LCD Projection TV - Beamer
Contents
1. S 29 Auto Tuning Analogue mode only 30 Programme Sorting Analogue mode only 30 Programme Labels Analogue mode only 31 dI 31 Manual Programme Preset Analogue mode only 31 Digital Set Up DN 34 Using Optional Equipment Connecting optional equipment 37 Additional Information Optimum Viewing area sses 40 Replacing the lamp 41 Specifications ssssssessss 44 Troubleshooting ssssssneesreeerrrnnsrerrnn 46 Index 48 Safety information Mains lead Unplug the mains lead when moving the TV set Do not move the TV set with the mains lead plugged in It may damage the mains lead and result in fire or electric shock If you damage the mains lead it may p result in fire or electric shock Do not pinch bend or twist the z e mains lead excessively The core 24 v conductors may be exposed or broken causing a short circuit which may cause fire or electric shock Do not modify or damage the mains lead Do not put anything heavy on the mains lead Do not pull the mains lead Keep the mains lead away from heat sources Besureto grasp the plug when disconnecting the mains lead Ifthe mains lead is damaged stop using it and ask your dealer or Sony service centre to exchange it Use only an original Sony main2. f to select one of the following then press OK On the sound is output from the TV speakers One Time Off the TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment Tip The TV speakers option automatically returns to On when the TV set is switched off Permanent Off the TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment Tip To turn on the TV speakers again change to on PC Adjustment Customizes the TV screen as a PC monitor 1 2 Press OK to select PC Adjustment Press f to select one of the following then press OK Phase Adjust the screen when a part of a displayed text or image is not clear Pitch Enlarges or shrinkes the screen size horizontally H Center Moves the screen to the left or to the right V Center Moves the screen up or down Power saving Turns to standby mode if no PC signal is received Reset Resets to the factory settings Tip This option is only available if you are in PC Mode 27 GB nuo ay Buism Timer menu You can select the options listed below on the Timer Sleep Timer Off menu To select options see Navigating through Clock Set 20 8 2005 Fri 21 30 menus page 19 Timer Ro G NS d JT BSE Select gg Set OK Back End vu Sleep Timer Sets a period of time after whic
3. M Digital auto tune display DV3 Number of Services found EZ 4 Analogue auto tune display Programmes found 5 o_o Searching The TV starts searching for all available digital channels followed by all available analogue channels This may take some time please be patient and do not press any buttons on the TV or remote Once all available digital and analogue channels have been stored the TV returns to normal operation displaying the digital channel stored on channel number 1 If no digital channels are found the analogue channel stored on channel is displayed When a message appears for you to confirm the aerial connections No digital or analogue channels are found Check all the aerial connections and press OK twice to start auto tuning again 2 The Programme Sorting menu appears on the screen Note If some digital channel is found this step will not appear 3 To change the order in which the channels are stored on the TV See page 30 4 Press MENU to exit The TV has now tuned in all the available channels Tip DV3 functions are available only for MG countries page 2 13 o papes Guay Watching TV Watching TV 1 Press bonthe TV Front side to switch on the TV When the TV is in standby mode the amp standby indicator on the front of the TV is red press TV VD on the remote to switch on the TV 14 ce 2 Press DIGITAL to
4. B for sound channel 2 or Mono for a mono channel if available Tip If you select other equipment connected to the TV set Dual Sound to Stereo A or B Keeps a constant volume level even when volume level gaps occur e g adverts tend to be louder than programmes 1 Press OK to select Auto Volume 2 Press V ft to select On then press OK Tip If you set Sound Effect to Dolby Virtual Auto Volume will automatically be switched to Off Screen menu Screen You can select the options listed below on the Screen Auto Format On lw Control menu To select options see Navigating Screen Format Smart through menus page 19 RGB Center D N amp Select gg Set OK Back End vu Auto Format Screen Format RGB Center Automatically changes the screen format according to the broadcast signal 1 Press OK to select Auto Format 2 Press to select On then press OK Tips Even if you have selected On or Off in Auto Format you can always modify the format of the screen by pressing IR repeatedly Auto Format is available for PAL and SECAM signals only For details about the screen format see 15 1 Press OK to select Screen Format 2 Press W to select Wide Smart 4 3 14 9 or Zoom see 15 for details then press OK Adjusts the ho
5. Coaxial cable supplied j 2 I i Cat 27 ET SmartLink Coaxial cable Y Pricepaice US D I ng RF lead supplied 6 60400 nope T not supplied Scart lead not supplied a 11 e papers Guay 1 Connect your aerial to the A socket on the 1 rear of the TV If connecting to an aerial only ZN 2 Connect the 1 socket to the If socket on the rear of the TV with the supplied coaxial cable Connect the TV to your mains socket 220 240V AC 50Hz Press D on the TV front side When you switch on the TV for the first time the Language menu appears on the screen then go to 6 Go to step e i Selecting the language and country region on If connecting to a VCR with an aerial EJ page 12 Go to step 2 When the TV is in standby mode the D pn id indicator on the front of the TV is red press TV U on the remote to switch on the TV then go to page 13 6 Selecting the language and country region When you switch on the TV for the first time the Language menu appears on the screen 2 Connect your VCR Connect the socket on the rear of the TV to the input socket on your VCR with the RF lead 2 Connect the output socket on your VCR to the I socket on the rear of the TV with the supplied coaxial cable Connect the scart socket on your VCR to the 2 scart socket on the rear of the TV with a sc
6. satellite receiver If the digital satellite receiver has a DVI socket and not an HDMI socket connect the DVI socket to the HDMI IN 6 socket and connect the audio socket to the audio sockets HDMI IN 6 The digital video and analogue audio signals are input from the digital satellite receiver CAM Conditional Remove the dummy card from the Access Module CAM slot and insert the CAM For encripted PPV Insert the viewing card into the Pay per View CAM services Notes Switch off the TV before inserting the CAM Keep always the dummy card into the CAM slot when you remove the CAM Modem connector For future use only Hi Fi audio equipment Connect to the audio output sockets J to listen to the sound from the TV on Hi Fi audio equipment To turn off the sound of the TV speakers set Speaker to Off page 26 Continued 39 GB juauidinb3 jeuondo Duren Additional Information Optimum Viewing Area For the best picture quality try to position the TV set so that you can view the screen from within the areas shown below Horizontal viewing area Vertical viewing area K MM 40 Replacing the lamp When the lamp becomes dark or the picture colour is not normal or the lamp indicator Zi on the TV set flashes replace with a new lamp Tips Only use the lamp XL 2400 for replacement If you use another lamp it may cause damage to the TV set Do not remove the lamp except w
7. Avoid installing your VCR in front of the TV or beside the TV Some tiny black points and or The picture of a display unit is composed of pixels Tiny black points and or bright points on the screen bright points pixels on the screen do not indicate a malfunction 46 o Problem Cause Remedy No colour on programmes Select Reset in the Picture Adjustment menu to return to the factory settings page 22 No colour or irregular colour when viewing a signal from the Y PB CB PR CR jacks of e Check the connection of the Y Ps Cs Pr Cr jacks of 433 Make sure that the Y Ps Cs Pr Cr jacks of 3 are firmly seated in their respective sockets Sound Problem Cause Remedy No sound but good picture e Press A or IX Mute Check that TV Speakers is set to on in the Features menu page 26 Noisy sound See the Picture noise causes remedies on page 46 Channels Problem Cause Remedy The desired channel cannot be selected Switch between digital and analogue mode and select the desired digital analogue channel Some channels are blank Scrambled Subscription only channel Subscribe to the Pay Per View service Channel is used only for data no picture or sound Contact the broadcaster for transmission details Digital channel is not displayed Check that the aerial is plugged directly into the TV not through other equi
8. a vehicle The motion of the vehicle may cause the TV set to fall down and cause injury Do not hang this TV set from the ceiling Ships and other vessels Do not install this TV set on a ship or other vessel If the TV set is exposed to seawater it may cause fire or damage the TV set Outdoor use Do not expose the TV set to direct sunlight The TV set may heat up and this may result in damage to the TV set Do not install this TV set outdoors Wiring Unplug the mains lead when wiring cables When hooking up be sure to unplug the mains lead for your safety Take care not to catch your feet on the cables It may damage the TV set Cleaning Unplug the mains lead when cleaning the mains plug and this TV set If you do not it may result in electric shock Clean the mains plug regularly If the plug is covered with dust and it picks up moisture its insulation may deteriorate and result in fire Lightning storms For your own safety do not touch any part of the TV set mains lead or aerial lead during lightning storms Continued 5 GB Damage requiring service If the surface of the TV set cracks do not touch it until you have unplugged the mains lead Otherwise electric shock may result Servicing Do not open the cabinet Entrust the Spa TV setto qualified service personnel J only Si Small accessories removal and fittable Keep accessories out of children s reach If they are sw
9. and screen mode n Text mode page 15 Reveals hidden information e g answers to a quiz eoooo oe Coloured buttons Indigital mode page 16 18 Selects the options at the bottom of the screen in the Favourite and EPG digital menus In Text mode page 15 Used for Fastext QD Text page 15 D EPG Digital Electronic Programme Guide page 16 73 4 4 lt gt 0K page 19 Picture Freeze page 15 Freezes the TV picture D Favourite page 18 DZ QD This button is not supported on this set Sleep Timer page 28 Sets the TV to stadby mode after a specified time period amp MENU page 19 amp PROG page 14 n TV mode Selects the next or previous channel In Text mode Selects the next or previous page amp _1 Volume Tips The ptem PROG and number 5 buttons have tactile dots Use the tactile dots as references when operating the TV DV3 functions are available only for DV countries page 2 8 cB Overview of the TV buttons and indicators Q MENU page 19 OK Input select page 15 In TV mode Selects the input source from equipment connected to the TV sockets In TV menu OK a g Increases or decreases the volume In TV menu Moves through the options left or right gt PROG 4 4 In TV mode Selects the n
10. move it pack it using the original carton and packing material Carrying the TV set requires two people Ventilation Never cover the ventilation holes in the rear side It may cause overheating and result in fire Unless proper ventilation is provided the TV set may gather dust and get dirty For proper ventilation observe the following Donot install the TV set turned backwards or sideways Do not install the TV set turned over or upside down Do not install the TV set on a shelf or in a closet Do not place the TV set on a rug or bed Do not cover the TV set with cloth such as curtains or items such as newspapers etc Leave some space around the TV set Otherwise air circulation may be inadequate and cause overheating which may cause fire or damage to the TV set 10 cm Leave atleast this much space When installing the TV set on the wall leave at least 10 cm space from the bottom of the TV set Never install the TV set as follows Air circulation is blocked ZL N Nall KS Ventilation holes Do not insert anything in the ventilation holes If metal or liquid is inserted in these holes it may result in fire or electric shock Placement Never place the TV set in hot humid or excessively dusty places Do not install the TV set where insects may enter Do not install the TV set where it may be exposed t
11. plugging in unplugging the connecting cords Rough handling may cause the TV to fall damaging the TV the TV stand and the floor 435 uoneunoju jEuorppy Additional Information Specifications Display Unit Power Requirements 220 240 V AC 50 Hz Screen Size KDF ESOA11E 50 inches KDF E42A11E 42 inches Display Resolution horizontal x vertical 1280 dots x 720 lines Power Consumption 175 W Standby Power Consumption 0 8 W Dimensions w x h x d KDF E50AL1E Approx 825 x 1180 x 395 mm KDF E42AL1E Approx 720 x 1000 x 350 mm Weight KDF ESOA11E Approx 29 6 kg KDF E42A11E Approx 25 1 kg Panel System LCD Liquid Crystal Display Panel TV System Analogue Depending on your country region selection B G H D K L I Digital DVB T Colour Video System Analogue PAL SECAM NTSC 3 58 4 43 only Video In Digital MPEG 2 MP ML Aerial 75 ohm external terminal for VHF UHF Channel Coverage Analogue VHF E2 E12 UHF E21 E69 CATV S1 S20 HYPER S21 S41 D K R1 R12 R21 R69 L F2 F10 B Q F21 F69 I UHF B21 B69 Digital VHF UHF 44 ca Terminals AVI S 2I 21 pin Scart connector CENELEC standard including audio video input RGB input and TV audio video output AV2 CS 12 32 SMARTLINK 21 pin Scart connector CENELEC standard including audio video input RGB input selectable audio video output and SmartLink interface AV3 2 33 Y 1 Vp p 75 ohms 0 3V negative sync Ps
12. press OK If you input a wrong character Press Eisleck to select E E and press OK repeatedly until the wrong character is selected Then press 4 4 4 gt to select the correct character and press OK 4 Repeat the procedure in step 3 until the name is complete 5 Press 4 4 lt gt to select End then press OK AV Preset Do the following options 1 Press OK to select AV Preset 2 Press 4 to select the desired input source then press OK 3 Press OK Then press 4 4 to select the desired option below then press OK Option Description Label Assigns a name to any equipment connected to the side and rear sockets The name will be displayed briefly on the screen when the equipment is selected Press to select one of the following then press OK AVI or AV2 AV3 AVA PC HDMI VIDEO DVD CABLE GAME CAM SAT Uses one of these preset labels Edit Creates your own label Follow steps 3 through 5 of Programme Labels page 31 Skip Skips an input source that is not connected to any equipment when you press E to select the input source After selecting this option press OK Sound Offset Sets an independent volume level to each equipment connected to the TV Press gt to select Sound Offset then press OK Press t4 to select the desired volume level Manual Programme Preset Analogue mode only Before selecting Label AFT Audio Filter Ski
13. switch to digital mode DV3 or ANALOG to switch to analogue mode The channels available vary depending on the mode 3 Press the number buttons or PROG to select a TV channel To select channel numbers 10 and above using the number buttons enter the second and third digits within two seconds To select a digital channel using the Digital Electronic Programme Guide EPG see page 16 In digital mode DV3 An information banner appears briefly The following icons may be indicated on the banner fa Radio service ZS Scrambled Subscription service Multiple audio languages available fx Subtitles available J Subtitles available for the hearing impaired Recommended minimum age for current programme from 4 to 18 years H Parental Lock GJ Current programme is being recorded Additional operations To Do this Turn off the TV Press TV VO temporarily Standby mode Press 0X Press 2a to set the volume level Turn on the TV from Standby mode without sound Turn off the TV Press D on the front side of the completely TV Adjust the volume Press 2a increase decrease Mute the sound Press 0X Press again to restore Switch to digital Press DIGITAL DO mode Hide interactive prompts from the screen in digital mode only Switch to analogue Press ANALOG mode Tip DV functions are available only for DM3 countries page 2 To Do this Retur
14. wide screen 16 9 broadcasts in the correct proportions Displays conventional 4 3 broadcasts with an imitation wide screen effect The 4 3 picture is stretched to fill the screen 4 3 Displays conventional 4 3 broadcasts e g non wide screen TV in the correct proportions As a result black border areas are visible on the screen 14 9 Displays 14 9 broadcasts in the correct proportions As a result black border areas are visible on the screen Zoom Displays cinemascopic letter box format broadcasts in the correct proportions Parts of the top and bottom of the picture may be cut off Tips Alternatively you can set Auto Format to On If the broadcaster sends format information the TV will automatically select the best mode to suit the broadcast page 25 Youcan adjust the position of the picture when selecting Smart 14 9 or Zoom Press Vt to move up or down e g to read subtitles 15 o AL Gurysyem Checking the Digital Electronic Programme Guide EPG D3 i this Morning Judge Judy judge 3 Judge I This is BB en Big B From Th News at 024 price drop tv 029 UKTV FOOD 030 CBBC Channel 040 BBC NEWS 24 Select Action list I3 1 day oniott EB Digital Electronic Programme Guide EPG 1n digital mode press amp to display the Digital Electronic
15. 0 7 Vp p 75 ohms Pr 0 7 Vp p 75 ohms 3 Audio input phono jacks 500 mVrms Impedance 47 kilo ohms AV4 S 9 4S video input 4 pin mini DIN amp 4 Video input phono jack amp 4 Audio input phono jacks AVS 5 PC Input 15 Dsub see page 36 G 0 7 Vp p 75 ohms non Sync on Green B 0 7 Vp p 75 ohms non Sync on Green R 0 7 Vp p 75 ohms non Sync on Green HD 1 5 Vp p VD 1 5 Vp p PC audio input minijack G Audio output Left Right phono jacks AV6 6 HDMI Video 480i 576i 480p 576p 720p 1080i Audio Two channel linear PCM 32 44 1 and 48 kHz 16 20 and 24 bits AUDIO 500 mVrms 10096 modulation Impedance 47 kilohms Q Headphones jack 3 CAM Conditional Access Module slot MODEM Modem jack Not supported on this TV Sound Output 10 W 10 W RMS Supplied Accessories Remote RM EDO002 1 Size AA batteries R6 type 2 Coaxial cable 1 Optional Accessories TV stand SU RGI1S KDF E42A11E e TV stand SU RG11M KDF E50A11E Lamp XL 2400 Design and specifications are subject to change without notice PC Input Specifications PC Input Timing Input signal frequency Horizontal 31 4 48 4 KHz Vertical 59 61 Hz Maximum Resolution 1024 dots x 768 lines Preset mode timing table for PC N Resolution Graphic mode Horizontal Vertical dots x lines frequency frequency kHz Hz 1 640 x 480 VESA 60 31 469 59 940 2 800 x 600 VESA 60 37
16. 29 GB nual ay BuisQ Auto Tuning Analogue mode only Tunes in all the available analogue channels Usually you do not need to do this operation because the channels are already tuned when the TV was first installed page 13 However this option allows you to repeat the process e g to retune the TV after moving house or to search for a new channels that have been launched by broadcasters 1 Press OK to select Auto Tuning 2 Follow step 1 of Auto tuning the TV page 13 When all available analogue channels have been tuned the TV returns to normal operation Programme Sorting Analogue mode only 30 GB Changes the order in which the analogue channels are stored on the TV 1 Press OK to select Programme Sorting 2 Press 4 4 to select the channel you want to move to a new position then press OK 3 Press 4 4 to select the new position for your channel then press OK Repeat the procedure in steps 2 and 3 to move other channels if required Programme Labels Analogue mode only Assigns a channel name of your choice up to five letters or numbers The name will be displayed briefly on the screen when the channel is selected Names for channels are usually taken automatically from Text if available 1 Press OK to select Programme Labels 2 Press 4 4 to select the channel you want to name then press OK 3 Press 4 amp to select the desired letter or number CT for a blank space then
17. 6 Channel 32 Channels auto tuning 12 13 selecting 14 Skip 33 Checking the accessories 10 Checking the accessories Accesories supplied 10 Clock Set 28 Colour 21 Colour Tone 21 Coloured buttons 8 Connecting an aerial VCR 11 optional equipment 37 Contrast 21 Country 29 D Decoder 33 Digital Auto Tuning 34 DIGITAL button 8 Digital Manual Tuning 35 48 Digital Set Up 34 Digital Set up 35 Digital Text H button 8 Digital Tuning 34 Dolby Virtual 23 Dual Sound 24 E Effect sound effect 23 EPG Digital Electronic Programme Guide 16 F Fastext 15 Favourite list 18 Features menu 26 H Headphones connecting 37 Hue 21 l Info GB button 8 Input select amp button 8 9 Input signal index table 19 Iris 22 L Label 32 Lamp replacing 41 Language 29 M Manual Programme Preset 31 Manual Timer REC 17 MENU button 8 Mute 0X button 8 N Noise Reduction 22 Number buttons 8 0 OK button 8 9 P Parental Lock 35 PC Adjustment 27 Picture Adjustment menu 21 Picture Mode 21 Picture mode OK button 8 PIN Code 36 Power I indicator 9 PROG buttons 8 9 Programme 32 Programme index table 15 Programme Labels 31 Programme List Edit 34 Programme Sorting 30 R Reminder 17 Remote overview 8 sensor 9 Reset picture adjustment 22 sound adjustment 23 RGB Center 25 S Screen Control menu 25 Screen Format 25 Screen menu 25 Screen mode 15 Screen mode 48 button
18. 8 Selecting the language and country region 12 Set Up menu 28 Sharpness 21 Skip 33 Sleep Timer 28 Smart 15 Sound Adjustment menu 23 Sound Effect 23 Sound effect OU button 8 Specifications 44 Standby indicator 9 Subtitle Language 35 Subtitle Setting 35 System 32 T Technical Set up 36 Text hold amp button 8 Text reveal 2 button 8 Timer list 17 Timer menu 28 Timer REC 16 Treble 23 TV Speakers 26 TV standby VC button 8 V VCR connecting 11 recording 16 Volume 22 buttons 8 9 W Wide 15 Z Zoom 15 WARNUNG Zur Vermeidung eines Stromschlags darf der Netzstecker nicht in eine Steckdose gesteckt werden wenn er vom Netzkabel getrennt wurde Der Stecker ist nicht wiederverwendbar und muss entsorgt werden Zur Vermeidung von Feuer und Stromschlaggefahr darf das Fernsehger t nicht dem Regen oder sonstiger Feuchtigkeit ausgesetzt werden Im Geh use befinden sich Bauteile die unter Hochspannung stehen ffnen Sie das Geh use nicht berlassen Sie Wartungs und Reparaturarbeiten stets qualifiziertem Fachpersonal ACHTUNG Alle mit Digitalfernsehen zusammenh ngenden Funktionen sind nur f r DVB L nder erh ltlich Funktionen mit M3 sind nicht erh ltlich ausser in DVB L ndern DVB L nder Grossbritannien Frankreich Italien Deutschland Spanien Finnland und Schweden ab September 05 2DE Einf hrung Vielen Dank dass Sie sich f r ein Produkt von
19. 879 60 317 3 1024 x 768 VESA 60 48 363 60 004 This TV does not support Sync on Green or Composite Sync Ifa signal other than in the above chart is input it may not be displayed properly or may not be displayed as you set Using the Vertical frequency Hz of the personal computer at 60 is recommended 45 uoneunoju eUOIHPPY Troubleshooting Check whether the D standby indicator is flashing in red When it is flashing The self diagnosis function is activated 1 Measure how long the D standby indicator flashes and stops flashing For example the indicator flashes for two seconds stops flashing for one second and flashes for two seconds 2 Press D on the TV Front side to switch it off disconnect the mains lead and inform your dealer or Sony service centre of how the indicator flashes duration and interval When it is not flashing 1 Checkthe items in the tables below 2 If the problem still persists have your TV serviced by qualified service personnel Picture Problem Cause Remedy No picture screen is dark and Check the aerial connection no sound Connect the TV to the mains and press D on the TV front side e If the D standby indicator lights up in red press TV IK No picture or no menu e Check that the optional equipment is on and press ZS J amp repeatedly until information from equipment the correct input symbol is displayed on the screen connected to the scart Ch
20. DVB countries page 2 34 Option Description Digital Manual Tuning Tunes the digital channels manually 1 Pressthe number button to select the channel number you want to manually tune then press it to tune the channel 2 When the available channels are found press amp f to select the channel you want to store then press OK To display the previous or next five channels Press the red button previous or the green button next 3 Press Lt to select the programme number where you want to store the new channel then press OK Repeat the procedure above to tune other channels manually Digital Set up Subtitle Setting Displays digital subtitles on the screen Press Lt to select Off Basic or For Hard of Hearing then press OK When For hard of hearing is selected some visual aids may also be displayed with the subtitles if TV channels broadcast such information Subtitle Language Selects which language subtitles are displayed in Press rt to select the language then press OK Audio Language Selects the language used for a programme Some digital channels may broadcast several audio languages for a programme Press rt to select the audio language then press OK Audio Type Increases the sound level only for Hard of Hearing Press vt to select Basic or For Hard of Hearing then press OK Parental Lock Sets an age restriction for program
21. Dynamic Intensifies clarity and sound presence for better intelligibility and musical realism by using the BBE High definition Sound System Dolby Virtual Uses the TV speakers to simulate the surround effect produced by a multi channel system Off Flat response Tips e You can change sound effect by pressing 5 repeatedly If you set Auto Volume to On Soud Effect changes to Natural I Licensed by BBE Sound Inc under USP4638258 4482866 BBE and BBE symbol are trademarks of BBE Sound Inc 2 Manufactured under license from Dolby Laboratories Dolby and the double D symbol DO are trademarks of Dolby Laboratories Treble Bass Balance Adjusts higher pitched sounds Treble adjusts lower pitched sounds Bass and emphasizes left or right speaker balance Balance 1 Press OK to select the option 2 Press gt to set the level then press OK Reset Resets the Treble Bass and Balance settings to the factory settings 1 Press OK to select Reset 2 Press V ft to select OK then press OK Continued 23 GB nua ayy BuisQ Dual Sound Auto Volume 24 Selects the sound from the speaker for a stereo or bilingual broadcast 1 Press OK to select Dual Sound 2 Press to select one of the following then press OK Stereo Mono For a stereo broadcast A B Mono For a bilingual broadcast select A for sound channel 1
22. Programme Guide EPG 2 Perform the desired operation in following table To Do this Turn off the EPG Press Move through the EPG Press ptem Display the previous or next six channels Press the red previous or green next button Watch a current programme Press OK while the current programme is selected Sort the programme information by category Category list 1 2 Press the blue button Press f 4 gt to select a category The category name is displayed on the side The categories available include Favourite Contains all the channels that have been stored in the Favourite list page 18 All categories Contains all available channels News Contains all news channels Press OK The Digital Electronic Programme Guide EPG now only displays the current programmes from the category selected Set a programme to be recorded Timer REC c Press f 4 gt to select the future programme you want to record Press OK Press Lt to select Timer REC Press OK to set the TV and your VCR timers A XJ symbol appears by that programme s information Notes You can set VCR timer recording on the TV only for Smartlink compatible VCRs If your VCR is not Smartlink compatible a message will be displayed to remind you to set your VCR timer Once a recording has begun you can switch the TV to standby mode but do not switch off the TV completely or the recording ma
23. Sony entschieden haben Bitte lesen Sie dieses Handbuch aufmerksam durch bevor Sie das Fernsehger t verwenden und bewahren Sie es auf um sp ter bei Bedarf darin nachschlagen zu k nnen Information zu Warenzeichen e DV3 ist ein eingetragenes Warenzeichen des DVB Projekts PlayStation ist ein Warenzeichen von Sony Computer Entertainment Inc Lizenziert durch BBE Sound Inc unter USP4638258 4482866 BBE und das BBE Symbol sind Warenzeichen von BBE Sound Inc Herstellung in Lizenz der Dolby Laboratories Dolby und das Doppel D Symbol DO sind Warenzeichen der Dolby Laboratories IH LJ ITI I Dieses Fernsehger t nutzt High Definition Multimedia Interface HDMI Technologie HDMI das HDMI Logo und High Definition Multimedia Interface sind Marken oder eingetragene Warenzeichen von HDMI Licensing LLC
24. al channels Usually you do not need to do this operation because the channels are already tuned when the TV was first installed page 13 However this option allows you to repeat the process e g to retune the TV after moving house or to search for new channels that have been launched by broadcasters 1 2 Press OK to start digital auto tuning When all available digital channels have been tuned a message stating that the auto tuning process is finished appears Press ges Programme List Edit Removes any unwanted digital channels stored on the TV and changes the order of the digital channels stored on the TV 1 Press Lt to select the channel you want to remove or move to a new position If you know the channel number frequency Press the number buttons to enter the three digit programme number of the broadcast you want To display the previous or next five channels Press the red button previous or the green button next Remove or change the order of the digital channels as follows To remove the digital channel Press OK A message that confirms whether the selected digital channel is to be deleted appears Press to select Yes then press OK To change the order of the digital channels Press gt then press t to select the new position for the channel and press OK Repeat the procedure in step 2 to move other channels if required 3 Press ges Tip DV3 functions are available only for
25. allowed choking or suffocation may occur Call a doctor immediately When not in use For environmental and safety reasons it is recommended that the TV set is not left if standby when unused Disconnect from the mains However some TV sets may have features which need the TV set to be left in standby to work correctly The instructions in this manual will inform you if this applies Viewing the TV To view the TV comfortably the recommended viewing position is from four to seven times the screen s vertical length away from the TV set View the TV in moderate light as viewing the TV in poor light strains your eyes Watching the screen continuously for long periods of time can also strain your eyes Ifthe angle of the TV set is to be adjusted steady the base of the stand with your hand to prevent the TV set from becoming separated from the stand Be careful not to get your fingers caught between the TV set and the stand Volume adjustment Adjust the volume so as not to trouble your neighbours Sound carries very easily at night time Therefore closing the windows or using headphones is suggested When using headphones adjust the volume so as to avoid excessive levels as hearing damage may result Overloading This TV set is designed to operate on a 220 240 V AC supply only Take care not to connect too many appliances to the same mains socket as this could result in fire or electric shock Heat Do not to
26. art lead Note Do not connect the mains lead to your mains socket until all connections are complete 3 Bundle the cable E Kaal 4 Preventing the TV from toppling over Sony strongly recommends using the TV stand SU RGIIS for KDF E42A11E SU RGI 1M for KDF ESOA11E with a support belt designed for your TV 1 Press Vti to Select Language select the language Ser displayed on the Nederlands esky menu screens then inis vaoa anano YCCKNN press OK Deutsch Bbnrapckn T rk e Suomi EAAnvik Dansk Espafiol Svenska Portugu s Norsk 2 Press amp f to select the country region in which you will operate the TV _ 12 c then press OK If the country region in which you want to use the TV does not appear in the list select instead of a country region The message confirming the TV start auto tuning appears on the Screen Select Country United Kingdom Ireland Nederland Belgi Belgique Luxembourg France Italia Schweiz Suisse Svizzera Deutschland Osterreich T Auto tuning the TV After selecting the language and country region a message confirming the TV start auto tuning appears on the screen You must tune the TV to receive channels TV broadcasts Do the following to search and store all available channels 1 Press OK to select Yes Do you want to start automatic tuning Yes No
27. eck the connection between the optional equipment and the TV connector Distorted picture When installing optional equipment leave some space between the optional equipment and the TV When changing programmes or selecting Text turn off any equipment connected to the scart connector on the rear of the TV Double images or ghosting Check aerial cable connections Check the aerial location and direction Only snow and noise appear Check if the aerial is broken or bent on the screen Check if the aerial has reached the end of its serviceable life three to five years in normal use one to two years at the seaside Picture dotted lines or stripes Keep the TV away from electrical noise sources such as cars motorcycles noise or hair dryers Make sure that the aerial is connected using the supplied coaxial cable Keep the aerial cable away from other connecting cables Do not use a 300 ohm twin lead cable as interference may occur Picture noise when viewing a Select Manual Programme Preset in the Set Up menu and adjust AFT TV channel Automatic Fine Tuning to obtain better picture reception page 32 Select Noise Reduction in the Picture Adjustment menu to reduce the noise in the picture page 22 Stripe noise during playback Video head interference Keep your VCR away from the TV recording of a VCR Leave a space of 30 cm between your VCR and the TV to avoid noise
28. een or press OK to access the Input signal index table Press gt to select an input source press then press OK S N 282 232 Audio video or RGB input signal through the scart socket gt amp 1 or 2 appears only if an RGB source has been connected 33 Component input signal through the Y PB CB PR CR sockets 3 and audio input signal through the L G S I R D D D sockets 3 amp S 34 Video input signal through the video socket ZS 4 and audio input signal through the audio socket L G S I MONO R D D D sockets amp 4 S appears only if the equipment is connected to the S video socket S 4 instead of the video socket 4 and S video input signal is input through the S video socket S 34 75 RGB input signal through the PC connectors 5 and audio input signal through the socket 5 6 Digital audio video signal is input through the HDMI IN 6 socket Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket Additional operations To Do this Return to the normal Press DIGITAL or ANALOG TV operation Press OK Press 9 to select an input source press t then press OK Access the Input signal index table Using the Menu Navigating through menus ie x e OOOO 0 2 3 4 Press MENU to display the menu Press to select a menu icon press Pre
29. ext or previous channel In TV menu Moves through the options up R or down n Sleep Timer page 28 Lights up in amber when the Sleep Timer is set or when a digital event is programmed Lights up in amber when digital REC starts Q Lamp Indicator Lights up in red when the lamp for the light source has burned out page 39 1 Power indicator Standby indicator Lights up in green when the TV is switched on Lights up in red when the TV is in standby mode Remote control sensor Power Switches the TV on or off 9 cB 1 Checking the accessories Remote RM ED002 1 Size AA batteries R6 type 2 Coaxial cable 1 10 c 2 Inserting batteries into the remote Notes Observe the correct polarity when inserting batteries Dispose of batteries in an environmentally friendly way Certain regions may regulate disposal of the battery Please consult your local authority Do not use different types of batteries together or mix old and new batteries Handle the remote with care Do not drop or step on it or spill liquid of any kind onto it Donot place the remote in a location near a heat source or in a place subject to direct sunlight or in a damp room 3 Connecting an aerial VCR Rear of the TV Coaxial cable 1 not supplied ar oA T Tr 8 Rear of the TV Coaxial cable SH supplied 2
30. fter the power is turned off to allow it to cool 3 Take the new lamp out of the box Do not touch the glass portion of the new lamp Tips Do not shake the lamp Vibration can damage the lamp or shorten its life Avoid touching the front glass of a new lamp or the glass of the lamp receptacle This may reduce picture quality or lamp life 4 Remove the outside lamp cover PF Br D Remove the lamp door Turn the knob counterclockwise to OPEN and pull out the cover Ai zs uoneunoju jE uorppy 6 Pull out the lamp Hook a finger through the loop of the lamp handle and pull the handle upwards Then pull the lamp straight out Tips The lamp is very hot immediately after use Never touch the glass portion of the lamp or the surrounding parts After the used lamp has cooled place it into the empty box of the replacement lamp Never put the used lamp into a plastic bag 7 Putthe new lamp into its place Mount the new lamp securely Failure to do so may cause a fire or the screen to go dark Tip If the lamp is not securely reattached the self diagnostic function may be triggered and the POWER STANDBY indicator flashes three times see page 9 8 Reattach the lamp door Turn the knob back to CLOSE and secure the cover 42 e 9 Put the outside lamp cover back in its place Tips Consult your Sony dealer for a Sony XL 2400 replacement lamp Take great care when replacing the lamp or
31. h the TV automatically switches itself into the standby mode 1 Press OK to select Sleep Timer 2 Press Wt to select the desired time period 30min 60min 90min 120min then press OK The indicator on the TV front lights up in amber Tips If you switch off the TV and switch it on again Sleep Timer is reset to Off Sleep timer will end soon Power will be turned off appears on the screen one minute before the TV switches to the standby mode If you press 5 2 the remaining time in minutes before the TV switches to the standby mode is displayed on the screen Clock Set 1 Press OK to select Clock set 2 Press to select the day then press gt 3 Setthe month year and hour in the same way as in step 2 4 Press to select the minute then press OK gt The clock starts Timer Sets a predefined period of time after which the TV automatically switches on off 1 Press OK to select Timer 2 Press to select Set then press OK amp 3 Press gt to select the desired period One Day Daily Mon Fri or Weekly then press OK 4 Press V f to select On Time or Off Time then press OK D Press to active Press gt then press 4 lt gt to set time you wish to switch on off the TV Press OK to confirm 28 GB You can select the options listed below on the Set Up Set Up 6 Auto Start Up Language oO Country Auto Tun
32. hen press OK A display appears to confirm that you want to cancel the programme 4 Press e to select Yes then press OK to confirm 17 c AL Gurysyem Using the Favourite list 73 Favourite list 1n digital mode press to display the Favourite list A message appears asking if you want to add channels to the Favourite list when the Favourite list is blank 2 Perform the desired operation in following table To Do this Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list when you press Q2 for the first time 1 2 Press OK to select Yes Press Lt to select the channel you want to add then press OK If there are more than five channels in the list press the green button for the next five channels or press the red button for the previous five channels If you know the channel number you can use the number buttons to directly select a channel Press OK Channels that are stored in the Favourite list are indicated by a Q8 symbol Turn off the Favourite list Press Q Move through in the Favourite list Press Lt Display the previous or next five channels Press the red previous or green next button See brief details on current programmes Press while selecting a channel Press again to cancel Watch a channel Press OK while selecting a channel Add or remove channels in the Favourite 1 list P
33. hen replacing it Before replacing the lamp turn off the power and disconnect the power cord Replace the lamp only after it becomes cool The front glass of the lamp remains at least 100 C 212 F even after the power has been turned off for 30 minutes Do not place the old lamp in proximity to children or flammable material Do not get the old lamp wet or insert objects inside the lamp It may cause the lamp to explode Do not place the old lamp near easily flammable objects as this may cause fire Also do not put your hand inside the lamp compartment as you may be burned Attach the new lamp securely If it is not securely attached the picture may become dark Do not touch or stain the front glass of the new lamp or the glass of the lamp compartment If the glass become dirty the picture quality may deteriorate or the lamp life may shorten Attach the lamp cover firmly If it is not firmly attached the power will not turn on When the lamp burns out a noise is audible This does not indicate damage to the TV set Consult your nearest Sony service center to obtain a new lamp Always remember to dispose of used lamps in an evironmentally friendly way 1 Turn off the power and disconnect the power cord If you start changing the lamp without disconnecting the power cord the standby indicator Vi on the TV set flashes Disconnect the power cord to continue changing the lamp 2 Replace the lamp 30 minutes or more a
34. http www sony net KDF E50A11E KDF E42A11E Printed in Spain 265753811 2 657 538 11 1 ANOS SH V2r3 404 311v053 403 A UONOSIOlg AI 2 657 538 11 1 LCD Projection TV Digital Video Broadcasting KDF E50A11E KDF E42A11E BRAVIA 2005 Sony Corporation Operating Instructions IN Before operating the TV please read the Safety information section of this manual Retain this manual for future reference Bedienungsanleitung DE IN Lesen Sie vor der Inbetriebnahme des Fernsehgerats bitte den Abschnitt Sicherheitsinformationen in dieser Anleitung Bewahren Sie die Anleitung zum sp teren Nachschlagen auf Mode d emploi Z Avant d utiliser le t l viseur lisez attentivement la section Consignes de s curit de ce manuel Conservez ce manuel pour toute r f rence ult rieure Manual de instrucciones ES Antes de utilizar el televisor lea la secci n Informaci n de seguridad de este manual Conserve este manual para consultarlo en el futuro gm For useful information about Sony products Fur hilfreiche Informationen zu Sony Produkten Pour obtenir les informations utiles concernant les produits Sony Informaci n de utilidad para productos Sony http www sony europe com myproduct WARNING To prevent the risk of electric shock do not insert the plug cut off from the mains lead into a socket outlet This plug cannot be used and should be destro
35. igital Tuning Digital Set up Picture Adjustment menu E e You can select the options listed below on the Picture icture Adjustment CO Picture Mode Gian Adjustment menu To select options see Navigating j Contrast Max through menus page 19 OD Brightness D 8 p amp Colour 50 Tip LC Hue 0 e er Jene Sharpness 5 When you set the Picture Mode option to Vivid or IS SE Tone Warm Standard you can adjust only Contrast and Reset ese ET Noise Reduction Auto E Iris High We Select gg Get o Back End vu Picture Mode Selects the picture mode 1 Press OK to select Picture Mode 2 Press to select one of the following picture modes then press OK Vivid For big lighted spaces Standard Optimal picture for home use Custom Allows you to store your own prefered settings Tip You can change the picture mode by pressing ZK repeatedly Contrast Brightness Colour Hue Sharpness 1 Press OK to select the option 2 Press gleck to set the level then press OK Tip Hue can only be adjusted for an NTSC colour signal e g U S A video tapes Brightness Colour Hue and Sharpness only appear and can be adjusted if Picture Mode is set to Custom Colour Tone 1 Press OK to select Colour Tone 2 Press to select one of the following then press OK Co
36. ing E Programme Sorting Programme Labels E AV Preset amp Digital Set Up menu To select options see Navigating through English menus page 19 Manual Programme Preset Select gg Set OK Back End vu Auto Start Up Language Country Starts the first time operation menu to select the language and country region and tune in all available digital and analogue channels Usually you do not need to do this operation because the language and country region will have been selected and channels already tuned when the TV was first installed 13 However this option allows you to repeat the process e g to retune the TV after moving house 1 Press OK to select Auto Start Up 2 Press OK to select Yes The auto tune display appears on the screen 3 Follow steps of 6 Selecting the language and country region page 12 and 7 Auto tuning the TV page 13 Selects the language in which the menus are displayed 1 Press OK to select Language 2 Press 4 4 lt gt to select the language then press OK All menus will appear in the selected language Selects the country region where you operate the TV 1 Press OK to select Country 2 Press 4 4 to select the country region in which you will operate the TV then press OK If the country region in which you want to use the TV does not appear in the list select instead of a country region Continued
37. mes Any programme that exceeds the age restriction can only be watched after a PIN Code is entered correctly 1 Press the number buttons to enter your existing PIN code If you have not previously set a PIN a message appears to inform you Press OK then follow the instruction of PIN code below 2 Press Lt to select the age restriction or None for unrestricted watching then press OK 3 Press ges 35 GB nual ayy Dutsn 36 GB Option Description PIN Code Sets a PIN code for the first time or to change your PIN code 1 Entera PIN as follows If you have previously set a PIN Press the number buttons to enter your existing PIN If you have not set a PIN Press the number buttons to enter the factory setting PIN of 9999 2 Press the number buttons to enter the new PIN code 3 When requested press the number buttons to enter the new PIN again for confirmation A message appears to inform you that the new PIN has been accepted 4 Press s Tip PIN code 9999 is always accepted Technical Set up Displays the Technical Set up menu Do the following options 1 Press to select the desired option then press OK Auto Service Update Enables the TV to detect and store new digital services as they become available Software download Enables the TV to automatically receive software updates free through your existing aerial when issued Sony recommends that this option is set to On a
38. n to the previous channel watched for more than five seconds Le Press 4 Press OK To select a channel press 4t then press OK Access the Programme index table in analogue mode only To access the Input Press OK Press to select signal index table the desired input signal press wt then press OK To access Text Press Each time you press G3 the display changes cyclically as follows Text Text over the TV picture mix mode No Text exit the Text service To select a page press the number buttons or PROG To hold a page press S To reveal hidden information press 5 Return to normal TV mode press ANALOG Tips Ensure that the TV is receiving a good signal or some text errors may occur Most TV channels broadcast a Text service For information on the use of the service select the index page usually page 100 When four coloured items appear at the bottom of the Text page Fastext is available Fastext allows you to access pages quickly and easily Press the corresponding coloured button to access the page Picture Freeze Freezes the TV picture e g to make a note of a telephone number or recipe 1 Press gm on the remote control 2 Press pm again to return to normal TV mode To change the screen mode manually to suit the broadcast Press X repeatedly to select Wide Smart 4 3 14 9 or Zoom Wide Displays
39. nels You can still select a skipped channel using the number buttons 1 Press to select Yes then press OK 2 Press OK to select Confirm then press OK To restore a skipped channel select No in step 1 Decoder Records the scrambled channel selected when using a decoder connected to the scart connector S 32 either directly or via a VCR Note Depending on the country region selected for Country page 29 this option may not be available 1 Press H to select On then press OK 2 Press OK to select Confirm then press OK To cancel this function afterwards select Off in step 1 ATT Attenuates the RF signal In case of a strong RF signal some video interference may be displayed 1 Press Lt to select On then press OK 2 Press OK to select Confirm then press OK Tip This option cannot be used if AV2 Output is set to D TV page 26 Continued 33 GB nua ayy BuisQ Digital Set Up DB Displays the Digital Set Up menu You can change set the digital settings using this menu 1 Press OK to select Digital Set Up 2 Press to select the desired icon below then press OK Digital Tuning Select HIGA OK SAA MENU Digital Tuning menu 3 Press to select one of the following options then press OK Option Description Digital Tuning Digital Auto Tuning Tunes in all the available digit
40. o mechanical vibration Placethe TV set on a stable level surface Otherwise the TV set may fall and cause injury Do not install the TV set in a location where it may protrude such as on a behind a pillar or where you might bump your head on it Otherwise it may result in injury Water and moisture Do not use this TV set near water for example near a bathtub or shower room Also do not expose to rain moisture or smoke This may result in fire or electric shock Donottouch the mains lead and the TV 5 set with set hands Doing so may cause 4 S electric shock or damage to the TV set d Moisture and flammable objects Do not let this TV set get wet Never spill liquid of any kind on the TV set If any liquid or solid object does fall through openings in the cabinet do not operate the TV set It may result in electric shock or damage to the TV set Have it checked immediately by qualified service personnel To prevent fire keep flammable objects candles etc and electric bulbs away from the TV set Oils Do not install this TV set in restaurants that use oil Dust absorbing oil may enter and damage the TV set Fall Place the TV set on a secure stable stand Do CH i not hang anything on the TV set If you do o I the TV set may fall from the stand causing cS damage or serious injury Do not allow children to climb on the TV set Vehicle or ceiling Do not install this TV set in
41. ol Gives the white colours a blue tint Neutral Gives the white colours a neutral tint Warm Gives the white colours a red tint Tip Warm only appears and can be adjusted if Picture Mode is set to Custom Continued 21 e nua ayy BuisQ Reset Reset all the picture settings to the factory settings 1 Press OK to select Reset 2 Press to select OK then press OK Noise Reduction Reduces the picture noise snowy picture in a weak broadcast signal 1 Press OK to select Noise Reduction 2 Press to select Auto then press OK Tip This option cannot be used for an input signal from the Y PB CB PR CR sockets of J 3 Iris Enhances the contrast for dark scenes 1 Press OK to select Iris 2 Press to select High Mid Low or Off then press OK 22 GB Sound Adjustment menu SOE You can select the options listed below on the Sound CZ sound ettect Danie Adjustment menu To select options see Navigating Treble 0 through menus page 19 Bass 0 e Z Balance 0 ost Reset lt Dual Sound A E Auto Volume Off e e LG Select gg Get o Back End vu Sound Effect 1 Press OK to select Sound Effect 2 Press Wt to select one of the following sound effects then press OK Natural Enhances clarity detail and sound presence by using BBE High definition Sound System
42. p Decoder ATT press PROG to select the programme number with the channel You cannot select a programme number that is set to skip page 33 1 Press OK to select Manual Programme Preset 2 Press 4 to select one of the following options then press OK Continued 31 c nual ay Dutsn Option Description Programme System Channel Presets programme channels manually 1 Press to select Programme then press OK 2 Press to select the programme number you want to manually tune if tuning a VCR select channel 0 then press 3 Press to select System then press OK Note Depending on the country region selected for Country page 26 this option may not be available 4 Press f to select one of the following TV broadcast systems then press B G for western European countries regions D K for eastern European countries regions I for the United Kingdom L for France 5 Press to select Channel then press OK 6 Press 4 9 to select S for cable channels or C for terrestrial channels then press gt 7 Tune the channels as follows If you do not know the channel number frequency Press tit to search for the next available channel When a channel has been found the search will stop To continue searching press 4 9 If you know the channel number frequency Press the number buttons to enter the channel number of the broadcast you want or you
43. pment Contact a local installer to find out if digital transmissions are provided in your area Upgrade to a higher gain aerial General Problem Cause Remedy The TV turns off automatically the TV enters standby mode Check if the Timer is activated page 28 e f no signal is received or no operation is performed in the TV mode for 10 minutes the TV automatically switches to standby mode The TV turns on automatically Check if the Timer is activated page 28 Some input sources cannot be selected Select AV Preset in the Set Up menu and cancel Skip of the input source page 31 The remote does not function Replace the batteries The lamp indicator 5j on front of the TV set is lit Turn the TV off Turn the TV on again if the lamp indicator is still lit then replace the internal lamp For details refer to page 39 to 41 Continued 47 uoneunou jE uorppy Index Numerics 0 9 buttons 8 14 9 15 4 3 15 A Accessories supplied 10 Aerial connecting 11 AFT 32 Analogue mode C button 8 ATT 33 Audio Filter 33 Audio Language 35 Audio Type 35 Auto Format 25 Auto Start Up 29 Auto Tuning 12 analogue and digital channels 13 analogue channels only 30 digital channel only 34 Auto Volume 24 AUX VIDEO l 5 button 8 AV Preset 31 AV2 Output 26 B Balance 23 Bass 23 BBE 23 Brightness 21 C CA Module Set up 36 Category list 1
44. ppropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product 7 GB Overview of the remote TV I TV standby Switches off the TV temporarily The D standby indicator on the front of the TV lights up Press again to switch on the TV from the standby mode X Mute page 14 5 Input select Text hold n TV mode page 19 Selects the input source from equipment connected to the TV sockets n Text mode page 15 Holds the current page ANALOG Analogue mode DIGITAL digital mode M3 Switches to digital mode In digital mode removes any interactive prompts from the screen amp Screen mode page 15 This button is not supported on this set 0 Picture mode page 21 Sound effect page 23 Number buttons n TV mode Selects channels For channel numbers 10 and above enter the second digit within two seconds n Text mode Enters the three digit page number to select the page Q C Previous channel Returns to the previous channel watched for more than five seconds D Info Text reveal n digital mode Displays brief details of the programme currently being watched n analogue mode Displays information such as current channel number
45. r VCR channel number 8 Press OK 9 Press OK to select Confirm then press OK Repeat the procedure above to preset other channels manually Label Assigns a name of your choice up to five letters or numbers to the selected channel This name will be displayed briefly on the screen when the channel is selected 1 Follow steps 3 to 5 of Programme Labels page 31 2 Press OK to select Confirm then press OK AFT Fine tunes the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality Normally fine tuning is performed automatically 1 Press to adjust the fine tuning over a range of 15 to 15 then press OK 2 Press OK twice To restore automatic fine tuning select On in step 1 32 GB Option Description Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts Sometimes a non standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes 1 Press f to select Low or High then press OK If you do not experience any sound distortion we recommend that you leave this option set to the factory setting Off 2 Press OK to select Confirm then press OK Note You cannot receive stereo or dual sound when Low or High is selected Skip Skips unused analogue channels when you press PROG to select chan
46. rating the TV set continuously for a long period as the display panel becomes hot Werecommend that the screen surface be touched as little as possible To remove dust from the screen surface cabinet wipe gently with a soft cloth If dust is persistent wipe with a soft cloth slightly moistened with a diluted mild detergent solution You can wash and repeatedly use the soft cloth Never use any type of abrasive pad alkaline acid cleaner scouring powder or volatile solvent such as alcohol benzene thinner or insecticide Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material The ventilation holes can accumulate dust over time To ensure proper ventilation we recommend removing the dust periodically once a month using a vacuum cleaner Disposal of the TV set Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall Me be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by ina
47. ress the blue button Channels that are stored in the Favourite list are indicated by a Q9 symbol Press Lt to select the channel you want to add or remove If there are more than five channels in the list press the green button for the next five channels or press the red button for the previous five channels If you know the channel number you can use the number buttons to directly select a channel Press OK Press the blue button to return to the Favourite list Remove all channels from the Favourite list N sch Bo Press the blue button Press the yellow button A display appears to confirm that you want to delete all channels from the Favourite list Press to select Yes then press OK to confirm Tip DV3 functions are available only for DV3 countries page 2 18 o Viewing pictures from connected equipment Switch on the connected equipment then perform one of the following operation For equipment connected to the scart sockets using a fully wired 21 pin scart lead Start playback on the connected equipment The picture from the connected equipment appears on the screen For an auto tuned VCR page 11 Press PROG or the number buttons to select the video channel You can also press gt repeatedly until the correct input symbol see below appears on the screen For other connected equipment Press amp repeatedly until the correct input symbol see below appears on the scr
48. rizontal picture position so that the picture is in the middle of the screen 1 Press OK to select RGB Center 2 Press gt to adjust the centre of the picture between 5 and 5 then press OK Tip This option is only available if an RGB source has been connected to the Scarts connectors CS 1 21 or gt 2 532 on the rear of the TV 25 GB nual ayy BuisQ Features menu You can select the options listed below on the Features gt AV Output TV Speakers O PC Adjustment 4 I Features menu To select options see Navigating through menus page 19 Select gg Get o Back End vu AV2 Output TV Speakers 26 GB Sets a signal to be output through the socket labelled G 32 on the rear of the TV If you connect a VCR to the C9 32 socket you can then record from the equipment connected to other sockets of the TV 1 2 Press OK to select AV2 Output Press f to select one of the following then press OK D TV Outputs a digital broadcast A TV Outputs an analogue broadcast AVI Outputs signals from equipment connected to the C 1 socket AV4 Outputs signals from equipment connected to the amp 4 S 9 4 socket Auto Outputs whatever is being viewed on the screen Turns off the TV speakers e g to listen to the sound through external audio equipment connected to the TV 1 2 Press OK to select TV Speakers Press
49. s lead not other brands Mains lead cable protection Pull out the mains lead cable by A the plug Do not pull on the mains lead cable itself Mains Do not use a poor fitting mains socket Insert the D p plug fully into the mains socket A poor fit may aa cause arcing and result in fire Contact your electrician to have the mains socket changed Optional accessories Observe the following when installing the TV set using a stand If you do not do so the TV set may fall and cause serious injury D Use the specified stand Secure the TV set properly following the instructions supplied with your stand when installing the TV set Be sure to attach the brackets supplied with your stand Medical institutions Do not place this TV set in a place where medical equipment is in I A use It may cause malfunction of IT E 2 medical instruments 4 8 Carrying Beforecarrying the TV set disconnect all the cables from the TV set When you carry the TV set by hand hold the TV set as illustrated on the right If you do not do so the TV set may fall and be damaged or cause serious injury If the TV set has been dropped or damaged have it checked immediately by qualified service personnel When transporting it do not subject the TV set to jolts or excessive vibration The TV set may fall and be damaged or cause serious injury When you carry the TV set in for repair or when you
50. s mercury Follow your local ordinances and regulations for disposal Installing the TV set Do not install the TV set in places subject to extreme temperature for example in direct sunlight or near a radiator or heating vent If the TV set is exposed to extreme temperature the TV set may overheat and cause deformation of the casing or cause the TV set to malfunction The TV set is not disconnected from the mains when the TV set is switched off To disconnect the TV set completely pull the plug from the mains To obtain a clear picture do not expose the screen to direct illumination or direct sunlight If possible use spot lighting directed down from the ceiling Do not install optional components too close to the TV set Keep optional components at least 30 cm away from the TV set If a VCR is installed in front of the TV set or beside the TV set the picture may become distorted Picture distortion and or noisy sound may occur if the TV set is positioned in close proximity to any equipment emitting electromagnetic radiation Handling and cleaning the screen surface cabinet of the TV set The screen surface is finished with a special coating to prevent strong light reflections To avoid material degradation or screen coating degradation Observe the following precautions Do not push on the screen scratch it with a hard object or throw anything at it The screen may be damaged Do not touch the display panel after ope
51. ss Eisleck to select an option Press Eisleck to change set the setting then press OK To exit the menu press MENU To return to the last display press A OD Continued 19 o nua ayy BuisQ Overview of the menus The following options are available in each menu For details on navigating through menus see page 19 Also see page in parentheses for details of each menu Picture Adjustment oo Picture Mode Contrast D Brightness Colour FEE Sharpness Oo Colour Tone Reset o Noise Reduction e Iris 0 t Custom Max 50 50 0 15 Warm Auto High Select S 9 Set OK End MENU Picture Adjustment Picture Mode 21 Contrast Brightness Colour Hue Sharpness 21 Colour Tone 21 Reset 22 Noise Reduction 22 Iris 22 Sound Adjustment Sound Effect 23 Treble Bass Balance 23 Reset 23 Dual Sound 24 Auto Volume 24 Screen Auto Format 25 Screen Format 25 RGB Center 25 Features AV2 Output 26 TV Speakers 26 PC Adjustment 27 20 GB OQ Timer Sleep Timer 28 Clock Set 28 Timer 28 amp Set Up o Auto Start Up 29 Language 29 Country 29 Auto Tuning 30 Programme Sorting 30 Programme Labels 31 AW Preset 31 Label Skip Manual Programme Preset 31 Programme System Channel Label AFT Audio Filter Skip Decoder ATT Confirm Digital Set Up 34 D
52. t all times If you do not want your software to be updated set this option to Off System Information Displays the current software version and the signal level Instead of step 2 Press 2 Press t to select the On then press OK CA Module Set up This option will allow you to access a Pay Per View service once you obtain a Conditional Access Module CAM and a view card See page 36 for the location of the PCMCIA socket Connecting optional equipment You can connect a wide range of optional equipment to your TV Connecting cables are not supplied Connecting to the side of the TV o H o d 8 To connect Do this Headphones Connect to the Q socket to listen to sound from the TV on headphones S VHS Hi8 DVC camcorder Personal Computer Headphones To connect Do this S VHS Hi 8 DVC Connect to the S video socket camcorder S 34 or the video socket 4 and the audio sockets 4 To avoid picture noise do not connect the camcorder to the video socket amp 4 and the S video socket S 34 at the same time If you connect mono equipment connect to the L G S I sockets amp 54 and set Dual Sound to A page 24 Personal Computer Connect to the PC Input socket amp 35 and the audio socket 9 5 Note It is recommended to use a PC cable with ferrites Continued 37 GB jua
53. tons and ele e TEE 9 Getting Started 1 Checking the accessories 10 2 Inserting batteries into the remote 10 3 Connecting an aerial VCR 11 4 Preventing the TV from toppling over 12 5 Switching on the TN 12 6 Selecting the language and COunfrviregion 12 7 Auto tuning the TV 13 Watching TV LV for digital channels only Watching TV nenne 14 Checking the Digital Electronic Programme Guide EPG DB 16 Using the Favourite list DN 18 Viewing pictures from connected EQUIPMENT une 19 Using the Menu Navigating through menus 19 Overview of the menus 20 Picture Adjustment menu 21 Picture Mode ee 21 Contrast Brightness Colour Hue Sharpness Colour TONE aar een 22 acl Me 22 Noise Reduction sssssesssss 22 22 Sound Adjustment menu 23 Sound Effect AA 23 Treble Bass Balance nennen 23 acl c hanes 23 D al S nd tinet i rte ee 24 Auto VOUM is iir nette 24 Screen men 25 Auto Formate ae ent 25 Screen Format 25 RGB RTE 25 Features menu esee 26 AVZ Oultpul een ae 26 TV Speakers 26 PC Adjustment sees 27 Timer menu EE 28 Sleep Timer iet 28 NOC Seb serotonin 28 E E een 28 Set Up menu 29 Auto Start Up uincere 29 Ee TE 29 COUM
54. uch the surface of the TV set It remains hot even after the TV set has been turned off for some time Corrosion If you use this TV set near the seashore salt may corrode metal parts of the TV set and cause internal damage or fire It may also shorten the life of the TV set Steps should be taken to reduce the humidity and moderate the temperature of the area where the TV set is located 6 GB Precautions LCD Panel Although the LCD panel is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LCD panel This is a structural property of the LCD panel and is not a malfunction Do not expose the LCD panel surface to the sun Doing so may damage the screen surface Do not push or scratch the front filter or place objects on top of this TV set The image may be uneven or the LCD panel may be damaged If this TV set is used in a cold place a smear may occur in the picture or the picture may become dark This does not indicate a failure These phenomena disappear as the temperature rises Ghosting may occur when still pictures are displayed continuously It may disappear after a few moments The screen and cabinet get warm when this TV set is in use This is not a malfunction The LCD contains a small amount of liquid crystal and mercury The fluorescent tube used in this TV set also contain
55. uidinb3 jeuondo Duren Connecting to the rear of the TV PlayStation 2 rm p url gt Loree Digital satellite Decoder receiver DVD E CAM eject button DVD mm ab Li HH KN E 2 60 Cmm ti 32 R L SmartLink L as Or e ee o DVD recorder Hard Y Fafe Pe Ce ES RD 83 disc recorder O o 9 ng 1222 T VCR n E DVD player with component Serge re D d output Seu ecoder Hi Fi 38 GB To connect Do this PlayStation 2 DVD player or decoder ID Connect to the scart socket gt CHL When you connect the decoder the scrambled signal from the TV tuner is output to the decoder then the unscrambled signal is output from the decoder DVD recorder or VCR that supports SmartLink EI Connect to the scart socket gt 2 SmartLink is a direct link between the TV and a VCR DVD recorder For more information on SmartLink refer to the instruction manual supplied with your VCR or DVD recorder DVD player with component output Connect to the component socket 23 and the audio sockets amp 3 The component signal containing 576p signal format and audio signal are input from the DVD player Digital satellite Connect only to the HDMI IN 6 receiver socket The digital video and audio signals are input from the digital
56. y be cancelled Tip DVB functions are available only for DM3 countries page 2 16 c To Do this Set a programme to be displayed 1 Press 4 lt gt to select the future programme you want to automatically on the screen when it starts display Reminder 2 Press OK 3 Press V f to select Reminder 4 Press OK to automatically display the selected programme when the programme starts A symbol appears by that programme s information Note If you switch the TV to standby mode it will automatically turn itself on when the programme is about to start 1 Press OK 2 Press Lt to select Manual Timer REC 3 Press t to select the date then press gt 4 5 Set the time and date of a programme you want to record Manual Timer REC Set the start and stop time in the same way as in step 3 Press Lt to select the channel then press OK to set the TV and your VCR timers A XJ symbol appears by that programme s information Notes Youcan set VCR timer recording on the TV only for Smartlink compatible VCRs If your VCR is not Smartlink compatible a message will be displayed to remind you to set your VCR timer Oncearecording has begun you can switch the TV to standby mode but do not switch off the TV completely or the recording may be cancelled Cancel a recording reminder Timerlist 1 Press OK Press amp 4 to select Timer list 3 Press W f to select the programme you want to cancel t
57. yed To prevent the risk of fire or electric shock do not expose the TV set to rain or moisture Dangerously high voltages are present inside the TV set Do not open the cabinet Refer servicing to qualified personnel only NOTICE Certaines fonctions li es la TV num rique ne sont disponibles que dans les pays diffusion DVB Les fonctions avec DM ne sont pas disponibles sauf pour les pays diffusion DVB e Pays diffusion DVB Royaume Uni France Italie Allemagne Espagne Finlande et Su de septembre 2005 2 GB Introduction Thank you for choosing this Sony product Before operating the TV please read this manual thoroughly and retain it for future reference Trademark information e DV3isaregistered trademark of the DVB project PlayStation is a trademark of Sony Computer Entertainment Inc Licensed by BBE Sound Inc under USP4638258 4482866 BBE and BBE symbol are trademarks of BBE Sound Inc Manufactured under license from Dolby Laboratories Dolby and the double D symbol DQ are trademarks of Dolby Laboratories e This TV incorporates i LJ m High Definition Multimedia Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Table of Contents Safety information nennen 4 Precautions Rc 7 Overview of the remote 8 Overview of the TV but
Download Pdf Manuals
Related Search