Philips professional flat TV 15HF5234
Contents
1. as CGE D Carry out the connections shown opposite 12 Side connections o 0000 HD equipment HD Analogue Connection DVI I GP want ext DVI I In i oo EB par lO DVI aKo z bees HD Digital Connection DVI I Bo HO FMaNT ExT1 DVI I In loo da Computer pa FM ANT EXT 1 DVI I In oo A on Digital ov ia PC ovi AUDIC IN e ooe BOQ r FMANT EXT1 DVI I In eo Analogue ana PC DVI e ooe ow auolc IN Make the connections as shown opposite With the AV key select AV S VHS For a mono set connect the sound signal to the AUDIO L or AUDIO R input The sound automatically comes out of the left and right speakers of the set Headphones When headphones are connected the sound on the TV set will be cut The VOLUME keys are used to adjust the volume level The headphone impedance must be between 32 and 600 Ohms Make the connections as shown opposite With the AV key select HD For more information on using HD mode see page 11 PC with DVI Connect the monitor output DVI of your computer to the DVI I In of the LCD TV Connect the sound output Audio out of the computer to the input DVI Audio in of the LCD TV PC with VGA Connect the monitor output VGA of your computer via a VGA DVI I cable to t2. radio stations Then use the cursor to select a station Using the radio menus Use the MENU key to access the specific radio settings Searching radio stations If you have used the quick installation all the available FM stations will be stored To start a new search use the Install menu Auto Store for a complete search or Manual Store for a station by station search These menus work in exactly the same way as the TV menus Screen saver In the Features menu you can activate close the screen saver The time the frequency of the station and its name if available move across the screen Using in PC monitor mode NOTE When using the LCD TV as a PC monitor slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product For better performance good quality DVI cable with good noise isolation filter is recommended PC Mode Your TV can be used as a computer monitor You must first of all connect the computer and adjust the resolution see p 13 Choosing PC mode Press the AV key on the remote control to display the Source List Use the cursor A V key to select PC and then press the cursor gt key to switch the TV to PC mode DVI I In To return to TV mode press the AV key select TV and validate with gt key Using the PC menus Press the MENU key to access the specific settings of the PC m
3. The number and the sound mode are displayed for a few seconds For some TV programmes the title of the programme appears at the bottom of the screen 18 0 9 Numerical keys For direct access to programmes For a 2 digit programme number the 2 digit must be entered before the dash disappears 19 P lt P Previous programme To access the previously viewed programme Manufactured under license from Dolby Laboratories Dolby and the double D symbols are trademarks of Dolby Laboratories Installing your television set O Positioning the television set Place your TV on a solid stable surface To avoid danger do not expose the TV to water or a heat source e g lamp candle radiator Do not obstruct the ventilation grid at the rear 5 cm Connecting the aerials e Insert the radio aerial lead into the FM ANT socket located at the rear of the TV e Insert the aerial plug into the II socket at Se ae the rear of the set e Connect the power lead to the television and the mains plug into the wall socket 220 240 V 50 Hz For connecting other appliances see page p 12 Switching on To switch on the set press the POWER key A green indicator comes on and the screen lights up Go straight to the Quick Installation chapter If the TV remains in standby mode red indicator Please handle with care and wipe with a soft press the P ott key on the remote control doth to ensure your TV keeps looking ne
4. The picture is enlarged to 14 9 format a thin black band remains on both sides of the picture Zoom 16 9 The picture is enlarged to 16 9 format This mode is recommended when displaying pictures which have black bands at the top and bottom letterbox format Subtitle Zoom This mode is used to display 4 3 pictures using the full surface of the screen leaving the sub titles visible Super Wide This mode is used to display 4 3 pictures using the full surface of the screen by enlarging the sides of the picture O O Widescreen C This mode restores the correct proportions of images transmitted in 16 9 O Note If you display a 4 3 picture in this mode it will be enlarged horizontally Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language cable networks satellite channels etc Press You will obtain o 2 Oe Sco Se wo BD Cen OO Gs e Ca C8 C39 Le JC o JEn PHILIPS Teletext call Selecting a Co j Ls_ Direct access to the items Bm WD amp Contents Stop sub page acquisition Double page teletext CH depending on version Hidden AV information gt Enlarge a ez pags Favourite page B ua m m This is used to call or exit teletext mode The
5. access these settings with key XY e Store this is used to store the sound settings Feature settings settings Press MENU select Features V and Sleep to select an automatic standby period press gt You can adjust To quit the menus press GH Contrast automatic adjustment of the picture contrast which permanently sets the darkest part of the picture to black Screen Formats The pictures you receive may be transmitted in 16 9 format wide screen or 4 3 format conventional screen 4 3 pictures sometimes have a black band at the top and bottom of the screen letterbox format This function allows you to optimise the picture display on screen If your television is equipped with a 4 3 screen Press the key or A V to select the different modes 4 3 The picture is reproduced in 4 3 format Expand 4 3 The picture is enlarged vertically This mode is used to cancell the black bands when watching a programme in letterbox format Compress 16 9 The picture is compressed vertically into 16 9 format If your television is equipped with a 16 9 screen Press the key or lt gt to select the different modes This TV set is also equipped with automatic switching which will select the correct screen format provided the specific signals are transmitted with the programmes 4 3 The picture is reproduced in 4 3 format and a black band is displayed on either side of the picture Zoom 14 9
6. exit the TV menus E Screen Format p 8 Cursor AV lt gt These 4 keys are used to move around the menus Volume To adjust the sound level 10 O Smart picture and sound 11 Used to access a series of predefined picture and sound settings The personal position relates to settings selected from the menus Screen information To display remove the programme number the time the sound mode and the time remaining on the timer Hold down for 5 seconds to permanently display the programme number on the screen 10 PHILIPS Remote Control Keys for LCD TV Functions 12 List of programmes To display clear the list of programmes Use the keys A V to select a programme and the key gt to display it 13 HHI Sound mode Used to force programmes in Stereo and Nicam Stereo to Mono or for bilingual programmes to choose between Dual I or Dual Il The Mono indication is red when in forced position 14 3 Surround Sound To activate deactivate the surround sound effect In stereo this gives the impression that the speakers are further apart For models equipped with Virtual Dolby Surround you can experience Dolby Surround Pro Logic sound effects 15 Teletext p 9 16 WK Mute To mute or restore the sound 17 P Selecting TV programmes To move up or down a programme
7. from 0 100 will be shown on screen indicating the percentage of the installation progress from the SmartLoader to the TV When the data transfer is completed will show 100 and the message GOODBYE will appear SMARTLOADER TO TV 0 100 gt The TV will go to Standby mode When the TV is next powered on it will be configured with the settings from the Master TV and ready for use Problems and Solutions The message 12C ERROR is displayed on the screen gt Bad connection of RJI wire or wrong data transmission has occurred Try again 2 The message WRONG VERSION is displayed on the screen gt The program contained in the SmartLoader has a software code incompatible with the actual TV Reprogram the Wireless SmartLoader from a Master TV whose software code is compatible with the actual TV 3 TV doesn t respond to the SmartLoader gt Check if the LED on the SmartLoader lights up in green when pressing any button If the LED is red it means that the batteries are low and should be replaced gt Bring the SmartLoader closer to the TV infrared receiver and try again Notes Make sure that the 3 R6 AA sized batteries are placed correctly in the bottom compartment of the SmartLoader The LED on the SmartLoader should light up in green when pressing any button indicating operational batteries When the LED shows red the batteries need to be replaced The SmartLoader can only copy the settings be
8. if provided Use only the stand provided with the set making sure that the fixings are properly tightened A diagram showing how to assemble the stand is packed with the stand Never use a make shift stand or legs fixed with woodscrews PHILIPS Be responsible Respect copyrights Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2005 Koninklijke Philips Electronics N V All rights reserved www philips com 3111 256 19292
9. p x Introduction Thank you for purchasing this television set This handbook has been designed to help you install and operate your TV set We would strongly recommend that you read it thoroughly Table of Contents of Contents Installation Presentation of the LCD Television 00 cece eee e eee eee ees 2 Remote control s snesesie nie nouti miea a tab eaewiameades odie deed oats 2 Remote control keys 0 eee ee cee ee eee teen e eens 3 4 Installing your television set 2 2 0 eee eet eee ene 5 Quick installation 2 0 0 cece eee ee ee eee eens 5 Program SOP ecepte oiiaii iE ate A nena dated diay Sacads eben ead 6 Manual st rs sche eee kad one one ee keels heed EEA NE un ea Kee bd 6 Other settings in the Install menu 1 eee eee 6 Operation Pict re settings css sei sds see andis aeaea Aa E RA NAO EAE S 7 Sound adjustments seosion tetiere EE E E ed E E EE eee 7 Feature Settings neres eier oen ba ae tst EEEE E Wate weeds as 7 Screen FORMAES a5 ssi dense isni taenia i Soca Se alas Sesh ace a dh a Saad 8 Teletext Lord ooh dab OSS Rae eGR E a Coa eb a araa ara ade 9 Using the FadiO s s2 ccseds cee ceeds a ine eh wedded kek bak ae 5 10 Using in PE Monitor MOE ssie nseraam neda ib esis a aia Gabe 10 Using in HD High Definition Mode 0 0 eee eee eee 11 Peripherals Video recorder j 646 d i400 kinesis aaa a ea inaim dma tnle eds 12 OtherequipMent ses sereas aatia ae teoerenc os
10. procedure listed below Wired mode using the by packed accessory cable s 20 26 32HF5335D Switch the SmartLoader to Wired mode by sliding the side switch to the icon on the SmartLoader device Examine the rear connectors of the TV set to determine if the 3 pin or 4 pin female connector wire packed with the Wireless SmartLoader should be used Plug in the correct connector wire to the corresponding opening on the TV set usually marked as SERV C and then connect the RJ jack end of the accessory wire to the RJI 1 socket on the SmartLoader The Installation Procedure consists of three simple steps Choosing a Master TV The Master TV is the TV set whose installation and configuration settings are to be copied into other TV s of the same type only 2 Programming the SmartLoader with the settings from the Master TV Follow these steps to program the SmartLoader with the settings of the Master TV a Wireless method gt Set the SmartLoader to Wireless mode using the side switch gt Turn on the TV and while holding the SmartLoader point it in the direction of the TV Press the MENU Key on the SmartLoader b Wired method gt Connect the SmartLoader to the TV using the appropriate accessory cable gt Set the SmartLoader to Wired mode using the side switch gt Turn on the TV and while holding the SmartLoader point it in the direction of the TV Press the MENU Key on the SmartLoader T
11. summary appears with a list of items that can be accessed Each item has a corresponding 3 digit page number If the channel selected does not broadcast teletext the indication 100 will be displayed and the screen will remain blank in this case exit teletext and select another channel Enter the number of the page required using the 0 to 9 or P keys Example page 120 enter 120 The number is displayed top left the counter turns and then the page is displayed Repeat this operation to view another page If the counter continues to search this means that the page is not transmitted Select another number Coloured areas are displayed at the bottom of the screen The 4 coloured keys are used to access the items or corresponding pages The coloured areas flash when the item or the page is not yet available This returns you to the contents page usually page 100 Certain pages contain sub pages which are automatically displayed successively This key is used to stop or resume sub page acquisition The indication appears top left To activate or deactivate the double page teletext display mode The active page is displayed on the left and the following page is displayed on the right Press if you want to hold a page i e the contents page The active page is then displayed on the right To return to normal mode press EB To display or hide the concealed information games solutions This allows you to display t
12. PHILIPS Hospitality Television 20 26 32HF5335D 15 20HF5234 Installation of your Philips Hotel TV I Introduction This addendum has been designed to help you install programmes on this Digital TV and activating the hotel mode Use this addendum in conjunction with the User Manual of this television A Please handle the TV with care and wipe with a soft cloth to ensure your TV keeps looking new 2 The benefits of the Philips hotel TV This TV is specially designed for hotels The Philips hotel TV offers all kind of features to Maximise the convenience for the hotel and meet the needs for the guest gt Welcome message to give a friendly welcome to your guest when activating the tv gt Remote control features like low battery detection and an anti theft screw for preventing of theft for batteries gt Access to the user menu can be blocked This prevents users e g guests from deleting or changing program settings and or modifying picture and sound settings This ensures that TVs are always set up correctly A switch on volume and programme can be selected After switching on the TV will always start on the specified program and volume level The maximum volume can be limited in order to prevent disturbance The television keys VOLUME PROGRAM and MENU can be blocked Screen information can be suppressed Programmes can be blanked VVVV WV 3 Installing the channels Installing Digital Programs only applic
13. able for 20 26 32HF5335D Ensure the TV is in Digital mode If it is in Analogue mode press the A D Analogue Digital key on the Remote Control to enter the Digital mode MENU DIGITAL I Press the Menu Digital key on the Remote Control 2 Press the Up Down Arrow Key to scroll to the item called INSTALLATION and press the Right Arrow Key 3 Press the Up Down Arrow Key to scroll to the item called SERVICE SETUP and press the Right Arrow Key 4 Press the Up Down Arrow Key to scroll to the item called REINSTALL ALL SERVICES and press the Right Arrow Key 5 Press the Up Down Arrow Key to scroll to the item called SEARCH and press OK to start the scan 7he TV will now start to scan and install all available Digital TV channels and Radio stations automatically When the scan is completed the TV menu will indicate the number of digital services found 6 Press the OK key again to Store all the services that have been found Installing Analogue Programs Ensure the TV is in Analogue mode If it is in Digital mode press the A D Analogue Digital key on the Remote Control to enter the Analogue mode MENU fF i w I Press the Menu TV key on the Remote Control 2 Press the Up Down Arrow Key to scroll to the item called INSTALL and press OK 3 Press the Up Down Arrow Key to scroll to the item AUTO STORE and press OK The TV will now start to scan and install all available Analogue TV channels auto
14. alogue Digital Analogue X X Digital SDTV 576 i EDTV 480 p x X EDTV 576p X HDTV 720p X HDTV 1080 i 11 Connecting peripheral equipment The television has 1 external socket situated at the back of the set EXT1 and sockets on the side Press the AV key on the remote control to display Source List and select TV or peripheral equipment connected to EXT1 AV SVHS PC HD or Radio The EXT1 socket has audio CVBS RGB inputs and audio CVBS outputs The side connections has audio inputs CVBS S VHS inputs headphone out 150 r FMANT EXT 1 DVI I In al Headphone nae Audio In Video in ssi S Video aimo DVI Audio In Video recorder Carry out the connections shown opposite using a good quality za euroconnector cable m FMANT EXT 1 DVI I In i He If your video recorder does not have a euroconnector socket the only n connection possible is via the aerial cable You will therefore need to tune in your video recorder s test signal and assign it programme aN number O refer to manual store p 6 To reproduce the video recorder picture press O key Video recorder with decoder m Y Connect the decoder to the second euroconnector socket of the video recorder You will then be able to record scrambled C VCR transmissions Other equipment 150 qr FMANT EXT 1 DVI I In Satellite receiver decoder CDV games etc
15. andwidth Digital Content the same way in all countries There are Protection developed by Intel to provide different standards BG DK and L L The secure copy protection of content transmitted System setting p 6 is used to select these digitally from the source such as DVD player different standards This is not to be confused or set top box to the TV display with PAL or SECAM colour coding Pal is used RGB signals These are the three video signals in most countries in Europe Secam in France Red Green Blue which make up the picture Russia and most African countries The United Using these signals improves picture quality States and Japan use a different system called S VHS Signals These are 2 separate Y C video NTSC The inputs EXT1 and EXT2 are used to signals from the S VHS and Hi 8 recording read NTSC coded recordings standards The luminance signals Y black and 16 9 Refers to the ration between the length and white and chrominance signals C colour are height of the screen Wide screen televisions recorded separately on the tape This provides have a ration of 16 9 conventional screen TV better picture quality than with standard video sets have a ration of 4 3 Table of TV frequencies Frequenztabelle der Fernsehsender Liste des fr quences TV Frequentietabel TV Zenders Tabella delle frequenze TV Lista de frecuencias TV EUROPE CANAL 15 S16 17 18 19 Lista das frequ ncias TV Lis
16. come Message for 30 seconds after the TV set is turned on OFF Disables the display of the Welcome Message If OSD DISPLAY is set to OFF then the Welcome Message is automatically disabled WELCOME MESSAGE The Welcome Message function allows the TV to show a customized greeting to the hotel guest whenever the TV is switched on This helps to personalize the hotel experience for guests The Welcome Message can consist of 2 lines of text with each line containing a maximum of 20 alphanumeric characters Use the Remote Control arrow keys to create the Welcome Message To enable the display of the Welcome Message the DISPLAY MESSAGE option must be ON To clear the Welcome Message from the TV s memory select CLEAR LOCAL KEYBOARD LOCK ON The television keys VOLUME PROGRAM and MENU are blocked OFF The television keys VOLUME PROGRAM and MENU function normally ALL The television keys VOLUME PROGRAM MENU and POWER are blocked REMOTE CONTROL LOCK ON Standard Remote Control keys are disabled OFF All Remote Control keys will function normally OSD DISPLAY ON Normal screen information is displayed e g programme information OFF Screen information is suppressed HIGH SECURITY MODE ON Allows access to the BDS Hotel Mode Setup Menu via the special BDS Setup Remote only RC2573 01 OFF Allows access to the BDS Hotel Mode Setup Menu via BDS Setup Remote or via normal Remote Control using special key co
17. cture e Brightness this changes picture brilliance e Colour this changes the intensity of the colour e Contrast this changes the difference between the light and dark tones e Sharpness this changes the picture definition e Colour Temp this changes the colour rendering Cold bluer Normal balanced Brightness Use the A V keys to select a setting and the or Warm redder lt gt keys to adjust e Store to store the picture adjustments and Once the adjustments have been made select settings Sound adjustments adjustments Press MENU select Sound V and press gt Description of the settings e Equalizer to adjust the sound tone from bass 100 Hz to treble 8000 Hz e Balance this balances the sound on the left and right speakers Equalizer bey is e Delta Volume this is used to compensate 4000 Hz any volume discrepancies between the 3000 Hz different programs or EXT sockets This 8000 Hz The Sound menu is displayed setting is available for programs 0 to 40 and the EXT sockets Use the A V keys to select a setting and the AVL Automatic Volume Leveller this is lt gt keys to adjust used to limit increases in sound especially on Once the adjustments have been made select program change or advertising slots Store and press gt to store these changes e Dolby Virtual To activate deactivate the To quit the menus press G surround sound effect You can also
18. de Setup menu BDS MODE ON BDS Hotel Mode is ON gt The user menu is blocked gt All settings of the Hotel Mode Setup menu are in effect OFF BDS Hotel Mode is OFF gt The TV operates as a normal consumer TV SWITCH ON VOL When the user switches the TV ON it will play at the specified volume level There are 2 options gt LAST STATUS Upon start up the TV volume will be set to the level before the TV set was last turned off gt USER DEFINED As specified by installer Remark SWITCH ON VOL cannot exceed the MAXIMUM VOL level This is the volume level with which the Hotel Mode Setup menu was entered MAXIMUM VOL The TV Volume will not exceed the selected volume level SWITCH ON CHANNEL When the user switches the TV ON it will tune to the specified channel There are 2 options gt LAST STATUS The TV will switch on to the last channel that was shown before the TV set was turned off gt USER DEFINED Any analogue channel can be chosen to be the first channel to switch on POWER ON The Power On function allows the TV to enter a specific mode of operation On or Standby after the mains power is activated ON When set the TV will always turn ON after the mains power is enabled STANDBY When set the TV will always turn to STANDBY after mains power is enabled LAST STATUS When set the TV will always turn to the last power status before the mains power was disabled DISPLAY MESSAGE ON Enables display of the Wel
19. de sequence AUTO SCART The Auto Scart function enables auto detection of AV devices that are connected to the TV s Scart connector ON Enables Auto Scart switching in BDS Hotel Mode OFF Disables Auto Scart switching in BDS Hotel Mode MONITOR OUT ON Allows audio amp video output from TV via relevant AV connectors if available OFF Disables both Audio amp Video output from the TV to prevent illegal copying BLANK CHANNEL The Blank Channel function disables the display of video on the TV but does not affect the audio output This function can be used for audio applications example Off air radio transmission music channels and so on which do not necessarily require the display of video ON The current programme is blanked OFF The current programme is not blanked normal visible DEFAULT value BLANK CHANNEL can be set for every channel Use P P to go through all the programmes and set the desired status per channel The programme number is visible in the top left corner Low Battery Check This television set has a special feature which checks the battery power level of a TV Remote Control and indicates if the battery is low and requires changing Note The Low Battery Check function works only with certain models of Remote Controls Please check with the Philips sales representative if the Remote Control used with this TV supports this function To activate the Low Battery Check function hold the TV Remo
20. e dna ew makes aord 13 Side connections sessesasi is ante d alee ace n n baal a ersleern pl aioe a Ske a 13 FID equipment escresiror tennerien ea anne dane eee ate ec e iaa a a Dads 13 COMPULGr pissoprioriam dare tide E E ates ea E E eee aes 13 Practical information TIPS shsicuches goa hebepinnd eetardee ated Siete aaa A haem eases kere 14 GIOSSARY cishenastr ales aiaa NaS are aeindre mateo ee mean Mae E Go 14 Recycling The packaging of this product is intended to be recycled Apply to the local authorities for correct disposal Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal househols waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health Presentation of the LCD Television POWER VOLUME MENU PROGRAM fC ff 5 O 7350 FMANT EXT1 DVI I In Ir O Television keys POWER to switch the TV on or off e VOLUME to adjust sound level e MENU to access or close men
21. he DVI I In of the TV Connect the sound output Audio out of the computer to the input DVI Audio in of the LCD TV Not supplied with the set For more information on using PC mode see page 10 Configure the computer for optimum resolution on 15PF5121 1024 x 768 75 Hz 20PF5121 640 x 480 75 Hz 20PF5321 1280 x 768 60 Hz 23PF5321 1280 x 768 60 Hz 13 Poor reception The proximity of mountains or high buildings may be responsible for ghost pictures echoing or shadows In this case try manually adjusting your picture see Fine Tune p 6 or modify the orientation of the outside aerial If you are using an indoor aerial reception may be difficult in certain conditions You can improve reception by rotating the aerial If the reception remains poor you will need to use an external aerial No picture Have you connected the aerial socket properly Have you chosen the right system p 6 Poorly connected euroconnector cables or aerial sockets are often the cause of picture or sound problems sometimes the connectors can become half disconnected if the TV set is moved or turned Check all connections If on certain channels you receive a picture but no sound this means that you do not have the correct TV system Modify the System setting p 6 The amplifier connected to the TV does not deliver any sound Check that you have not confused the audio output with the audio input PC mode doesn t Check that you have configu
22. he Master TV will show the following menu SMARTLOADER TO TV gt TV TO SMARTLOADER gt On the TV screen highlight the menu option TV TO SMARTLOADER Press the right arrow key on the SmartLoader to start the programming process A number display from 0 100 will be shown on screen indicating the percentage of the programming progress from the TV to the SmartLoader When the programming is completed will show 100 and the message DONE will appear TV TO SMARTLOADER 0 100 The SmartLoader is programmed and can be used to install and configure other TVs Copying the settings of the Master TV to other TVs with the SmartLoader Follow these steps to install and configure the settings of a Philips TV with the SmartLoader a Wireless method gt Set the SmartLoader to Wireless mode using the side switch gt Turn on the TV and while holding the SmartLoader point it in the direction of the TV Press the MENU Key on the SmartLoader b Wired method gt Connect the SmartLoader to the TV using the appropriate accessory cable gt Set the SmartLoader to Wired mode using the side switch gt Turn on the TV and while holding the SmartLoader point it in the direction of the TV Press the MENU Key on the SmartLoader On the TV screen highlight the menu option SMARTLOADER TO TV Press the right arrow key on the SmartLoader to initiate the copying process gt A number display
23. he top or bottom part of the page and then return to normal size Instead of the standard coloured areas displayed at the bottom of the screen you can store 4 favourite pages on the first 40 channels which can then be accessed using the coloured keys red green yellow blue Once set these favourite pages will become the default every time teletext is selected Press the MENU key to change to favourite pages mode Display the teletext page that you want to store Press the coloured key of your choice for 3 seconds The page is now stored Repeat the operation with the other coloured keys Now when you consult teletext your favourite pages will appear in colour at the bottom of the screen To temporarily retrieve the standard items press MENU To clear everything and return the standard items as the default press for 5 seconds OO OOS Using the radio the radio Choosing radio mode Press the AV key on the remote control to display the Source List Use the cursor A V key to select FM Radio and then press the cursor gt key to switch the TV to radio mode To return to TV mode press the AV key select TV and validate with gt key In radio mode the number and name of the station if available its frequency and the sound mode are indicated on the screen Selecting programmes Use the 0 9 or P keys to select the FM stations from 1 to 40 List of radio stations Press the Z key to display hide the list of
24. matically This operation will take a few minutes The TV display will show the progress of the scan and the number of programmes found Refer to the chapter on Automatic Tuning of Analogue Programmes in the User Manual for more details You can also refer to the chapter on Manual Tuning of Analogue Programmes in the User Manual if a manual scan is preferred 4 Activating the Hotel Mode Setup menu BDS Switch on the television and select an analogue channel On the Remote Control press keys 3 1 9 7 5 3 MUTE The BDS HOTEL MODE SETUP MENU becomes visible Use the cursor keys to select and change any of the following settings RWN BDS MODE ON OFF SWITCH ON SETTINGS SWITCH ON VOLUME 0 100 LAST STATUS MAXIMUM VOLUME 0 100 SWITCH ON CHANNEL USER DEFINED LAST STATUS POWER ON ON STANDBY LAST STATUS DISPLAY MESSAGE ON OFF WELCOME MESSAGE LINE I LINE 2 CLEAR CONTROL SETTINGS LOCAL KEYBOARD LOCK ON OFF ALL REMOTE CONTROL LOCK ON OFF OSD DISPLAY ON OFF HIGH SECURITY MODE ON OFF AUTO SCART ON OFF MONITOR OUT ON OFF BLANK CHANNEL ON OFF STORE gt 5 Select STORE and press CURSOR RIGHT to save the settings and exit BDS Hotel Mode setup Press MENU to exit without saving 6 For BDS Hotel Mode settings to take effect you must turn the TV set Off then back On BDS Hotel Mode Functions This paragraph describes the functionality of each item in the BDS Hotel Mo
25. onitor mode Use the cursor to adjust them the settings are automatically saved 10 e Picture Brightness Contrast to adjust the brightness and contrast Horizontal Vertical to adjust the horizontal and vertical placing of the image Colour Temp to adjust the colours cold normal or warm e Audio Selection to choose the sound reproduced on the TV PC HD TV or Radio e Features only available on certain versions Phase Clock eliminates the horizontal Phase and vertical Clock interfering lines Format to choose between full screen or native format of the PC screens Auto Adjust position is set automatically e Reset To Factory Setting to return to the factory settings default settings Using in HD High Definition Mode Only available on certain versions HD Mode The HD High Definition mode allows you to enjoy clearer and sharper pictures through the DVI I inputs if you are using a HD receiver equipment that can transmit high definition programming You must first of all connect the HD equipment see p 13 Choosing HD mode Press the AV key on the remote control to display the Source List Use the cursor A V key to select HD and then press the cursor gt key to switch the TV to HD mode To return to TV mode press the AV key select TV and validate with gt key Using the HD menus Press the MENU key to access the specific settings of the HD mode Use the cursor to adju
26. red the computer on a compatible display resolution work see p 13 Snowy picture Noise is displayed if the connected digital equipment s DVD player or set top when switched to box HDCP authentication failed Check the user manual for the digital HD D mode equipment you are connecting Remote control The TV set does not react to the remote control the indicator on the set no longer flashes when you use the remote control Replace the battery Standby If the set receives no signal for 15 mins it automatically goes into standby mode To save power your set is fitted with components that give it a very low power consumption when in standby mode less than 1 VV Cleaning the set Only use a clean soft and lint free cloth to clean the screen and the casing of your set Do not use alcohol based or solvent based products Still no results Disconnect the mains plug of the TV for 30 seconds then reconnect it If your TV set breaks down never attempt to repair it yourself contact your dealer s after sales service DVI Digital Visual Interface A digital interface VHS and 8 mm where the Y C signals are standard created by the Digital Display combined to provide only one video signal Working Group DDWG to convert analog NICAM sound Process by which digital sound signals into digital signals to accommodate can be transmitted both analog and digital monitors System Television pictures are not broadcast in HDCP High b
27. rove Television and Radio Reception Mains connection Before connecting the TV to the mains check that the mains supply voltage corresponds to the voltage printed on the type plate on the rear panel of the TV If the mains voltage is different consult your dealer Important This apparatus is fitted with an approved moulded 13AMP plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost make contact with your retailer in order to verify the correct type 3 Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be removed Connecting the aerial The aerial should be connected to the socket marked r at the back of the set An inferior aerial is likely to result in a poor perhaps unstable picture with ghost images and lack of contrast Make shift loft or set top aerials are often inadequate Your dealer will know from experience the most suitable type for your locality Should you wish to use the set in conjunction with other equipment which connects to the aerial socket such as TV games or a video camera it is recommended that these be connected via a combiner unit to avoid repeated connection and disconnection of the aerial plug Fitting the stand
28. ss the MENU key and select the Install menu Language to change the display language for the menus Country to select your country GB for Great Britain This setting is used for the search automatic programme sort and teletext display If your country does not appear in the list select Auto Store to start automatic search for all programmes available in your region If the transmitter or cable network sends the automatic sort signal the programmes will be numbered correctly If this is not the case you need to use the Sort menu to renumber the programmes Some transmitters or cable networks broadcast their own sort parameters region language etc In this case indicate your choice using the AV keys and validate with gt To quit or interrupt the search press MENU If no picture is found consult the possible solutions p 14 Name f required you can give a name to the programmes and external connectors Use the lt gt keys to move around the name display area 5 characters and the A V keys to select the characters When the name has been entered use the lt key to exit The name is stored Note on installation the programs are named automatically when an identification signal is sent O To quit the menus press G4 Picture settings settings Press MENU then gt The Picture menu is Store and press gt to store them Press displayed to exit Description of the adjustments Pi
29. st them the settings are automatically saved Picture e Brightness this changes picture brilliance e Colour this changes the intensity of the colour e Contrast this changes the difference between the light and dark tones e Sharpness only available for certain signal only this changes the picture definition e Colour Temp this changes the colour rendering Cold bluer Normal balanced or Warm redder e Store to store the picture adjustments and settings Sound e Equalizer to adjust the sound tone from bass 100 Hz to treble 8000 Hz e Balance this balances the sound on the left and right speakers e Delta Volume this is used to compensate any volume discrepancies between the different programs or EXT sockets This setting is available for programs 0 to 40 and the EXT sockets e AVL Automatic Volume Leveller this is used to limit increases in sound especially on program change or advertising slots e Dolby Virtual To activate deactivate the surround sound effect You can also access these settings with key oe e Store this is used to store the sound settings Features Sleep to select an automatic standby period e Horizontal to adjust the horizontal placing of the image Here is the list of the different HD display resolutions available on your TV 15 39cm XGA Analogue SDTV 480 i x x Digital Analogue 20 51cm VGA 20 51cm WXGA 23 58cm WXGA Digital An
30. te Control in front of the TV and press and hold the OK button on the Remote Control for at least 5 seconds A message will appear on the TV screen to indicate if the battery power level is OK or if it is Low If the message indicates that the battery level is low it is recommended to change the batteries of the Remote Control immediately 5 Cloning of settings Cloning of analogue TV channels and TV settings as described in the chapter Hotel Mode Set up menu For 15 20HF5234 o Wireless cloning with the SmartLoader 22AV1120 or 22AV1135 o Cloning off all adjustable TV settings analogue channel table For 20 26 32HF5335D o Wired cloning with the SmartLoader 22AV1135 using the wire packed with the SmartLoader o Cloning off all adjustable TV settings analogue channel table digital channel table via automatic installation Instruction for cloning of settings between TVs Philips SmartLoader 22AV1 135 00 The Philips SmartLoader is an installation tool especially designed for easy and fast installation and copying of TV settings on Philips Institutional TV s The Philips SmartLoader works in 2 modes Wireless and Wired Wireless mode through infrared sensor 15 20HF5234 oa 3 IN Switch the SmartLoader to Wireless mode by sliding the side switch to the icon on the SmartLoader device Point the Wireless SmartLoader to the TV s infrared receiver optimal distance of 5 30cm and proceed with the Installation
31. te over TV senderne Tabell over TV frekvenser frekvenci inak a list ja Tabell ver TV frekvenser TV taajuustaulukko Kat Aoyos OUXVOT TWV Troptriv Cnucok YacToT nepefaTunkos A televizi6 addallomasok Lista cz stotliwo ci stacji nadawczych Seznam frekven n ch p sem vys la Zoznam frekven n ch p siem vysiela ov FRANCE CANAL FREQ MHz CANAL FREQ MHz 33 567 25 ODMNANKHAAAAAATAARARARAARRWWWWWH ITALY CANALE FREQ MHz A B Cc D E F G H H Information for users in the UK not applicable outside the UK Positioning the TV For the best results choose a position where light does not fall directly on the screen and at some distance away from radiators or other sources of heat Leave a space of at least 5 cm all around the TV for ventilation making sure that curtains cupboards etc cannot obstruct the air flow through the ventilation apertures The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres General Points Please take note of the section entitled Tips at the end of this booklet Interference The Department of Trade and Industry operates a Radio Interference Investigation Service to help TV licence holders improve reception of BBC and IBA programmes where they are being spoilt by interference If your dealer cannot help ask at a main Post Office for the booklet How to Imp
32. tween 2 TVs of the same type Once the SmartLoader is programmed with the settings from a Master TV of a certain type or model then these settings can be installed on another TV of the same model only The SmartLoader cannot be used to copy the digital channel table of a Digital TV set If the SmartLoader is used with a DVB European Digital TV set then the TV set must first be switched to Analog mode 009 Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 22002 96 EC Please find out more about the separate collection system for electrical and electronic products in your local neighborhood Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health local authorities for correct disposal ES The packaging of this product is intended to be recycled Apply to the PHILIPS 20070 Koninklijke Philips Electronics N V all rights reserved Specifications are subject to change without notice Trademarks are property of Koninklijke Philips Electronics N V or their respective owners 15PF5121 FLAT I VA 20PF5121 23PF5321 PHILIPS
33. us The PROGRAM keys can be used to select an adjustment and the VOLUME keys to make that adjustment PROGRAM P to select programmes Rear of set The main connections are made at the bottom of the television For more details on connections see page 12 Do not remove the protective sheet until you have completed the stand wall mounting and connections Power socket TV and radio aerial sockets EXT1 socket DVI I input for connecting a HD high definition equipment or computer with DVI output Side connections Depending on version Remote control control CR 2025 Pull out the plastic insulation sheet from the battery this will activate the remote control The battery supplied with the appliance does not contain mercury or nickel cadmium so as to protect the environment Please do not discard your used batteries but use the recycling methods available consult your distributor 2 3 4 5 6 7 8 9 Remote Control Keys for LCD TV Functions STANDBY To set the TV to standby mode To switch the TV set on again press P 0 to 9 or AV keys Sleeptimer To select the length of time before the set automatically switches to standby from 0 to 240 minutes AV To display Source List to select TV or peripheral equipment connected to EXT1 AV S VHS PC HD or Radio p 12 GB Teletext keys p 9 Unused key MENU To call up or
34. w The indicator will flash when you use the remote i control Plug amp Play Quick installation _ installation When you turn on the TV set for the first time The search starts automatically All the available a menu is displayed on screen This menu TV programmes and radio stations will be prompts you to select the country and language stored This operation takes a few minutes The for the menus display shows the progress of the search and the number of programs found At the end of the search the menu disappears To exit or interrupt the search press MENU If no programme is found consult the possible solutions p 14 lt GB gt If the transmitter or cable network sends the automatic sort signal the programs will be numbered correctly In this case the installation is complete If this is not the case you need to use the Sort menu to number the programs correctly Some transmitters or cable networks broadcast their own sort parameters region language etc In this case indicate your choice using the AV keys and validate with gt Country If the menu is not displayed press the MENU key e to display the menu Use the A V keys on the remote control to select your country and confirm with gt If your country does not appear in the list select choice Next select your language using the A V keys and confirm with gt Program sort sort Press the MENU key The TV Menu is displa
35. yed on the screen wwe fy With the cursor select the Install menu followed by the Sort menu Select the programme you want to move using the AV keys and press gt Then use the A V keys to select the new number and validate with lt Repeat steps and O for each program you wish to renumber O To quit the menus press GH Manual store store This menu is used to store the programmes one at a time Press the MENU key With the cursor select the Install menu then Manual store wis Manual store System System select Europe automatic detection or Western Europe BG standard Eastern Europe DK standard United Kingdom I standard or France LL standard Except for France LL standard you must select choice France Search press gt The search starts Once a programme is found the scanning stops and its name is displayed when available Go to the next step If you know the frequency of the required programme this can be entered directly using the 0 to 9 keys If no picture is found consult the possible solutions p 14 Program No enter the required number with the lt gt or 0 to 9 keys Fine Tune if the reception is not satisfactory adjust using the lt gt keys Store press gt The program is stored Repeat steps to for each programme to store To quit the menus press GH eo 8 O Other settings in the Install menu Pre
Download Pdf Manuals
Related Search