter your       You can change the four digit code used as  Password     o                                                              four digit code      gt  The password supplied by default is 1234      gt  If you forget the four digit code  press MI four  times  the system will change back to the default  password    Go to    Password    and enter your new code   Then  enter the same code again to confirm     PARENTAL       e  ENTER NEW CODE    MENU LANG  DEFAULTS    m 4 E    CONFIRM NEW PASSWORD    8 8        l  5        Press SYSTEM MENU again to remove the          n disc mode  press SYSTEM MENU      Select iy icon and press V        Press  lt  lt     gt  gt    A   Y onthe remote  control to navigate in the menu       gt  Move to      icon and press  gt  gt      gt  Move to    PASSWORD    and press  gt  gt      PARENTAL    MENU LANG  DEFAULTS    ENTER ORIGINAL       34    menu     Restricting playback by setting parental  level    Some DVDs may have a parental level assigned  to the complete disc or to certain scenes on the  disc  This feature lets you set a playback limitation  level  The rating levels are from 1 to 8 and are  country specific  You can prohibit the playing of  certain discs that are not suitable for your  children or have certain discs played with  alternative scenes     0 0            0 0 0                                                                   In disc 
5.  Mini  Hi Fi System     Step 2  Connecting speakers                                        Connect the speaker wires to the SPEAKERS   FRONT  terminals  right speaker to    R    and left  speaker to    L     coloured  marked  wire to          and black  unmarked  wire to             Fully insert  the stripped portion of the speaker wire into the  terminal as shown              Speakers eC          Front Left  L  Black   White                Front Right  R  Black Red          Notes        For optimal sound performance  use the  supplied speakers        Do not connect more than one speaker to any  one pair of     speaker terminals        Do not connect speakers with an impedance  lower than the speakers supplied  Please refer to  the SPECIFICATIONS section of this manual     IMPORTANT   The type plate is located on the rear of  the system     To avoid overheating of the system  a  safety circuit has been built in   Therefore  your system may switch to  Standby mode automatically under  extreme conditions  If this happens  let  the system cool down before reusing it        Step 3  Connecting TV set    707    svoo    voeon    Pace    Poveo    y                                     T  6           IMPORTANT      You only need to make one video  connection from the following options   according to the capabilities of your TV  system      S Video or Component Video  connection provides higher picture  quality  These options must be available  on your TV set      Connect the system dir
6.  a distortion at high  volume  If this occurs  deactivate DBB or reduce the  volume     Selecting sound effect    The digital sound effect allows you to select from  various preset modes that control the frequency  bands of sound to optimize certain musical  styles  It greatly enhances the excitement and  enjoyment of your favorite music     Press SOUND repeatedly to select the  available sound effect     Playing a DVD VCD   You can select Virtual Ambience Control  VAC   as follows        CONCERT  DRAMA  ACTION  SCI FI     Playing a CD MP3 WMA or in TUNER   TAPE or AUX mode   You can select Digital Sound Control  DSC        DIGITAL  CLASSIC  JAZZ  ROCK        Volume control    Changing the volume level    Rotate VOLUME clockwise   anti clockwise  or  press WOL      to increase or decrease the    volume level    gt     VOL MIN    is displayed at minimum level     gt  VOL MAX    is displayed at maximum level     Switching off the volume temporarily    Press MUTE     gt     MUTE ON    is displayed    Press MUTE again to cancel the MUTE mode    gt  MUTE OFF    will appear     Note   Press MUTE again or increase  decrease the  volume level to cancel the MUTE mode     Listening through headphones    Connecting headphones to 4  on the system  will switch off the speakers     Disconnecting the headphones will switch on  the speakers again        Switching on off    Switching the system ON    In Standby  Demonstration mode  Press STANDBY ON    gt  The system will go back to its previo
7.  all ages       Menu language  To set the screen display language  The default  setting is English       Default   If RESET is selected  all the items in the setup  menu will be reset to default setting  except  Parental Setting and Password     35    Tuner Operations    36    IMPORTANT     Make sure FM and MW antennas are  connected        Tuning to radio stations    Press TUNER to select FM    vvn TTA  e yes  WN AA    aa Ors    Press and hold  4   BB on the system or on  the remote control until the frequency indication  starts to change  then release      gt  The next radio station will be tuned  automatically     To tune a weak station  press  4   BB on the  system or on the remote control to search until  a radio station with sufficient signal strength is  found        Presetting radio stations    You can store up to 40 preset radio stations in  the memory  starting from FM and followed by  MW bands     Automatic preset programming    You can start automatic presetting from a  selected preset number     Press TUNER  BAND  to select TUNER mode     gt  The current radio frequency will appear on  the display     To begin automatic preset from a desired  preset number   Press 4   Bl or numeric keys  0 9  to  select the desired preset number        Press and hold PROGRAM for 3 seconds      AUTO SEARCHING    appears on the display     gt  PROG will start to flash     gt  The system will start to search all radio  stations on the FM band  then MW band     gt  All radio stations
8.  gt  Move to and press  gt  gt      gt  Move to one of the following and press  gt  gt          Audio  disc   s soundtrack       Subtitle  disc   s subtitles       Disc Menu  on screen menu        Press  amp    W to select a language and press OK      5  Repeat steps 3 4 for other settings     To remove the menu  Press SYSTEM MENU     Preparations    21    Disc Operations    IMPORTANT      This system is designed for regular  discs  Therefore  do not use any  accessories such as disc stabiliser rings or  disc treatment sheets  etc   as offered on  the market  because they may jam the  disc mechanism      Do not move the system during  playback  Doing so may damage the  system      Do not push on the disc tray or put  any object other than disc on the disc  tray  Doing so may cause the system to  malfunction      DVD discs and players are designed  with regional restrictions  Before playing  a disc  make sure the disc matches the  regional code of your player      According to the format requirement  of DVD or VCD  some operations may be  different or restricted        Playing discs    Press STANDBY ON    to switch on the  system  and then press DISC to select disc  mode     Power on the TV system and set to the correct  Video In channel  See Setting the TV set       You should see the blue Philips DVD  background screen on the TV set     Press OPEN CLOSE to open the disc tray and  load a disc respectively in the first two disc trays    To load the third disc  press DISC CHANG
9.  o connect headphones    MASTER VOLUME   o increase or decrease the volume     IR SENSOR  point the remote control towards this sensor   DISC TRAYS    OPEN CLOSE   o open or close the disc tray   DISC1  DISC2  DISC3   o select a disc tray for playback   DISC CHANGE   o change disc s     RECORD   o start recording on tape deck 2   AUTO REPLAY        In tape mode  to select continuous playback in  either REPLAY or PLAY mode only                OS O             15    Functional Overview       Remote control                                                 Notes        First  select the source you wish to control by  pressing one of the source select keys on the  remote control  DISC or TUNER  for example         Then select the desired function   gt  gt   d or  PI for example       D SOURCE       to select the relevant active mode  DISC1 2 3   TUNER  TAPE1 2 or AUX        TUNER  toggles between FM and MW band         DISC MENU  disc mode only        to enter or exit the disc contents menu     B  SYSTEM MENU  disc mode only       to enter or exit the system menu bar    16       lt  lt   prs aly       to select movement direction in disc contents  menu system menu bar        in tuner mode  to tune to lower or higher radio  frequency    4    gt  gt         in Disc mode  press to fast reverse forward the  disc    OR 72 I       in Disc mode  press to skip to the previous next   chapter track    in Tuner mode  to select a preset radio station   number   PLAY PAUSE Pil   o start or inte
10.  the TV screen for 5 seconds        Echo    This feature allows you to add echo while singing  or talking through a microphone       Press ECHO    gt     ECHO CONTROL ON    will be display on  the TV screen for 5 seconds     gt  Press VOL     to change the echo level  between 1 and 8     Select OFF to switch off Echo      Press ECHO again to exit ECHO CONTROL  mode     gt     ECHO CONTROL OFF    will be displayed  on the TV screen for 5 seconds    You can also press OK to exit ECHO CONTROL  mode           Notes        Echo will be disabled automatically when the  microphone is unplugged           PLEASE INSERT MIL    is displayed on your  TV screen if you have not connected the  microphone to the system in ECHO CONTROL ON  mode        Karaoke                    44    Connect a microphone  not supplied  to the  system to sing along with the music source           Connect a microphone to the MIC jack       gt     MICROPHONE PLUG IN    will display on  your TV screen          Before connecting the microphone  set the MIC    VOL  to the minimum level to prevent howling        Press DISC  1 2 3   TUNER  TAPE 1 2  or       AUX to select the source to be mixed and  start playback        Adjust the volume of the source through    VOLUME control         4  Adjust the microphone volume through MIC    VOL  control     Notes        Keep the microphone away from the speakers to  prevent howling           MICROPHONE PLUG OUT    will display on  your TV screen when you plug out the micropho
11.  with strong signal strength  will be stored automatically     gt  The system will stop searching when all  available radio stations are stored or when the  memory of 40 preset radio stations is full     gt  The first preset radio station will then be  played when completed        To stop storing the automatic preset    Press W to stop storing the automatic preset     Note       If no preset number is selected  automatic  preset will begin from    i      and all your former    presets will be overridden     Manual preset programming    Press TUNER  BAND  repeatedly to select the  desired tuner band  FM or MW     o      Press and hold  lt 4    gt  gt  on the system or on  he remote control to search a radio frequency          Press PROGRAM    gt     PROD    and     will display        Press    gt  or numeric keys  0 9  to  select the desired preset number           After selecting an address number  press  PROGRAM again to store the radio station       Repeat steps 3 5 to store other preset radio  stations     To stop storing the manual preset    Press on the system     Note       Ifyou attempt to store more than 40 preset  radio stations     FULL    will be displayed        Selecting a preset radio station      In tuner mode  press Md   BI or use the  numeric keys  0 9  to select the desired  preset number     gt  The preset number  radio frequency  and  waveband are displayed     Deleting a preset radio station       Press kd or P to select the preset radio station  to be er
12.  you leave the system in stop or pause  mode for 5 minutes  The default setting is ON     DVD Menu Operations    Philips provide you the DivX R  VOD  Video On  Demand  registration code that allows you to  rent and purchase videos using the DivX R   VOD service    For more information  visit    www divx com vod     NIGHT MODE SET TO OFF       ni      Select this when you want to enjoy the surround BEER  sound with its full dynamic range     On GOTO DIVX REGISTRATION SETUP  Select this to level out the volume  High volume   output will be softened and low volume output    In disc mode  press SYSTEM MENU   will be brought upward to an audible level  This  feature is only available for movies with Dolby  Digital mode     Press  4     gt   A   Y onthe remote    control to navigate in the menu      gt  Move to icon and press  gt  gt       gt  Move to    DivX  R  VOD        gt  Press OK on the remote control  the  registration code will appear           Select EM icon and press V        The system will start testing the speaker from  left speaker to right speaker cyclically until you  exit tone test           Use the registration code to purchase or rent  Notesi the videos from DivX R  VOD service      You can press  lt 4 lt 4 to exit test tone mode at www divx com  vod     any time Follow the instruction and download the video        Main volume can be adjusted during tone test DEE Rn    Helpful Hint    All the download videos DivX R  VOD can only be  played back on this system   
13. DVD Mini HiFi System FWD 792    User manual    tE FA abt BA    SPHiups       PHILIPS    CAUTION    Use of controls or  adjustments or  performance of procedures  other than herein may  result in hazardous  radiation exposure or  other unsafe operation                                                                                                                                                                                DEMO MODE    To turn ON To turn OFF    Press  amp  HOLD   button Press  amp  HOLD ea button    for 5 seconds for 5 seconds    P LU      amp  P LAY  for tuner installation    Follow instructions Press    PLAY       Plug in the unit in the display       Manufactured under license from Dolby Laboratories      Dolby        Pro logic    and the double D symbol are trade     marks of Dolby Laboratories     MANUFACTURED UNDER LICENSE FROM DIGITAL  THEATER SYSTEMS  INC  US PAT  NO 5 451 94   5 956 674  5 974 380  5 978 762  6 226 616 6 487 535  AND OTHER U S AND WORLDWIDE PATENTS ISSUED  AND PENDING     DTS   AND    DTS DIGITAL SURROUND     ARE REGISTERED TRADEMARKS OF DIGITAL THEATER  SYSTEMS  INC  COPYRIGHT 1996  2003 DIGITAL  THE  ATER SYSTEMS  INC  ALL RIGHTS RESERVED     This product incorporates copyright protection technology  that is protected by method claims of certain U S  patents  and other intellectual property rights owned by Macrovision  Corporation and other rights owners  Use of this copyright  protection technology must be authorized by Macrovisio
14. E    gt  The disc tray will rotate until the empty tray is  ready for loading      gt  Make sure the disc label is facing up  For  double sided discs  load the side you want to  play facing down           oO C  A  A   O   j                Press OPEN CLOSE to close the disc tray    gt     TISC READING  will be displayed     gt  In the stop mode  press DISC 1 2 3 on the  remote control repeatedly to select DISC 1   DISC 2 or DISC 3 cyclically       Some discs can play automatically  For discs with  Table Of Contents  a menu may appear on the  TV screen  When the menu is displayed  press  44  gt  gt   A   V keysto highlight your  selection and press OK to confirm  To select a  play option  press numeric keys  0 9      gt  If the disc is locked by parental control  you  must enter your four digital password  See  Changing the password         Press  gt II to start playback     For MP3  DiVX WMA    Load an MP3  DIVX  WMA disc in the disc tray     gt  Press DISC MENU to select menu on off     Notes        Load discs with the label side facing up        To ensure good system performance  wait until  disc reading is completed before proceeding        Using the disc menu    For disc with Table Of Contents  a menu may  appear on the TV screen once you load the disc     To select a playback feature or item     Press      gt    gt    A   Vornumeric keys   0 9  on the remote control  then press BI or  OK to start playback     To access or remove the menu    Press DISC MENU on the remote c
15. Lens Cleaner  or any commercially available cleaner  Follow the  instructions supplied with cleaner   Finding a suitable location       Place the player on a flat  hard  stable surface   Cleaning the head and the tape paths  To ensure good recording and playback quality   clean the head  a   the capstan s   B   and  pressure roller s     after every 50 hours of tape  operation   Use a cotton swab slightly moistened with  cleaning fluid or alcohol    You also can clean the head by playing a cleaning  tape once    Demagnetising the head                                      Use a demagnetising tape available at your dealer   The apparatus shall not be exposed to dripping  or splashing and no objects filled with liquids   such as vases  shall be placed on the apparatus   Install this unit near the AC outlet and where the  AC Power can be reached easily    When the system is switched to standby mode  it  is still consuming some power To disconnect the  system from the power supply completely   remove the AC power plug from the wall  sockets     Connections    10          Step 1  Placing speakers          Prost speaker  speaker Vv  heres i t right        VIEWING AREA          Place the front left and right speakers at equal  distances from the TV set and at an angle of  approximately 45 degrees from the listening  position        Notes        To avoid magnetic interference  do not position  the front speakers too close to your TV set        Allow adequate ventilation around the DVD
16. Preparation for recording    Load a recordable tape into tape deck 2 with  the full spool to the left     Prepare the source to the recorded    DISC   load the disc s    TUNER  tune to the desired radio station   TAPE   load the prerecorded tape into tape  deck 1 with the full spool to the left    AUX   connect external equipment        Press DISC  TAPE  TUNER or AUX to select  the source     Start to play the selected source     Press REC to start recording     To stop recording  Press W on the system        Disc synchro recording    Press DISC to select the disc    You can record programmed tracks in the order  you want    Press REC to start recording     gt     REL    will flash  but the first 7 seconds of the  start passage will not be recorded     Selecting another track during recording       Press PIL     Press or PH to select another track     To stop recording   Press I      gt  Recording and disc playback will stop  simultaneously     Tape Operation Recording    39    Clock Timer Operations    40                                                 POOO  0000       0             L  A  ON          GA                                                                Viewing the clock    The clock  if it is set  will be shown in Standby  mode  Press CLOCK TIMER to view clock in  any source mode     Press DISPLAY on the system to select 12   hour or 24 hour mode       f the clock has not been set            will blink  until you set the clock     Setting the clock   see Prepara
17. You can play the contents of the disc in the  order you want  At most 99 tracks can be  stored     Load the desired discs on the disc trays     Press the DISC button to select the disc tray     gt  Programming can only be done on the  selected disc    While playback is stopped  press PROGRAM  to enter program mode     eo mm mm    gt  P uu    uu   is displayed     Use the numeric keys  0 9  to input the track  number in the order you want      gt  If you attempt to program more than 99  tracks  FULL    is displayed     Press OK to store the track   Repeat steps 3 5 to store other tracks     Press PII to play the program    To stop playback  press W once    To exit the program mode  press W again   Note         This function is not available for DVD or MP3   DIVXI WMA discs     Disc Operations       For DVD or MP3  WMA   reverse   FR X2     FR X4     FR X6     FR X8    Changing discs during playback             Press DISC CHANGE      PLAY    gt  The disc tray will open without interrupting  forward   FF X2     FF X4     FF X6     FF X8  playback      PLAY  QO T change the inner disc  press DISC  CHANGE again  For SVCD VCD or CD    gt  The active disc will stop playing and the disc  reverse   FR X1     FR X2     FR X3     FR X4  tray will close to retrieve the inner disc  then     PLAY  reopen with the inner disc accessible   forward   FF X1     FF X2     FF X3     FF X4      PLAY  Special DVD VCD features    To resume normal play  press PHI   Changing subtitle language Displayi
18. ame      To exit without storing the setting  Press W on the system     To deactivate the timer   Press and hold CLOCK TIMER until    SELECT  CLOCK ORTIMER    is displayed      gt  Press kd or Bl to change the display to     TIMER         gt  Press CLOCK TIMER again to confirm     gt   TIMER DFF    will be displayed and TIMER    Notes        If the source is disc mode  playback will begin  with the first track of the last selected disc or other  trays if the disc is empty  If all disc trays are empty   the system will automatically switch to Tuner mode       During timer setting  if no button is pressed  within 10 seconds  the system will exit timer setting  mode automatically        When the system is powered on  if the  memorized volume level is less than 8  the system  will automatically adjust to 8 increasingly  If the  memorized volume level is more than 20  the  system will adjust to 20        The timer will be cancelled when the power cord  is disconnected or if a power failure occurs        Viewing the timer    Press CLOCK TIMER twice to view timer in  any source mode  Timer will be shown on the  display for 5 seconds    If timer have not been set     NiO TIMER    will   be displayed for 5 seconds     Timer Operations       Setting the sleep timer    The sleep timer enables the system to switch to  Standby mode automatically at a preset time     Press SLEEP on the remote control repeatedly  and stop at the desired preset turn off time     gt  Following options are ava
19. ased       Press m on the system     PRESET DELETED     appears on the display     gt  The preset numbers of all other preset radio  stations in the band with higher numbers are  also decreased by one      Repeat steps 1 2 to erase other preset radio  stations     o   2         Tuner Operations       Changing tuning grid    n some countries  the frequency step between    Hz in some areas   The preset frequency step  he factory is 9 kHz     Plug the AC power cord   Press TUNER to select MW mode        Press and hold ll on the system for more than  seconds     gt  STEP XX K    appears    Note         All preset stations will be lost and need to be  reprogrammed     adjacent channels in the MW band is 9 kHz  10    in    3    37    Tape Operation Recording    IMPORTANT  Rewinding or forwarding fast when    Before playing a tape  check and playback is stopped   tighten slack tape with a pencil  Slack  tape may get jammed or may burst in  the mechanism      Store tapes at room temperature and    Press m when you reach the desired passage   do not put them too close to a magnetic    field  for example  a transformer  TV set  or speaker       In stop mode  press MI        Press  4 or  gt  gt  on the front panel or on the  remote control     Resetting tape counter number          Tape playback General information on    recordin     Press 4 to open the tape deck door 8      If you don t intend to record via the  microphone  unplug it to avoid unwanted  recording source        Insert a 
20. ata  Sampling frequency numerically  represents how many times the original analog  signal is sampled per second        Surround  A system for users to create  realistic three dimensional sound fields full of  realism by arranging multiple speakers around  he listener        Title  The longest section of a picture or music  feature on DVD  music  etc   in video software  or  he entire album in audio software  Each title is  assigned a title number enabling you to locate   he title you want     VIDEO OUT jack  Jack on the back of the  DVD System that sends video to TV              
21. ayback and press SYSTEM    MENU        Select iy icon and press V      Press 4   PP   A V keys on the remote    control to toggle through the functions and  select your preferred option       gt  Move to and press  gt  gt      gt  Move to    TV System    and press  gt  gt      AUTO       Select this if the connected TV set is  compatible with both NTSC and PAL  multi  system   The output format will be consistent  with the video signal of the disc     NTSC       Select this if the connected TV set is NTSC  system  It will change the video signal of a PAL  video disc and output to NTSC system     PAL      Select this if the connected TV set is PAL    system  It will change the video signal of an  NTSC disc and output to PAL format        Select an item and press OK     To remove the menu  Press SYSTEM MENU        Step 4  Setting language  preference    You can select your preferred language settings  so that this DVD Mini Hi Fi System will  automatically switch to the language for you  whenever you load a disc  If the language  selected is not available on the disc  the language  set by default will be used instead  But the menu  language of the DVD Mini Hi Fi System cannot  be changed once selected     AUDIO ENGLISH  SUBTITLE ENGLISH    DISC MENU ENGLISH    DIVX R  VOD    GO TO LANGUAGE SETUP PAGE          In disc mode  stop playback and press SYSTEM  MENU        Select gy icon and press V       Press  4  PP  A V keys on the remote  control to select your preferred option    
22. back      27                Q    MP3  WMA  DivX  Picture Disc Operations       Playing DivX disc  There are two types of subtitle available on DivX  disc  embedded subtitle and external subtitle     Load a DivX disc     gt  The DATA CD MENU appears on the TV    screen     DATA CD MENU    zj DivX MOVIE 1               When playing DivX disc with embedded  subtitle    Press A   W to select DivX Movie  and then  press OK to start playback     When playing disc  press SUBTITLE button on  the remote control to select  SUBTILTE 1 8      SUBTILTE 2 8     SUBTILTE 3 8     SUBTILTE  4 8     SUBTILTE 5 8     SUBTILTE 6 8      SUBTILTE 7 8     SUBTILTE 8 8     SUBTILTE  OFF              Note    The maximum number of subtitle languages  stipulated by the manufacturer is 8 8     When playing DivX disc with external  subtitle   Press A   W on the remote control to select an  external subtitle option      Press SUBTITLE to select subtitle file           DivX SUBTITLE SELECTED    appears on the  TV screen    Press A   W to highlight the movie file  and  press OK to confirm      gt  The playback will start accordingly        During playback  you can zoom the picture by    selecting zoom icon from the menu bar and  press W to select ZOOMX2 or ZOOM OFF     Notes      During playback  press SUBTITLE button on  remote control to select available font  SUBTITLE  1 1  ENCODING LATIN 1  ENCODING LATIN 2   ENCODING CYRILLIC  SUBTITLE OFF      If an external subtitle has been selected  the DivX  embed
23. cannot be made    The tape deck door cannot open  Left and right sound outputs are    reversed     The remote control does not function     The display is dark    The timer is not working    The Clock Timer setting is erased    v    Vv    SAY AS AS SS IN    Ss    SSS    x    SESESES    Wo Ww oS    Multi language sound or subtitle is not recorded  on the DVD    Changing the language for the sound or subtitle  is prohibited on the DVD     ake sure the component is connected  correctly    Press the correct function button for the input  source     Adjust the volume    Disconnect the headphones    Check that the speakers are connected correctly   Check if the stripped speaker wire is clamped    f the system is in pause  slow motion or fast  forward reverse mode  press PII to resume the  normal play mode    ake sure the MP3 CD was recorded within 32   256 kbps bit rate with sampling frequencies at  48 kHz  44 1 kHz or 32 kHz     f the signal is too weak  adjust the antenna or  connect an external antenna for better  reception    ncrease the distance between the System and  your TV set or VCR        Clean deck parts  see    Maintenance       Use only NORMAL tape    Apply a piece of adhesive tape over the missing  tab space     Remove and reconnect the AC power plug and  switch on the system again     Check the speaker connections and location     Point the remote control at the remote control  sensor of the unit    Reduce the distance to the player    Remove any possible obstacles 
24. ception  connect an  outdoor FM antenna to the FM ANTENNA  terminal        p   Do Q  eee                JO       Notes        Adjust the position of the antennas for optimal  reception        Position the antennas as far as possible from  your TV set VCR or other radiation sources to  prevent unwanted interference     Connections       Step 5  Connecting the power  cord                               jut                                     After everything is connected properly   plug in the AC power cord to the power  outlet     Never make or change any connection with the  power switched on     On the DVD Mini Hi Fi System      AUTO INSTALL PRESS PLAY    may appear  on the display panel  Press H on the front panel  to search and store all available radio stations or  press lll to exit  See Tuner Operations Presetting  radio stations                           If your system is equipped with a OUTAGE  Voltage Selector  set the  VOLTAGE SELECTOR to the s10v   1270V 220V 240V             local power line voltage     AUTO INSTALL PRESS PLAY           5 A             13    Connections          Step 6  Connecting aVCR or Step 7  Connecting digital audio  cable satellite box equipment                                          Cable Satellite  ox                                                                                        Viewing and listening to playback Recording  digital        Connect the VCR or Cable Satellite Box to the Connect the system s DIGITAL OUT jack to the  TV 
25. ded subtitle will be deactivated      This model supports LATIN 1  LATIN 2  and LATIN  CYRILLIC fonts      LATIN 1 font supports the following languages   Albanian  Basque  Catalan  Danish  Dutch  English   Faeroese  Finnish  German  Icelandic  Irish  Italian   Norwegian  Portuguese  Rhaeto Roamanic  Scottish   Spanish  Swedish  Afrikaans and Swahili      LATIN 2 supports the following languages   Bosnian  Croatian  Czech  Hungarian  Polish   Romanian  Serbian  Serbo Croatian  Slovak   Slovenian  Upper Sorbian and Lower Sorbian      LATIN CYRILLIC font supports the following  languages  Russian  Ukrainian and Belarusian      Subtitle files with the following filename extension  are supported   sub   srt and  smi     29    DVD Menu Operations       Using the menu bar Slow   The slow motion speed will display  Press W   repeatedly to select a reverse or forward   the menu bar on the TV screen without slow motion speed    interrupting the disc playback  But when you To cancel the slow function  press PIL   enter  jy  SETUP MENU   the playback will ZOOM  Press W repeatedly to select an enlarged pic    Pas ure ratio  1 5 2 or 4  You can press  lt  lt       gt  gt   A   Y to move within the enlarged   picture on the TV set    To resume normal playback  repeat the above   step to select ZOOM OFF    ANGLE   Press W to view the same scene from differ    ent angles if the DVD is recorded with multi    angles    STEP   Press W repeatedly to play forward the disc   step by step  one fram
26. e every step   To cancel            You can continue some operations directly via                                  In disc mode  press SYSTEM MENU  ent function press PIN    gt  The menu bar will appear across the top of Press W to select PBC ON or OFF  and then    the TV set screen  playback will stop automatically   Only for  a Ge ee A VCD SVCD discs        Press the  lt  lt     gt  gt    A   Von the remote  control to navigate in the menu     gt  Press  lt  lt     gt  gt  to move through the menu  bar     gt  Press W to enter the selection        Press OK to confirm the selection     gt  Playback will resume or begin automatically     To remove the menu  Press SYSTEM MENU or OK     IMPORTANT      Some operations may be different or  restricted according to the disc format   Refer to the jacket or care of the disc you  are playing     30          o       Using the setup menu  user  preference settings     This DVD setup is carried out via your TV set   enabling you to customize the DVD Mini Hi Fi                                                 System to suit your particular requirements   et  See  o 1 IT    E  0 9     QK H  72 DRS   o    WO     ugs cm  ooe  In disc mode  press SYSTEM MENU     gt  The menu bar will appear across the top of    the TV screen     Select jj icon and press W to enter the setup  menu  Then press A   W to select one of the  setup menu options and press  gt    to enter the  menu     gt  Playback will pause     gt   amp  4 om     gt   v    Picture Se
27. ectly to the TV  set     Using Video In jack  CVBS     Use the composite video cable  yellow  to  connect the system   s WIDEO jack to the video  input jack  or labeled as A V In Video In   Composite or Baseband  on the TV set    To listen to TV channels through this system  use  the audio cables  white red  to connect AUX  IN  L R  jacks to the corresponding AUDIO  OUT jacks on the TV set    Deactivate Progressive Scan through SYSTEM  MENU  Refer to Using the Setup Menu  Using  Progressive Scan to improve image quality     Connections        Bor       an oe     D    C                                           ri      E                Using component Video In jack  Pr PbY     Use the component video cables  red blue   green  to connect the system s Pr PbY jacks to  he corresponding Component video input jacks  or labeled as Pr Cr Pb CbY or YUV  on the TV  set    To listen to TV channels through this system  use  he audio cables  white red  to connect AUX  IN jacks to the corresponding AUDIO OUT  jacks on the TV set    If you are using a Progressive Scan TV set  TV  with Progressive Scan or ProScan capability    activate the PROGRESSIVE SCAN function  through SYSTEM MENU        11    Connections    12        7359r                                        T      l             Using S Video In jack    Use the S Video cable  not supplied  to connect  he system s S VIDEO OUT jack to the S   Video input jack  or labeled as Y C or S VHS  on  he TV set    To listen to TV channels throu
28. en  you use the DIGITAL AUDIO OUT COAXIAL  or OPTICAL jacks  These jacks send audio  through multiple channels  instead of just two  channels as analog does     Dolby Digital  A surround sound system  developed by Dolby Laboratories containing up  to six channels of digital audio  front left and  right  surround left and right and center      DTS  Digital Theater Systems  This is a surround  sound system  but different from Dolby Digital   The formats were developed by different  companies     JPEG  A still picture data compression system  proposed by the Joint Photographic Expert  Group  which features small decrease in image  quality in spite of its high compression ratio     MP3  A file format with a sound data  compression system     MPE    is the abbreviation of  Motion Picture Experts Group 1  or MPEG 1   Audio Layer 3  Through the MP3 format  one  CD R or CD RW can contain about 10 times as  much data volume as a regular CD can                 Region code  A system allowing discs to be  played only in preset regions  This unit will only  play discs that have compatible region codes  You  can find the region code of your unit from the  product label  Some discs are compatible with  more than one region  or ALL regions         S Video  Produces a clear picture by sending  separate signals for luminance and the color You  can use S Video only if your TV set has S Video  In jack     Sampling Frequency  Frequency of data  sampling when analog data is converted to  digital d
29. est features in home  theater technology     Other features include   Built in DTS and Dolby Digital decoder   supporting stereo     Additional Component Connections e MP3 Pro and MP3 with ID3 tag   Lets you connect other audio and audio visual   components to the system so you can use the  gt    system s surround sound speakers      VIDEO CD       Ben CEE ae dee Gee  Lets you compress the dynamic range  reducing eu nel       the difference in loudness between different  sounds in Dolby Digital mode           Region codes  Parental control  rating level    Lets you set a rating level so that your children  cannot watch a DVD that has a rating higher  than you set     DVDs must be labeled for ALL regions or for  Region 3 in order to play on this system  You  cannot play discs that are labeled for other             regions   Sleep timer  Enables the system to switch to standby mode  automatically at a preset time   Notes   Progressive Scan     For mixed mode discs  only one mode will be  Provides high quality flicker free images for film selected for playback according to the recording  based sources  When a picture refreshes  its format   vertical resolution can double to 525 lines      If you are having trouble playing a certain disc   remove the disc and try a different one  Improperly  Note  formatted discs will not play on this system       To fully enjoy the progressive scan feature  you  need a progressive scan TV  Supplied accessories  Discs for playback     Composite v
30. g the system menu   Playing in slow motion mode   Zooming in   Viewing from another angle   Advancing by frames   Checking the contents of DVD  Special VCD SVCD features oo    27   Playback control  PBC           MP3  DIVX WMA  Picture Disc    Operations  Playing MP3  WMA  Picture disc  Kodak  er        Playing DIVX disc             Basic Functions  Plug and Play  for tuner installation        Demonstration mode          Preparations   Step 1  Inserting batteries into the remote  Control cassis ccseseccansscsarsscseancoedscsssacstsvinasisbacuscgusdattuss  Step 2  Setting the clock      Step 3  Setting the TV set    Step 4  Setting language preference                 21          Disc Operations   Playing dises 2 35 22  ae   Using the disc menu   Basic playback controls     Skipping to another title  track  chapter  Fast search          DVD Menu Operations  Using the menu bar     Using the setup menu user preference settings   EN OR EEE EEEE 31 35   Setting the TV shape   Using progressive scan to improve image   quality   Setting the screen saver   Night mode   turning on off   Test Tone   DivX R  VOD   Changing the password       Restricting playback by setting parental level    Contents          Tuner Operations Specifications         neeee 45  Tuning to radio stations  Presetting radio stations   Automatic preset programming          Troubleshooting              46 47    Manual preset programming  Selecting a preset radio station    37 Glossary    48  Deleting a preset radi
31. gh this system  use  he audio cables  white red  to connect AUX  IN jacks to the corresponding AUDIO OUT  jacks on the TV set    Deactivate Progressive Scan through SYSTEM  MENU  Refer to Using the Setup Menu  Using  Progressive Scan to improve image quality             RF coaxial cable to TV                                     Antenna or  Cable TV signal                                              Di    i             IMPORTANT        If your TV set only has a single  Antenna In jack  or labeled as 75 ohm or  RF In   you will need a RF modulator in  order to view the DVD playback via TV   See your electronics retailer or contact  Philips for details on RF modulator  availability and operations     Using an accessory RF modulator    Use the composite cable  yellow  to connect the  system s VIDEO jack to the video input jack on  the RF modulator    Use the RF coaxial cable  not supplied  to  connect the RF modulator to your TV s RF jack   Deactivate Progressive Scan through SYSTEM  MENU  Refer to Using the Setup Menu  Using  Progressive Scan to improve image quality           Step 4  Connecting FM MW  antennas    fix the claw  into the slot        MW  antenna                                      iO  Oi               Connect the supplied MW loop antenna to the       MW Jack  Place the MW loop antenna on a  shelf or attach it to a stand or wall    Connect the supplied FM antenna to the FM  jack  Extend the FM antenna and fix its end to  the wall           For better FM stereo re
32. ideo cable     yellow    Your DVD Mini Hi Fi System will play       Digital Video Discs  DVDs        Video CDs  VCDs        SuperVideo CDs  SVCDs      Audio cables  white  red        Digital Video Discs   Rewritable  DVD RW        Compact Discs  CDs         Component video cables  red blue green         FM wire antenna                  Picture  Koda   JPEG  files on CDR W      MW loop antenna       DivX R  disc on CD R W         DivX 3 11  4 x and 5 x     Remote Control and       WMA two AA batteries       Supported MP3 CD format    e ISO 9660   UDF format     AC power cable   e Max  title album name  12 characters   e Max  nested directory is 8 levels      This instruction booklet and a     The max  album number is 32  Quick Use Guide    General Information Maintenance       Environmental information    Any unnecessary packaging has been omitted   We have tried to make the packaging easy to  separate into three materials  cardboard  box    polystyrene foam  buffer  and polyethylene  bags   protective foam sheet     Your system consists of materials which can be  recycled and reused if disassembled by a  specialised company  Please observe the local  regulations regarding the disposal of packaging  materials  exhausted batteries and old  equipment        Care and safety information    Avoid high temperatures  moisture   water and dust   Do not expose the system  batteries or discs to  humidity  rain  sand or excessive heat  caused by  heating equipment or direct sunlight   Al
33. ifferent  types of batteries in combination      Batteries contain chemical substances   so they should be disposed of properly        Preparations       Step 2  Setting the clock   The clock can be set in either 12 hour or 24   hour mode  PM 00 00     example      or    00 00    for       The clock can be set in any source mode     gt  If you have not set the clock              will be  shown on the display                   Press and hold CLOCK TIMER until  SELECT  CLOCK OR TIMER    is displayed     gt  Press kd or BI to change the display to     CLOCK          gt  Press CLOCK TIMER again to confirm        Press ka or P on the system to set the  hours        Press  lt 4 or  gt  gt  on the system to set the  minutes        Press CLOCK TIMER to confirm your setting   The system will store the setting automatically  and go back to it   s previous status     gt  The time setting becomes effective   Note       InAUX mode  setting clock using remote control  is not possible     To exit the setting without storing  in  standby mode      Press Mon the system to exit    gt     CHNCEL    will appear on the display      Press STANDBY ON to exit setting mode and  go into POWER ON mode      You can also press DISC  DISC1 3  DISC  CHANGE  OPEN CLOSE to exit setting  mode and go into disc mode      The system will also exit setting mode and go to  TUNER  TAPE or AUX mode when you press  the corresponding source button     Viewing the clock in any source mode     When you have set the cloc
34. ilable  time in  minutes      9 au HS au SO     ie or    gt     SLEEP    will show on the display panel  unless    OFF    is selected     To check or change the setting   Press SLEEP once to show the remaining time  before switching off  If you continue pressing the  SLEEP button  the next Sleep Timer option will  appear on the display     To cancel the sleep timer  Press SLEEP repeatedly until    OFF    is displayed   or press the STANDBY ON button     41    Sound and Volume Controls    42       Sound control    MAX sound provides the best mixture of  various sound features     Press MAX SOUND on the system or MAX  button on the remote control to achieve optimal  sound      gt  When MAX sound is activated  MAX icon  will blink and    MAX CIN    will appear on the  display for 3 seconds  MAX LED will be lighted   Press MAX SOUND or MAX button again to  deactivate MAX function      gt  When MAX sound is deactivated     MAX   OFF    will appear on the display for 3 seconds   MAX LED and MAX icon turn off     Note       When MAX sound is selected  other sound  modes will be switched off automatically     DBB  Dynamic Bass Boost     To enhance the bass response  press DBB once  or more to select your option  DBB 1  DBB 2   DBB 3 or DBB OFF       gt  Display shows DBB level briefly if DBB is  activated  DBB icon lights up      gt     IEE OFF    appears if DBB is deactivated   DBB icon turns off     Note        Some discs or tapes might be recorded in high  modulation  which causes
35. io station automatically     18       Demonstration mode    The system has a demonstration mode that  shows various features offered by the system     Activating demonstration   In Standby mode  press and hold STOP E for  more than 5 seconds to activate demo mode     gt     TEMO ON    is displayed      gt  Demonstration will begin     Deactivating demonstration  Press and hold STOP E on the system until     PEMO m    i DFF    is displayed     gt  The system will switch to Standby mode     Note        Even if you remove the AC power cord and  reconnect it to the wall socket  the demonstration  will remain off until you activate it again     0  12           IMPORTANT      Make sure to complete the  preparation procedures before operating  the system        Step 1  Inserting batteries into  the remote control             Open the battery compartment     Place two batteries  Type R06 or AA  in the  compartment with the correct polarity as         indicated by         and           symbols                 Close the cover     Using the remote control to operate the  system    Point the remote control directly  at the remote sensor  IR  on the  front panel     Select the source you wish to  control by pressing one of the  source select buttons on the  remote control  for example  TAPE1 2  TUNER      Then select the desired function  for example    PILA or P      CAUTION      Remove batteries if they are  exhausted or will not be used for a long  time      Do not use old and new or d
36. k  press CLOCK   TIMER to view clock  Press DISPLAY on the  system to toggle between 12 hour and 24 hour  modes     gt  The time will be displayed for 5 seconds and  then go back to it s previous status     19    Preparations    20    Notes        The clock will be cancelled when the power cord  is disconnected or if a power failure occurs        During clock setting  if no button is pressed  within 10 seconds  the system will exit the setting  mode and go back to it   s previous status        Step 3  Setting the TV set    IMPORTANT      Make sure you have completed all the  necessary connections   See Connections    Connecting TV set     Press DISC  DISC 1  2  3  on the front panel   or press DISC 1 2 3 on the remote control      Turn on the TV set and set to the correct Video   In channel  You should see the blue Philips DVD  background screen on the TV set      gt  You may go to channel 1 on your TV set  then  press the channel down button repeatedly until  you see the Video In channel      gt  Or you can use the TV remote control to  select different video modes      gt  Or set TV to channel 3 or 4 if you are using  an RF modulator    Selecting the color system that matches  your TV set    This DVD Mini Hi Fi System is compatible with  both NTSC and PAL  For the playback of a DVD  disc on this DVD Mini Hi Fi System  the color  systems of the DVD TV set and DVD Mini Hi Fi  System should match     TV SHAPE    P SCAN    SCR SAVER       SETTO MULTI       In disc mode  stop pl
37. lect various sound effect       DISPLAY OSD       to display disc information during disc playback   PROGRAM       in disc mode  to program favorite tracks        in tuner mode  to program favorite stations      9  CLOCK TIMER      to view and set clock  timer    TAPE DECK 1 2   ay DBB  Dynamic Bass Boost        to select the desired DBB level  DBB 1  DBB 2   DBB3 or DBB OFF      2  AOPEN       to open the tape deck door     43  MAX SOUND              To activate or deactivate MAX sound   STOP m  torDIS Crane o stop playback or to clear a  programme   for DEMO    u  in Standby mode  to activate   deactivate demonstration   for PLUG amp PLAY       on the system only  to exit  plug amp play mode   for DISC           to stop playback         Functional Overview    9  gt  ae          for DISC o start or interrupt playback   for TAPE   to start playback   for PLUG amp PLAY    on the system only  to initiate    plug  amp  play mode   PREV   PRESET   NEXT  lt   gt          TITLE         fOr BISC ua o select previous next title   chapter or track during  playback    for TUNER    nu o select a preset radio  station     for CLOCK TIMER    to set the hour     AD SEARCH TUNING  lt  lt     gt  gt     ALBUM         FOP DISC iaiia to search backward forward   to select previous next  album in MP3 WMA stop  mode  with MENU ON        to rewind or fast forward        to tune to a lower or higher  radio frequency    for CLOCK TIMER    to set the minute        for TAPE  for TUNER              Q 
38. m     TV SHAPE  TV SYSTEM    SCR SAVER    P SCAN NOW OFF       OFF  Select this if a conventional TV set is connected  to your system     ON  To enjoy the full quality potential offered by  progressive scan feature     Notes        A progressive scan TV set is required        The progressive scan video quality is only  possible through PrPbY output connection     Helpful Hints        Ifa blank  distorted TV screen appears  wait for  15 seconds for auto revocer        To deactivate the progressive scan function  use  the menu on the TV screen     ACTIVATING PROGRESSIVE   1 Ensure your TV has progressive scan   2 Connect with YPbPr GBR video cable   3 If there is blank screen on normal TV  wait 15 seconds for auto recover    CANCEL    OK Select       0       Confirm again to use progressive scan  If picture is good press OK button on remote control    CANCEL    To deactivate progressive   1  Press and hold    OPEN CLOSE    key   2 Press 1 Key     lt 4 P Move OK Select       To deactivate Progressive Scan manually  f the progressive function is activated  but your  TV does not support progressive function or  PrPbY cable is not connected accordingly  there  will be a blank screen     n stop mode  press OPEN CLOSE on the  front panel to switch open the disc tray     Press numeric key    1        gt  The blue Philips DVD background appears on  he TV screen     Setting the screen saver          TV SYSTEM  P SCAN    ER NOW ON    If set to ON  the screen saver will be activated  when
39. m a highlighted selection   To exit  press SYSTEM MENU     0    IMPORTANT    Some operations may be different or  restricted according to the disc format   Refer to the jacket or case of the disc you  are playing     Note       When you press a button and NW appears on the    TV screen  this means the function is not available  on the current disc or at the current time     Playing in slow motion mode    T a    a     4 2 PAC       SF KA    For DVD    Select    from the menu bar and press Y  repeatedly to select the required slow motion  speed    SF X 1 2     SF X 1 4     SF X 1 8     SR X 1 2      SR X 1 4     SR X 1 8     PLAY   SF   slow forward   SR   slow reverse    For VCD    Press W to select the required slow motion  speed     forward   SF X 1 1     SF X 1 2     SF X 1 3     PLAY    Press BI to cancel the slow function     Note       This function is not available for CD or MP3   WMA disc     This function allows you to enlarge the picture  on the TV screen and pan through the enlarged  image     T D gt  4 1 PBC     lt   gt        v    4    4  ZOOM x4  4    ZOOM OFF    Disc Operations       Select EX from the menu bar and press W Checking the contents of DVD    Pa Eee following zooming    Press DISC MENU on the remote control  le     TR X15 ZOOM X2    ZOOM X4   If the current title has a menu  the menu will  ZOOM OFF appear on the screen  Otherwise  the disc menu  will be displayed   O T pan through the enlarged image  press       Press  4    gt  gt    A   Y to select 
40. mode  press SYSTEM MENU      Select EI icon and press V        Use  lt  lt     gt    A   Y onthe remote control    to navigate in the menu      gt  Move to fj icon and press  gt  gt      gt  Move to    PARENTAL    and press  gt  gt      PARENTAL    MENU LANG       o          DVD Menu Operations    Use the numeric keys  0 9  to enter the four   digit code You may have to enter the same code  twice      gt  If not successful  see Using the Setup Menu    Changing the password     Press A   W to select a rating level between 1 8  and press OK      gt  DVDs rated above the level you select will  not play unless you enter your four digit  password or choose a higher level rating  Select     No Parental    to deactivate Parental level and  have all discs play     PASSWORD    MENU LANG  DEFAULTS    NO PARENTAL  8 ADULT       Press SYSTEM MENU again to remove the    menu     Rating explanations   NO PARENTAL   It will play all discs    8 ADULT   material for adults only  viewed  only by adults due to graphic sexual scenes   violence  or language    7 NC 17     No children under age 17  not  recommended for children under age 17    6 PG R     Parental Guidance     Restricted   recommended that parents restrict children  under 17 from viewing or allow them to view  only when supervised by a parent or adult  guardian    4 PG 13     Material is unsuitable for children  under age 13    3 PG     Parental Guidance suggested    1 G   General Audience  recommended as  acceptable for viewers of
41. n  Corporation  and is intended for home and other limited  viewing uses only unless otherwise authorized by  Macrovision Corporation  Reserve engineering or disassem   bly is prohibited        Contents       General Information     Maintenance  Featuress    teeren S cubis 8  Discs for playback        Region codes  Supplied accessories        nunnensenssensseneenseenneenn  Environmental information  Care and safety information                    Connections  Step 1  Placing speakers  Step 2  Connecting speakers  Step 3  Connecting TV set  Using Video In jack  CVBS   Using Component Video In jack  Pr Pb Y   Using S Video In jack  Using an accessory RF modulator  Step 4  Connecting FM MW antennas    Step 5  Connecting the power cord  Step 6  Connecting aVCR or cable satellite             Step 7  Connecting digital audio equipment  14       Functional Overview  Controls on the system        unenensensenneenn 15  Remote control       c cccssssssssessesseceeseeseeeeeeees 16 17    Continuing playback from the last stop point  Selecting various mode functions              23 24   Repeat play mode   Shuffle play mode   Repeating a section within a chapter track  Programing favorite tracks nennen  Changing discs during playback       Special DVD VCD features   Changing subtitle language   Changing sound track language   Searching for a particular passage   Displaying the disc information during playback   Moving to another title  track    chapter   Playing from a selected point   Usin
42. ne        Listening to external sources    Connect the audio out terminals of the external  equipment  TV  VCR  Laser Disc player DVD  player or CD Recorder  to the AUX IN  terminals of your system     Press AUX to select AUX mode directly     gt     AUX    will be displayed     Notes        You are advised not to listen to and record from  the same source simultaneously        All navigation sound control features are  available        AMPLIFIER SECTION  Output power         3600 W PMPO  Stereo mode wee 2X175 W RMS       Frequency Response   180 Hz   16 kHz     3 dB  Signal to Noise Ratio             gt  60dB  A weighted   Input Sensitivity    AUXIN IN aan 500 mV  Output Sensitivity   Headphone    1000 mV   2dB mV   ine Out  450 mV     550 mV  TUNER SECTION    Tuning Range  een  wenn FM 87 9     108 MHz   50 kHz steps   MW 531     1602 kHz  9 kHz steps      MW 530     1710 kHz  10 kHz steps   Signal to Noise Ratio     FM   55 dB  MW   35 dB                               TAPE SECTION  Frequency Response  Normal tape  type 1     125Hz 8 Kz  Signal to Noise Ratio  Normal tape  type 1   Wow and flutter ne     au 2 45 dBA     0 35  DIN          DVD SECTION   kaserilypeaa sea Semiconductor  Disc Diamete au  12cm   8cm  Video Decoding      Video DAC  Signal System            kann 433 45 LO           Video Format  Video S N         56 dB  minimum   Composite Video Output        1 0 Vp p  75 Q       S Video Output    uw  Y   0 714 Vp p  75 Q  uC   0 286 Vp p  75 Q   Sannin linge mana
43. ng the disc information during  This operation only works on DVDs with playback  multiple subtitle languages    In disc mode  press DISPLAY repeatedly to    Press SUBTITLE to select the desired select the following display information   language   Changing sound track language  This operation only works on DVDs with       multiple audio languages       Press AUDIO to select the desired language        CHAPTER REMAIN  00305    OFF    For VCD       Press AUDIO to select the desired audio  channels for sound  This function is only    available for discs recorded with different Moving to another title  track    chapter       channels    When microphone plugged in  Some discs may contain more than one title or  LEFT VOCAL     RIGHT VOCAL     MONO chapter If the disc has a title or chapter menu  LEFT     MONO RIGHT     STEREO recorded on it  you can start playback from the       When unplugged microphone  selected item     MONO LEFT     MONO RIGHT     STEREO    Press GOTO on the remote control to display  the message of title and chapter  use  lt  lt  or    Note   gt  gt  to highlight an item       If your desired language is not set in the disc     Use numeric keys  0 9  to select a desired    you cannot select the language via this function  title chapter number     Searching for a particular passage    Press OK to start playback        Press  lt  lt  or B   on the system  or on the    Note   remote control  to select fast reverse search or     Selecting a title or chapter might 
44. not be possible  fast forward search respectively  on certain discs       Press  lt 4 or BR on the system  or on the  remote control  repeatedly to select the  required search speed     25    Disc Operations    o          o        26    Playing from a selected point    This function allows you to start playback at any  chosen time on the disc   For DVD    Press GOTO twice to activate time menu     Enter hours  minutes and seconds from left to  right in the time edit box using the numeric  keys  0 9       gt  Each time an item has been entered  the next  item will be highlighted     Press OK to start playback     For SVCD VCD or CD   Press GOTO to activate time menu     GOTO             will be displayed on the TV screen    Enter minutes and seconds from left to right in  he time edit box using the numeric keys  0   9      Press OK to start playback        Notes        In repeat disc or repeat all mode  you can  search a desired time point        This function only available in PBC OFF mode       This function is not available for MP3  WMA  disc     Using the System Menu    Some operations can be carried out directly via  he menu bar on the TV screen without  interupting disc playback    Press SYSTEM MENU      gt  The menu bar will be displayed across the  op of the TV screen     Press  4 or BP to select   SETUP MENU     SLOW     ZOOM      ANGLE     STEP     PBC    Press W to select the highlighted icon and press  A   7 to select your preferred option        Press OK to confir
45. ns       Plug and Play  for tuner installation   Plug and play allows you to store all available  radio stations automatically     If plug and play has not been installed     when you turn on the system     AUTO  INSTALL  PRESS PLAY    will be displayed        Press  gt II on the system to start installation      gt     INSTALL    will be displayed and followed by       TUNER    and then    AUTO SEARCHING         gt  PROG will start to flash      gt  The system will search all radio stations on  the FM band  and then the MW band      gt  All available radio stations with strong signal  strength will be stored automatically      gt  The system will stop searching when all  available radio stations are stored or when the  memory for 40 preset radio stations is full      gt  The first preset radio station will play when  Plug and Play is completed              Reinstalling plug and play   On Standby or demonstration mode  press and  hold   H on the system until    AUTO  INSTALL PRESS PLAY    is displayed       Press  gt il again to start installation     gt  All previously stored radio stations will be  replaced     To exit without storing the plug and play      Press M on the system     Notes         When the power is turned on  the disc tray may    open and close to initialise the system         If Plug and Play installation is not completed  it  will be reinitiated the next time you power on the    system         If auto install is not preset  the system will store    the rad
46. o station  Changing tuning grid         nesenenene 37          Tape Operation Recording     Tape  Playback a  un   General information on recording      Preparation for recording   Disc synchro recording             Clock Timer Operations  Viewing clock  Setting the timer       Viewing the timer  Setting the sleep timer                 Sound and Volume Controls  Sound control  MAX Sound  DBB  Dynamic Bass Boost   Selecting sound effect  Volume control sssusa 42  Changing the volume level  Switching off the volume temporarily       Listening through headphones       Other Functions   Switching on off  ssssssssssssssssssssssssssssssssssssssesssssssse 43  Switching the system on  Switching the system to standby mode  Power saving automatic standby   Dimming the display     Vocal        A   Key control                   Listening to external sources         General Information Maintenance       Max  title number plus album is 255    e The max  MP3 track number is 999    e Supported sampling frequencies for MP3 disc   32 kHz  44 1 kHz  48 kHz    e Supported Bit rates of MP3 disc are  32  64   96  128  192  256  kbps         Following formats can t be supported   e The files like  VMA    AAC    DLF   M3U     PLS   WAV   e Non English Album Title name      The discs recorded under Joliet format    Features   Your DVD Mini Hi Fi System with 2 channel full  digital amplifier creates the same dynamic sound  qualities that you find in full fledged cinemas and  incorporates some of the b
47. odak Picture disc playback   press KEY repeatedly to select different  slideshow view options  There are 12 options for  selection  The selected option will be displayed  on the TV screen      2         Kodak Picture disc    Load a Kodak Picture disc      gt  The disc reading time may exceed 30  seconds due to complexity of the directory file  configuration        Playback will start automatically   Press il       gt  9 thumbnail pictures will appear on the TV  screen      example for picture disc menu        Press kd or B  to view the previous next page   if available         Press  4    gt  gt    A   Y to move within the    Q    menu and press OK to select the desired  picture to play     Press KEY to start the slide show playback     During playback  you can   Press   or B to select another title picture in  he current folder     Press  lt  lt     gt  gt    A   V onthe remote  control to rotate or flip the picture files     Select    ZOOM ON    and press  4    gt  gt  on  he system  press and hold  4   BB on the  remote control  to zoom the picture in and out        Press PII to pause resume playback     Notes        Due to the recording nature of Digital Audio  MP3  DAM   only digital audio music will play        It is normal to experience an occasional    skip     while you are listening to your MP3 discs        For multi session discs with different formats   only the first session can be read and played        DISC MENU does not function during Kodak  Picture disc play
48. ode  all tracks in the current directory  will be played once in a random order     In stop mode  press SHUFFLE to play in a  shuffle order      gt  Playback will start from the first disc to the  last disc     Press SHUFFLE repeatedly to select the  following    SHUFFLE DISC   gt  REPEAT SHUFFLE DISC   gt   SHUFFLE ALL   gt  REPEAT SHUFFLE ALL   gt   SHUFFLE OFF    Press  gt H to start shuffle play     In shuffle playback mode     Press B  button to select another track in a  shuffle order     Press Ill to stop shuffle playback     To cancel Shuffle mode   In stop mode  press lll again to cancel SHUFFLE  function     Notes        In Tuner  Tape or AUX mode  this button does not  function        When the disc tray is opened  the Shuffle  function will be cancelled automatically        In the Shuffle playback mode  the system only  supports the same disc format        This function is only available for CD or VCD   PBC OFF      0  12      37    oO  12            4               Q  Q        Repeating a section within a chapter   track    You can play a specific section in a chapter track  repeatedly     Press REPEAT A B at your chosen start point     Press REPEAT A B again at your chosen end  point     gt  The passage will now repeat continuously        To resume normal play  press REPEAT A B  again     ATO B CANCELLED    will be shown on  the TV screen     Note       The REPEAT A B function can only be set within  the same chapter or track        Programing favorite tracks    
49. ontrol        Basic playback controls    To play discs in all the disc trays   Press HI      gt  All the available discs will play once  then stop     gt  During playback  the selected disc tray   elapsed playing time of the current track will  appear on the display     To start playback from a selected disc  tray    Press DISC 1  DISC 2 or DISC 3     To interrupt playback  Press  gt    To resume playback  press B Ill again     To stop playback  Press ll     Skipping to another title  track     chapter    Press kd or   on the front panel or on the  remote control repeatedly during playback to  skip backward or forward  Each press will take  the disc to the beginning of the previous or next  title  track    chapter   Note        If the player has been set to repeat chapter   track   pressing this button will replay the same  chapter  track  from its beginning     To go directly to any title  track     chapter   For CD VCD MP3   Use the numeric keys  0 9  to enter the  number of the desired track    For DVD   Please see    Moving to another title track    chapter        Press  4 or BP on the front panel  or on  the remote control  to fast reverse or forward  the disc     To resume normal play  press    H     Continuing playback from the last stop  point    In stop mode and before the disc is removed   press I to resume playback from where you  have stopped     Disc Operations    To cancel the resume mode    Press ll again  or go into STANDBY  POWER  OFF or press OPEN CLOSE key 
50. recorded tape and close the tape door       Load the tape with the open side down and the    full spool to the left  f    For recording  only use tape of IEC type       normal tape              The recording level is set automatically   regardless of the position of the Volume  Vocal   Key control and so forth          The type is secured at both ends with leader  tape  At the beginning and end of the tape   nothing will be recorded for seven seconds             To prevent accidental recording  break out the       Press TAPE  TAPE 1  2  or TAPE1 2 on the tab on the left shoulder of the tape side you  remote control repeatedly to select tape deck 1 Ba  or tape deck 2       gt  The selected tape deck number is displayed   il     Press  gt II to start playback     To stop playback    Press W                                Changing the playback mode     Press AUTO REPLAY repeatedly to select   PLAY or REPLAY  The default setting is PLAY                Press REC in Disc  Tape  Tuner or AUX mode      PLEASE CHECK TAPE 2    will scroll on the  display if there is no recordable tape in tape  deck 2     REPLAY         the tape will rewind  automatically at the end of  playback and replay  It will  replay up to max  10 times  or until you press I    PLAY  025 the selected side will be  played once     38          o        IMPORTANT      Recording is permissible if copyright  or other rights of third parties are not  infringed upon      Recording is possible only in tape deck  2        
51. ric keys  0 9  to enter your choice      Select Ei from the menu bar and press W to Note   play the disc step by step  one frame each step       This function is not available for CD or MP3   DIVXIWMA disc     To resume normal play  press PI   Note         This function is not available for CD or MP3   WMA disc     27    MP3  DIVX WMA  Picture Disc Operations     27          o        Q    28       Playing MP3 WMAJ  Picture disc   Kodak  JPEG     IMPORTANT      You have to turn on your TV set and  set to the correct Video In channel   See  Setting the TV set      MP3  WMAJJPEG Picture disc    Load an MP3 WMAY Picture  JPEG  disc      gt  The disc reading time may exceed 30  seconds due to complexity of the directory file  configuration     The album picture menu will appear on the TV  screen  If not  press DISC MENU on the  remote control      example for MP3 disc menu     SMART NAVI       In stop mode  Press  4    gt  gt    A   Von  remote control to select a desired album title   then press OK or PII to confirm  for MP3   WMA disc only     You can also use the numeric keys  0 9  to  enter your choice    To stop playback  press Il    Press  4 or  gt  gt  on the system to select  previous next album    If the MP3  WMA menu is switched off  You can only play the current title by pressing  PIL While in playback mode  press   or Bl  to select the previous next title      gt  The title number will appear    Note        No album search function in menu off mode     During JPEG or K
52. rom disc to disc  when it is  activated  playback will be prohibited if the  software s level is higher than the user set level     PCM  Pulse Code Modulation   A system  for converting analog sound signal to digital  signal for later processing without data  compression    Playback control  PBC   Refers to the signal  recorded on video CDs or SVCDs for  reproduction control  By using screen menus  recorded on aVideo CD or SVCD that supports  PBC  you can enjoy interactive type software as             title is composed o  chapter is assigned  you to locate the cl    f several chapters  Each  a chapter number enabling  hapter you want     Component Video Out Jacks  Jacks on the       back of the DVD System that sends high quality  video to a TV set that has Component Video In    jacks  R G B  Y Pb        Pr  etc       Disc menu  A screen display prepared for the    selection of images     sound  subtitles  multi angles     well as software having a search function     Progressive Scan  P Scan       It displays all the       horizontal lines of a picture a  signal frame  This system can    one time  as a  convert interlaced    video from DVD into progressive format for    connection to a progressive d  dramatically increases the ve  progressive scan TV set is nee  progressive scan output from    isplay  It   ical resolution  A  ded to receive  the system        etc recorded on a DVD     Digital  Sound that has been converted into  numerical values  Digital sound is available wh
53. rrupt disc playback    o resume playback from last stop point     STOP E   o stop playing the disc    REPEAT   o select variations of continuous playback   REPEAT A B   o repeat a specific section on a disc   SUBTITLE   o select desired subtitle    AUDIO    o select the audio channel       o switch to standby mode    Numeric Keypad  0 9    o enter a track title number of the disc        to enter a number of preset radio stations    VOL           adjust the volume level        adjust key control  ECHO level in karaoke mode     AD OK        to exit or confirm the selection     GOTO        to go direct to desired title  chapter or time     AD  PROGRAM      in Disc mode  to program favorite tracks       in Tuner mode  to program favorite stations     SHUFFLE      to playback in random mode                       8                ECHO    o adjust the echo level in karaoke mode     KEY        to change the tone level to suit your vocal  range        DISPLAY  OSD         to view the time  title or chapter information      2  MUTE      to interrupt or resume sound reproduction      3 DIM        to select different brightness for VFD     MAX        To activate or deactivate MAX sound     5  SOUND      to select various sound effect        CLOCK TIMER  o view and set clock  timer     DBB  Dynamic Bass Boost     Fo    DBB3 or DBB OFF      28  SLEEP  o set the sleep  auto off  timer function        o select the desired DBB level  DBB 1  DBB 2     Functional Overview    17    Basic Functio
54. system as shown  DIGITAL IN jack on a digital recording device     Connect the system s AUX IN jacks to the  DTS Digital Theater System compatible  with a  AUDIO OUT jacks on the VCR or Cable  Dolby Digital decoder  for example    Satellite box   Before starting operation  press AUX on the  remote control to select    AUX    in order to          activate the input source     Using the VCR for recording DVDs    Some DVDs are copy protected  You cannot  record or dub protected discs using aVCR        Connect the system s VIDEO jack to the VIDEO  IN jack on the VCR       Connect the system s LINE OUT  RIL  jacks  to the AUDIO IN jacks on the VCR  This will  allow you to make analog stereo  two channel   right and left  recording        To view DVD playback while recording  You must connect the system to your TV system  using the S VIDEO  as shown above  or the  Component  Pr Pb Y  video connection     14       Controls on the system       STANDBY ON  o switch the system on  to Standby mode      2  DISPLAY SCREEN       to view the current status of the system    3  SOURCE       to select the following    DISC  DISC 1  2  3        to select disc tray 1 2 or 3   TUNER  BAND        to select waveband  FM or MW    TAPE  TAPE 1 2        to select tape deck 1 or 2     AUX  o select a connected external source  TV CDR   AUX  auxiliary      MICVOL   o adjust the mixing level for karaoke or  microphone recording             MIC IN                 o connect microphone jack     SOUND   o se
55. the desired    SYSTEM MENU to exit and press  4    gt  gt     A   W buttons to move the zoomed picture  left  right  up or down     title or chapter  and then press BI or OK      gt  Playback start from the selected title or  chapter       To exit ZOOM mode  select    ZOOM OFF     Press DISC MENU on the remote control to    from the menu bar  go to disc menu of the disc     Viewing from another angle Note                                      If the playing DVD disc is recorded with multiple     If no title menu or root menu is recorded in the  camera angles   the ANGLE mark on the setup DVD disc  pressing this button will restart playback  page will be set to ON automatically  This allows from the first track   you to view the picture from different angles   Angle selection is determined by the disc format  Special VCD SVCD features  fe DP  amp  o a  N Playback control  PBC   Oo  u PBC playback allows you to play Video CD  eA af interactively  following the menu on the display   array w  gt  a 4 2  34 7  een 2    Select from the menu bar and press A   W  buttons to select the desired angle  1 4  2 4 3 4    Select from the menu bar and press W to  or 4 4  toggle between PBC ON and PBC OFF       gt  Playback changes to the selected angle   Playing a disc with PBC function    Advancing by frames    f PBC OFF the system will start playback    automatically     If PBC ON  the PBC menu  if available  will        ona AR Sas  gt    appear on the TV screen for selection  Use the  nume
56. tions        Setting the timer    The system can switch to DISC  TUNER or  TAPE mode automatically at a preset time   serving as an alarm to wake you up     IMPORTANT      Before setting the timer  ensure that  the clock is set correctly      The timer will always be switched on  once set      The timer will not start if a recording  is in progress      The time can be set in 24 hour mode        Press and hold CLOCK TIMER until    SELECT  CLOCK OR TIMER    is displayed      gt  Press kd or Bl to change the display to     TIMER         gt  Press CLOCK TIMER again to confirm     gt  TIMER      will start to flash       gt  The selected source will be displayed      27          o          Press DISC TUNER or TAPE  1 2  to select  timer mode  The corresponding source will  appear on the display     DISC   load the disc    TUNER   Tune to the desired radio station   TAPE 1   Load the prerecorded tape into tape  deck 1     Press I or B  on the system or remote control  to set hours      Press  4 or B   on the system or remote  control to set the minutes   Press CLOCK TIMER to store the setting      gt     TIMER DON    will be displayed for 5 seconds     gt  The timer will start to work          gt  The timer will always be switched on once it  has been set     Note       Setting timer using remote control is not possible  in AUX mode     At the preset time  the selected source  will play for 30 minutes before it switches  to standby mode  If no button is pressed  within the time fr
57. tup    lt   Sound Setup  Language Setup    Feature Setup    Press  4    gt  gt    A   Y onthe remote  control to navigate in the menu     Press OK to confirm your selection     gt  Playback will resume or begin automatically     Removing the menu  Press SYSTEM MENU or OK     Note       Some features of the Setup Menu are described  in    Preparations        DVD Menu Operations       Make sure the format you need is available on  the disc  If not  your setting will be invalid                 TV SYSTEM  P SCAN  SCR SAVER       SETTO PAN SCAN    4 3 PS  Pan and Scan mode    Select this if you have a conventional TV set and  your DVD is not formatted for wide screen  viewing  A wide picture will display on the whole  TV screen with a portion automatically cut off     4 3 LB  Letterbox mode   Select this if you have a conventional TV set and  your DVD is formatted for wide screen viewing   Black bars appear on the upper and lower  portions of the TV screen        16 9  Wide screen TV   Select this if you have a wide screen TV set  you  must also set your wide screen TV to    full size         16 9   Wide screen     4 3 LB   Letter Box        4 3 PS   Pan Scan        Note       Setting the TV shape is only available when the  disc is in the stop position     31    DVD Menu Operations    32    Using progressive scan to improve image    quality       This feature is only available when you have  connected this system  through the Component  Video jacks  to a Progressive Scan TV syste
58. us status     Press DISC  TUNER  TAPE  AUX    gt  The system will switch to the selected source        Switching the system to STANDBY  mode    In demonstration mode  Press and hold STOP MI on the system     In any other source mode   Press STANDBY ON  or    on the remote  control       gt  The time will appear on the display when the  system is in Standby mode     Power saving automatic standby    As a power saving feature  the system will  automatically switch to Standby mode if you  don t press any button within 30 minutes in the  stop mode        Dimming the display    Press DIM repeatedly to select different levels of  brightness for the display  HIGH  MID or LOW        Vocal    This function allows you to fade out the original  vocal from a karaoke  Press AUDIO key to  select different audio modes     For DVD karaoke discs   AUDIO 1 AUDIO 2 AUDIO 1VOCAL   AUDIO 2VOCAL     ForVCD karaoke discs   LEFTVOCAL  RIGHTVOCAL  MONO LEFT   MONO RIGHT or STEREO     Other Functions    43    Other Functions       Key control    This feature allows you to change the key tone  when you play a DVD orVCD disc      Press KEY     gt     KEY CONTROL ON    will be display on the  TV screen for 5 seconds     gt  The Key Control indicator will flash when you  press VOL     to change the key tone level     gt  If you don t adjust the key control level within  5 seconds  the indicator will turn off       Press KEY again to exit key control mode     gt     KEY CONTROL OFF    will be displayed on 
59. ways  keep disc trays closed to avoid dust buildup on  the lens    No objects filled with liquids  such as vases  shall  be placed on the apparatus    No naked flame sources  such as lighted candles   should be placed on the apparatus    Avoid condensation problem   The lens may cloud over when the player is  suddenly moved from cold to warm  surroundings  making it impossible to play a disc   Leave the player in the warm environment until  the moisture evaporates    Do not block the vents   Do not operate the system in an enclosed  cabinet and allow about 10 cm  4 inches  of free  space all around the player for adequate  ventilation        PHILIPS 10    DVD Mini Hi Fi System pasy         The ventilation should not be impeded by       covering the ventilation openings with items   such as newspapers table cloths  curtains  etc        Cleaning the cabinet  Use soft cloth slightly moistened with a mild    detergent solution  Do not use a D  solution containing alcohol  K  spirits  ammonia or abrasives       Cleaning discs N    To clean a CD  wipe it in a    straight line from the center   towards the edge using soft and   int free cloth A cleaning agent may damage the  disc    Write only on the printed side of a CDR W   and only with a soft felt tipped pen    Handle the disc by its edge  Do not touch the  surface    Cleaning the disc lens   After prolonged use  dirt or dust may accumulate  at the disc lens  To ensure good playback quality   clean the disc lens with Philips CD 
60. ystem does not respond when the  buttons are pressed     Vv    SALAS    Check if the AC power cord is properly  connected     Check if the disc is inserted upside down    Wait until the moisture condensed at the lens  has cleared    Replace or clean the disc  see    Maintenance      Use a readable disc or correctly recorded format  MP3 CD     Select the appropriate video input mode on the  TV set    Check if the TV set is switched on    Check the video connection    Check if the system is securely connected     Sometimes a slight picture distortion may appear   This is not a malfunction    Clean the disc    Connect the system to the S video input of your  TV set        The aspect ratio is fixed on the DVD disc   The aspect ratio may not be changed for some  TV systems           Insert a readable disc    Check the disc type  color system and region  code    Clean the disc    Place the disc with the playback side down   Press SYSTEM MENU to tum off the setup  menu    Cancel the parental control rating function or  change the rating level    Moisture has condensed inside the system   Remove the disc and leave the system turned on  for about an hour     Disconnect the power plug from the jack  and  insert again     Troubleshooting    Problem Solution    The language for the sound or subtitle    cannot be changed when playing a DVD     No image is output when a function is  selected     Sound cannot be heard or is of poor  quality    Poor radio reception     Recording or playback 
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Compresor de aire Compressor de ar  Bomba de óleo 10 l/min  Chamberlain MYQ-G0201 Instructions / Assembly  き貴重苦チ重森建吉も昇吾栄望富らなし離  施工要領書 - SWAIFE  Philips VR423CAT User's Manual  RIDGID R888 User's Manual  Bedienungsanleitung    Model S507 MGAU for Genie-2000    Copyright © All rights reserved. 
   Failed to retrieve file