Model: ST929R
Contents
1. 1 5V required not supplied INSTRUCTIONS ON ENVIRONMENT PROTECTION DO NOT DISPOSE OF THIS PRODUCT IN THE USUAL HOUSEHOLD WASTE AT THE END OF ITS LIFECYCLE HAND IT OVERATA COLLECTION POINT FOR THE RECYCLING OF ELECTRICAL AND ELECTRONIC APPLIANCES THE SYMBOL ON THE PRODUCT THE INSTRUCTIONS FOR USE OR THE PACKING WILL INFORM THEM ABOUT THE METHODS FOR DISPOSAL THE MATERIALS ARE RECYCLABLE AS INDICATED BY THE SYMBOL ON THE LEFT BY RECYCLING MATERIAL RECYCLING OR OTHER FORMS OF RE UTILIZATION OF OLD APPLIANCES YOU ARE MAKING AN IMPORTANT CONTRIBUTION TO PROTECT THE ENVIRONMENT PLEASE CONTACT YOUR LOCAL COUNCIL FOR INFORMATION ON THE AUTHORIZED DISPOSAL LOCATION AND RECYCLING FACILITIES2. Function Selector 9 to USB SD Mode and then press the Source Button 4 to select either USB or SD Mode A DELETING A SINGLE FILE With the USB device SD Card you wish to delete a track from connected 1 Press and hold the INFO Button on the Remote Control for 3 seconds and the LCD Display 2 will show DEL 001 2 Press the Skip Forward l or Backwardl 4 Button to select the file to be deleted 3 Press the REC Button to enter YES NO Mode and then press Skip Forward gt gt l or Backward to select YES or NO 4 Press the REC Button to confirm the setting B DELETING ALL FILES To delete all the files tracks on the USB device SD Card connected 1 Press and hold the INFO Button on the Remote for 3 seconds and the LCD Display 2 will show DEL 001 2 Press the INFO Button again to enter YES NO Mode and then press skip forward gt gt I or backwardl lt lt to select YES or NO 3 Press the REC Button to confirm the setting 4 Press the STOP W Button once on the Remote handset to exit the Delete Mode NOTE All files on the USB storage device or SD MMC Card will be fully and permanently deleted after YES has been selected and confirmed REMOVAL OF A USB DEVICE MEMORY CARD It is not safe to remove the USB device Memory Card until the main Power Knob is switched to OFF 17 or the Function is switched to either AU
3. again to disable this function E 3 SONG TITLE FOLDER NAME SEARCH FUNCTION BY REMOTE HANDSET You can search for a track on a USB Device or Memory Card by the title folder name while it is playing 1 Press the FIND Button on the Remote once then press the Skip Search Up gt gt I or Skip Search Down i44 Button you can search for the Title of each song one by one in alphabetical order on the LCD Display 2 then press the Play Pause Stop Button to start playback of the selected track 2 Press the FIND Button again the Folder Name will be being displayed Then press the Skip Search Up gt gt l or Skip Search Downl 4 Button to select the desired folder then press the Play Pause Stop Button 14 to start playback of all tracks inside the selected Folder NOTES In case no name has been assigned for the Track NO FILE will be displayed on the LCD Display 2 If no Folder has been found on the USB device SD Card it will show ROOT on the LCD Display 2 The LCD Display supports the English alphabet and numbers only MP3 Track Format requirement MP3 bit rate 32 KBPS 256 KBPS and WMA bit rate 32 KBPS 320 KBPS REPEAT INTRO RANDOM MODE BY REMOTE HANDSET Press the Repeat Intro Random Button before or during playback a single track single folder or all the tracks can be played in different Modes as follows 1 REPEAT 1 gt 2 REPEAT ALL TRACKS 3 REPEAT O
4. function to activate the record player 2 Move the 33 45 78rpm Speed Selector Switch 22 to the correct setting for the record to be played 3 Place a record on the turntable platter Use the 45rpm Spindle Adaptor if required Note To play a 45rpm record which has the centre clip missing first place the supplied 45rpm Spindle Adaptor 21 onto the centre spindle Please note this will not be necessary if the record centre clip is still in place 4 Lift the Tone Arm and move it slowly towards the record the turntable will start rotating then gently lower it onto the edge of the record the record will start playing a 5 Adjust the sound volume to the desired level by turning the Power Volume Knob 17 aligning the dot on the bevelled rim with one of the 3 markers at the side of the knob 6 To adjust the spinning speed while a record is playing rotate the Pitch Control Knob 18 7 When the record has stopped playing the turntable will automatically stop rotating t 8 Liftthe Tone Arm and return it to the Arm Rest 23 Note Pitch Control This unit has Pitch Adjustment 18 While playing a record adjust the spinning speed as required by turning the knob in small increments to or AUTO STOP FUNCTION Some longer records will stop playing before the last track has finished as the Auto Stop area is set outside the area pre set for the unit If that is the case move the Auto Stop On Off Switch 25 on the
5. rear of the unit to the OFF position the Tone Arm will then carry on playing to the end of the record However the turntable will continue rotating and will not stop automatically To stop the turntable rotating turn the unit off 17 or switch the Auto Stop Switch back to the ON position then return the Tone Arm manually to the Arm Rest 23 Note With the Auto Stop Switch set at the OFF position the turntable will start rotating as soon as the Phono Function 9 is selected STYLUS and STYLUS ASSEMBLY REPLACEMENT If you need to replace the factory fitted Stylus a replacement universal sapphire needle or stylus is available for purchase direct from the manufacturer this will play 33 5 45 amp 78rpm records 1 To remove the Stylus from the Tone Arm hold the Tone Arm Head steady while grabbing the red plastic stylus holder with two fingers then gently pull the complete red stylus holder towards you and down as shown in the diagram below K 2 2 To fit another Stylus hold the sides of the red plastic stylus holder ensuring the needle is facing downwards Gently push the back of the stylus holder against the black cartridge at the end of the tone arm and clip it upwards until you are sure it is securely fitted Refit the protective needle cover if so required 3 To remove the whole Stylus assembly from the Tone Arm hold the Tone Arm Head steady lift up the black tab above the stylus holder J 1 whilst g
6. using a Memory Card insert this in the direction of the arrow as shown on the marking underneath the memory card Slot Insert it straight without bending it e Connecting the USB SD card upside down or back to front could damage the audio system or the storage device USB Flash Drive SD MMC card Before connecting double check to make sure the direction of insertion is correct 3 The system will start reading a storage device automatically after connection and the LCD Display will show the total number of MP3 WMA files and the total number of folders detected Important Notes e itis not possible to connect an MP3 Player or Flash Drive to the USB Port via a USB Extension Cable e The USB Port is not designed for connection to a Computer PLAY PAUSE STOP MODE gt Il E 1 Press the Play Pause Stop button 14 to start playback the first track will start playing 2 To interrupt the music press the Play Pause Stop button 14 once the playing time will freeze amp flash on the LCD Display 2 and the music will pause temporarily 3 Press the button again to resume normal playback 4 Press and hold the Play Pause Stop button 14 for 2 seconds during Playback Mode playback will stop SKIP SEARCH MODE SKIP SEARCH UP gt gt I SKIP SEARCH DOWN l lt 44 1 During either Play or Pause Mode press the Skip Up Button 19 to skip to the next track the track number will be displayed it will either
7. 4 steenletone Model ST929R 3 SPEED STEREO RECORD PLAYER WITH USB SD MP3 PLAYBACK amp ENCODING INSTRUCTION MANUAL Please read before use lt lt gt gt aa D 4 MIZ I ICD a dP Track Separation N CO DE TURNTABLE PLAYBACK VYD PA LOCATION OF CONTROLS OONDOOABRWNDN gt _ eZ eS he ee ee ee ee 10 USB Port 11 SD MMC Card Slot 12 X Bass On Off Button 13 Record Button 14 Play Pause Stop Pll H Button 15 Remote Control Sensor 16 Right Speaker 17 Power On Off Volume knob 18 Pitch Adjustment Knob 19 Skip Up gt I Button 20 Skip Downl 4 Button 21 45rpm Spindle Adaptor 22 Turntable Speed Selector Dust Cover LCD Display MP3 Folder Up Button Source Button Power LED Indicator 3 5mm dia Aux In Jack Left Speaker 3 5mm dia headphone Jack Function Selector Aux Phono USB SD 23 Tone Arm Rest 24 Line Out Socket RCA 25 Auto Stop On Off Switch 26 AC Power Cord 27 Subwoofer Socket CAUTION Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure This unit should not be adjusted modified or repaired by anyone except qualified service personnel PRECAUTIONS FOR USE INSTALLATION Unpack all parts and remove protective material Please keep all packaging until you have fully checked all parts of the unit are working correctly and for future use in case the unit needs servic
8. NE FOLDER f 6 OFF MODE lt 5 RANDOM lt 4 INTRO PLAY INDICATOR PLAY MODE ON LCD DISPLAY REPEAT A SINGLE TRACK REPEAT ALL TRACKS C ALL REPEAT A SINGLE FOLDER ffowwen INTRO PLAY MODE INTRO RANDOM MODE RANDOM OFF MODE wennnnnnnnnnnnnn REPEAT PLAY This function allows you to listen repeatedly to the desired track or folder INTRO PLAY This function allows you to listen to the first 10 seconds of each track amp saves time when searching for a particular song RANDOM PLAY This function allows you to listen to all tracks or a folder in random order TRACKS PROGRAMMING BY REMOTE CONTROL Up to 32 tracks can be programmed to play MP3 WMA music files in any order Before using this function be sure a USB device or SD Card is connected and the system is in STOP Mode 1 2 oo gt Select the USB SD Function and set it at Stop Mode Press the Program Button PROG will appear on the LCD Display 2 The Program Number and digits of the track numbers to be programmed will also be shown Select a track by pressing the Skip Search Up gt gt l or Skip Search Down M4 Buttons Press the PROGRAM Button to store the track number into memory Repeat steps 3 and 4 to enter additional tracks into memory as required When all the desired tracks have been programmed press the Play Pause Stop PAI W Button to play the tracks in the programmed order To cance
9. ORWARDP gt I SKIP SEARCH BACKWARDI 8 STOPE 9 FOLDER UPA DOWNY 10 SOURCE 11 TRACK SEPARATION In MP3 WMA Mode press to activate File Folder Name Search Function In Phono Stop Mode press to select the Encoding Bit Rate Press for USB SD File deletion function Press to activate Recording or Copy Function In USB SD Mode press to activate Repeat Intro Random Function In USB SD Mode press to activate Programming Function In USB SD Mode press once to Start Playback Press again to enter Pause Mode Press once to skip to the next track press amp hold to search forward Press once to skip to the previous track press amp hold to search backward In USB SD Mode press to Stop Playback or cancel a stored program or exit the Delete Mode In MP3 Mode press to select Folder Up or Down In USB SD Mode press repeatedly to select USB or SD function Press to separate the turntable tracks during recording E 7 SPECIFICATIONS Speaker Max Output 14 Watts Output Wattage RMS 2x 1 5W Speaker Ohms 4Q Subwoofer Jack Output to an active Subwoofer not supplied Please contact your supplier to purchase a suitable Subwoofer e g Steepletone Subwoofer Model T 008 USB 2 0 Port SD Card Slot Supports up to 2GB Flash Memory of MP3 Player Flash Drive SD MMC Card Power Source None supplied 230V AC Mains 50Hz Accessory supplied Infra red Remote Control Handset Batteries for Remote Transmitter 2 X AAA
10. X or PHONO mode e USB PORT Unplug the device from the USB Socket by pulling it out straight e MEMORY CARD Press the Memory Card in gently and then release it the card will be partially ejected and can then be removed by hand LINE OUT CONNECTION You can connect the system to another Hi Fi System by connecting the Line Out Socket 24 to the Auxiliary Input socket of the other Audio Unit Amp PC etc with an RCA cable L R cable not included AUX IN CONNECTION You can connect another audio device e g a Cassette Player iPOD CD Player via its Headphone Output Jack and a cable with 3 5mm dia plug to this system Plug it into the Aux in Socket 6 on the front of this unit for either playback or encoding recording to MP3 USB SD X BASS OPTION To add extra Bass sound press this button press it again to switch this function off SUBWOOFER JACK Connect a powered Subwoofer to the Subwoofer Jack 27 on the rear of this unit to add extra BASS sound E 6 REMOTE CONTROL TRANSMITTER FIND INFO U REC m REP INTRO RAN PROGRAM Pil CO 144 SKIP SEARCH PPI CO YED A SOURCE CO OO wes M L REMOTE CONTROL UNIT BATTERY INSTALLATION Batteries not supplied The Infra Red Transmitter Remote Control Handset requires 2 x AAA 1 5V size batteries for operation BUTTON DESCRIPTION 1 FIND 2 INFO 3 REC 4 REP INTRO RAN 5 PROGRAM 6 PLAY PAUSEPII 7 SKIP SEARCH F
11. ing Please ensure the Remote Control has been located before storing the packaging This unit is operated by 230V 50Hz AC Mains only Do not connect the unit to the mains before checking the mains voltage is correct for your home and before all other connections have been made When positioning the unit never cover any vents and make sure that there is a space of several centimeters around the unit for ventilation CONNECTION 1 2 3 4 Connect the Power Cord 26 to a 230V AC Mains Power outlet Turn the POWER VOL Knob 17 in a clockwise direction until the red Power LED Indicator 5 and the blue LCD Display backlight 2 light up This indicates the unit is correctly connected to the mains power supply Your system is now ready for use Switch the Function Selector 9 to AUX PHONO or USB SD position and depending on the position of this switch the display will show AUX PHONO or NO USB E 1 TURNTABLE OPERATION GETTING STARTED Lift up the hinged cover and remove any sticky tape and any other packing ye materials Carttridge Remove the black tie wrap and lift off the hold down clip which secure the Tone Arm to the Tone Arm Rest 23 during transportation Slide forward and remove the white protective needle cover to expose the Stylus The Record Player is now ready for use Stylus assembly gt E PLAYING A RECORD 1 Slide the Function Selector 9 to select PHONO
12. l the programmed files press the Stop Button on the Remote Handset until PROG disappears from the LCD Display 2 PHONO ENCODING INTO MP3 FORMAT This system is able to encode 45 33 amp 78rpm records into MP3 format and record these into memory media with a USB connection plug or onto an SD MMC card maximum up to 2GB memory size none supplied Before encoding make sure one of these is connected to the relevant Port Slot and that it has enough free memory space Please note the system does not allow connection via a USB Extension Cord E 4 A ENCODING FROM PHONO Turntable 1 Switch the Function Button 9 to PHONO and then press the Rec Button 13 on the front of the unit or REC on the remote control RC 2 The word USB CARD will flash on the LCD Display 2 then press the Skip Search Up gt gt l or Skip Search Downl 4 Buttons 19 20 to select the desired Source USB or SD for encoding 3 Then press the Rec Button 13 or REC on the RC gt g REC will flash on the LCD Display 2 and the system will start the encoding Mode after a few ati 4 Start playback of the first track on the record you wish to record to USB or SD 5 After the recording has finished press and hold the Rec Button 13 NOTES The recording speed is 1 1 and according to the actual playing time of the record The system will create an AUDIO fo
13. lder and then store the encoding track in it The recording format is preset at MP3 bit rate 128 KBPS sampling rate 44 1kHz To interrupt the recording press the Rec Button 13 again during recording Mode B COPYING OF MP3 WMA FILE The system allows copying of music files from a USB source to SD MMC Card or vice versa by a one touch press of the REC button Select the source which you wish to copy the music file from for example if you want to copy the file from USB to SD Card press the Source Button 4 to select USB Mode 1 COPYING A SINGLE TRACK 1 Select the music file you wish to copy and start playback 2 Press the Rec Button 13 during playback of the track 3 e amp g REG will flash on the LCD Display 2 The music track will be copied from USB to SD Card or vice versa 4 After copying has finished the unit will stop automatically Il COPYING ALL TRACKS 1 Make sure the storage device you wish to copy from is connected to the unit 2 Insert the USB storage device or SD MMC Card to copy the files to max up to 2GB The contents will be read but do not play it back 3 A the contents of the device card has been read press the Rec Button 13 the unit will display gt g REC and flash All tracks will be copied now 4 After copying has finished the unit will stop automatically NOTES If you press the Rec B
14. play that track or remain in Pause Mode 2 During Play or Pause Mode press the Skip Down Button 20 once to go back to the beginning of the track the original track number is displayed it will either play that track or remain in Pause Mode 3 After Step 2 press the Skip Down Button 20 again to go to the previous track it will either play that track or remain in Pause Mode 4 lf you press and hold the Skip Up Down button 19 20 during playback the playing track will fast forward or backward until the button is released then carry on playing that track FOLDER UP CONTROL 1 Press the Folder Up Button 3 the folder number will go up 2 Press the Skip Up Button 19 or Skip Down button 20 the track number will change up or down 3 When the desired track has been selected press the Play Pause Stop PIl H Button to start playback NOTES The system can detect and read files in MP3 or WMA format only through the USB Port or SD Card Slot Due to variances in MP3 encoding format you may find some MP3 Players will not work when connected to the USB socket Please note this is not a malfunction of the system Only MP3 Players Flash Drives SD MMC Cards up to 2GB size can be read by the system ID3 TRACK ALBUM TITLE FUNCTION BY REMOTE HANDSET 1 Press the INFO Button during playback of an MP3 WMA track the song title will be displayed 2 Press the INFO button
15. rabbing the red plastic stylus holder with two fingers then gently pull the complete red stylus holder and tone arm cartridge downwards as shown in the diagram below Ki 2 4 To remove the whole Stylus pick up assembly use small pliers to carefully disconnect the wires H then change to another stylus cartridge and connect the wires to the new stylus again with the pliers Do not pull the pick up wires directly as this may cause damage to the wires Refit as in Diagram fq 1 2 NOTE Always handle the Stylus with care as the needle tip is easily damaged When transporting the turntable it is advisable to refit the protective needle cover until the unit is going to be used again When removing or re fitting the stylus always be careful not to put too much pressure on the Stylus Holder and the Tone Arm Cartridge to avoid causing any possible damage to them PLAYBACK OF MP3 WMA SONGS VIA USB STORAGE MEDIA OR SD MMC MEMORY CARDS CONNECTING The system is able to decode and play back MP3 WMA music files stored in the memory of a device with a USB connecting plug or on an SD MMC memory card size up to 2GB max not supplied 1 Slide the Function Selector 9 to USB SD Mode and then press the Source Button 4 to select either USB or SD Mode If nothing is connected NO USB or NO CARD will show on the display CD _ 2 Plug in the USB device face side up and make sure it goes in re completely or if
16. utton during playback of USB or SD source the file will be copied from USB to SD or SD to USB The system will create an FCOPY folder store for copied tracks C ENCODING BITRATE BY REMOTE HANDSET You can select the desired bit rate during encoding from Phono to USB SD the selectable range is from 32 64 96 128 192 256 KBPS Select the Phono function 9 but remain in Stop Mode Press the Info Button and the LCD Display will show the default bit rate 128KBPS Press the Up gt gt I or Down I lt buttons to select the desired bit rate for encoding Press the Info again to confirm the setting and the LCD Display 2 will show Phono Mode again D TRACK SEPARATION BY REMOTE HANDSET While recording vinyl records the music tracks would normally be recorded as one long track If you wish to separate the tracks while encoding recording from Phono to USB SD press the TS Track Separation Button once on the remote control handset after each track the system will generate a new track and continue the recording the word PHONO flashes up once on the LCD Display 2 to indicate the unit is successfully creating a new track Rae seer DELETING FILES ON USB SD CARD BY REMOTE CONTROL The system is able to erase the music files stored on a USB Flash Drive or SD Card This function is performed with the USB SD Card connected but in Stop Mode The procedure is as follows Slide the
Download Pdf Manuals
Related Search