ENSEO spec. - Pdfstream.manualsonline.com
Contents
1. Copyright 2006 Enseo Inc Channel Options The EBS SP35 supports analog and digital channels from cable or over the air sources Note Air To receive over the air channels an antenna and additional equipment may be required Cable Digital cable channels may not be accessible if conditional access or subscriptions are required Setup henna Tuning Mode Cable Edit Channel List gt Clear Channel List b Auto Channel Install b Digital Channel Search b Tuning Mode Using arrow keys select either Air or Cable Edit Channel List A submenu with functions to add delete and manage channels Clear Channel List Used to delete the channel list programming Auto Channel Install Used to scan and install channels Digital Channel Search Used to search for digital channels available Note these channels will not be automatically entered into the channel lineup Digital channels require entry management on the Edit Channel List menu XK Enseo Copyright 2006 Enseo Inc Edit Channel List This submenu allows for manual add delete and management functions of channels Setup Channel List Channel 74 Channel 74 Include in List Yes Type Digital Browse Digital Channels gt Selection Method Direct Digital Channel 74 1 Label Board 3 Logo gt Usage Audio and Video Channel Using remote enter the numbers of the channel to manage Include in List Yes to include No to exclude Type Set2. This setting allows for the selection of allowing user settings for CC to be stored between power cycles or to always use a default setting on power on Select YES to override the previous user CC setting on power on or select NO to allow the previous user setting to be used on the next power on Captioning This setting allows an ON or OFF setting for CC as a default power on status Digital Captioning Mode This setting allows the selection of the CC mode to be used for the Digital Channels Analog Captioning Mode This setting allows the selection of the CC mode to be used for the Analog Channels X Enseo Copyright 2006 Enseo Inc n V Chip Options This submenu sets up default options for the V Chip settings V Chip Menu item Reset Access Code Default Limits Restore User Setting This setting allows for the selection of allowing user settings for V Chip to be stored between power cycles or to always use a default setting on power on Select YES to override the previous user V Chip setting on power on or select NO to allow the previous user setting to be used on the next power on V Chip Menu Item This setting controls whether the user has access to the V Chip selection and settings Selecting YES will allow the V Chip menu item to appear on the user menu Selecting NO will cause the V Chip settings to no be user accessible and they will not appear on the user menu Reset Access Code This is an open setting to allo
3. Connectors PO isk Assessment based on IEC60950 Standard CC Class B a oHS Se Control MTI to RS232 Communication Cable Ports MTI command protocol Clol J J D D T C E _ aa 9 NM N OO O O 5 D O r e O O aa FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Copyright 2006 Enseo Inc 21
4. Fnseo Copyright 2006 Enseo Inc 19 Q Which hospitality systems is the EBS SP35 Compatible With A The EBS SP35 is designed to be compatible with most major PPV Hospitality Systems including LodgeNet Tested and Certified Compatible OnCommand Tested and Certified Compatible SeaChange Tested and Compatible More Most lodging system operate on a similar standard of protocol commands for operation Ifa PPV provider is not listed above it is still likely that the EBS SP35 is capable of working with this provider Q Does the EBS SP35 support LG Pro ldiom decryption technology A The EBS SP35 includes the Pro ldiom decryption technology for support of HD PPV systems from LodgeNet and OnCommand using Pro Idiom Q How do receive technical support A For technical assistance or product repair contact Sony Customer Information Service Center CISC at 877 350 3477 Q What is the warranty on the EBS SP35 A The EBS SP35 has a limited warranty from Sony against material defects for a period of 12 months from purchase date For more information on the warranty refer to www sony com support Product Specification EBS SP35 Specifications OEMS _ COMMENTS ZEINA __ Total Power Consumption 2 5 Watts Typical 12V DC External Power Supply AM 8 VSB TSC 49 Q lt u O gt DEP O a O 3 3 O c a O 5 0 poor servicing With HDCP S e Outputs ptical E Analog Audio L R Audio 2 RCA
5. Format Menu item Yes Minimum Volume o Maximum Volume 99 Security Standard ESP Energy Savings Protection This menu item allow for a setting of a default time off to protect against a TV being left on when a guest leaves a room without turning off the TV The mode can be set On or Off and the hours of inactivity until it turns itself off can be 1 to 9 hours Source Menu Item This menu item is a Yes No selection and allows control over whether a user through the user menu has access to input selection Picture Format Menu Item This menu item is a Yes No selection and allows control over whether a user through the user menu has access to change the Image Format widescreen or native Note This option will be No on all Plasma monitors to prevent image retention Minimum Volume Set the available minimum volume from 0 to 99 Maximum Volume Sets the available maximum volume from 0 to 99 Security Provides a Standard and High level of security based on the determination of the system administrator If high security is needed please contact your Sony representative for details on this technical implementation KK Ens EO Copyright 2006 Enseo Inc Captioning Options This submenu is used to control the default values for the Closed Captioning function on the EBS SP35 device Setup Captioning Restore User Settings No Captioning Digital Captioning Mode cS 1 Analog Captioning Mode cci Restore User Setting
6. Images not to scale EBS SP35 Set Top Box Enseo HD1000 Q rw N Communication Cable HDMI Cable Audio Adapter Cable HDMI to DVI Adapter 12V DC Power Supply Note For connecting the EBS SP35 with the following Sony displays the HDMI to DVI Adapter and Audio Adapter Cable are required FWD 32LX1 R FWD 40LX1 FWD 50PX2 FWD 42PX2 FWD 42PV1 For other models LX2 and KLH the HDMI Cable will supply both video and audio Setting Up the EBS SP35 Making Connections The EBS SP35 is designed to function with Sony Professional LCD and Plasma displays which may differ in input types and connection configuration For questions on connections and specifications on specific Sony displays consult www sony com support FWD 32LX2 FWD 40LX2 Connections HDMI Models Connect HDMI cable to EBS SP35 Connect HDMI to Display Input 1 Connect the Communication cable to SP35 Connect 9 pin serial connector to Remote input on display Plug mini jack cable to Control S Out Connect Coax cable to ANTENNA input on box Connect PPV provider RJ12 to PPV input on Box Plug in 12V DC power adapter CONOORWND RS232 and Control S on option board BKM FW20 which is standard on the LX2 models PPV Provider Control Box XK Ens e0 Copyright 2006 Enseo Inc Sony Displays with DVI HDCP Digital Connections Connect HDMI cable to EBS SP35 Connect HDMI to DVI adapter to Display Input 1 Con
7. based on the Movie Rating system G Children and Family RUNG PG Parental Guidance Suggested EEE PG 13 Parental Guidance Special a3 Guidance to children under 13 R Restricted No one under 17 without an adult NC 17 No children under 17 X Adult content Adults only Not Rated Some films are not rated aaa e TE E na and other content is beyond NC 17 and withdrawn before rating Select Movie Rating Limit x Not Rated Use the arrow keys to highlight a box in the matrix and then use the 0 button on the remote is used to toggle between selections When finished move to the OK box and press 0 to save settings and exit Change Access Code The V Chip Access Code can be set through the set up process using this function No gt Change V Chip Access Code Enter New Code m U Re enter Code ie n Cancel Press O to select Copyright 2006 Enseo Inc 14 Service Options The EBS SP35 is an advanced media device with the ability of communicating through an RF network to maintain updated firmware and control The features outlined below are advanced functions designed for an integrated RF system This menu area is used to set up parameters for servicing the EBS SP35 or performing service functions Setup Service Update Channel 89 Channel 89 Allow Update Searching Yes start Firmware Update Restore Factory Settings gt Show Status Update Channel This feature is
8. on the Setup menu this item will not be visible on the User Menu Options Captioning Off Note Digital Captioning Mode csl The available inputs will be based on the Analog Captioning Mode CC1 model of Sony display and video Sleep Timer off expansion boards installed if any SAP No SOurce Tuner Picture Format Widescreen V Chip Options b Exit p Picture Format If made user accessible from the Setup Menu the user will have the ability to adjust the aspect ratio of content presented on the Sony Display If this feature is not enabled on the Setup menu this item will not be visible on the User Menu Options Captioning Note Digital Captioning Mode cs 1 On Plasma monitors user access to Analog Captioning Mode CC 1 Picture Format will be limited to prevent Sleep Timer Off the potential for image retention SAP No Source Tuner Native Picture Format Widescreen Widescreen V Chip Options a 4 3 Expanded Exit gt V Chip Options If made user accessible from the Setup Menu the user will have the ability to set and control V Chip settings to restrict content from being shown on the EBS SP35 If this feature is not enabled on the Setup menu this item will not be visible on the User Menu For information on how this feature operates please Ls _ 7 pyright 2006 Enseo Inc 17 OPERATION The EBS SP35 is an advanced HDTV and NTSC TV tuner with features that support lodging systems and stand alo
9. the hotel room or the Sony remote supplied with the Sony display These menus are available to users to enjoy the features of the EBS SP35 and Sony display Only a few control functions are available through the user menus On When Muted 3g ee pe A hee ca i a SAP Pr po Source Pictu re Fo rm at V Chip Options Exit Captioning This feature allows the selection of OFF ON and On When Muted Using the arrow buttons highlight the desired setting and then press the Left Arrow button to save and exit the field Digital Captioning Mode This allows the user to select the format of the CC signal for digital channels Analog Captioning Mode This allows the user to select the format of the CC signal for analog channels Sleep Timer The sleep timer function allows the user to set the TV to turn off automatically after a selected number of minutes Options Captioning Off Off Digital Captioning Mode cs 1 15 Min Analog Captioning Mode cCl 30 Min 7 Sf 45Min No 60Min Source Tuner 90 Min Picture Format Widescreen 120 Min V Chip Options b 180 Min Exit gt 240 Min Copyright 2006 Enseo Inc 16 Secondary Audio Programming SAP This menu item allows the user the option of turning on SAP audio if available Source If made user accessible from the Setup Menu the user will have the ability to select available inputs on the Sony Display for use of attached media devices If this feature is not enabled
10. to the remote All commands to control the display will be controlled by the EBS SP35 If you need to access the Sony display menus or features directly follow these steps 1 Make sure the EBS SP35 is connected to the Sony display by the communication cable RJ12 on SP35 and RS232 and Control S Out on display 2 Power off the Sony Display and EBS SP35 with the remote 3 Remove the Communication Cable from the SP35 4 Power the Sony Display back on with the remote The Sony display will now respond to the Sony remote for menu and other display functions Note If the Communication Cable is removed while the display is on the Sony display may not respond to the remote or buttons To correct this unplug the power to the display and EBS SP35 attached the Communication Cable between display and EBS SP35 Apply power to the display and EBS SP35 After the system boots up and returns active follow steps 2 4 above MK Fnseo Copyright 2006 Enseo Inc 18 TROUBLESHOOTING FAQ Troubleshooting Display Show Blank Screen and No Input The EBS SP35 is designed to only work with specific Sony displays To activate the video the EBS SP35 must communicate with the display via the Communication Cable Possible Remedies Check the power to the EBS SP35 Make sure that the green LED light is visible from the top of the box Check that the Communication cable is connected properly between the EBS SP35 and the Sony Display
11. used for setting a channel to perform firmware updates Using the numeric keys on the remote enter the channel that has been identified by your system administrator for firmware updates Allow Update Searching This YES NO selection either allows or prohibits the display from searching for an update channel for firmware updates Having this selected as YES will allow updates when the Update Channel needs to be changed for some reason Start Firmware Update To manually initial a firmware update press the Right arrow button on the remote from this menu line The SP35 will immediately begin the firmware update process and reboot when complete Note During a firmware update the Display and EBS SP35 should not be unplugged or turned off Doing so while firmware is being downloaded and upgraded on the device could damage the unit and make it unusable If the firmware update was initiated by mistake it will time out after 3 to 5 minutes Restore Factory Settings This function allows the EBS SP35 to be reset to the factory settings Changes channel lineup programming and other setup customizations will be lost and the SP35 will return to factory settings Show Status This menu item will activate a status window showing important information about the display EBS SP35 firmware versions and other diagnostic data KK Ens EO Copyright 2006 Enseo Inc USER MENU User menus are accessed using either the lodging remote provided in
12. Enseo Sony EBS SP35 User Guide HD 1004 PKG Aiton Enseo Inc 401 International Parkway Suite 100 Richardson Texas 75081 www Enseo com KK Ens eo Copyright 2006 Enseo Inc Introduction The EBS SP35 is a professional tri band tuner providing 8VSB QAM and NTSC tuner function for connection to a line of Sony Professional LCD and Plasma displays The EBS SP35 includes support for Pro ldiom decoding on lodging systems supporting this encryption technology This document outlines the set up and operation of the EBS SP35 For questions or to check for updated information on this product please check www sony com support for more information Table of Contents Hardware Setup Shipped Components Setting up the EBS SP35 Connections Powering On Menus Configuration General Operations Remote Control Functionality Navigating Menus Set Up Menu Channel Options Switch On Options On Screen Display Options Control Options Captioning Options V Chip Options Service Options User Menu Captioning Digital Captioning Mode Analog Captioning Mode Sleep Timer SAP Source Picture Format V Chip Options Operation General Operation Lodging Mode Stand Alone Mode Controlling the EBS SP10 and Display with supplied Sony remote Troubleshooting FAQ Technical Specifications FCC Statement XK Fnseo Copyright 2006 Enseo Inc Hardware Setup Supplied Accessories
13. many popular TV channels Usage Selection of Audio and Video default Audio only for music channels inputs or video only for video only usage A V Input Type Selection XK Enseo Copyright 2006 Enseo Inc Switch On Options This menu provides options for setting up default settings for when the display first turns on These settings are particularly useful in a lodging environment to be sure the display starts on the barker channel and at a pre defined volume setting Switch On a Channel 45 40 Restore Picture Format Widescreen Power Standby Channel Enter the channel that you would like the EBS SP35 to tune to when it turns on Use Restore to cancel the change Volume Set the numeric value from 0 to 99 that you would like to be used as the default volume level for the display Picture Format Select between different formats for the screen and content presented Options include Native This setting will show the aspect ratio of the source material 4 3 NSTC images will be shown with side bars Widescreen This setting will fill the screen with the image by stretching the image if necessary to create a 16 9 image Power This setting is for specialized applications and not generally used On Screen Display Options The On Screen Display Options settings provide for customization and set up of OSD options Setup On Screen Display Show Volume Indicator Yes Use 3 Digit Entry Yes Show Channel G
14. ne operation Lodging Mode The EBS SP35 will automatically function in a lodging mode when attached to a compatible PPV system The EBS SP35 will communicate with lodging system identify the system and the necessary communication protocols and immediately send commands to the Sony display necessary to function with the attached PPV system Stand Alone To control the EBS SP35 in stand alone mode the EBS SP35 must not be connected to PPV system If the display is connected to a PPV system first disconnect the RJ12 communication cable between the EBS SP35 and the PPV control box RJ12 is connected to CONTROL PPV In Stand Alone mode the EBS SP35 will respond to the Sony remote and other compatible PPV system remotes To access the User Menu in stand alone mode press the MENU button on the remote Note on LX2 remote The supplied remote controller for the Sony FWD 32LX2 and FWD 40LX2 does not have a Channel Up or Channel Down buttons To change channels on the EBS SP35 you can use the UP Arrow or Down Arrow on this remote or use any Sony TV remote or universal remote supporting the TV IR commands Controlling the Sony Display The EBS SP35 and Sony displays are designed to use the same remote control shipped with the Sony display while minimize conflicting commands that could cause the display and EBS SP35 to both react When the EBS SP35 is connected to the Sony Display by the Communication cable the Sony display will not respond
15. nect HDMI cable to HDMI to DVI adapter Connect L R audio to SP35 Connect mini jack audio to the Input 1 audio Connect the Communication cable to the input marked Display on the SP35 Connect the 9 pin serial connector on the Communication cable to the input labeled Remote on display 8 Plug mini jack cable to Control S Out 9 Connect Coax cable to RF IN on SP35 10 Connect PPV provider RJ12 to PPV input on SP35 11 Plug in 12V DC power adapter OonrkWND a PPV Provider Control Box Power Supply Note Sony FWD 42PX2 and FWD 42PV1 have connections located on the bottom of the display and in different configuration than shown above Initial Power On When the power is applied to the EBS SP35 with the external AC adapter the device will power on The power status of the EBS SP35 can be confirmed by viewing a lighted Green LED through the top cover of the set top box If this light is not seen check the connections of the power supply Menus Configuration Stand Alone vs Lodging Mode The EBS SP35 is designed to operate in a Pay Per View environment connected to a lodging system that uses protocols and commands to control the display and tuner The EBS SP35 may also be able to operate in a Stand Alone mode to provide basic TV tuning for the Sony Display When the EBS SP35 is connected to a compatible lodging system the SP35 will automatically recognize the lodging system and respond to the PPV commande
16. o The RJ12 phone jack style connector must be connected to the CONTROL DISPLAY input on the SP35 o The 9 Pin Serial connector must be connected to the REMOTE connection Note on the Sony Plasma monitors an Null Modem adapter may be necessary to provide communication over the RS232 connector o The 1 8 inch mini jack must be plugged into the Control S OUT port Make sure you are using the EBS SP35 with one of the following Sony displays L CD Models FWD 32LX2 FWD 32LX1 R KLH W26 FWD 40LX2 FWD 40LX1 KLH W32 Plasma Models FWD 50PX2 FWD 42PX2 FWD 42PV1 The KLH W26 KLH W32 models can support the EBS SP35 yet they require a BKM FW20 option card which is standard on the LX2 models The KLH models are designed to use the ICS SP30 card version of the HD Tuner The Display and or EBS SP35 Do Not Respond to Remote Possible Remedies Check that both the display and EBS SP35 have power attached Check that the Communication Cable is correctly attached o The 1 8 inch mini jack connector must be plugged into the Control S OUT connection on the display o Be sure that this plug is NOT plugged into the Control S IN My Display Does Not Respond to The Remote or Button on the Display Possible Remedies Itis possible that the Communication Cable became disconnected during operation and the display must be reset Review the Section Controlling the Sony Display on Page 18 for further details MK
17. r In Lodging Mode the control buttons and IR commands from the Sony remote will not control the Supported Remote Controls The EBS SP35 is designed to function with the remote control that shipped with the Sony display Because of differences in the display remotes in which not all remotes have the same available buttons some remotes may have limited functionality with the display remote In such case as standard Sony TV remote or universal remote using Sony IR commands can control the EBS SP35 in Stand Alone Mode XK Fnseo Copyright 2006 Enseo Inc Navigating Menus The menus in the operation of the EBS SP35 have been designed to use the Left Right Up Down buttons for most functions To return to a previous menu pressing the Left button Set Up Menu The EBS SP35 set up process includes a sequence of numbers pressed on the Sony remote to access the set up menus With the display and SP35 powered on press the following in sequence note when pressing buttons press the buttons to be sure the system receives the code Setup Menu code Up Right Left Mute If a button is pressed in error press the Down arrow to clear the code entries In the lodging environment a different remote or function may be enabled to provide additional security Setup ae Channel Options Switch On Options On Screen Display Options Control Options Captioning Options V Chip Options Service Options Exit an ee a a a a Setup Menu
18. uide Yes Channel Banner Contents Welcome Message Options XK Enseo Copyright 2006 Enseo Inc Show Volume Indicator This menu item is a Yes No selection for whether a visual representation on the volume adjustment should be shown on the screen when the user uses the volume up or down on the remote Use 3 Digit Entry This menu item is a Yes No selection for support of 3 digit numbers for channels over 99 and digital channels that may use a sub digit Show Channel Guide This menu item is a Yes No selection for whether a channel guide is active for the user to see the available channels on the SP35 Channel Banner Contents This menu item allows the selection of the content available on the display banner Selections include Show number The channel number Show Label The text label for a channel Show Logo The select graphic if any Show Number i Show Label When selecting or deselecting an option on this ry Show Logo sub menu ett Om com cole e Welcome Message Options This menu item provides for a way to have a welcome message shown on the display Show Message Yes No PAR saree Line 1 First line of text Setup Welcome Messag Line 2 Second line of text Show Message No Line 1 Line 2 XK Enseo Copyright 2006 Enseo Inc o Control Options This setup section provides system level settings for the EBS SP35 Setu p Control ESP off Hours 4 Source Menu item Yes Off Picture
19. up Channel List Channel 74 Include in List Yes Analog Type Digital Digital Browse Digital Channels gt A V Input Selection Method Direct Digital Channel 74 1 Label Board 3 Logo gt Usage Audio and Video Selection options include Digital Digital Channels Analog Analog Channel A V Input Channel mapped AV inputs Note Depending on the selection type the menu options will change for the Channel List menu Analog Type Selection setup Jee The options for an analog channel include a Channel US customized Label for the channel Addition of a include in List WES thumbnail logo for the channel and selection of Type Label Mole lok OIF Te ss lt audio video options for the channel Board 3 gt Audio and Video Copyright 2006 Enseo Inc Digital Type Selection Type Digital Browse Digital Channels gt Selection Method Direct Digital Channel Channel 74 Label Board 3 Program O Logo e Usage Audio Only The options for a digital channel include Browse Digital Channels Access to see available digital channels The Digital Channel Search from the Main Menu is required before this function will provide results Digital Channel This section provides for the entry of the Channel Primary digits and Sub Program digits for the known digital channel Label Editable text for the channel Logo Selectable menu of logos for adding a visual thumnail for
20. w for the reset of the code In set up mode this code can be overwritten without knowing the previous code This is useful incase the previous user forgot the code The code will be reset to the default code of 0000 Default Limits This section allow for various default values to be set for the EBS SP35 Select TV Ratings Select Movie Ratings Change Access Code Enable V Chip This setting is a YES NO selection By setting YES the default V Chip settings will be active when the EBS SP35 starts up Selecting NO disables the V Chip settings XK Enseo Copyright 2006 Enseo Inc Select TV Ratings This matrix allows for allowing or restricting various settings including the TV industry Parental Guide ratings and new specific ratings PEELS ET TV Y All Children TV Y7 Directed to Older Children BV VES bene TV G General Audience TV PG Parental Guidance Suggested TV 14 Parents Strongly Cautioned TV G TV MA Mutual Audience Only TV PG TV Y TV Y7 TV 14 X X FV Fantasy Violence cartoons VAM Xixi V Violence Block All Unblock All S Sexual Situations Press 0 to select toggle L Language D Suggestive Dialog Use the arrow keys to highlight a box in the matrix and then use the 0 button on the remote is used to toggle between selections When finished move to the OK box and press 0 to save settings and exit Select Movie Ratings This menu allows for the authorization or exclusion of content
Download Pdf Manuals
Related Search