Home

Philips DVDR9000H Hard Disk/DVD Recorder

1. keys to select a desired TV channel Press CH to scroll down up a page at a time Use dk keys to select a programme Press 144 ER to go directly to the previous day s or the next day s TV listings Q Press OK to start viewing The Search screen allows you to locate the programme listings by category It enables you to quickly and easily find something of interest to watch or record ua 1647 E Non programme Istings sorod by lo use Press view Bresso view TV EM uar Welcome Movies Sport Select Search and press V Use lt P keys to select a search category Movies Sport Children Others or My Choice Use A keys to select a sub category and press OK to start the search 2 All the programmes for the next seven days in this sub category are displayed by date and time gt Select All to receive results for all sub categories in this category Use lt gt A Y keys to select a programme and press OK to start viewing To set your own search keywords Select My Choice and press V Press the Yellow button on the remote control for EA Use lt gt A Y keys to enter your keyword and press OK to confirm Press the Green button for GE Highlight your keyword and press OK to start the search TIPS Press Blue button to return to the current time in the Grid screen Press GUIDE to
2. No HDMI audio output No HDMI video output EPG GUIDE Plus data is not available Solution You will not hear any sound from the HDMI output if the source device is only DVI HDCP compatible It is not possible to output SACD or copy controlled DVD Audio sources from the HDMI connection Make sure that you have activated this recorder as the HDMI input in the settings for the device you are using See HDMI setting HDMI connection can only be made to HDMI equipped devices with HDCP High Bandwidth Digital Content Protection If you wish to connect to a DVI connector equipped with HDCP you will need a separate adaptor DVI to HDMI Make sure the resolution of this recorder matches the device you have connected using the HDMI See HDMI setting Check if the HDMI cable is faulty If there is not signal received from the HDMI connection the Video Upscalling and HDMI output options in the system menu video output settings will be greyed out Replace a new HDMI cable When connecting to a non HDCP compliant TV the HDCP warning message will appear only on the analogue video output To use the EPG the analogue tuner has to be installed Installing only the digital tuner will result in no EPG service information Turn off the recorder to standby mode for at least 24 hours It will enable downloading of TV listings data Make sure that no timer recording is programmed during this timing as it will interrupt the EP
3. Press to select Disc Library then press NEXT P to select SORTING menu Use A Y keys to select one of the sorting options gt Alphabetical Lists all the titles by alphabetical order gt Numerical Lists all the discs by numerical order Press NEXT P repeatedly until the DISCS or TITLES and INFO menus appears ken TITLES My Holiday My Pictures O Celebrations OREMOVE DVD O OGET TITLE Q Highlight the title you want and press the Blue button on the remote control for GET TITLE gt A message showing the disc number appears Load the appropriate disc and start playback If the disc library becomes full you will have to delete some of the discs data in order to use the memory for new discs Select a disc number from the DISCS menu then press the Red button for REMOVE DVD TIPS Up to 999 discs can be stored in the disc library maximum titles per disc is 999 In total you can store up to 9000 titles Playback from Hard Disk Basic operation Each recording stored on the HDD is displayed in the HDD browser with an index picture Press HDD BROWSER on the remote control gt The content menu appears Press NEXT P repeatedly until the TITLES and INFO menus appear f A 13 01 00 M4 28 02 2005 O EFG 31 03 2005 40 22 00 FE ODELETE CHILD LOCK OPROTECT Symbols at th
4. Select Record only new DV updates minutes of blank tape the recording will end in the menu and press OK to confirm automatically gt The recordings which are later than the A chapter marker is inserted every time date and time set in the DV Specials when there is a break in the time code on see page 76 will be recorded onto the the DV tape This happens when the HDD or recordable DVD recording is stopped or paused then restarted To use the recorder s remote control to control the camcorder operation during recording press the Green button on the remote control for DV CONTROL 1 gt The DV control buttons display on the screen Ee LL CEET EN 5 3 TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD see page 38 47 Record to Hard Disk or recordable DVD continued Recording from camcorder When you connect the camcorder to the VIDEO or S VIDEO socket at the front panel of this recorder or the EXTI or EXT2 socket at the back panel follow the steps below to make the camcorder recording Before you start Mark the contents in the temporary HDD storage time shift buffer for which you wish to record to the HDD see page 36 Otherwise all the contents will be cleared when you start camcorder recording PHILIPS u Connect the camcorder to this recorder see pag
5. Selecting another title chapter track Searching forwards backwards Pausing playback slow motion play Repeat Scan Shuffle Using the Toolbar options 63 64 Edit Recordings Edit Recordings Hard Disk Changing the title name Selecting the genre Video editing Edit Recordings Recordable D About editing recordable DVDs Index Picture screen Deleting recordings titles Protecting the recorded titles DVD RW Changing the disc title Making the edited DVD RW compatible Finalising the DVD R for playback Video editing Others System Menu Options essssessnsssnnssnnnssnnunsnnnnsnnnnnnnnnnsnnnsnnnnnnnnnnssnnnssnnnnsnnnnsnsnnsnsnnnnnnn 75 86 Recorder Preferences Recorder Setup General Information Setting up Progressive Scan feature 87 Copyright 87 Frequently Asked Questions Software Upgrade uursssunsesnnsennnnsnnnnsnnnnsnnnnsnnnnsnnnnnsnnnsnnnnnnnnnnsnnnnnnnnnnnnnnnnsnnnsnnnnsssnnnsnsnne 90 Jn 91 95 Specifications cuuresonsessnnessnnsssnnsennnnsnnunsnnnnsnnnnsnnnnsnnnnnsnnnsnnnnnnnnnnsnnnnsnnnnnssnnnnssnnsssnnsssnnnsnsnne 96 Glossary Display panel symbols messages 4 eee eee eene eene netten sten atten assess etna tenus 98 99 Care and Safety Information CAUTION High voltage Do not open You run the risk of getting
6. end of the segment gt A visual marker is placed on the programme bar gt Playback skips to the start of the marked segment The segment is repeated until the repeat mode is cancelled cancel repeat playback press the Blue button once again TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs Additional Playback Features continued Using the Toolbar options gt AV PHILIPS se During playback press SYSTEM on the remote control gt The system setup menu appears At Toolbar press NEXT gt to select Options gt The available options might differ depending on the situation and disc type OSCAN OSHUFFLE GREPEAT Use A keys to select the setting you want to adjust gt Instructions and explanations of the options are provided in the following pages gt If the selection in the menu is greyed out that means the feature is not available or cannot be changed in the current state o To exit press SYSTEM Changing subtitle language This operation works only on DVDs with multiple subtitle languages You can change to the language you want while playing DVD This function can also be accessed via the Green button on the remote control while in disc playback mode Press to select Subtitle and press gt to enter its
7. CLOSING Disc tray is closing COMPATIBLE The recorder is busy making changes to make the disc DVD compatible COPY PROT The DVD video cassette you are trying to copy is copy protected CREATE MENU After the first recording has been successfully complete on a new disc the menu structure is created DISC ERR An error occurred when writing the title If this happens often clean the disc or use a new one DISC FULL Disc is full There is no storage space for new recordings DISC UPDATE Updating of disc is done after the editing is complete Entire disc is being erased DISC WARNING An error occurred when writing the title The recording will continue but the error will be skipped EMPTY DISC Inserted disc is new or has been completely erased no recordings present FREE TITLE An empty title was selected Display panel symbols messages continued FINALIZING DISC The DVD R disc is being finalised The progress bar on the LED shows the status of the finalisation process INFO DVD Information on the inserted DVD is displayed on the TV INSTALL After the automatic channel search the menu for setting the time date appears on the TV IS TV ON The recorder is currently in the first installation mode Turn on your TV and read the chapter Installation and Set up in the user manual MAX CHAP The maximum number of chapters per title disc has been reached The maximum num
8. and followed by the remote control to access the required Green button for NOW NEXT to information display the programme information The broadcaster decides the screen appearance content and navigation gt The display consists of an information methods of all digital text services box showing the description of the Press TEXT again to exit current programme and the name of the next programme of that channel Helpful Hints gt To view the programme information Not all TV channels transmit interactive on other channels press the CH television application at all times T C button on the remote control can be used as the SELECT button OSTARTREC ONOWNEXT BACK OMOREINFO TIPS Press INFO on the remote control to display or remove the Time Shift video bar 35 Before Recording 36 About temporary HDD storage Time Shift video bar The current TV programme will be stored in the temporary hard disk storage called TSB Time Shift Buffer once the recorder is turned on It will continuously store up to 6 six hours of TV programmes The Time Shift video bar will appear on the TV It indicates the status and timing of the TV programmes stored in the temporary HDD storage You can choose to display or remove the video bar by pressing the INFO 9 button on the remote control 1l 66 60 The Time Shift video bar consists of the following information D The
9. apparatens underside Observer Nettbryteren er sekundert innkoplet Den innebygde netdelen er derfor ikke frakoplet nettet s lenge apparatet er tilsluttet nettkontakten For a redusere faren for brann eller elektrisk stot skal apparatet ikke utsettes for regn eller fuktighet For Customer Use Read carefully the information located at the bottom or rear of your DVD Recorder and enter below the Serial No Retain this information for future reference Model No DVD RECORDER DVDR9000H Serial No Advarsel Usynlig laserstr ling ved bning n r sikkerhedsafbrydere er ude af funktion Undg utszttelse for str ling Bem rk Netafbryderen er sekund rt indkoblet og ofbryder ikke str mmen fra nettet Den indbyggede netdel er derfor tilsluttet til lysnettet s l nge netstikket sidder i stikkontakten S Klass I laseraparat Varning Om apparaten anv nds annat s tt an i denna bruksanvisning specificerats kan anv ndaren uts ttas f r osynlig laserstr lning som verskrider gr nsen f r laserklass 1 Observera St mbrytaren r sekund rt kopplad och bryter inte str mmen fr n n tet Den inbyggda n tdelen r d rf r ansluten till eln tet sa l nge stickproppen sitter i vagguttaget SF Luokan I laserlaite Varoitus Laitteen k ytt minen muulla kuin t ss k ytt ohjeessa mainitulla tavalla saattaa altistaa k ytt j n turvallisuusluokan ylitt v lle n kym tt m lle lasers
10. Connecting the digital input recording for 5 I channel recording Press SYSTEM on the remote control gt The system setup menu appears This recorder is equipped with a digital audio input socket that can support 5 1 Press V to select Preferences channel recording It allows you to Press NEXT P to select Recording capture the original sound from digital multi channel sources such as the Cable Press V to select 5 1 Recording and press NEXT gt Box Satellite Receiver when you record a video that produces the full cinema Use V A keys to select On and press sound experience Dolby Digital 2 0 5 1 OK to confirm DIGITALO er PS Es DOLEY Press SYSTEM to exit Ko Press CAM follow the instructions on Use a scart cable to connect the the screen to select the media type to EXT2 AUX I O socket on the recorder record and press OK to the Scart output socket or labelled as TV OUT or TO TV on the Cable Box Satellite Receiver Press CH repeatedly until EXT 2 appears on the top left corner gt This is the correct input source for Use a coaxial cable not supplied to 5 channel recording connect the COAXIAL IN on the recorder to the DIGITAL or COAXIAL output socket on the connected Cable Box Satellite Receiver Turn on the connected device and press RECORD to start recording gt 5 channel surround sound output Hints Ber BE 5 I channel
11. This device will only play Region 2 DVDs or DVDs St manufactured to be played in all regions ALL DVDs from other regions cannot be played on this recorder GE Product Information continued Special features Philips provides the best possible connection between your recorder and other home cinema equipment The recorder is controlled by external devices for example receivers and TVs via Cinema Link and is automatically set to the right system settings FOLLOW v With this function you can align the sequence of the channels on your TV analogue only with those on your recorder Make sure you have connected the TV to the EXTI TO TV I O socket of this recorder Automatic SATELLITE Recording This function enables you to record a programme from your Satellite Receiver or any other devices Make sure that the device is connected to the EXT2 AUX I O socket of this recorder and the timer setting has been done on the connected device Direct Record This function allows you to instantly record the programme analogue TV channels only you see on the TV without tuning this recorder to the same programme Time Shift Buffer As soon as you turn on this recorder the programme showing on the TV will be stored into the Time Shift Buffer It acts as a temporary HDD storage of your recordings The contents will be automatically deleted after 6 six hours or when you turn off
12. Video CD If the disc index menu appears use the alphanumeric keypad 0 9 to input your selection or use AW keys to select a play option and press OK to confirm To return to the previous menu press BACK on the remote control To stop playback press lil STOP Playing a DVD recordable disc Insert a DVD recordable disc gt The Index Picture screen appears 21 02 03 FU 00 32 02 SPP E 28 06 03 O Lord ofthe Rings The T Habla Con Ella The Ring Use AY keys to select a title to play then press PLAY To stop playback press lil STOP Helpful Hint If the message EMPTY DISC appears on the display panel this means that there are no recordings on this disc TIPS Some discs cannot be played on this DVD recorder due to the configuration and characteristics of the disc or due to the condition of recording and authoring software that was used 56 Playback from Disc continued MPEGI Audio Layer 3 files are highly compressed music files The MP3 format lets you store about ten times more data music pictures on a single CD ROM than a regular CD Insert an MP3 CD gt The content menu appears Otherwise press HDD BROWSER and select Disc Tray in the menu Press NEXT repeatedly until the ALBUMS and TRACKS menus appear 13 01 00 28 02 2005 ODELETE CHILD LOCK OPROTECT Use 4P A Y keys to select t
13. confirm e g 5 312 4 or 5 312 4 key in 53124 gt The GUIDE Plus system is decrypting the programming number and transforming it into a scheduled event ua Li Frequency Timing 0 c Recordings set 1 25 VPSIPDC set 0 25 see into Editor scup Record Schedule Freq Timing 21 May The Agents ONCE 0 Welcome f an incorrect programming number is entered you have to select the correct programme number manually Follow the instructions on the TV to edit the date and time The default recording settings are displayed in the pink tile To make changes press the matching colour coded button on the remote control Frequency Press the Red button on the remote control repeatedly to select the repeat recording setting Once Weekly M F Monday to Friday Timing Press the Green button on the remote control repeatedly to select adding extra time 0 10 20 30 to the end of recording or select VPS PDC V P function Note VPS PDC is not available for external receiver Press TIMER to confirm and exit the menu gt The TIMER icon will light up on the display panel if a timer recording is set gt If the recorder is not in standby mode a notification message will appear before the timer recording begins gt If you ignore the message the recorder will automatically switch to the respective channel and start recording TIPS Setting an appropria
14. ensure that the G LINK transmitter is properly connected and positioned see page 21 gt This will allow you to control the tuner of the Satellite Receiver Cable Box through the GUIDE Plus system Turn on the external receiver and use the receiver s remote control to select programme number 02 on the receiver Press OK to continue gt The GUIDE Plus system is sending signal via the G LINK connection to the external receiver to switch to a certain programme number If the external receiver has switched to the programme number displayed on the TV select Yes and press OK gt Otherwise select No and press OK to try a different code Repeat this process until the external receiver switches to another programme number Press the Green button to return to the setup screen If you want to specify the source and programme number of a GUIDE Plus host channel select Host Channel Setup in the menu and follow the instructions on the TV to complete the setup gt The default host channel setup is set to Automatic during the night to load the TV listing data If you use an External Receiver you have to tune your External Receiver manually to your host channel see below table for details Leave the External Receiver ON overnight Note If you tune to your Host Channel before going into standby your recorder will start immediately to download TV listings data This p
15. on the HDD or a recordable DVD TIPS Some discs cannot be played on this DVD recorder due to the configuration and characteristics of the disc or due to the condition of recording and authoring software that was used 57 Playback from Disc continued During playback the available playback settings are displayed at the bottom of the screen ENEE 200 SPEED DOWN OSPEED vl ZOOM Red button Select this to activate zoom mode The slideshow playback will pause ZOOM IN Blue button enlarge the picture ZOOM OUT Yellow button revert to the actual size END Red button exit zoom mode and continue slideshow playback REPEAT Green button Select this to toggle between repeat on and off SPEED DOWN SPEED UP Yellow and Blue buttons Select this to change the slideshow playback speed SLOW 10 ten seconds interval MEDIUM 5 five seconds interval FAST 3 three seconds interval To stop playback press W STOP Helpful Hints If both JPEG pictures and MP3s are in the same disc you can choose to playback the JPEG pictures or MP3s by selecting Photo or Audio in the menu For a non standard disc if the JPEG picture is not recorded with an exif type file the actual thumbnail picture will not be shown on the display It will be replaced with a blue mountain thumbnail picture Some types o
16. source Tuner Digital Terrestrial Tuner DTT External Receiver Select Editor and press V gt The display of the Editor screen depends on the specific TV reception environment of your area To turn On Off the channel Move to the left tile of the channel that you want to change then press Red button on the remote control gt The On channels programme listings will be displayed in Grid screen To change the Source Move to the right tile of the channel that you want to change then press Red button to change the source e g Tuner DTT Ext Rec I etc gt The programme number changes automatically to reflect the new source To change the Programme Number Move to the right tile of the channel that you want to change then press the Green button and use the alphanumeric keypad 0 9 to enter the programme number The Setup screen is the central location for you to configure the GUIDE Plus system according to your personal situation Region TV reception In addition you have the option to set up your Host Channel and to view the GUIDE Plus system information screen Mey 1647 Setup allows you to define your language c postal code external receiver and Host Channel Press Y to use Press 4 to view Editor cmos Basic Setup Host Channel Setup GUIDE Plus System Information For a detailed description of the GUIDE Pl
17. to HD High Definition The High Definition output can only fed through the YPbPr and HDMI connections This recorder allows you to increase the picture resolution up to 720p and 10801 Before adjusting the setting make sure that your television is able to support the video resolution or standard What is Pixel Plus Philips Pixel Plus technology is an adaptive method of improving the picture quality of output signals from any source such as TV reception satellite receiver inputs DVD recordings and DVD playback at any quality level The picture quality of processed video signals is analysed and dependent on the degree of disturbances Philips proprietary noise reduction time base correction and sharpness improvement is applied automatically on the output signal This results in superior quality video output from the HDMI output on any HDMI TV and Philips Pixel Plus TVs What is DVB Digital Video Broadcasting DVB is a standard for digital television maintained by the DVB Project This recorder has an integrated digital TV tuner DVB T that enables reception of free digital video and radio broadcasts via a terrestrial antenna It offers the best possible digital audio and video quality More stations can be transmitted in the same frequency band and additional media services such as city guides web content are possible The number of these free to air stations might vary from country to country What is 5 1 chann
18. CONTACT OUR CUSTOMER SERVICE CENTER 0 os DIGITAL Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Digital Video Broadcasting Trade mark of the DVB Digital Video Broadcasting Project 1991 to 1996 Homi HDMI and HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC ma rovision This product incorporates copyright protection technology that is protected by US patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited U S Patent Numbers 4 63 1 603 4 819 098 4 907 093 5 315 448 and 6 516 132 GEMSTAR A E SHOWVIEW VIDEQ GUIDE Plus SHowView VIDEO Plus G LINK are 1 registered trademarks or trademarks of 2 manufactured under license from and 3 subject to various international patents and patents applications owned by or licensed to Gemstar TV Guide International Inc and or its related affiliates GEMSTAR TV GUIDE INTERNATIONAL INC AND OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF THE PROGRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS SYSTEM IN NO EVENT S
19. Country menu appears on the TV use AW keys to select the desired menu language and press to confirm Select language and country gt County GB United Kingdom Done ei Disc tray will not open until setup is completed Select the country of your residence i Highlight Country and press NEXT P then use keys to select and press to confirm If your country is not available in the list select Others ii Highlight Done and press OK on the remote control The TV shape menu appears on the TV Select the appropriate TV shape according to the TV you have connected Select TV shape in the way you want full screen movies to be displayed on your TV Disc tray will not open until setup is completed i Highlight TV shape and press NEXT E use A V keys to select and press to confirm 16 9 4 3 Letterbox 4 3 PanScan ii Highlight Done and press OK on the remote control TIPS After completing the basic installation you can change or update your settings using the system setup menu see page 78 86 26 Step 3 Installation and Set up continued The Channel Search menu appears on the The time and date menu appears TV Select Search channels in the menu and press OK on the remote Please check the Time hh mm and Date and correct control to start analogue channel search if necessary Time 20 01 gt It takes a
20. Format je nach Hersteller verschieden ist ist f r Ihr DVD System m glicherweise die Erweiterung der Spielbarkeit oder eine Aktualisierung erforderlich Da die DVD Technologie sich st ndig weiterentwickelt werden sich diese Erweiterungen durchsetzen und einfach auszuf hren sein Gehen Sie zu f r Ihre Software Aktualisierung zu Wwww philips com support Doordat fabrikanten verschillende schijfindelingen aanbieden moet uw dvd systeem mogelijk worden ge pgradet of uitgebreid Naarmate de dvd technologie zich verder ontwikkelt zullen deze uitbreidingen normaal worden en zult u ze gemakkelijk kunnen uitvoeren Ga naar www philips com support om uw software te upgraden A causa della differenza di formato tra i dischi forniti dai vari produttori il sistema DVD potrebbe richiedere un potenziamento o aggiornamento della riproducibilit Col progredire della tecnologia DVD questi potenziamenti diverranno comuni e facili da implementare Visitare www philips com support per scaricare gli aggiornamenti del software English Deutsch 100 This product complies with the radio interference requirements of the European Community This product complies with C the requirements of the following directives and guidelines 73 23 EEC 89 336 EEC 93 68 EEC Deutsch Table of Contents General Care and Safety Information ssussssnsesnnsennnssnnnsnnnnsnsnnnnnnn
21. PDC is turned on but VPS PDC time is wrong Enter the exact VPS PDC time 1 Enter the ShowView VIDEO Plus PlusCode programming number of the desired TV channel 2 Press OK to confirm 3 Check the channel number in the Ch input field If this does not correspond to the desired TV channel select this entry field and change the channel number 4 Press OK to confirm You can finalise the disc using the following function 1 Press OPEN CLOSE on this recorder to open the disc tray 2 Insert the disc but do not close the tray 3 Hold down button number 4 on the remote control until the tray closes FINALIZING DISC appears on the display panel 4 If finalising has been successful the Picture Index screen will appear This happens if you try to copy DVDs or video tapes that have been copy protected Even though the picture on the TV is fine the recording on the recordable DVD is faulty This interference is unavoidable with copy protected DVDs or video tapes The recordable DVD has a limited recording lifetime use a new disc for recording You have to re format the DVD RW RW 1 Press OPEN CLOSE on this recorder to open the disc tray 2 Insert the disc but do not close the tray 3 Hold down button number 0 on the remote control until the disc tray closes 4 Start recording on the DVD RW RW before you remove it from the disc tray 94 Troubleshooting continued Problem HDMI EPG
22. Recording About temporary HDD storage Time Shift video bar Default recording settings Record to Hard Disk Recording TV programmes Simultaneous record and play function Direct recording from TV Automatic recording from Satellite Receiver About timer Timer recording GUIDE Plus system Timer recording ShowView VIDEO Plus system Timer recording Changing Deleting a timer recording Table of Contents Record to Hard Disk or recordable DVD Recording from a DV Camcorder Recording from camcorder sss Recording from an external device VCR DVD player Copy from Hard Disk to recordable DVD About copying Discs for recording Copying to a recordable DVD Disc Library Using the Disc Library tnn asse SSR nass sensa asses sauer Storing the recorded DVD data in the Disc Library SI Finding a recorded title 2 92 Playback Playback from Hard Disk u 53 54 Basic operation Viewing the hard disk information Sorting the titles display order Delete Protect a title in the HDD Playback from Disc Playable discs Starting disc playback Additional Playback Features Creating a slideshow playlist album
23. Select this to return to the previous screen SPLIT Select this to insert a new chapter marker at the current point of playback This will allow you to access a specific point in the recording easily or set a chapter you wish to hide HIDE SHOW Select this to hide or show the current chapter During playback the hidden chapter will be skipped TIPS No further recording and editing can be carried out on a finalised DVDER Press BACK to go back to previous menu item Press EDIT to exit the menu 73 Edit Recordings Recordable DVD continued TITLE Yellow button Select this to access title editing menu ODIVIDE 9 BACK INDEX PIC DIVIDE for DVD RW only Select this to create a new title from the current point of playback The existing title will be divided into two titles Warning Once a title has been divided it cannot be reversed BACK Select this to return to the previous screen INDEX PIC Select this to use the current scene as the index picture Note In the Index Picture screen normally the first frame of a recording is shown as the title s index picture HIDE SHOW Blue button Select this to hide or show the current chapter Helpful Hints All the hidden chapters will be played back while in video editing mode The selection of scenes to hide or show can only be done within a title There is a l
24. TV has the Cinema Link feature or a similar feature ensure that the scart cable is connected to the scart socket that supports CINEMALINK on your TV All the available TV channels analogue only will automatically be downloaded to this recorder Helpful Hints If your TV displays a selection for the SCART socket select VCR as the source for the SCART socket The EXT2 AUX I O socket is intended only for additional devices Option 2 Using the S Video socket Use an S video cable not supplied to connect the S VIDEO Y C socket on the recorder to the S Video input socket or labelled as Y C or S VHS on the TV gt Audio connection is required in order to hear the sound see page 20 Option 3 Using the Video CVBS socket Use a composite video cable yellow not supplied to connect the VIDEO CVBS socket on the recorder to the video input socket or labelled as A V In Video In Composite or Baseband on the TV gt Audio connection is required in order to hear the sound see page 20 TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet Step I Basic Recorder Connections continued HDMI OUT VIDEO IN S VIDEO IN voeon 7 Option 4 Connecting to a Option 5 Connecting to a HDMI Progressive Scan TV compatible TV The progressive scan video quality is only HDMI Hig
25. TV programme start time Once it has exceeded 6 six hours the beginning of the contents will be deleted and the start time will be changed accordingly Remaining space in the temporary storage Clips that selected to be recorded onto the HDD marked Red 4 Current position and time of the TV programme broadcast 5 Title markers when you switch to a TV channel for more than minute a new title marker will be created Present time Programme information Warning The temporary HDD can only store up to 6 hours of TV programmes All the contents will be cleared when you press STANDBY ON to turn off the recorder In addition executing the following actions will also clear the contents in the temporary HDD storage Press CAM on the remote control Enter to Setup or Record mode option in the system setup menu This action will clear the Time Shift Buffer Do you want to continue O No i To proceed and clear the contents in the temporary HDD storage press OK on the remote control to select Yes in the menu OR ii Select No in the menu and press OK on the remote control to abort Marking the contents for recording You need to mark the contents in the temporary HDD storage before it can be recorded to the hard disk drive HDD see page 39 To select a title programme Press INFO G to show the overview panel and use keys to select a title
26. To delete the timer programme Changing Deleting a timer Press the Red button on the remote recording control for 2598 To edit the timer programme Turn on the TV to the correct Press the Green button on the remote programme number for the recorder control for METE and follow the e g EXT 0 AV instructions on the TV to make the Turn on the recorder and press TIMER necessary changes entry on the remote control R a gt The GUIDE Plus schedule screen To edit the Frequency Timing Highlight the respective tile in the menu and press the Red button to change the frequency or the Green button to change appears ES ege anal Schedule displays programmes you ve Set to Record HP Pres Y 1o use Press he green buon or manua the timing recording Press 4 to view My TV Press to view info Schedule Bann ae ma o Once complete press TIMER to 21 May 18 42 02 25 Po1_ ONCE 0 en confirm and exit the menu Welcome 21 May 20 00 21 00 P 12 ONCE 0 Whatto do first Press V to select a timer programme which you want to delete edit nuy a Deiste NES oem Pon 1842 463 min Grd Search Schedule Record Schedule Freq Timing SNCH 1 ONCE 0 o Welcome 21 May 20 00 21 00 EIS 0 TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time t
27. a receiver with two channel digital stereo PCM OR Use an optical fibre optic cable not supplied to connect the OPTICAL OUT socket to the optical input socket of the connected device gt Make sure that both plugs are fully inserted until a click is heard For option 2 connection you have to set the appropriate Digital Audio Output setting see page 85 Otherwise no sound or interference may occur 20 Step 2 Optional Connections back panel Cable Box Satellite Receiver front panel Connecting to a Cable Box or Satellite Receiver Option If your Cable Box Satellite Receiver has only an antenna output socket RF OUT or TO TV refer to Connecting the antenna cables on page l6 for the complete connection to your TV Option 2 as shown on the above illustration If your Cable Box Satellite Receiver has a Scart output socket 9 Keep the existing antenna connection from the Cable Box Satellite Receiver to your TV Use the scart cable to connect the EXTI TO TV I O socket on the recorder to the corresponding SCART input socket on the TV Place this in front of the Cable Box Satellite Receiver see Use another scart cable to connect the EXT2 AUX I O socket on the recorder to the Scart output socket or labelled as TV OUT or TO TV on the Cable Box Satel
28. an electric shock The machine does not contain any user serviceable parts Please leave all maintenance work to qualified personnel Setup precautions Finding a suitable location Place the set on a flat hard and stable surface Do not place the set on a carpet Do not position the set on top of other equipment that might heat it up e g receiver or amplifier Do not put anything under the set e g CDs magazines Install this unit near the AC outlet and where the AC power plug can be reached easily Space for ventilation Place the apparatus in a location with adequate ventilation to prevent internal heat build up Allow at least 10 cm 4 clearance from the rear and the top of the set and 5cm 2 from the left and right to prevent overheating 5cm 2 3 Avoid high temperatures moisture water and dust Apparatus must not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles Cleaning discs Some problems occur frozen picture sound disruptions picture distortions because the disc inside the unit is dirty To avoid these problems discs should be cleaned on a regular basis To clean a disc use a micro fibre cleaning cloth and wipe the disc from the center to the edge in a straight line CAUTION Do not use solvents such as benzene thinner commercially availa
29. be displayed at the top Action Bar O whenever applicable You can access the function by pressing the matching colour coded button on the remote control Schedule recordings Select a programme you wish to record and press the Red button on the remote control for gt You can store up to 25 TV programmes for recording Select a specific channel programme Press the Yellow button on the remote control for to view the logos of all the available channels in your area press OK to select Helpful Hint The shows you have scheduled for recording can be reviewed and edited in the Schedule screen see page 32 TIPS Press Blue button to return to the current time in the Grid screen Using the GUIDE Plus system continued GUIDE Plus menu bar The GUIDE Plus system consists of seven areas in the menu bar Press GUIDE on the remote control gt The GUIDE Plus screen appears Press to highlight the menu bar then press to select a menu bar option and press V to access gt The information on the individual menu bar is described in the following pages The Grid screen is the main TV listings screen of the GUIDE Plus system It provides you with seven days of TV listings information SEED pu listings by channel and Press the yellow button to see hu mosaic ofall channels Press Search ve DO 20 E Use
30. digital tuner information lt P Cursor buttons for moving to the left right or jump backward or forward by a specified length of time in tuner mode AY Cursor buttons for moving up down or select previous next title in the temporary HDD storage during playback OK Confirms an entry or selection SYSTEM Enters Exits the system setup menu 8 CH While in tuner or camcorder mode selects the next or previous TV channel or the external input source EXTI EXT2 Skips to the next page up or down in the GUIDE Plus system 9 HDD BROWSER Enters Exits the content browser menu TIMER Enters exits the timer recording menu REC Starts recording the current TV programme or the current video input source Marks the title in the time shift buffer for recording onto the HDD 2 TEXT Enters exits the MHEG service interactive teletext for UK only 3 EDIT Enters exits the editing menu TUNER Toggles between analogue TV tuner digital TV tuner and digital radio tuner 5 Colour coded buttons These buttons are used to select the coloured options available in some menu displays on the TV screen GUIDE Enters Exits the GUIDE Plus system D pixel plus Turns on off the pixel plus picture enhancement feature TV VOL t Adjusts the volume of the TV for Philips TV with RC5 code only Alphanumeric keypad Ent
31. discs HDD Recordable DVD HDD Hours of recordings can Time required recording be stored empty for copying 1 hour mode 47GB recordable DVD recording 25 mins 12 5 mins 10 mins 8 mins 6 mins 4 mins 3 mins The following information will be stored on the disc Recording mode Title name of recording Date and time of recording Index picture of title Discs for recording Three different types of DVD recordable discs can be used with this recorder AP DVD ReWritable RN DVD RW DVD Rewritable Discs that are re writable can be used for multiple recordings once existing data is erased AP DVD R R DVDER DVD Recordable Discs can only be used for a single recording Each new recording is always added at the end of all previous recordings as existing recordings cannot be overwritten Editing can be done on DVD R discs as long as they have not been finalised You can also delete unwanted recordings However the disc space occupied by the deleted recordings cannot be recovered for further recording To play a DVD R disc on other DVD players it must be finalised see page 72 After this is done no more data can be added to the disc Em DVD R DL DVD R Double Layer It contains the same usage as DVD R the only difference is the capacity 8 5 GB It offers two recordable layers on a single D
32. exit the menu 3l Using the GUIDE Plus system continued My TV screen The My TV screen allows you to set up a personal profile You can define the profile by channels categories and or by keywords It enables you to quickly and easily find something of interest to watch or record ue jene Home My TV recommends programmes acording to your profile settings Press W to use Press the yellow button to change your profie settings Press 410 ZI view Search Press to view Schedule erd Searc FS Profile Settings Be IUUD Channels pE Categories Keywords Paul Newman Select TV and press y P Press the Yellow button on the remote control for xs Use A keys to select Channel Categories or Keywords Press the Yellow button for DR Channel Select a channel from the Channel screen and press OK gt Repeat this step to add more channels up to 16 Categories Select a category from the Search screen and press OK gt Repeat this step to add more categories up to 4 Keywords 9 Use gt A keys to enter your keywords and press OK to confirm gt Repeat this step to add more keywords up to 16 Q Press OK to activate your profile Schedule screen The Schedule screen allows you to examine delete and edit the scheduled record
33. gt The GUIDE Plus basic setup menu appears Otherwise press GUIDE on the remote control then press A and press NEXT P repeatedly until you select the Setup menu bar u UT Setup allows you to define nn postal code external receiver and Host Channel Press v to use Press to view Editor Scene me r welcomel Basic Setup Host Channel Setup GUIDE Plus System Information do first Press V to select Basic Setup in the menu and press OK to access the setup screen Back Press A or Y to select Then press OK to confirm Press the red button to go back to the main Sep t screen SS Basic Setup Language Country United Kingdom Postal Code None MEET External Receiver 1 None External Receiver 2 None External Receiver 3 None What to do first DET Language Country These settings will be taken from the basic installation set up Postal code Press OK to access the entry menu Use AY keys to enter the local postal code and use lt P keys to move to previous or next entry field Note The postal code you enter must be correct and must represent a postal code in the identified country If not you will receive no or incorrect TV listings data External Receiver 1 2 3 Note If you do not have an external receiver connected leave the fields as None and press the Red button on the remote control to exit the m
34. in the disc where you want the recording to be placed e g the space of a deleted title For DVD RW you can erase all the disc contents in order to create space for new recording Press the Red button for ERASE DISC j If copy an edited title marked with 4 in the HDD all the attributes of the recording hidden or unhidden chapter markers will be transferred Only unhidden chapters will be playback To start recording press the Green button again for START gt HDD TO DVD appears on the display panel during copying process gt While copying the recordings from HDD any interruption to the process e g power failure may lead to a bad disc Otherwise press the Yellow button for CANCEL to abort the operation gt Press INFO will call out the coloured options at the bottom of the screen Helpful Hints n some cases you may not be able to add new recording to a recordable DVD that contains recordings from other DVD recorders If the newly recorded title in the HDD is not accessible turn the recorder off and on again to recover the recording If you are unable to fit a title in the HDD to a recordable DVD split the unwanted sections into multiple titles Refer to the section Video Editing in the user manual for further assistance To edit your recordings on the recordable DVD see pages 70 74 TIPS Ensure that there is sufficient space available on the recordabl
35. mins SP standard play 3 hrs 40 mins SPP standard play plus 4 hrs 35 mins LP long play 5 hrs 30 mins EP extended play 7 hrs 20 mins SLP super long play 11 hrs 5 mins SEP super extended play 14 hrs 45 mins Frequently Asked Questions continued Some recordings listed on the HDD menu cannot be played or copied to disc Some TV broadcasts or videos from external device that are recorded to this recorder may contain copy protection signals Such material cannot be played back from the HDD or copied to a recordable DVD The copy protected recordings are marked with the icon in the HDD menu They are either fully protected copy never or partially protected copy once For partially protected recording playback is possible but once copied to a recordable DVD the recording will be removed from the HDD What is HDMI High Definition Multimedia Interface HDMI is a high speed digital interface that can transmit uncompressed high definition video and digital multichannel audio It delivers perfect picture and sound quality completely free from noise HDMI is fully backward compatible with DVI As required by the HDMI standard connecting to HDMI or DVI products without HDCP High bandwidth Digital Content Protection will result in no Video or Audio output What is video upscalling With Video Upscalling you can increase the resolution of the DVD video signals from SD Standard Definition
36. option 2 Otherwise follow option I These connections enable you to watch and record TV programmes using this recorder If the antenna signal is connected via a Cable Box or Satellite Receiver ensure that these devices are turned on in order to watch or record analogue antenna the cable programmes Connect the existing Antenna Satellite If you want to connect to a VCR Receiver Cable TV signal labelled as RF and or a separate Cable Box OUT or TO TV to the ANTENNA amp Satellite Receiver see page 21 23 for socket on the recorder other possible connections Use the supplied Tuner interlink cable to connect the two A sockets on the Helpful Hint recordar Depending on how you have currently connected your TV channel directly from amp Use the supplied RF coaxial cable to off air antenna or cable box or VCR you ll connect the TV socket on the have to disconnect some of the cables before recorder to the antenna input socket or you make the antenna connection labelled as VHF UHF RF IN on your TV TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet l6 Step I Basic Recorder Connections continued m cable satellite antenn 25 ES 0020 w SY Y ant component Bar VIDEO IN a IN AUDIO IN SCARTIN eo ot O
37. radio stations information via their text service This As new services are added over time digital service includes high quality digital make sure to regularly update and install text and graphics along with advanced new channels see page 83 navigation options Press TUNER repeatedly to switch to a MHEG can only be activated if no digital TV or radio channel subtitles are shown on the screen Press CH to select a desired TV i Before you start radio channel of the selected tuner y Turn off the subtitle using the toolbar While watching digital TV radio broadcast option see page 63 This can also be you can have the following options done by holding down the TEXT button on the remote control until the subtitle toolbar option appears Press V to select Off the menu and press 4 to confirm Changing the subtitle audio language This operation works only for broadcasts with multiple subtitle audio languages Press TUNER repeatedly until The subtitle audio language can be appears on the top of the screen changed using the toolbar see page 63 Note You can also hold down the TEXT Press TEXT or the Red button on the button on the remote control for quick remote control access to the subtitle option Once the text information is displayed Hain you can use A V keys the colour 5 Kate programme coded buttons and or the intormation alphanumeric keypad 0 9 on the Press INFO
38. recordable DVD see page 38 42 Record to Hard Disk continued Timer recording ShowView VIDEO Plus system This is a simple timer programming system To use it enter the ShowView programming number VIDEO Plus PlusCode programming number associated with your television programme You can find this number in your TV listings magazine All the information needed by this recorder for programming is contained in the programming number Turn on the TV to the correct programme number for the recorder e g EXT 0 AV Turn on the recorder and press TIMER on the remote control gt The GUIDE Plus schedule screen appears Pen mm wn Schedule displays programmes you ve Set to Record Press Y to use Press the green button for manual recording Press 4 to ven TV Press gt to view E Info Pcs sear SE Welcome Press the Red button on the remote control for or BESSE gt The ShowView VIDEO Plus entry screen appears IL Please enter the ShowView programming number and press OK to confirm Schedule REENEN Record Schedule Freg Timing ONCE 0 Welcome Note In the UK and Ireland the ShowView system is called VIDEO Plus system and ShowView Programming Number is called PlusCode Programming Number Use the alphanumeric keypad 0 9 to enter the ShowView VIDEO Plus programming number and press OK to
39. recordable DVD see page 38 48 Record to Hard Disk or recordable DVD continued To continue select to record to Hard Recording from an external Disk or Recordable DVD in the device VCR DVD player menu and press OK to confirm gt All the contents the temporary You can record from an external device HDD storage will be cleared except for which is connected to this recorder s the marked recordings input socket Copy protected Otherwise select Cancel the menu material cannot be recorded on this and press OK to abort the operation recorder Press CH repeatedly to select the IMPORTANT correct input channel that matches the It is not possible to record the disc connected socket of the device playback from this recorder to its gt S VIDEO or VIDEO HDD socket at the front gt EXT 1 EXTI TO TV VO scart socket at the back gt EXT 2 EXT2 AUX I O scart socket at the back Q Start playback on the connected device Press RECORD to start recording To pause the recording press PAUSE To continue recording press PAUSE again gt You can use this function to avoid ao CAM 58688 unwanted recording PHILIPS S gt A new chapter marker is created after recording restarts Connect the external device to this STOR recorder see page 22 To exi
40. system that send audio to another system TV Stereo etc Chapter Sections of a picture or a music piece on a DVD that are smaller than titles A title is composed of several chapters Each chapter is assigned a chapter number enabling you to locate the chapter you want Digital Sound that has been converted into numerical values Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL sockets These sockets send audio through multiple channels instead of just two channels as analogue does Disc menu A screen display prepared for allowing selection of images sounds subtitles multi angles etc recorded on a DVD Dolby Digital A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio front left and right surround left and right centre and subwoofer Finalise A process that makes playback of a recorded DVD R or CD R possible on device that can play such media You can finalise DVD R on this unit After finalising the disc becomes play only and you can no longer record or edit on the disc Index Picture Screen A screen that gives an overview of a DVDXRW or DVD R An Index Picture represents each recording HDD Hard disk drive This is a mass data storage device used in computers etc Disks are flat circular rigid plates coated with a thin magnetic media Magnetic heads record data on the rapidly spinning disks This facilitates the re
41. the TV once you insert a VCD SVCD Note This option is not visible unless a VCD SVCD is in the disc tray This is only an information screen that shows the current version of software installed in your recorder You may require this information for future online software upgrades System Menu Options continued Time Date settings underlined options are the factory default settings Clock preset 80 The time date can be set automatically on this recorder ifthe stored TV channel transmits a time signal Auto The recorder will automatically detect the first available channel which is transmitting the time date information PXX Select the TV channel to use for transmitting preset number the time date information Off Select this before setting the time date manually If the time date is incorrect you must manually set the time date here 00 00 Use keys to set the hours and minutes press NEXT P to move to the next digit field Once complete press OK 31 01 2006 Use A V keys to set the day month and year press NEXT to move to the next digit field Once complete press OK Auto search Follow TV Favourites oOgo00g0o0 System Menu Options continued Although this recorder selects all the available analogue TV channels during basic installation you may want to repeat the process later if more channels become available in your area or if you are reins
42. this recorder To store the contents on the hard disk permanently you have to mark the section in the Time Shift Buffer for recording to prevent them from being deleted Instant Replay You can repeat a scene of a live TV programme by pressing REPLAY button on the remote control as often as you like If you wish to return to the live TV programme just press TUNER FlexTime You can watch or recall a TV programme while it is still being recorded You do not have to wait until the end of the recording before starting playback You can also watch a different programme from the hard disk while it is recording something else Pause Live TV A live TV programme is now under your control You can pause the programme by pressing PAUSE button and resume playback at the scene it was interrupted by pressing PLAY button If you want to return to the live TV programme just press TUNER Pixel Plus Pixel Plus improves the detail depth and clarity level of video recordings from any source via the digital HDMI connector The noise reduction and sharpness improvement are applied automatically on the output on any HDMI TV and Philips Pixel Plus TVs P i LINK is also known as FireWire and IEEE 1394 This connection is used for the transfer of high bandwidth digital signals as used by digital video DV devices It carries all audio and video signals via a single cable SuowVrw VIDEO This is a simple programm
43. will blink twice DFR9000 can be controlled with this gt If more than one code number is remote control e g PLAY TUNER listed try entering them one at a time SYSTEM Turn on the TV and try to perform the Additionally the following functions are following operations using the recorder s enabled in the SACD and AMP modes to remote control allow maximum control of your Cineos f your TV does not react to the buttons 9000 series equipment pressed repeat steps to 3 with another code number listed for your TV s brand Product DVP9000S or DFR9000 until you have found the correct code Philips SACD DVD players that works with your TV DVDR9000H SACD mode AMP mode Buttons Operations Remote control 5 Turns your TV on or off T C DISC MENU Select main source SACD DVD SAT TV VOL t Adjusts the volume of your TV GAME TV DVD RW HDTV CH Selects the TV programme HDD SOUND SURROUND Digit keys 0 9 on your TV BROWSER MODE MODE Step 1 Basic Recorder Connections Do cable satellite antenn Dot Pur Y componenti VIDEO IN Bar S VIDEO IN AUDIO IN SCARTIN VIDEO IN D aS Before you start Connecting the antenna This recorder is equipped with two cables tuners one for digital TV reception and one for analogue TV reception If you have a separate digital terrestrial aerial follow
44. ADDENDUM PHILIPS DVDR9000H Accessories supplied page 9 For HDD DVD Recorder sold in Asia Pacific and Middle East the following accessories will not be supplied e Scart cable e G LINK transmitter Region Codes page 9 This device will only play Region 3 DVDs or DVDs manufactured to be played in all regions ALL DVDs from other regions cannot be played on this recorder Connectivity page 21 G LINK control allows control between the HDD DVD Recorder and Cable Box Satellite Receiver This setup is not applicable for Asia Pacific and Middle Eastern countries Cable Box Satellite Receiver Electronic Program Guide page 28 33 The GUIDE Plus system is activated with the GUIDE button on the remote control It lists TV channels information transmitted Austria Belgium France Germany Italy GEMSTAR Netherlands Spain Switzerland and United Kingdom This feature is not available for TV channels in Asia Pacific and Middle Eastern countries Timer Recording page 42 43 This HDD DVD Recorder allows timer recording using SHowViEw In Asia Pacific and Middle Eastern countries this system is equivalent to G Code 9 TIMER Y To use this feature press the remote control The screen below will be displayed Press the red button on the remote control to select EIN Enter the G Code programming number associated with your television programme The programming number can be f
45. D Once you press OK a message to confirm your action will appear on the TV System Menu Options continued Access settings underlined options are the factory default settings Childlock Change pin Enter PIN of your choice This will be used to access locked features PinCode You will be prompted to enter the four digit pin code When doing this for the first time use the alphanumeric keypad 0 9 on the remote control to enter any four digit pin code you prefer If you forget your four digit pin code key in 1504 enter any four digit you prefer and enter the same pin code again to confirm it With this feature you can prevent children from viewing certain discs or the recorded titles in the HDD When this feature is enabled it will appear as CHILDLOCK at the bottom of the coloured options screen whenever you select a title in the content menu You can press the Yellow button on the remote control to set the childlock on or off Note This recorder can memorise settings for 50 discs On Turns on child lock function A four digit pin code must be entered in order to play the locked disc or title in the HDD Off All discs can be played Use the alphanumeric keypad 0 9 to enter your new four digit pin code You must enter the same pin code again to confirm it To cancel your change press W to select Cancel in the menu and press OK on the remote control Features settings und
46. E Plus TV listings data is available or no such data is stored it will start recording the current channel from the last channel marker onwards for the next 6 six hours Record to Hard Disk Ld Start Rec Record from here Record Record Program OCancel rec BACK MORE INFO Press 6 RECORD again will set the recording time length Each subsequent press increases the recording time by 30 minute up to a maximum of 6 six hours You can turn off your TV and the recorder to standby mode while recording gt The recorder will continue recording and stop at the designated end time f you wish to stop the recording before the scheduled time press ll STOP Record a specific section of TV programmes Press INFO on the remote control to display the Time Shift video bar Use keys to select a TV programme that can be found in the temporary HDD storage Use lt P keys to search for the beginning of the scene where you want to start recording then press PAUSE Press the Red button on the remote control to start recording from here Press PLAY to continue playback Press NEXT P to search for the point where you want to end the recording and press W STOP on the remote control gt A red marking will be visible on the video bar to indicate the marked recording TIPS Setting an appropriate recording mode is important as it determines the picture quality
47. G downloading 95 Specifications Disc types Recording DVD R R DVD R Double layer DVD RW RW Playing DVD Video MP3 CD CD R CD RW Video CD SVCD DVD R RW DVD R RW Picture CD Audio CD Picture Display e D A Converter 12 bit 74 25 MHz A D Converter 9 bit 27 MHz Picture enhancement Progressive Scan Pixel Plus Video Upscalling Sound e D A Converter 24 bit 96 kHz Converter 24 bit 96 kHz e Crosstalk 1 kHz 100 dB e Dynamic range 1 kHz 90 dB Signal noise ratio 100 Sound system Dolby Digital MPEG2 Distortion and Noise 85 dB e Frequency response 20 20 000 Hz Video Recording Recording system PAL Compression formats MPEG2 MPEGI Audio compression Dolby Digital 2 0 Video Playback Compression formats MPEG2 MPEGI Video disc playback system NTSC PAL Audio Playback Compression formats Dolby Digital MP3 MPEG2 Multichannel MPEGI PCM e bit rates 32 320 kbps and VBR Storage Media Hard Disk capacity 400 GB HDD recording enhancement Time Shift Buffer Instant Replay Tuner Reception Transmission TV system PAL SECAM Aerial input 75 Ohm coaxial IEC75 DVB DVB Terrestrial 96 Connectivity Rear Connections RFantenna in RFTV out DVB in out Scart CVBS S Video RGB out Scart 2 CVBS S Video RGB in Decoder in Component Video out Progressive Interlaced S Video out V
48. GUIDE Plus system introduction After the GUIDE Plus setup and data download is completed you can start to explore the different features and areas of the GUIDE Plus system Press GUIDE on the remote control Use 4 P A keys to navigate in the menu mu un gt Kee EE Stevie Wie s dad used to due the family down from Glagow for their summer holidays in EEGEN N E icm the Sea Agents H Welcome The GUIDE Plus system is divided in six screen components A Information Panels Display instructions on the GUIDE Plus system programme promotions and advertisements Video Window Shows the picture of the current TV programme You can continue to watch the current programme while entering the GUIDE Plus system Action Bar Displays the available functions The action buttons are activated directly with the respective colour coded buttons on the remote control D Information Box Displays short programme descriptions or help menus E Menu Bar Displays the GUIDE Plus menus and your current selection Grid Tiles Displays the TV listings information by channel and time seven days in advance If certain channels are missing go to the Editor screen to check and change the channels see page 33 Press GUIDE to exit the menu Quick access functions There are several features integrated in the GUIDE Plus system These functions will
49. HALL GEMSTAR TV GUIDE INTERNATIONAL INC AND OR ITS RELATED AFFILIATES BE LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF PROFITS LOSS OF BUSSINESS OR INDIRECT SPECIAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION EQUIPMENT OR SERVICES RELATING TO THE GUIDE PLUS SYSTEM Due to the inconsistency of disc formats provided by various disc manufacturers your DVD system player recorder may require a playability enhancement or upgrade As DVD technology advances these enhancement will become common and will be easy to complete Go to www philips com support for software upgrade En raison de la diversit des formats utilis s par les fabricants votre syst me DVD peut n cessiter l ajout de p riph riques ou une mise niveau logicielle Au fur et mesure des progr s de la technologie DVD ces p riph riques se font de plus en plus courants et ais s int grer Pour t l charger la mise niveau logicielle visitez le site www philips com support Debido a los diferentes formatos de discos disponibles en el mercado es posible que deba realizar mejoras o actualizaciones en el sistema de DVD relativas a las funciones de reproducci n Conforme la tecnolog a DVD avanza estas mejoras estar n al alcance de todo tipo de usuarios y se podr n llevar a cabo f cilmente Visite la p gina www philips com support para buscar informaci n sobre actualizaciones de software Da das Disk
50. N CLOSE on the front of the recorder to open the disc tray Insert the CD R and press OPEN CLOSE again gt The software will start to install on the recorder automatically 90 WARNING Troubleshooting Under no circumstances should you try to repair the system yourself as this will invalidate the warranty Do not open the system as there is a risk of electric shock If a fault occurs first check the points listed below before taking the system for repair If you are unable to remedy a problem by following these hints consult your dealer or Philips for help Problem General Solution No power The message IS TV ON appears on the display panel The buttons on the recorder do not work Remote control does not work No picture 91 Press the STANDBY ON button on the front of the recorder to turn on the system Make sure the AC outlet has power This recorder will not operate until you complete the first installation Read chapter Step 3 Installation and Set up for details There is a technical problem Disconnect the recorder from the power outlet for 30 seconds then connect again If the recorder still will not operate then reset it to the default factory settings I Disconnect the recorder from the power outlet 2 Press and hold down STANDBY ON button on the front of the recorder while reconnecting to the power outlet 3 Release STANDBY ON button when STARTING appear
51. See Adding photos to an album If necessary edit the photos in the album gt See Edit the album Select the photo album in the menu and press gt PLAY to start the slideshow playback About Photo Roll Photo Album Photo roll is a folder for storing original JPEG pictures and they are protected It is comparable with a conventional 35mm film for cameras Rolls will be created automatically from the digital cameras Photo album contains different JPEG pictures created from the rolls You can delete an album without deleting the pictures of the rolls CONTENT SORTING PHOTO ROLLS PHOTO ALBUMS Adding photos to an album Insert a JPEG photo CD CD DVD RW DVD R gt The content menu appears Otherwise press HDD BROWSER and select Disc Tray in the menu Press repeatedly until the PHOTO ROLLS and INFO menus appear Select a photo roll folder and press OK to show the thumbnail pictures overview Overview Root OTOALBUM OSELECTALL SELECT OROTATE Use 4 AV keys to select the photo which you wish to add to the album and press the Yellow button on the remote control for SELECT To select all the photos press the Green button for SELECT ALL j To rotate the selected photo in 90 degree clockwise increments press the Blue button for ROTATE Press the Red button on the remote control for TO ALBUM gt The Add to P
52. To find a scene within the title Use dk keys To record the programme currently highlighted on the time shift buffer Press 6 RECORD once Note In the countries where no GUIDE Plus TV listings data is available or no such data is stored pressing RECORD will start recording the current channel from the last channel marker onwards for the next 6 six hours Press RECORD repeatedly to set the recording length by 30 minute increments To mark the start of recording from the current scene Press the Red button To mark the end of recording Press W STOP To cancel the marked recording Press the Red button Before Recording continued Default recording settings You can preset your recording settings in the recording setup menu lt gt AV PHILIPS ur Press SYSTEM on the remote control gt The system setup menu appears Press to select Preferences Press NEXT to select Recording Preferences DEER CD Use A keys to select the setting you wish to change and press NEXT P to access its options gt Instructions and explanations of the options are provided in the following pages gt If the selection in the menu is greyed out that means the feature is not available or not possible to change at the current state To exit press SYSTEM Record Mode settings chart Record Mode Hours of recordings can b
53. VD disc The layers are accessible from the same side of the disc so recording can occur completely uninterrupted TIPS Ensure that there is sufficient space available on the recordable DVD before recording You have to finalise the DVDR before it can be played on other players see page 72 from Hard Disk to recordable DVD continued Copying to a recordable DVD You can copy any recordings from the HDD to a recordable DVD The storage capacity of the disc depends on the recording mode that was selected for the recordings in the HDD see page 38 Before you start Be sure that no other recording is to be carried out while copying e g timer recording Turn on the TV to the correct programme number for the recorder e g EXT 0 Insert a recordable DVD into the recorder Press HDD BROWSER on the remote control gt The content menu appears Press NEXT P repeatedly until the TITLES and INFO menus appear 28 02 2005 DELETE G CHILD LOCK O PROTECT Use keys to select a title to copy and press the Green button on the remote control for COPY gt The making disc copy information appears Making Disc copy Title CH8 10 05 JAN 101 Length 52 min Available space 3 hr 03 min Archiving Time 19 min OERASEDISC OSTART CANCEL f you using DVD RW for recording you can press I44 Ito select the space
54. Yellow button on the remote control for SELECT Press the Green button on the remote control for MOVE gt A navigator will appear on the menu it enables you to select the position between the photos Use 4P A Y keys to move the navigator around the menu and press OK to confirm the position where you want to insert the photo s To rotate a photo Select the photo in the menu and press the Blue button for ROTATE To remove a photo from the album Select the photo in the menu and press the Red button on the remote control for REMOVE j TIPS Press BACK to go back to previous menu item 60 Additional Playback Features continued Searching forwards ec backwards You can fast forward fast reverse a disc during playback and select a desired E search speed During playback hold down 144 reverse as PLAY or gt gt I forward until the search speed Op status bar 4X or 4X appears on the 55 05 144 ER 8888 TV Sc gt The sound will be muted Press the 44 reverse or ER forward repeatedly to cycle through the different ns search speed 4X 8X 32X 4X 8X Selecting another title 32X chapter track To resume normal playback press gt PLAY When a disc contains more than one track title or chapter you can change to a different track
55. ading and writing of large amounts of data at high speed Glossary JPEG A very common digital still picture format A still picture data compression system proposed by the Joint Photographic Expert Group which features small decrease in image quality in spite of its high compression ratio A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group or MPEG I Audio Layer 3 By using the MP3 format one CD R or CD RW can contain about 10 times more data then a regular CD MPEG Motion Picture Experts Group A collection of compression systems for digital audio and video PBC Playback Control Refers to the signal recorded on video CDs or SVCDs for controlling playback By using menu screens recorded on a Video CD or SVCD that supports PBC you can enjoy interactive playback and searching PCM Pulse Code Modulation A digital audio encoding system Progressive Scan The progressive scan displays twice the number of frames per seconds than ordinary TV system It offers higher picture resolution and quality Region code A system allowing discs to be played only in the region designated This unit will only play discs that have compatible region codes You can find the region code of your unit by looking on the product label Some discs are compatible with more than one region or ALL regions S Video Produces a clear picture by sending separate signals
56. al Check the antenna connections and position Position the antenna to reach best signal quality SCH Although this recorder selects all the available digital TV channels during basic installation you may want to repeat the process later if more channels become available in your area or if you are reinstalling the recorder It also allows you to adapt the digital TV and radio channels to your personal preference Press SYSTEM on the remote control Select Setup in the menu and press NEXT P repeatedly to select Digital Ch Press V repeatedly to select the following settings in the menu and press NEXT P to enter its options Press OK to mark your favourite digital TV radio channels for quick access by using the channel up down button on the remote control va The TV radio channels can be accessed by using the CH on the remote control L1 The TV radio channels can only be accessed by pressing the corresponding number button on the remote control According to your preference you can change the order of the stored TV channels 001 004 TELET 004 002 005 CHAN 005 007 SBS6 Use keys to select the TV radio channel that you want to move and press OK to confirm Use keys to shift the TV radio channel to the desired position and press OK to swap the TV radio channel with the TV radio channel at the current position Note During sorting the alphanumeric keypad 0 9 on the remote control can b
57. alised Check that the cable is plugged in firmly If a recording is made from a video recorder change the tracking on the video recorder This recorder may not be able to recognise the video input signal if this signal is poor or does not comply with relevant standards aerial signal received for the current channel or no video signal received from the external input channel EXTI EXT2 or CAM2 Check the antenna connection Check the connection and turn on the connected device Problem Playback Disc will not play The picture is distorted or black and white during playback There is picture or sound interference with the TV reception Distorted sound coming from a connected hi fi amplifier The recorded DVD cannot be played back on another DVD player 93 Troubleshooting continued Solution Insert the disc with the label facing up The child lock is on Read chapter System Menu Options Access settings Child lock for details Wrong region code The DVD must be coded for ALL regions or Region 2 in order to play on this recorder There is no recording on the disc or wrong disc type Read chapter Playback from Disc Playable discs for details Make sure the disc is not scratched or warped Clean the disc or use a new one Check if the disc is defective by trying another disc The disc does not match with the TV colour system standard PAL NTSC The disc is
58. and recording time to the HDD or a recordable DVD see page 38 39 Record to Hard Disk continued Simultaneous record and play function While recording the TV programme to the HDD is in progress you can play a previously recorded title from the HDD or play a DVD video disc or watch the playback from other connected devices HDD BROWSER PLAY PHILIPS Sm Playback from HDD Press HDD BROWSER then press NEXT P repeatedly until the title menu appears DH Recoding Date Delete Order Protected o Disc Tray o Disc Library Genre Last Played ODISK INFO Use AV keys to select a title in the HDD content menu and press PLAY to start playback Playback from DVD Press OPEN CLOSE on the recorder s front panel and load in a disc to start playback Playback from other device This is only possible if this recorder is connected to the TV using the EXT TO TV I O socket Press TV HDD to view the picture from the device which is connected to the EXT2 AUX I O socket of this recorder Watching other TV programmes If there is no device connected to the EXT2 AUX I O socket pressing TVIHDD vwill switch to the TV mode Use the TV s channel up down button to select a different TV channel Helpful Hint Remember to turn the TV back to its video input channel if you want to watch the TV channel through the recorder or play
59. any connections make sure that all the devices are disconnected from the power outlet Step 1 Basic Recorder Connections continued HDMI OUT 22 oO 3l o GU B STEREO TV Connecting the audio cables This connection enables you to listen to the playback from this recorder However this connection is not required if this recorder is connected to the TV using the Scart or HDMI connectors Option Using the analogue audio sockets You can connect the recorder to a two channel stereo system mini system TV or receiver in order to enjoy the stereo sound system Use an audio cable red white not supplied to connect the OUT2 AUDIO LIR sockets to the audio input sockets of the connected device Helpful Hint If you have connected this recorder to your TV using the OUTI Y Pr Ps sockets then connect the audio cables to the OUTI AUDIO L R sockets as described in page 19 TIPS DIGITAL AV amplifier receiver Option 2 Using the digital audio socket Optical or Coaxial You can connect the recorder to an AV amplifier receiver in order to enjoy multichannel surround sound Use a coaxial cable not supplied to connect the COAXIAL OUT socket to the digital coaxial input socket or labelled as COAXIAL IN or DIGITAL IN of the connected device an ANN receiver or amplifier with a digital multi channel sound decoder
60. ayers and DVD ROM drives in computers What is the capacity of a DVD R and DVDtRW 4 7GB or equivalent to six CDs You can store only one hour of recording on a single disc at the highest quality DVD standard and about 8 hours recording at the lowest quality VHS standard What is the difference between DVD R and DVDtRW DVD R is recordable and DVD RW is erasable and rewritable With a DVD R you can record multiple sessions on the same disc But when the disc is full you cannot record any more on the disc The DVD RW allows you to record over the same disc literally hundreds of times What is DV IN socket DV Digital Video IN socket on this recorder is an i LINK compliant input socket You can connect a DV equipped camcorder to this recorder using a single DV cable for copying digital video digital audio and data This recorder is only compatible with DV format DVC SD camcorders Digital satellite tuners and Digital VHS video recorders are not compatible You cannot connect more than one DV camcorder at a time to this recorder You cannot control this recorder from external equipment connected via the DV IN socket tis not possible to record the contents from this recorder to your DV camcorder via the DV IN socket Can I copy a VHS tape or DVD from an external player Yes but only if the VHS tape or DVD is not copy protected What are Titles and Chapters A DVD disc
61. back the recorded disc TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD see page 38 40 Record to Hard Disk continued Direct recording from TV If you have connected this recorder to your TV using a scart cable you can immediately start recording the programme analogue TV channels only which is currently being shown on the TV while the recorder is in standby mode Ensure that the Direct rec mode in the recording setting is turned on see page 38 While watching the TV programme press RECORD on the remote control to start recording To stop recording press STOP gt Otherwise it will stop automatically after 6 six hours of recording Automatic recording from Satellite Receiver The feature is only applicable for the Satellite Receiver or any similar devices that is connected to the EXT2 AUX I O scart socket of this recorder In addition the Satellite Receiver must have a timer function that is able to control the recording function of this recorder Ensure that the Sat record mode in the recording setting is set to EXT2 see page 38 Use the Satellite Receiver s timer programming function to programme the recording refer to the Satellite Receiver s user manual gt You can only programme up to 6 six hours of recording Leave the recorder and Sate
62. ber of chapters per title is 99 and 255 per disc MAX TITLE The maximum number of titles has been reached for the disc Each disc can have a maximum of 49 titles UPDATING MENU After a successful recording the list of disc contents is updated NO DISC No disc has been inserted If a disc has been inserted then it is possible that the disc cannot be read NOSIGNAL No signal or poor signal strength NTSC DISC A disc with NTSC recordings has been inserted and an attempt was made to record a PAL signal Insert a new disc or use a disc containing PAL recordings OPENING Disc tray is opening PAL DISC A disc with PAL recordings has been inserted and an attempt was made to record an NTSC signal Insert a new disc or use a disc containing NTSC recordings PHILIPS The recorder has been turned on PHOTO MMM NNN Number of the current photo for Photo mode MMM represents the order of the current photo NNN represents the total number of photos in the album If the number exceeds 999 999 will be displayed instead POST FORMAT The disc is being prepared after the menu structure has been created COPY PROTECTED Title is copy protected and cannot be recorded READING Disc is being recognised by the recorder REC A recording is currently in progress STANDBY The recorder has been turned off SYS MENU The on screen menu display is on VCD A VCD has been loaded into the recorde
63. ble cleaners or anti static sprays intended for discs Hard Disk Drive HDD handling care The hard disk drive HDD has a high storage density that enables long recording duration and high speed data access Depending on the setup environment and handling some content may be damaged resulting in failure of playback and recording To avoid damage to the HDD and losing important data observe following precautions Do not move the recorder or subject it to vibration Do not remove the AC power plug from the mains socket without switching the recorder to standby mode WARNING The HDD is not a device for storing recorded content permanently We recommend that you copy the important video content to a recordable DVD disc as backup Introduction This recorder is equipped with a digital tuner DVB Digital Video Broadcast to receive free to air digital terrestrial TV signals and an analogue tuner to receive analogue TV channels It also has a built in Hard Disk Drive 400 GigaByte that can record up to 650 hours of video in SEP super extended play record mode This gives you the flexibility to keep recordings on the HDD or copy to a recordable DVD for safekeeping or later viewing In addition it has a built in GUIDE Plus system The GUIDE Plus system offers a free programme listings guide for all the TV programmes available in your area You can also use the GUIDE Plus system to programme your
64. cable to connect the two A sockets on the recorder Use the supplied RF coaxial cable to connect the TV amp socket on the recorder to the antenna input socket or labelled as VHF UHF RF IN on your TV Use the scart cable to connect the EXTI TO TV I O socket on the recorder to the corresponding SCART input socket on the TV Use another scart cable to connect the EXT2 AUX I O socket on the recorder to the Scart output socket or labelled as TV OUT or TO TV on the VCR Helpful Hints Most commercial video cassettes and DVDs are copy protected and therefore cannot be recorded Connect the recorder directly to the TV If there is a VCR or an additional device in between the picture quality may be poor because of the copy protection system built into this recorder TIPS Refer to the respective connected device s user manual for other possible connections Step 2 Optional Connections continued Back ofa example only ac Back of a Satellite Box example only Connecting to aVCR and Cable Box Satellite Receiver Keep the existing antenna connection to the Cable Box Satellite Receiver Use the supplied RF coaxial cable to connect the antenna output RF OUT socket on the Cable Box Satellite Receiver to the ANTENNA socket on the recorder Use the supplied Tuner interlink
65. cable to connect the two A sockets on the recorder Use another RF coaxial cable to connect the TV socket on the recorder to the antenna input socket on the TV Use the scart cable to connect the EXTI TO TV I O socket on the recorder to the corresponding SCART input socket on the TV Use another scart cable to connect the EXT2 AUX I O socket on the recorder to the Scart output socket or labelled as TV OUT or TO TV on the VCR Use another scart cable to connect the Scart input socket or labelled as TV IN or TO DECODER on the VCR to the Scart output socket or labelled as TV OUT or TO VCR on the Cable Box Satellite Receiver TIPS Refer to the respective connected device s user manual for other possible connections 23 Step 2 Optional Connections continued Connecting to a camcorder You can use the front sockets to copy camcorder recordings These sockets are located behind the flap on the right hand side which provides convenient connections for a camcorder Option Using the DV IN socket Use this connection if you have a Digital Video or Digital 8 camcorder The DV socket conforms to the i LINK standard It provides the best picture quality Use an i LINK 4 pin cable not supplied to connect the DV IN socket on the recorder to the appropriate DV OUT socket on the camcorder gt Press CAM on the remote control to select CAM2 when using this input s
66. contains Titles and Chapters which are similar to the Titles and Chapters of a book A Title is often a complete movie and is broken down into Chapters or individual scenes from the movies X Tite Chapter Chapter Chapter Chapter chapter markers Programmes are recorded as a single title They may consist of one chapter or a few chapters within a title depending on the recording settings How do I set up Titles and Chapters The recorder will automatically create a new Title every time you start a new recording You can then add Chapters to these recordings manually or have them automatically inserted at a specific intervals What does finalising a disc do Finalising a disc locks the disc so it can no longer be recorded This is only required for DVD R It will then be compatible with virtually any DVD player To remove a disc without finalising it simply stop recording and eject the disc You will still be able to record on the disc if there is storage space for more recordings How good is the quality of the recording There are a few picture quality levels to choose from ranging from HQ I hour recording at high quality to SEP 8 hours recording at VHS quality on a recordable DVD Record Mode Hours of recordings can be stored on the E HDD or an empty DVD recordable disc HDD DVD R DVD RL 400 GB DVD RW Double Layer 80 1 HQ high quality 1 hr 55
67. ct Compatible in the menu and press OK to confirm gt If the option is not available for selection it means that the disc is already compatible Finalising the DVD R for playback It is necessary to finalise DVD R disc before you can play it on another DVD player Otherwise the DVD R will only play back on this recorder After a DVDER disc has been finalised no further recordings or editing can be made to it Make sure that you have completed all the recordings and editing before finalising the disc Insert a recorded DVD R into the recorder gt The Index Picture screen appears Otherwise press HDD BROWSER and select Disc Tray in the menu then press NEXT gt Press EDIT on the remote control gt The edit menu appears Use A keys to select Finalise in the menu and press OK to confirm A warning message appears Press OK on the remote control to proceed gt Finalisation may take more than 30 minutes depending on the length of recordings 2 Do not try to open the disc tray or turn the power off as this may render the disc unusable Otherwise select Cancel in the menu and press OK to abort the operation TIPS No further recording and editing can be carried out on a finalised DVD R Press BACK to go back to previous menu item Press EDIT to exit the menu 72 Edit Recordings Recordable DVD continued Video editing This recorder allows you to
68. ct On General Information Read the instructions on the TV and confirm your action by pressing OK gt The setup is now completed and you can start to enjoy the high quality picture Otherwise select Cancel and press OK to go back to the previous menu 6 To exit the menu press SYSTEM If no picture is displayed Disconnect the recorder s MAINS from the power supply Hold down 44 on the recorder whilst reconnecting its MAINS to the power supply Helpful Hint There are some progressive scan TVs and High Definition TVs that are not fully compatible with this unit resulting in an unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode In such a case turn off the progressive scan feature on both the recorder and your TV If the HDMI video output is turned on the progressive output signal will be disabled Copyright notice The making of unauthorised copies of copy protected material including computer programmes files broadcasts and sound recordings may be infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes Frequently Asked Questions What kind of disc should I use for recording You can only record on DVD R DVDRW or DVD R DL discs DVD R RW is the most compatible recordable DVD format in the market today They are fully compatible with most of the existing DVD Video pl
69. deo Digital Versatile Disc VIDEO Audio CD Compact Disc dE Digital Audio DIGITAL AUDIO Video CD diS Formats 1 0 1 1 2 0 ISG Super Video CD ose SUPER VIDEO CD R CD Recordable COMPACT Audio Video format or 0 MP3 JPEG files CD RW CD Rewritable COMPACT Audio Video format or 0 MP3 JPEG files Playback from Disc IMPORTANT If the inhibit icon X or appears on the TV screen when a button is pressed it means the function is not available on the current disc or at the current time DVD discs and players are designed with regional restrictions Before playing a disc make sure the disc is for the same region zone as your player Starting disc playback Qo Press STANDBY ON to turn on the recorder Press OPEN CLOSE on the front of the recorder You can also hold down the lil STOP button on the remote control to open and close the disc tray Carefully place the disc into the tray with the label facing up then press OPEN CLOSE gt For double sided discs load the side which you want to play facing up Turn on the TV to the correct programme number for the recorder e g EXT 0 AV Playback may start automatically If not press HDD BROWSER to show the content menu Highlight Disc Tray the menu and press NEXT gt Navigate in the menu to select a track title and press gt PLAY If the pin code entry dialogue appears on
70. dirty Clean the disc Sometimes a small amount of picture distortion may appear This is not a malfunction Have your aerial or cable TV signal checked Fine tune your TV channel Read chapter System Menu Options Analogue Channel settings Fine Tuning for details Do not connect any cables from this recorder to the Phono input of your amplifier If you are playing a DTS CD you must use the COAXIAL or OPTICAL DIGITAL AUDIO OUTPUT socket of this recorder to connect to the Hi Fi system or amplifier If the Hi Fi system or amplifier does not support DTS distorted sound might be occurred If a recording is too short it is possible that a DVD player cannot detect it Observe the following minimum recording times Recording mode HQ 5 minutes SP 10 minutes SPP 13 minutes LP 15 minutes EP 20 minutes SLP 30 minutes SEP 30 minutes Some DVD players cannot play back DVDXRW recordings You can solve this problem by using a special function 1 Press OPEN CLOSE on this recorder to open the disc tray 2 Insert the disc but do not close the tray 3 Hold down the number button 2 on the remote control until the tray closes The disc is modified 4 If this fails to produce the desired result repeat the procedure using the number button 3 on the remote control 5 You can restore the disc to its original condition by pressing and holding number button 1 Warning There is a
71. e INFO menu indicating title is still part of the recording in the Time Shift Buffer 8 title is locked title is protected lt title has been viewed title has been edited se eys to select a title and press Use key le and p PLAY to start playback During playback you can use the following buttons on the remote control to access additional playback features Aal move to the beginning or previous next chapter hold down this button for fast backward forward search Press the button again to increase the search speed x4 x8 x32 while in pause mode start slow motion playback TIPS Press HDD BROWSER to exit the menu lt REPLAY NEXT gt jump backward forward by a fixed time period see page 79 INFO display the title information H PAUSE view a still picture STOP stop playback n 2 amp INFO Y Ce NEXT REPLAY HDD BROWSER gt PLAY Viewing the hard disk information Press HDD BROWSER Press the Blue button on the remote control for DISK INFO gt Total hard disk space and the available free space for recording will be displayed gt If the free space is below 10 delete or unprotect some titles in the HDD Maximum free space indication is 9076 HARD DISK INFO Total space Free space Helpful Hint When the hard disk is full pressing RECORD but
72. e select Cancel in the menu and press OK to abort the operation Turn on the DV camcorder and start playback TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD see page 38 46 Record to Hard Disk or recordable DVD continued Press the Blue button on the remote You can pause play stop fast forward or control for AUTO REC rewind the scene using the 4 gt keys on the recorder s remote control to select the respective control buttons the screen gt To stop the recording press STOP Record entire DV tape gt Both the recorder and camcorder will Cancel stop Note The AUTO REC option can only Q To exit press TUNER be activated while in camcorder play or pause mode Helpful Hints Some camcorders cannot be controlled To copy the entire DV tape using this recorder s remote control Select Record entire DV tape in Mixing of PAL and NTSC video format the menu and press OK to confirm recording on a same recordable DVD is not gt The camcorder will rewind the tape bossible and start recording from the beginning If a part of the tape is blank the recorder will pause recording Recording will restart To copy the newly recorded automatically when there is a recordable contents from the DV tape signal However if there is more than 5 five
73. e 24 Find the place on the camcorder that you want to start recording from and set the camcorder to pause mode Turn on the TV to the correct programme number for the recorder e g EST 0 AV Turn on the recorder and press CAM on the remote control gt Media type selection screen appears To continue select to record to Hard Disk or Recordable DVD in the menu and press OK to confirm gt All the contents in the temporary HDD storage will be cleared except for the marked recordings Otherwise select Cancel in the menu and press OK to abort the operation Press CH repeatedly to select the correct input channel that matches the connected socket of the device gt CAM I S VIDEO or VIDEO socket at the front gt EXT EXTI TO TV I O scart socket at the back gt EXT 2 EXT2 AUX I O scart socket at the back Press RECORD to start recording and press PLAY button on the camcorder to start playback To pause the recording press PAUSE To continue recording press PAUSE again gt A new chapter marker is created after recording restarts for recordable DVD only To stop the recording press B STOP gt A new title will be created when you begin another recording To exit press TUNER TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a
74. e DVD before recording You have to finalise the DVDR before it can be played on other players see page 72 51 Using the Disc Library The Disc Library is an integrated database in this recorder It gives you a quick and easy access to the recordings you have made onto the recordable DVDs The Disc Library keeps the information on which video is recorded on which disc length of recording and remaining disc space Storing the recorded DVD data in the Disc Library This recorder will assign the disc a number and keep track of what you have recorded and update the data automatically whenever you add in new recording to the disc Press HDD BROWSER on the remote control and press V to select Disc Tray Load in a recordable DVD gt If TO LIBRARY appears it means this disc has not been added to the Disc Library SOURCE CONTENT O Hard Disk e sc E N o Audio bo Photo Disc Library Press the Blue button on the remote control for TO LIBRARY gt The assigned disc number appears and the disc tray opens automatically Write the same disc number on the disc and disc s cover for easy locating of the appropriate disc next time then press OK to exit Finding a recorded title To do this the recorded disc data must have been stored in the Disc Library The appropriate disc does not have to be in the recorder Press HDD BROWSER on the remote control
75. e next digit field Once complete press OK 00 00 00 Use A V keys to set the hours minutes and seconds press NEXT P to move to the next digit field Once complete press OK Sound settings underlined options are the factory default settings Sound mode Night mode This setting is only required if you used the recorder s AUDIO OUT L R sockets to connect other audio video device Stereo Select this to hear the sound from the left and right audio channels Use this setting when this recorder is connected to a TV or Stereo system Surround Select this if the connected audio video device is compatible with Dolby Surround Dolby Digital and MPEG 2 multi channel are mixed to a Dolby Surround compatible two channel output signal This mode optimises playback of sound at low volume High volume outputs will be softened and low volume outputs are brought upward to an audible level On Turns on night mode Off Turns off night mode feature Selects this to enjoy the surround sound with its full dynamic range Disc settings Adapt menu Delete all If a DVD RW has been recorded in a computer drive or in another recorder the Picture Index screen may not be displayed correctly This feature allows you to change the format of the disc to the Philips type Once you press OK a message to confirm your action will appear on the TV Select this to delete all the recordings from the current recordable DV
76. e stored on the HDD or an empty DVD recordable disc HDD DVD R DVD4RE 400 GB DVD RW Double Layer 80 1 HQ high quality 1 hr 55 mins SP standard play 3 hrs 40 mins SPP standard play plus 4 hrs 35 mins LP long play 5 hrs 30 mins EP extended play 7 hrs 20 mins SLP super long play 11 hrs 5 mins SEP super extended play 14 hrs 45 mins Helpful Hints Changing the Recording Mode will clear the contents in the temporary HDD storage only the marked contents in red bar will be recorded onto the hard disk drive HDD of this recorder You can record up to 500 titles on the HDD if the hard disk capacity is sufficient Your TV picture quality will be changed according to the selected recording mode 37 Before Recording continued Recordings underlined options are the factory default settings Record mode Language Auto protect Chapters SAT record Direct rec 5 1 Recording The recording mode defines the picture quality of recordings and the maximum recording time on the HDD hard disk drive see page 37 on Recording Mode Setting Chart Important When copying from HDD to a recordable DVD the recording mode of the selected recording in the HDD will automatically be transferred Selecting another recording mode is not possible The factory default setting is SP Selects the recording language to be used for TV programmes analogue TV channels only w
77. e used to select a preset number This adds only the new channels to your existing preset list after the last free preset position New channels refer to the channels that are currently not installed Press OK to start new channels search and install Press OK to start digital channels search and install It will replace all previously stored digital TV radio channels Press OK to display signal strength and quality information of the digital tuner It will help to find the best position of antenna Use keys to change the frequency or channel number and press OK to check the signal quality Position the antenna at the area where the maximum signal quality is reached System Menu Options continued Video Output settings underlined options are the factory default settings Black Level Horizontal Video Output Progressive Video upscalling HDMI output The picture shape can be adjusted to fit your TV 4 3 Letterbox For a wide screen display with black bars on the top and bottom 4 3 PanScan For a full height picture with the sides trimmed 16 9 For wide screen TV frame ratio 16 9 Adapts the colour dynamic for NTSC disc Normal Normal colour contrast Enhanced Improve the colour contrast and brightens the picture of an NTSC compatible DVD Use 4 gt keys to adjust the horizontal position of the picture on your TV screen press OK to confirm the setting Choose
78. econds NEXT to enter its options gt The camera angles available for selection appear Use the alphanumeric keypad 0 9 to enter the time where playback should start and press OK to confirm Use A V keys to select the camera gt Playback skips to the time entered angle you want to switch to then press 4 to confirm This option allows you to enlarge the picture on the TV screen and to pan through the enlarged picture Press V to select Zoom and press NEXT P to enter zoom in mode gt The zoom status bar appears and displays the zoom factor Press the Blue button on the remote control to zoom in or Yellow button to Zoom out Use lt 4 P gt A Y keys to pan through the zoomed picture To exit zoom mode press the Red button TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 64 Edit Recordings Hard Disk Changing the title name Some TV channels transmit the name of the programme In this case the programme name will automatically be stored when recording to the HDD Otherwise only the programme number and date time of the recording will be stored as title name Press HDD BROWSER on the remote control then press NEXT P repeatedly until the TITLES and INFO menus appear HDD TITLES 13 01 00 VY S EFG 31 03 2005 40 22 00 m 28 02 2005 Use
79. edit the video content after a recording has been made You can add delete chapter marker or hide unwanted scenes lt Tite Chapter Chapter Chapter Chapter chapter markers When you play back a recording in video edit mode the entire recording will be played back including the hidden scenes Insert a recorded DVD into the recorder gt The Index Picture screen appears Otherwise press HDD BROWSER and select Disc Tray in the menu then press NEXT P Use A keys to select a title and press PLAY to start playback Hold down 144 gt gt I keys or use lt gt keys on the remote control to search for the scene you want to edit then press II PAUSE Press EDIT on the remote control gt The video editing menu appears ONO CHAPTERS OCHAPTER TITLE 1 Q Press the matching colour coded buttons on the remote control to access the options displayed at the bottom of the menu erg ooo 8050 NO CHAPTER Red button Select this to erase all the chapter markers in the current title CHAPTER Green button Select this to access chapter editing menu OMERGE O BACK SPLIT HIDE MERGE Select this to merge the current chapter with the chapter before it Note If the two chapters were hidden then the joined chapter will also be hidden BACK
80. el recording Digital 5 channel recording lets you capture the original sound from digital multi channel sources such as the Cable Box Satellite Receiver when you record a video that produces the full cinema sound experience Dolby Digital DTS surround or DTS ES Dolby Digital EX 5 I channel recording is only possible in HQ and SP recording mode What is MHEG Multimedia and Hypermedia information coding Expert Group is the ISO IEC TCISC 29 working group which provides standards for the coded representation of multimedia hypermedia information objects that are interchanged among applications and services using a variety of media The objects define the structure of a multimedia hypermedia presentation 89 Software Upgrade Installing the latest software Periodically Philips will issue upgrades for the software that was initially installed in your recorder as the software is continuously refined for greater stability and compatibility of the recorder CAUTION Power supply must not be interrupted during upgrade Get the version information of this recorder by pressing SYSTEM on the remote control and select Setup gt System gt Version Info in the menu gt Write down the information for your current software version Visit the Philips website www philips com support to check the availability of the latest software upgrade Download the software to a CD R Press OPE
81. elect the TV channel that you want to move and press OK to confirm Use V keys to shift the TV channel to the desired position and press OK to place the TV channel at the current position Press OK to mark your favourite TV channels for quick access by using thd channel up down button on the remote control The TV channels be accessed using the CH on the remote control L1 The TV channels can only be accessed by pressing the corresponding number button on the remote control System Menu Options continued 5 em OSTORE Entry Mode Preset Preset name Decoder TV system Finetune OSEARCH In some cases not all of the available TV channels may have been found and stored during basic installation In this case you will need to search for and store the missing or coded TV channels manually Press SYSTEM on the remote control Select Setup in the menu and press NEXT P repeatedly to select Analogue Ch ress repeatedly to select the following settings in the menu an V repeatedly lect the foll g g h d press NEXT to enter its options Select manual search based on channel allocation or frequency entry Channel S Channel Special channel MHz frequency Note S Channel refers to specified hyperband channels Use the alphanumeric keypad 0 9 to enter the frequency channel number press OK and the Green button for STORE OR Press the Blue button o
82. enu Go direct to step You can connect up to three external receivers e g satellite receiver cable box to this recorder Complete the installation of the external receiver as follows Use A V keys to select External Receiver 1 20r 3 and press OK b Press OK again to continue Select the type of the external receiver and press OK Cable Select this for cable receiver cable box Satellite Select this for satellite receiver Terrestrial Select this for digital terrestrial decoder box Select the service provider from the list and press OK None Select this if you do not have a provider d Select the brand of your receiver from the list and press OK None Select this if you do not find your brand TIPS After completing the setup leave the recorder in standby mode and turn on your external 28 receivers overnight to receive the TV listing data Step 4 Set up the GUIDE Plus system continued e Identify the socket through which your complete press GUIDE to exit external receiver is plugged into the the menu recorder for example EXT 2 for i 2 AUX I O and press OK Leave the recorder in standby mode Antenna RF lead Select this if the external receiver is connected via the antenna cable Enter the programme number which your external receiver is tuned to on your recorder If you have connected an external receiver
83. erlined options are the factory default settings Auto resume With this feature you can resume playback of the disc from its last stopped point This applies to the last 20 DVDs and Video CDs you played Off The disc will always start from the beginning when you load a disc or start playback Turns on auto resume mode When playback stopped the content menu will appear To resume playback press OK while selecting the title in the menu Note Pressing PLAY will cancel the resume mode and start playback from the beginning of the disc System Menu Options continued Recorder Setup Before you start see page 79 Mark the contents in the temporary HDD storage time shift buffer for which you wish to record to the HDD see page 36 Otherwise all the contents will be cleared when you access the Setup option see page 80 see page 81 82 Press SYSTEM on the remote control gt The system setup menu appears Press repeatedly to select Setup see page 83 and press NEXT P gt A warning message appears Press OK to continue or select No in the menu to abort the operation gt Playback will pause see pages 84 85 Sien Time date Analogue Ch Video output ETHER see page 85 Press NEXT P repeatedly to view the available setup options then press V to access gt Instructions and ex
84. ers numbers or letters in appropriate entry fields Selects a chapter track title number to play Selects the recorder s preset tuner channel Toggles between T title and C chapter selection during disc playback then use the 144 FR keys to select a title chapter number alA Toggles between upper and lower case characters while using the alphanumeric keypad Selects multiple photos in the thumbnail menu Q PLAY gt Starts playback of the selected title track STOP Stops playback recording Hold down this button to open or close the disc tray Q3 PAUSE II Pauses the playback or recording Press repeatedly to advance a paused picture one frame at a time Remote Control continued ez an E mm Returns to the previous menu on a video CD VCD or some DVDs e CAM Accesses the camcorder mode CAM2 for DV camcorder recording n camcorder mode press CH to select other external input source CAMI EXTI or EXT2 Wa ER Day Day Skips to the previous or next day in the GUIDE Plus system Skips to the previous or next title chapter track Hold down this button for fast reverse or fast forward search Remote Control continued ing th 1 Using the remote control Usine the remote operate the system Aim the remote control directly at the re
85. f JPEG file cannot be played on this recorder It may require longer time for the recorder to display the disc content on the TV due to the large number of songs pictures compiled into one disc Disc with no name will be displayed as Unknown Data If any special characters are present in the MP3 track name ID3 or album name it might not be displayed correctly on the screen because this recorder does not support the characters Supported JPEG picture formats File format The file extension has to be JPG and not JPEG t can only display DCF standard still pictures or JPEG pictures e g TIFF It cannot play back moving pictures Motion JPEG progressive JPEG and other formats or pictures in formats other than JPEG or pictures associated with sound e g AVI files TIPS Some discs cannot be played on this DVD recorder due to the configuration and characteristics of the disc or due to the condition of recording and authoring software that was used 58 Additional Playback Features Creating a slideshow playlist album You can customise the JPEG picture slideshow playback within a disc by storing your selection in an album This recorder can handle up to a maximum of 100 JPEG pictures in one album on a recordable disc depending on the JPEG file parameters Collect your favourite photos from the PHOTO ROLLS and add to an album for creating a new slideshow playlist gt
86. few minutes to complete Date 31 01 2006 ZE This will search and install all Analogue and Digital channels and services Disc tray will not open until setup is completed X i If the information is correct select Skipsearch Done in the menu and press OK Disc tray will not open until setup is completed ii If changes are required use the alphanumeric keypad 0 9 to enter the correct time and date in the respective field Note Make sure you have successfully made all the required connections to this recorder the TV and Satellite Receiver Cable Box if any and turned them on The channel search The basic installation is now completed will detect the signals and save all the available programme channels Easy setup completed Continue with the GUIDE Plus installation If no channels are found Try the auto TV channel installation after completing the basic setup see page 81 Disc will not open until setup is completed The recorder continues with the digital channel search TV and radio i Select Continue in the menu and press OK to start the GUIDE Plus Digital channel search installation See next page for the This may take a few minutes Please wait complete detailed setup ii Select Do not install now in the menu to skip the GUIDE Plus installation The next time when you want to install the GUIDE Plus system press GUIDE on the re
87. for the luminance and the colour You can use S Video only if your TV has an S Video In socket Title The longest section of a movie or music feature on DVD Each title is assigned a title number enabling you to locate the title you want VIDEO OUT socket Yellow socket on the back of the system that sends the DVD picture video to a TV 97 Display panel symbols messages The following symbols messages may appear on your recorder display Tm iY EO E ae 1 d i te i i de LI 1 kant Q PSCAN S 00 00 Multifunction display text line Title track number Total elapsed remaining title track time Disc title name Error or warning messages Additional information regarding the disc TV channel number or source of video Clock This is displayed in Standby mode TV programme title Y Tuner is selected as visible source HET Camara mode is the current active source Disc is the current active source 0 Hard disk is the current active source DTV Digital TV tuner is the current active source P SCAN The video output is in progressive scan quality oO Pixel Plus picture enhancement is turned on TIMER A timer recording has been programmed or is active SAT The recorder is prepared for satellite recording BLOCKED The disc tray cannot be opened or closed due to some mechanical obstruction
88. ft video bar by pressing the INFO 9 button on the remote control For more information about the temporary HDD storage Time Shift Buffer see page 36 Pause live TV function Sometimes you might be interrupted when watching your favourite TV programme or match Now you can pause the show by pressing PAUSE on the remote control and press gt PLAY to resume playback It behaves exactly as if you were in control of the live broadcast If you want to return to the live TV programme just press TUNER Instant replay function When watching a live TV programme you can press 4 REPLAY on the remote control to jump back one 1 minute default setting upon every single press for instant replay If you want to return to the live TV programme just press TUNER FlexTime function You do not need to wait until the recording is completed before starting playback While the recording is in progress press A on the remote control to go back to the beginning of the recording and start playback or hold down 4 until you reach the scene to begin TIPS Press INFO on the remote control to display or remove the Time Shift video bar 34 Control TV Programmes continued Watching digital TV radio Viewing digital text service broadcast MHEG This DVD recorder is able to receive for UK only free to air DVB T Digital Video Many digital TV channels broadcast Broadcast Terrestrial and
89. h Definition Multimedia available when using Y Pb Pr connection Interface is a digital interface that allows and a progressive scan TV is required It pure digital video transmission without provides superior picture quality when the loss of image quality watching DVD movies Use an HDMI cable not supplied to Use the component video cables red connect the HDMI OUT on this blue green not supplied to connect the recorder to the HDMI IN on a HDMI OUT I Y Pn sockets on the compatible device e g HDMI TV HDCP recorder to the corresponding compliant DVI TV component video input sockets or leted th labelled as Y Pb Cb Pr Cr or YUV on Once you have completed she peeessey connections installation and set up see pages 84 85 for optimum HDMI setting Use an audio cable red white not supplied to connect the OUTI Helpful Hints AUDIO L R sockets on the recorder to Digital devices from different the audio input socket or labelled as manufacturers may have different output AV IN or AUDIO IN on the TV standards which may result in unreliable signal transfers connections and the recorder basic The HDMI connector is only compatible i with HDMI compliant devices and DVI TV installation set up turn on the f feat 87 The teletext information will not be RE E EES accessible in the recorder s tuner mode Once you have completed the necessary TIPS Before making or changing
90. he album and track to play then press gt PLAY During playback you can press 144 gt gt to select the next previous track To stop playback press lil STOP Helpful Hints If both JPEG pictures and MP3s are in the same disc you can choose to playback the JPEG pictures or MP3s by selecting Photo or Audio in the menu Only the first session of a multi session CD will be played back Further information on the album track and artist will also be displayed on the TV if this is included in the ID tag This recorder does not support MP3PRO audio format Playing a JPEG image file slide show You can display JPEG pictures in the selected roll automatically one after the other at adjustable intervals Insert a JPEG photo CD CD DVD RW DVD R gt The content menu appears Otherwise press HDD BROWSER and select Disc Tray in the menu Press NEXT P repeatedly until the PHOTO ROLLS and INFO menus appear 01 01 2005 50 Photos OTOALBUM Q Press PLAY to start the slide show playback or press OK to show the thumbnail pictures overview You can edit the displayed photo by pressing EDIT on the remote control to access to Filter and Colour Adjust settings or press the matching colour coded button on the remote control to zoom flip or rotate the photo 200 ORESET ert However the changes cannot be stored
91. he button to make a reverse forward search Stops playback recording 2 Navigation cursor Selects the movement direction in the menu Press the centre knob to confirm selection 3 TUNER Toggles between analogue TV tuner digital TV tuner and digital radio tuner Sockets behind the flap Flip down the door as indicated by the PULL TO OPEN label at the right hand corner DV IN Inputs for digital camcorders using this connector 5 S VIDEO S video input for SVHS Hi8 camcorders or SVHS Hi8 video recorders VIDEO Video input for camcorders or video recorders AUDIO LEFT RIGHT Audio input for camcorders or video recorders Remote Control vm SE EDE CO Cfo orno Gi Elle Ee ms OO Turns the recorder on or to standby mode TV HDD only applicable when using the EXT TO TV I O scart socket to connect your TV Switches to the device that is connected to the EXT2 AUX I O scart socket of this recorder Toggles between the recorder and TV mode if there is no video input signal from EXT2 AUX I O scart socket SELECT DEVICE Selects the active source mode HDD SACD AMP or TV INFO Displays the Time Shift video bar while in tuner mode It shows the timing of the TV programmes stored in the temporary HDD storage Accesses the programme details in the GUIDE Plus system and when viewing
92. hich are transmitted an additional audio language For example if a programme is available in English and Spanish with Spanish being the additional language option Lang 1 Original broadcast language Lang ll Additional audio language Note To make an immediate recording with the optional audio language press SYSTEM on the remote control and access the Toolbar Options then select the language in the AUDIO option With this feature turned on the new recording titles will be automatically protected On Delete and edits on the recorded titles are not possible Off Turn off the function Automatically divides a recording title into chapters by inserting chapter markers at a specific interval This enables you to access a specific point in the recording quickly Off chapter marker is inserted in the recording Standard Chapter markers are inserted automatically during recording at approximately 5 five minutes interval Smart This setting is only available for the DV camcorder recording A chapter marker is inserted whenever there is a break in the recording for example when the recording is stopped or paused and restarted again This feature is only available if you have connected a Satellite Receiver or other devices to the EXT 2 AUX I O scart socket of this recorder see page 41 for more information Off Turn off the function EXT2 Enable this recorder t
93. hoto Albums menu appears Create a new album or select an existing album then press OK to add the photo s to it gt The selected photos are now stored in the album TIPS Press BACK to go back to previous menu item 59 Additional Playback Features continued Edit the album You can re arrange the picture position in the album in order to create the desired slideshow playback order or remove the photo s from the album The order and number of the pictures in the PHOTO ROLLS remains unchanged Insert a JPEG photo CD CD DVD RW DVD R gt The content menu appears Otherwise press HDD BROWSER and select Disc Tray in the menu Press to select the SORTING menu and press V to select PHOTO ALBUMS SORTING PHOTO ROLLS e PHOTO ALBUMS O AIb0001 AIb0002 Alb0003 Alb0004 Press again to access the PHOTO ALBUMS menu and use V keys to select an album To change the album name and date Select the album and press EDIT on the remote control Make the necessary changes on the respective fields and press OK and EDIT to exit the menu To delete the album Select the album and press the Red button on the remote control for DELETE Press OK to show the thumbnail pictures overview Overview OO Alb0001 OREMOVE OMOVE SELECT OROTATE Use 4P A Y keys to select the photo which you wish to move and press the
94. ideo out CVBS Audio left right out Digital audio out coaxial optical Digital audio in coaxial HDMI out G LINK part of GUIDE Plus Mains Front Connections DV input i LINK S Video in Video in CVBS Audio left right in Convenience Programming Timer enhancement Automatic Satellite recording Mon Fri weekly repeat programme Manual timer One Touch Recording VPS PDC recording control ShowView VIDEO Plus R Set Top Box control Programmable events 25 Disc Library Up to 9000 titles and 999 discs Child protection Child Lock Clock Smart Clock Digital Content Management Digital Photo Manager Ease of installation Follow TV Auto install Electronic programming guide GUIDE Plus Power Power supply 198 276V 50 Hz Power consumption 51 W Standby power consumption lt 5 W Cabinet Dimensions WxHxD 435 x 89 x 350 mm Net Weight 7 2 kg Specification and design and subject to change without notice Analogue Sound that has not been turned into numbers Analogue sound varies while digital sound has specific numerical values These sockets send audio through two channels the left and right Aspect ratio The ratio of vertical and horizontal sizes of a displayed image The horizontal vs vertical ratio of conventional TVs is 4 3 and that of wide screens is 16 9 AUDIO OUT sockets Red and white sockets on the back of the
95. imit on chapter markers that can be stored within a title and the hard disk drive TIPS No further recording and editing can be carried out on a finalised DVD R Press BACK to go back to previous menu item Press EDIT to exit the menu 74 Recorder Preferences Press SYSTEM on the remote control gt The system setup menu appears Press to select Preferences and press NEXT P repeatedly to view the available setup options then press V to access 4 Recording DV Specials Sound Disc Access ED Select the setting you wish to change and press NEXT P Once you have changed the setting press OK to confirm and back to the previous selected item gt Instructions and explanations of the options are provided in the following pages gt If the selection in the menu is greyed out that means the feature is not available or cannot be changed in the current state o To exit press SYSTEM Note For Recording see page 38 System Menu Options see page 76 Sound mode see page 76 see page 76 see page 77 Auto resume see page 77 75 System Menu Options continued DV Specials settings Set the date and time for DV camcorder recording update functions Once it has been set the date and time will be updated automatically after a DV camcorder recording 00 00 0000 Use A V keys to set the day month and year press NEXT P to move to th
96. ing system for recorders To use it enter the programming number associated with your television programme You can find this number in your favourite listings magazine GEMSTAR The GUIDE Plus system lists your TV channel programming information You can use it to schedule recordings glance at upcoming programme content or change channels at your external receiver cable box using this recorder s remote control Mam 6 STANDBY ON 5 Turns the recorder on or to standby mode 2 Display panel Shows information about the current status of the recorder 3 PIXEL PLUS Turns on off the pixel plus picture enhancement HDD BROWSER Displays the content browser menu 5 SYSTEM MENU Enters Exits the system setup menu 6 Disc tray OPEN CLOSE Opens or closes the disc tray PAUSE Pauses the playback or recording Press repeatedly to advance a paused picture one frame at a time REC Starts recording the current TV programme or the current video input source Marks the title in the time shift buffer for recording onto the HDD iR Receives the signal from the remote control Point the remote control towards this sensor i2 09 Q m Starts playback of the selected title track I44 gt gt Skips to the previous or next chapter track Hold down t
97. ings Additionally you are able to set a recording here using ShowView VIDEO Plus or Manual See pages 43 44 for more information Pw mua Schedule displays programmes you ve Set to Record ei Press v to use Press the green button for manual recording Press lt to view My TV Press to view Tes L cis scan ER Welcome Note In the UK and Ireland the ShowView system is called VIDEO Plus system and ShowView Programming Number is called PlusCode Programming Number The Info screen is reserved for additional information such as News Weather Reports Stock Quotes etc The information can be broadcast in the same way as the TV listings data and may vary by region em This area is reserved for future services Press to i ditor p N view Schedule Press gt to view Editor x Search Sched Info Welcome do first If there are no categories available no data has been provided yet TIPS Press Blue button to return to the current time in the Grid screen Press GUIDE to exit the menu 32 Using the GUIDE Plus system continued Editor screen The Editor screen is the central location for you to manage your channels Every change in the Editor leads to a change in the Grid You can assign programme numbers to the TV channels switch a channel On or Off and select a channel
98. keys to select a title and press EDIT on the remote control gt The HDD edit menu appears RO P01 28 03 05 12 04 Genre Video edit Select Title name in the menu and press NEXT gt Use A V keys to change the character number or make an entry by using the alphanumeric keypad 0 9 gt Use 4 gt keys to move to the previous or next field To switch between upper and lower case characters press a A on the remote control To clear the title name press the Red button on the remote control for CLEAR Q Press OK to confirm the changes Selecting the genre You may select the genre type provided in the list for easy and fast searching of a recorded title Press HDD BROWSER on the remote control then press NEXT repeatedly until the TITLES and INFO menus appear Use A keys to select a title and press EDIT on the remote control gt The HDD edit menu appears EINEN CONENNIDD Select Genre in the menu and press NEXT gt Use A V keys to select a genre type and press OK to confirm TIPS No editing can be carried out on a protected title see page 54 Press BACK to go back to previous menu item Press EDIT to exit the menu 65 Edit Recordings Hard Disk continued Video editing This recorder allows you to edit the video content after a recording has been made You can insert delete chapter markers or hide unwa
99. lite Receiver Connect the supplied G LINK cable to the G LINK socket on the recorder Place the other end of the G LINK transmitter in front of the Cable Box Satellite Receiver near to the IR sensor remote sensor so that its infrared detector can receive a clear signal gt This will enable the recorder to receive data from the GUIDE Plus system and control the tuner of the external receiver Helpful Hint Ifyour TV is connected to the recorder via the COMPONENT VIDEO Y Pb Pr sockets then connect the external cable box satellite receiver to the EXTI TO TV I O socket TIPS Refer to the respective connected device s user manual for other possible connections 21 Step 2 Optional Connections continued Back of a example only SCARTIN SCART OUT Be cable satellite antenn Connecting to a VCR or other similar device This connection enables you to record from video tape to HDD and allows the VCR to be used for playback on the TV if the recorder is turned off IMPORTANT Your new recorder can replace the VCR for all your recording needs Just unplug all the connections to your VCR Connect the existing Antenna Satellite Receiver Cable TV signal labelled as RF OUT or TO TY to the ANTENNA socket on the recorder Use the supplied Tuner interlink
100. llite Receiver in standby mode for the recording gt You have to turn off the Satellite Receiver to standby mode before the recorder gt The recorder will start recording when it detects a signal from the Satellite Receiver Helpful Hint The recorder s timer recordings take priority over automatic satellite recording Automatic Satellite recording will stop if the recorder s timer recording is due to start TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD see page 38 41 Record to Hard Disk continued About timer recording Timer recording GUIDE Plus system Use the timer recording to automatically start and stop a recording at a later date To schedule a recording with the GUIDE time This recorder will tune to the right Plus system simply select the desired programme channel and begin recording programme from the channel list at the specified time Turn on the TV to the correct With this recorder you can schedule up programme number for the recorder to 25 recordings at a time and up to 6 e g EXT 0 AV six hours for each recording During timer recording changing the recorder s Turn on the recorder and press GUIDE on the remote control channel is not possible Note If the scheduled timer recording is gt The GUIDE Plus screen appears longer than 6 six hour
101. mote E sensor iR on the front NOE panel Select the desired function bud for example M4 1 Open the battery compartment To control other devices Insert two batteries type R06 or AA using this remote control Heft following the indications inside press SELECT DEVICE GO the compartment to select the mode Soo Close th you wish to control for see example SACD TV un gt The selected source mode CAUTION will light up on the LED panel for a few Remove batteries if they are seconds to confirm your selection exhausted or if the remote control is not to be used for a long time Do not mix batteries old and new or carbon and alkaline etc enter the characters Batteries contain chemical substances so they should be disposed of properly AL e CD CD CD C CD CD C5 C C C9 c3 C C3 C2 C2 PHILIPS Press a number button repeatedly until the required character or the number appears To enter language dependent characters press 144 or PPI on the corresponding character e g a press button 2 for a and then press FR until appears To enter special symbols press button 1 repeatedly To select upper lower case capital small letters press a A To enter a space press button 1 Remote Control continued Note Y
102. mote control see next page Skip search Disc tray will not open until setup is completed 17 After the channel search is finished the number of found and stored channels analogue TV digital TV and digital radio Wait until the recorder has finished appear press OK to continue initialising the system then press OK to exit Analogue TV channels found XX gt a Digital TV channels found XX You may now enjoy using this Digital Radio channels found XX recorder Check signal Restart Search O Helpful Hint The TV programme listings do not appear on the GUIDE Plus system as soon as you complete the basic installation It may take up to 24 hours to receive TV listings data gt TIPS After completing the basic installation you can change or update your settings using the system setup menu see page 78 86 27 Step 4 Set up the GUIDE Plus system Your recorder is equipped with the GUIDE Plus system This system offers a free interactive programme guide that lists all the TV programmes available in your area Before you can enjoy this feature you have to define your geographic location and your current setup devices in order to receive correct GUIDE Plus TV listing data IMPORTANT To use the GUIDE Plus system the analogue tuner has to be installed properly If an introduction to the GUIDE Plus system appears on the TV read the contents and press OK to continue
103. n the remote control for SEARCH once you have found the correct frequency channel press the Green button for STORE Use the alphanumeric keypad 0 9 to enter the preset channel number for the channel to store e g 01 press OK and the Green button for STORE Use the alphanumeric keypad 0 9 to enter the preset channel name press OK and the Green button for STORE All channels can have a name of up to four characters If the current TV channel is transmitted by coded TV signals that can only be viewed properly with a decoder which is connected to the EXT2 AUX I O socket you need to activate the connected decoder Select this to allocate the connected decoder to this TV channel Off Turn off the decoder feature Set the TV system that produces the least distortion of picture and sound See last page TV System Guide for more information NICAM is a digital sound transmission system It can transmit either one stereo channel or two separate mono channels Improve the sound transmission of the TV channel Off Select this if the reception is poor and the sound is distorted Select this to fine tune the TV channel manually if the reception is poor Use lt gt keys to adjust the frequency and press OK to confirm System Menu Options continued Digital Channel settings Video Radio Fav Sort Video Radio Updt Install Full Install Check Sign
104. negative consequences for the environment and human health Entsorgung Ihres Altger tes Deutsch Ihr Produkt ist aus hochqualitativen Materialien und Bestandteilen hergestellt die dem Recycling zugef hrt und wiederverwertet werden k nnen Falls dieses Symbol eines durchgestrichenen M llcontainers auf Rollen auf diesem Produkt angebracht ist bedeutet dies dass es von der Europ ischen mmm Richtlinie 2002 96 EG erfasst wird Bitte informieren Sie sich ber die rtlichen Sammelstellen f r Elektroprodukte und elektronische Ger te Bitte beachten Sie die lokalen Vorschriften und entsorgen Sie Ihre Altger te nicht mit dem normalen Haushaltsm ll Die korrekte Entsorgung Ihres Altger tes ist ein Beitrag zur Vermeidung m glicher negativer Folgen f r die Umwelt und die menschliche Gesundhei LASER Semiconductor laser InGaAIP DVD AlGaAs CD 658 nm DVD 790 nm CD 30 mW DVD RW write 1 0 mW DVD read 1 0 mW CD read 84 degrees DVD 61 degrees CD Wave length Output Power Beam divergence CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER PLEASE
105. nnsnnnnssnnnsnsnnnnnsnnnnsnnnssnnnsnnnnen 8 Setup precautions Cleaning discs Hard Disk Drive HDD handling care Product Information Introduction Accessories supplied Region codes Special features Product Overview Main IO Remote Control Using the remote control sess Controlling TV with the recorder s remote contro Step l Basic Recorder Connections eee 16 20 Connecting the antenna cables Connecting the video cable Connecting EE E 20 Step 2 Optional 5 21 25 Connecting to a Cable Box or Satellite Receiver 21 Connecting to a VCR or other similar device 22 Connecting to a VCR and Cable Box Satellite Receiver 23 Connecting to a camcorder Connecting the digital input for 5 channel recording Step 3 Installation and Set up Step 4 Set up the GUIDE Plus GUIDE Plus Using the GUIDE Plus system GUIDE Plus system introduction Quick access functions GUIDE Plus menu bar Watch TV Control TV Programmes zuusssonsesonsennnsnsnnsnnnnsennnsnnnnsnnnnsnnnnnnsnonnnnnnssnnnnsnsnnnansnnnnsnnsnnnne Switching on to TV programme Pause live TV function Instant replay function FlexTime function Watching digital TV radio broadcast Viewing digital text service MHEG Before
106. not available for external ENCENEET HNNTLUN Scheu receiver Record Schedule Freq Timing TTT da CYUETES Frequency ONCE gt Timing 0 Recordings set 1 25 VPS PDC set 0 25 o Use lt gt A Y keys or alphanumeric Karen RENTES x 21 May 18 42 02 25 P01 keypad 0 9 to enter the recording information date start time end time and press the Green button to confirm each entry and go to the next parameter Press TIMER to confirm and exit the When TUNER 01 appears on the gt The TIMER icon will light up on the display select the input source and enter j MER NE display panel if a timer recording is set the programme channel gt To select an external input channel gt If the recorder is not in standby mode highlight TUNER in the menu and GE notification message will appear before keys to select Digital Tuner the timer recording begins EXTI EXT2 or gt If you ignore the warning the recorder will automatically switch to the respective channel and start recording gt To select a programme number highlight Ol in the menu and use the alphanumeric keypad 0 9 to enter the programme channel TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD see page 38 44 Record to Hard Disk continued
107. nt to enjoy the multi channel audio output through your HDMI connection Disable Select this if the connected device is not able to output the sound through the HDMI connection or the playback audio format is not supported by HDMI connection e g projector SACD Note Make sure that you have alternative audio connection from the recorder to your TV or the display device for the sound output see page 20 Helpful Hint It is not possible to listen to SACDs or copy controlled DVD Audio CPPM Content Protection for Playable Media sources using the HDMI connection System Menu Options continued Audio Input settings underlined options are the factory default settings PCM Encoding Select this if the connected device is not capable of decoding multi channel audio The system will convert the Dolby Digital and MPEG 2 multi channel signals to PCM Pulse Code Modulation On Select this to enable the PCM All audio signals are downmixed to linear PCM 2 channel Off Select this to disable the PCM Language settings Select the menu language for this recorder s on screen display This setting will be taken from the basic installation Select the preferred audio language for DVD playback and Digital Terrestrial Tuner DTT reception Subtitle Select the preferred subtitle language for DVD playback and Digital Terrestrial Tuner DTT reception Subtitle type Digital Terrestrial Tuner DTT reception may ca
108. nted scenes When you play back a recording in video edit mode the entire recording will be played back including the hidden scenes e EL HDD BROWSER EDIT Press HDD BROWSER on the remote control then press NEXT E repeatedly until the TITLES and INFO menus appear Use A keys to select a title and press EDIT on the remote control gt The HDD edit menu appears Title name Genre Select Video edit in the menu and press NEXT gt gt Playback will start automatically Video bar In the video bar the record playback head represents the actual position of the playback Press the matching colour coded buttons on the remote control to access the options displayed at the bottom of the menu NO CHAPTER Red button Select this to erase all the chapter markers in the current title CHAPTER Green button Select this to access chapter editing menu MERGE combine two chapters BACK return to the previous screen SPLIT insert a chapter marker DIVIDE Yellow button Select this to divide the recording into two separate titles HIDE STOP HIDE Blue and Green buttons Select this to define the scene to hide SHOW STOP SHOW Blue and Green buttons Select this to make the hidden scene visible To exit press EDIT gt In addition to the original on edi
109. o start and stop recording when a signal is received from the connected device With this feature you can immediately record the programme that you are viewing on the TV by pressing REC button without needing to turn on this recorder see page 41 for more information On Enable recording directly from the TV display Off Turn off the function This setting is only required if you are using the recorder s COAXIAL IN socket to connect to the coaxial output on your Cable Box or Satellite Receiver Enable 5 1 recording from the cable box or satellite receiver you have connected Off Disable the digital audio input IMPORTANT Unrecordable contents Contents with copy protection cannot be recorded on this recorder When the recorder receives a copy guard signal it will continue to record However during playback only blank or grey picture will be displayed Recording TV programmes Follow the instructions below to record the TV programmes onto the HDD where you can store for future viewing and copy to a recordable DVD disc if required INFO G4 lt gt av T gt PLAY PHILIPS Sm Record the current TV programme Press INFO on the remote control to display the Time Shift video bar Press RECORD on the remote control gt The current programme will be marked for recording gt In the countries where no GUID
110. o the HDD or a recordable DVD see page 38 45 Record to Hard Disk or recordable DVD Recording from a DV Camcorder When you connect a DV camcorder to the DV IN socket of this recorder you can control both the camcorder and this recorder using the recorder s remote control Furthermore the smart chaptering feature ensures the chapter markers are created at each break in the images Before you start Mark the contents in the temporary HDD storage time shift buffer for which you wish to record to the HDD see page 36 Otherwise all the contents will be cleared when you start camcorder recording Set the date and time at DV Specials if required for DV update recording function see page 76 TUNER ee s PHILIPS er Connect your Digital Video or Digital 8 camcorder to the DV IN socket of this recorder see page 24 Turn on the TV to the correct programme number for the recorder e g EST 0 AV Press CAM on the remote control gt Media type selection screen appears Switching to camera mode will clear the Time Shift Buffer Select media type to record gt Recordable DVD Cancel To continue select to record to Hard Disk or Recordable DVD in the menu and press OK to confirm gt All the contents in the temporary HDD storage will be cleared only the marked contents will be stored onto the HDD Otherwis
111. options Press repeatedly until the language you want is selected then press to confirm gt The languages may be numbered or abbreviated such as for English Changing audio soundtrack language This operation works only on DVDs with multiple soundtrack language or VCDs with multiple audio channel or DVD R RW recorded with 5 1 multi channel This function can also be accessed via the Red button on the remote control while in disc playback mode Press to select Audio and press NEXT P to enter its options Press V repeatedly until the audio language or soundtrack Audio or 2 you want is selected then press to confirm gt The languages may be numbered or abbreviated such as En for English gt Audio option is for 5 1 output and Audio 2 is for output according to how the soundtrack was encoded TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 63 Additional Playback Features continued This option is only available with DVDs This option allows you to skip to a that contain sequences recorded from specific point in the current disc different camera angles This allows you to view the picture from different angles Press V to select Time search and press NEXT P to enter the time field Press V to select Angle and press hours minutes s
112. ou must be in the TV mode to Controlling TV with the perform above operations If not press recorder s remote control SELECT DEVICE to select TV mode Additional control functions for most of the Philips TV This DVD recorder s remote control has a universal TV control function that enables you to control the basic functions ME Ser Ha TXT urns on off clock display of your TV Power Volume arid Channel BACK Returns to the previous menu step Control regardless of the TV s brand SYSTEM Calls up the system menu from the TV AVYV4 Navigation keys in the TV menu TUNER Switches to TV internal tuner mode Helpful Hints Depending on the connected unit you may not able to control your TV or other devices with some or all of the buttons mentioned above When the batteries of the remote control are removed the code setting will be retained for 5 five minutes during batteries Hold down digit keys 1 and 3 replacement After five minutes without together until the TV LED blinks twice batteries the remote control will reset to its default settings Within 10 seconds enter digit key 0 followed by the remote control s three Using the DVDR9000H remote digit command code number see last page control together with the Philips of this manual based on your TV s brand Cineos DVP9000S and DFR9000 If the code entered is valid the TV The main functions of the DVP9000S and LED
113. ound in your local TV listings magazine 20 May 16 47 Showview Manual Home 5 displays programmes you ve Set to Record Put Press to use Press the green button for manual wem i recording Press 4 to view My TV Press gt to view ad E Info BM amm m KE 2 VPS PDC V P function that is used to control the start and duration of TV channel recording not valid for HDD DVD Recorder in Asia Pacific amp Middle Eastern countries 20 May 1647 Frequency ONCE Timing 0 Recordings set 1 25 VPS PDC set 0 25 Record Schedule DVD Recorder Hard Disk DVDR9000H User Manual 6 Benutzerhandbuch 100 Thank you for choosing Philips Need help fast Read your Quick Use Start Guide and or User Manual first for quick tips that make using your Philips product more enjoyable If you have read your instructions and still need assistance you may access our online help at www philips com support GEMSTAR SHOWVIEW VIDEO PHILIPS Important notes for users in the U K Mains plug This apparatus is fitted with an approved 13 Amp plug To change a fuse in this type of plug proceed as follows Remove fuse cover and fuse Fix new fuse which should be a BS1362 5 Amp ASTA or BSI approved type Refit the fuse cover f the fitted plug is not suitable for your socket outlets it should be cut off and an appropriate plug fit
114. ource Helpful Hint It is not possible to record from this recorder to your camcorder via the DV IN socket on your recorder S VIDEO VIDEO AUDIO OUT OUT OUT Option 2 Using the S VIDEO In or VIDEO In socket Use the S VIDEO connection if you have a Hi8 or S VHS C camcorder It provides very good picture quality Alternatively you can use VIDEO connection if your camcorder has only a single video output Composite Video CVBS It provides good picture quality Connect the S VIDEO or VIDEO socket at the front panel of the recorder to the corresponding S VHS or Video output socket on the camcorder gt Press CAM on the remote control then press CH repeatedly to select CAMI when using this input source Use an audio cable red white not supplied to connect the AUDIO LEFT RIGHT sockets at the front panel of the recorder to the audio output socket on the camcorder Helpful Hint If you connect your camcorder to the scart socket at the rear of this recorder select EXTI or EXT2 as the input source TIPS Refer to the respective connected device s user manual for other possible connections Step 2 Optional Connections continued Back of a Satellite Box example only AUDIO our en cet O gt mm AO IGITAL OUT HOME OUT el Before you start the 5 1
115. own M4 gt i keys or use 4 gt lt Title gt keys on the remote control to search for Chapter 1 Chapter 2 Chapter 3 Chapter 4 the scene you want to edit then press H PAUSE Chapter 1 Chapter 3 Chapter 4 Press the matching colour coded buttons on the remote control to access the options displayed at the bottom of the menu Helpful Hint There is a limit on chapter markers that can be stored within a title and on the hard disk drive for example chapter 2 is being selected TIPS No editing can be carried out on a protected title see page 54 Press BACK to go back to previous menu item Press EDIT to exit the menu 67 Edit Recordings Hard Disk continued You can divide a title into two or more You can choose to hide certain scenes titles You can use this function to for playback e g skipping a commercial separate and delete undesired portions of scene or make the hidden scene visible a recording such as commercials again WARNING During HDD recording playback press Once a title has been divided it EDIT on the remote control cannot De reyersed Hold down 44 P keys or use amp gt keys on the remote control to search for the scene you want to edit then press H PAUSE Press the Blue button on the remote control for HIDE gt It will set the start marker for hide During HDD recording playback press EDIT on the
116. planations of the options are provided in the following pages gt If the selection in the menu is greyed out that means the feature is not available or cannot be changed in the current state o To exit press SYSTEM see page 86 see page 86 78 System Menu Options continued System settings underlined options are the factory default settings Second RC Display Tray light Version Info On Enable control of this recorder with a second remote control not supplied Off Disable second RC control function Select the level of On screen display information Full Complete information is always displayed during use Reduced The help text and colour button bar will be removed from the display Normal The help text will be removed from the menu Select the brightness of the recorder display panel Bright Normal brightness Dimmed Medium brightness Off Turn off the display Select to turn on or off the recorder s tray light which is located at the centre of the recorder Off Turn off the tray light On Turn on the tray light Play Back Control feature is only applicable for VCD SVCD only It allows you to play Video CDs 2 0 interactively following the menu on the display Off The VCD SVCD will skip the index menu and playback directly from the beginning On The index menu if available will appear on
117. ption 2 Connecting to the analogue and terrestrial antennas Connect the existing Antenna Satellite Receiver Cable TV signal labelled as RF OUT or TO TV to the socket on the recorder Connect the digital terrestrial antenna to the ANTENNA socket on the recorder Use the supplied RF coaxial cable to connect the TV socket on the recorder to the antenna input socket or labelled as VHF UHF RF IN on your TV Helpful Hints The integrated DVB tuner allows you to receive digital terrestrial TV channels that will preserve the high picture quality see page 89 for more information Only free to air digital TV channels can be received no reception of condition access Smartcard channels TIPS Before making or changing any connections make sure that all the devices are disconnected from the power outlet Step I Basic Recorder Connections continued Weer HOM OUT Option 1 Connecting the video cable This connection enables you to view the playback from this recorder You only need to choose one of the options below to make your video connection Fora standard TV follow option 1 2 or 3 Fora progressive scan TV follow option 4 Fora HDMI TV follow option 5 Option Using the Scart socket Use the scart cable to connect the EXTI TO TV I O socket on the recorder to the corresponding SCART input socket on the TV gt If your
118. r Provide a very fine shade of colour This is the standard setting for HDMI compatible devices System Menu Options continued Video Output settings underlined options are the factory default settings Noise red reduction Sharpness Video settings for Pixel Plus only Use lt gt keys to set the level of noise reduction and press OK to confirm the setting Use 4 gt keys to adjust the level of picture sharpness and press OK to confirm the setting Note The above two options are not visible unless the Pixel Plus feature is turned on Audio Output settings underlined options are the factory default settings Digital output This setting is only required if you are using the recorder s COAXIAL OPTICAL OUT socket to connect other audio video device All Select this if the connected device has a built in Multi Channel decoder that supports one of the multi channel audio format Dolby Digital MPEG 2 PCM Select this if the connected device is not capable of decoding multi channel audio The system will convert the Dolby Digital and MPEG 2 multi channel signals to PCM Pulse Code Modulation Select this to deactivate the digital audio output For example if you use the AUDIO OUT sockets to connect this recorder to a TV or Stereo system This setting is only required if you are using the recorder s HDMI OUT socket to connect your TV or other display device Auto Select this if you wa
119. r BUSY Wait until this message disappears The recorder is busy processing an operation 99
120. recorder to record your favourite TV programmes Furthermore you can take advantage of features like FlexTime Instant Replay or Pause Live TV see page 35 for more information Before you can start using this recorder you must complete the basic connection and set up in four easy steps Step Basic recorder connections pages 16 20 Step 2 Optional connections for other devices pages 21 25 Step 3 Basic installation and set up pages 26 27 Step 4 GUIDE Plus set up pages 28 29 Please take time to read this user manual before using your recorder It contains important information and notes regarding operation of the DVD recorder Product Information Helpful Hints If you have questions or if problems occur during operation see the chapter Troubleshooting If you need further assistance please call the customer support service for your country The corresponding telephone numbers and e mail addresses are given in the guarantee booklet Refer to the type plate at the rear or bottom of the product for identification and supply ratings Accessories supplied Quick Start Guide RF coaxial cable Scart cable G LINK transmitter Tuner interlink cable Remote control and batteries Power cable Region codes DVD films are usually not released at the same time in all regions of the world thus all DVD players recorders are keyed to a specific region code
121. recording is only possible in from the Cable Box Satellite Receiver can HQ and SP recording mode be recorded onto this recorder along withthe vid o 5 I channel recording is only possible in EXT 2 input source which is accessed using the CAM button TIPS Before recording you have to turn on the 5 1 Recording in the Recording setup menu see page 38 25 Step 3 Installation and Set up The basic installation menu will appear the very first time you turn on this recorder These settings will help you set up the basic recorder features easily including TV programme installation language settings and the GUIDE Plus system IMPORTANT Complete the basic installation settings before inserting a disc for playback or recording The disc tray will not open until the basic setup is completed Press STANDBY ON to turn on the recorder Turn on the TV to the correct programme number for the recorder e g EXT 0 AV gt You may go to Channel on your TV then press the Channel down button on your TV s remote control until you see CINEMA LINK or LANGUAGE AND COUNTRY menu appears on the TV f your TV has Cinema Link or a similar feature downloading of the TV channels analogue only will start automatically As the TV channels information is downloaded from your TV settings step 5 will be skipped CIMEMA LINK Loading data from TV OR If Language and
122. remote control Hold down M4 gt gt I keys or use lt gt keys on the remote control to search for the scene you want to edit then press II PAUSE OSTOPHIDE CANCEL Press the Yellow button on the remote control for DIVIDE Hold down Epi key on the remote gt A new title and new index picture will control to search for the end of the be created from the current point of scene to hide then press the Green playback button for STOP HIDE gt It will set the end marker for hide s gt The hidden area will be marked in Titel Title2 Title 3 blue Otherwise cancel the operation by pressing the Blue button on the remote control for CANCEL j o To exit press EDIT for example title is being selected TIPS No editing can be carried out on a protected title see page 54 Press BACK to go back to previous menu item Press EDIT to exit the menu 68 Edit Recordings Hard Disk continued Showing the hidden scene During HDD recording playback press EDIT on the remote control gt While in video editing mode the hidden chapter will play Hidden scenes OSTOP SHOW CANCEL Press the Blue button on the remote control for SHOW it will mark the beginning of scene to show Hold down ER key on the remote control to search for the end of the scene to show then press the Green button for STOP SHOW Other
123. risk that you can no longer play the disc on other DVD players after the following procedure Therefore apply this function with particular care 93 Troubleshooting continued The message Insert recordable disc appears The message Collision appears Recordings are not occurring as scheduled New recordings cannot be made The wrong TV channel was decoded recorded after you programmed a recording using the ShowView VIDEO Plus system The index screen flickers when a DVD R is inserted Picture is fuzzy and brightness varies when played back your recording The DVD RW RW cannot be used for recording on this recorder 94 Problem Recording Solution Either no disc was inserted or the disc that was inserted cannot be used for recordings Insert a recordable DVD DVD R DVD RW or DVD R Double Layer The timer recording overlaps with another timer recording If you ignore this warning the programmed recording with the earlier start time will start first Change the information for one of the two recordings Delete one of the two recordings The TV channel you want to record is not stored or you selected the wrong programme number Check the TV channels stored You must reset the timer recording after adjusting the clock setting You cannot use the recorder to duplicate copyright material DVDs or videotapes onto a recordable DVD COPY PROTECTED will be displayed VPS
124. rocess can take up to two 2 hours You can stop the download at any time by turning the device on Visit www europe guideplus com En help countries hostchannels html for more and latest information on the supporting host channels Country City Host Channel Host Channel Language aerial cable SAT Deutschland Eurosport Eurosport Astra1 19 2E sterreich Eurosport Eurosport Astra1 19 2E Hotbird 13 0E Schweiz Deutsch Eurosport Eurosport Astra1 19 2E United Kingdom ITV British Eurosport Astra2 28 2E France Canal Espana Tele 5 Nederland TMF Eurosport TMF Astra1 19 2E Hotbird 13 0E Eindhoven TMF TMF Astra1 19 2E Rotterdam TMF TMF Astra1 19 2 Amsterdam TMF TMF Astra1 19 2 Belgi Vlaanderen TMF Italia Sport Italia Check your TV listings line up on the Editor screen the next day to ensure the data download is completed see page 33 Helpful Hints If your country region is not in the list above or you are not able to receive TV listings data you can still use the GUIDE Plus system for ShowView VIDEO Plus and manual recordings If a problem comes up during the GUIDE Plus system set up please visit the website at www europe guideplus com for further assistance TIPS After completing the setup leave the recorder in standby mode and turn on your external receivers overnight to receive the TV listing data 29 Using the GUIDE Plus system
125. rry multiple subtitle types Select the subtitle type you want to be shown Off No subtitles are displayed on the screen Normal Normal subtitles are shown Hard of hearing Display special subtitles For example descriptions for sound and action Helpful Hints If the selected audio subtitle language is not available on the disc the deck default language will be used instead For some DVDs the subtitle audio language can only be changed via the DVD disc menu Setting up Progressive Scan feature for Progressive Scan TV only The progressive scan displays twice the number of frames per second than interlaced scanning ordinary normal TV system With nearly double the number of lines progressive scan offers higher picture resolution and quality Before you start Ensure that you have connected this recorder to a progressive scan TV using the Y Pb Pr connection see page 19 Ensure that you have completed the basic installation and set up Turn on the TV to the correct programme number for the recorder e g EXT 0 AV Turn on the recorder and press SYSTEM on the remote control gt The system setup menu appears Press to select Setup and press NEXT P to select Video output gt A warning message appears Press OK to continue Video output Press V to highlight Progressive and press NEXT to access Press V to sele
126. rs Otherwise press HDD BROWSER and select Disc Tray in the menu then press NEXT P gt Use A V keys to select a title from the menu 00 22 08 SPP BS 14 01 03 01 20 00 SPP 21 02 03 3E 00 32 02 Kl SPP P 28 06 03 OPROTECT Static lights The island of lost dream O Lord of the Rings The T Habla Con Ella The Ring Press the Red button on the remote control for DELETE A warning message appears Press OK on the remote control to proceed gt For DVD RW disc Empty Title will appear in the Index Picture screen where the title was deleted The empty space can be used for new recordings gt For DVDER disc Deleted title will appear in the Index Picture screen where the title was deleted During playback the deleted title will be skipped Otherwise select Cancel in the menu and press OK to abort the operation Protecting the recorded titles DVDRW You can choose to protect the recorded title on a DVD RW in order to prevent the recordings from being accidentally erased or edited Insert a recorded DVD RW into the recorder gt The Index Picture screen appears Otherwise press HDD BROWSER and select Disc Tray in the menu then press NEXT P Use A V keys to select a title from the menu Press the Blue button on the remote control for PROTECT Once the title has been protected the Blue button option will change
127. s it will split into two or more titles sue 3y the Sea Presented Hallet Stevie McCullum s dad used to drive the family down eg from Glagow for their summer holidays in north 03 in There are three ways to N Blech Jed 1 16 00 programme a timer recording Using the GUIDE Plus system Using the ShowView VIDEO Plus system Using manual timer recording 9 Note If the GUIDE Plus setup menu ud appears it means that this recorder has GUIDE 8 OK not been installed with the GUIDE Plus lt Ji programme data yet See pages 28 29 to oe set up the GUIDE Plus system CH Use A Y keys to select a desired TV ooo channel and use lt P keys to select a SOS TIMER programme BOA ua poi Press CH er to scroll down up a mas page at a time Press 144 to go directly to a day before or the next day TV listings About VPS PDC VPS Video Programming System or Press the Red button on the remote PDC Programme Delivery Control is control for used to control the start and duration of Press GUIDE to exit the menu TV channel recordings If a TV programme starts earlier or ends later than was scheduled this recorder will then turn on and off at the correct time TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a
128. s on the display 4 Wait until the recorder s demo start scrolling on the display press STANDBY ON again to turn on the recorder All the information stored in the memory programmes time will be cleared The first basic installation menu will be displayed on the TV Aim the remote control directly at the sensor on the front of this recorder not towards TV If the recorder receives a signal from the remote control the icon Olt will appear on the display Remove any obstacles between this recorder and the remote control Batteries are weak replace the batteries The remote control s manufacturer code returned to the default setting when you replaced the batteries Reset the code page 15 Press SELECT DEVICE to select the correct mode Turn on your TV and set to the correct Video In channel for the recorder You may go to Channel on your TV then press the channel down button on your TV s remote control until you see the TV programme Check the video connection between this recorder and the TV It may be due to the recorder s video output setting not being matched to the video connection You can reset the recorder as below 1 Disconnect the recorder s MAINS from the power supply 2 Hold down 14 on the recorder whilst reconnecting its MAINS to the power supply 91 Troubleshooting continued Problem General No sound No TV signal received from the recorder The message Disc contains unkno
129. s the type of video output that matches the video connection between this recorder and your TV RGBeCVBS For RGB or CVBS connection S Video For S Video connection Before enabling the progressive scan feature you must ensure that your TV can accept progressive signals a progressive scan TV is required and you have connected the recorder to your TV using the Y Pb Pr see page 19 On Turn on progressive scan mode Off Disable the progressive scan mode Note The progressive video output will be disabled if the HDMI output is turned on Video settings for HDMI connection only This feature is only applicable for HDMI connection see page 19 Auto Turn on the HDMI output The video output resolution will automatically follow the video signal received Turn on the HDMI output The video output resolution will follow the setting at Video upscalling Set the video resolution depending on the capability of the connected TV device 480p 576p 720p 1080i i denotes interlace and denotes progressive Note This setting is not available if the HDMI setting is set to Auto Changing the video upscalling will normally cause the TV to blank out for a few seconds as it adjusts to the new setting Resolutions not supported by the television will be greyed out This setting determines the video output colour format RGB Give brighter colours and a deeper black YPbP
130. space for new recordings Deletion of title has to be done manually Protected Lists the titles by protected against deletion Genre Lists the titles by the genre you have specified Last Played Lists the titles by the sequence of titles last played TIPS Press HDD BROWSER to exit the menu options displayed at the bottom of the menu DELETE Red button Delete the selected title from the hard disk COPY Green button Copy the selected title from the hard disk to a recordable DVD CHILDLOCK CHLD UNLCK Yellow button Lock or unlock the selected title from viewing A four digit pin code is required to play the locked disc title or to unlock the disc title see page 77 PROTECT UNPROTECT Blue button Protect or unprotect the title against editing or accidental loss of recordings Playable discs Using this recorder you can play and record on the following discs Recording and Playback DVD RW DVD Rewritable can be recorded on over and over and can only be played back when the recording was made in DVD ReWritable video mode DVDER DVD Recordable once the disc is full or finalised you cannot record any more on the disc It can only be played back when the recording was made in video mode and finalised DVD R DL DVD R Double Layer same as DVDR Playback only DVD Vi
131. t press TUNER Turn on the TV to the correct Helpful Hint programme number for the recorder If X appears at the bottom of the TV e g EXT 0 AV screen it means that there is no video signal Turn the recorder and press CAM received from the current input channel on the remote control gt Media type selection screen appears TIPS Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD see page 38 49 Copy from Hard Disk to recordable DVD IMPORTANT It is not possible to record the TV programmes or the scheduled timer programmes directly to a recordable DVD You can only record it to the HDD and then copy to a recordable DVD Copy protected Copy Once or Copy Never movies and DVD Videos cannot be copied to the HDD About copying You can copy a recorded title from the HDD hard disk drive to a recordable DVD The time required for copying from HDD to a recordable DVD depends on the recording mode of the HDD recordings It is not possible to change the recording mode for the copying process It is therefore important that you choose the appropriate recording mode when you set up the recording to the HDD The copying process is done at a higher speed than the recording The maximum copying speed is up to 2x You cannot shorten the time required for recording even with high speed
132. talling the recorder Press SYSTEM on the remote control Select Setup in the menu and press NEXT P repeatedly to select Analogue Ch ress repeatedly to select the following settings in the menu an P V repeatedly he foll g g h d press NEXT to enter its options Press OK on the remote control to start the automatic TV channel search process and replace all previously stored analogue TV channels This process may take several minutes This feature is only available if you have connected this recorder to your TV using the EXTI TO TV I O scart socket It allows you to change the order of the TV channels analogue only stored in your recorder to matc the order on the TV I Press OK to confirm the message on the TV TV Ol will appear on the display panel Use the TV s remote control to select programme number 1 at your TV then press OK on the recorder s remote control f the recorder finds the same TV channel as on the TV it stores it as POI TV 02 will then appear on the display panel f no video signal is received from the TV NO TV will appear Use the TV s remote control to select programme number 2 at your TV then press OK on the recorder s remote control Repeat the above steps until you have assigned all the TV channels According to your preference you can change the order of the stored TV channels 001 004 TELET 004 CHAN 002 005 CHAN 005 RTL4 004 Use V keys to s
133. te recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD see page 38 43 Record to Hard Disk continued Press the Green button to confirm and go to the next parameter gt A virtual keyboard appears on the TV Turn on the TV to the correct for entering the title name programme number for the recorder e g EXT 0 AV Timer recording manually Once complete store the setting by pressing the Green button for ez Turn on the recorder and press TIMER gt The scheduled manual recording will on the remote control be displayed gt The GUIDE Plus schedule screen The default recording settings are displayed in the pink tile To make changes press the matching colour coded appears Mrs E button on the remote control gt recording Press 4 to ven TV Press b to view er een un st Frequency Press the Red button on the remote control repeatedly to select the repeat recording setting Once Weekly M F Monday to Friday e Press the Green button on the remote D Timing control for Press the Green button on the remote gt The recording date appears control repeatedly to select adding extra time 0 10 20 30 to the end of recording or pem emer nern EE select VPS PDC V P function button to n H pour Note VPS PDC is
134. ted in its place f the mains plug contains a fuse this should have a value of 5 Amp If a plug without a fuse is used the fuse at the distribution board should not be greater than 5 Amp Note The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere How to connect a plug The wires in the mains lead are coloured with the following code blue neutral N brown live L As these colours may not correspond with the colour markings identifying the terminals in your plug proceed as follows Connect the blue wire to the terminal marked N or coloured black Connect the brown wire to the terminal marked L or coloured red Do not connect either wire to the earth erminal in the plug marked E or or coloured green or green and yellow Before replacing the plug cover make certain hat the cord grip is clamped over the sheath of the lead not simply over the two wires Copyright in the U K Recording and playback of material may require consent See Copyright Act 1956 and The Performer s Protection Acts 1958 to 1972 Italia DICHIARAZIONE DI CONFORMITA Si dichiara che l apparecchio DVDR9000H Philips risponde alle prescrizioni dell art 2 comma del 28 Agosto 1995 n 548 Fatto a Eindhoven Philips Consumer Electronics Philips Glaslaan 2 5616 JB Eindhoven The Netherlands Norge Typeskilt finnes p
135. ted title will be appeared with symbol Helpful Hint You can delete the edited title without deleting the original title However if the original title is being deleted the edited title will also be deleted TIPS No editing can be carried out on a protected title see page 54 Press BACK to go back to previous menu item Press EDIT to exit the menu Edit Recordings Hard Disk continued Merge split a specific chapter MERGE j within a recording Select this to merge the current chapter with the chapter before it gt If the chapter before it was a hidden chapter then the joined chapter will also be hidden You can create a chapter by inserting chapter marker using the SPLIT option or remove a chapter marker using the MERGE option Title During HDD recording playback press EDIT on the remote control Chapter 1 Chapter H Chapter 3 Chapter 4 4 Press the Green button on the remote Chapter 1 Chapter 2 Chapter 3 control for CHAPTER gt The chapter editing menu appears for example chapter 2 is being selected BACK Select this to return to the previous screen SPLIT Select this to insert a new chapter marker at the current point of playback This will allow you to access a specific point in the recording easily or set a chapter you wish to hide for example commercial scenes OMERGE O BACK Gab Hold d
136. teilylle Oikeus muutoksiin varataan Laite ei saa olla alttiina tippu ja roiskevedelle Huom Toiminnanvalitsin on kytketty toisiopuolelle eik se kytke laitetta irti s hk verkosta Sis nrakennettu verkko osa on kytkettyn s hk verkkoon aina silloin kun pistoke on pistorasiassa CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG USYNLIG LASERSTR LING VED BNING UNDG UDS ETTELSE FOR STR LING VARNING SYNLIG OCH OSYNLIG LASERSTR LNING N R DENNA DEL AR PPNAD BETRAKTA EJ STR LEN VARO AVATTAESSA OLET ALTTIINA N KYV LLE JA NAKYMATTOMALLE LASER S TEILYLLE L KATSO S TEESEEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GE FFNET NICHT DEM STRAHL AUSSETZEN ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential
137. the TV this means that the child lock parental control was activated for the inserted disc You have to enter your four digit pin code see page 77 For more playback features see pages 59 64 TIPS Some discs cannot be played on this DVD recorder due to the configuration and characteristics of the disc or due to the condition of recording and authoring software that was used 55 Playback from Disc continued Playing a DVD video disc Normally the DVD disc contains a disc menu You may have to make your selection e g subtitle or audio language within the disc menu Insert aDVD f the disc menu appears use the alphanumeric keypad 0 9 to input your selection or use keys to select a play option and press OK to confirm To access the disc menu Press HDD BROWSER on the remote control highlight Disc Tray and press the Green button on the remote control for DISC MENU OR During playback press the HDD BROWSER once gt Pressing the button again will return to the content menu To select the previous or next chapter title During playback press on the remote control to select TITLE or CHAPTER then press 144 P l To stop playback press lil STOP Playing a Super Video CDs Super Video CDs may feature PBC Play Back Control This allows you to play the video CDs interactively following the menu on the display Insert a Super
138. title or chapter as Pausing playback 1 slow follows motion play During playback Press to go to the next title chapter During playback press PAUSE to track pause playback and display a still picture Press 144 to return to the start of the Hold down 144 reverse or P forward current title chapter track Pressing 44 until the slow motion status bar 1 8X twice can return to the start of the or 1 8X appears on the TV previous title chapter track gt The sound will be muted OR Press the 44 reverse or ER forward repeatedly to cycle through the different slow motion speed 1 8X 1 4X 1 2X 1 8 1 4 1 2 Use the alphanumeric keypad 0 9 to input the title chapter track number OR To resume normal playback press Press T C on the remote control to gt PLAY select T title or C chapter then press M4 gt gt to select the title chapter number TIPS The operating features described here might not be possible for certain discs Always refer to the instructions supplied with the discs 6l Additional Playback Features continued During playback you can press SYSTEM on the remote control to display the available playback options These options can be selected by pressing the matching colour coded buttons on the remote control OSHUFFLE REPEAT Scan disc for CD VCD DVD R RW disc only This function allo
139. to UNPROTECT Select this to cancel the protect setting if required ODELETE ia gt O UNPROTECT TIPS No further recording and editing can be carried out on finalised DVD R Press BACK to go back to previous menu item Press EDIT to exit the menu 71 Edit Recordings Recordable DVD continued Changing the disc title name The original disc title name is generated automatically by the recorder You can change the disc title name by following the steps below Insert a recorded DVD into the recorder gt The Index Picture screen appears Press EDIT on the remote control gt The editing menu appears Use A keys to select Disc name or Title name in the menu Use V keys to change the character number or make an entry by using the alphanumeric keypad 0 9 gt Use 4 gt keys to move to the previous or next field To switch between upper and lower case characters press a A on the remote control Q Press OK to confirm the changes Making the edited DVDXRW compatible The edited DVD RW may still display the original titles or hidden scenes when played back on other DVD players This function allows you to make an edited DVD RW compatible with other players Insert a recorded DVD RW into the recorder gt The Index Picture screen appears Press EDIT on the remote control gt The editing menu appears Use A keys to sele
140. ton will delete the oldest unprotected titles automatically from the hard disk in order to make space for the new recording 53 Playback from Hard Disk continued Sorting the titles display order You may organise the titles in a specific order according to certain criteria for easy locating the recordings This order will remain until you exit the content menu Press HDD BROWSER on the remote control gt The content menu appears Press NEXT P to select the SORTING menu 28 02 2005 13 01 00 9 31 03 2005 40 22 00 Delete Order Protected Genre Last Played Delete Protect a title in the HDD A number of editing options are displayed at the bottom of the HDD content menu They can be accessed via the matching colour coded buttons on the remote control Press HDD BROWSER on the remote control gt The content menu appears HDD TITLES 2 2 A 13 01 00 M4 28 02 2005 XJ EFG 31 03 2005 40 22 00 ODELETE CHI Use keys to select a title Q Press the matching colour coded button Use A keys to select one of the on the remote control to access the following sorting options Recording Date Lists the titles by the date recorded Alphabetical Lists the titles by alphabetical order Delete Order Lists the titles by deletion order when the HDD has no or less
141. us setup process see pages 28 29 To make changes to the Setup Select Setup press V Highlight Basic Setup and press OK Move the highlight to the part that you would like to change Language Country Postal Code External Receiver I 2 3 and press OK Follow the instructions on the TV to make the necessary changes and press OK gt Some changes might require a new download of TV listings information This can take up to 24 hours TIPS Press Blue button to return to the current time in the Grid screen Press GUIDE to exit the menu 33 Control TV Programmes Switching on to TV programme s H cH Turn on the TV to the correct programme number for the recorder e g EXT 0 o9 Press STANDBY ON 5 to turn on this recorder Press TUNER repeatedly to toggle between analogue tuner Y PXX digital tuner and digital radio tuner Y RXXX gt X denotes the channel number Press CH to select a desired TV radio channel of the selected tuner gt The active TV programmes will be stored automatically onto the temporary HDD storage in this recorder The information is shown on the Time Shift video bar f you switch to another TV channel on the recorder a new title will be created and a vertical line will be shown on the Time Shift video bar EE You can choose to display or hide the Time Shi
142. wise cancel the operation by pressing the Blue button on the remote control for CANCEL Helpful Hints All the hidden chapters will be played back while in video editing mode The selection of scenes to hide or show can only be done within a title Deleting all chapter markers During recording the chapter marker is set automatically at a specific interval if the function is active see page 38 You can choose to delete all the chapter markers when the recording has finished During HDD recording playback press EDIT on the remote control Press the Red button on the remote control for NO CHAPTER it will delete all the chapter markers in the current title TIPS No editing can be carried out on a protected title see page 54 Press BACK to go back to previous menu item Press EDIT to exit the menu 69 Edit Recordings Recordable DVD About editing recordable DVDs This recorder offers various disc edit options You can change the disc content and settings of a recorded DVD from the editing menu If a DVD R has been finalised it cannot be edited The edited contents may not be available if you play the disc on another DVD player S 9e amp 3 38 0 9 8 8 6 3 O0 OK 4 a 00 00000 08 8888 ga EDIT t BACK ed The displayed options in the editing menu differ depending on the situation and disc t
143. wn data appears The message SIGNAL appears X appears at the bottom of the TV screen 92 Solution Check the recorder audio connection Read chapter Basic Recorder Connections Connecting the audio cables for details Set the Analogue output or Digital output correctly based on the device you have connected to this recorder Read chapter System Menu Options Audio Output settings for details Have your aerial or cable TV signal checked Install the TV channel Read chapter System Menu Options Analogue Channel settings Auto Search for details This message may appear if you insert a disc that was not finalised or contains junk data DVD Rs that have not been finalised are very sensitive to fingerprints dust or dirt This may cause problems during recording To use the disc again do the following 1 Make sure that the surface of the disc is clean 2 Press OPEN CLOSE on this recorder to open the disc tray 3 Insert the disc but do not close the tray 4 Hold down button number 5 on the remote control until the tray closes This recorder will start the repair process 5 If the disc is recovered the Picture Index screen will appear Please observe the following Error during recording The title may be missing Error while changing the title index picture The original title index picture may be visible Error while finalising The disc appears not to have been fin
144. ws you to preview the first 10 seconds of each track on the disc During playback press the Red button on the remote control gt The recorder skips to the next track after 10 seconds of playback To resume normal playback press the Red button again Shuffle play for CD MP3 disc only Select shuffle play mode to allow the recorder to randomly select and play tracks on the disc Press the Green button on the remote control gt It will start play back of all the chapters within the title in a random order To cancel shuffle playback press the Green button again Repeat play The repeat play options vary depending on the disc type During playback press the Yellow button on the remote control to select one of the repeat options gt Repeat chapter DVD DVD R XRVW only gt Repeat track title gt Repeat album playlist if applicable gt Repeat entire disc video CD audio CD DVDxR XRW only To cancel repeat playback press the Yellow button repeatedly until the repeat mode is off or press STOP Repeating a specific segment A B You can repeat the playback of a specific segment within a title chapter track To do this you must mark the start and end of the segment you want During playback press the Blue button on the remote control gt This indicates that the start point has been marked Press the Blue button again to mark the
145. ype Change disc name Make DVD compatible DVDXRW only Finalise disc DVD R only Change title name Video editing Disc name Title name Video edit OCLEAR 9 Index Picture screen The Index Picture screen shows your recordings on a recordable DVD It should appear on the TV once you load a recordable DVD or when playback is stopped TITLES Static lights KI 01 20 00 SPP 21 02 03 The island of lost dream O Lord of the Rings The T Habla Con Ella The Ring 00 32 02 SPP 28 06 03 An Index Picture screen represents each recording information saved The title s index picture The length of recording recording mode and date of recording O The title s name or channel number and date Helpful Hint If the disc is not recorded from this recorder the format of index picture screen might be different You have to adapt the disc menu to the format of this recorder before editing see page 76 TIPS No further recording and editing can be carried out on a finalised DVDER Press BACK to go back to previous menu item Press EDIT to exit the menu 70 Edit Recordings Recordable DVD continued Deleting recordingsltitles You can delete a specific title from the disc However for DVD R discs the deleted space cannot be used for further recordings Insert a recorded DVD into the recorder gt The Index Picture screen appea

Philips DVDR9000H Hard Disk/DVD Recorder

Contents

Download Pdf Manuals

Related Search

Related Contents