Home
- Aristel
Contents
1. DECT Wireless Door Station AN WDS The wireless door phone AN WDS is designed to work on the AN105 DECT system along with the other DECT handsets Being wireless has its own advantages such as simple installation good reception low maintenance mobility etc Other features include door latch release auxiliary device connection external call button call indicator lamp and egress door open Door phone installation The Door phone can be either flush mounted as it is or surface mounted using the stainless steel surface mount box AN SMB Position the door phone upright so that the speaker is on the left hand side and the microphone is on the right hand side Connect a 12Vdc 1A power supply between Alt and Alt terminals on the green connection block making sure the polarity is correctly maintained Position the whip antenna so that the radiating element does not touch any object but is simply positioned vertically up or down in a free space outside the steel box Locate the base in such a way that it does not exceed 40m from the door phone and lies in a line of sight avoiding obstructions as much as possible When the door phone is powered up the Green LED in the door phone may flash slowly indicating that the door phone is in search mode Door phone registration 1 Power up the base and register the first handset as HS1 in the usual manner 2 Before registration check the existing registered devices by the following method Usin
2. ect the door latch between Alt and NO terminals Note If power from the Door phone is not required step 2 may be omitted A DCLIU may be connected between Alt and NO which may operate a door latch in turn Door phone Operation Press the door phone button to make a call HS1 will ring At the same time a ring tone will be heard at the door phone HS1 answers the call by pressing the green handset button HS1 can activate the door latch and open the door by pressing HS1 can also activate the Auxiliary Device 2 door for example by pressing 5 HS1 should terminate the call at the end by pressing the green handset button It is also possible to call the door phone HS2 from any other handset and activate the door latch to open the door Aristel Networks Pty Ltd l 01 2007 Page 2 2
3. g HS1 operate Up Down arrow key to select BS Setting then press INT MASTER PIN 0000 then press INT By the up down arrow key select Remove HS Remove HS M should appear If any other handsets are registered M234 etc may appear In that case handsets 2 3 and 4 should be removed by entering the corresponding HS number Press the Green Handset button to end programming 3 Using the HS1 register the Door phone as HS2 4 Toregister the Door phone select BS Setting using HS1 5 MASTER PIN 0000 6 Select New HS 7 Sub PIN 0000 and INT The RED LED at the base will start flashing 8 Press the RED Button on the door phone mother board 9 The RED LED on the door phone will start to flash quickly for some time and then flash slowly This is an indication that the door phone is registered 10 Door phone registration may be confirmed as in item 2 The display will be M2 11 The door phone is ready for use End programming by pressing the green handset button Aristel Networks Pty Ltd l 01 2007 Page 1 2 Door phone wiring diagram DECT AMPLIFIER Call Button q all j e mMeeeeeece ss P INDICATOR f EGRESS Input 12VDC 1A BUTTON GND AUXILIARY DEVICE ELECTRIC LOCK Door Latch installation 1 Connect a 12Vdc 1A power supply between Alt and Alt taking care polarity is maintained correctly 2 Short circuit Alt and C See note below 3 Conn
Download Pdf Manuals
Related Search
Related Contents
SCL3711 - SCM Microsystems cegard/Mini-MOD VH-2000 VH-2100 USER`S MANUAL - VTech Canada MANUAL DE USUARIO Rocketfish RF-QX3 User's Manual FD Trinitron Colour Television KV User Manual NOTICE CAVE A CIGARES Human resources module - EMIS - Eastern Cape Department of Copyright © All rights reserved.
Failed to retrieve file