Instruction Manual - Sony Asia Pacific
Contents
1. Be sure to unplug the AC power cord connected to the TV set from AC power outlet before cleaning To avoid material degradation or screen coating degradation observe the following precautions To remove dust from the screen surface cabinet wipe gently with a soft cloth If dust is persistent wipe with a soft cloth slightly moistened with a diluted mild detergent solution Do not spray water or detergent directly on the TV set It may drip to the bottom of the screen or exterior parts and may cause a malfunction Never use any type of abrasive pad alkaline acid cleaner scouring powder or volatile solvent such as alcohol benzene thinner or insecticide Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation When adjusting the angle of the TV set move it slowly so as to prevent the TV set from moving or slipping off from its table stand Optional Equipment Keep optional components or any equipment emitting electromagnetic radiation away from the TV set Otherwise picture distortion and or noisy sound may occur Batteries Observe the correct polarity when inserting batteries Do not use different types of batteries together or mix old and new batteries Dispose of batteries in an environmentally friendl2. 2 1 Refer to the following TV installation dimensions table and mark the TV outline on the template 2 Tape the template to the wall as instructed in the manual provided with the Wall Mount Bracket Follow the instruction manual provided with the Wall Mount Bracket to complete the installation H5 through Continued 4 9 GB uomneunojuj EUONIPPY TV installation dimensions table SU WL700 Screen centre point Unit mm Display Screen centre Length for each mounting angle dimensions dimension Angle 0 Angle 20 e 55NX815 55NX810 770 52 363 723 52NX800 787 75 389 46NX710 660 51 325 46NX700 716 75 362 40NX800 635 75 337 40NX710 582 51 299 40NX700 641 75 337 Model Name KDL Figures in the above table may differ slightly depending on the installation The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV Refer to Specifications page 13 for its weight 20 98 SU WH500 Refer to the Instructions supplied with the SU WH500 Wall Hanging Bracket to properly carry out the installation For KDL 60NX 55NX815 KDL 60 55NX810 KDL 46 40NX710 only in M6 x 16 P Pulley a 6 o S Soft cloth f With the screen of the TV facing down attach the SU WH500 accessories It is unnece
3. 40NX710 only Mounting Hook Screw PSW6 16 Screw PSW6 x 16 Soft cloth Soft cloth f Attach the Mounting Hook using four PSW6 x 16 screws supplied with the Wall Mount Bracket 16 98 TV installation dimensions table SU WL500 Screen centre point SU WL50B Screen centre point Unit mm Screen Length for each mounting angle Model Name KDL Display dimensions centre dimension Angle 0 Angle 20 e SU SU WL500 WL50B su SU WL500 SU SU WL500 o 60NX815 60NX810 836 53 482 93 342 785 60NX800 889 31 59 490 121 384 842 55NX815 55NX810 770 86 482 92 318 723 52NX800 787 110 46NX710 660 141 169 482 91 280 46NX700 716 40NX800 635 40NX710 582 178 482 252 40NX700 641 Figures in the above table may differ slightly depending on the installation The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV Refer to Specifications page 13 for its weight Continued 1798 uojeunoju Screw and Hook l
4. TV checking the A mark is facing the front 2 Attach the TV and Table Top Stand with the supplied screw and hexagon wrench Set the torque setting to approximately 3 N m 30 kgf cm Reattaching the Table Top Stand to the TV Attach to the original position using the removed screws See Detaching the Table Top Stand from the TV page 9 Continued 5 GB dn a T For KDL 55NX815 KDL 55NX810 KDL Adjusting the viewing angle of 46 40NX710 the TV except 60 inch models This TV can be adjusted within the angles 0 shown below f To return to 0 reverse the below procedure For KDL 52 40NX800 KDL 46 40NX700 Remove screw as Install screw into shown the top screw hole of the Table Top Stand 3 Lift up and tilt Slide in 668 Connecting an antenna aerial cable VCR Connecting an antenna aerial cable Antenna aerial cable not supplied Connecting an antenna aerial cable and VCR Antenna aerial cable not supplied AV cable not supplied Antenna aerial cable not supplied VIDEO IN VIDEO OUT VCR f When connecting an antenna aerial cable not supplied an adaptor not supplied may be required Australian model and New Zealand model only For KDL 60 52 40NX800 af
5. Wall Hanging 15 Safety Informal sicario 23 iii A ci 24 Operating instructions are built into your BRAVIA TV Refer to To use i Manual for operation page 11 Before operating the TV please read Safety Information page 23 Retain this manual for future reference 3 Checking the accessories For all models Remote 1 Size AAA batteries R3 type 2 Table Top Stand 1 For KDL 60 52 40NX800 KDL 46 40NX700 models AC power cord mains lead 1 Cable holder 1 except KDL 60NX800 Black spacers 4 KDL 60 52 40NX800 only Screws M6 x 20 4 KDL 60NX800 only Stand rear cover 1 Bottom cover 1 KDL 60 52 40NX800 only Fixing screws for Table Top Stand M5 x 16 4 Assembling screws for Table Top Stand M5 x 16 4 KDL 40NX800 and KDL 40NX700 only For KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 models Hexagon wrench 1 Assembling screws for Table Top Stand 4 except KDL 40NX710 Assembling screws for Table Top Stand 2 KDL 40NX710 only 3D Glasses battery included 2 KDL 60 55NX815 only Pouch for 3D Glasses 2 KDL 60 55NX815 only 3D Sync Transmitter 1 KDL 60 55NX815 only Double sided tape 2 KDL 60 55NX815 only l For KDL 60NX800 attached to the TV Disassembled except for KDL 60 52NX800 and KDL 46NX700 Refer to the supplied Table Top Stand leaflet
6. e g in direct sunlight or in sun heated cars When using the simulated 3D function please note that the displayed image is modified from the original due to the conversion done by this television View the TV in moderate light as viewing the TV in poor light or during long period of time strains your eyes When using headphones adjust the volume so as to avoid excessive levels as hearing damage may result LCD Screen Although the LCD screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LCD screen This is a structural property of the LCD screen and is not a malfunction Do not push or scratch the front filter or place objects on top of this TV set The image may be uneven or the LCD screen may be damaged If this TV set is used in a cold place a smear may occur in the picture or the picture may become dark This does not indicate a failure These phenomena disappear as the temperature rises Ghosting may occur when still pictures are displayed continuously It may disappear after a few moments The screen and cabinet get warm when this TV set is in use This is not a malfunction The LCD screen contains a small amount of liquid crystal Follow your local ordinances and regulations for disposal Handling and cleaning the screen surface cabinet of the TV set
7. is unavailable when you select Arabic or Persian Follow the instructions on the screen Programme Sorting Changes the order of analogue channels stored in the TV 1 Press 4 9 to select the channel you want to move to a new position then press 2 Press 4 9 to select the new position for the channel then press You can also tune channels manually Detaching the Table Top Stand from the TV f Remove the screws guided by the arrow marks 4 of the TV Do not remove the Table Top Stand for any reason other than to install corresponding accessories on the TV For KDL 60 52 40NX800 KDL 46 40NX700 For KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 KDL 60NX815 KDL 60NX810 9 GB dn Watching TV To watch programmes ES DIO AMP TV 2773 Q The number 5 B PROG and AUDIO 1 Turn on the TV Q Switch ENERGY SAVING SWITCH on e O Press D on the TV to turn on the TV Select a mode if both digital and analogue signals are available DIGITAL ANALOG Select a TV channel PROG o Using Digital Electronic Programme Guide only available for EPG supported countries regions Press GUIDE in digital mode to display the programme guide buttons on the remote have a tactile dot E Use the tactile dots as a reference when operating the TV To utilise the TV s fe
8. rating To reset the TV to ENERGY RATING qualified settings select Home mode from the initial set up procedure in Factory Settings under the Set up menu IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as Using cabinets or stands recommended by the manufacturer of the television Only using furniture that can safely support the television Ensuring the television is not overhanging the edge of the supporting furniture Not placing the television on tall furniture for example cupboards or bookcases without anchoring both the furniture and the television to a suitable support Not standing the televisions on cloth or other materials placed between the television and supporting furniture Educating children about the dangers of climbing on furniture to reach the television or its controls Notice for customers in the South Africa The Euro South Africa converter plug should be fitted as follows 1 Insert the power supply or CEE7 plug in to the converter plug 2 Use an appropriate screwdriver to attach the screw tightly without damaging the screw head 3 TEST Grip the converter plug and pull the VDE cord set transformer to ensure it is fully secure if not then increase the torque setting an
9. KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 only 3D Sync terminal for optional transmitter Continued 1 3 GB EUONIPPY Approx 152 5 cm Approx 132 2 cm Model name KDL 60NX800 52NX800 46NX700 Power and others Power requirements 10 V 240 V AC 50 60 Hz Screen size measured diagonally 60 inches 52 inches 46 inches Approx 116 8 cm Display resolution 920 dots horizontal x 1 080 lines vertical Dimensions with Table Top Stand 440 mm x 921 mm x 1 261 mm x 819 mm x 1 127 mm x 748 mm x Approx 380 mm 400 mm 320mm wxhxd without Table Top Stand 1 440 mm x 889 mm x 1 261 mm x 787 mm x 1 127 mm x 716 mm x 64 mm 64 mm 64 mm Mass with Table Top Stand 50 6 kg 36 1 kg 27 8 kg without Table Top Stand 43 3 kg 30 1 kg 24 kg Supplied accessories See Checking the accessories page 4 Optional Wall Mount Bracket SU WL500 WL50B SU WL700 WL50B accessories Wall Hanging Bracket SU WH500 TV Stand SU 52NXI SU 46NX1 Model name KDL 40NX800 40NX700 Power and others Power requirements 110 V 240 V AC 50 60 Hz Screen size measured diagonally 40 inches Approx 101 6 cm 40 inches Approx 101 6 cm Display resolution 1 920 dots horizontal x 1 080 lines vertical Approx 152 5 cm Approx 138 8 cm Appr
10. SON Y LCD Digital Colour TV Operating Instructions i MANUAL BRAVIA 4 180 475 16 1 Setting Up Watching TV Additional Information KDL 60NX815 60NX810 60NX800 55NX815 55NX810 52NX800 46NX710 46NX700 KDL 40NX800 40NX710 40NX700 Introduction Thank you for choosing this Sony product Before operating the TV please read this manual thoroughly and retain it for future reference go The illustrations used in this manual are of the KDL 40NX800 unless otherwise state In this manual following models are described as NX800 models KDL 60 52 40NX800 The illustrations of the remote used in this manual are of the RM GDO10 unless otherwise stated Following models are described as NX700 models KDL 40 46NX700 Trademark information is a registered trademark of the DVB Project HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance DivX is a video file compression technology developed by DivX Inc Divx DivX Certified and associated logos are registered trademarks of DivX Inc and are used under license ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified devi
11. asses TDG BR100 TDG BR50 3D Sync Transmitter TMR BR100 TV Stand may not be available depending on your region country Design and specifications are subject to change without notice 1408 Installing the Accessories Wall Mount Wall Hanging Bracket To Customers For product protection and safety reasons Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors Do not attempt to install it yourself To Sony Dealers and Contractors Provide full attention to safety during the installation periodic maintenance and examination of this product Your TV can be installed using the SU WL500 except KDL 52 40NX800 KDL 46 40NX700 SU WLSOB except KDL 60 55NX815 KDL 60 55NX810 or SU WL700 except KDL 60NX815 KDL 60NX810 KDL 60NX800 Wall Mount Bracket SU WH500 Wall Hanging Bracket sold separately Referto the Instructions supplied with the Wall Mount Bracket or Wall Hanging Bracket to properly carry out the installation Referto Detaching the Table Top Stand from the TV in this manual Be sure to remove the joint when the Table Top Stand is not attached to the TV KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 only Sufficient expertise is required for installing this product especially to determine the strength of the wall for withstanding the TV s weight Be sure to entrust the attachment of this product to the wall to Sony dea
12. atures HOME button OPTIONS button Press to display various operation and setting screens 10 98 Press to display convenient functions based on the current input or content To use i Manual Operating instructions are built into your BRAVIA TV and can be displayed on the screen You can browse your i Manual anytime you need to find the varieties of convenient functions THEATRE 1 a ID Ln SYNC MENU Co 1 This feature is unavailable when you select Arabic or i MANUAL NE TOP MENU MEN a m ELO Persian DISTA INTERNET ANALOG CB WIDGETS VIDEO fuese en 1 Press i MANUAL MANUAL 2 Press lt gt 4 09 to select items Welcome to i Manual BRAVIA TV Features Watching TV Using the Home Menu Fun Features with Connected Equipment Parts Description Troubleshooting Index Welcome to i Manual Fun Features with Connected BRAVIA TV Features Equipment _ Introduces how to connect optional equipment Watching TV o Introduces convenient features such as EPG E Parts Description Guide Favourites etc Troubleshooting Using the Home Menu Find solutions for your problem Customise your TV settings etc 5 Index f mages and illustrations may differ from what is displayed on the screen 11 98 AL BuiuojgM Troubleshooting Check whether the 1 stand
13. by indicator is flashing in red When the standby indicator is flashing The self diagnosis function is activated 1 Count how many times the 0 standby indicator flashes between each three second break For example the indicator may flash three times go off for three seconds then flash again three times 2 Press D on the TV to turn it off disconnect the AC power cord mains lead and inform your dealer or Sony service centre of how the indicator flashes number of flashes When the 5 standby indicator is not flashing 1 Check the items in the tables below Also refer to Troubleshooting in the i Manual 2 If the problem persists have your TV serviced by qualified service personnel Condition Explanation Solution Picture There is no picture screen Check the antenna aerial cable connection is dark and no sound Connect the TV to the AC power mains and press D on the TV If the standby indicator lights up in red press TV b Tiny black points and or The screen is composed of pixels Tiny black points and or bright bright points appear on the points pixels on the screen do not indicate a malfunction Screen General The TV s power cannot be Check if ENERGY SAVING SWITCH is on e turned on The TV turns off Check if the Sleep Timer is activated or confirm the automatically the TV Duration setting of On Timer enters standby mode Ch
14. care not to catch your feet on the cables Disconnect the AC power cord from the AC power outlet before working on or moving the TV set Keep the AC power cord away from heat sources Unplug the AC power plug and clean it regularly If the plug is covered with dust and it picks up moisture its insulation may deteriorate which could result in a fire Notes Do not use the supplied AC power cord on any other equipment Do not pinch bend or twist the AC power cord excessively The core conductors may be exposed or broken Do not modify the AC power cord Do not put anything heavy on the AC power cord Do not pull on the AC power cord itself when disconnecting the AC power cord Do not connect too many appliances to the same AC power outlet Do not use a poor fitting AC power outlet Prohibited Usage Do not install use the TV set in locations environments or situations such as those listed below or the TV set may malfunction and cause a fire electrical shock damage and or injuries Location Outdoors in direct sunlight at the seashore on a ship or other vessel inside a vehicle in medical institutions unstable locations near water rain moisture or smoke Environment Places that are hot humid or excessively dusty where insects may enter where it might be exposed to mechanical vibration near flammable objects candles etc The TV set shall not be exposed to drippi
15. ce that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories BRAVIA and BRAVIA are trademarks of Sony Corporation XMB and xross media bar are trademarks of Sony Corporation and Sony Computer Entertainment Inc HOM HIGH DEFINITION MULTIMEDIA INTERFACE I DOLBY DIGITAL C dina 2 GB Notes for Australia and New Zealand model This product is ENERGY RATING qualified in the Home mode ENERGY RATING is a program designed to promote energy efficient products and practices When the TV is initially set up it is designed to meet ENERGY RATING requirements while maintaining optimum picture quality Changes to certain features settings and functionalities of this TV e g TV Guide Picture Sound Eco Setting can slightly change the power consumption Depending upon such changed settings e g Shop mode the power consumption may vary which possibly could exceed the stated energy
16. d further tighten Re test The converter plug is now ready for use Notice for customers in Thailand This telecommunication equipment conforms to NTC technical requirement Complies with IDA Standards DB00353 Notice for customers in India Attach the supplied plug adaptor Location of the identification label Labels for Model No and Power Supply rating in accordance with applicable safety regulation are located on the rear of the TV For KDL NX800 series models they can be found by removing the bottom cover Table of Contents Checking the accessories usce lA a 4 Inserting batteries into the remote non n nn nono rr rn emnes 4 Setting Up Attaching the Table Top rn 5 Connecting an antenna aerial Cable VCR esses nennen nennen 7 Preventing the TV from toppling eene 8 Bundling the cables ee ek 8 Performing the initial Set Up conocia 9 Detaching the Table Top Stand from the TV nne 9 Watching TV TO Watch programmes i rr 10 Lo utilise the TV s features dte e ride ase ER eem ien due 10 To use Manual 5 5 ERR OHIO IEEE BUCO 11 Aaditional Information Troubleshooting e rt taste ie 12 lere uL EIDEM 13 Installing the Accessories Wall Mount
17. eck if the Idle TV Standby is activated The remote does not Replace the batteries function Your TV may be in SYNC mode Press SYNC MENU select TV Control and then select Home Menu or Options to control the TV The Parental Lock password Enter 9999 for the PIN code PIN code 9999 is always accepted has been forgotten The TV surrounds become When the TV is used for an extended period the TV surrounds warm become warm You may feel hot when touching there by the hand 12 98 Specifications System Panel system LCD Liquid Crystal Display Panel TV system Analogue B G I D K M Digital DVB T Colour video system Analogue PAL PAL60 only video input SECAM NTSC3 58 NTSC4 43 only video input MPEG 2 MPOML HL Australian model MPEG 2 MP ML HL H 264 MPEG 4 AVC MP HP L4 New Zealand and Singaporean model Digital Channel coverage Analogue B G VHF E2 E12 UHF E21 E69 CATV S01 S03 51 541 0 12 5A 9A UHF 28 69 CATV S01 S03 S1 S44 Australia and Singapore only VHF 1 11 UHF 21 69 CATV S1 S41 New Zealand and Singapore only I B21 B69 CATV S01 S03 S1 S41 Australia New Zealand and South Africa only D K VHF C1 C12 RI R12 UHF C13 C57 R21 R60 CATV 501 503 51 541 Z1 Z39 Australia New Zealand and South Africa only M A2 to A13 UHF 14 to A79 CATV A 8 to A 2 A to W 4 W 6 to W 84 Sou
18. el When AC power cord is damaged Poor fitting of AC power outlet setis damaged by being dropped hit or having something thrown at it Any liquid or solid object falls through openings in the cabinet 24 08 Precautions Viewing the TV Some people may experience discomfort such as eye strain fatigue or nausea while watching 3D video images or playing stereoscopic 3D games Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games The length and frequency of necessary breaks will vary from person to person You must decide what works best If you experience any discomfort you should stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends consult a doctor if you believe necessary You should also review i the instruction manual of any other device or media used with this television and ii our website http www sony asia com support for the latest information The vision of young children especially those under six years old is still under development Consult your doctor such as a pediatrician or eye doctor before allowing young children to watch 3D video images or play stereoscopic 3D games Adults should supervise young children to ensure they follow the recommendations listed above Donotuse store or leave the 3D Glasses or the battery near fire or in places with a high temperature
19. lations For safety reasons it is strongly recommended that you use Sony accessories including Wall mount bracket SU WLS00 except KDL 52 40NX800 KDL 46 40NX700 SU WLSOB except KDL 60 55NX815 KDL 60 55NX810 SU WL700 except KDL 60NX815 KDL 60NX810 KDL 60NX800 Wall hanging bracket SU WH500 TV Stand SU B550S KDL 55NX815 KDL 55NX810 SU B460S KDL 46NX710 SU B400S KDL 40NX710 SU 52NX1 KDL 52NX800 SU 46NX1 KDL 46NX700 SU 40NX1 KDL 40NX800 40NX700 Be sure to use the screws supplied with the Wall mount bracket when attaching the mounting hooks to the TV set The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook The diameter and length of the screws differ depending on the Wall mount bracket model Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall etc 8 mm 12 mm Screw supplied with the Wall mount bracket Mounting Hook Hook attachment on rear of TV set Transporting Before transporting the TV set disconnect all cables Two or three people are needed to transport a large TV set When transporting the TV set by hand hold it as shown on the right Do not put stress on the LCD panel and the frame around the screen When lifting or moving the TV set hold it firmly from the bottom When transporting the TV se
20. lers or licensed contractors and pay adequate attention to safety during the installation Sony is not liable for any damage or injury caused by mishandling or improper installation Continued 1598 uomneunojuJ EUONIPPY SU WL500 SU WL50B For KDL 60 52 40NX800 KDL 46 40NX700 SU WL500 KDL 60NX800 only SU WL50B Mounting Mounting Hook Hook Spacer KDL 60 52 40NX800 only Screw M6 x 20 Screw M6 x 20 KDL 60NX800 Screw PSW6 x 16 KDL 52 40NX800 KDL 46 40NX700 f When installing the TV on a wall remove the four screws from the rear of the TV They are fastened in the screw holes for wall mounting Be sure to store the removed screws in a safe place keeping them away from children Attach the Mounting Hook For KDL 60NX800 Using the supplied four spacers and four M6 x 20 screws For KDL 52NX800 40NX800 Using the supplied four spacers and the four PSW 6 x 16 screws supplied with SU WL50B For KDL 46 40NX700 Using the four PSW 6 x 16 screws supplied with SU WLSOB Place the TV on the Table Top Stand when securing the Mounting Hook Remove the bottom cover and terminal cover first before detaching the Table Top Stand See step 4 page 19 for details When attaching the Table Top Stand again be sure to fasten the four screws previously removed to the original holes on the rear of the TV For KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 SU WL500 SU WL50B KDL 46
21. manual provided with Wall Mount Bracket 1 Check the parts supplied with the Wall Mount Bracket Refer to the instruction manual provided with the Wall Mount Bracket 2 Decide on the installation location 2 1 Refer to the following TV installation dimensions table Allow for suitable clearance between the TV the ceiling and protruding parts of the wall as instructed 3 Install the Base Bracket on the wall Ee through El Decide the positions of the screw on the wall and install the Base Bracket Refer to the instruction manual provided with the Wall Mount Bracket for details 4 Detach the Table Top Stand from the TV if necessary 1 1 See Detaching the Table Top Stand from the TV in this manual for details 5 Connect the supplied AC power cord mains lead 1 KDL 52 40NX800 KDL 46 40NX700 only Do not attach the bottom cover and terminal cover 6 Piace the Spacers KDL 52 40NX800 only D Remove the four screws and be sure to store them in a safe place keeping them away from children Place the four spacers supplied 2 When attaching the Table Top Stand again be sure to fasten the four screws previously removed to the original holes on the rear of the TV T Attach the Mounting Bracket and the Lock Bracket 4 3 through 1 7 Refer to the instruction manual provided with the Wall Mount Bracket 8 Prepare the paper template
22. ng or splashing and no objects filled with liquids such as vases shall be placed on the TV Situation Do not use when your hands are wet with the cabinet removed or with attachments not recommended by the manufacturer Disconnect the TV set from AC power outlet and antenna during lightning storms Continued 93 GB EUONIPPY Broken pieces Do not throw anything at the TV set The screen glass may break by the impact and cause serious injury f the surface of the TV set cracks do not touch it until you have unplugged the AC power cord Otherwise electric shock may result When not in use If you will not be using the TV set for several days the TV set should be disconnected from the AC power for environmental and safety reasons As the TV set is not disconnected from the AC power when the TV set is just turned off pull the plug from the AC power outlet to disconnect the TV set completely However some TV sets may have features that require the TV set to be left in standby to work correctly For children Do notallow children to climb on the TV set Keep small accessories out of the reach of children so that they are not mistakenly swallowed If the following problems occur Turn off the TV set and unplug the AC power cord immediately if any of the following problems occur Ask your dealer or Sony service centre to have it checked by qualified service personn
23. ocations diagram table Model Name Screw location Hook location KDL SU WL500 SU WL50B SU WL500 SU WL50B 60NX815 60NX810 d g a 60NX800 55NX815 55NX810 52NX800 46NX710 46NX700 40NX800 40NX710 40NX700 SU WL500 Screw location Hook location When installing the Mounting Hook on the TV When installing the TV onto the Base Bracket a b c AS Hook location cannot be used for the models SU WL50B Screw location Hook location When installing the Mounting Hook on the TV When installing the TV onto the Base Bracket d o dio e o e o f o go glo hlo hlo i Base Bracket o 1 Hook location cannot be used ye lye for the models E E SU WL700 except KDL 60NX815 KDL 60NX810 KDL 60NX800 Installing on a wall f Remove the bottom cover and terminal cover when installing on a wall KDL 52 40NX800 only Be sure to use the black spacers supplied with the TV when installing on a wall KDL 52 40NX800 only Precautions Be sure to install the Wall Mount Bracket securely to the wall following the instructions in this as well as the manual provided with the Wall Mount Bracket The numbers given in the parentheses indicate the installation steps described in the instruction
24. ox 116 8 cm Dimensions with Table Top Stand 994 mm x 669 mm x 290 mm 994 mm x 673 mm x 290 mm Approx without Table Top Stand 994 mm x 635 mm x 64 mm 994 mm x 641 mm x 64 mm wxhxd Mass with Table Top Stand 23 8 kg 22 6 kg without Table Top Stand 20 1 kg 19 2 kg Supplied accessories See Checking the accessories page 4 Optional Wall Mount Bracket SU WL700 WL50B accessories Wall Hanging Bracket SU WH500 TV Stand SU 40NX1 Model name KDL 60NX815 55NX815 46NX710 40NX710 60NX810 55NX810 Power and others Power requirements 10 V 240 V AC 50 60 Hz Screen size measured diagonally 60 inches 55 inches 46 inches 40 inches Approx 101 6 cm Display resolution 920 dots horizontal x 1 080 lines vertical Dimensions with Table Top Stand 400 mm x 865 mm 1 276 mm x 800 mm 1 083 mm x 690 mm 944 mm x 612 mm Approx x 303 mm x323 mm x 270 mm x245 mm wxhxd without Table Top Stand 1 400 mm x 836 mm 1 276 mm x 770 mm 1 083 mm x 660 mm 944 mm x 582 mm x 45 mm x 32 mm x31 mm x32mm Mass Approx with Table Top Stand 43 0 kg 322 kg 244 kg 19 8 kg without Table Top Stand 36 6 kg 26 9 kg 20 5 kg 16 1 kg Supplied accessories See Checking the accessories page 4 Optional accessories Wall Mount Bracket SU WL500 SU WL700 WL500 SU WL700 WL500 WL50B Wall Hanging Bracket SU WH500 TV Stand SU B550S SU B460S SU B400S 3D Gl
25. ssary to attach the Cushions supplied with SU WH500 1 in Installation of SU WH500 Instructions Attach the Pulleys to the upper two screw holes see illustration above using M6 x 16 screws supplied with SU WH500 El 5 in Installation of SU WH500 Instructions Continued 94 GB EUONIPPY TV installation dimensions table SU WH500 For KDL 60 52 40NX800 and KDL 46 40NX700 refer to the Instructions supplied with the SU WH500 Wall Hanging Bracket Screen centre point Model Name KDL 60NX815 60NX810 55NX815 55NX810 46NX710 40NX710 2 indicates value which is measured upward from datum point Figures in the above table may differ slightly depending on the installation The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV Refer to Specifications page 13 for its weight 22 Safety Information Installation Set up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire electrical shock or damage and or injuries Installation The TV set should be installed near an easily accessible AC power outlet Place the TV set on a stable level surface to avoid it from falling down and cause personal injury or damage to the TV Only qualified service personnel should carry out wall instal
26. t do not subject it to jolts or excessive vibration When transporting the TV set for repairs or when moving pack it using the original carton and packing material Ventilation Never cover the ventilation holes or insert anything in the cabinet Leave space around the TV set as shown below It is strongly recommended that you use a Sony wall mount bracket in order to provide adequate air circulation Installed on the wall 30 cm Leave at least this space around the set Installed with stand 30 cm j Leave at least this space around the set To ensure proper ventilation and prevent the collection of dirt or dust Do not lay the TV set flat install upside down backwards or sideways not place the TV set on a shelf rug bed or in a closet Do not cover the TV set with a cloth such as curtains or items such as newspapers etc Do not install the TV set as shown below Air circulation is blocked AC power cord Handle the AC power cord and outlet as follows in order to avoid any risk of fire electrical shock or damage and or injuries Use only Sony supplied AC power cords not those of other brands Insert the plug fully into the AC power outlet Operate the TV set on a 110 240 V AC supply only When wiring cables be sure to unplug the AC power cord for your safety and take
27. ter connecting cables install the bottom cover and stand rear cover 7 98 dn Preventing the TV from toppling over 1 Install a wood screw 4 mm in diameter not supplied in the TV stand 2 Install a machine screw not supplied into the screw hole of the TV For KDL 60 52 40NX800 KDL 46 40NX700 Use MA x 16 screw For KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 Use MA x 8 screw 3 Tie the wood screw and the machine screw with a strong cord not supplied Anoptional Sony support belt kit is used to secure the TV Contact your nearest Sony service centre to purchase a kit Have your TV model name ready for reference 8 cB Bundling the cables Do not bundle AC power cord mains lead together with other cables A cable holder is available for KDL 52 40NX800 and KDL 46 40NX700 To bundle the cables follow steps 3 to 5 For KDL 60 52 40NX800 KDL 46 40NX700 For KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 Performing the initial set up KDL 60 55NX815 KDL 60 55NX810 KDL 60 52 KDL 46 40NX710 40NX800 KDL 46 40NX700 1 Connect the TV to your AC power outlet mains socket 2 Check the ENERGY SAVING SWITCH setting is on e 3 Press D on the TV When you switch on the TV for the first time the Language menu appears on the screen i Manual page 11
28. th Africa only Digital VHF UHF Australia and Singapore only UHF New Zealand only Sound output KDL 60 52 40NX800 KDL 46 40NX700 10 W 10W KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 8W 8W 10W Input Output jacks Antenna aerial cable 75 ohm external terminal for VHF UHF 1 Video input phono jack SW 1 2 Audio input phono jacks lt COMPONENT IN 152 Supported formats 1080p 1080i 720p 576p 576i 480p 480i 2 2 Video input phono jack HDMI INI 2 3 4 Video KDL 60 52 40NX800 KDL 46 40NX700 1080 24p 1080p 1080i 720p 576p 576i 480p 480i KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 1080 24p 1080p 1080i 720 24p 720p 576p 576i 480p 480i Audio Two channel linear PCM 32 44 1 and 48 kHz 16 20 and 24 bits Dolby Digital Analogue audio input minijack HDMI IN2 only G DIGITAL AUDIO OUT OPTICAL Digital optical jack Two channel linear PCM Dolby Digital CG VAR FIX Audio output phono jacks J amp PC IN PC Input Mini D sub 15 pin PC audio input minijack y USB port Q Headphones jack zum LAN 10BASE T 100BASE TX connector Depending on the operating environment of the network connection speed may differ IOBASE T 100BASE TX communication rate and communication quality are not guaranteed for this TV For LAN connections use a Category 7 10BASE T 100BASE TX cable not supplied 3D SYNC
29. to assemble the stand 2 For KDL 60NX800 attached to the TV Inserting batteries into the remote 1 Remove the protection sheet 2 Push and slide the cover upward Attaching the Table Top Stand Refer to the supplied Table Top Stand leaflet for proper attachment for some TV models f For best picture quality do not expose the screen to direct illumination or sunlight If the TV is brought directly from a cold to a warm location or is placed in a very damp room or is placed in a room in which heating has just been turned on moisture may condense on the surface or inside the TV Should this occur turn off the TV and leave the TV off until the moisture evaporates and then the TV can be used If you notice moisture condensation between the glass panel and the LCD turn on the TV and the condensation will evaporate after the TV has warmed up For KDL 52 40NX800 KDL 46 40NX700 1 Place the TV set on the Table Top Stand 2 Fix the TV to the Table Top Stand according to the arrow marks 4 that guide the screw holes using the supplied screws 2 f using an electric screwdriver set the tightening torque at approximately 1 5 N m 15 kgf cm 3 After all the screws are tightened attach the supplied stand rear cover to the Table Top Stand Al For KDL 60 55NX815 KDL 60 55NX810 KDL 46 40NX710 1 Align with the two dowels of the Table Top Stand and gently place the
30. y way Certain regions may regulate the disposal of batteries Please consult your local authority Handle the remote with care Do not drop or step on it or spill liquid of any kind onto it Donot place the remote in a location near a heat source a place subject to direct sunlight or a damp room Disposal of the TV set Australian model only Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol is on the remote control Instructions about Installing Wall Mount Bracket are included within this TV s instructions manual Customer Support http www sony asia com support http www sony net O 2010 Sony Corporation Printed in Malaysia 41804751 6 1 4 180 475 16 1
Download Pdf Manuals
Related Search