AIR-SA20PK
Contents
1. 15 S AIR ID selector 17 18 Select the S AIR ID to connect with the sub units 16 PAIRING button 20 Press to perform pairing 17 EZW RT10 slot 17 Insert the supplied wireless transceiver 18 Buttons for controlling an iPod BI play pause 24 Press to start or pause playback Haa P PI 24 Press to skip to the previous next track Hold down to find a point in a track MENU 24 Press to return to the previous menu Works much like the Menu button on the iPod 4 24 Press to select a menu item or track for playback ENTER 24 Press to execute the selected item or play the selected track 19 PARTY CH 23 25 27 Press to select the sound source when the S AIR mode is set to PARTY 20 S AIR MODE 23 Press to select the S AIR mode 21 Battery compartment lid 18 22 PRESET 27 Press to select a preset station 23 DISPLAY 23 27 28 Press to view the information on the display Display frd fur fur fur pur qun ur mus l Uh bij tib Ui Uh Ui Uil AUTO TUNED ST 1 2 1 S 2 3 Text information 4 AIR mode indicator 23 PAIRING indicator 19 Tuner reception mode 25 Tuner reception 25 Continued S s oJ1uo2 pue sued epino 11 Sub unit2. Ia oor Ct viec Urt TFET g 2 cp Preset number 4 Press TUNING SELECT on the unit repeatedly to select your desired preset number If another station is already assigned to the selected preset number the station is replaced by the new stations 5 Press ENTER on the unit 6 Repeat steps 1 through 5 to store other stations You can preset up to 20 FM and 10 AM stations The preset stations are retained for about half a day even if you disconnect the power supply cord or if a power failure occurs To call up a preset radio station using the main unit Press PRESET repeatedly To call up a preset radio station using the sub units 1 Preset radio stations on the main unit see Presetting radio stations page 26 2 Select the tuner channel Press S AIR CH repeatedly until TUNER appears in the display 3 Select FM or AM Press and hold S AIR CH until FM changes to AM or vice versa 4 Press PRESET repeatedly to select a preset station To check the frequency of the station name Press DISPLAY on the remote for the main unit or DISPLAY on the sub unit while the station name is displayed To return the station name indication press DISPLAY while the frequency is displayed The display on both the main unit and sub unit is switched if DISPLAY is pressed on either the main unit or sub unit Using an optional AV system You can enjoy audio and vid
3. Heat buildup on the main unit and the sub units during operation is normal and is not cause for alarm Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot Do not obstruct the ventilation holes The sub units only On the speaker system This speaker system is not magnetically shielded and the picture on nearby TV sets may become magnetically distorted In this situation turn off the TV wait about 15 to 30 minutes and turn it back on If there is no improvement move the unit far away from the TV The sub units only Cleaning the cabinet Clean the cabinet with a soft dry cloth Do not use any type of abrasive pad scouring powder or solvent such as thinner benzine or alcohol s1 4 0 37 389 Specifications Main unit AIR SA15Ti Output AUDIO OUT voltage 775 mV impedance 47 kilohms VIDEO OUT Max output level 1 Vp p unbalanced Sync negative load impedance 75 ohms Composite Video Out Wireless transceiver EZW RT10 EZW RT10A Communication System S AIR Specification version 1 0 Frequency band 2 4000 GHz 2 4835 GHz Modulation method DSSS Power requirements DC 3 3 V 350 mA Dimensions w h d 50 x 13 x 60 mm Mass 24g Tuner section FM stereo FM AM superheterodyne tuner FM tuner section Tuning range 87 5 108 0 MHz 50 kHz step Antenna FM lead antenna Antenna terminals 75
4. 4 Press ENTER on the unit to exit the system menu Setting the clock of the sub units Use buttons on the unit to set the clock 1 Press 1 0 to turn on the unit 2 select the clock set mode Press CLOCK TIMER MENU If the current mode appears on the display press 19 PPI repeatedly to select CLOCK and then press CLOCK TIMER ENTER 3 Set the time Press 1 PI repeatedly to set the hour and then press CLOCK TIMER ENTER Use the same procedure to set the minute Note The clock settings are canceled when you disconnect the power cord or if a power failure Occurs paueis 1 I 21 Operations Selecting the S AIR mode When connecting to multiple sub units you can listen to different sound sources on each sub unit MULTI SOURCE mode or to the same sound source on both sub units PARTY mode by selecting the S AIR mode accordingly Use the main unit to set the S AIR mode Bl MULTI SOURCE mode Sub unit Sub unit ccce mm ma m Z E PARTY mode py Sub unit Sub unit Livi g roo e Main unit and iPod 229 Press S AIR MODE on the remote repeatedly until the desired S AIR Listening to iPod mode indicator lights up
5. AIR SA15R Wireless Speaker System Front panel Rear Panel 12 Remote for the sub unit RM ANU046 LL 1 1 power 18 30 35 Press to turn on or off the sub unit 2 STANDBY indicator 32 Lights up when the sub unit is turned off 3 S AIR CH 24 26 27 Press to select the S AIR channel of the connected main unit 4 B play 24 30 Press to start or pause playback of an iPod connected to the main unit H pause 24 Press to pause or start playback of an iPod connected to the main unit BI CANCEL stop cancel 24 35 Press to pause playback of an iPod connected to the main unit 5 4 P PI 21 24 29 Press to skip to the previous next track of an iPod connected to the main unit Hold down to find a point in a track of an iPod connected to the main unit PRESET 27 Press to select a preset station 6 DISPLAY 28 31 35 Press to display the information of the connected main unit or clock in the display 7 SLEEP 29 Press to set the Sleep Timer Continued S s oJ1uo2 pue syed epino H 13 149 8 CLOCK TIMER MENU 21 29 CLOCK TIMER ENTER 21 29 31 Press to set the clock and the Daily Timer 9 VOLUME 24 29 31 Press to adju
6. When pairing is performed the displays on both the main unit and the sub unit change as follows PAIRING COMPLETE To cancel pairing Change the S AIR IDs of the main unit and the sub unit to different S AIR IDs To stop the pairing operation midway Press the PAIRING button again To pair the main unit with multiple sub units Repeat steps 1 through 4 If the S AIR connection is unstable Since the S AIR product uses radio waves that share the same frequency 2 4 GHz as other wireless systems such as wireless LAN or Bluetooth devices interference or poor transmission may result if you use other wireless systems near the main unit and or the sub units In this case the connection may be improved by changing the RF CHANGE Radio Frequency Change setting on the main unit 1 Press SYSTEM MENU on the unit 2 Press TUNING SELECT on the unit repeatedly until RF CHG appears then press ENTER on the unit Press TUNING SELECT on the unit repeatedly to select the desired setting The default setting is underlined AUTO Normally select this setting The main unit changes the RF CHANGE setting to ON or OFF automatically ON The main unit transmits sound by searching for the best channel for transmission OFF The main unit transmits sound using a fixed channel for transmission When you select this setting select the S AIR ID that provides the best connection
7. can be connected with the main unit Identifying the main unit with a specific sub unit Pairing operation It is easy to set the same S AIR ID for the main unit and the sub units to establish the connection However if a neighbor has an S AIR main unit with the same S AIR ID as your S AIR main unit you may be able to hear the audio transmitted from your neighbor s S AIR main unit on your system To prevent this you can identify the main unit with a specific sub unit by performing the pairing operation Before pairing The connection is established by the S AIR ID example Your system Neighboring system Main unit IDA 504 4 2 M p VY IDA IDA Sub unit Sub unit B After pairing The connection is established between the paired main unit and sub unit Your system Neighboring system Main unit n IDA c E herd X SS 5 H IDA IDA Sub unit Sub unit B Pairing Continued paueis 1 19 1 Place the sub unit to be paired near the main unit Pair the main unit with the sub units one at a time 2 Check that the power of the main unit and the sub unit are turned on 3 Check that the S AIR ID of the main unit is the same as the S AIR ID of the sub unit 4 Press the PAIRING buttons on the rear panel of the main unit and the sub unit using a pointed object
8. when inserting the supplied wireless transceivers EZW RT10 or EZW RT10A Failure to do so may result in damage to the unit Notes Make sure to turn off the main unit and the sub units when inserting or removing the supplied wireless transceivers EZW RT10 or EZW RT104A Failure to do so may result in damage to the unit Do not touch the terminals of the supplied wireless transceivers EZW RT10 or EZW RT10A Do not insert any device other than the supplied wireless transceivers EZW RT10 or EZW RT10A into the EZW RT10 slot 2 S AIR ID selector Set the same S AIR ID for the main unit and the sub units For details on setting the S AIR ID see Establishing the S AIR connection page 18 FM AM antennas Find a location and an orientation that provide good reception and then set up the antenna Keep the antennas away from the power supply cord to avoid picking up noise Power Connect the power supply cord and the power cord to a wall socket To use the iPod Insert an iPod Dock Adapter into the iPod connector on the main unit before use For details on the supplied iPod Dock Adapters refer to the instructions supplied with the Dock Adapters To remove the iPod Dock P pull it up with your fingernail or a flat object using the slot inside the adapter mde Slot Li Continued S paueis 1 17 To use the remote Slide and remove the battery compartment lid and
9. Sony Corporation iPod is a trademark of Apple Inc registered in the U S and other countries The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Sony Corporation is under license Other trademarks and trade names are those of their respective owners All other trademarks and registered trademarks are of their respective holders In this manual and 9 marks are not specified 39 4 Table of Contents 6 UN PACKING see 7 Guide to parts and controls 8 Troubleshooting rd 32 MessaQ8s stitit eite tieiee 36 lt 36 Getting Started Hooking up the system 16 Establishing the S AIR connection 18 Setting the clock of the sub Ui eee 21 Selecting the S AIR mode 22 Listening to iPod music using the S AIR 23 Listening to the radio using the S AIR 25 Presetting radio stations 26 Using an optional AV system 27 Changing the display 28 Using the lt 29 Turning off the remote control function of the sub units 31 Changing the illumination brightn
10. away from the main unit Confirm the S AIR IDs of the main unit and the sub units Check the pairing setting Place so that the main unit and the sub units are closer Stop using any equipment that generates electromagnetic energy such as a microwave oven Place so that the main unit and the sub units are separated from other wireless devices Stop using any other wireless devices Change the S AIR ID settings of the main unit and the sub units Turn off the main unit and the sub units and then turn them on again Check that the power supply cord and the power cord are connected securely and the main unit and the sub units are turned on Increase the volume of the sub units Check that headphones are not connected to the headphones jack on the rear panel of the sub units Change the RF CHANGE setting on the main unit page 20 There is noise or the sound skips If you use another S AIR main unit place it more than 8 m away from the main unit Place so that the main unit and the sub units are closer Stop using any equipment that generates electromagnetic energy such as a microwave oven Place so that the main unit and the sub units are separated from other wireless devices Stop using any other wireless devices Change the S AIR ID settings of the main unit and the sub units Do not place a mobile phone near the main unit and the sub units as this may result in noise Change th
11. main unit may not function properly To prevent this you can turn off the remote control function of the sub units Use buttons on the sub unit whose remote control function you want to turn off 1 Press I D to turn off the unit 2 Press DISPLAY repeatedly until the clock is displayed 3 Press 1 while holding down CLOCK TIMER ENTER RMT OFF appears in the display and the sub unit is turned on If you try controlling the sub unit using the remote RMT OFF appears in the display and the sub unit will not accept the signal from the remote To turn on the remote control function Perform steps 1 and 3 above and check that RMT ON appears in the display Note Even when the remote control function is turned off I D and VOLUME on the remote will continue to function Changing the illumination brightness of the main unit Press ILLUMINATION repeatedly Each time you press the button the illumination brightness changes as follows Bright Darkened Off 319 32 Troubleshooting 1 Make sure the power supply cord and the power cord are correctly and firmly connected 2 Find your problem in the checklist below and take the indicated corrective action If the issue persists contact your nearest Sony dealer When bringing the product in for repairs be sure to bring in the entire system the main unit the sub units and wireless transceivers This product is
12. ohms unbalanced Intermediate frequency 10 7 MHz AM tuner section Tuning range 531 1 602 kHz 9 kHz step Antenna AM loop antenna external antenna terminal Intermediate frequency 450 kHz General Power requirements 230 V AC 50 60 Hz Power consumption 15 watts Dimensions w h d excluding the AC power supply unit Approx 295 x 43 x 110 mm Mass including the AC power supply unit Approx 1 1 kg Sub unit AIR SA15R Amplifier section DIN power output rated 3 3 watts 3 ohms at 1 kHz DIN Continuous RMS power output reference 4 4 watts 3 ohms at 1 kHz 10 THD Output Q stereo mini jack Accepts headphones with an impedance of 8 ohms or more Speaker section Speaker system Full range bass reflex type Speaker units 65 mm cone type 2 Nominal impedance 3 ohms Wireless transceiver EZW RT10 EZW RT10A Communication System S AIR Specification version 1 0 Frequency band 2 4000 GHz 2 4835 GHz Modulation method DSSS Power requirements DC 3 3 V 350 mA Dimensions w h d 50 x 13 x 60 mm Mass 24g General Power requirements 230 V AC 50 60 Hz Power consumption 15 watts Standby power consumption Max 1 watt Dimensions w h d Approx 300 x 136 x 115 mm Mass Approx 2 2 kg Design and specifications are subject to change without notice Halogenated flame retardants are not used in the certain printed wiring boards 5 3
13. 1 ILLUMINATION 31 Press to change the illumination brightness 2 BAND 25 Press to select FM or AM reception mode 3 SYSTEM MENU 20 23 26 35 Press to enter the system menu 5 iPod connector 17 23 27 Place an iPod on the connector to listen to audio contents stored in the iPod You need to connect the supplied iPod Dock Adapter first to use an iPod For details on the supplied iPod Dock Adapters refer to the instructions supplied with the iPod Dock Adapters s oJ1uo2 pue sued H 6 S AIR indicator Lights up when the main unit is turned on with the supplied wireless transceiver inserted 7 Unit TUNING SELECT 20 23 25 26 35 Press to tune in the desired station Press to select a menu item Remote TUNING 25 26 Press to tune in the desired station 8 ENTER 20 23 26 35 Press to enter the settings 9 Illumination 31 You can change the brightness using ILLUMINATION m Continued S 96 10 Display 11 11 Remote sensor 12 ANTENNA jacks 16 17 Connect the supplied FM lead antenna and AM loop antenna 13 POWER switch 18 32 Switch for turning the main unit on or off 14 iPod AUDIO OUT L R jacks 27 iPod VIDEO OUT jack 27 Connect an optional AV system such as a TV etc
14. 9 Compatible iPod models You can use the following iPod models on the main unit Update your iPod with the latest software before using it iPod touch 2nd generation iPod classic iPod 4th generation color display 40 iPod nano 4th generation video iPod nano 2nd generation aluminum iPod 4th generation iPod touch 1st iPod nano 3rd generation generation video iPod 5th generation iPod nano Ist video generation iPod mini Index A Alarm 29 Antennas 17 Automatic tuning 25 Batteries 18 Clock 21 Compatible iPod 40 Illumination 31 Installation 6 iPod Charging 25 Controlling 24 Listening 23 iPod AUDIO OUT L R 27 iPod Dock Adapters 17 iPod VIDEO OUT 27 M Main unit 8 MULTI SOURCE mode 22 0 Other component hookup 27 P Pairing 19 PARTY mode 22 Power Saving Mode 28 Presetting radio stations 26 R Radio 25 Remote 9 13 31 Reset 35 RF CHANGE 20 S S AIR 6 S AIR connection 18 S AIR ID 17 18 S AIR mode 22 Sub unit 12 T Timer Daily Timer 29 Sleep Timer 29 Troubleshooting 32 w Wireless transceiver 17 s1 4 0 419 429 E Others 43 Printed in China http www sony net um
15. S Q N Y 4 117 793 32 1 Wireless Audio system Operating Instructions AIR SA20PK DIGITAL WIRELESS 2008 Sony Corporation 2 To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To reduce the risk of fire do not cover the ventilation opening of the apparatus with newspapers tablecloths curtains etc Do not place the naked flame sources such as lighted candles on the apparatus To reduce the risk of fire or electric shock do not expose this apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus As the main plug is used to disconnect the unit from the mains connect the unit to an easily accessible AC outlet Should you notice an abnormality in the unit disconnect the main plug from the AC outlet immediately The unit is not disconnected from the mains as long as it is connected to the AC outlet even if the unit itself has been turned off Do not install the appliance in a confined space such as a bookcase or built in cabinet Do not expose batteries or apparatus with battery installed to excessive heat such as sunshine fire or the like The nameplate is located on the bottom exterior AIR SA15R only Excessive sound pressure from earphones and headphones can cause hearing loss Notice for customers the following information is only applicable to equipment sold in countries applying EU Direct
16. a system product and the entire system is needed to determine the location requiring repair If PROTECT appears on the display of the main unit Set the POWER switch on the rear panel to OFF to turn off the unit and then unplug the power supply cord After checking that there is no indication on the display reconnect the power supply cord and set the POWER switch to ON to turn on the unit If the issue persists contact your nearest Sony dealer If the STANDBY indicator on the sub unit flashes Immediately unplug the power cord and check if anything is blocking the ventilation holes on the rear panel of the unit After the STANDBY indicator stops flashing reconnect the power cord and turn on the unit If the issue persists contact your nearest Sony dealer General The remote does not function Remove any obstacles between the remote and the remote sensor and position the main unit and the sub units away from fluorescent lights Point the remote at the remote sensor Move the remote closer to the main unit or the sub units The remote control function of the sub unit is off Turn on the remote control function page 31 Check whether you are using the remote for the main unit to operate the main unit and the remote for the sub unit to operate the sub unit The S AIR indicators on the main unit and the sub units are turned off Check that the power supply cord and the
17. e RF CHANGE setting on the main unit page 20 Continued S sjeu10o 33 349 iPod There is no sound Make sure the iPod is connected securely Make sure the iPod is playing music Adjust the volume of the sub units Update your iPod to use the latest software The iPod cannot be operated by the main unit or the sub units Check that the iPod and the main unit are connected properly and that the main unit and the sub units are connected properly Depending on the iPod model you are using and its status it may not be possible to operate the iPod using the main unit or the sub units Update your iPod to use the latest software The sound is distorted Turn down the volume of the sub units Set the EQ setting of the iPod to Off or Flat The iPod cannot be charged Make sure the iPod is connected securely Check that the power supply cord is connected securely and the main unit is turned on The iPod track information cannot be obtained Depending on the iPod model you are using and its status it may not be possible to obtain the track information properly during playback Up to 16 characters can be displayed on the displays of the sub units Check that the track information has been entered into the iPod Video Photo image from the connected iPod does not appear on theTV screen Make the connection according to your AV system Switch t
18. e battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste On certain batteries this symbol might be used in combination with a chemical symbol The chemical symbols for mercury Hg or lead Pb are added if the battery contains more than 0 0005 mercury or 0 004 lead By ensuring these batteries are disposed of correctly you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery The recycling of the materials will help to conserve natural resources In case of products that for safety performance or data integrity reasons require a permanent connection with an incorporated battery this battery should be replaced by qualified service staff only To ensure that the battery will be treated properly hand over the product at end of life to the applicable collection point for the recycling of electrical and electronic equipment For all other batteries please view the section on how to remove the battery from the product safely Hand the battery over to the applicable collection point for the recycling of waste batteries For more detailed information about recycling of this product or battery please contact your local Civic Office your household waste disposal service or the shop where you purchased the product S AIR and its logo are trademarks of
19. eo of the connected iPod with an optional AV system 1 Connect an optional AV system such as a TV etc to the iPod AUDIO OUT L R jacks and or the iPod VIDEO OUT jack of the main unit using an optional audio cord and or video cable 2 Place an iPod on the iPod connector on the main unit 3 start playback of the iPod See Listening to iPod music using the S AIR connection page 23 Note The tuner s sound cannot be output through the iPod AUDIO OUT L R jacks Before enjoying video adjust the video settings on the iPod to the appropriate settings according to your situation Tip Even if you change the S AIR mode or the S AIR channel using PARTY CH audio and or video from the connected iPod will continue to be output from the iPod AUDIO L R jacks and or the iPod VIDEO OUT jack 27 28 Changing the display Using the main unit To view the information on the display Press DISPLAY on the remote Using the sub units To change the information on the display while the sub unit is on Press DISPLAY on the unit Each time you press the button the display changes as follows When the sub unit is connected to the main unit Information of the connected main unit Model name of the connected main unit Clock When the sub unit is not connected to the main unit S AIR UNLINKED Clock Yu Depending on the iPod model you are using up to 16 charact
20. ers of the following information can be viewed for example while playing the iPod Track name Artist name Album name Elapsed playing time of the track Characters that cannot be displayed appear as When listening to the radio the frequency or the station name is displayed 2 Displayed for about 8 seconds To turn off the display of the sub unit When the sub unit is turned off the clock is displayed You can turn off the clock display to minimize the amount of power consumed Power Saving Mode Press DISPLAY on the unit when the clock is displayed Press the button again to display the clock Note Regardless of the selected S AIR mode when the same S AIR channel is selected on multiple sub units and you change the display of any one of them the display on all sub units will change only when the information of the connected main unit is displayed Using the Timers The sub units offer two timer functions If you use the Daily Timer with the Sleep Timer the Sleep Timer has priority Use buttons on the unit to set the timers Sleep Timer You can fall asleep to music This function works even if the clock is not set Press SLEEP repeatedly Note Even if you set the timer no sound is output from the sub units if playback on the connected main unit ends within the set time period or if communication with the main unit is cut off Daily Timer You can wake up to the s
21. ess of the main unit 31 58 69 Features The AIR SA20PK is an S AIR compatible packaged product that consists of one S AIR main unit 15 and two S AIR sub units AIR SAI5R Connecting the S AIR main unit hereafter called Main unit with the S AIR sub units hereafter called Sub units using S AIR technology you can use each unit in a remote location For example you can install the sub units one in the study room and the other in the bedroom and then install the main unit in the living room You can then listen to the music from the main unit located in the living room by controlling the sub units You can also connect the main unit to an optional AV system such as a TV and on this optional AV system you can enjoy audio video and photo contents of an iPod which is connected to the main unit L p a c c y ELT yp m a Sub unit Sub unit Main unit and iPod AV system S AIR Sony Audio Interactive Radio frequency Recent times have seen the rapid spread of DVD media Digital Broadcasting and other high quality media To ensure that the subtle nuances of these high quality media are transmitted with no deterioration Sony has developed a technology called S AIR for the radio transmission of digital audio signals with no compression and has incorporated thi
22. h is not compatible with the MULTI SOURCE mode When the S AIR mode is set to set the main unit to the PARTY mode You MULTI SOURCE can then select the S AIR channel from the The iPod channel is internally S AIR sub unit activated Go to step 3 Continued 23 24 3 Start playback Operate the iPod to start playing the music You can also operate the iPod using the remote see To control the iPod using the main unit Using the sub units 1 Place an iPod on the iPod connector on the main unit 2 selectthe iPod channel Press S AIR CH repeatedly until iPod appears in the display 3 start playback Operate the iPod to start playing the music You can also operate the iPod using the remote see To control the iPod using the sub units To control the iPod using the main unit You can control your iPod with the following buttons on the remote To Press Start ei playback Pause ei playback To resume playback press BIE again Select a 4 You can scroll up or menu or down the iPod menus track for playback Skip atrack lt P gt P I Finda point Hold down Ke lt P 1 ina track during playback and release the button at the desired point To Press Choose the ENTER You can choose selected the selected item much item like the center button on the iPod Return to MENU You can return to the previous the previous menu much menu like
23. he TV input to the video input connected to the main unit Check that the TV output setting on the iPod is on Refer to the user s guide of your iPod Check that the iPod is compatible with video output Refer to the user s guide of your iPod Tuner Severe hum or noise or stations cannot be received TUNED or ST flashes on the display of the main unit Connect the antennas properly Find a location and an orientation that provide good reception and then set up the antennas again Keep the antennas away from the power supply cord to avoid picking up noise Connect a commercially available external antenna Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand Turn off nearby electrical equipment To reset the main unit to factory settings If the main unit still does not operate properly reset the main unit to factory settings 1 Disconnect and reconnect the power supply cord and then turn on the unit 2 Press SYSTEM MENU on the unit 3 Press TUNING SELECT on the unit repeatedly until RESET appears then press ENTER on the unit RESET OK appears 4 Press ENTER on the unit again to confirm the setting All user configured settings are deleted such as preset radio stations To reset the sub unit to factory settings Ifthe sub unit still does not operate properly reset the sub unit to factory settings 1 Disconnect and reconnec
24. igned for iPod only You cannot connect any other portable audio players Depending on the iPod model you are using and its status operations using the main unit and the sub units may not be accepted or the wrong operations may be performed Sony cannot accept responsibility in the event that data recorded to iPod is lost or damaged when using an iPod with this S AIR product Listening to the radio using the S AIR connection Using the main unit 1 Select the tuner channel When the S AIR mode is set to PARTY Press PARTY CH on the remote repeatedly until FM or AM appears in the display When the S AIR mode is set to MULTI SOURCE The tuner channel is internally activated Go to step 2 2 Select FM or AM Press BAND repeatedly 3 Perform automatic tuning Press and hold TUNING on the remote or TUNING SELECT on the unit until the frequency indication changes and then release AUTO lights up in the display Scanning stops automatically when a station is tuned in and then TUNED and ST for FM stereo programs only appear TUNED ST mous When you tune in station that provides RDS services the station name appears on the display Continued S 25 26 Using the sub units When a radio station is tuned on the main unit you can listen to that station by following the steps below To tune in a radio stat
25. in the du music using the S AIR The default setting is underlined connection MULTI SOURCE Use the sub units to listen to the music of Select this setting to listen to different an iPod connected to the main unit sound sources on each sub unit You can control the connected iPod from g PARTY either the main unit or the sub units 2 Jisten To use an iPod refer to the user s guide 9 sound source on multiple sub units 5 of your iPod To select the S AIR mode from the system menu sing the main unit 1 Press SYSTEM MENU on the unit U g amu 2 Press TUNING SELECT on the 1 Place an iPod on the iPod unit repeatedly until MODE appears connector as shown below then press ENTER on the unit 3 Press TUNING SELECT on the LI unit repeatedly to select MULTI or PARTY then press ENTER on the unit The selected S AIR mode appears on the display Now you are ready to listen to the To check the S AIR mode when the connected iPod using the sub units display of the main unit is turned off Press DISPLAY on the remote 2 Select the iPod channel Notes When the S AIR mode is set to When you change the S AIR mode the iPod PARTY channel is automatically selected for the Press PARTY CH on the remote connected sub units repeatedly until iPod appears in the When connecting the main unit to an S AIR display sub unit such as the AIR SA10 whic
26. insert the two supplied R03 size AAA batteries side first matching the polarities shown below Remote for the main unit RM ANUO45 Remote for the sub unit RM ANU046 Notes on using the remote With normal use the batteries should last for about six months Do not mix an old battery with a new one or mix different types of batteries If you do not use the remote for a long period of time remove the batteries to avoid damage from battery leakage and corrosion Establishing the S AIR connection You can easily establish the connection by setting the same S AIR ID for the main unit and the sub units 1 Check that the wireless transceivers are inserted securely to the main unit and the sub units page 17 2 Turn on the main unit and the sub units Set the POWER switch on the rear panel to ON The POWER indicator on the unit lights up Press 1 3 Set the same S AIR ID for the main unit and the sub units Set the S AIR ID selector on the rear panel to the desired S AIR ID Set the S AIR ID selector on the rear panel to the same S AIR ID as the main unit Tip The S AIR ID is set at the factory to A 4 Confirm the connection status Once the connection between the main unit and the sub units is established the S AIR indicators on the sub units light up and LINKED appears in the displays of the sub units for about 2 seconds Tip Up to 10 sub units sold separately
27. ion using the sub units that station needs to be preset beforehand see To call up a preset radio station using the sub units page 27 1 Select the tuner channel Press S AIR CH repeatedly until TUNER appears in the display 2 Select FM or AM Press and hold S AIR CH until FM changes to AM or vice versa To tune in a station with a weak signal using the main unit If TUNED does not appear and the scanning does not stop press TUNING on the remote or TUNING SELECT on the unit repeatedly to tune in the desired station To reduce static noise on a weak FM stereo station using the main unit 1 Press SYSTEM MENU on the unit 2 Press TUNING SELECT on the unit repeatedly until FM MODE appears then press ENTER on the unit 3 Press TUNING SELECT on the unit repeatedly until MONO appears then press ENTER on the unit There will be no stereo effect but the reception will improve Presetting radio stations You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number Use the main unit to preset the radio stations 1 Tune in the desired station See Listening to the radio using the S AIR connection page 25 2 Press SYSTEM MENU on the unit 3 Press TUNING SELECT on the unit repeatedly until MEMORY appears then press ENTER on the unit _ IND ST
28. ives The manufacturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan The Authorized Representative for EMC and product safety is Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product Applicable accessories Wireless Transceiver EZW RT10 EZW RT10A Disposal of waste batteries applicable in the European Union and other European countries with separate collection systems Pb This symbol on th
29. ound of the connected main unit at a preset time Make sure you have set the clock 1 Press VOLUME repeatedly to adjust the volume level while viewing the volume level indication on the display Press CLOCK TIMER MENU Press a lt PP I repeatedly to select TIMER then press CLOCK TIMER ENTER ON TIME appears and the hour indication flashes Set the time to start playing Press 1 PPI repeatedly to set the hour and then press CLOCK TIMER ENTER The minute indication flashes Use the procedure above to set the minute 5 Use the same procedure as in step 4 to set the time to stop playing 6 Press kea P1 repeatedly to select the desired option The default setting is underlined ALARM An alarm is output AUTO Sound from the connected main unit is output However an alarm sounds in the following cases When communication with the main unit is cut off When no sound is output from the main unit or the audio signal level is too low When the main unit is not ready for playback at the set start time Note that the alarm continues to sound even if the main unit becomes ready after the start time has passed 7 Press CLOCK TIMER ENTER The display shows the timer settings Continued S 29 30 8 If you selected ALARM in step 6 go to step 9 If you selected AUTO in step 6 prepare the sound source on the main unit iPod Select the track
30. power cord are connected securely and the main unit and the sub units are turned on Check that the supplied wireless transceivers are inserted securely to the main unit and the sub units page 17 Connecting the main unit and the sub units is not possible The S AIR indicator on the main unit is turned off and or the S AIR indicator on the sub unit flashes Check that the supplied wireless transceivers are inserted securely to the main unit and the sub units page 17 If you use another S AIR main unit place it more than 8 m away from the main unit Confirm the S AIR IDs of the main unit and the sub units The main unit is paired with another S AIR sub unit Pair the main unit with the sub unit you are using The main unit is paired with another S AIR sub unit Cancel pairing Place so that the main unit and the sub units are separated from other wireless devices Stop using any other wireless devices The main unit or the sub unit is turned off Make sure the power supply cord and the power cord are connected and turn on the main unit and the sub units The S AIR channel fails to change Check that the main unit and the sub units are connected properly If you are using an optional S AIR sub unit such as the AIR SA10 which is not compatible with the MULTI SOURCE mode set the main unit to the PARTY mode There is no sound If you use another S AIR main unit place it more than 8 m
31. rference or poor transmission may result In this case take the following steps Do not install the S AIR product near other wireless systems Do not use the S AIR product and the other wireless systems at the same time The transmission distance differs depending on the usage environment Find a location where transmission between the main unit and the sub units is most effective and install the main unit and the sub units there On safety Completely disconnect the power supply cord and the power cord from the wall socket mains if the main unit and the sub units are not going to be used for an extended period of time When unplugging the units always grip the plug Never pull the cord itself Should any solid object or liquid get into the main unit and the sub units unplug the units and have them checked by qualified personnel before operating them again The power supply cord and the power cord can be changed only by a qualified service facility On placement Do not place the main unit and the sub units in an inclined position or in locations that are extremely hot cold dusty dirty or humid or lacking adequate ventilation or subject to vibration direct sunlight or a bright light Be careful when placing the main unit and the sub units on surfaces that have been specially treated for example with wax oil polish as staining or discoloration of the surface may result On heat buildup
32. s technology into the EZW RT10 EZW RT10A This technology transfers digital audio signals with no compression using the 2 4 GHz band range of ISM band Industrial Scientific and Medical band such as wireless LANs and Bluetooth applications Unpacking Check that you have all the following items Bi Sub unit Sub unit AIR SA15R 2 Bi Main unit Main unit AIR SA15Ti 1 Wireless transceiver EZW RT10 or EZW RT10A 2 o Wireless transceiver EZW RT10 or EZW RT10A 1 i Remote RM ANU046 2 RO3 size AAA batteries 4 RO3 size AAA batteries 2 lt Bi Others Operating Instructions this FM lead antenna 1 manual provided in each One of the following two antennas is language supplied Warranty 1 or The same type of wireless transceivers and batteries are used for the main unit and the sub units AM loop antenna 1 iPod Dock Adapters 1 set 7 8 Guide to parts and controls Main unit AIR SA15Ti Wireless Audio Transmitter Front panel 1l2 3 AA 6 6 7 Rear panel Remote for the main unit 4 POWER indicator 18 Lights up when the main unit is turned on RM ANU045 23 1 18 22 7 2 19 20 21
33. st the volume 10 S AIR indicator 19 Lights up while the sub unit is connected to the main unit Flashes when the sub unit is not connected to the main unit 11 Remote sensor 12 Display 15 13 headphones jack Connect optional headphones 14 S AIR ID selector 17 18 Select the same S AIR ID as the main unit 15 PAIRING button 20 Press to perform pairing 16 EZW RT10 slot 17 Insert the supplied wireless transceiver 17 Battery compartment lid 18 Display PAIRING VAN YAT Nu UA UN 1 2 3 4 5 1 Timer indicator 29 2 Text information 3 Wireless strength Indicates the S AIR signal strength 4 Play Pause 5 PAIRING indicator 19 s oJ1uo2 pue sued epino H 15 16 Getting Started Hooking up the system Main unit g T LA OS G re L 3 Wall socket amp AM loop antenna FM lead antenna Extend it horizontally C White side for North American model D Brown side for other models Wireless transceiver Wireless transceiver Insert the supplied wireless transceiver EZW RT10 or EZW RT10A securely into the EZW RT10 slot on the rear panel of each unit Check the orientation of the V mark
34. t the power cord and then turn on the unit 2 Press B CANCEL DISPLAY and 1 on the unit at the same time All user configured settings such as timer clock etc are deleted 5 35 369 Messages CANCEL Time out without pairing COMPLETE Pairing is completed ID A Sets the S AIR ID to A ID B Sets the S AIR ID to B ID Sets the S AIR ID to C LINKED The sub unit is connected to the main unit PAIRING Pairing is in progress RMT OFF The sub units are not accepting signals from the remote because the remote control function is set to RMT OFF S AIR Displayed from the point power of the sub unit is turned on until connection with the main unit is established TIME NG The Daily Timer start and end times are set to the same time UNLINKED The connection with the main unit is cut off Displayed on the sub units only Precautions Notes on use of the S AIR product As the S AIR product transmits sound by radio waves sound may skip when radio waves are obstructed This is a characteristic of radio waves and is not a malfunction As the S AIR product transmits sound by radio waves equipment that generates electromagnetic energy such as a microwave oven may interfere with sound transmission As the S AIR product uses the radio waves that share the same frequency as other wireless systems such as wireless LAN or Bluetooth devices inte
35. the Menu button on the iPod To control the iPod using the sub units You can control your iPod with the following buttons on the remote or unit To Press Start gt playback Pause gt 11 or CANCEL playback To resume playback press or II Skipatrack HK amp P I Finda point Hold down Ke gt gt i ina track during playback and release the button at the desired point Adjust the VOLUME volume To use the main unit as a battery charger You can use the main unit as a battery charger for the iPod when the main unit is on The charging begins when the iPod is placed on the iPod connector The charging status appears in the iPod display For details refer to the user s guide of your iPod To stop charging the iPod remove the iPod or turn off the main unit Notes When placing or removing the iPod handle the iPod in the same angle as that of the iPod connector on the main unit and do not twist or sway the iPod to prevent connector damage Do not carry the main unit with an iPod set on the connector Doing so may cause a malfunction When placing or removing the iPod brace the main unit with one hand and take care not to press the controls of the iPod by mistake Before disconnecting the iPod pause playback You cannot adjust the volume using the main unit The volume level does not change even if adjusted on the iPod The main unit is des
36. to be played back by the timer and set the iPod to the pause mode Tuner Tune in the desired station see Listening to the radio using the S AIR connection page 25 and Presetting radio stations page 26 9 Press 1 0 to turn off the unit The sub unit turns on about 45 seconds before the preset time If the sub unit is on at the preset time the Daily Timer will not play To stop the alarm Press any button To activate or check the timer again 1 Press CLOCK TIMER MENU SELECT flashes in the display 2 Press CLOCK TIMER ENTER 3 Press 1 0 repeatedly to select TIMER 4 Press CLOCK TIMER ENTER To cancel the timer 1 Press CLOCK TIMER MENU SELECT flashes in the display 2 Press CLOCK TIMER ENTER 3 Press Kd gt Pl repeatedly to select OFF 4 Press CLOCK TIMER ENTER To change the setting Start over from step 1 Note Even when AUTO is selected in step 6 and the iPod is to be played using the timer timer playback may not start and the iPod may be set to the pause mode if the iPod was being played by another sub unit when the timer started operating In this case press B on the sub unit Tip The Daily Timer setting remains as long as the setting is not canceled manually Turning off the remote control function of the sub units When using the multiple sub units near each other all the sub units may receive the same signal from the remote and the
Download Pdf Manuals
Related Search