8 Port HD/SD-SDI Switch User`s Guide
Contents
1. DC Power Jack 9 SYNC Signal Input 10 SDI Output 11 SYNC Signal Loop Out 12 SDI Input Avenview WwWW avenview com a 1 8 Installation To setup Avenview SW HDSDI 8X1 follow these steps for connecting to a device Connect SDI enable equipments to the output of SW HDSDI 8X1 Connect the SDI input sources to the inputs of SW HDSDI 8X1 Plug power adapter cable into 5V DC power jack of SW HDSDI 8X1 Use IR Remote RS232 or front panel push button to switch between inputs a a Section 2 Specifications Amplitude Within 800mV 3 lt 10 Rise Overshoot Less than 2 lt 10 Fall Overshoot Less than 2 lt 10 Long Time Jitter 0 195 ui lt 1 0 ui Timing Jitter 0 195 ui lt 1 0 ui Alignment Jitter 0 127 ui lt 0 2 ui Dimension L x W x H 7 4 x 4 9 x 1 7 Weight 890g 31 402 Environmental Avenview WwWW avenview com e Avenview Disclaimer While every precaution has been taken in the preparation of this document Avenview Inc assumes no liability with respect to the operation or use of Avenview hardware software or other products and documentation described herein for any act or omission of Avenview concerning such products or this documentation for any interruption of service loss or interruption of business loss of anticipatory profits or for punitive incidental or consequential damages in connection with the furnishing performance or use of the Avenview hardware soft2. US aO r E E E E A EE E 4 1 7 PDE O aa E ss varane sacar couesacansueer a auranees ancauceeuecoaeeenerseans 5 1 8 FS Sr WMI e E ote eevee E E E T E N 6 SECTION 2 50 CC CaN ONS arnese S E T 6 Avenview Www avenview com al Section 1 Getting Started 1 1 Important Safeguards Please read all of these instructions carefully before you use the device Save this manual for future reference What the warranty does not cover e Any product on which the serial number has been defaced modified or removed e Damage deterioration or malfunction resulting from e Accident misuse neglect fire water lightning or other acts of nature unauthorized product modification or failure to follow instructions supplied with the product e Repair or attempted repair by anyone not authorized by us e Any damage of the product due to shipment e Removal or installation of the product e Causes external to the product such as electric power fluctuation or failure e Use of supplies or parts not meeting our specifications e Normal wear and tear e Any other causes which does not relate to a product defect e Removal installation and set up service charges 1 2 Safety Instructions The SW HDSDI 8X1 8 Port HD SD SDI Switch has been tested for conformance to safety regulations and requirements and has been certified for international use However like all electronic equipments the SW HDSDI 8X1 should be used with care Read the followin
3. Avenview 8 Port HD SD SDI Switch User s Guide Models SW HDSDI 8X1 2008 Avenview Inc All rights reserved The contents of this document are provided in connection with Avenview Inc Avenview products Avenview makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice No license whether express implied or otherwise to any intellectual property rights is granted by this publication Except as set forth in Avenview Standard Terms and Conditions of Sale Avenview assumes no liability whatsoever and disclaims any express or implied warranty relating to its products including but not limited to the implied warranty of merchantability fitness for a particular purpose or infringement of any intellectual property right Reproduction of this manual or parts thereof in any form without the express written permission of Avenview Inc is strictly prohibited Avenview WwWW avenview com a Table of Contents SECU IOI GUNG Ua COG eecatccacen sence sant csae sc acetenoseaesatesosee E 3 1 1 PME D Sh UA IS vacate Sats tea EEE E cc EEEE AA AAE EEA 3 1 2 Salei IMSUFUCTIONS sr E 3 1 3 Regulatory Notices Federal Communications Commission FCC esessssessessseeresrrrereerrrrrresn 4 1 4 OU CUM eee ncecteticecaeetscest E E E E E ean 4 1 5 Pak EE CONO e EE 4 1 6 Boore
4. both HD SD SDI bit rates and the re transmits video signal without degradation SW HDSDI 8X1 perfectly displays SDI output to two displays SW HDSDI 8X1 is a cost effective SDI switcher and splitter HD SD SDI Switch 8 equalized SDI inputs Dual color LED indication of HD SD of the output SDI Automatic detection of the SDI input SYNC IN OUT Low cost 8X1 HD SD dual rate Switch with Dual Outputs Splitter Provides the equalized transmission path up to 300m 1000 feet for HD cases Multiple control by RS232 IR remote and push button 1 5 Package Contents Before you start the installation of the converter please check the package contents SW HDSDI 8X1 x1 Power Adapter 5VDC x1 IR Remote Control x1 User s Manual x1 1 6 Before Installation e Put the product in an even and stable location If the product falls down or drops it may cause an injury or malfunction Avenview WwWW avenview com a e Don t place the product in too high temperature over 50 C too low temperature under 0 C or high humidity e Use the DC power adapter with correct specifications If inappropriate power supply is used then it may cause a fire e Do not twist or pull by force ends of the optical cable It can cause malfunction 1 7 Panel Description FRONT PANEL 1 Inputs 2 Input Auto Detection 3 Output HD SD Detection 4 IR Remote 5 Power indicator 6 Push button REAR PANEL 7 Power Switch 8 5V
5. g safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit Do not dismantle the housing or modify the module Dismantling the housing or modifying the module may result in electrical shock or burn Refer all servicing to qualified service personnel Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards Keep the module away from liquids e Spillage into the housing may result in fire electrical shock or equipment damage If an object or liquid falls or spills on to the housing unplug the module immediately Have the module checked by a qualified service engineer before using it again e Do not use liquid or aerosol cleaners to clean this unit Always unplug the power to the device before cleaning Avenview Www avenview com Em 1 3 Regulatory Notices Federal Communications Commission FCC This equipment has been tested and found to comply with Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation Any changes or modifications made to this equipment may void the user s authority to operate this equipment 1 4 Introduction Avenview SW HDSDI 8X1 8 Port HD SD SDI Switch receives equalizes 8 SDI inputs perfectly switches the desired input to SDI equipped monitors or receivers The switch supports
6. ware or other products and documentation provided herein Avenview Inc reserves the right to make changes without further notice to a product or system described herein to improve reliability function or design With respect to Avenview products which this document relates Avenview disclaims all express or implied warranties regarding such products including but not limited to the implied warranties of merchantability fitness for a particular purpose and non infringement Avenview WwWW avenview com
Download Pdf Manuals
Related Search