Home

IT Management Suite 7.1 SP2 MP1 Rollup Version 11 Release Notes

1. 3 Verify that Task Service Upgrade x64 or Task Service Upgrade x86 is enabled and that it targets correct task servers Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgrade policies or create new ones and use the desired filter or target IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 14 Installing or upgrading Inventory Solution Installing or upgrading Inventory Solution Installation Prerequisite Inventory Solution 7 1 SP2 MP1 To install or upgrade Inventory Solution 1 Copy the files in ITMS7_1_ SP2 MP1 Rollup v11 _Dec15 2014 zip file onto the hard drive of the Notification Server computer Caution Do not extract the rollup binaries to the Altiris folder Caution The PFinstaller2 utility should be located in the folder to which the files from the archive were extracted Open the folder to which the files from the archive were extracted Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked In the pop up window that opens choose to delete or keep the archive To install the assemblies that are required for this rollup check Inventory uncheck all other options and then click Install All the existing files are replaced with the newer ones The rollup installation may take a few minutes to finish
2. 1 In the Symantec Management Console on the Settings menu click All Settings In the left pane expand Agents Plug ins gt Discovery and Inventory gt Windows UNIX Linux Mac and then click Application Metering Plug in for Windows Install or Application Metering Plug in for Windows Upgrade Roll out the policy to Windows based client computers When the client computer receives the policy the Application Metering Agent is upgraded Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgrade policies or create new ones and use the desired filter or target To activate the policy you must first upgrade the Symantec Management Agent on the client computers otherwise the client computers are not targeted properly Rollup v11 does not contain any new fixes for Inventory Packs for Servers plug in If you updated Inventory Pack servers plug in to version 7 1 7870 with Rollup v6 installation you do not need to upgrade this plug in after Rollup v11 installation IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 16 Installing or upgrading Asset Management Solution To install or upgrade the Inventory Pack for Servers plug in that is provided in this rollup version 7 1 7870 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Agents Plug ins gt
3. IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes symantec IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Legal Notice Copyright 2014 Symantec Corporation All rights reserved Symantec the Symantec Logo the Checkmark Logo and are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U S and other countries Other names may be trademarks of their respective owners The product described in this document is distributed under licenses restricting its use copying distribution and decompilation reverse engineering No part of this document may be reproduced in any form by any means without prior written authorization of Symantec Corporation and its licensors if any THE DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS REPRESENTATIONS AND WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT ARE DISCLAIMED EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING PERFORMANCE OR USE OF THIS DOCUMENTATION THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE Symantec Corporation 350 Ellis Street Mountain View CA 94043 http Awww symantec com Printed in the United States of America Legal Notice Copyright
4. Server continued 2972447 CPU spikes to a sustained 100 and does not relent until ISRESET and N A Altiris service are cycled Improve performance when you update large collections 2973792 Report_Print function has a broken icon N A 2973771 Report Data Snapshot Purging tab does not load correctly N A 2773288 Building of Data Containers for replication takes a long time and sometimes N A times out due to use of ItemResource view 2973746 Replicated security account under account management becomes disabled N A if edited 2973845 SMA Agent does not update basic inventory when IP of managed computer N A is changed 2763086 In large Enterprise environments 70k resources 100 sites and 1k N A subnets Filters which the AD Site imports automatically created time out during collection updates 2981593 Delta Resource Membership Update does not refresh the filters that have N A recently been replicated 3008306 Symantec Administrator does not see targets a custom user created N A 2972827 Issue with spGetAccountinternalDetails on Chinese language Notification N A Server Table 1 60 Fixed issues for Task Server 2762901 Tasks that emulate user contexts do not complete successfully though they N A can complete when that user is logged on 2974038 Key violation duplicate resource key is found in task server list N A 2974053 Max timeout is unlimited on DS 6
5. The detection rule Registry key value fails on Windows 2003 64 bit computers N A 40 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v7 Table 1 21 Fixed issues for Software Management Framework continued 3185980 If a scroll bar is used while a package server is manually selected for a N A software package all selections are removed 3260402 inv_installedsoftware and inv_addremoveprogram data classes are not N A populated after Full Inventory 3311274 Symantec Management Agent could be unresponsive when local cache is N A large 3203642 Deleted command line still can be requested through Software Portal if it N A was once published Table 1 22 Fixed issues for Monitor Solution 3208972 Processor and System Health and Tuning policies cause high CPU N A utilization for AEXMETRICPROV EXE 2944988 IAS based NT Events cause AexMetricProvider to crash N A Fixed issues in Rollup v7 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v7 If additional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixed issues are separated into the following IT Management Suite products and components Symantec Management Platform Notification Server See Table 1 23 on page 42 a Task Server See Table 1 24 on page 43
6. gt DeleteOrphanReplicationltems Note If you have a significant number hundreds of thousands of replicated items running these scripts can take a longer time to finish In most cases it should take a few minutes Running the pe1etepuplicatedsubnets SCript A DeleteDuplicatedSubnets script is available with this rollup The purpose of this script is to remove unnecessary copies of subnets which may appear if the same subnets were reassigned to a site manually This script finds all the subnets with missing resource keys If duplicate subnets are found with the same IP address the script deletes only those subnets All the deleted subnets are logged in the subnet 1log file which is created in the directory with the script after execution IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 10 Installing or upgrading the Symantec Management Platform SMP To run the DeleteDuplicatedSubnets script 1 Copy the files in ITMS7_ 1 SP2 MP1 Rollup v11 Dec15_ 2014 zip file onto the hard drive of the Notification Server computer Expand SMP gt Other gt DeleteDuplicatedSubnets 3 Right click PFInstaller2 click Run as administrator and then accept the UAC User Account Control prompt In the pop up window that opens click Install Files After these scripts complete restart Notification Server Activities Note For customers with a significant number of duplicated subnets running these scripts can take
7. 2 Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 25 Reverting the Symantec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided by the Rollup Check Inventory uncheck all other options and then click Uninstall This uninstall reverts Inventory Solution to the 7 1 SP2 MP1 version on the Notification Server computer Warning This installation restarts Altiris Services and Web services To uninstall the updated Inventory Solution Inventory Pack for Servers and Application Metering Agents provided with this rollup 1 In the Symantec Management Console on the Settings menu click All Settings In the left pane expand Agents Plug ins gt Discovery and Inventory gt Windows UNIX Linux Mac and the click Symantec Management Agent for indows UNIX Linux Mac Uninstall Enable the Uninstall policy for each of the agents Schedule the Install policy to install the default Agent versions on the client computers To uninstall the updated Symantec Management Agent SMA provided with this rollup 1 In the Symantec Management Console on the Settings menu click All Settings In the left pane expand Agents Plug ins gt Symantec Management Agent gt Windows and then click Symantec Management Agent for Windows Uninstall Enable the policy Schedu
8. 3650672 In IT Management Suite v10 the Agent crashes N A IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v11 Table 1 3 Fixed issues for Notification Server continued 3630251 Symantec Management Agent service may crash on startup N A 3597714 The Symantec Management Agent push installation may fail TECH215785 3654601 Gathering WMI information caused memory leak leading to out of memory N A errors 3597717 High CPU usage on the Notification Server computer when a client computer TECH223425 requests new Agent configuration 3607649 Active Directory Import task imports computers from Organizational Units N A that are not specified in the import rule 3597710 After an upgrade from 7 1 on a Windows XP SP3 x86 computer an XML N A DOM error occurs and the Managed Delivery policies with Detection check hang until the Agent is restarted 3615912 It is impossible to add a CSV file as a source of inclusions or exclusions to N A a filter 3646529 The SSL protocol 3 0 as used in OpenSSL through 1 0 1i and other products N A uses nondeterministic CBC padding which makes it easier for man in the middle attackers to obtain cleartext data via a padding oracle attack aka the POODLE issue Table 1 4 Fixed issues for Task Server 3364117 When the Update Summary Data task runs an exception occurs N A 3566235 An updated software package is no
9. A 3026427 Tasks execute while the client workstation is not fully configured during N A MiniSetup and then are terminated on a forced restart 3118106 When you restore a Ghost image to a new type of PC Lenovo ThinkPad X1 N A Carbon the image restore always fails when the Ghost executable from Altiris is used See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 52 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 53 Fixed issues in Rollup v4 Fixed issues in Rollup v4 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v4 If additional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixed issues are separated into the following IT Management Suite products and components Symantec Management Platform Notification Server See Table 1 43 on page 53 a Task Server See Table 1 44 on page 54 a Asset Management Solution See Table 1 45 on page 55 Data Connector See Table 1 46 on page 55 a Inventory Solution See Table 1 47 on page 55 a Software Management Framework See Table 1 48 on page 55 a Deployment Solution See Table 1 49 on page 56 The fixes that were included in Rollup v3 v2 and v1 are also included in this release See Fixed issues in Rollup v3 on page 56 See Fixed issues
10. Agent on your package server 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Notification Server gt Site Server Settings gt Package Service gt Advanced gt Windows and then click Windows Package Server Agent Upgrade 3 Verify that the Windows Package Server Agent Upgrade is enabled and that it targets the correct package server or servers Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgrade policies or create new ones and use the desired filter or target To activate the policy you must first upgrade the Symantec Management Agent on the client computers otherwise the client computers are not targeted properly Upgrading remote task servers Installation Prerequisite Symantec Management Platform 7 1 SP2 MP1 1 7 1 8400 If you have upgraded the remote task server to version 7 1 8480 with Rollup v10 you do not need to upgrade the remote task server after installing Rollup v11 To upgrade the remote task server you need to use the standard TS upgrade policy To upgrade remote task servers 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Notification Server gt Site Server Settings gt Task Service gt Advanced and then click Task Service Upgrade x64 or Task Service Upgrade x86
11. Center 3021941 The CMDB right click gt Assign Location function fails to assign a location N A 3035221 Bulk editing reverse associations for any asset results in the disappearance N A of previous bulk edits of reverse associations 51 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v5 Table 1 40 Fixed issues for Inventory Solution 2985510 The Hardware Summary for the Resource Manager times out when you view TECH167817 a site server or Notification Server Note This fix is works correctly on a Notification Server setup with at least 32 GB RAM and Dual Processors 3080528 AexAuditPls exe writes verbose messages with no verbose setting in N A the policy or on the client 3118005 NS Nightly triggers the error Column IsLicensed does not belong to N A table Inv_Software_Product_License Table 1 41 Fixed issues for Software Management Framework 2882180 A point fix is required for the scheduling option Computer is available at N A the exact scheduled time 3120942 On the Known As page under Software Catalog and Software Library N A Settings you cannot select the Software resource type Error Failed to build KnownAs lookup grid 3161898 Agent fails to use GUID folders for package access in a custom location N A Table 1 42 Fixed issues for Deployment Solution 2943091 Ghconfig does not return the active partition N
12. DS plug in on a remote site server and you install the rollup the specific registry keys are deleted on the remote site server When you install the rollup on the Symantec Management Platform the Deployment Solution plug in policy is sent to the remote site server The policy erases the registry keys on the remote site server The missing registry keys cause your remote site server rollup installation to fail Before you install the rollup on the remote site server you must import the registry keys that are listed in the knowledge base article Missing default value or key in registry for DS Installation aborted IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 19 Installing or upgrading Deployment Solution To install or upgrade Deployment Solution 1 Copy the ITMS7 1 SP2 MP1 Rollup v11 Dec15_ 2014 zip to the Notification Server computer In the pop up window that opens choose to delete or keep the archive 3 Open the folder to which the files from the archive were extracted The PFlnstaller2 utility should be located in the folder to which files from the archive were extracted 4 Right click PFInstaller2 utility and then click Run as administrator Do not extract the rollup binaries to the Altiris folder By default all rollups are checked 5 To install the assemblies that are required for this rollup check DS uncheck all other options and click Install The information about the rollup version is pla
13. a Installing or upgrading the Symantec Management Platform SMP a Installing or upgrading the Symantec Management Agent on client computers a Installing or upgrading remote package server a Upgrading remote task servers a Installing or upgrading Inventory Solution a Installing or upgrading Asset Management Solution a Installing or upgrading the UNIX Linux Mac ULM Agent a Installing or upgrading Deployment Solution a Installing or upgrading Patch Management Solution a Installing or upgrading Monitor Solution IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 5 About the IT Management Suite 7 1 SP2 MP1 Rollup version 11 a Reverting the Symantec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided by the Rollup a Known issues in Rollup v11 a Fixed issues in Rollup v11 a Fixed Issues in Rollup v10 a Fixed Issues in Rollup v9 a Fixed issues in Rollup v8 a Fixed issues in Rollup v7 a Fixed issues in Rollup v6 a Fixed issues in Rollup v5 a Fixed issues in Rollup v4 a Fixed issues in Rollup v3 a Fixed issues in Rollup v2 a Fixed issues in Rollup v1 About the IT Management Suite 7 1 SP2 MP1 Rollup version 11 The IT Management Suite 7 1 SP2 MP1 Rollup version 11 contains point fixes that were not included in the IT Management Suite 7 1 SP2 MP1 release It also contains the fixes that were provided with rollup versions 1 2 3 4 5 6 7 8 9 and 10 Rollup v11 includes a lis
14. a longer time to finish In most cases it should take a few minutes 6 The Subnet txt and log txt file is created in SMP gt Other gt DeleteDuplicatedSubnets Installing or upgrading the Symantec Management Platform Warning If you use the Symantec Installation Manager to run a repair on the Symantec Management Platform or if you run aexconfig configureall reinstall the rollup in the end To install or upgrade the Symantec Management Platform 1 Copy the files in ITMS7_ 1 SP2 MP1 Rollup v11 Dec15_2014 zip file onto the hard drive of the Notification Server computer Caution Do not extract the rollup binaries to the Altiris folder Caution The PFinstaller2 utility should be located in the folder to which the files from the archive were extracted Open the folder to which the files from the archive were extracted Right click PFlInstaller2 utility and then click Run as administrator By default all rollups are checked 4 In the pop up window that opens choose to delete or keep the archive IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 11 Installing or upgrading the Symantec Management Agent on client computers 5 Toinstall the assemblies that are required for this rollup check SMP uncheck all other options and then click Install All the existing files are replaced with the newer ones The rollup installation may take few minutes to finish Warning This installation R
15. all discovered computer resources as parameters IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v3 Table 1 50 Fixed issues for Notification Server Core continued 2900145 Deleted computers on Parent Notification Server do not recreate the resource because the itemreplication record still exists and the hashes match N A 2961375 Site Maintenance Subnets page takes a long time to load if there are many encompassed subnets N A 3041496 Unable to upgrade Symantec Management Agent The following error is displayed Upgrade failed Error message Failed to run action UninstallSurrogatesForx686 N A 2554172 Importing filters for example during replication causes filter membership to be blanked which causes targets to become invalid when they are updated A critical failure may result if the filter is used as an exclusion N A 2693134 Two retries to install agent after SOI should be increased Agent installation failing in VM client N A 2773149 Changing package servers from constrained to unconstrained causes a package refresh on all packages with all package servers The webpage times out before refresh completes TECH202758 2773138 End of Replication Job fails to build Replication Results to save to Evt_NS_Hierarchy_Replication_Status Failure is due to an arithmetic overflow failure within spBuildHierarchyRep
16. folder in Windows Explorer for a11 files that you plan to install Opening this folder can cause the d11 files to disappear General installation and upgrade information You can install the Symantec Management Platform either with all the solutions or with individual solutions Each component has its own installation steps The steps to install or upgrade ITMS are identical a Symantec Management Platform installation or upgrade See Installing or upgrading the Symantec Management Platform SMP on page 8 a Remote package server installation or upgrade See Installing or upgrading remote package server on page 12 a Symantec Management Agent installation or upgrade See Installing or upgrading the Symantec Management Agent on client computers on page 11 a Remote task server installation or upgrade See Upgrading remote task servers on page 13 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 8 Installing or upgrading the Symantec Management Platform SMP a Inventory Solution installation or upgrade See Installing or upgrading Inventory Solution on page 14 a Asset Management Solution installation or upgrade See Installing or upgrading Asset Management Solution on page 16 a UNIX Linux Mac Agent installation or upgrade See Installing or upgrading the UNIX Linux Mac ULM Agent on page 17 a Deployment Solution installation or upgrade See Installing or upgrading Dep
17. in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 43 Fixed issues for Symantec Management Platform Notification Server 3065617 Filter update times out because the trgCollectionUpdateTargetinvalidate N A target causes errors in the console 3129548 CPU spikes to a sustained 100 and does not relent until ISRESET and N A Altiris service are cycled Improved performance when you updated large collections IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v4 Table 1 43 Server continued Fixed issues for Symantec Management Platform Notification 2868310 This message Update Configuration On Package Servers Accelerated TECH191662 Package Staging is displayed every 5 minutes in task history on the site servers 2999045 Blank packages are being sent to the package servers TECH204829 2926461 Replication items are not cleaned up after a Replication job times out or N A finishes Instead several Class types remain in the database accumulating and slowing down the system 2941050 Tasks that are replicated down to the children do not run if client computers N A were migrated from another Child Notification Server 2962951 AD Import Rules of security groups for both computers and users overwrite TECH200958 all existing filter memberships for the computers and the users that are found in those import rules 2950385 Members o
18. task that executes inan N A x86 preboot environment PXE or Automation folder 3071593 x86 and x64 folders are not present in NSCap temp folder after you install N A SMP MP1 1 on ITMS 7 1 SP2 to ITMS 7 1 SP2MP1 upgrade setup on server computer 2997600 Hierarchy package server issue All new images that are captured are stored N A in NS Server Deployment Task Handler Guid location 2974566 Copy file task fails if the file that is copied already exists on the destination N A system Table 1 58 Fixed issues for Unix Linux Mac 2917968 Managed delivery job fails when package download failure occurs TECH202763 2830116 InstallUnixClientTab control preloads all Organizational Groups in the TECH198267 Computer Selector control which causes save failures in large environments 2917973 Client Jobs that contain multiple inventory tasks fail to complete due to a N A timeout 3068848 Core dumps occurring after installing Cumulative Point Fix from 2704391 N A 2981103 See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 60 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 61 Fixed issues in Rollup v2 Fixed issues in Rollup v2 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v2 If ad
19. the files from the archive were extracted Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked 4 5 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 17 Installing or upgrading the UNIX Linux Mac ULM Agent In the pop up window that opens choose to delete or keep the archive To install the assemblies that are required for this rollup check Asset uncheck all other options and then click Install The information about the rollup version is placed into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES Installing or upgrading the UNIX Linux Mac ULM Agent Installation Prerequisite Symantec Management Agent 7 1 SP2 MP1 This rollup introduces a new ULM Agent version 7 1 8411 To install the Unix Linux Mac ULM Agent 1 Copy the files in 1tMS7_1_SP2 MP1 Rollup v11 _Dec15 2014 zip file onto the hard drive of the Notification Server computer Caution Do not extract the rollup binaries to the Altiris folder Caution The PFinstaller2 utility should be located in the folder to which the files from the archive were extracted Open the folder to which the files from the archive were extracted Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked In the pop up window that opens choose to delete or keep the archive To install the assemblies that are required for t
20. 1 50 on page 57 56 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 57 Fixed issues in Rollup v3 a Task Server See Table 1 51 on page 58 a Asset Management Solution See Table 1 52 on page 59 Data Connector See Table 1 53 on page 59 a Inventory Rule Management See Table 1 54 on page 59 a Inventory Solution See Table 1 55 on page 59 a Software Management Framework See Table 1 56 on page 60 a Deployment Solution See Table 1 57 on page 60 a Unix Linux Mac ULM See Table 1 58 on page 60 The fixes that were included in Rollup v2 and v1 are also included in this release See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 50 Fixed issues for Notification Server Core 2948643 SMA agent crashes during upgrade to 7 1 SP2 MP1 with fatal error in module N A AeXNSAgentHostSurrogate32 exe in AeXNSAgentHostSurrogate32 exe 3040684 Unquoted path for Symantec Management Agent service N A 2973760 Collection Membership cache change monitoring is not functioning TECH196163 due to inability to run as service account error occurs in logs after you apply the ITMS 7 1 SP2 v4 Rollup 2909684 Tasks that are scheduled to run every four weeks show incorrect schedules N A in the Symantec Management Console after the first run 2980090 Agent Push page InstallClient aspx loads slowly due to N A spGetComputerSelectorDetails running for
21. 11 Release Notes 9 Installing or upgrading the Symantec Management Platform SMP of this script is to clean up the unnecessary data that is created by the replication issue already fixed with this rollup If you have a Notification Server hierarchy set up you need to run a manual script to clean up the replication items before or after this rollup is applied to each of the Symantec Management Platform servers Symantec recommends that you pause the server processing before you run this script To turn off Server Processing 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane click Notification Server gt Notification Server Settings and then in the right pane on the Proccessing tab turn Server Proccessing off After the Server Proccessing is turned off you can run the DeleteOrphanReplicationItems script To run the DeleteOrphanReplicationItems script 1 Copy the files in ITMS7_ 1 SP2 MP1 Rollup _vll_Decl5 2014 zip file onto the hard drive of the Notification Server computer Expand SMP gt Other gt DeleteOrphanReplicationltems Right click PFInstaller2 click Run as administrator and then accept the UAC User Account Control prompt In the pop up window that opens click Install Files After these scripts complete restart Notification Server Activities The PurgeLOG txt log file is created at the root of the c drive and the log txt file is created in SMP gt Other
22. 2 and v1 are also included in this release See Fixed issues in Rollup v8 on page 37 See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 12 Fixed issues for Symantec Management Platform Notification Server 3355248 Slow full inventory NSE processing affects Basic Inventory processing N A 2990830 Agent Package Server vbs sample script does not work correctly in N A the current version 3149975 Compliance Summary Report returns no results N A 3317522 No connection pools are available after upgrading to MP1 1 N A IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed Issues in Rollup v9 Table 1 12 Fixed issues for Symantec Management Platform Notification Server continued 3423575 The source code of the New Replication Rule page shows an unencrypted N A password 3397822 Manage gt Jobs and Tasks page takes too long to load Large amount of TECH213493 Jobs and Tasks to be rendered 3268981 When the NS Package Refresh scheduled task runs Altiris service crashes N A if the manually created key value is set to VisiblePkgFiles True 3311605 Long delay before repl
23. 2014 Symantec Corporation All rights reserved Symantec the Symantec Logo the Checkmark Logo and Altiris and any Altiris or Symantec trademarks used in the product are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U S and other countries Other names may be trademarks of their respective owners This Symantec product may contain third party software for which Symantec is required to provide attribution to the third party Third Party Programs Some of the Third Party Programs are available under open source or free software licenses The License Agreement accompanying the Software does not alter any rights or obligations you may have under those open source or free software licenses Please see the Third Party Notice document for this Symantec product that may be available at http www symantec com about profile policies eulas the Third Party Legal Notice Appendix to this Documentation or TPIP ReadMe File accompanying this Symantec product for more information on the Third Party Programs The product described in this document is distributed under licenses restricting its use copying distribution and decompilation reverse engineering No part of this document may be reproduced in any form by any means without prior written authorization of Symantec Corporation and its licensors if any THE DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS REPRESENTATIONS AND WARRANTIE
24. 38 Failed to construct the dynamic virtual window error when you edit TECH181076 resource type with foreign key data class Table 1 33 Fixed issues for Inventory Solution 3243772 When you apply the 7 1 SP2 MP1 v5 Rollup the Server Inventory Plug in TECH208027 for Windows Package is not updated to the 7 1 7867 0 version as indicated in the v5 release notes 3204101 Hardware Inventory misses many data classes The agent appears to collect N A the data but it fails to merge the data into the NSI Failed to merge the results of lt approach2 gt lt approach2 gt with the final result 3151567 Executable Usage Metering Report Drill Down fails to load and times out TECH202747 2965299 File Baseline Task fails cloning or adding a new File Baseline Task times N A out 2858659 Clean up references on the queries that still use WrkSta table N A 3142992 The Executable Usage gt Drill down to Executable Usage report does not N A display values for its Application and User columns 2714599 Software Summary view in Resource Manager times out in Inventory Solution N A 7 1 SP2 2767509 Reboot Time Server Inventory and Last bootup time Inventory show TECH187630 a difference when they should match Table 1 34 Fixed issues for Software Management Framework 3136700 Delta Inventory for SMF Software Discovery sends all dat and does not N A remove the software that has been uninstalled 3142782
25. 9 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61
26. 9 but it is 2160 minutes on DS 7 1 N A 2969689 Client Task Requests that are orphaned due to missing versions or due N A to tasks that have been deleted are not cleaned up or prevented which causes them to re run when the site server is restarted 2973905 Update filter membership task does not allow for parameters N A 62 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 63 Fixed issues in Rollup v1 Table 1 60 Fixed issues for Task Server continued 2973944 Tasks fail to use specified credentials on Win2k8 client computers N A Table 1 61 Fixed issues for Data Connector 2972780 You cannot import Blank using data connector N A Table 1 62 Fixed issues for Inventory Solution 2869702 Application metering reports never complete N A 2948922 Multiple products have identical associated key files which cause metering N A information to display incorrectly Table 1 63 Fixed issues for Software Management Solution 2806233 Installed Software and With Unassigned Type folders and views fail to N A open 2964439 When WOL is enabled for MDP WOL Compliance task is performed for all TECH199794 discovered resources not only for apply to resources 2861675 The Software Compliance by Managed Delivery Policy report lists all TECH173786 historically targeted systems instead of those that the policy currently targets See Fixed issues in Rollup v7 on page 41 Se
27. ClientTask TryUpdateSiteAssignmentsForUnmanagedDevices 2965187 After upgrade to 7 1 SP2 MP1 actions result in error Failed to load resource TECH198556 associations The user does not have permission to perform this action Table 1 65 Fixed issues for Task Server 2706048 CleanupTaskDataTask can cause data loss because of logic errors in N A tmCleanupSummaryOrphans and tmCleanupTaskOrphans 2952903 A Restart Power Control task does not complete because a Task Server N A is changed after a client computer is restarted 2952912 A WOL Power Control task does not complete because the task instance N A cache is cleared before the task timeout IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 65 Fixed issues in Rollup v1 Table 1 66 Fixed issues for Data Connector 2952906 When you open a Data Connector Import Rule it times out or takes a long N A time to open if the data source has a SQL query that takes 3 minutes or longer to process Table 1 67 Fixed issues for Inventory Solution 2957711 BIOS Inventory Versiondoes not always display correct information N A 2957705 The App Metering agent crashes SMA 7 1 15350 8350 N A 2957683 Targeted Software Inventory policy fails if a user is not logged on tothe N A target computers See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 4
28. Discovery and Inventory gt Windows UNIX Linux Mac and then click Inventory Pack for Servers Plug in Install or Inventory Pack for Servers Plug in Upgrade 3 Roll out the policy to Windows based client computers When the client computer receives the policy the Server Inventory Agent is upgraded Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgrade policies or create new ones and use the desired filter or target To activate the policy you must first upgrade the Symantec Management Agent on the client computers otherwise the client computers are not targeted properly Installing or upgrading Asset Management Solution Installation Prerequisite Asset Management Solution 7 1 SP2 MP1 This rollup does not contain a new version of Asset Management Solution If Asset Management Solution was upgraded to version 7 1 7858 during Rollup v7 installation you do not need to upgrade Asset Management Solution after Rollup v11 installation To install or upgrade Asset Management Solution 1 Copythe ITMS7 1 SP2 MP1 Rollup v11 Dec15_ 2014 zip onto the hard drive of the Notification Server computer Caution Do not extract the rollup binaries to the Altiris folder Caution The PFinstaller2 utility should be located in the folder to which the files from the archive were extracted Open the folder to which
29. Rollup v8 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v8 If additional information about an issue is available you can access it by clicking the Article ID link 37 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 38 Fixed issues in Rollup v8 Note that N A Not Available The fixes that were included in Rollup v7 v6 v5 v4 v3 v2 and v1 are also included in this release See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 17 Fixed issues for Symantec Management Platform Notification Server 3327364 Unable to save changes on the Resource History page N A 3271069 When editing a filter that was opened using the main search bar in the upper N A right side of the Symantec Management Console the top windowManager is null or not an object error message appears 3213069 When you create a custom filter with a raw SQL query that contains at least N A one item and then try to delete that filter the action cannot be completed 3198428 Target can be deleted from a policy only after the second attempt N A 3215186 Local lock and mutex is no
30. S INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NON INFRINGEMENT ARE DISCLAIMED EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID SYMANTEC CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING PERFORMANCE OR USE OF THIS DOCUMENTATION THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12 212 and subject to restricted rights as defined in FAR Section 52 227 19 Commercial Computer Software Restricted Rights and DFARS 227 7202 et seq Commercial Computer Software and Commercial Computer Software Documentation as applicable and any successor regulations whether delivered by Symantec as on premises or hosted services Any use modification reproduction release performance display or disclosure of the Licensed Software and Documentation by the U S Government shall be solely in accordance with the terms of this Agreement Symantec Corporation 350 Ellis Street Mountain View CA 94043 http www symantec com IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes This document includes the following topics a About the IT Management Suite 7 1 SP2 MP1 Rollup version 11 a Prerequisites a Before you install this rollup a General installation and upgrade information
31. Software Discovery through Inventory Solution on Delta sends in all data N A which causes significant performance issues on Notification Server 47 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v6 Table 1 34 Fixed issues for Software Management Framework continued 2972712 Maintenance that is required for Managed Policy Item Versions and Item TECH196258 Version Data in large environments see massive growth which affects NS performance 3182705 After software uninstall from any client computer and execution of delta N A software discovery the client computer is absent in the list of Computers with software installed of all discovered software 2747178 Application metering reports do not work because Inv_Windows_File data HOWTO80675 is not replicated 3135945 Software detailed export fails to import Company Vendor data from software N A import XML file 3129502 On a Managed SWD policy the Allow user to defer up to a total of TECH204185 option does not work if the Symantec Management Agent s Warning Countdown duration timer is not set to the default setting five minutes Table 1 35 Fixed issues for Deployment Solution 2983938 systemdrive DeployAnywhere is unable to retarget an Intel video card N A on a Compaq 8100 Elite SFF 3144233 Application fault on SBSnsinterface exe faulting on rpcd11 d11 file N A 2951796 Unable to ha
32. Warning This installation restarts Altiris services and Web services The information about the rollup version is placed into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES Rollup v11 introduces a new version of Inventory Plug in 7 1 7900 0 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Installing or upgrading Inventory Solution To install or upgrade the Inventory Plug in that is provided in this rollup version 7 1 7900 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Agents Plug ins gt Discovery and Inventory gt Windows UNIX Linux Mac and then click Inventory Plug in Install or Inventory Plug in Upgrade 3 Roll out the policy to Windows based client computers When the client computer receives the policy the Inventory Agent is upgraded Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgrade policies or create new ones and use the desired filter or target To activate the policy you must first upgrade the Symantec Management Agent on the client computers otherwise the client computers are not targeted properly Rollup v11 introduces a new version of the Application Metering plug in 7 1 7900 0 To install or upgrade the Application Metering plug in that is provided in this rollup version 7 1 7900
33. a Asset Management Solution See Table 1 25 on page 43 a Inventory Solution See Table 1 26 on page 43 a Software Management Framework 41 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 42 Fixed issues in Rollup v7 See Table 1 27 on page 44 a Deployment Solution See Table 1 28 on page 44 The fixes that were included in Rollup v6 v5 v4 v3 v2 and v1 are also included in this release See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 23 Fixed issues for Symantec Management Platform Notification Server 3266024 Symantec Management Platform agent package credentials vulnerability HOWTO85078 For more information see the knowledge base article Symantec Management Platform 7 0 and 7 1 Agent Vulnerability 3227049 InvalidCastException in ExpandResourceDataRules when you retrya N A replication job 3193848 After you run a report that returns more than one result for a computer record N A you cannot open Resource Manager 3144375 After a user requests software from the Software Portal and Notification N A Server sees the request and a scheduled task is created the task is not sent to the user s agent 3062385 The Purge maintenance page t
34. anagement Platform Notification 3105578 Completed hierarchy replication jobs set the coresettings config TECH204003 EnableNSEventLog setting to false 3090297 If a subnet is created and then unassigned twice it never appears in the TECH202979 console 3061239 Unable to modify monthly shared schedules TECH202299 3064118 The creation of virtual data classes causes the cloning of security roles to N A fail 3006918 Symantec Management Agent upgrade fails to create agent service when TECH205999 previous agent service is marked for deletion Table 1 38 Fixed issues for Task Server 3026443 If the Time Synch service fires and changes the local clock tasks still waiting N A instantly time out 3145665 Client task server starts twice N A 2991372 When you run a task Call Web Service on a server where the web service N A process runs longer than 2 minutes the task always times out after about 2 min 40 sec 3060884 Multiple TaskService Resources can be associated with one Task Server N A which causes errors during client registration Table 1 39 Fixed issues for Asset Management Solution 3008422 CMDB Assign to location function does not change location for assets N A after Point fix 2886254 installation 3021924 An asset s Asset Status field value resets to Active when other fields are N A filled in which cause the window to refresh such as Manufacturer or Cost
35. ator By default DS and Remote Task Server are checked Click Uninstall This uninstall reverts the Remote site server computer to its 7 1 SP2 MP1 state Warning This uninstallation restarts Altiris Services Web services and PXE Services To uninstall the updated Deployment Solution Agents provided with this rollup for a 32 bit client computer 1 In the Symantec Management Console on the Settings menu click All Settings In the left pane expand Agents Plug ins gt Deployment and Migration gt Windows x86 and then click Deployment Plug in for Windows x86 Uninstall Enable the policy Schedule the Install policy to install the default Agent versions on the client computers IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 27 Reverting the Symantec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided by the Rollup To uninstall the updated Deployment Solution Agents provided with this rollup for a 64 bit client computer 1 In the Symantec Management Console on the Settings menu click All Settings In the left pane expand Agents Plug ins gt Deployment and Migration gt Windows x64 and then click Deployment Plug in for Windows x64 Uninstall Enable the policy Schedule the Install policy to install the default Agent versions on the client computers To uninstall the updated Deployment Automation Folder provided with this rol
36. ced into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES Note While Installing Deployment Solution Rollup v11 PE nstall_x86 PEInstall_x64 gets automatically deleted from the Notification Server computer from the following locations WNSmachine NSCap bin Win32 x86 Deployment Automation PEInstall_x86 NSmachine NSCap bin Win64 x64 Deployment Automation PEInstall_x64 As a result you do not need to manually delete these files before creating v11 Deployment Automation Folder To install or upgrade Deployment Solution on Remote site server 1 Copythe ITms7 1 SP2 MP1 Rollup vll_Dec15 2014 zip to the remote site server 2 Onthe remote site server right click PFInstaller2 utility and then click Run as administrator to unzip the SP2_MP1_v11 Folder By default DS and Remote Task Server are checked 3 Toinstall the assemblies that are required for this rollup click Install Warning This installation restarts Altiris services Web services and PXE services on both Notification Server and the remote site server IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 20 Installing or upgrading Deployment Solution The information about the rollup version is placed into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES Installing or upgrading the Deployment Plug in To install or upgrade the Deployment Plug in for 32 bit client computers 1 Inthe Symantec Management Co
37. ck logon do not run when the schedule is set to run At User Log on N A 3530269 Changing IPv4 settings on a client computer is detected in the SMA logs but the OnLocallPaddressChanged event is not triggered and the basic inventory is not sent TECH217609 3442471 If the pkgdlv1k tmp file in the Package Delivery directory is locked the packages are downloaded to C Windows System32 directory until the drive runs out of space N A 33 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed Issues in Rollup v10 Table 1 8 Server continued Fixed issues for Symantec Management Platform Notification 3459012 Basic inventory stops the cycle if a single warning occurs instead of continuing N A the cycle and scanning the rest of the client computers 3468898 In some cases the System Tray icon for Symantec Management Agent N A disappears on Windows Server 2003 x32 client computers that are controller by multiple task server connections 3467765 The session timeout period for the Selected Resources filter dialog box is N A too short Table 1 9 Fixed issues for Task Server 3461623 Multiple policies run the tasks that cause 10 of the client computers in an N A environment to use up to 100 of CPU 3428761 In a job that contains multiple tasks the Agent stops running the tasks after N A a reboot task is successfully executed 3428760 Power control reboo
38. de policies or create new ones and use the desired filter or target To activate the policy you must first upgrade the Symantec Management Agent on the client computers otherwise the client computers are not targeted properly Installing or upgrading Monitor Solution Installation Prerequisite Monitor Solution 7 1 SP2 MP1 This rollup does not contain a new version of Altiris Monitor Agent RMS If Altiris Monitor Agent RMS was upgraded to version 7 1 7875 during Rollup v8 installation you do not need to upgrade Altiris Monitor Agent RMS after Rollup v11 installation IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 23 Reverting the Symantec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided by the Rollup To install or upgrade Monitor Solution 1 Copy the files in 1tms7_1 SP2 MP1 Rollup v11 Dec15 2014 zip onto the hard drive of the Notification Server computer Caution Do not extract the rollup binaries to the Altiris folder Caution The PFinstaller2 utility utility should be located in the folder to which the files from the archive were extracted 2 Open the folder to which the files from the archive were extracted Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked 4 In the pop up window that opens choose to delete or keep the archive To install the assemblies that are required for this rollu
39. ditional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixed issues are separated into the following IT Management Suite products and components Symantec Management Platform Notification Server See Table 1 59 on page 61 a Task Server See Table 1 60 on page 62 a Data Connector See Table 1 61 on page 63 a Inventory Solution See Table 1 62 on page 63 Software Management Solution See Table 1 63 on page 63 The fixes that were included in Rollup v1 are also included in this release See Fixed issues in Rollup v1 on page 63 Table 1 59 Fixed issues for Symantec Management Platform Notification Server 2967891 After you change the custom schedules for Collect Inventory Policies N A client computers execute the Policies twice 2925178 Relocate Up does not reset Resource GUID when parent already has that N A resource 2972747 NSEs are sent with different GUIDs from the same client TECH198274 2974142 NS Console Search takes so long that the page times out The stored TECH157206 procedure contains poor SQL logic 2972856 You can only add 15 or less Software Purchases to a Software License at N A a time or the console throws a webpage error IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v2 Table 1 59 Fixed issues for Symantec Management Platform Notification
40. e Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 Fixed issues in Rollup v1 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v1 If additional information about an issue is available you can access it by clicking the Article ID link IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 64 Fixed issues in Rollup v1 Note that N A Not Available The fixed issues are separated into the following IT Management Suite products and components a Symantec Management Platform Notification Server See Table 1 60 on page 62 a Task Server See Table 1 65 on page 64 a Data Connector See Table 1 66 on page 65 a Inventory Solution See Table 1 67 on page 65 Table 1 64 Fixed issues for Symantec Management Platform Notification Server 2855279 CPU spikes to a sustained 100 and does not relent until ISRESET and N A Altiris service are cycled 2756591 spGetResourceltemWithManadatoryResourceAssociation runs slowly N A due to join on vResourceltem 2799261 Specific NSE files from client computers are not processed These files TECH195347 become stale and are never processed 2952909 Computers and Users that are imported from Active Directory cause Errors N A in logs from Altiris TlaskManagement ClientTask Base
41. e N A 2931056 Users with permissions to limited tasks can see all tasks and select any task N A when they create a managed software delivery policy 3088086 Managed Delivery Policy fails to run on VMware client if network adapter N A is disconnected Table 1 49 Fixed issues for Deployment Solution Deployment Agent fails to retarget Intel Centrino Advanced N 6205 Wi Fi N A and Intel Centrino Ultimate N 6300 Wi Fi Laptop computers known to PXE become unknown to PXE when booted N A through a docking station Client sbs file is not populated with full results of soGetPXEClientinfo N A Sending a reboot to automation task to the LinuxPE environment causes N A system to continually restart to LinuxPE environment We query only the AC_TCPIP table for MAC addresses for PXE The N A AC_TCPIPv6 table may contain different MAC addresses See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 Fixed issues in Rollup v3 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v3 If additional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixed issues are separated into the following IT Management Suite products and components a Notification Server Core See Table
42. e Table 1 29 on page 45 a Task Server See Table 1 30 on page 46 a Connector Solution See Table 1 31 on page 46 a Asset Management Solution See Table 1 32 on page 47 a Inventory Solution See Table 1 33 on page 47 a Software Management Framework See Table 1 34 on page 47 a Deployment Solution See Table 1 35 on page 48 a Patch Management Solution See Table 1 36 on page 48 The fixes that were included in Rollup v5 v4 v3 v2 and v1 are also included in this release See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 29 Fixed issues for Symantec Management Platform Notification Server 3190550 FlushAgentEvents registry key stops NSEs from processing N A 3233000 Unable to import users and computers from Active Directory Distribution Groups after you apply the 7 1 SP2 MP1 Rollup v5 N A IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v6 Table 1 29 Server continued Fixed issues for Symantec Management Platform Notification 3249702 The data container creation process regressed At one time the process N A used fnLongListToTable in the mp1 v2 version but went back to using fnListToGuidTableDal2 The regression added 12
43. ec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided by the Rollup To uninstall Patch Management Solution provided with this rollup 1 2 Open the folder to which rollup files were extracted Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked Check Patch uncheck all other options and click Uninstall This uninstall reverts Patch Management Solution to its 7 1 SP1 MP1 state on the Notification Server computer Warning This uninstallation restarts Altiris Services and Web services To uninstall the updated Patch Management Solution Agents provided with this rollup 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Agents Plug ins gt Software gt Patch Management gt Windows and then click the Uninstall policy Enable the policy 4 Schedule the Install policy to install the default Agent versions on the client computers To uninstall Asset Management Solution provided with this Rollup 1 2 Open the folder to which the rollup files were extracted Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked Check Asset uncheck all other options and click Uninstall Assemblies are restored from the Backup folder It restores Asset Solution to the 7 1 SP2 MP1 state Warning This uninstallation restarts Altiri
44. ently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v5 If additional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixed issues are separated into the following IT Management Suite products and components a Symantec Management Platform Notification Server See Table 1 37 on page 50 a Task Server See Table 1 38 on page 51 a Asset Management Solution See Table 1 39 on page 51 a Inventory Solution See Table 1 40 on page 52 a Software Management Framework See Table 1 41 on page 52 a Deployment Solution See Table 1 42 on page 52 The fixes that were included in Rollup v4 v3 v2 and v1 are also included in this release 49 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 50 Fixed issues in Rollup v5 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 37 Fixed issues for Symantec Management Platform Notification Server 3035708 The Symantec Management Agent Install Page Rollout Agent to N A computers grid shows computers with P Address even if they are not in the AgentPushData table 3091060 Filters that include all resources in their definition for example users files TECH206293 etc cause AexSvc and w3wp to consume more memor
45. estarts Altiris services and Web services The rollup version information is placed into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES 6 After you finish the Symantec Management Platform upgrade run the NS Package Refresh scheduled task to update the new Symantec Management Agent and package server plug in packages before enabling the upgrade policies See Installing or upgrading remote package server on page 12 7 Clear the Internet browser cache Installing or upgrading the Symantec Management Agent on client computers Installation Prerequisite Symantec Management Platform 7 1 SP2 MP1 1 7 1 8400 Rollup v11 introduces a new version of the Symantec Management Agent 7 1 15495 8495 To install or upgrade the Symantec Management Agent on client computers 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 For Non Site Server do the following a Inthe left pane expand Agent Plug ins gt Symantec Management Agent gt Windows gt Non Site Server and then click Symantec Management Agent for Windows x64 Upgrade or Symantec Management Agent for Windows x86 Upgrade For Site Server do the following a Inthe left pane expand Agent Plug ins gt Symantec Management Agent gt Windows gt Site Server and then click Symantec Management Agent IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 12 Installing or upgrading remote package server
46. f security roles other than Symantec Administrators cannot see N A the custom targets created by the Symantec Administrators and vice versa 3064125 Package server agent unable to set file permissions when path depth exceeds TECH202089 256 characters 2971465 SMA occasionally fails to finish creating a Program Execution event and TECH203439 sending it to Notification Server 3061165 AD User Import Rules do not seem to behave as they used to before MP1 N A Table 1 44 Fixed issues for Task Server 3056878 Replicated task schedule does not execute on the Child Notification Server N A 2836541 Server Job conditions do not work with child client job results N A 2961802 Client computers stop running tasks due to excess local task instances in N A the cache 2996388 Servers and site servers running scripts cannot use system tokens like N A COMPUTERNAME 54 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v4 Table 1 45 Fixed issues for Asset Management Solution 2976813 Resource Merge allows resources with the No Delete attribute to be merged N A into other resources 2879828 Parameter Value Providers for some Asset CMDB reports are lost aftera N A cloned instance of the report is saved Table 1 46 Fixed issues for Data Connector 3129549 Out of memory exception occurs when you run a connector rule N A 3051496 Evt_Resources_Imp
47. for Windows x64 Upgrade or Symantec Management Agent for Windows x86 Upgrade 3 Roll out the policy to Windows based client computers When the client computer receives the policy the Symantec Management Agent is upgraded Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgrade policies or create new ones and use the desired filter or target To activate the policy you must first upgrade the Symantec Management Agent on the client computers otherwise the client computers are not targeted properly Installing or upgrading remote package server Installation Prerequisite Symantec Management Platform 7 1 SP2 MP1 1 7 1 8400 Rollup v11 does not contain any new fixes for the remote package server If you updated a remote package server to version 7 1 15445 with Rollup v6 installation you do not need to upgrade package server after Rollup v11 installation Symantec recommends that you upgrade the site servers and package servers before you upgrade the client computers Before you upgrade the package server agent you should first upgrade the Symantec Management Agent on those computers See Installing or upgrading the Symantec Management Agent on client computers on page 11 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 13 Upgrading remote task servers To upgrade the Symantec Management
48. he folder to which the files from the archive were extracted 2 Open the folder to which the files from the archive were extracted IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 22 Installing or upgrading Monitor Solution 3 Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked In the pop up window that opens choose to delete or keep the archive To install the assemblies that are required for this rollup check Patch uncheck all other options and then click Install All the existing files are replaced with the newer ones The rollup installation may take a few minutes to finish Warning This installation restarts Altiris services and Web services The information about the rollup version is placed into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES To install or upgrade the Patch Management plug in that is provided in this rollup version 7 1 7875 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Agents Plug ins gt Software gt Patch Management gt Windows 3 Roll out the policy to Windows based client computers When the client computer receives the policy the Patch Management Agent is upgraded Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgra
49. his rollup check ULM uncheck all other options and then click Install The information about the rollup version is placed into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 18 Installing or upgrading Deployment Solution To upgrade the Unix Linux Mac ULM Agent 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Agents Plug ins gt Symantec Management Agent gt UNIX Linux Mac and then click Symantec Management Agent for UNIX Linux Mac Upgrade 3 Roll out the policy to the client computers When the client computer receives the policy the UNIX Linux Mac Agent is upgraded Note If the Upgrade policy is set to Run Once ASAP the policy does not run again on the client computers after it has run once already You can either clone the Upgrade policies or create new ones and use the desired filter or target To activate the policy you must first upgrade the Symantec Management Agent on the client computers otherwise the client computers are not targeted properly Installing or upgrading Deployment Solution Installation Prerequisite Deployment Solution 7 1 SP2 MP1 Rollup v11 includes Deployment Agent version 7 1 7862 Rollup v11 includes DeployAnywhere version 12 0 0 6277 Rollup v11 includes Driver Manager version 12 0 0 6277 Note If you installed the Deployment Solution
50. hours to a full replication 3190700 Eliminates unnecessary blocking tablockx on ResourceAssociation table TECH206232 in sopResourceAssociationsDeleteData 2998869 Application identity in replication results in 401 unauthorized TECH179382 TECH206247 3195726 Inventory policies are not running on some client computers after client N A computers restart 3190254 Computers are not imported from Active Directory with a in the OU name N A in OV 3149109 Client computers cannot download a software package that contains an N A asp file 3194839 Creating a Quick Delivery task creates a dependency item that always fails TECH204643 replication 3011373 Table 1 30 Fixed issues for Task Server Tasks are running twice N A 2964185 Condition Evaluation does not work correctly N A Table 1 31 Fixed issues for Connector Solution 3149976 When you are running the Altiris Profiler Data Connector Import Rule works However if Profiler is closed the Import Rule hangs the server requiring IIS to be reset N A 46 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v6 Table 1 32 Fixed issues for Asset Management Solution 3128954 Error as Virtual Window Handler unexpected error occurred is N A displayed when you click Receiving To Stockroom link on Receive Items page for Invoice after you install the solution rollup v4 31650
51. ication job starts on some setups Approximate delay N A is 1 hour 3412198 Basic Inventory Dates for Mac computers are not replicated back to the N A parent Notification Server 3304240 An error message appears about a missing Patch Stored Procedure when N A you delete a client resource from the console 2946058 Session timeout in the Selected Resources filter window N A Table 1 13 Fixed issues for Task Server 3370872 Child jobs are not launched in sequential order and are running twice instead N A 3423661 Tickles are not reaching the client computers N A 3398209 Same task is repeatedly successfully executed yet the Notification Server N A does not recognize the result and the task keeps executing 3079795 A large number of agentless inventory tasks causes the Agentless Inventory N A portal page to load very slowly or fail to load the data 3408753 Production automation Jobs are not executed on 30 out of 100 client N A computers due to a ATRShost limit problem 3356321 Task instances keep getting instances assigned to a resource with the guid N A 00000000 0000 0000 0000 000000000000 3378266 Compare option of the File Baseline task fails on Windows 8 64bit client N A computers because the default 30 min timeout interval is insuffiecient to complete the task 36 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v8 Table 1 14 Fixed issue
52. icient It affects the performance N A and the size needs to be increased 3210606 If a Symantec Management Platform account is deleted from the console N A any items that the account owns will have no ownerguid in securityentity table 3215537 Removing last resource from static filter created from a report causes a page N A error 3311717 Symantec Management Agent should not send all locally queued NSE files N A if the first one is unable to be sent 2689050 Unable to push Symantec Management Agent installation using FQDN N A 3381245 Packages fail to refresh because the package server gets invalid Agent N A credentials from Notification Server 3157982 The schedules are not marked as completed after execution N A 3187060 Incorrect number of client computers is displayed in the Task Server N A Summary report 2784124 Unable to save changes in the Conditional dialog box when editing a report N A 3328083 Agents outside internal networks not sending inventory NSE s correctly N A 3232677 When the last value from the Telephones fields in Active Directory is N A removed Active Directory import does not update the fields as blank and the old values are still displayed 3397938 Report parameter editing creation dialog box times out or takes a long time N A 39 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v8 Table 1 18 Fixed issues fo
53. imes out on loading in environments with N A large databases 3226170 Agents request config and send basic inventory every 6 8 seconds N A 3091202 Many NS Agents performing GetPackagelnfo requests can prevent N A package servers from being able to perform GetPackagelnfo requests 3253599 Customer identified Cross Site Scripting vulnerability in N A Altiris Console Default aspx 3242216 Resource History page is slow to load N A IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v7 Table 1 23 Server continued Fixed issues for Symantec Management Platform Notification 3127630 Report parameter editing creation dialog times out or takes a long time N A 3302175 Default filter Windows 2000 XP Vista 7 8 Workstations includes a N A SubcollectionGuid that does not exist as an item 3256195 Some files that were removed from the client are not removed from the TECH182567 database by Inventory s file scan Table 1 24 Fixed issues for Task Server 3256315 Manually assigned agents to task server took more time for assigning N A 3160531 Client Task Agent may enter the loop when it fails to post task status to TS N A Server StatusEVT error is displayed 3237520 client computers do not get any task server back from the Symantec N A Management Platform 3256652 Job Task Status Detail report does not return any results once a job or task N A i
54. le the Install policy to install the Symantec Management Agent SMA on client computers The original version of the SMA is installed on the client computers To uninstall the UNIX Linux Mac Agent provided with this rollup 1 In the Symantec Management Console on the Settings menu click All Settings In the left pane expand Agents Plug ins gt Symantec Management Agent gt UNIX Linux Mac and then click Symantec Management Agent for UNIX Linux Mac Uninstall IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 26 Reverting the Symantec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided 3 4 by the Rollup Enable the policy Schedule the Install policy to install the default Agent versions on the client computers To uninstall Deployment Solution DS provided with this rollup 1 2 Oo ON OD Uw Open the folder to which rollup files were extracted Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked Check DS uncheck all other options and then click Uninstall This uninstall reverts Deployment Solution to the 7 1 SP2 MP1 state on the Notification Server computer Warning This uninstallation restarts Altiris Services Web services and PXE Services On the remote site server go to the folder where the DS rollup files are located Right click PFInstaller2 utility and then click Run as administr
55. licationStatus to handle the sum of Encoding sizes N A 3049977 After you change the custom schedules for Collect Inventory Policies client computers execute the policies twice Once on schedule and then again the next morning when no policy is scheduled TECH202759 2966660 Failed to refresh the Resource Update Summary table Invalid column name id error appears in log TECH202761 Table 1 51 Fixed issues for Task Server 2977700 Unknown exception when you call ASDK collectionmanagement N A webservice 2954853 Run Task Error when Run Task is run from Resource Manager N A 2703606 OriginNSSourceNSld and SourceNSWeb are not updated after Notification N A Server NS for a client is changed to Parent NS from Child NS 2972490 The agent removes or changes special characters in vb scripts N A 58 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v3 Table 1 52 Fixed issues for Asset Management Solution 2972609 You get a server error when you receive over 250 line items at a time ona N A single invoice 2959566 fnAssetHierarchyTree is removed after you upgrade from 7 1 SP1 to 7 1 N A SP2 MP1 directly 3041690 The report All Resources Picker Report used by advanced resource pickers N A within Asset is slow because of string localization Table 1 53 Fixed issues for Data Connector 2939594 dataupda
56. log box that opens select the existing PEInstall Preboot Configurations 3 Click Recreate Preboot Environment but do not click Save Changes This action launches Bootwiz exe which you can see in the Task Manager on the Notification Server computer It recreates PEInstall_x86 exe and PEInstall_x64 exe in the respective folders on the Notification Server computer The new DLL is used for this new preboot Note After the automation folders are updated on the Notification Server computer and on all the package servers you can uninstall your current automation folders You can then reinstall new automation folders by using the Deployment Automation Folder for Windows x86 Install or Deployment Automation Folder for Windows x64 Install policies Installing or upgrading Patch Management Solution Installation Prerequisite Patch Management Solution 7 1 SP2 MP1 This rollup does not contain a new version of Patch Management Solution If Patch Management Solution plug in was upgraded to version 7 1 7875 during Rollup v7 installation then you do not need to upgrade Patch Management Solution after Rollup v11 installation To install or upgrade Patch Management Solution 1 Copy the files in 1tms7_1 SP2 MP1 Rollup v11 Dec15 2014 zip onto the hard drive of the Notification Server computer Caution Do not extract the rollup binaries to the Altiris folder Caution The PFinstaller2 utility utility should be located in t
57. loyment Solution on page 18 a Patch Management Solution installation or upgrade See Installing or upgrading Patch Management Solution on page 21 a Monitor Solution installation or upgrade See Installing or upgrading Monitor Solution on page 22 Installing or upgrading the Symantec Management Platform SMP Installation Prerequisite Symantec Management Platform 7 1 SP2 MP1 1 7 1 8400 Installing or upgrading in a hierarchy You must apply the 7 1 SP2 MP1 v11 Rollup to each Symantec Management Platform Server Notification Server in a hierarchy In a hierarchy Symantec recommends that you upgrade the child Notification Servers first and then upgrade the parent Notification Server For information about upgrading Notification Servers in a hierarchy see the knowledge base article Upgrading Notification Servers in a hierarchy at the following URL http www symantec com docs HOWTO21657 Cleanup scripts The following cleanup scripts are optional m DeleteOrphanReplicationItems m DeleteDuplicatedSubnets If you decide to run the scripts Symantec recommends that you run them after you install the rollup Cleanup scripts are located in the SMP Other folder Runni ng the DeleteOrphanReplicationItems scri pt If you have implemented a Notification Server hierarchy in your environment a DeleteOrphanReplicationItems script is available with this rollup The purpose IT Management Suite 7 1 SP2 MP1 Rollup Version
58. lup 1 On the Notification Server computer go to C ProgramFile Altiris Notification Server NSCap bin Win86 X86 Deployment Automation PEInstall_x86 In the PEInstall_x86 folder delete the PEInstall_x86 exe file Go to c ProgramFile Altiris Notification Server NSCap bin Win64 X64 Deployment Automation PEInstall x64 In the PEInstall_x64 folder delete the pEInstall_x64 exe file In the Symantec Management Console on the Settings menu click Deployment gt Create Preboot Configurations In the dialog box that opens elect the existing PEInstall Preboot Configurations Click Recreate Preboot Environment but do not click Save Changes This action launches Bootwiz exe You can see it launch in the Task Manager on the Notification Server computer This action also recreates PEInstall_x86 exe and PEInstall_x64 exe in the respective folders on the Notification Server computer After you update the automation folders on Notification Server and all package servers use the Deployment Automation Folder for Windows x86 x64 Uninstall policy to uninstall your automation folders and reinstall the default automation folder In the Symantec Management Console on the Settings menu click All Settings In the left pane expand Agents Plug ins gt Deployment and Migration gt Windows x86 Windows x64 and then click the relevant policy IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 28 Reverting the Symant
59. ndlenoncriticaldrivers in the selected mode because of vista N A sysprep merge issues reverting to user mode 3058386 Interface service may not correctly handle information to Server service after N A it reads SBS files Table 1 36 Fixed issues for Patch Management Solution 3131099 Import of Novell channels list fails due to authorization error TECH204201 3162232 Deadlocks occur that involve spResourceAssociationsDeleteData and N A spPMCore_RemoveBadResourceAssociations 3105154 License registration for client computers does not work when the assessment TECH203418 policy is cached on Notification Server 48 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v5 Table 1 36 Fixed issues for Patch Management Solution continued 3177121 No rows returned by spPMWin_GetConfigInfoForSoftwareUpdate for N A Software Update errors appear in Notification Server log during policy refresh on client after upgrade from 7 1SP1 to 7 1SP2 to 7 1SP2MR1 2847090 Multiple client computers crash Access Violations N A 3105219 Revise task on Child does not recreate modified Updates for Advertisements N A that were received from Parent 3208999 AexPatchUtil exe Xa qnever stops if one of the software updates N A was installed manually See Fixed issues in Rollup v7 on page 41 Fixed issues in Rollup v5 The following list contains the curr
60. nsole on the Settings menu click All Settings 2 Inthe right pane expand Agents Plug ins gt Deployment and Migration gt Windows x86 and then click Deployment Plug in for Windows x86 Install or Deployment Plug in for Windows x86 Upgrade 3 Roll out the policy to the Windows based client computers When the client computer receives the policy the Deployment Agent is upgraded Note The Deployment Agent version is 7 1 7862 To install or upgrade the Deployment Plug in for 64 bit client computers 1 Inthe Symantec Management Console on the Settings menu click All Settings 2 Inthe left pane expand Agents Plug ins gt Deployment and Migration gt Windows x86 and then click Deployment Plug in for Windows x64 Install or Deployment Plug in for Windows x64 Upgrade 3 Roll out the policy to the Windows based client computers When the client computer receives the policy the Deployment Agent is upgraded Note The Deployment Agent version is 7 1 7862 Installing or upgrading the Deployment Automation Folder Follow the Deployment Automation folder installation steps for all upgrade scenarios IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 21 Installing or upgrading Patch Management Solution To install or upgrade the Deployment Automation Folder 1 Open the Symantec Management Console on the Settings menu click Deployment gt Create Preboot Configurations 2 Inthe dia
61. ort_Results Event table is not populated ASPX page provides an index out of range exception because there are no records in this table N A Table 1 47 Fixed issues for Inventory Solution 3105213 Server class Inv_Reboot_History does not accurately show the restart N A history of a computer 2989297 Application metering drill down report never completes N A Note This fix was successful and it was successfully tested for up to 10 000 entries However the report still times out at 50 000 entries 3018059 The Symantec Management Agent service keeps terminating unexpectedly N A AMAgent crashes the process AeXNSAgentHostSurrogate32 exe 3041497 Custom Inventory Tasks SWD task remain in a Running status N A Table 1 48 Fixed issues for Software Management Framework 3108518 Agent Service Start causes update system settings message followed by TECH202915 a restart 2702662 Multiple entries for software with different versions are present in the TECH182434 Installed Software reports and resource lists when software is upgraded 3095493 The SMF agent gets into a hung state Policies do not execute until Agent N A restart or user log on 55 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v3 Table 1 48 Fixed issues for Software Management Framework continued 3048833 Delayed job runs on client computers regardless of schedul
62. p check Monitor uncheck all other options and then click Install All the existing files are replaced with the newer ones The rollup installation may take a few minutes to finish Warning This installation restarts Altiris services and Web services The information about the rollup version is placed into the registry under HKLM gt SOFTWARE gt ALTIRIS gt POINTFIXES Reverting the Symantec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided by the Rollup This rollup does not have an uninstall option for the Symantec Management Platform SMP Instead it has a Revert to MP1 option After you revert the SMP back to 7 1 SP2 MP1 1 reapply any Point fixes and rollups that you installed before the Rollup v11 See To revert the Symantec Management Platform SMP to 7 1 SP2 MP1 1 on page 24 See To uninstall Inventory Solution provided with this rollup on page 24 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 24 Reverting the Symantec Management Platform SMP back to its 7 1 SP2 MP1 1 and uninstalling the updates provided by the Rollup See To uninstall the updated Inventory Solution Inventory Pack for Servers and Application Metering Agents provided with this rollup on page 25 See To uninstall the updated Symantec Management Agent SMA provided with this rollup on page 25 See To uninstall the UNIX Linux Mac Agent provided with this
63. r Task Server 3286349 Client task agent may crash when writing debug log information N A 3323373 An error message A critical error has occurred on this page Check the Altiris logs for more information is displayed when attempting to create a server job that contains conditional tasks N A Table 1 19 Fixed issues for Inventory Solution 3207660 Network Devices with resource type UPS are not listed in Agentless Inventory N A Individual device drop down list 3196885 Inconsistent data is shown in the Installed Software report and the N A corresponding drill down report Table 1 20 Fixed issues for Deployment Solution 3301127 DriverManager fails to import the HP Workstation driver when using the N A command line switch 3267748 Renaming the Apply System Configuration task resets the counter for the N A computer name to 0 Note After applying Deployment Solution v8 you need to run the Apply System Configuration task once before you can rename it for this fix to work 3299938 Executing the Apply System Configuration task on a client computer N A running Deployment Solution V7 rollup causes error messages to appear in the Notification Server log viewer 3142606 The DeployAnywhere command line switch logpath doesn t work N A 3401910 DS Plug in Filters is not updated in ITMS 7 1 SP2 MP1 Rollup v7 N A Table 1 21 Fixed issues for Software Management Framework 3289516
64. rollup on page 25 See To uninstall Deployment Solution DS provided with this rollup on page 26 See To uninstall the updated Deployment Solution Agents provided with this rollup for a 32 bit client computer on page 26 See To uninstall the updated Deployment Solution Agents provided with this rollup for a 64 bit client computer on page 27 See To uninstall the updated Deployment Automation Folder provided with this rollup on page 27 See To uninstall Patch Management Solution provided with this rollup on page 28 See To uninstall the updated Patch Management Solution Agents provided with this rollup on page 28 See To uninstall Asset Management Solution provided with this Rollup on page 28 To revert the Symantec Management Platform SMP to 7 1 SP2 MP1 1 1 Open the folder to which rollup files were extracted 2 Right click PFInstaller2 utility and then click Run as administrator By default all rollups are checked 3 Check SMP uncheck all other options and then click Uninstall Assemblies are restored from the Backup folder It restores the SMP to the 7 1 SP2 MP1 1 state 4 Reapply the latest Notification Server point fixes and rollups which were applied before you installed the Rollup v11 Warning This installation restarts Altiris Services and Web services To uninstall Inventory Solution provided with this rollup 1 Open the folder to which rollup files were extracted
65. s Services and Web services IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 29 Known issues in Rollup v11 Known issues in Rollup v11 Table 1 2 Known issues in Rollup v11 Software After rollup installation Import Software resources are blocked if Java 3434223 Management pre 7u57 is installed Framework Fixed issues in Rollup v11 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v11 If additional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixes that were included in Rollup v10 v9 v8 v7 v6 v5 v4 v3 v2 and v1 are also included in this release See Fixed Issues in Rollup v10 on page 32 See Fixed Issues in Rollup v9 on page 35 See Fixed issues in Rollup v8 on page 37 See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 3 Fixed issues for Notification Server 3501453 Symantec Management Agent service stops while trying to enumerate the N A HASP License Manager service state The HASP License Manager service has an invalid service state value
66. s for Software Management Framework 3385874 Renaming the Managed Software Delivery Policy does not change the N A name of the _DefaultPolicy 3359270 Import Software resources task is blocked by future security update for N A Java if the JAR file manifest does not contain the permission attribute 3351428 Agent fails to update package after it was updated during Quick Delivery N A Task execution Table 1 15 Fixed issues for Inventory Solution 3388486 Resource Manager times out when loading data from Processor data class N A 3123693 Wrong percentages in the How current is my computer inventory web N A part 3158018 Software Inventory is appending 00 to two digit year install dates on N A Windows Patches thus the NSEs fail to process with error CommitBatch Couldn t update table dbo Inv_SW Patch Windows 3228228 AeXNSAgentHostSurrogate32 handle count continues to constantly grow N A every time an inventory policy runs on Windows 7 x64 client computer Table 1 16 Fixed issues for Patch Management Solution 3190654 Deadlocks in the PMImport process on N A spPMCore GetAllSoftwareUpdateTasksWithNoAdvertisement 3303592 Error No rows returned by N A spPMWin_GetConfigInfoForSoftwareUpdate for Software Update lt Guid gt 3216482 Post Replication Task on the Child NS is completed with an error while N A synchronizing the catalog xm1 from the Parent NS Fixed issues in
67. s selected 3180565 Run Script task on server removes a part of a Script when you use the N A signs within the script Table 1 25 Fixed issues for Asset Management Solution 3229268 Asset Search report does not display active assets TECH208821 3238013 Parameter Value Providers behavior in some default and some custom Asset reports N A Table 1 26 Fixed issues for Inventory Solution 3228349 spSoftwareToProductAssociation takes longer than 18 minutes N A 3137846 Inv_HW_Processor_Name_Windows is not included to replication N A 2830662 Error message SetColumn Couldn t set Installed Date appears in NSLogs N A after you run the Collect Full Inventory Task 43 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v6 Table 1 26 Fixed issues for Inventory Solution continued 3304876 Altiris AppMeteringAgent plug in stop time is longer than 10 seconds N A 3304881 Agent crash in MAgent DilUnregisterSErvert d33a N A 3044310 After agents are upgraded to 7 1 SP2 MP1 1 the application metering agent N A randomly crashes the SMA agent Fatal error occurs in module AMAgent dll in AeXNSAgentHostSurrogate32 exe 3304878 Each time the Agent with Application Metering plug in updates N A configuration memory usage increases and is never released for AeXNSAgentHostSurrogate32 exe Table 1 27 Fixed issues for Sof
68. t http symantec com docs TECH198556 If you need to upgrade to ITMS 7 1 SP2 MP1 1 refer to the knowledge base article Upgrading to ITMS 7 1 SP2 MP1 1 Best Practices at http www symantec com docs TECH197966 For additional information about the 7 1 SP2 MP1 1 release refer to the IT Management Suite 7 1 SP2 MP1 1 Release Notes at http www symantec com docs DOC5955 6 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 7 Before you install this rollup For additional information about the 7 1 SP2 MP1 release refer to the T Management Suite 7 1 SP2 MP1 Release Notes at http www symantec com docs DOC6052 Before you install this rollup Symantec recommends that you apply this rollup within a maintenance window when the Symantec Management Platform SMP experiences minimal activity When the rollup is installed the cache is cleared automatically If you want to keep the cache before you install ITMS 7 1 SP2 MP1 Rollup v11 do the following a On the Notification Server computer navigate to the smP Files folder and remove clear cash cmd a On the Notification Server computer navigate to the smp Backup folder and remove clear cache bat After you install the rollup you may see errors in the log The number of errors depends on the level of Symantec Management Platform activity The less activity the smaller is the number of errors Warning Do not open the c windows assembly gac_msil
69. t always removed from Core Settings file N A which can cause Symantec Management Console to stop responding 3198610 Task start time is displayed incorrectly on reoccurring schedules N A 3282414 Failed to populate Status page in Resource Manager for some replicated TECH210175 data classes because of ForwardDate value conversion from date to string 3220704 The security groups created in Active Directory are limited to 107 members N A 3011510 Inconsistent Task Status Reporting results are not fully replicated to the N A Parent Notification Server 3293911 ResourceTargetContainerChanges can be performance bottleneck for N A various collection target updates between Complete membership update schedule runs IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v8 Table 1 17 Fixed issues for Symantec Management Platform Notification Server continued 3304264 All members between cross domains are not imported when using the Role N A and Account import rule within AD Import 3228962 By default the custom filter created using Query Builder adds all resources N A from the database for collection membership update 2924981 MaxConcurrentSlowMsgsThreadPoolSize setting in coresettings config N A file of the NSConfigurator exe tool sets the number of threads for the default queue rather than the slow queue 2809049 Default Notification Server cache size is insuff
70. t downloaded if it has already been downloaded previously N A Table 1 5 Fixed issues for Inventory Solution 3599957 In 7 1 SP2 MP1 V8 Application Metering crashes Symantec Management N A Agent 3403980 After the upgrade from Notification Server 6 fn_Processor_View_ByGuid N A fails to run 3599954 Product based usage tracking policy cannot be loaded if the file inventory N A has an xml tag in it 30 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v11 Table 1 5 Fixed issues for Inventory Solution continued 3656639 Inventory fails and the pop up notifications from regsvr32 for the N A InvProvider dll appear 3633230 On Windows 7 x64 client computers every time an inventory policy runs N A the handle count continues to grow 3521287 File inventory fails to load if it contains Danish characters N A Table 1 6 Fixed issues for Deployment Solution 3565971 Apply System Configuration task to rename a client computer fails when N A executed after the Deploy Image task 3424963 When a Copy File task is cloned it also clones the security permissions N A even if it is modified 3646529 The SSL protocol 3 0 as used in OpenSSL through 1 0 1i and other products N A uses nondeterministic CBC padding which makes it easier for man in the middle attackers to obtain cleartext data via a padding oracle attack aka the POODLE iss
71. t of fixes for the following components Table 1 1 Symantec Management Platform NS Core Data The server side components should have the 7 1 8480 Connector task server and Software Management version Framework This package contains the server side and the agent side fixes that were provided to customers these fixes were not included in the 7 1 SP2 MP1 release See Fixed issues in Rollup v11 on page 29 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Prerequisites Table 1 1 continued Symantec Management Agent 7 1 15495 8495 Inventory Solution 7 1 7900 0 Application Metering plug in 7 1 7900 0 Inventory Pack for Servers plug in 7 1 7870 0 Package server 7 1 15445 Task server version that is included in Rollup v11 7 1 8480 UNIX Linux Mac ULM Agent 7 1 8411 Deployment Solution 7 1 7862 Patch Management Solution 7 1 7875 Asset Management Solution 7 1 7858 Monitor Solution 7 1 7875 Pluggable Protocols Architecture Agent 7 1 8400 Prerequisites IT Management Suite 7 1 SP2 MP1 1 You must install ITMS 7 1 SP2 MP1 1 before you install the ITMS 7 1 SP2 MP1 Rollup v11 The ITMS 7 1 SP2 MP1 1 release addresses a stored procedure issue in the MP1 release For more information about this issue refer to the knowledge base article KNOWN ISSUE ITMS 7 1 SP2 MP1 Failed to load resource associations The user does not have permission to perform this action a
72. t task fails because the client computers connects to N A different site servers after the reboot 3428759 In some cases no task servers are available for the client computers N A Table 1 10 Fixed issues for Inventory Solution 3505225 Installed File Details data class partialupdate is set to true instead of false N A 3471610 Data classes are missing from the hardware inventory The Agent appears N A to collect the data but it is not merged into the NSI 3344922 Uninstalling Application Metering Plug in on Windows7 x86 client computers TECH222614 removes the LoadAppInit_DLLs registry value 3516330 Some files that have been removed from the client computer are not removed N A from the database by the Inventory file scan 34 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 35 Fixed Issues in Rollup v9 Table 1 11 Fixed issues for Unix Linux Mac 3530927 OpenSSL was updated in this release as it is described in Security Advisory N A CVE 2014 0224 For more information please see https Awww openssl org news secadv_20140605 txt Fixed Issues in Rollup v9 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v9 If additional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixes that were included in Rollup v8 v7 v6 v5 v4 v3 v
73. temode for the resource association is completeset instead of N A appendupdaterows 2840038 Data Connector 7 1 2 does not import all values from multi valued attribute N A in LDAP Table 1 54 Fixed issues for Inventory Rule Management 2631036 IRM does not import the synchronization policy during the upgrade N A Table 1 55 Fixed issues for Inventory Solution 2951507 Server Inventory causes Oracle to hang N A 2983795 Inventory Task with the Printer data class selected crashes the Symantec N A Management Agent 2756221 Cannot import software resource Error message reads unable to merge N A the specified duplicate resources 2719712 aexauditpls exe 7 1 sp2 crashes during inventory scan when it interacts N A with SVS 2 1 3071 2994279 Application Metering 7 1 SP2 MP1 plug in DLL s should be signed to prevent N A misidentification by Malware Virus Scanning software 59 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v3 Table 1 56 Fixed issues for Software Management Framework 3043267 The SMF agent hangs Policies do not execute until the agent is restarted N A or a user logs on 2958460 AeXNSAgent exe crashes due to Access Violation in N A SMFAgent CoBaseJoblitems DoGetltem when called by out of process COM program Table 1 57 Fixed issues for Deployment Solution 2958411 Firm exe fails to execute when called from any
74. tware Management Framework 3193741 Import of the big package to Software Library or by using UNC does not N A work properly 3111615 The hashes in the itemreplication table on the child get set with an invalid TECH204681 hash and are never updated Replication continuously replicates the items Table 1 28 Fixed issues for Deployment Solution 3032790 Apply System Configuration tasks do not replicate or function properly N A in Hierarchy Associated configurations may not be replicated until Differential is run 3260487 RILO inventory shows up as errors even though it is successful on the N A Symantec Management Platform 3256644 FIRM has problems or seems to have problems copying to EFI systems N A even if in BIOS mode 3241767 Bootwiz generates driverdb xml file that contains invalid for xml N A characters which cause the DriverDB to be unavailable on the console Fixed issues in Rollup v6 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v6 If additional information about an issue is available you can access it by clicking the Article ID link 44 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes 45 Fixed issues in Rollup v6 Note that N A Not Available The fixed issues are separated into the following IT Management Suite products and components a Symantec Management Platform Notification Server Se
75. ue Table 1 7 Fixed issues for Software Management Solution 3433223 The Software Management Solution licenses for computers for which the N A Asset Status is set to Retired are not released 3597704 Scheduled Tasks generated by the Software Portal are not removed after TECH218341 the task data is purged 3204093 The Request Confirmation dialog box may be placed on the screens with N A small resolution in a way that would put the OK and Cancel buttons outside the visible area 3638633 Replication of File Baseline task causes a recursive save of task until N A AeXSve crashes 3659863 The list of software deliveries available for a computer is empty on the N A Software Delivery tab of the Symantec Management Agent dialog box N A 3641993 Duplicate entries may be created in inv_addremoveprogram and N A inv_installedsoftware after patches are applied for the corresponding software IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed Issues in Rollup v10 Table 1 7 Fixed issues for Software Management Solution continued 3312144 Software Delivery tab of the Symantec Management Agent dialog fails to N A load with an error 3641919 Running Delta Software Inventory may create duplicate software resource N A entries 3641905 Symantec Management Agent version 7 1 8480 7 1 SP2 MP1 rollup v10 N A stops responding and throws an exception Fixed Issues in Roll
76. up v10 3456780 The following list contains the currently reported fixes that are included in this SMP 7 1 SP2 MP1 Rollup v10 If additional information about an issue is available you can access it by clicking the Article ID link Note that N A Not Available The fixes that were included in Rollup v9 v8 v7 v6 v5 v4 v3 v2 and v1 are also included in this release See Fixed Issues in Rollup v9 on page 35 See Fixed issues in Rollup v8 on page 37 See Fixed issues in Rollup v7 on page 41 See Fixed issues in Rollup v6 on page 44 See Fixed issues in Rollup v5 on page 49 See Fixed issues in Rollup v4 on page 53 See Fixed issues in Rollup v3 on page 56 See Fixed issues in Rollup v2 on page 61 See Fixed issues in Rollup v1 on page 63 Table 1 8 Fixed issues for Symantec Management Platform Notification Server The privileges of the cloned Symantec Administrator role are wrong N A 3291787 Creating reports in the Query Builder with the Use resource type N A association option produces incorrect results 32 IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed Issues in Rollup v10 Table 1 8 Fixed issues for Symantec Management Platform Notification Server continued 3455306 Resource Import Rules fail with the following error message An error occurres while getting task percent complete from Task Manager Web service d
77. uring Active Directory Import TECH215635 3455433 Differential replication fails to detect that the replication is not needed and takes over 20 hours to complete N A 3302210 70 of the emails that are sent by an automated email policy are not sent A timeout error message is displayed N A 3428518 The filter query incorrectly populates the memberships for the filters that are created after a site was imported using Active Directory Import TECH215012 3490633 It is not possible to save changes to a filter if two administrators are editing the same filter at the same time TECH216749 3497203 The filter pickers cannot show the names of the Organizational Units If there are matching Organizational Unit names in a multi forest domain it is unclear to which forest each unit belongs N A 3428786 NS Package Refresh schedule takes more than 24 hours to run instead of less than an hour TECH214832 3469152 Even though the targets are selected Symantec Management installation cannot be pushed to them The following error message is displayed Cannot enable the schedule at least one resource target must be selected N A 3530270 When you add a resource to a filter the following error message is displayed An error has occurred Please try the page and performing the action again TECH218061 3390110 User based scheduled policies on fast boot computers with a qui
78. y than expected 3132874 When your edit a report the entire Parameterized Query section randomly TECH206296 disappears 2961491 AD Import NSE fails to process The following error message is displayed N A CommitBatch Couldn t update table dbo Evt _Resource _Merge 2990598 The processing of PkgSvrStatusEvents from multiple package servers at TECH202799 the same time causes conflicts in Codebaseinfo and Packagelnfo temporary tables 3138854 Replication does not work for nested group after you change the replication N A rule configuration 3151316 Database view vTcplpAddress issue N A Due to one of conditions failed i e AND cip DHCPEnabled vip Complex vip Routable in this view discovered computers are filtered out from this view 2762963 Symantec Management Agent does not switch to VPN connection TECH203999 3056837 The AD Import of Security Groups is limited to 1499 resources only TECH206298 3062491 Agent hangs after it receives an SWD policy TECH206299 3070246 The OS s ProgramData folder is not scoped for most server build standards TECH205993 to have large amounts of disk space available for a single application A core setting or registry entry is needed to provide an alternate path for Replication s temp folders IT Management Suite 7 1 SP2 MP1 Rollup Version 11 Release Notes Fixed issues in Rollup v5 Table 1 37 Server continued Fixed issues for Symantec M

IT Management Suite 7.1 SP2 MP1 Rollup Version 11 Release Notes

Contents

Download Pdf Manuals

Related Search

Related Contents