Home

Philips Cordless telephone CD5301S

1. C SELECT 2 Press f SELECT again to confirm A long confirmation beep tone is emitted 22 Phonebook Store direct access memory You can store up to 9 direct access memories Key CJ to A long press on the keys in stand by mode will automatically dial the stored phone number Press C T MENU scroll to Phonebook and press SELECT scroll to Direct Memory and press SELECT Select a key Key to Key 9 and press VIEW If there is a stored number in that key the number name will be displayed If there is no number stored for the selected key or if you want to change the number currently stored press SELECT and press C SELECT again to select Add OK to display the phonebook list and scroll to the entry you wish to store as direct access Press gt memory OK to confirm A long confirmation beep tone is emitted Press Delete a direct access memory Press C T MENU scroll to Phonebook and press SELECT scroll to Direct Memory and press Tf SELECT Select a key Key to Key 9 and press view Press MENU and scroll to Delete Press OK to confirm A long confirmation beep tone is emitted Transfer phonebook This feature allows you to transfer the phonebook from one handset to another handset when there are at least 2 handsets registered to your base station Press MENU scroll to Phonebook and press SELECT scroll to Phbk transfer and press Z S
2. EN Troubleshooting Troubleshooting of the phone Problem Causes Solution The E icon is not blinking when the handset is placed on the base Bad battery contact Dirty contact Battery is full ove the handset slightly Clean the battery contact with a cloth moistened with alcohol o need to charge No dialling tone No power Batteries are empty You are too far from the base station Wrong line cable Line adaptor when needed is not connected to the line cord Check the connections Reset he phone unplug and plug back in the mains Charge the batteries for at least 24 hours Move closer to the base station Use the line cable provided Connect the line adaptor when needed to the line cord Poor audio quality You are too far from the base station The base station is too close to electrical appliances reinforced concrete walls or metal doorframes Move closer to the base station ove the base station at least one metre away from any elec rical appliances The ff icon is blinking Handset is not registered to the base station The handset is too far from the base station Register the handset to the base station Move closer to the base station 50 Troubleshooting Problem Causes Solution The handset displays not available e when attempting to add another handset to the base station when using a
3. To change your selection To confirm your selection e Return to previous menu level or stand by screen Press key to scroll to your desired option 2 Choose SELECT by pressing the key directly below it left soft key ED 3 Choose BACK by pressing he key directly below it right soft key SELECT The location of your base station can have an effect on the range and performance of your CD530 see TIP Connect below Connecting the Base Station l Place the base station in a central location near the telephone line socket and electricity sockets 2 Connect the line cord and the power cable to the proper connector at the back of the base station l 2 A a n 0 O J a Connect the line cord to the line socket Connect the power supply Q 3 Connect the other end of the line cord to the telephone line socket and the other end of the power cab to the electricity socket The line adaptor may not be attached to the line cord In this case you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket TIP Avoid placing the base station too close to large metal objects such as filing cabinets radiators or electrical appliances This can impair the range and sound quality Buildings with thick internal and external walls may impair transmission of signals to and from the base WARNING The
4. User manual priiPs Charge the handset s 24 hours before use PHILIPS 4 Important Information 4 For your safety 4 Installation requirements 4 Need Help 5 What s in the box 6 Your CD530 6 Overview of the handset 9 Overview of the base station 9 Main features of your CD530 Il Connect 12 Install I7 Call 21 Phonebook 24 Call log 26 SMS 33 Clock amp Alarm 34 Personal Settings 39 Advanced Settings 46 Network Services 49 Games 50 Troubleshooting 52 Information ui Ww Index EN Important Information For your safety In the event of a power failure you cannot use this handset to make or receive calls Alternative arrangements should be made for access to emergency calls Your PIN code is preset to 0000 If you change your PIN code keep the PIN details in a safe place where you have easy access to them Do not lose the PIN code To avoid damage or malfunction Do not allow the product to come into contact with liquid Do not open it as you could be exposed to high voltages Never use any battery type other than the one supplied Do not expose the phone to excessive heat caused by heating equipment or direct sunlight Do not drop your phone or allow objects to fall on your phone Do not use any cleaning agents containing alcohol ammonia benzene or abrasives as these may harm the set Active mobile phones in the vicinity may cause interference Do not use the
5. Disposal instructions for old products The WEEE Directive Waste Electrical and Electronic Equipment 2002 96 EC has been put in place to ensure that products are recycled using best available treatment recovery and recycling techniques to ensure human health and give utmost protection to the environment Your product is designed and manufactured with high quality materials and components which can be recycled and reused Do not dispose of your old product in your general household waste bin Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol Use one of the following disposal options Dispose of the complete product including its cables plugs and accessories in the designated WEEE collection facilities 2 If you purchase a replacement product return your old product in its entirety to the retailer He should accept it as required by the WEEE Directive Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste sail A financial contribution has been paid to the associated national recovery amp recycling system Sy The labelled packaging material is recyclable 52 A Accessories 5 Alarm 33 Alarm tone 33 Answer a call 14 18 Auto Hang up 37 Auto Pick up 37 Auto Prefix 44 B Baby Call 41 Babysit mode 38 Backligh Basic operations Battery level 13 C Call
6. 2 Scroll to Delete and press C SELECT to confirm deletion Delete all Draft messages While viewing the message content press MENU to display the Draft box menu options 2 Scroll to Delete All and press SELECT 3 Press C SELECT again to confirm deletion SMS settings This menu allows you to set up the server for sending and receiving SMS messages Your CD530 can receive messages from 3 service centers Each service center consists of 2 numbers 1 ncoming number Outgoing number The maximum length of an incoming outgoing number is 24 digits The incoming and outgoing numbers of your CD530 are already set to work on your country network We advise you not to modify these settings For more details or in case of any problems please contact your local network provider SMS reception Your CD530 can receive SMS messages from another phone if you have subscribed to the CLI and SMS ser vices from your network provider By default SMS reception is set to On so that you can receive SMS mes sages To activate or deactivate the reception of SMS Press f MENU press C SELECT to enter SMS scroll to SMS Settings and press SELECT press SELECT to enter SMS Reception 2 Scroll to On or Off and press C SELECT to confirm Even if SMS reception is Off you can still send SMS messages SMS Box only for UK In order to send and receive SMS messages there must at least be SMS Box created Box 9 w
7. 40 Call Back 47 Call Barring 40 Call Forward 46 Call log 17 24 Call waiting 20 Caller Line Identification 20 Calls in progress 8 Charge battery 12 Clock amp Alarm 33 Conference call 20 Conformity 52 Connect Base Station Contrast 36 Country Setting 45 D Date amp time 33 Date and time 14 Default SMS center 32 Default settings 6 Delete SMS message 28 Delete call log 24 Delete phonebook 22 Dial Mode 39 Direct access memory 23 Direct dialling 7 Draft box 29 E Earpiece volume 8 Edit Draft message 29 Edit phonebook 22 End a call 14 18 Event LED 15 F Forward SMS message 28 G Group melody 35 a Index H Handset Name 36 Handset Tones 34 Handsfree answering 8 l Icons amp symbols 8 Inbox 27 Incoming number 32 Install battery 12 13 14 16 Intercom 19 Intrusion Mode 45 K Key Beep 35 Keypad lock 14 Keypad lock unlock 14 Keypad unlock 14 L Language 37 Loudspeaker 8 Loudspeaker mode 18 Loudspeaker volume 19 M Make a call 14 Master PIN 43 Memory 49 Menu navigation 10 Mute 18 Mute handset 8 N Noise interference 5 O Other network services 48 Out of range 13 Outgoing number 31 Overview of the base station 9 Overview of the handset 6 P Paging 14 Personalize 34 Phonebook 17 21 Predialling 17 R Recall Time 39 Recycling and disposal 52 Redial list 17 24 Registration 42 Reply SMS message 28 Reset Unit 44 Ring Melody
8. C SELECT Enter the number and press ET OK to confirm A confirmation beep is emitted The maximum length of an incoming number is 24 digits Default SMS center The default SMS center number is To set default SMS center Press C T MENU press C SELECT to enter SMS scroll to SMS Settings and press SELECT scroll to Default Ctr and press SELECT Scroll to SMS center that you wish to set as default center SMS Center SMS Center 2 or SMS Center 3 and press SELECT A confirmation beep is emitted Ist ring When this function is set to Off the first ring from a voice call will not sound This is particularly useful in coun tries where calling line identity is sent after the first ring so no phones in the house would ring when a message arrives To set Ist ring 2 32 Press C T MENU press C SELECT to enter SMS scroll to SMS Settings and press C SELECT scroll to Set Ist Ring and press C SELECT Scroll to On or Off and press C SELECT to confirm Clock amp Alarm Clock amp Alarm ras Set Date Time Alarm Alarm Tone Set date and time Press C T MENU scroll to Clock amp Alarm and press SELECT press SELECT again to enter Set Date Time 2 Enter the current time HH MM and current date DD MM YY and press SELECT Enter the date in Day Month Year format and the time in 24 hour format 3 A confirmation beep is emitted and the screen returns to Clock amp Alarm
9. Off and press SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu 45 EN Network Services Net Service Call Forward Call Fwd Busy Call Fwd UnAns Voice Mail Call Back Cancel Call Bk Withhold ID This menu provides a convenient means for you to access activate or deactivate some network services that are country subscription dependent Contact your network provider for more information about these services The default numbers and values that are preset in your CD530 should be the best suited for your country network and therefore you should not need to change them Call Forward There are 3 call forwarding options available Unconditional Call Forwarding When Busy and When Unanswered Set up Call Forward number Press C T MENU scroll to Net Service and press SELECT 2 Scroll to the type of call forwarding option you wish to set Call Forward Call Fwd Busy Call Fwd UnAns and press SELECT 3 Scroll to Settings and press SELECT to enter the number for forwarding 4 Press OK to confirm Activate Call Forward Press C MENU scroll to Net Service and press SELECT 2 Scroll to the type of call forwarding option you wish to set Call Forward Call Fwd Busy Call Fwd UnAns and press SELECT 3 Press SELECT to Activate The number string for that selected service will be dialled 5 When the number has been dialled press JA to retur
10. SELECT scroll to SMS Boxes and press SELECT Scroll to the SMS box you wish to delete and press C MENU Scroll to Delete Box and press SELECT Enter password if needed and press OK to confirm box deletion change the box number of an SMS Box only for UK Press C T MENU press SELECT to enter SMS scroll to SMS Settings and press SELECT scroll to SMS Boxes and press SELECT Scroll to the SMS box you for which wish to change the box number and press MENU Scroll to Change Box Nr and press SELECT Enter the new box number and press OK to confirm box number change To set outgoing number The incoming and outgoing numbers of your CD530 are already set to work on your country network We advise you not to modify these settings For more details or in case of any problems please contact your local network provider 2 Press 7 MENU press SELECT to enter SMS scroll to SMS Settings and press SELECT scroll to SMS Center I SMS Center 2 or SMS Center 3 and press SELECT Press SELECT to enter Outgoing Nr 31 EN 3 SMS Enter the number and press C ok to confirm A confirmation beep is emitted The maximum length of an outgoing number is 24 digits To set incoming number Press C T MENU press C SELECT to enter SMS scroll to SMS Settings and press C SELECT scroll to SMS Center I SMS Center 2 or SMS Center 3 and press C SELECT Scroll to Incoming Nr and press
11. SELECT and scroll to Delete and press C SELECT A long confirmation beep tone is emitted Delete all redial list Press DE in stand by mode 2 Press SELECT and scroll to Delete All and press SELECT 3 Press SELECT again to confirm A long confirmation beep tone is emitted 25 EN Write a SMS Inbox Draft box SMS Settings WD S stands for Short Message Service To benefit from this service you must subscribe to Caller Line dentification Service CLI together with SMS service from your network provider SMS messages can be exchanged with a phone mobile or compatible fixed lines provided the receiver has also subscribed to CLI and SMS services he factory settings on your CD530 correspond to the main national operator If you wish to send or receive S messages through another service provider you must set the corresponding numbers see page 31 our CD530 can store up to 50 SMS messages 40 SMS in the Inbox and 10 SMS in the Draft box shared by the SMS boxes and the maximum length of each message is 60 characters T S You can create up to 10 SMS boxes Box 0 to Box 9 and protect each box with a password only for UK Y a In order to send and receive SMS messages there must be at least one SMS Box Box 9 with empty password is created by default only for UK For more information please refer to SMS Box only for UK on page 30 Write and send new SMS Press MENU pres
12. To change Master PIN l Press C T MENU scroll to Advanced Set and press C SELECT scroll to Change PIN and press E SELECT Enter the current Master PIN when prompted and press T OK to confirm The PIN entered will be shown as asterisks on the screen If an incorrect PIN is entered Incorrect Pin will be displayed and the screen returns to stand by mode f your PIN number is the default 0000 step 2 is skipped Enter new PIN and press OK Enter new PIN again and press OK to confirm PIN change A confirmation tone is emitted the message New PIN Stored appears and the screen returns to previous menu If the Master PIN is modified you will be required to enter the Master PIN before you can modify Call Barring and Baby Call settings 43 EN Advanced Settings Reset Reset to default settings Press MENU scroll to Advanced Set and press SELECT scroll to Reset and press SELECT Enter the Master PIN when prompted and press EOK If your PIN number is the default 0000 step 2 is skipped Scroll to Yes and press C SELECT A confirmation beep is emitted and the unit is reset to its default settings please see Default settings on page 16 The WELCOME mode will appear again after master reset Auto Prefix The maximum length of an auto prefix number is 5 digits Once the number is set it will be automatically inserted at the beginning of each number that will be dialled
13. To set auto prefix number Press C T MENU scroll to Advanced Set and press C SELECT scroll to Auto prefix and press CF SELECT The last stored auto prefix number is displayed if any Enter the number and press C SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu Country Setting The availability of this menu is dependent on your country You can select another country different from the one chosen during Welcome mode 44 Press C T MENU scroll to Advanced Set and press SELECT scroll to Country and press E SELECT Enter the Master PIN when prompted and press ET OK to confirm You need to enter the Master PIN even if your PIN is 0000 default PIN Advanced Settings 3 Scroll to the country of your choice and press SELECT to confirm Once the country is selected the default line settings for the selected country will be applied to the phone automatically e g Recall time Dial mode Language etc Conference Mode When Conference mode is activated you can initiate a three party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress The default setting for this mode is Off To activate deactivate conference mode Press C T MENU scroll to Advanced Set and press SELECT scroll to Conference and press SELECT 2 Scroll to On or
14. base station does not have an ON OFF switch Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket The only way to power down the unit is to unplug the power adaptor from the electricity socket Therefore ensure that the electricity socket is easily accessible The power adaptor and telephone line cord have to be connected correctly as incorrect connection could damage the unit Always use the telephone line cord supplied with the unit Otherwise you may not get a dial tone EN aN Install Install battery Your CD530 is supplied with 2 rechargeable batteries allowing approximately up to 2 hours of talk time and up to 150 hours stand by time Before using the handset the batteries have to be installed and fully charged Slide out the battery cover 2 Charge battery Place the handset on the charging cradle of the base station A beep is emitted if the handset is placed correctly 2 A charging animation on the handset indicates that the battery is charging PHILIPS 3 Leave it there until the batteries are fully charged at least 24 hours 4 The handset is fully charged when the charging animation stops and Gal is displayed The handset must be charged for at least 24 hours before using it for the first time Install Battery life and range Talk time and stand by time When the battery is fully charged the talk
15. enter up to 24 digits for baby call number If you have modified the Master PIN before and it is not the default 0000 you will be required to enter the Master PIN before you can activate or deactivate Baby Call mode or change Baby Call number To activate Baby Call mode I Press MENU scroll to Advanced Set and press SELECT scroll to Baby call and press E SELECT Enter the Master PIN when prompted and press OK to confirm Press SELECT to enter Mode Scroll to On and press r OK to confirm When Mode is activated but the Baby Call number is not set yet your handset will prompt you to enter a number Enter the Baby Call number and press CF OK to confirm A confirmation message will be displayed on the screen To deactivate Baby Call mode I 2 Long press MENU when Baby Call mode has been activated before Scroll to Off and press C SELECT to confirm To change Baby Call number l OT gbo ok M Press C T MENU scroll to Advanced Set and press C SELECT scroll to Baby call and press SELECT Enter the Master PIN when prompted and press ET OK to confirm Scroll to Number and press C SELECT The last stored Baby Call number is displayed if any Enter the new Baby Call number and press CF ok to confirm A long confirmation beep is emitted and the screen returns to previous menu 4l Advanced Settings Registration The procedures described below are the procedures that yo
16. handset e The procedure to add a handset has failed e Maximum number of handsets e 5 has been reached e Base station is already busy e with another handset Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset see page 42 Remove and place back the handset batteries Unregister a handset so as to register the new handset Wait until it is available Noise interference on your radio or television Your CD530 base mains power pack are too close to electrical appliances station or Move the power pack or base station as far away as possible Caller Line Identification CLI service does not work The service is not activated Check your subscription with your network operat or No ring tone The ring tone is deactivated Increase the vol ume A phonebook entry cannot be stored The phonebook is full Delete an entry to free memory Cannot receive new SMS e SMS storage space is full Delete old SMS Wrong SMS settings Check your SMS settings see page 30 Cannot send or receive new The outgoing or incoming SMS Refer to SMS settings on page SMS center numbers are not set or 30 are wrong You have no subscription Another SMS enabled phone is also on your line There is a problem of compati bility between operators The identity is withheld Contact your p
17. menu Once the date and time are set there will be time amp date recovery when the batteries are removed or when there is a power failure Set Alarm Press MENU scroll to Clock amp Alarm and press SELECT scroll to Alarm and press SELECT 2 Scroll to Off On Once or On Daily and press SELECT 3 If you have selected On Once or On Daily enter the time for the alarm and press lt SELECT A confirmation beep is emitted and the screen returns to previous menu The alarm tone and alarm icon will only sound blink for minute when the alarm time is reached To mute the alarm tone simply press any key on the handset Alarm tone Press MENU scroll to Clock amp Alarm and press SELECT scroll to Alarm Tone and press Tf SELECT 2 Scroll 5 to the desired melody Melody Melody 2 or Melody 3 to play the melody 3 Press SELECT to set the alarm tone 33 Personal Settings Personal Set o Handset Tones Wallpaper Contrast Screensaver Handset Name Auto Pick up Auto Hang up Language Babysit Mode Handset Tones Ring Volume There are 5 ringer volume options Silence Low Medium High and Progressive The default level is Medium To set ring volume Press MENU scroll to Personal Set and press SELECT press C SELECT to enter Handset Tones and press SELECT again to enter Ring Volume 2 Scroll to your desired volume level and press SELECT to co
18. 2 35 Press in stand by mode Scroll 2 to a phonebook entry Press eL to dial the number TIP Instead of scrolling 5 to browse the phonebook entries press the numeric key corresponding to the first letter of the entry you wish to locate For example pressing 2 will show the entries starting with A Pressing again will show the entries starting with B etc Call Answer a call Whe n the phone rings press eL key Handsfree answering Whe n the phone rings press key Incoming call has priority over other events Whenever there is an incoming call other status in progress such as phone setting menu navigation etc will be aborted TIP If Auto Pick up mode see page 37 is activated you can simply lift up the handset from its base station to answer the call This feature is deactivated by default WARNING When the handset rings during an incoming call please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing End a call Press JA key The call duration will be displayed on the handset screen for about 5 seconds TIP If Auto Hang up mode see page 37 is activated you can simply place the handset back to its base station to end the call This feature is activated by default Calls in progress The following options are available during a call Adjust earpiece volume Mu I 2 Press to select from Volume to Volume 5 te unmute the h
19. 34 Ring Volume 34 S SMS 26 SMS Boxes 30 SMS Tone 35 SMS reception 30 SMS settings 30 Save redial list 25 Screensaver 36 Select Base 42 Send SMS 26 Stand by mode 14 Store a contact 2 Switch handset on off 14 T Text and number entry 16 Transfer an external call 19 Transfer phonebook 23 U Unmute 18 Unregister 43 v Voice Mail 47 W Wallpaper 36 Withhold ID 48 Write a SMS 26 53 PHILIPS Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2006 Koninklijke Philips Electronics N V All rights reserved www philips com 3111 285 26093 CE
20. 50 phonebook memories including 9 direct access memories GJ to 3 Each phonebook entry can have a maximum of 24 digits for the phone number and 2 characters for name Access phonebook Press in stand by mode or press C T MENU scroll to Phonebook and press C SELECT scroll to List Entry and press C SELECT 2 The phonebook entries will be listed in alphabetical order 3 Press 5 to browse the phonebook To view the details of a phonebook entry press VIEW To dial a number from the phonebook scroll 5 to the phonebook entry and press eL TIP Instead of scrolling to browse the phonebook entries you can press the numeric key corresponding to the first letter of the entry you wish to locate For example pressing 2 will show the entries starting with A Pressing EJ again will show the entries starting with B etc Store a contact in the phonebook Press EO MENU scroll to Phonebook and press SELECT press C SELECT to enter New Entry 2 Enter the name of the contact maximum 2 characters and press EOK 3 Enter the number maximum 24 digits and press OK 4 Enter the SMS Box number and press Cok only for UK 21 Phonebook 5 Scroll to choose a group lt No Group gt lt Group A gt lt Group B gt lt Group C gt and press C SELECT to confirm A long confirmation beep tone is emitted You can assign individual contacts to specific groups of your choice For example Group A contains
21. CT 2 Scroll 2 to your desired wallpaper and press SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu Contrast level There are 3 contrast level options Level Level 2 or Level 3 The default contrast level is Level 2 To set contrast level Press C T MENU scroll to Personal Set and press SELECT scroll to Contrast and press SELECT 2 Scroll to your desired contrast level Level Level 2 or Level 3 and press SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu Screensaver Screensaver will be activated automatically after minute in stand by mode To set screensaver Press amp MENU scroll to Personal Set and press SELECT scroll to Screensaver and press SELECT 2 Scroll to On or Off and press OK to confirm A confirmation beep is emitted and the screen returns to previous menu Handset Name You can name the handset and display the handset name in stand by mode The default handset name of your handset is PHILIPS To rename the handset Press q MENU scroll to Personal Set and press SELECT scroll to Handset Name and press SELECT 36 Personal Settings 2 Edit the handset name and press CF OK to confirm A confirmation beep is emitted and the screen returns to previous menu Maximum length of the handset name is 2 characters and the default handset name is PHILIPS Auto Pi
22. ELECT The handset numbers which are available for transfer will be displayed If there are more than 2 handsets you can scroll 2 5 to select a specific handset Press C SELECT to confirm The called handset will be prompted with a message Transfer from Handset X To accept the transfer of phonebook press 7 SELECT on the called handset to reject the transfer press CANCEL A message Transferred will be displayed upon successful completion 23 aN Call log The call log can store up to 50 entries If you have subscribed to Caller Line Identification CLI and provided the identity of the caller is not withheld the name or number of the caller will be displayed together with the date amp time of the call if provided by the network The calls missed and received are displayed in chronological order with the most recent call at the top of the list When the call log is empty the screen displays List Empty Access call log Press amp in stand by mode press C SELECT to enter Call Log and scroll 2 5 to view the entries Save call log entry to phonebook Press amp in stand by mode press C SELECT to enter Call Log and scroll 9 to select an entry Press SELECT and press SELECT again to Copy to Phbk Enter name and press OOK Edit number if necessary and press i OK Enter the SMS Box number and press G oK only for UK Scroll to choose a group lt No Group gt lt Group A gt l
23. MS box Your CD530 Overview of the base station Paging key Main features of your CD530 The following is an overview of the menu options that are available in your CD530 For detailed explanation of the menu options please refer to the corresponding sections in this User Guide Menu To Page SMS bx Setup write read SMS etc 26 PHONEBOOK ww Add edit and manage phonebook entries 2l CLOCK amp rae Set date and time alarm and alarm tone 33 ALARM z PERSONAL SET o Set Handset tone Wallpaper Contrast level Screensaver 34 Handset name Auto pickup Hang up Languages and Babysit mode ADVANCED Set Recall time Dial mode Call barring Baby call mode 39 SET j Register Unregister handset Select Base Change PIN Reset phone Auto prefix Country and Conference mode NET SERVICE Set Call forwarding Voice mail Call back Caller ID 46 GAMES Play games 49 EN Your CD530 Menu navigation The basic steps of navigating through the menus and options are as fol ows Task Action lllustration Enter main menu menu options Choose MENU by pressing the key directly below it left soft key ey Go to a option specific menu Confirm your selection Press key to scroll to your desired menu option 2 Choose SELECT by pressing the key directly below it left soft key ery SELECT In this example the alarm is On Once
24. Place the handset in the room to be monitored If the sound level around the microphone of the handset exceeds a certain threshold the handset can automatically call another handset registered on the same base station To use the Babysit feature you need to activate it e g on handset and enter the number of the handset to be called e g handset 2 in the event that there are noises in the monitored room Place the handset which is in Babysit mode e g handset in the room to be monitored If this handset detects a sound level greater than a certain threshold it will automatically initiate an internal call to the selected handset e g handset 2 To activate Babysit mode Press C T MENU scroll to Personal Set and press SELECT scroll to Babysit mode and press SELECT 2 Enter the number of the handset you wish to call to and press CF OK to activate In Babysit mode all keys are deactivated except for Ep key Babysit mode is displayed on the screen when this function is activated and the handset cannot make or receive calls To deactivate Babysit mode Press er select Off and press OK 38 Advanced Settings Advanced Set Recall Time Dial Mode Call Barring Baby call Registration Select Base Unregistration Change PIN Reset Auto prefix Country Conference Recall Time Recall time or dial delay is the time delay by which the line will be disconnected after you press eL key It can be se
25. age Refer to steps 5 to 7 in Write and send new SMS on page 26 to forward the message or select Save To Draft to save the message in the Draft box Save sender s phone number to phonebook l OY Oho AW NS While viewing the message content press MENU to display the Inbox menu options Scroll 2 to Copy to Phbk and press SELECT to enter a name for this new contact Enter the name and press OK to modify number To confirm the number press C ok again Enter the SMS Box number and press Cok only for UK Scroll 2 to select a group you wish to assign for this contact and press EF SELECT to confirm A long confirmation beep is emitted and the screen returns to display the message content Delete an Inbox message l 2 While viewing the message content press C MENU to display the Inbox menu options Scroll to Delete and press C SELECT to confirm deletion 28 SMS Delete all Inbox messages While viewing the message content press MENU to display the Inbox menu options 2 Scroll to Delete All and press SELECT 3 Press C SELECT again to confirm deletion Draft box In addition to SMS messages saved as drafts all the SMS messages that are not successfully sent will be automatically stored in the Draft box The Draft box can store up to 10 messages Review Draft messages Press MENU press C SELECT to enter SMS scroll to Draft box and press C SELECT 2 S
26. andset During a call press MUTE to turn off the microphone so that your correspondent cannot hear you Press UNMUTE to turn on the microphone Loudspeaker mode Press key to activate loudspeaker mode Call 2 Press key again to return to normal mode WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very high level Make sure the handset is not too close to your ear Adjust loudspeaker volume Press key to select from Volume to Volume 5 Intercom This feature is only available when there are at least 2 registered handsets It allows you to make free internal calls transfer external calls from one handset to another and use the conference option Intercom another handset To be able to use intercommunication feature you must have at least 2 handsets registered to your base station see page 42 To register an additional handset Press key in stand by mode 2 Intercom is established immediately if there are only 2 registered handsets If there are more than 2 regis tered handsets the handset numbers which are available for intercom will be displayed Press ALL to call all the handsets or press the handset number to select a specific handset e g press J to call handset 2 If the handset does not belong to CD530 535 range this function may not be available Transfer an external call to another handset Press key to put the external call on hold th
27. andset can register up to 4 different CD530 Base stations By default the handset will register to BASE If you select Any Base the handset will register to the nearest base station To manually select a base station Press MENU scroll to Advanced Set press SELECT scroll to Select Base and press SELECT 2 Scroll to the desired base station and press GCC ok to confirm 3 The handset will start searching for the base station If the selected base is found a long confirmation tone is emitted 42 Advanced Settings Unregistration To unregister a handset I Press U MENU scroll to Advanced Set and press SELECT scroll to Unregistration and press Tf SELECT Enter the Master PIN when prompted and press OK to confirm Press on the handset keypad the handset number corresponding to the handset that you wish to unregister If there are no key presses within 15 seconds the unregistration procedure will be aborted and the handset returns to stand by mode A long confirmation beep is emitted to indicate successful unregistration and the screen shows Unregistered Change Master PIN The Master PIN is used for setting call barring baby call number and for registration unregistration of handsets The default Master PIN number is 0000 The length of the PIN is 4 digits This PIN is also used to protect the settings of your handset Your handset will prompt you whenever the PIN is required
28. ck up This function enables you to answer a call automatically by simply lifting the handset from the base station By default the Auto Pick up feature is Off To set Auto Pick up mode Press C T MENU scroll to Personal Set and press SELECT scroll to Auto Pick up and press SELECT 2 Scroll to On or Off and press C SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu Auto Hang up This function enables you to end a call automatically by simply replacing the handset on the base station By default the Auto Hang up feature is On To set Auto Hang up mode Press C T MENU scroll to Personal Set and press SELECT scroll to Auto Hang up and press SELECT 2 Scroll to On or Off and press C SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu Language Your CD530 can support different display languages To change the language Press C T MENU scroll to Personal Set and press SELECT scroll to Language and press SELECT 2 Scroll 2 to your desired language and press SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu 37 EN Personal Settings Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature see page 42 To register an additional handset This feature allows you to monitor e g the baby s room
29. croll 5 to your desired box number and press SELECT only for UK 3 Enter the password and press Er ok Password is not required for Box 9 4 Browse the list of SMS messages and select the message you wish to review 5 Press view to view the message content 6 When viewing the message content you can press MENU to access the following options Send Send the message immediately Edit Edit the message and send or save as draft Delete Delete the message Delete All Delete all messages in the Draft box Send a message from Draft box While viewing the message content press C T MENU to display the Draft box menu options 2 Press SELECT to Send the message 3 Press SELECT again to confirm or scroll to Save as Draft to save the message in the Draft box and press SELECT 4 If you select Send the message will be sent immediately SMS Sent will be displayed if the message has been sent successfully Edit a Draft message While viewing the message content press MENU to display the Draft box menu options 2 Scroll to Edit and press C SELECT to start editing 3 After editing press OK to confirm message 4 Refer to steps 5 to 7 in Write and send new SMS on page 26 to send the message or select Save as Draft to save the message in the Draft box Delete a Draft message While viewing the message content press CT MENU to display the Draft box menu options 29 EN SMS
30. d the message will be sent immediately SMS Sent will be displayed if the message has been sent successfully If the message cannot be sent successfully the screen will display SMS not Sent and the message will be saved in the Draft box WARNING When composing your SMS if no keys are pressed for 60 seconds the handset will return to stand by mode The edited message will be automatically saved in the Draft box Inbox The messages in the Inbox are listed according to the time of receipt with the newest message appearing first The Inbox can store up to 40 messages shared between Box 0 to Box 9 Each time an SMS is received you will be alerted by a beep tone see SMS Tone on page 35 and the screen displays the number of new messages received If LED is activated the event LED will blink until the SMS has been reviewed WARNING When the message box is full you will not be able to receive new messages In this case you need to delete some old messages in order to receive new ones View Inbox messages Press C T MENU press SELECT to enter SMS scroll to Inbox press SELECT 2 Scroll 5 to your desired box number and press SELECT only for UK 3 Enter the password and press Er oK Password is not required for Box 9 4 Browse the list of SMS messages and select the message you wish to read The message list will be displayed with the senders phone number or corresponding name if the number matches the
31. e caller can no longer hear you 2 Intercom is established immediately if there are only 2 registered handsets If there are more than 2 regis ered handsets the handset numbers which are available for intercom will be displayed Press ALL to call all the handsets or press the handset number to select a specific handset e g press J to call handset 2 The called handset rings f there is no answer from the called handset press key to resume the external call 3 Press key on the called handset to answer the internal call where both internal callers can talk 4 Press 4 key on the first handset to transfer the external call to the called handset Switch between an internal and external call Press key once to switch between an internal call and external call EN Call Three party conference call The conference call feature allows one external call to be shared with two handsets in intercom The three parties can share the conversation and no network subscription is required Press to put the external call on hold the caller can no longer hear you 2 Intercom is established immediately if there are only 2 registered handsets If there are more than 2 regis tered handsets the handset numbers which are available for establishing a conference call will be displayed Press ALL to call all the handsets or press the handset number to select a specific handset e g press GJ to call handset 2 The cal
32. e group for which you wish to set melody and press SELECT 3 Scroll 5 to the desired melody to play the melody 4 Press SELECT to set the group melody A confirmation beep is emitted and the screen returns to previous menu Key Beep A single beep is emitted when a key is pressed You can enable or disable this key beep By default the key beep is On To set key beep On Off Press MENU scroll to Personal Set and press SELECT press C SELECT to enter Handset Tones scroll to Key Beep and press SELECT 2 Scroll to On or Off and press C SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu SMS Tone A tone is emitted when a new SMS is received You can enable or disable this SMS Tone By default SMS tone is On To set SMS tone On Off Press C T MENU scroll to Personal Set and press SELECT press SELECT to enter Handset Tones scroll to SMS Tone and press SELECT 2 Scroll to On or Off and press C SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu 35 Personal Settings Wallpaper This feature allows you to select the wallpaper to be displayed in stand by mode There are 4 wallpapers pre installed on your phone Please see Default settings on page 6 for the default wallpaper To set wallpaper Press C T MENU scroll to Personal Set and press SELECT scroll to Wallpaper and press SELE
33. ess C T MENU scroll to Net Service and press SELECT scroll to Withhold ID and press Z SELECT 2 Scroll to Settings and press SELECT 3 Enter the required number for withholding ID and press EOK Activate Withhold ID Press MENU scroll to Net Service and press SELECT scroll to Withhold ID and press SELECT 2 Press e SELECT to Activate 3 The number string for that selected service will be dialled 4 When the number has been dialled press J to return to stand by mode Deactivate Withhold ID Press C MENU scroll to Net Service and press SELECT scroll to Withhold ID and press SELECT 2 Scroll to Deactivate and press C SELECT to confirm 3 The number string for that selected service will be dialled 4 When the number has been dialled press JA to return to stand by mode 48 Games Games Memory Memory The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory To win you have to complete matching all 8 pairs of graphics in a 4x4 matrix To start the game Press MENU scroll to Games and press SELECT press SELECT to enter Memory game 2 An instruction screen is displayed Press 2 3 8 8 keys to move up down left right respectively Press 3J to select 3 Press Cf SELECT or press 3 to start the game 4 To exit from the game press 49
34. gits If you have modified the Master PIN before and it is not the default 0000 you will be required to enter the Master PIN before you can activate or deactivate call barring mode add or modify call barring number To activate deactivate Call Barring mode Press f MENU scroll j to Advanced Set and press C SELECT scroll 8 to Call Barring and press C SELECT 2 Enter the Master PIN when prompted and press OK to confirm 3 Press f SELECT to enter Barring Mode 4 Scroll to On or Off and press SELECT to confirm A confirmation tone is emitted and the screen returns to previous menu To modify Call Barring number Press C T MENU scroll to Advanced Set and press SELECT scroll to Call Barring and press E SELECT Enter the Master PIN when prompted and press ET OK to confirm Scroll to Barring Number and press C SELECT Scroll to Number I Number 2 Number 3 or Number 4 and press SELECT to confirm Enter a maximum of 4 digits and press CF OK to confirm A confirmation beep is emitted and the screen returns to stand by mode ON Be Uh If a restricted number is dialled the call will not be connected When this happens the phone emits an error tone and returns to stand by mode 40 Advanced Settings Baby Call When activated the Baby Call feature enables you to dial a number by pressing any key on your handset This feature is very useful for direct access to emergency services You can
35. ith empty password is created by default You can create a maximum of 10 SMS boxes Box 0 to Box 9 and you can protect each box with a password To create a new SMS Box only for UK Press f MENU press SELECT to enter SMS scroll to SMS Settings and press SELECT scro to SMS Boxes and press SELECT 2 Press f MENU and press SELECT to Add New Box 30 3 4 SMS Enter box name maximum 2 characters and press EOK Enter a password maximum 8 digits and press EOK Enter the password again and press Grok You can choose to leave the password empty If no password is required simply press ETOK when prompted to enter password Enter the SMS box number and press C ok If the confirmation password is correct the new SMS box will be created A long confirmation beep is emitted and the screen returns to SMS box list change the password of an SMS Box only for UK Press C T MENU press C SELECT to enter SMS scroll to SMS Settings and press SELECT scroll to SMS Boxes and press SELECT Scroll 25 to the SMS box for which you wish to change password and press SELECT Scroll to Change Passwd and press SELECT Enter old password and press OK Enter new password press T OK and enter the new password again for confirmation Press OK to confirm password change delete an SMS Box only for UK Press MENU press C SELECT to enter SMS scroll to SMS Settings and press C
36. led handset rings 3 Press eL key on the called handset to answer the internal call where both internal callers can talk 4 Press CONF soft key on the first handset to start the three party conference TIP If Conference mode is activated see page 45 a three party conference call is automatically established if the second handset takes the line when there is already an external call in progress Call waiting If you have subscribed to Call Waiting service the earpiece will emit a beep tone to inform you that there is a second incoming call The number or name of the second caller will also be displayed if you have subscribed to Caller Line Identification service CLI Please contact your network provider for more information on this service To answer the second call press CRTE may be different according to your network Caller Line Identification Caller Line Identification CLI is a special service that you may subscribe from your network operator If you have subscribed to CLI service and provided the identity of the caller is not withheld the number or name of the caller if stored in the phonebook will be displayed when the phone rings so that you may decide whether to answer the call or not Please contact your network provider for more information on this service 20 Phonebook Phonebook 4 New Entry List Entry Edit Entry Delete Entry Delete All Direct Memory Phbk transfer Your CD530 can store up to
37. lock and unlock the keypad in stand by mode Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries Press key on the base until the handset starts to ring Once retrieved press to end the paging Install Stand by mode If the handset is idle for 30 seconds in settings mode review mode edit mode etc it will automatically return to stand by mode It will also return to stand by mode automatically when the handset is placed back on the base station Screen and keypad backlight The backlight remains on for 20 seconds after each activation such as an incoming call key presses lifting up the handset off the base station etc The color of the keypad backlight is AMBER Event LED If you have subscribed to Caller Line identification the event LED on your handset blinks when there is a new event such as a new call a new SMS or a new voice mail message Text and number entry Key Assignment CL space 1 _ lt gt amp 28 abc2aacae 2 def3 2A ghi4 r E jkl5a amp mno6 2 pqrs7BHOE ES tuv8 2 wxyz9oQEWP Lo 0 725 85 1i2 A For example to enter the name Philips Press L2J once P 2 Press 8J twice Ph 3 Press 8 three times Phi 4 Press LE three times Phil 5 Press J three ti
38. mes Phili 6 Press J once Philip aN Install 7 Press 2 four times Philips By default the first letter of a word is in upper case Press to switch between upper and lower case Default settings Ringer Volume Medium Earpiece Volume Volume 3 Speaker Volume Volume 3 Key Beep On Wallpaper 4 SJ Contrast Level 2 Screensaver On Auto Pick up Off Auto Hang up On Babysit mode Off Alarm clock Off Barring mode Off SMS reception On Master PIN 0000 Call Make a call Predialling l 2 Enter the phone number maximum 24 digits Press to dial the number Direct dialling I 2 Press amp or to take the line Enter the phone number Call from redial list l 2 3 Press in stand by mode Scroll to an entry in the redial list Press eL to dial the number TIP The handset stores the last 20 numbers dialled The last number dialled will appear first in the redial list If the redial number matches a phonebook entry the name will be displayed instead Call from the call log 2 3 Press amp in stand by mode Press C SELECT to enter call log Scroll 2 to an entry in the call log Press L to dial the number You need to subscribe to Caller Line Identification service to be able to see the caller s number or name in the call log See Call log on page 24 for details Call from the phonebook I
39. n internal call Answer an incoming call in handsfree mode Activate and deactivate the loudspeaker during a call Dial in stand by mode Long press to mute the ringer in stand by mode Insert a pause in dialling mode Switch between upper and lower case in editing mode g Dial in stand by mode Long press to activate and deactivate keypad lock Soft key DE BACK Short press from menu browsing to return to the previous menu WARNING Handsfree activation can suddenly increase the volume in the earpiece to a very high level Make sure the handset is not too close to your ear EN Your CD530 Display icons amp symbols In stand by mod e several icons amp symbols may be displayed on the handset The handset is registered and within range of the base station It blinks when the handset is in l out of range or is searching for a base E Battery symbol indicating 3 different battery levels The ringer volume is set to zero There is an external incoming call an external call is connected or an external call is held E E E There is an internal incoming call an internal call is connected or an internal call is held Il The loudspeaker is ON Alarm clock is activated E amp Blinks when there is a missed call or when new SMS or voicemail messages are received and not read yet Steady when there are received SMS messages in the S
40. n to stand by mode When this feature is activated depending on the call forwarding option you have set your incoming calls will be forwarded to the number of your choice Deactivate Call Forward Press MENU scroll to Net Service and press SELECT 46 Network Services Scroll 5 to the type of call forwarding option you wish to set Call Forward Call Fwd Busy Call Fwd UnAns and press SELECT Scroll 9 to Deactivate and press SELECT to confirm The number string for that selected service will be dialled When the number has been dialled press JA to return to stand by mode Voice Mail This feature allows the caller to leave a voice message when you are unable or do not wish to take a call yourself The availability of this feature is dependent on your country and your subscription with your network provider Charges often apply for you to retrieve messages as these are stored by the network rather than on the handset itself Contact your network provider for more information about this feature Set up Voice Mail number 2 3 4 Press C T MENU scroll to Net Service and press C SELECT scroll to Voice Mail and press SELECT Scroll to Voice Mail or Voice Mail 2 and press SELECT Scroll to Settings and press SELECT odify the voice mail number and press OK Activate Voice Mail Z 3 4 oF Press MENU scroll to Net Service and press SELECT scroll to Voice Mail a
41. nd press SELECT Scroll to Voice Mail or Voice Mail 2 and press C SELECT C SELECT to Activate The number string for that selected service will be dialled When the number has been dialled press JA to return to stand by mode Press Call Back Setting 2 3 Activate Call Back I 3 Press C MENU scroll to Net Service and press SELECT scroll to Call Back and press SELECT Scroll to Settings and press SELECT Enter the required number for call back and press OK Press MENU scroll to Net Service and press SELECT scroll to Call Back and press SELECT Press SELECT to Activate The number string for that selected service will be dialled 47 EN Network Services 4 When the number has been dialled press JA to return to stand by mode Cancel Call Back Setting Press MENU scroll to Net Service and press SELECT scroll to Cancel Call Bk and press SELECT 2 Scroll to Settings and press SELECT 3 Enter the required number for cancelling of call back and press EOK Activate Cancel Call Back Press MENU scroll to Net Service and press SELECT scroll to Cancel Call Bk and press SELECT SELECT to Activate 2 Press 3 The number string for that selected service will be dialled 4 When the number has been dialled press JA to return to stand by mode Withhold ID Setting Pr
42. ne cord Warranty card Your CD530 Overview of the handset Earpiece LCD Screen Up Down Navigation keys Event LED Left Soft key Right Soft key Talk key Hang up key Alphanumeric keypad Keypad lock key Case key Pause key Ringer off key Loudspeaker key ________ Intercom key Microphone Your CD530 Handset keys To Enter the main menu from stand by mode Select the function displayed on the handset screen directly above it Activate mute function during a call Go to redial list from stand by mode Select the function displayed on the handset screen directly above it Answer an incoming external or internal call Insert R for operator services when on the line Hang up a call Long press from menu browsing to return to stand by mode short press to return to previous menu Long press in stand by mode to switch off the handset short press to switch on the hand set again Access call log from stand by mode Scroll up a menu list or go to the previous phonebook or call log record Increase earpiece volume during a call Go to the previous character in editing mode Access phonebook from stand by mode Scroll down a menu list or go to the next phonebook or call log record Decrease earpiece volume during a call Go to the next character in editing mode Initiate a
43. nfirm A confirmation beep is emitted and the screen returns to previous menu When Silence is activated the icon ai is displayed on the screen WARNING When the handset rings during an incoming call please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing Ring Melody There are 10 ring melodies available on your handset To set Ring Melody Press MENU scroll to Personal Set and press SELECT press C SELECT to enter Handset Tones scroll to Ring Melody and press SELECT 2 Scroll 2 to your desired melody to play the melody 34 Personal Settings 3 Press C SELECT to set the ring melody A confirmation beep is emitted and the screen returns to previous menu Group Melody To benefit from this feature you must subscribe to the Caller Line Identification service See Caller Line Identification on page 20 This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group You can associate ring melody to each group There are three phonebook groups Group A B C available for you to organize your contacts Each group can be assigned a unique melody To set Group Melody Press MENU scroll to Personal Set and press SELECT press SELECT to enter Handset Tones scroll to Group Melody and press SELECT 2 Scroll to th
44. phone numbers of all your co workers You can also assign a specific ring melody to that group see Group Melody on page 35 If you have subscribed to Caller Line Identification service from your network provider every time someone from that group calls you you will hear the designated ringtone for that group TIP You can store up to 50 phonebook entries You cannot store a new phonebook entry when the memory is full In this case you have to delete existing entries to make space for new entries Edit a phonebook entry Press MENU scroll to Phonebook and press SELECT scroll to Edit Entry and press SELECT Scroll 2 to the entry you wish to edit and press SELECT Press CLEAR to erase the letters one by one edit the name and press OK Press CLEAR to erase the digits one by one edit the number and press OK Enter the SMS Box number and press tG oK only for UK Scroll o a group lt No Group gt lt Group A gt lt Group B gt lt Group C gt and press UOK to confirm so a ee E A long confirmation beep tone is emitted Delete a phonebook entry Press C T MENU scroll to Phonebook and press SELECT scroll to Delete Entry and press SELECT 2 Scroll to the entry you wish to delete and press SELECT A long confirmation beep tone is emitted Delete all phonebook entries Press MENU scroll to Phonebook and press SELECT scroll to Delete All and press
45. phonebook record 5 Press C VIEW to view the message content TIP While reading an SMS press 5 to scroll to the next or previous row At the end of the message the sender s phone number and the date and time of reception are shown 27 EN SMS 6 When viewing the message content you can press MENU to access the following options Reply Send a reply to the sender of the message Edit Forward the message to another recipient Copy to Phbk Save the sender s number to your phonebook Delete Delete the selected message Delete All Delete all messages in the Inbox 7 To return to SMS menu press JA Press amp while viewing the message content sender number date time stamp will abort the SMS function and dial the sender s phone number Press to return to Inbox message list Reply to an Inbox message 2 3 4 While viewing the message content press MENU to display the Inbox menu options Scroll 2 to Reply and press EF SELECT to start editing After editing press OK to confirm the message Refer to steps 5 to 7 in Write and send new SMS on page 26 to send the message or select Save as Draft to save the message in the Draft box Forward an Inbox message 2 3 4 While viewing the message content press C T MENU to display the Inbox menu options Scroll to Edit and press C SELECT to start editing it if you wish After editing press CF ok to confirm mess
46. product in places where there are explosive hazards Do not let small metal objects come into contact with the product This can deteriorate audio quality and damage the product About operating and storage temperatures Operate in a place where temperature is always between 0 and 35 C 32 to 95 F Store in a place where temperature is always between 20 and 45 C 4 to 13 F Battery life may be shortened in low temperature conditions Installation requirements This product requires an electrical supply of 220 240 volts alternating monophased power excluding IT installations defined in standard EN 60 950 In case of power failure the communication can be lost The electrical network is classified as hazardous according to criteria in the standard EN 60 950 The only way to power down this product is to unplug the power supply unit from the electrical outlet Ensure the electrical outlet is located close to the apparatus and is always easily accessible The voltage on the network is classified as TNV 3 Telecommunication Network Voltages as defined in the standard EN 60 950 Need Help For more information on troubleshooting and FAQs Troubleshooting page 50 Online Help www p4c philips com What s in the box The following accessories are included with your CD530 Handset Power supply for base station 2 AAA Battery door User Guide Quick Start rechargeable Guide batteries Li
47. rovider for more information Deactivate the SMS reception mode on one of the device Contact your provider for more information Show identity see Withhold ID on page 48 5I Information Electric Magnetic and Electromagnetic alee EMF Philips Royal Electronics manufactures and sells many consumer oriented products which usually as with any electronic apparatus have the ability to emit and receive electro magnetic signals 2 One of Philips leading Business Principles is to take all necessary health and safety precautions for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products 3 Philips is committed to develop produce and market products that cause no adverse health effects 4 Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today 5 Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in tts products Conformity The Declaration of conformity is available on www p4c philips com Hereby Philips Consumer Electronics BLC P amp ACC declares that the CD530x is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Recycling and disposal
48. s SELECT to enter SMS press SELECT again to enter Write a SMS 2 Scroll 9 to the desired SMS Box Box 0 to Box 9 and press SELECT to enter password only for UK 3 Enter the password if needed and press UOK Key Operation A Press to move cursor left by position z Press and hold to jump to the Ist character digit m Press to move cursor right by position v Press and hold to jump to the last character digit Press to erase the previous character digit JcLeAR Press to return to the previous menu if there are no characters digits on the input screen Long press to delete all characters digits 4 Enter the text and press CC OK You can enter up to 160 characters for an SMS If you receive a call while writing an SMS the operation will be interrupted However your SMS will be saved in the Draft box To retrieve it go to Draft box in your SMS menu see page 29 26 SMS r 5 Enter the destination phone number and press CC oK Or press PHBK to browse the phonebook list to select a phone number press SELECT and press CC OK 6 Enter the destination box number 0 to 9 directly and press OK only for Uk By default the destination box is 9 the default destination box depends on the country 7 Press SELECT to Send the message or scroll to Save as Draft to save the message in the Draft box and press SELECT to confirm 8 If you select Sen
49. t Group B gt lt Group C gt and press f SELECT to confirm A long confirmation beep tone is emitted oD OB W S Delete call log entry Press amp in stand by mode press SELECT to enter Call Log and scroll 9 to select an entry 2 Press SELECT and scroll to Delete 3 Press SELECT to confirm A long confirmation beep tone is emitted Delete all call log Press amp in stand by mode press C SELECT to enter Call Log 2 Press SELECT and scroll to Delete All and press SELECT 3 Press f SELECT again to confirm A long confirmation beep tone is emitted Access redial list Press in stand by mode and scroll to view the entries 24 Call log View details of a redial list entry Press in stand by mode and scroll to select an entry 2 Press SELECT and press SELECT again to View Save redial list entry to phonebook Press Do in stand by mode and scroll to select an entry Press SELECT scroll to Copy to Phbk and press SELECT Enter name and press OK Edit number if necessary and press i OK Enter the SMS Box number and press G oK only for UK Scroll to choose a group lt No Group gt lt Group A gt lt Group B gt lt Group C gt and press f SELECT to confirm A long confirmation beep tone is emitted Os Ge AR OO Na Delete a number from redial list Press Sy in stand by mode and scroll to select an entry 2 Press C
50. t to short medium or long The default value of recall time that is preset in your CD530 should be the best suited for your country network and therefore you should not need to change it To set recall time Press MENU scroll to Advanced Set and press SELECT and press C SELECT to enter Recall Time 2 Scroll to select Short Medium Long and press SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu This setting is useful when using network services The use of some services accessed with ee ae L e HMA El a GJ call waiting call forward will depend on your recall time setting Please contact your network provider for more details on this feature 39 Advanced Settings Dial Mode The default value for dial mode that is preset in your CD530 should be the best suited for your country network and therefore you should not need to change it There are 2 dial modes Tone or Pulse To set dial mode Press MENU scroll to Advanced Set and press SELECT scroll to Dial Mode and press SELECT 2 Scroll to Tone or Pulse and press SELECT to confirm A confirmation beep is emitted and the screen returns to previous menu Call Barring Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain numbers You can set up to four different barring numbers with each number containing up to 4 di
51. time of your CD530 is approximately 12 hours and the stand by time is approximately 150 hours Low battery warning The battery level is shown at the top left of the handset screen When the battery level becomes low the low battery sensor alerts you by sounding an audible tone and blinking the battery icon If the battery level becomes exceedingly low the phone automatically switches off shortly after the alert and any function in progress will not be saved The approximate power levels of your battery are indicated as follows Battery is fully charged 3 bars in the battery icon Battery is partially charged 2 bars in the battery icon Battery is running low bar in the battery icon Battery is fully discharged O bar in the battery icon IO t el a Out of range warning The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively When the handset moves beyond operation range the antenna icon FF will blink Configure your CD530 Before you use your CD530 you need to configure it according to the country of use After charging it for a few minutes the WELCOME screen appears Follow these steps to configure your phone Press any key to display the list of countries Scroll 2 to your country Press SELECT to confirm your selection Scroll 2 to your operator if necessary Press SELECT again to confirm your selection A a ood The default line settings and men
52. u language for the selected country will be automatically configured You can still make outgoing calls or receive incoming calls without first defining your country selection Depending on your country the WELCOME screen may not appear In this case you are not required to select your country operator language settings EN Install Set date and time Press MENU Scroll to Clock amp Alarm and press SELECT Press C SELECT to enter Set Date Time Enter current time HH MM and current date DD MM YY and press E SELECT Boe WARNING If your phone is connected to an ISDN line through an adaptor the date amp time may be updated after each call The availability of date amp time update is dependent on your network provider Please check the date amp time settings in your ISDN system or contact your network provider Now you are ready to use your phone Basic operations of your CD530 Make a call Enter the phone number maximum 24 digits and press amp to dial the number For details please refer to Make a call on page 17 Answer or end a call Press EL key to answer a call Press JA key to end a call For details please refer to Answer a call and End a call on page 18 Switch the handset on off Press and hold JA key for 5 seconds to switch off the handset in stand by mode Short press JA key to switch on the handset again Keypad lock unlock Press and hold key for 2 seconds to
53. u will find in your CD530 handset The procedures may vary according to the handset you want to register In this case please refer to the manufacturer of the additional handset Additional handsets must be registered to the base unit before you can use them Up to 5 handsets can be registered to one base station The Master PIN is required before you can register or unregister handsets The default PIN is 0000 To register an additional handset On the base station press and hold for 3 seconds in stand by mode After that the registration procedure has to be done within minute Within minute the base station is able to accept registration from a handset If no key is pressed within 10 seconds the registration procedure will be aborted 2 At the same time on the handset press C MENU scroll to Advanced Set and press SELECT scroll to Registration and press SELECT 3 Enter the Master PIN when prompted and press OK to start registration 4 Press to select the Base to be registered to and press CF OK to confirm If the base is found and the PIN is correct the unused handset numbers will be displayed and you can select a handset number by entering the number directly If the PIN is incorrect Incorrect PIN will be displayed and the handset returns to stand by mode A long confirmation tone is emitted to indicate successful registration and the screen returns to stand by mode Select Base One CD530 h

Philips Cordless telephone CD5301S

Contents

Download Pdf Manuals

Related Search

Related Contents