IS35 Color Display User manual
Contents
1. Units Set the unit of measurement for how you want the data to be displayed Pages Fuel Network Distance Trip Log Distance small Alarms Decimal places Speed mph Damping Key beeps loud Depth ft 4 System Language English US Heading Mr Installation Time ERSTER Backlight a Be Volume Settings Simrad IS35 User manual Decimal places Set the number of decimal places for the boat speed and sea temperature display Language Set the preferred language for the gauge gt Note This is not a network function You need to change all gauges separately System En lish US Fu u us a Key beeps loud Es Change language to English Language English US 1 UK Time ir wld unit will restart Backlight ae Francais gt Note The unit automatically restarts once the language is selected Time Set the preferred time date format and the local time offset Settings Pages Sh ue Vemork ee Li de im 24 11 2014 14 15 ans nl ai Local time offset GMT 06 00 Damping Key beeps Loud a FT Language English US ome Installation P ime Date format dd MM yyyy Backlight OK Cancel Settings Simrad IS35 User manual 35 36 Simulate Sends simulated data to the gauge Note All other gauges on the network continue to display the current boat data and do not change to simulate mode A simulate warning box flashes on2. IS35 Color Display User Manual ENGLISH simrad yachting com Preface Navico is continuously improving this product therefore we retain the right to make changes to the product at any time which may not be reflected in this version of the manual Please contact your nearest Simrad dealer if you require any further assistance It is the owner s sole responsibility to install and use the equipment in a manner that will not cause accidents personal injury or property damage The user of this product is solely responsible for observing safe boating practices NAVICO AND ITS SUBSIDIARIES BRANCHES AND AFFILIATES DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY VIOLATE THE LAW Governing Language This statement any instruction manuals user guides and other information relating to the product Documentation may be translated to or has been translated from another language Translation In the event of any conflict between any Translation of the Documentation the English language version of the Documentation will be the official version of the Documentation This manual represents the product at the time of printing Navico and its subsidiaries branches and affiliates reserve the right to make changes to specifications without notice Copyright Copyright 2015 Navico Holding AS Preface Simrad IS35 User manual 1 2 Warranty The warranty card is s
3. Night mode Night mode color Red X Close Standby Display group All units in the selected Display group will mirror each others light settings Level Adjusts the backlight level from Min 10 to Max 100 in 10 increments Night mode Changes the gauge to Night Mode color palette All gauges in the selected Display group will also change to Night Mode Note Gauge night mode cannot be changed via a Multi Function Display Night mode color Changes the Night Mode color palette Operation Simrad IS35 User manual 11 Pages Static gauge Some pages have a static gauge at the bottom of the display showing two pieces of dynamic data engine trim temperature and an RPM dial Description Description No No 1 Dynamic data field 2 Enginetim 5 RPM Dial 3 Dynamicdatafild 00000000000 gt Note Dynamic data fields on the gauge pages and the static gauge automatically populate and the data type shown depends on what devices are on the network Staticgauge dynamic data field priority order 1 Speed Speed Over Ground preferred Requires GPS paddle wheel Pitot Depth Requires depth data on the network RPM Fuel economy Fuel flow yuRWweN Note When data from two engines is displayed only RPM Engine trim and Engine temperature are shown 12 Operation Simrad IS35 User manual Default fixed data pages Motoring Description Description No 1 RPMDial 2 Dynamicdatafie
4. Histo y Engine Alarmf Engine alarms Alarm Settir gs Custom Damping Engine Alarin TAU ENGINES Slabs system Alarms Enat led Port Installation Siren Enabled via Off All alarms for all engines are off All alarms for all engine are on Individually select which engines Custom alarms will be all on or all off Alarm siren When enabled an audible alarm sounds when an instance is triggered Settings Alafms Pages Fuel Active Alarms Alajms Trip Log Alarm History Active Alarms Alarm Settings Alarm History Damping Engine Alarm Settings Alarm Settings System Alarms Enabled v ingine Alarm Settings Installation i Alarms Enabled v Biren Enabled Settings Simrad IS35 User manual 31 32 Damping Damping rate affects how frequently the data is updated the greater the damping value the smoother the number change will be but the change will also be slower afr Pages CT Fuel Heading 1 sec Lu u Boa Speed 4 sec Heading 1 sec z al Boa Speed 0 sec Damping SOC 1 sec System coc 1 sec SOG 2 sec Installation COG 3 sec 4sec OK 5 sec Acer OK Cancel System From the System menu there are several display and system options available Pages sys Fuel L Trip Log Jnits gt Alarms Jecimal places gt Damping ey beeps loud anguage English US Installation Time Backlight gt Network Befo
5. List 2 Save the update file to a USB mass storage device 3 Connect portable storage device to micro USB slot 4 Select the update file from the USB memory 5 When the details dialog appears press ENTER 6 Press ENTER again to confirm upgrade Settings Simrad IS35 User manual 7 The upgrade progress dialog will appear Press ENTER once upgrade is complete Details SuzukiEngInterface v28 4 USB Mass Storage Settings iset Type fe Remote Upgrad Engine Interface v1 System Settings Upgrade Complete Size Created 01 Engine 100 Jpgrad Modified 12 i Upgrade Complete IS35 Color Display software upgrade 1 Verify software version via the About dialog 2 Save the latest upd file to a USB mass storage device 3 Ensure the gauge power is off 4 Insert USB mass storage device via the USB adaptor 5 Turn the power on The gauge will automatically begin the upgrade procedure 6 A message will appear on the gauge once the update is complete 7 Remove the USB device and replace the USB cover A Warning Do not remove the USB storage device until prompted to do so once the update is complete Removing the USB storage device before the update is complete may cause the gauge to become unresponsive or require repair Settings Simrad IS35 User manual 43 44 Maintenance If the gauge needs to be cleaned use fresh water and a mild soap solution not a detergent Avoid usin
6. of fuel added to the tank into the Amount added section or select Set to full when filling the tank to its maximum capacity Pages Fuel R Refue rete l Trip Log Fuel Used Refuel Alarms Amount added gal Damping Set to full Amount added gal 0080 00 System Installation Set to full Calibrate Fuel used The fuel Used dialog shows how much fuel has been used since last fill from trip reset and seasonal usage continuous recording gt Note If more than one engine is on the network then the Fuel Used data shown is the total for all engines It also lists the data for each engine Pages Fut Trip Log Alarms Damping System Installation Refuel Fug Used gal Seuss Close Refuelling Simrad IS35 User manual Fuel used reset To access reset to zero options select Reset at the bottom of the Fuel Used page Then select the desired reset option from the list Fuel Refuel Fud Used gal Fuel Used TOTAS F since last fill 2 5 Trip None 55 Trp 3 Seasonal Reset Close I gt Note You can reset the total for one engine or all engines Reset option Returns to Fuel Used page Reset Trip fuel used only Reset Seasonal fuel used only Both Reset Trip and Seasonal fuel used Refuelling Simrad IS35 User manual 25 Settings Engine alarms For engine specific alarms an icon will appear on the display and remain on while that alarm instance i
7. 0 Set to full v 12 5 B Add fuel Cancel Note Allpage menus have a settings option Any other option refers to the current page Settings The Settings menu is where display options display settings system settings source selection and calibration can be accessed r FUEL USED Settings mm Pages gal gail Fuel Trip Log 5 75 Ieee mirin Damping a System Settings Installation Operation Simrad IS35 User manual g 10 Example menu structure 1 Press the MENU key 2 Use the UP DOWN and ENTER keys to select and navigate through the menu options Example Access Key beeps dialog via the settings menu m Units Network Decimal place s Units Damping Key beeps DJ Decimal plac s Language Key beeps Installation Time Language En i Quiet Backlight Time Normal Backlight en gt Note Pressing the MENU key once returns you to the previous menu Backlight There are two methods of adjusting the gauge backlight 1 Via the Menu System E keyeeps EE HE Language Key beeps loud Time Language English US Damping FI Time ET sme D TIER Installation Restore defaiilts Simulate About Restore defaiilts About Operation Simrad IS35 User manual 2 Via the Display setup shortcut 3 secs Press and hold the MENU key for three seconds to open the Display setup Display Setup Display group Default Backlight level Max
8. RIM TABS _ Cancel Settings Simrad IS35 User manual 39 Files Access an attached USB device import export system settings template page vessel setup Upgrade the software on the engine gauge and remote devices gt Note Each gauge on the network needs to be upgraded individually Settings Pages allation re esl Seu be E Trip Log Engine Display Setup USB Mass Storage Alarms sauge Limits Engine Interface v101 luf Damping Pop Ups Setup amp System Settings iles System Installation Connecting a Micro USB device 1 Remove USB cover from the rear of the gauge 2 Insert a USB Micro USB adaptor and mass storage device A gt ayy EM Wi END K N EN 40 Settings Simrad IS35 User manual Export system settings 1 Insert a USB Micro USB adaptor and mass storage device 2 Gotothe Files menu 3 Select System Settings 4 Press ENTER to export system settings to the USB mass storage device Installation vse Seu Engine Display Setup E Export System Settings Gauge Limits E Pop Ups Setup Memory card Engine Interface v101 luf 5 System Settings Would you like to export the 2 current system settings to the connected Mass Storage device Files Import system settings 1 Insert a USB Micro USB adaptor and mass storage device 2 Go to the Files menu 3 Select the Settings iset file from the USB memory the details dialog
9. and off atthetop ofthe display Simulating Fuel Key beep loud Trip Log Language English US Alarms Time Damping Backlight gt Installation Restore defaults About Restore defaults Restore all system settings of the gauge to factory defaults Note This is not a network function This only resets and deletes history on the individual gauges selected ee a cr Trip Log Language English US Sele t items to be restored Restoring all settings Alarms Time will equire a restart Damping Backlight All settings X System Simulate 4 Restore defaults About Installation OK Cancel Forced factory reset If the gauge does not respond to the normal restore procedures press and hold the UP DOWN keys while powering the unit on A beep signifies the reset has been completed Settings Simrad IS35 User manual Installation Via the Installation menu access Vessel Setup Engine Display Setup Gauge limits and Pop ups setup dialogs Save and restore user data upgrade the gauge and remote units software via the Files dialog Settings Pages Insfallation Fuel essel Setup rip Log ngine Display Setup Alarms sauge Limits n Damping op Ups Setup Settings System wy les Vessel setup Set the number of engines fuel tanks and total fuel Capacity Pages Installation Trip Lo Engine Display Setu PB 6 ES Nur ber of Engines Alarms Gauge Limits Damping Po
10. d v Enabled Alarm enabled Alarm group multiple alarms At least Enabled one but not all alarms in the group are enabled There is a sub menu with other alarm Enabled groups Select the next level down in the menu to show the alarm status Alarm limits Some alarms may feature an adjustable limit Select the alarm and set the limit in the Alarm Settings menu Alarm Settings No GPS fi Shallow water No GPS fix Enabled v Anchor dep v Enabled 5 5 ft Cancel Enabled 6 0 ft m Settings allow water limit ft Enabled 6 0 ft 28 Settings Simrad IS35 User manual Alarm indication The alarm is triggered if any settings are exceeded Alarms are indicated with an alarm text and an audible alarm optional Alarm Shallow water A Depth lt 6 0 ft Close Acknowledging an alarm An alarm is acknowledged by pressing the ENTER key This removes the alarm notification and silences the alarm In some cases the alarm icon remains on the gauge until the fault is resolved Active alarms Lists active alarms on the network These alarms will be present until the alarm instance is cleared Settings Pages Alafms Fuel Active Alarms Actjve Alarms Shallow water Trip Log Alarm History arm Settings Damping Engine Alarm Settings System Alarms Enabled v Installation siren Enabled v Settings Simrad IS35 User manual 29 30 1 2 3 Alarm histor
11. ed data pages Template pages Enabling disabling a page Replacing adding a page Configuring page data AutoScroll Trip log Start Stop Trip Log Reset Irip Log Refuelling Adding fuel for the first time Adding fuel Fuel used Fuel used reset Contents Simrad IS35 User manual WW CO COON NI Settings Engine alarms System alarms Enabling an alarm alarm On Off Alarms setting status Alarm limits Alarm indication Acknowledging an alarm Active alarms Alarm history Engine alarm settings Alarm siren Damping System Network Configure Units Decimal places Language Time Simulate Restore defaults Forced factory reset Installation Vessel setup Engine display setup Gauge limits Pop Up setup Files Connecting a Micro USB device Export system settings Import system settings Software Remote device software upgrade IS35 Color Display software upgrade Maintenance Specifications Contents Simrad IS35 User manual Simrad IS35 Color Display The Simrad IS35 Color Display is a networked gauge which displays the vessel s engine data and fuel tank information It can also display instrument data including speed depth heading position wind and environmental data measured by optional sensors and other equipment connected to the network Display and keys 2 MENU A y 4 3 3 5 Color LCD DISPLAY 320 x 240 Resolution Page menu Return to previous menu MENU key Lo
12. es Fuel Trip Log Alarms Damping System Installation AutoScroll AutoScrollt me Pages Motor ng 1 2 i Engine 3 a Depth kiston 5 LMJ Motor steer Operation Simrad IS35 User manual Fuel economy 2 Page Options Enabled v 19 3 Select the desired page from the Replace page list Page Options er Enabled v CL Motoring Pages Replace CET Eee 1 Q Motoring E Engine 2 Engine v Fi Depth History 3 D Fuel economy EAR Motor steer er 5 AM Motor steer The selected page is shown in the active pages list Configuring page data Once selected a template page can be configured to show any available system data gt Note A template page cannot be edited until it has been selected and enabled as one of the active display pages 1 Select a page that can be changed l e 2x1 grid 2 Press MENU 3 Select Change data 4 Select the desired field 5 Select the desired data type from the menu options _ Rate of Turn gt _ Trim fab _ Vesse Fuel Used _ Vesse fuel economy GPS _ Vesse fuel economy WTR Vesse fuel range GPS 3 Settings Once selected a tick appears in the check box and the gauge will revert to the page 20 Operation Simrad IS35 User manual The desired data now appears in the selected field Before opting to save you can populate other blank fie
13. g chemical cleaners and hydrocarbons such as diesel petrol etc Checking the keys Make sure that none of the keys are stuck in the down position Checking the connector The connector should be checked by visual inspection only Ensure that the cable is connected correctly and the USB port cover is in place Maintenance Simrad IS35 User manual Specifications Weight 0 28 kg 0 60 Ibs 130 MA at 13 5V LEN 3 Maximum 10 gauges Black Power consumption Network load Color Display 3 5 Diagonal 4 3 Aspect ratio Type Transmissive TFI LCD White LED back light 320 x 240 pixels Illumination White day mode Red Green Blue night mode Protection Safe distance to 0 3 m 1 0 ft compass Temperature 15C to 55 C 5 to 131 F 25 to 65 C 13 to 149 F Specifications Simrad IS35 User manual 45 x L O O Z L 8 8 6 www simrad yachting com CED
14. ing a device in this list brings up additional details and actions Ei ID Serial Meng ne Device Information System ss Network Auto Select Units Sources Decimal places area Boa Sim 1 J20100 Devi Engine Key beeps Diagnostics 153 Color Gauge This del Man facturer Simrad Language Engjne Port Em Ti le Addis 25 all Eng ne Stbd 26 un zu Backlight Insaxe 0 Calibrate Stati s OK Data Settings Simrad IS35 User manual 33 34 Configure All units come pre configured but they can be modified once connected to the network The example below shows how to configure the engine location Engine Device Information eng e Device configuration Device Engine Manufacturer Lowrance Con iguration e Device configuration Software Ver V1 0 Device Engine Cont guration Model MV1 i Addres 25 Eolie Location Device Engine S N 25 Year 2007 or older v Location Port v en N Calibrate Status OK Engir e type 7 me Sthd Data Advinced Options Engir e type Unknown instance 000 Unconfigur Advi nced Options instance 000 Unconfigure Note Configuring the engine location correctly is important when more than one engine is on the network Some devices show additional options specific to the device For example the Calibrate option to allow easy setup of a device Calibration options vary depending on the device Diagnostics NMEA2000 Bus diagnostic data on the network
15. ld 6 Enginetemp 3 Enginetim 7 RPMLimit 4 Dynamic datafield Motoring dynamic data field priority order 1 Speed Speed Over Ground preferred Requires GPS paddle wheel Pitot Depth Requires depth data on the network 2 Vessel fuel economy 3 Vessel fuel rate Operation Simrad IS35 User manual 13 Engine e188 2 95 a 0 34 30 0 ane ft ae 38 4 7 5 163 Dur 1 4 Dynamic data fields 5 Static gauge Engine dynamic data field priority order 1 Alternator voltage 2 Engine temp 3 Engine water pressure Requires a pressure sensor on the network 4 Engine hours 5 Engine trim 14 Operation Simrad IS35 User manual Fuel economy r FUEL USED E mph I I I 4 Vessel fuelremaining 4 Kun rate 2 Dynamic datafeld 5 static gauge 3 Fuelused Fuel dynamic data field priority order 1 Vessel fuel economy GPS 2 Vessel fuel economy water 3 Vessel fuel rate gt Note Vessel Fuel Remaining will only be shown when fuel flow data is available and a fuel storage device such as an EP 85R is on the network Operation Simrad IS35 User manual 15 Additional fixed data pages Depth history gt Note Requires depth data on the network F DEPTH een Depth histogram Dynamic data field EEE mi DEST ETW zu N 0 00 000 Er w osoo oor 00 00 00 Waypoint position 5 Vessel indicator 1 2 Distance to waypoint 6 Cross track err
16. lds by repeating steps 4 and 5 Change data z Save 16 3 nn Cancel la Settings 11 9 i 6 Press MENU 7 Select Save gt Note lf a data type is selected but there is no sensor information on the network the gauge will show as AutoScroll Select AutoScroll from the pages menu Settings hl des Fuel Pages Trip Log cee a0 Alarms AutoScroll time 2sec MO i Damping AutoScroll time 2sec System Installation AutoScroll time can be set between 1 and 10 seconds Settings wm Pages Fuel Trip Log AutoScroll Alarms ETAJ time 2sec utoScroll Damping RutoScroll time 2sec System 1 sec 2sec Installation 3 sec Asec 5 sec 6 sec Operation Simrad IS35 User manual 21 22 Trip log The Trip Log shows trip duration distance average speed and max speed from the time the Trip Log was Started reset hrs TRI 17 37 55 74 9 5 j Dampin Settings i TRI AVG mph TRPMAX mph instalation 125 13 4 Note Trip information is calculated using GPS or the paddlewheel if GPS is not present No Trip Log information is recorded while the Trip Log is stopped Start Stop Trip Log Starts Stops the trip log recording Trig Log TRIP hrs TRIP 0 00 00 0 0 inne a 1 00 00 0 0 TRIP hrs TRIP TRPAVG mph TRPMAX m bs 0 00 01 0 0 0 0 0 TR AVG mph _TRPMAX 0 0 TE tees mn mem mon 50 4 00 Reset Trip Log Resets a
17. ll trip log information to zero MM 17 37 55 219 hrs TRIP P hrs TRIP en 17 42 08 TRPAVG mph TRPMAX m 220 1 00 00 0 0 1 IR AVG___mph__TRPMAX 5 4 Stop trip TRI AVG mph TRPMAX mph 0 0 0 0 Operation Simrad IS35 User manual Refuelling Adding fuel for the first time To accurately calculate fuel capacity fill the tank and select Set to full in the Vessel refuel dialog Estimating existing fuel level incorrectly could result in inaccurate fuel remaining and fuel range calculations 1 Make sure the vessel setup is complete and the number of tanks and total fuel capacity is set to the correct value gt Note The number of tanks and fuel capacity can be updated using the vessel setup dialog in the installation menu or by using the first time start up wizard Settings Pages Insfallation Trip Lo Engine Display Setu P28 6 Ep Nur ber of Engines Alarms sauge Limits Damping Pop Ups Setup Nur ber of Fuel Tanks 1 System my Files l Total Fuel Capacity gal 0180 00 OK Cancel 2 Go to the Refuel dialog via the Settings menu Settings Pages Fud a etue Refit Trip Log Fuel Used Alarms An ount added gal 0000 00 00 Damping Se to full System Calibrate Installation OK Cancel Refuelling Simrad IS35 User manual 23 24 Adding fuel 1 Make sure the vessel setup is complete and the number of tanks and total fuel capacity is set to the correct value 2 Enterthe amount
18. nd press Shortcut to Standby JP and Display setup Scrolls up down through menu set UP DOWN key values active page transition Short bress Enter sub menu p Confirm selection ENTER key Long press Shortcut to Enabled Long press pages Simrad IS35 Color Display Simrad IS35 User manual 7 Default display pages When starting for the first time the gauge is set with five default pages showing engine and system information It is possible to add pages via the Pages menu and to change the template pages via the template page sub menu The information displayed on fixed data pages cannot be edited by the user The type of information shown depends on what devices are connected on the network Note Data fields are prioritized automatically Adding or removing devices from the network may change which data types are displayed on the gauge See the Pages section of this manual for more information on page setup and configuration Page transition Use the UP DOWN keys to scroll through the active pages hrs TRIM 50 34 8 mph i 16 3 ons t i Simrad IS35 Color Display Simrad IS35 User manual Operation Menu operation Page menu The Page menu options vary from page to page Pressing the MENU key once on any page will show the available menu options r FUEL USED gal Amount added gal 0000 0
19. or limit 3 Cross track error limit Static gauge Estimated time to waypoint 16 Operation Simrad IS35 User manual lf the vessel moves out of the cross track error limit the gauge will change to show the direction and distance that the vessel is off course mi DEST ETW ai N 0 00 000 n w o oo o00 90 00 00 0 06mil 0 09 mi 0 06mi mph 16 3 l u 38 4 er 2 4 u So Operation Simrad IS35 User manual 17 Template pages Icon Description Single gauge with RPM 000 0 2x2 grid with RPM 2x1 grid with RPM 2x2 bars grid with RPM Quad bars with RPM Single gauge full screen 2x1 grid full screen 2x2 grid full screen 18 Operation Simrad IS35 User manual Enabling disabling a page To Enable Disable a page you need to first ensure it has been added to the pages list shown in Replacing Adding a page 1 Press the ENTER key on the desired page to open the Enabled Replace dialog 2 Press ENTER to toggle On Off Settings wm Pages Fuel Trip Log Alarms Damping System Installation Pages AutoScroll AutoScrollt me 1 Motor ng 2 i Engine 3 Fuel economy 2 4 oo Single auge fe 5 J Motor steer 4 Replacing adding a page 1 Select the page you want to add replace Page Options Enabled Replace 2 Press the ENTER key to open the Enabled Replace dialog Settings mm Pag
20. p Ups Setup Nur aber of Fuel Tanks 1 System iw Files Total Fuel Capacity gal 0180 00 OK Cancel gt Note These settings are applied to all devices on the network Settings Simrad IS35 User manual 37 38 Engine display setup A maximum of two engine s data can be shown on each gauge If the number of engines is set to two or more in the Vessel Setup select which engine s data should be displayed via the Engine Display Setup Settings Pages allation Trip Log i Alarms Gauge Limits 2 engines available ele Cop ups SEL Enzine 1 Port System iy Files id aie an OK Cancel Gauge limits Set the RPM and vessel fuel rate limits Note These limits are a visual guide on the display and do not set alarms Installation Vessel Setup Engine Display Setup RP Eee U fm Pop Ups Setup betes iw Files ted Line Start 000 ESSEL FUEL RATE OK Cancel Settings Simrad IS35 User manual Example below shows rev limit start line set to 6000 RPM Simulating Pop Up setup Set the threshold and duration that pop up information will be disolayed when the engine trim transmission and lever control is adjusted Pop ups appear when the gauge sees a change in data that is greater than the set threshold Installation Vessel Setup Pof Ups Setup Engine Display Setup ENGI JETRIM Gauge Limits Display Time Pop Ups Setup wy Files k reshold T
21. re the system can be used the data sources need to be configured Sources A data source can be a sensor or a device connected to the network that provide information and commands to other networked devices The data sources are normally configured the first time the system is turned on It should only be necessary to update this data if Settings Simrad IS35 User manual a new source is added data is missing or removed a source has been enabled disabled a sensor replaced or after a network reset Auto Select The Auto Select option looks for all sources connected to the network If more than one source is available for each item the gauge automatically selects from the internal device priority list Settings Pages iih Fuel e Auto Select Trip Log Sources This will reselect or remove any Alarms Decimal places Device List invalid data source selections All Damping Key beeps Diagnostics lt network devices should be anguage croup paaa i Bi you sure you want to do this Installation Time Backlight Device list Shows a list of all devices connected to the Network Settings Pages fo Bab Fuel ie Auto select as Trip Log Sources Mod IID Serial No Alarms Decimal places Device List Sim 1 201002 Damping Key beeps Diagnostics 153 Color Gauge This device anguage croups engeren z5 Installation Time Engine Stbd 26 Backlight i F Select
22. s still valid gt Note For dual engines the alarm icon appears on the side of the display that the engine is configured Icon Alarm description Check engine General engine faults Engine or its related system faults High engine temperature A Warning Engine malfunction Check active alarms for available information fa l 26 Settings Simrad IS35 User manual Power Charge indicator System alarms If a sensor is connected to the network you can enab e alarms by selecting them from the list in the Alarm settings menu Settings Pages Alafms Fuel Active Alarms Trip Log Alarm History D GPS fix DUM Oe Shallow water Damping Engine Alarm Settings Dep water System Alarms Enabled L Anchor Installation Siren Enabled Anchor depth Enabled Enabling an alarm alarm On Off Turns an alarm on or off via the Alarm Settings menu Alarm Settings No GPS fix m Settings Shallow water No GPS fix No GPS fix Enabled Set limit d Enabled Enabled 6 0 ft in an Enabled 5 5 ft Ben v Enabled 5 5 ft Settings Simrad IS35 User manual 27 Alarms setting status When an alarm option is highlighted the Enabled dialog at the bottom of the page will show the alarm settings status and alarm limit gt Note The relevant sensor must be on the network for the alarm to be enabled Alarm Settings Shallow water v Enabled 5 5 ft Enabled Alarm disable
23. upplied as a separate document In case of any queries refer to the brand website of your gauge or system Declaration of Conformity This equipment is intended for use in international waters as coastal sea area administered by countries of the E U and E E A This gauge complies with the following regulations e CE under EMC directive 2004 108 EC e Level 2 devices of the Radio communications Electromagnetic Compatibility standard 2008 The Declaration of conformity is available from www simrad yachting com Preface Simrad IS35 User manual Introduction This manual is a reference guide for operating the Simrad IS35 Color Display Important text that requires special attention is emphasized as follows Note Used to draw attention to a comment or important information A Warning Used when it is necessary to warn personnel that they should proceed carefully to prevent risk of injury and or damage to equipment personnel Software This manual is written for Simrad 1535 Color Display software version 1 0 Please check www simrad yachting com for details on release version Introduction Simrad IS35 User manual 3 Contents Introduction Software Simrad IS35 Color Display Display and keys Default display pages Page transition Operation Menu operation Page menu Settings Backlight Display group Level Night mode Night mode color Pages Static gauge Default fixed data pages Additional fix
24. will appear Press ENTER to confirm import A Warning Importing system settings overwrites all existing system settings and restarts the gauge Settings iset SuzukiEngInterface_v281 luf sj i amp System Settings Ize Are you sure you want to import Created 01 12 2014 A system settings Modified 01 12 2014 Settings Simrad IS35 User manual The display will restart 42 Software About Shows the device information and current software version installed on the gauge Press the MENU key to exit Settings pages pue qos oun E Trip Log Language English US Product 1535 Alarms Time Application 1 0 50 2 1 Damping Backlight Platform 13 0 29944 r1 Simulate Serial number 2692849837 Installation Restore defaults Lar guage pack Standard Up time 2 50 19 hrs copyright 2014 Navico To show the current version of software on a remote device go to the Device List and select the relevant device System Network Auto Select Model ID Serial Ni Eng ne Device Information Units Sources Decimal places ae Boa Sim 1 20100 bevie Engine Key beeps Diagnostics 153 Color Gauge This dg Man ectrer Simrad Language Engjne Port 25 anaes Ti SELES Addas 25 ABRs Eng ne Stbd 26 mal na Backlight Instance 0 Calibrate Stati s OK Data Remote device software upgrade Update the software for NMEA 2000 sensors 1 Verify software version via the Device
25. y The alarm history can be accessed via the Alarm History menu This stores alarm messages until they are manually cleared Settings Pages Ms Fuel Active Alarms Alajm History Trip Log mi larm History 11 44 Shallow water Ackd A Alarms Alarm Settings 24 11 14 Damping Engine Alarm Settings _ shal ow water Raise 1 System Alarms Enabled 1 14 Installation Siren Enabled 11 43 shal Ow water Dsabl 24 11 14 mee i 246 Alarm details Select an alarm instance to show more details of that specific occurrence and the action taken Alarm History Shallow water _ 11 44 Shallow water Raise 24 11 Ta Fe iers Raise ait Shallow water Dsabl Lb 1 Clear a er Shallow water u Zeiss Shallow water Dsabl 24 11 Depth lt 6 0 ft x vlt Ls 4421 Clear Alarm History Open Alarm History list Press ENTER Select Clear all Alarm History Shallow water 14 44 Shallow water Raise 24 11 11 44 Show Details f Raise sia Ay Are you sure you want clear the darai TORT 11 43 Clear all alarm history 24 11 Shall Dsabl 11 43 z4 shallow water sabl oa p i nac PET Settings Simrad IS35 User manual Engine alarm settings Set all Engine Alarms on or off If multiple engines are in use Custom Setting can be used to select which engines alarms are on or off Pages Alarms ue esos il Trip Log Alarm
Download Pdf Manuals
Related Search