Si Compact Quick Start Guide
Contents
1. Clears all current SOLOs Sets fader bank to IN A if not currently on IN A or IN B bank Puts faders into sends on faders mode lighting fader glow accordingly Places FX Return of fader for selected bus on the MONO fader SOLOs the appropriate FX Return channel Selects the ACS to the appropriate FX Return channel NOTE This function may only be enabled if an FX processor is patched to a Stereo Return channel this is achieved from the PATCH function in the inputs window Matrix Buses 1 4 Clears all current SOLOs Puts faders into BUS mode if not currently already selected Puts faders into sends on faders mode lighting fader glow accordingly Places MATRIX MASTER for selected bus for selected bus on the MONO fader SOLOs the selected bus Selects the ACS to the appropriate Matrix bus NOTE Use ALT MTX to have MONO and LR faders send to the selected matrix MONO L amp R meters Soundcraft Si Compact Quick Start Guide 0311 FADER LAYER KEYS Fader Layer Keys change the function of the faders to the LEFT of the L R Master faders 1 2 3 4 5 6 NOTE The GEQ pages are only available when in BUS or MTX mode when the L R or MON0 master is SELected or when FOLLOWing a bus INA Input Layer A nominally all MONO inputs to the system INB Input Layer B nominally all STEREO inputs to the system BUS All Aux Bus Masters in the system MIX All Matrix Masters in the system GEQ LO The low2. Soundcraft Si COMPACT DIGITAL LIVE SOUND CONSOLE Quick Start Guide IMPORTANT Please read this manual carefully before using your mixer for the first time This equipment complies with the EMC directive 2004 108 EC and LVD 2006 95 EC This product is approved to safety standards IEC 60065 2005 A1 2005 EN60065 2006 A1 2006 A1 2008 UL60065 7th Edition CAN CSA E60065 03 A1 2006 And EMC standards EN55103 1 2009 E2 EN55103 2 2009 E2 Warning Any modification or changes made to this device unless explicitly approved by Harman will invalidate the authorisation of this device Operation of an unauthorised device is prohibited under Section 302 of the Communications act of 1934 as amended and Subpart 1 of Part 2 of Chapter 47 of the Code of Federal Regulations NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turn
3. e MONO gt MONO SEL Fader gt Not Assigned NOTE Any unused faders and associated switches meters and encoders are unlit and have no function NOTE Patching can be set or changed from the INPUT or OUTPUT menu as appropriate Soundcraft Si Compact Quick Start Guide 0311 13 MIXING TO MAIN L R BUSES To create a simple mix to the Main L amp R outputs 1 2 oF 4 Connect your inputs to the Mic Line inputs on the console Connect the P to Analogue Outputs 15 amp 16 Connect headphones to the socket under the armrest Adjust the gain to achieve a good level on each channel as a guide the 12dB indicator should be on most of the time with only the most occasional flickering of the OdB led To control any individual channel bring it to the ACS by pressing the SEL key and to hear it in your headphones press the associated SOLO key and turn up the monitor volume control Raise the master fader to OdB Raise the channel faders and balance your mix To control the processing of the main mix press the SELect key above the main L R fader to assign the ACS to the main L R bus a You may now open the GEQ for the main L R bus by pressing either the GEQ HI or LO key close the GEQ by pressing the lit HI LO key again NOTE This assumes you are starting from a factory default state To reset the console completely see Factory Reset MIXING TO AUX BUSES To create a simple mix to Pre Fade Aux 1 m
4. LR the SELect keys will light on any channels where this function is ON and whilst in this mode the SELect keys may be used to toggle the function CLR CLR clear works logically with most audio keys to reset groups of parameters such as GEQ Mute Groups EQ Compressors amp similar use CLR BUS n to reset contributions from all channels or buses to BUS n POWER OFF The Si Compact incorporates a safety feature to prevent the power accidently being turned off To shut down the console Press amp hold the POWER ON key for 2 seconds the power light will flash orange 2 To confirm the shut down press the POWER ON key again whilst the light is flashing If the confirmation is not received within 5 seconds the POWER ON key will cancel the power off request and revert to solid green Soundcraft Si Compact Quick Start Guide 0311 SOFTWARE UPDATES The Si Compact software is updated via the USB port on em the front panel Details and special instructions for any BE release will be included with the software release package however the normal procedure is listed below for reference 1 Unzip the files to a USB key in the root directory you should have two files Compact bin info xml 2 Switch the console off using the PWR ON OFF button 3 Press and hold SYSTEM ON OFF button for approx 5 seconds a SOFTWARE UPDATE screen shall appear 4 Insert your USB stick and then press t
5. and associated T controls gt gt SS L amp R MONO SEL Mute Masters and Faders Bank controls Main Channel or Bus Master faders meters and associated controls Phones socket under faders Si Compact Rear Panel Si Compact 24 fader shown Recallable Mic Line Inputs x24 32 16 on other size consoles 16x Analogue r MIC s MIC MIC T Soundcraft Word Clock and MIDI In amp OUT pestGNED AND ENGINEERED IN THE UK BY SOUNDCRAFT 4x Analogue Inserts _ dd not 16 fader version HiQNet Ethernet Port Soundcraft Si Compact Quick Start Guide 0311 9 10 tOTEM THE ONE TOUCH EASY MIX KEYS These keys place the console into MIX mode allowing quick amp easy mixing from Channels to Buses Channels to FX or Buses to Matrix Pressing any key triggers a sequence of events that re configure the control surface and console monitoring system to the optimum layout for the desired required function Aux Buses 1 14 Clears all current SOLOs Sets fader bank to IN A if not currently on IN A or IN B bank Puts input faders into sends on faders mode lighting fader glow according to the PRE or POST setting of the bus Places BUS MASTER for selected bus on the MONO fader SOLOs the selected bus Selects the ACS to the appropriate Aux bus FX Buses 1 4
6. 1 2 Connect a monitor to Analogue Outputs 1 BUS 1 BUS 2 Press the BUS1 follow key notice the input faders have changed colour amp position as they are now your sends from the input channels TO Aux Bus 1 Also note the SEL key over the MONO SEL fader is lit and the fader glow has changed colour to Yellow this is now Bus 1 Master fader Raise the MONO SEL fader to 0dB Raise the channel faders and balance your mix note that the Si Compact has already SOLOd the bus for you enabling you to hear it without the need to press any other keys To control the processing of the Aux Mix use the controls on the ACS a You may now open the GEQ for BUS 1 by pressing either the GEQ HI or LO key close the GEQ by pressing the lit HI LO key again NOTE By default buses 11 14 are set POST fade for more typical application as a sub group this can be changed in the OUTPUTS menu NOTE Assumes you have first created a main L R mix as described 14 Soundcraft Si Compact Quick Start Guide 0311 MIXING TO FX BUSES To create a simple mix to FX Processor 3 O O NOTE This function may only be enabled if an FX processor is patched to a Stereo Return channel this is achieved from the PATCH function in the inputs window FX 3 FX 4 1 Press the FX3 follow key notice the input faders have changed colour amp position as they are now your sends from the input channels TO FX Processor 3 whilst the ON keys are now
7. UT PATCHING amp LAYERS Mic In 1 14 gt Channels 1 14 gt Fader Layer IN A faders 1 14 e Mic In 15 16 gt Channels 15 16 gt Fader Layer IN B faders 1 2 Ste IN Returns 1 2 gt Channels 17 20 gt Fader Layer IN B faders 3 4 Ste FX Returns 3 4 gt Channels 21 24 gt Fader Layer IN B faders 5 6 Si COMPACT 24 FADER INPUT PATCHING amp LAYERS e Mic In 1 22 gt Channels 1 22 gt Fader Layer IN A faders 1 22 Mic In 23 24 gt Channels 23 24 gt Fader Layer IN B faders 1 2 Ste IN 1 2 gt Channels 25 28 gt Fader Layer IN B faders 3 4 Ste FX Returns 3 4 gt Channels 29 32 gt Fader Layer IN B faders 5 6 Si COMPACT 32 FADER INPUT PATCHING amp LAYERS e Mic In 1 30 gt Channels 1 30 gt Fader Layer IN A faders 1 30 Mic In 31 32 gt Channels 31 32 gt Fader Layer IN B faders 1 2 Ste IN 1 2 gt Channels 33 36 gt Fader Layer IN B faders 3 4 Ste FX Returns 1 2 gt Channels 37 40 gt Fader Layer IN B faders 5 6 1 Channels are set up as a Linked Pair Soundcraft Si Compact Quick Start Guide 0311 Si COMPACT OUTPUT PATCHING amp LAYERS s all Si Compact models offer the same level of output processing and number of physical output all models have the same Output Layers amp Patching system Buses 1 14 gt Fader Layer BUS faders 1 14 gt Analogue Line Out 1 14 e MIX 1 4 gt Fader Layer MIX faders 1 4 gt Not Assigned e Main L amp R gt Master L amp R Fader gt Analogue Line Out 15 16
8. defeat the safety purpose of a polarised or grounding type plug A polarised plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NOTE It is recommended that all maintenance and service on the product should be carried out by Soundcraft or its authorised agents Soundcraft cannot accept any liability whatsoever for any loss or damage caused by service maintenance o
9. ectrical power air conditioning or humidity control The benefit of this Warranty may not be assigned by the End User End Users who are consumers should note their rights under this Warranty are in addition to and do not affect any other rights to which they may be entitled against the seller of the Equipment Soundcraft Si Compact Quick Start Guide 0311 PRODUCTS UNDER WARRANTY UK customers should contact their local dealer Customers outside the UK are requested to contact their territorial distributor who is able to offer support in the local time zone and language Please see the distributor listings on our website www soundcraft com to locate your local distributor OUT OF WARRANTY PRODUCTS For out of warranty consoles purchased in the United Kingdom please contact the Customer Services Department e mail soundcraft csd harman com at the factory in Potters Bar Hertfordshire Telephone 44 0 1707 665000 For all other out of warranty consoles please contact the appropriate territorial distributor When mailing or faxing please remember to give as much information as possible This should include your name address and a daytime telephone number Should you experience any difficulty please contact Customer Services Department e mail soundcraft csd harman com Soundcraft Si Compact Quick Start Guide 0311 19 Soundcraft by HARMAN Soundcraft Harman International Industries Ltd Cranborne House Cranborne Road P
10. er half of the GEQ GEQ HI The upper half of the GEQ HOLD TO BYPASS FADER GLOW The Fader Glow system illuminates the fader slot when the function of the fader is anything other than a mono input channel level control according to the following list White Yellow Green Orange Red Cyan Magenta Channel faders linked Faders in BUS mode bus type is PRE FADE or faders in FOLLOW mode to a PRE FADE aux bus Faders in BUS mode bus type is POST FADE or faders in FOLLOW mode to a POST FADE aux bus Faders in matrix master OR faders in FOLLOW mode to a MATRIX bus Faders in GEQ mode A channel assigned as an FX Return or faders in FX follow mode Channel Faders assigned to Stereo channels Soundcraft Si Compact Quick Start Guide 0311 11 PATCHING AND FADER LAYERS The fader layers on Si Compact are arranged in a simple and logical form by default the fader layers are as follows e INA all MONO channels 16ch 1 14 24ch 1 22 32ch 1 30 e IN B all STEREO channels 16ch 15 24 24ch 23 32 32ch 31 40 BUS all Aux Buses 1 14 e MIX all Matrix Buses 1 4 The Fader Glow system indicates the type of channel bus or function is associated with any given fader on the surface The patching system on Si Compact is very flexible and allows almost any physical input to be patched to any logical channel the default patches on the Si Compact are as follows Si COMPACT 16 FADER INP
11. he MENU button 5 Select the INFO XML file using the adjust encoder the LOAD button at the bottom right of the touch screen window will appear when a valid selection is made 6 Press the LOAD button Software will begin loading 7 Wait until both progress bars have reached 100 and the tick symbol has appeared to the right of each progress bar before removing the USB stick It is advised to perform a Factory Reset as described below RESET TO FACTORY DEFAULT The following procedure will restore the console back to the factory defaults NOTE All settings cues and shows will be lost 1 Starting with the console off hold the POWER key for 5 seconds until the console starts Press the LR MONO and FX1 keys together this opens the update page Press the CLEAR SD CARD button on the touch screen P K Restart the console Soundcraft Si Compact Quick Start Guide 0311 17 WARRANTY 18 Soundcraft is a trading division of Harman International Industries Ltd End User means the person who first puts the equipment into regular operation Dealer means the person other than Soundcraft if any from whom the End User purchased the Equipment provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor Equipment means the equipment supplied with this manual lf within the period of twelve months from the date of delivery of the Equipment to the End User it shall prove defec
12. ing the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help For further details contact Harman International Industries Ltd Cranborne House Cranborne Road Potters Bar Hertfordshire EN6 3JN UK Telephone 44 0 1707 665000 Fax 44 0 1707 660742 email soundcraft harman com Harman International Industries Ltd 2011 All rights reserved Parts of the design of this product may be protected by worldwide patents Part No BD10 522004 Issue 0311 Soundcraft is a trading division of Harman International Industries Ltd Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor Soundcraft shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual No part of this manual may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic electrical mechanical optical chemical including photocopying and recording for any purpose without the express written permission of Soundcraft Harman International Industries Limited C
13. mp running in just a few minutes it is written with the assumption that the console is starting from factory defaults For full details on how to use all the features of your product please download the full user guide and any supplements from the Si Compact pages of the web site www soundcraft com NOTE The packaging in which your console arrived forms part of the product and must be retained for future use Soundcraft Si Compact Quick Start Guide 0311 7 Si COMPACT KEY FEATURES e The SI COMPACT series includes many unique technological and operational qualities which include e MIC amps from the renowned Vi series e Soundcraft parametric EQ on all inputs and outputs Fader Glow illumination on all faders BSS Graphic EQ on all bus and matrix outputs e Independent Centre Mono bus e Quad Lexicon FX processors tOTEM The One Touch Easy Mix system that instantly sets the console surface as you need it to create mixes quickly and easily e Lamp Outputs e Dedicated Stereo Line Inputs e Native AES inputs amp outputs e 64x64 channel option card slot fully compatible with existing Si series consoles and cards e HiQNet compatibility e Ultra hard wearing polycarbonate covered control surface resists wear amp tear e Four Insert Send Return loops 24 amp 32 fader versions e No layering of controls on the channel all the controls are available all of the time e Colour touch screen interface e Mute G
14. o avoid invalidation of the warranty all text marked with these symbols should be read carefully WARNINGS The lightning flash with arrowhead symbol is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons CAUTIONS The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance NOTES Contain important information and useful tips on the operation of your equipment HEADPHONES SAFETY WARNING Contain important information and useful tips on headphone A outputs and monitoring levels Soundcraft Si Compact Quick Start Guide 0311 INTRODUCTION Thank you for purchasing this Soundcraft Si Compact mixer The Si Compact series is an incredibly versatile but simple to use digital console optimized for live sound environments or other situations where fast and clear access to any control or parameter is needed Along with many new technologies and features the Si Compact borrows much from its larger predecessors the Soundcraft Si1 Si2 amp Si3 consoles and Soundcraft Vi series ensuring high reliability fantastic audio quality and a mature amp comprehensive feature set This Quick Start Guide is intended to get you going and have a mix up a
15. otters Bar Herts EN6 3JN United Kingdom 44 0 1707 665000 www soundcraft com
16. r repair by unauthorised personnel WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Do not expose the apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus No naked flame sources such as lighted candles should be placed on the apparatus Soundcraft Si Compact Quick Start Guide 0311 Ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc THIS APPARATUS MUST BE EARTHED Under no circumstances should the safety earth be disconnected from the mains lead The mains supply disconnect device is the mains plug It must remain accessible so as to be readily operable when the apparatus is in use If any part of the mains cord set is damaged the complete cord set should be replaced The following information is for reference only The wires in the mains lead are coloured in accordance with the following code Earth Ground Green and Yellow US Green Yellow Neutral Blue US White Live Hot Brown US Black As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol D The wire which is coloured Blue must be connec
17. ranborne House Cranborne Road POTTERS BAR Hertfordshire EN6 3JN UK Tel 44 0 1707 665000 Fax 44 0 1707 660742 http www soundcraft com Soundcraft Si Compact Quick Start Guide 0311 Contents IMPORTANT SAFETY INSTRUCTIONS SAFETY SYMBOL GUIDE INTRODUCTION Si COMPACT KEY FEATURES Si Compact Control Surface and Connector Overview Si Compact Front Panel Si Compact Rear Panel tOTEM THE ONE TOUCH EASY MIX KEYS FADER LAYER KEYS FADER GLOW PATCHING amp FADER LAYERS Si Compact 16 Fader Input Patching amp Layers Si Compact 24 Fader Input Patching amp Layers Si Compact 32 Fader Input Patching amp Layers Si Compact Output Patching amp Layers MIXING TO MAIN L R BUSES MIXING TO AUX BUSES MIXING TO FX BUSES MIXING TO MATRIX BUSES QUICK HINTS amp TIPS POWER OFF SOFTWARE UPDATES RESET TO FACTORY DEFAULT WARRANTY Soundcraft Si Compact Quick Start Guide 0311 CO ICO ICO QO I O S 11 11 12 12 12 12 13 14 14 15 15 16 16 17 17 18 IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s Instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not
18. roups ADVICE FOR THOSE WHO PUSH THE BOUNDARIES Although your new console will not output any sound until you feed it signals it has the Capability to produce sounds which when monitored through an amplifier or headphones can damage hearing over time Please take care when working with your audio if you are manipulating controls which you don t understand which we all do when we are learning make sure your monitors are turned down Remember that your ears are the most important tool of your trade look after them and they will look after you Most importantly don t be afraid to experiment to find out how each parameter affects the sound this will extend your creativity and help you to get the best from your mixer and the most respect from your artists and audience Soundcraft Si Compact Quick Start Guide 0311 Si Compact Control Surface and Connector Overview Si Compact Front Panel Si Compact 24 fader shown Meters Monitors USB amp Power Assignable Channel Strip ACS Soundcraft 2 gp ATTACK Sic LPF m 3 m 6 lt lt D 2 Colour LCD 1 Touch Screen Lexicon FX 1 Controller Buss Follow Global Mode switches and encoders SETUP 600 EOC I DOG Cue Control N i III Vales R Master Faders ma 15 Bea
19. ted to the terminal in the plug which is marked with the letter N The wire which is coloured Brown must be connected to the terminal in the plug which is marked with the letter L Ensure that these colour codes are followed carefully in the event of the plug being changed This unit is capable of operating over a range of mains voltages as marked on the rear panel NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense This Class A digital apparatus meets the requirements of the Canadian Interference Causing Equipment Regulations Cet appareil num rique de la Classe A respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada Soundcraft Si Compact Quick Start Guide 0311 5 FOR YOUR OWN SAFETY AND TO AVOID INVALIDATION OF THE WARRANTY PLEASE READ THIS SECTION CAREFULLY SAFETY SYMBOL GUIDE For your own safety and t
20. the Matrix use the controls on the ACS a You may now open the GEQ for Matrix 1 by pressing either the GEQ HI or LO key close the GEQ by pressing the lit HI LO key again NOTE Use ALT MTX to have MONO and LR faders send to the selected matrix NOTE Assumes you have created a main L R mix and Aux Mix as described Soundcraft Si Compact Quick Start Guide 0311 15 16 QUICK HINTS AND TIPS Full details of all functions are provided in the user guide if needed but the following bullets cover some other common functions Snapshots Press the STORE key to create a snapshot the CUE LIST key opens the list of snapshots and you can select the next cue to recall and amongst other things edit the cue name Home Page Pressing the MENU key will return the touch screen to the home page Mute Groups ssigned using the SETUP key combined with the 1 4 keys and SELect keys on the channels and buses Lexicon Pres the LEX key to open the window to allow changing the FX type and using the SCROLL ADJUST encoder and parameters with the four encoders below the screen INPUTS Amongst other functions this screen allows the name of the channel and the input patching to be changed OUTPUTS Amongst other functions this screen allows the name of the bus and the output patching to be changed SOLO Press and hold a SOLO key to have an auto cancelling momentary solo Interrogate Press and hold a function key like EQ or
21. the routing ON OFF from the channel to the FX bus Also note the SEL key over the MONO SEL fader is lit and the fader glow has changed colour to Cyan as it operates as the FX Return Channel fader whilst in follow mode 2 Raise the channel faders and balance your mix Note that the Si Compact has already SOLO d the FX Return for you enabling you to hear it without the need to press any other keys 3 To control the processing of the FX Return use the controls on the ACS 4 Raise the Mono SEL fader to bring the FX Return into the main mix NOTE Assumes you have created a main L R mix and Aux Mix as described MIXING TO MATRIX BUSES To create a simple mix to Matrix Bus 1 1 Press the MTX1 follow key notice the faders have changed to BUS mode and have changed colour as they are now your sends from the buses to Matrix Bus 1 whilst the ON keys are now the routing ON OFF from the buses to the Matrix Also note the SEL key over the MONO SEL fader is lit and the fader glow has changed colour to orange as this is now the MTX1 Master fader 2 Raise MONO SEL fader 1 to OdB and fader 1 Aux 1 to send Aux 1 to the Matrix Note that the Si Compact has already SOLOd Matrix 1 for you enabling you to hear it without the need to press any other keys To add contribution from the LR and MONO buses to a matrix mix press ALT MIX1 the LR and MONO faders now operate as contribution from these buses to the matrix 3 To control the processing of
22. tive by reason only of faulty materials and or workmanship to such an extent that the effectiveness and or usability thereof is materially affected the Equipment or the defective component should be returned to the Dealer or to Soundcraft and subject to the following conditions the Dealer or Soundcraft will repair or replace the defective components Any components replaced will become the property of Soundcraft Any Equipment or component returned will be at the risk of the End User whilst in transit both to and from the Dealer or Soundcraft and postage must be prepaid This warranty shall only be valid if a the Equipment has been properly installed in accordance with instructions contained in Soundcraft s manual and b the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing and c no persons other than authorised representatives of Soundcraft or the Dealer have effected any replacement of parts maintenance adjustments or repairs to the Equipment and d the End User has used the Equipment only for such purposes as Soundcraft recommends with only such operating supplies as meet Soundcraft s specifications and otherwise in all respects in accordance with Soundcraft s recommendations Defects arising as a result of the following are not covered by this Warranty faulty or negligent handling chemical or electro chemical or electrical influences accidental damage Acts of God neglect deficiency in el
Download Pdf Manuals
Related Search